#🔥︱curseforge-support

1 messages · Page 510 of 1

thorn blaze
#

Ok

signal ridge
#

For Windows: C:\CurseForge
For Mac: /Users/Shared/CurseForge

#

And this is what the app supports currently

digital roost
#

well ok thanks

spark ermine
#

Hello, I would like to play with a Lucky Block mod, but when I create a profile in Curse Forge and copy the mods into the folder, they are not shown to me ingame

sage dove
#

Curseforge Doesnt load when i open it, it just says lunching overwolf and then when its done it does nothing

thorn blaze
sage dove
glossy silo
#

how do I fix this?

fleet bear
glossy silo
#

ight ty

fading siren
#

sup, trying to figure out how to download modpacks. what do i have to download

signal ridge
fading siren
#

no

signal ridge
#

!getcf

red patioBOT
#
Looking to install the CurseForge app?
<:windows:798410728188936222> Windows

Minimum Requirements:

  • OS Version: 7, 8.1, 10
  • 64 bit Required.
  • 350MB storage space.
  • Microsoft .Net 4.8
  • Intel/AMD quad-core CPU
  • 8GB ram

Download: https://download.overwolf.com/install/Download?&PartnerId=4047

If you are having issues with the installer use the URL below to install Overwolf then go to the app store to download CurseForge.
https://content.overwolf.com/downloads/setup/latest/regular.html



<:mac:798410654418862130> Mac

Minimum Requirements:

  • OS Version 10.14 or newer.
  • 64 bit Required.

Download: https://curseforge.overwolf.com/downloads/curseforge-latest.dmg



:penguin: Linux

Minimum Requirements:
Yes.

Download: :person_shrugging:

signal ridge
#

Start with that

fading siren
#

ah ok

#

is there a video/guide to make it easier for you guys

signal ridge
#

you on windows or mac?

fading siren
#

instead of cluttering the channel with questions haha

#

windows

signal ridge
#

Questions are fine. Try the first link for windows then follow the installation instructions

fading siren
#

alright, thanks you so much!

#

also, where should i look for mod pack suggestions

#

is there a good website?

signal ridge
fading siren
#

ah ok, thank you so much for the help once again! i truly appreciate it 😁

signal ridge
#

np

tired fjord
#

can anyone help me make a server pack for my modpack

signal ridge
tired fjord
#

thx srry

wheat yoke
#

Hello, I am new to this, my apologies before hand. I have a Mac and trying to run CurseForge but getting stuck at the forging your library

#

all it says after failure is retry

#

Seems like we could not load Cursr Forge

#

any ideas?

lime charm
#

So, I made a modpack from the Curse Forge website, everything's approved and it's all kosher.
Problem is, whenever I try to use the download button, it just. Doesn't work. It takes me to the download page, I open up the Curse Forge link using the Curse Forge app, and then the modpack doesn't show up inside the app.

#

I believe my friend was having this issue too

signal ridge
#

Link the pack

lime charm
#

Doesn't show up in the search engine yet either, so I can't download it directly within the app

signal ridge
lime charm
#

So you can't download files into the app while the project is experimental?

signal ridge
#

!sync

red patioBOT
#
Sync and your Project.

CurseForge App and site do not share the same requirements! You can find things on the site but this does not mean it will be in the app!
For a mod to show up in the app:

  • Projects MUST have a file marked as RELEASE or BETA
  • Projects MUST be APPROVED
  • Projects MUST have a file marked for the GAME VERSION SELECTED/LOADED
  • Projects CAN'T be EXPERIMENTAL
  • Projects CAN'T be ABANDON

Files can take a while to show up in the app. If your files still have not shown up either your project is new and you have yet to mark a file as Release/Beta or there is issues with the sync system making it slow.

Vote this issue up if you would like to know when the last sync was! https://curseforge-ideas.overwolf.com/ideas/CF-I-1617

lime charm
#

Alright, thank you

#

Have a lovely day

vague bluff
#

so i have a problem

#

whenever i try to play any modpack from curseforge the game loads for a little while and then acts weird

#

uh

signal ridge
#

Care to explain more on that?

vague bluff
#

it loads vanilla minecraft 1.16.5 but "modded" though its really no difference from vanilla

#

it says "minecraft 1.16.5 modded" in the main menu

#

but there are no mods or anything

signal ridge
#

How did you install the pack?

vague bluff
#

i tried to check the game directory but its all in place

vague bluff
#

and when i clicked play in there and launched the game in the launcher itself this occured

signal ridge
#

link the pack you installed

vague bluff
#

enigmatica 6 and winter regrowth

#

those two packs are the last two played

#

ever since like 2 months ago

fresh lance
#

is this associated with forge the client thing

vague bluff
#

and they dont work but i dont think its just them im actually afraid to launch any pack now

fresh lance
#

bc i cant download 1.8 forge :/

#

i get this

#

Exception in thread "main" java.lang.ExceptionInInitializerError
at net.minecraftforge.installer.ClientInstall.getSponsorMessage(ClientInstall.java:326)
at net.minecraftforge.installer.InstallerAction.getSponsorMessage(InstallerAction.java:59)
at net.minecraftforge.installer.InstallerPanel.updateFilePath(InstallerPanel.java:236)
at net.minecraftforge.installer.InstallerPanel.<init>(InstallerPanel.java:217)
at net.minecraftforge.installer.SimpleInstaller.launchGui(SimpleInstaller.java:153)
at net.minecraftforge.installer.SimpleInstaller.main(SimpleInstaller.java:40)
Caused by: java.lang.ArrayIndexOutOfBoundsException: 1
at net.minecraftforge.installer.MirrorData.buildMirrorList(MirrorData.java:84)
at net.minecraftforge.installer.MirrorData.<init>(MirrorData.java:63)
at net.minecraftforge.installer.MirrorData.<clinit>(MirrorData.java:17)
... 6 more

#

in a txt file

signal ridge
fresh lance
#

can i install forge clients with curseforge?

vague bluff
#

nah

signal ridge
#

!mc-logs

red patioBOT
#
Where to find the log on the CurseForge Client.

