I've created a desktop stand for this awesome p4 display, sharing in case anyone needs one.
https://makerworld.com/en/models/2490049-guition-p4-10inch-screen-stand#profileId-2736046
#Created a desk stand case for the ESP32-P4 JC8012P4A1 (10.1")
copper rampart
left knoll
nice!! Can I ask what the screen is like? in terms of quality, viewing angles etc
copper rampart
The screen is surprisingly good, given the price. Wide viewing angles, it looks crisp without looking like a blown up low res display. The p4 processor can keep up with the higher resolution screen. Only downside is the brightness isn't as strong as the 4inch screen I have, but unless you have the same thing being displayed side by side, you'd never know.
I think it's outstanding quality for £35.
left knoll
have u been able to read the RTC?
spare sorrel
small tundra
Printing now, thanks!
small tundra
Fits well. The press fit with the built in standoffs is smart.
formal merlin
fix could be to remove the back cover and make similar holes for the mic on the back of your case. also since you went for the bulky "old CRT tv" style case, there should be room for a speaker 🤷🏼♂️
copper rampart
True, mine doesn't have a speaker so I was never going to use it anyway
formal merlin
mine doesn't either but it has a plug for a speaker and there is a on board mic too (the one marked with red circle) , i tried to add holes but test version i printed in petg the press fit holes didn't fit so i dropped doing more, plan was a small grill for the outside of speaker, will try with pla one of the days..
flint patio
Is there also a 'portrait' version?
copper rampart
mine doesn't either but it has a plug for a speaker and there is a on board mic ...
yes I just used PLA, worked well for this job