Right-click the modpack profile icon OR click the CFmenu button in the modpack profile.
Click CFfolderOpen Folder.
Open the logs folder.
Find the file called latest.log and drag it into discord.

vague bluff
signal ridge
fresh lance
#

how so

signal ridge
#

!mc-installmods

red patioBOT
#
How to install mods in CurseForge App.
  1. Click + Create Custom Profile
  2. Name it, select the required Minecraft version, select the Forge version (usually the highest number), click Create.
  3. Click the profile icon.
  4. Click Add New Content
  5. Search and install the desired mods.
  6. Start the game!
How to install mods not on CurseForge.
  1. Right click the profile picture or Open the profile and click the CFmenu Icon next to the play button.
  2. Click CFfolderOpen Folder.
  3. Drag the mod(s) into the mods folder. (Note: Some mods will require others, to run. Make sure to read the instructions for the mod!)
  4. Start the game!
fresh lance
#

ily

fresh lance
#

if this works

#

i think

#

i can export the shiz to put it in my actual launcher

hardy spoke
#

what you mean actual launcher?
curseforge is an actual launcher

vague bluff
#

minecraft launcher

#

like

#

mojang launcher whatever

signal ridge
vague bluff
fresh lance
#

work

signal ridge
fresh lance
#

im also lazy

#

so

signal ridge
vague bluff
#

here

fresh lance
#

overwolf refuses to just work

#

lmao

signal ridge
#

Then using the cf app is the less lazy way. No need for extra copying and reinstalling forge and all that since it does it for you

signal ridge
fresh lance
#

no errors, win, just refuses to open

signal ridge
#

does overwolf open ? (if you have it)

fresh lance
signal ridge
#

!getcf unistall em both and try the second link for win

red patioBOT
#
Looking to install the CurseForge app?
<:windows:798410728188936222> Windows

Minimum Requirements:

  • OS Version: 7, 8.1, 10
  • 64 bit Required.
  • 350MB storage space.
  • Microsoft .Net 4.8
  • Intel/AMD quad-core CPU
  • 8GB ram

Download: https://download.overwolf.com/install/Download?&PartnerId=4047

If you are having issues with the installer use the URL below to install Overwolf then go to the app store to download CurseForge.
https://content.overwolf.com/downloads/setup/latest/regular.html



<:mac:798410654418862130> Mac

Minimum Requirements:

  • OS Version 10.14 or newer.
  • 64 bit Required.

Download: https://curseforge.overwolf.com/downloads/curseforge-latest.dmg



:penguin: Linux

Minimum Requirements:
Yes.

Download: :person_shrugging:

wide acorn
#

Hi there! I've been trying to upload a file to my public modpack on the Curseforge site, but the newest file/update has been in "Under Review" for over an hour. Is there any information about when it'll be finished and approved?

fresh lance
signal ridge
fresh lance
#

uh

#

how do i access my instance folder

signal ridge
#

Do you know what it was set too before?

fresh lance
#

?

signal ridge
#

!mc-path

red patioBOT
#

**Minecraft Files should NOT be installed inside the following locations
.minecraft folder.
OneDrive folders.
Desktop folder.
Drive roots I.E. Directly into the C:\ drive.
iCloud enabled folders.
or any other cloud saved folder.

If any of the above are in the path you need to change/move it by following the instructions below!**

If Minecraft is not installed in CurseForge App, start here.
  1. Click the cf in the top left.
  2. Select Minecraft from the list of games.
  3. Select the Standard option to Install to.
    OR
    3b. Select the Advanced option if you wish to change the folder location.
  4. Click Continue.
If Minecraft is installed in CurseForge App, follow these steps.
  1. Click the CFsettings in the bottom left.
  2. Select the Minecraft tab.
  3. Click Change.
  4. Make a folder in the root directory called CurseForge.
  5. Select the folder you just made.
    The text box should show something like the following:
    For Windows: C:\CurseForge
    For Mac: /Users/Shared/CurseForge
fresh lance
#

found it

red patioBOT
#
  1. Click on the Minecraft Tab on the Left side of the CurseForge App.
  2. Click CFmenu button next to the Create Custom Profile option.
  3. Click CFrepair Repair Installation option.
  4. Play game.

NOTE: You will not lose any modpacks or worlds, These are saved in the Instances folder. DO NOT TOUCH THIS FOLDER OR YOU WILL LOSE EVERYTHING

signal ridge
vague bluff
#

@signal ridge ping me when you find out what the problem is pls

vague bluff
#

what is that

signal ridge
vague bluff
#

bruh

#

ok

#

im blind

wide acorn
#

Hi there! I've been trying to upload a file to my public modpack on the Curseforge site, but the newest file/update has been in "Under Review" for over an hour. Is there any information about when it'll be finished and approved?

red patioBOT
#

It is 12:32AM on Thursday for CurseForge my dudes.

Project Moderation Time

Project/File moderation is done on;
Sunday, Monday, Tuesday, Wednesday, Thursday: 10AM - 6PM GMT+2
Friday, Saturday: No Moderation!

This process is First in, First out. Thus files submitted late in the work day may not be checked until the next work day.

New Projects or uploads requiring manual approval: 1-3 Working Days
Updates to approved projects not needing manual approval: 1 Hour

File sync to the Curseforge app may take up to 24 hours after approval.

wide acorn
#

Alright thank

#

s

fresh lance
#

great

#

i cant open my normal mc launcher now.

#

:/

#

it opens overwolfs

#

nvm i had an instance open

terse lark
#

i have a problem whenver i try launchcing the curse forge ap it just shows an error,"oopsie that wasn't supposed to happen" and asks me to try again. When i launch on my browser it says curseforge cant provide a secure connection.

fading siren
# red patio

can someone send the windows download link here? can’t copy the link from my phone to my pc

#

nvm

vague bluff
#

thats what curseforge said

limber needle
#

ive been trying to update the pixelmon modpack to the latest update but it just gets stuck at 42% while trying to download the actual pixelmon mod

vague bluff
#

and also this

fading siren
#

so you install the modpack on curseforge

#

then what

vague bluff
#

click play

#

it redirects you to minecraft launcher

#

i guess

fading siren
#

alright sounds good

#

why the I guess?

#

should i be logging in through Microsoft or Mojang?

vague bluff
#

mojang if you havent migrated yet

#

they will make you migrate later tho lmao

fading siren
#

is the migration bad?

vague bluff
#

or disable your account

vague bluff
#

read about it on their site

fading siren
#

K

vague bluff
#

@signal ridge actually, thank you, it worked

limber needle
#

this has been like this for more than 20 minutes

#

i dont know why its like this

#

but i really need help

lyric crescent
#

internet issue

limber needle
#

thats it?

fleet bear
#

your internet is slow

#

try a better source or close everything else

limber needle
#

ok

fading siren
#

huh, loaded into atm6 for the first time and the frames are really bad, minecraft is always smooth on my pc and runs other high end games fine so I’m not sure what the issue is

#

my pc doesn’t sound like it’s using much to run the solo server too which is odd

signal ridge
#

How much memory have you alocated to the curseforge app?

fading siren
#

where can I check that? and i have the app closed

#

Is that a problem?

signal ridge
#

!mc-ram

red patioBOT
#
How to set Global Minecraft RAM value.
  1. Click the CFsettings icon in the bottom left to open settings.
  2. Click the Minecraft tab.
  3. Scroll down.
  4. Slide slider to recommended ram range as seen below.
signal ridge
#

Should be good between 6-8gb

azure siren
#

I cant install Minecraft mods it says that in the red bar

solemn shore
#

Any one know what’s causing this I’m trying to launch a forge 1.12.2 mod pack and it always crashes when it gets to step 2

signal ridge
#

If you made it add the mod jeid

fading siren
#

Ah ok, it was on 4gb of ram

signal ridge
#

Try increasing it

fading siren
#

Should I switch it to 8?

dense cloak
#

6-8 is recommended.

fading siren
#

Is higher bad?

dense cloak
#

Yes.

fading siren
#

K

#

And should I keep the launcher open/running when playing?

signal ridge
#

I wouldnt go any higher then 10. After that your lookong at other issues

dense cloak
#

Anything above 8 will not work.

fading siren
#

K

dense cloak
fading siren
#

Any pros to running it i the background?

dense cloak
#

No.

fading siren
#

Might as well close it then, thanks!

dense cloak
#

May be useful if your testing stuff or quickly switching between things, otherwise your choice.

fading siren
#

if I changed the ram should I restart my game?

dense cloak
#

Yes.

fading siren
#

7.5gb good or 8

dense cloak
#

Just do 6, 6.5, 7, 7.5 then 8 and see which is best.

fading siren
#

K

dense cloak
#

Just slowly raise it till it works the you want it.

fading siren
#

What’s the issue with higher usage

#

Not really a pc guy

dense cloak
#

I'll let someone else explain that. It's complicated.

fading siren
#

Maybe just give an easy/simple answer?

dense cloak
#

Java's GC (Garbage Collector) has to basically clear a lot more RAM every so often, and when it does it'll cause FPS spikes.

azure siren
#

I cant install Minecraft mods it says that in the red bar

dense cloak
azure siren
#

ok

#

thanks

fading siren
#

What’s Java(TM) platform SE binary in the task manager

#

Does it have to do with running the game

dense cloak
#

Yes.

#

When force quitting that it'll force quit the game.

#

MC's launcher is stupid and will think the game crashed when doing so, so ignore it.

#

@fading siren

fading siren
#

yea?

fresh lance
#

why dont worlds come up

#

lan worlds*

dense cloak
fresh lance
#

me and my laptop so yes we are on the same network

#

do the mods have to be the exact same

dense cloak
#

Yes.

fresh lance
#

for it to come up??

#

bruh

dense cloak
# fading siren yea?

Yes.
When force quitting that it'll force quit the game.
MC's launcher is stupid and will think the game crashed when doing so, so ignore it.

fading siren
#

Gotcha

woven fiber
#

i have an issue when i try and load my custom modpack for my friends i open it then click play the launcher dispensers and then i get an exit code. there is no crash logs so i am kinda lost

red patioBOT
#
Where to find the log on the CurseForge Client.

Right-click the modpack profile icon OR click the CFmenu button in the modpack profile.
Click CFfolderOpen Folder.
Open the logs folder.
Find the file called latest.log and drag it into discord.

woven fiber
#

ok one sec

#

there

signal ridge
red patioBOT
#
  1. Click on the Minecraft Tab on the Left side of the CurseForge App.
  2. Click CFmenu button next to the Create Custom Profile option.
  3. Click CFrepair Repair Installation option.
  4. Play game.

NOTE: You will not lose any modpacks or worlds, These are saved in the Instances folder. DO NOT TOUCH THIS FOLDER OR YOU WILL LOSE EVERYTHING

woven fiber
#

thanks

vagrant nymph
#

Hello!! this is the screen I'm getting when trying to load curseforge. any ideas how to get around this?

rapid stone
#

What do I do if the forge installer says make changes to ur device ur when I click allow it does nothing

signal ridge
#

Or do you mean Curseforge? Forge =/= Curseforge

rapid stone
#

Curseforge

signal ridge
#

Then say yes, the cf app is safe

rapid stone
#

I’m saying I clicked allow but it did nothing

signal ridge
#

ah

#

!getcf try the second link

red patioBOT
#
Looking to install the CurseForge app?
<:windows:798410728188936222> Windows

Minimum Requirements:

  • OS Version: 7, 8.1, 10
  • 64 bit Required.
  • 350MB storage space.
  • Microsoft .Net 4.8
  • Intel/AMD quad-core CPU
  • 8GB ram

Download: https://download.overwolf.com/install/Download?&PartnerId=4047

If you are having issues with the installer use the URL below to install Overwolf then go to the app store to download CurseForge.
https://content.overwolf.com/downloads/setup/latest/regular.html



<:mac:798410654418862130> Mac

Minimum Requirements:

  • OS Version 10.14 or newer.
  • 64 bit Required.

Download: https://curseforge.overwolf.com/downloads/curseforge-latest.dmg



:penguin: Linux

Minimum Requirements:
Yes.

Download: :person_shrugging:

rapid stone
#

Thanks

#

I worked

#

It*

thin wedge
#

This error happens when I try to join my server when playing "All The Mods" through CurseForge. Is there a fix for this?

smoky glen
topaz hawk
#

Hey I uploaded a custom modpack as a project a few days ago and it just got approved for use. So now I'm trying to download it to make sure everything is working properly and it wont download. I cannot find it under browse modpacks in the curseforege app or website and when I click install from the project page the app opens but, doesn't download the pack. Any ideas on what might be wrong?

digital roost
#

anyone

#

know

#

why is this?

signal ridge
digital roost
signal ridge
signal ridge
digital roost
#

forge

digital roost
signal ridge
digital roost
#

as i said

signal ridge
#

let me rephrase. Client or server

digital roost
#

client

signal ridge
#

Why not just use the curseforge app? Saves you from forge install issues

signal ridge
#

Do you have the curseforge app installed?

signal ridge
red patioBOT
#
Sync and your Project.

CurseForge App and site do not share the same requirements! You can find things on the site but this does not mean it will be in the app!
For a mod to show up in the app:

  • Projects MUST have a file marked as RELEASE or BETA
  • Projects MUST be APPROVED
  • Projects MUST have a file marked for the GAME VERSION SELECTED/LOADED
  • Projects CAN'T be EXPERIMENTAL
  • Projects CAN'T be ABANDON

Files can take a while to show up in the app. If your files still have not shown up either your project is new and you have yet to mark a file as Release/Beta or there is issues with the sync system making it slow.

Vote this issue up if you would like to know when the last sync was! https://curseforge-ideas.overwolf.com/ideas/CF-I-1617

digital roost
#

idk how to

signal ridge
#

!getcf

red patioBOT
#
Looking to install the CurseForge app?
<:windows:798410728188936222> Windows

Minimum Requirements:

  • OS Version: 7, 8.1, 10
  • 64 bit Required.
  • 350MB storage space.
  • Microsoft .Net 4.8
  • Intel/AMD quad-core CPU
  • 8GB ram

Download: https://download.overwolf.com/install/Download?&PartnerId=4047

If you are having issues with the installer use the URL below to install Overwolf then go to the app store to download CurseForge.
https://content.overwolf.com/downloads/setup/latest/regular.html



<:mac:798410654418862130> Mac

Minimum Requirements:

  • OS Version 10.14 or newer.
  • 64 bit Required.

Download: https://curseforge.overwolf.com/downloads/curseforge-latest.dmg



:penguin: Linux

Minimum Requirements:
Yes.

Download: :person_shrugging:

solemn shore
#

So I got my custom mod pack to work but now it says it ran out of memory and crashes how do I fix that

vestal bluff
#

oop.

topaz hawk
#

Thanks

signal ridge
#

!notcf

red patioBOT
#

The question you are asking about isn't related to CurseForge. Please use the appropriate game rooms by getting the role from #786424115535544350 or use #👽︱game-support for help.

This room is only for CurseForge Owned & Maintained features/services.

thin wedge
#

My bad

signal ridge
vestal bluff
#

^

lyric crescent
#

dont need the extra commentary

vestal bluff
#

i was trying to figure out the words but i coudlnt

#

couldnt

#

im not a computer nerd.

dusk kiln
#

hey i downloaded the server pack and ran it and everything but i dont know what ip to use to join to see if its working

lyric crescent
#

!notcf

red patioBOT
#

The question you are asking about isn't related to CurseForge. Please use the appropriate game rooms by getting the role from #786424115535544350 or use #👽︱game-support for help.

This room is only for CurseForge Owned & Maintained features/services.

dusk kiln
#

? its a curseforge server

digital roost
signal ridge
lyric crescent
#

curseforge doesnt have servers, or anything to do with servers at all

signal ridge
digital roost
#

and use that

signal ridge
#

!mc-installmods

red patioBOT
#
How to install mods in CurseForge App.
  1. Click + Create Custom Profile
  2. Name it, select the required Minecraft version, select the Forge version (usually the highest number), click Create.
  3. Click the profile icon.
  4. Click Add New Content
  5. Search and install the desired mods.
  6. Start the game!
How to install mods not on CurseForge.
  1. Right click the profile picture or Open the profile and click the CFmenu Icon next to the play button.
  2. Click CFfolderOpen Folder.
  3. Drag the mod(s) into the mods folder. (Note: Some mods will require others, to run. Make sure to read the instructions for the mod!)
  4. Start the game!
solemn shore
#

Dose increasing the allocated memory speed up launch time for Minecraft mod packs?

red patioBOT
#
How to set Global Minecraft RAM value.
  1. Click the CFsettings icon in the bottom left to open settings.
  2. Click the Minecraft tab.
  3. Scroll down.
  4. Slide slider to recommended ram range as seen below.
signal ridge
#

so glad I cant read tonight.

#

It can help sometimes yes

solemn shore
#

Ok thanks

#

I already have to allocate 6000 mb just to prevent crashing

signal ridge
#

Other things do matter as well, cpu, graphics card as well

#

What pack is this?

solemn shore
#

It’s a custom modpack

signal ridge
#

ah. How many mods?

solemn shore
#

About 156 on 1.12.2

signal ridge
#

hmm ok.

solemn shore
#

Is that a bit overboard?

signal ridge
#

Depends on you. seen pack with more seen some with less

solemn shore
#

Ok thanks so much for all the help

#

I have one final problem

#

Is there a way to have Minecraft just enough items to load fast?

frosty field
#

HI is there anyone who can help me with the onedrive situation, I'm trying to download mods for minecraft but it says curseforge doesnt work with onedrive, Ive unlinked it from my pc and the problem persists

red patioBOT
#

**Minecraft Files should NOT be installed inside the following locations
.minecraft folder.
OneDrive folders.
Desktop folder.
Drive roots I.E. Directly into the C:\ drive.
iCloud enabled folders.
or any other cloud saved folder.

If any of the above are in the path you need to change/move it by following the instructions below!**

If Minecraft is not installed in CurseForge App, start here.
  1. Click the cf in the top left.
  2. Select Minecraft from the list of games.
  3. Select the Standard option to Install to.
    OR
    3b. Select the Advanced option if you wish to change the folder location.
  4. Click Continue.
If Minecraft is installed in CurseForge App, follow these steps.
  1. Click the CFsettings in the bottom left.
  2. Select the Minecraft tab.
  3. Click Change.
  4. Make a folder in the root directory called CurseForge.
  5. Select the folder you just made.
    The text box should show something like the following:
    For Windows: C:\CurseForge
    For Mac: /Users/Shared/CurseForge
lime haven
#

Im attempting to update Enigmatica 2 Expert but all it says is "cannot update, files already in use. Please exit any applications that may be using the files in this profile folder.". It has said this for a while. i close down curse forge and run it as admin to see if that works and still no dice.

#

this is the only modpack that it does that with

signal ridge
lime haven
#

it is

signal ridge
#

win or mac?

lime haven
#

win

signal ridge
#

check task manager. or just reboot your pc either works

lime haven
#

ill try the pc reboot since i have checked task manager

#

still didn't work

signal ridge
#

Same error?

lime haven
#

yup

signal ridge
#

Shouldnt be after a pc reboot, Did you try to play the pack after reboot? or straight to update?

lime haven
#

the update

#

the pack works fine

#

it's just stuck at 1.75 which is a version that i can't complete of the game

#

rs solder breaks a quest

signal ridge
#

Could try updating to a new profile then copy the world over to the new pack. (copy not cut)

lime haven
#

i actually think its because the files are locked

#

when i try to delete it after i make a backup it says that they are locked

signal ridge
#

Reboot should have fixed that.

lime haven
#

i found a way to delete the profile so i think i might try that

signal ridge
#

Just know if you deleted the profile to back up your world.

lime haven
#

im just going to full delete it

#

i think i have it backed up but if i don't then its whatever

#

atleast i'll be able to play the modpack again

manic osprey
#

can someone plz help me download stoneblock 2 for my server

signal ridge
#

!notcf

red patioBOT
#

The question you are asking about isn't related to CurseForge. Please use the appropriate game rooms by getting the role from #786424115535544350 or use #👽︱game-support for help.

This room is only for CurseForge Owned & Maintained features/services.

sacred bobcat
#

can i have some help

#

i cant run a mod it crashes if i run it it says exit code 0 if anyone know how to fix it can someone pls tell me

#

:(((((

keen mesa
#

hi

#

is there any mod

#

through we can go inside any block or

#

mobs

queen storm
#

How about using less enters and keep things in 1 message

keen mesa
#

ok

keen mesa
teal stag
#

Im trying to make a modpack and i want to add ore spawn however i cant find it at all can someone give me a link or something

teal stag
#

so theey dont allow it?

queen storm
#

No

oblique obsidian
#

Minecraft modpacks are slowing donw my internet, does any1 know how to fix this?

mint stratus
#

anyone know how to fix this so im trying to download curse and it just keeps saying connection error and when i downloaded curse on my laptop awhile ago i had no problems and i tried to let it through the firewall but it didnt pop up in the file

mint stratus
oblique obsidian
#

wait

queen storm
oblique obsidian
#

without minecraft

#

theres no error message

#

its just lag

mint stratus
queen storm
oblique obsidian
#

my bad

queen storm
digital roost
#

can anyone help me with this?

queen storm
red patioBOT
#

The question you are asking about isn't related to CurseForge. Please use the appropriate game rooms by getting the role from #786424115535544350 or use #👽︱game-support for help.

This room is only for CurseForge Owned & Maintained features/services.

digital roost
#

dude i downloaded the server from the curseforge app at download server pack

crisp cedar
queen storm
mint stratus
#

so any info on my situation on how to fix it?

oblique obsidian
#

same

mint stratus
#

i know you guys are busy and its late but just wondering

queen storm
mint stratus
#

oh lol its almost 1 for me

static violet
#

could anyone help me with this?

#

it's been doing this for quite some day

queen storm
static violet
#

yes

#

I tried to

#

doesn't work

static violet
oblique obsidian
#

have u tried restarting

static violet
mint stratus
#

alright its decently late for me so imma head out ill ask tomorrow

unborn basin
# mint stratus

Hey. did things work out for you? If not can you please send me your overwolf logs?

oblique obsidian
#

Minecraft modpacks are slowing donw my internet, does any1 know how to fix this?

viral briar
#

well if you are downloading them then of course it will.

oblique obsidian
#

not downloading

#

when i play

viral briar
#

only things I can suggest is to reset your router/modem , make sure other apps are not downloading updates and such.

digital tinsel
#

origins mod pack wont download due to manifest error?

queen storm
keen mesa
#

@queen storm it has some hours

#

and no reply

#

tell me what to do

queen storm
#

You wait longer or start searching yourself

keen mesa
#

ok

digital tinsel
strong crater
#

how do i play on the app ofline

queen storm
queen storm
#

As in url

queen storm
digital tinsel
#

oh ok thank you

pastel grail
#

curseforge problem i can't download minecraft mod list

queen storm
viscid fiber
#

can someone help curse forge wont load

queen storm
viscid fiber
#

crap

#

nvm

#

its all good sorry

pastel grail
queen storm
pastel grail
pastel grail
queen storm
#

So it does not open the import action?

sudden anvil
#

Hello I have a problem I created a minecraft modpack all has been approved but I cannot find it in curse forge but other person can manage it

#

please help me

red patioBOT
#
Sync and your Project.

CurseForge App and site do not share the same requirements! You can find things on the site but this does not mean it will be in the app!
For a mod to show up in the app:

  • Projects MUST have a file marked as RELEASE or BETA
  • Projects MUST be APPROVED
  • Projects MUST have a file marked for the GAME VERSION SELECTED/LOADED
  • Projects CAN'T be EXPERIMENTAL
  • Projects CAN'T be ABANDON

Files can take a while to show up in the app. If your files still have not shown up either your project is new and you have yet to mark a file as Release/Beta or there is issues with the sync system making it slow.

Vote this issue up if you would like to know when the last sync was! https://curseforge-ideas.overwolf.com/ideas/CF-I-1617

queen storm
#

Random guess

pastel grail
queen storm
#

!ticket-site

red patioBOT
#
:bug: Reporting via Website :bug:

Can't open the app or would rather use the website? You can do so here: https://support.curseforge.com/en/support/tickets/new

Fill out the form with accurate detailed information, "It doesn't work" isn't helpful! What exactly doesn't work and why doesn't it work should be easy to answer!

Make sure to upload your Overwolf logs with the Upload File option on the ticket, information on how to get these logs can be found here https://support.overwolf.com/en/support/solutions/articles/9000176827-how-to-get-your-overwolf-logs

leaden lynx
#

hey i just downloaded a modpack from google chrome how do i get it into curse forge?

queen storm
leaden lynx
#

I didnt find the modpack?

queen storm
queen storm
#

Person needs to change it to release

#

!mc-installpack

red patioBOT
#
How to install modpacks with the search features in app.
  1. Open the grassMinecraft section of the app.
  2. Click the top search bar where it says Search for modpacks OR Click the Browse Modpacks Tab.
  3. Find the Modpack you want to install and click install on it.
  4. Wait for CurseForge app to download and unpack all the required files.
  5. Once finished, click Play!
How to install modpacks from a Export. (Custom/Private/Site downloaded Modpack zip)
  1. Get CurseForge App if you don't have it, use !download for a link.
  2. Get the exported modpack from CurseForge or someone else, !mc-packshare explains how to make them.
  3. Open the grassMinecraft section of the app.
  4. Click CFadd Create Custom Profile
  5. Click the Import option.
  6. Find the file you just downloaded in step 2 and select it.
  7. CurseForge app will now attempt to download and unpack the modpack. If it fails, try steps 4-6 again.
  8. Once finished, click Play!
leaden lynx
queen storm
#

That is why it is not on the app

leaden lynx
#

Ok

#

Got you!

digital roost
#

ayo quick question

#

can i ask stuff about the reward program in this channel?

lyric crescent
#

yes

digital roost
#

ok so

#

i havent been getting points

#

is that because my projects are not popular enough or because of a curseforge problem?

queen storm
#

How many downloads do you have then?

digital roost
#

i have 130 total downloads

#

and 3 projects

queen storm
#

Yeah, you need a couple thousand more to even get near points

digital roost
#

damn

#

k thx just wanted to make sure

lime estuary
#

What are those points for?

lyric crescent
#

money

tulip night
#

Hello to everyone who can tell you what to do? I have already tried reinstalling

lyric crescent
#

?mc-installfix

red patioBOT
#
  1. Click on the Minecraft Tab on the Left side of the CurseForge App.
  2. Click CFmenu button next to the Create Custom Profile option.
  3. Click CFrepair Repair Installation option.
  4. Play game.

NOTE: You will not lose any modpacks or worlds, These are saved in the Instances folder. DO NOT TOUCH THIS FOLDER OR YOU WILL LOSE EVERYTHING

light reef
#

How do I put Optifabric Optifine In this fabric mod?

lyric crescent
#

either unlock the profile and add it like any other mod, or put it in the mods folder for the instance

tulip night
# red patio

he tells me that minecraft is working, although it is not

lyric crescent
#

restart your pc

opal raptor
#

Anytime I try to set up the minecraft mods folder, it tells me this, I have turned off onedrive sync, I think.

lyric crescent
#

?mc-path

red patioBOT
#

**Minecraft Files should NOT be installed inside the following locations
.minecraft folder.
OneDrive folders.
Desktop folder.
Drive roots I.E. Directly into the C:\ drive.
iCloud enabled folders.
or any other cloud saved folder.

If any of the above are in the path you need to change/move it by following the instructions below!**

If Minecraft is not installed in CurseForge App, start here.
  1. Click the cf in the top left.
  2. Select Minecraft from the list of games.
  3. Select the Standard option to Install to.
    OR
    3b. Select the Advanced option if you wish to change the folder location.
  4. Click Continue.
If Minecraft is installed in CurseForge App, follow these steps.
  1. Click the CFsettings in the bottom left.
  2. Select the Minecraft tab.
  3. Click Change.
  4. Make a folder in the root directory called CurseForge.
  5. Select the folder you just made.
    The text box should show something like the following:
    For Windows: C:\CurseForge
    For Mac: /Users/Shared/CurseForge
crystal mulch
#

I need help please

lyric crescent
#

!ticket-site

red patioBOT
#
:bug: Reporting via Website :bug:

Can't open the app or would rather use the website? You can do so here: https://support.curseforge.com/en/support/tickets/new

Fill out the form with accurate detailed information, "It doesn't work" isn't helpful! What exactly doesn't work and why doesn't it work should be easy to answer!

Make sure to upload your Overwolf logs with the Upload File option on the ticket, information on how to get these logs can be found here https://support.overwolf.com/en/support/solutions/articles/9000176827-how-to-get-your-overwolf-logs

tulip night
light reef
#

how do i Put optifine in FOrge modpack?

lyric crescent
#

?mc-optifine

red patioBOT
#
Optifine and Curseforge

To install Optifine with modpacks on Curseforge:
Right click the modpack icon, select Open Folder.
Put the Optifine.jar into the mods folder.
Now load the modpack normally.

We do not offer support for Optifine. If you have issues with Optifine, remove it. If you want further support try the discord found on their website.
https://www.optifine.net/home

lyric crescent
tulip night
#

still writing

lyric crescent
#

did you run the installfix before launching anything?

light reef
#

thx

crystal mulch
lyric crescent
#

make a ticket...

crystal mulch
#

that's what i'm doing but i can't give the file they need

lyric crescent
#

!getcf

red patioBOT
#
Looking to install the CurseForge app?
<:windows:798410728188936222> Windows

Minimum Requirements:

  • OS Version: 7, 8.1, 10
  • 64 bit Required.
  • 350MB storage space.
  • Microsoft .Net 4.8
  • Intel/AMD quad-core CPU
  • 8GB ram

Download: https://download.overwolf.com/install/Download?&PartnerId=4047

If you are having issues with the installer use the URL below to install Overwolf then go to the app store to download CurseForge.
https://content.overwolf.com/downloads/setup/latest/regular.html



<:mac:798410654418862130> Mac

Minimum Requirements:

  • OS Version 10.14 or newer.
  • 64 bit Required.

Download: https://curseforge.overwolf.com/downloads/curseforge-latest.dmg



:penguin: Linux

Minimum Requirements:
Yes.

Download: :person_shrugging:

lyric crescent
#

try the overwolf installer here

crystal mulch
#

okj thx

#

i still can't open the support section

crystal mulch
tulip night
lyric crescent
#

and explain what you've done

crystal mulch
#

ok

lyric crescent
#

send the log, dont paste it here

weak parcel
#

ok

lyric crescent
#

you need a mod to extend the id range, like jeid

weak parcel
#

ok

lyric crescent
#

if you can that would be unrelated to curseforge

sweet trellis
#

Hi Guys

#

Question, I have beenplaying the v26 till now. If i udpate it till v28 will my world dissapear

#

Minecraft ( Mod Better minecraft)

devout fossil
#

hi i have a problem with my curseforge it will not started my add on libary

#

i will showing you what i mean

lyric crescent
lyric crescent
red patioBOT
#
:bug: Reporting via Website :bug:

Can't open the app or would rather use the website? You can do so here: https://support.curseforge.com/en/support/tickets/new

Fill out the form with accurate detailed information, "It doesn't work" isn't helpful! What exactly doesn't work and why doesn't it work should be easy to answer!

Make sure to upload your Overwolf logs with the Upload File option on the ticket, information on how to get these logs can be found here https://support.overwolf.com/en/support/solutions/articles/9000176827-how-to-get-your-overwolf-logs

devout fossil
#

thx for the fast help i look the page and read it ^^

digital roost
#

i need help i instal curseforge and select game program wants me select folder i selec it and program is write an invalid foulder what should I do

#

please ?

lyric crescent
#

screenshot

digital roost
lyric crescent
#

?mc-path

red patioBOT
#

**Minecraft Files should NOT be installed inside the following locations
.minecraft folder.
OneDrive folders.
Desktop folder.
Drive roots I.E. Directly into the C:\ drive.
iCloud enabled folders.
or any other cloud saved folder.

If any of the above are in the path you need to change/move it by following the instructions below!**

If Minecraft is not installed in CurseForge App, start here.
  1. Click the cf in the top left.
  2. Select Minecraft from the list of games.
  3. Select the Standard option to Install to.
    OR
    3b. Select the Advanced option if you wish to change the folder location.
  4. Click Continue.
If Minecraft is installed in CurseForge App, follow these steps.
  1. Click the CFsettings in the bottom left.
  2. Select the Minecraft tab.
  3. Click Change.
  4. Make a folder in the root directory called CurseForge.
  5. Select the folder you just made.
    The text box should show something like the following:
    For Windows: C:\CurseForge
    For Mac: /Users/Shared/CurseForge
hearty pendant
#

is gitlab supported too? can i just put gitlab URL into "Other"?

#

and if so will it still auto-build each new pushed tag as a new file?

#

or is that feature available in curseforge repo only?

mint stratus
#

hey im back and im still havin trouble with my download

mortal temple
#

i am not able todonwloed

#

anything

brazen creek
#

help pls

dapper loom
#

for the (looking for) channel in this discord server, am i allowed to say like looking for people to join my modded server?

lyric crescent
dapper loom
cursive wasp
#

Just out of curiosity, is there a way to change the image used for modpacks?

candid estuary
#

can someone help me pls

#

this keeps happening when i try to launch a modpakc, ive tried with multiple packs

#

so its not the specific one

viral briar
#

!mc-installfix

red patioBOT
#
  1. Click on the Minecraft Tab on the Left side of the CurseForge App.
  2. Click CFmenu button next to the Create Custom Profile option.
  3. Click CFrepair Repair Installation option.
  4. Play game.

NOTE: You will not lose any modpacks or worlds, These are saved in the Instances folder. DO NOT TOUCH THIS FOLDER OR YOU WILL LOSE EVERYTHING

viral briar
#

!notcf

red patioBOT
#

The question you are asking about isn't related to CurseForge. Please use the appropriate game rooms by getting the role from #786424115535544350 or use #👽︱game-support for help.

This room is only for CurseForge Owned & Maintained features/services.

mint stratus
#

so anyone know how to let curse or overwolf threw a firewall cuz it just keeps giving me this msg

idle badger
#

you only have one bar of internet in this picture

mint stratus
#

lol

candid estuary
#

tried it and it looked like it was gonna work but then didn't work

#

i got the same error messgae

#

it loaded all the way instad of crashing immedietly

lyric crescent
#

?mc-log

red patioBOT
#
Where to find the log on the CurseForge Client.

Right-click the modpack profile icon OR click the CFmenu button in the modpack profile.
Click CFfolderOpen Folder.
Open the logs folder.
Find the file called latest.log and drag it into discord.

lyric crescent
# mint stratus

problem is your internet connection, nothing we can do about that

candid estuary
mint stratus
#

ive downloaded it on my laptop tho

viral briar
# candid estuary

As it was all your modpacks that is why I first suggested the installfix but logs should tell us more what is going on

mint stratus
#

and i have been trying everyday this week

candid estuary
#

ohkay does it say why its not working

lyric crescent
#

use a wired connection

lyric crescent
vague ferry
#

Does anyone here know of the limits on CurseForge in terms of sponsorship / partnership advertisements on project pages? What is allowed and what is not? Pretty much 99% of the ads I see by users tend to be server hosting related

narrow minnow
red patioBOT
#
Looking to install the CurseForge app?
<:windows:798410728188936222> Windows

Minimum Requirements:

  • OS Version: 7, 8.1, 10
  • 64 bit Required.
  • 350MB storage space.
  • Microsoft .Net 4.8
  • Intel/AMD quad-core CPU
  • 8GB ram

Download: https://download.overwolf.com/install/Download?&PartnerId=4047

If you are having issues with the installer use the URL below to install Overwolf then go to the app store to download CurseForge.
https://content.overwolf.com/downloads/setup/latest/regular.html



<:mac:798410654418862130> Mac

Minimum Requirements:

  • OS Version 10.14 or newer.
  • 64 bit Required.

Download: https://curseforge.overwolf.com/downloads/curseforge-latest.dmg



:penguin: Linux

Minimum Requirements:
Yes.

Download: :person_shrugging:

narrow minnow
#

Use the regular.html link

lyric crescent
#

there are no rules yet, but the ads are very annoying and hopefully there will be rules soon

narrow minnow
#

I believe something is blocking your network to the servers (firewall, isp etc...)

mint stratus
#

yeah i pluged in my lan cabel and still the same msg

narrow minnow
#

Does this work?

#

Last time I've seen this issue - it was related to a software called Killer network

mint stratus
#

im downloading rn

candid estuary
#

@viral briar any idea?

tropic crypt
#

if I rename a profile, its directory name does not change. if I rename the directory manually, will it work?

narrow minnow
#

worst case, rename it back

mint stratus
#

i got it downloaded now what?

narrow minnow
#

Did you unzip and run overwolfsetup.exe?

mint stratus
#

i opened overwolf already

worldly vale
#

i keep getting the message The process can not access the file because it is used by another process

narrow minnow
#

great, do you see the AppStore?

mint stratus
#

yeah

narrow minnow
#

search for CurseForge

#

and install it

mint stratus
#

ok

narrow minnow
tropic crypt
mint stratus
#

omg it worked i love you wolfgang

narrow minnow
candid estuary
#

can i have help pls

narrow minnow
#

try to change your modding folder

worldly vale
candid estuary
#

no im not wht folder should i change it to

#

i can sharescreens if u want if itll make it easier

#

#and u can show me

tropic crypt
narrow minnow
worthy plank
#

why dos it say The request was aborted:Could not create SSL/TLS secure chanel

dreamy shoal
#

hi anyone know a way to play two on better mc

worthy plank
#

help me!!!!!!!!!!!!!!!!!!!!!!

arctic python
#

hey so i need the big help

#

so i made a new twitch account cus my old one got locked

#

and i still am working on my mod pack

#

and that account i can no longer use

#

but it has my project

#

so i need so like idk curse forge mods to help or somthing

#

cus i have the files but need to reupload them on this new account

#

but want to keep the same project name

#

SO help mean please

#

@ me if you think or know you can help

narrow minnow
narrow minnow
red patioBOT
#
Issue Reporting with Overwolf tickets!

Issues can be reported two ways!
Via the website, or in app. Instructions for both are below!

Make sure to include logs when reporting a problem!
Upload your Overwolf logs with the Upload File option on the ticket, information on how to get these logs can be found here https://support.overwolf.com/en/support/solutions/articles/9000176827-how-to-get-your-overwolf-logs

:bug: Reporting via Website :bug:

Can't open the app or would rather use the website? You can do so here: https://support.curseforge.com/en/support/tickets/new

Fill out the form with accurate detailed information, "It doesn't work" isn't helpful! What exactly doesn't work and why doesn't it work should be easy to answer!

:question: Ticket Status :question:

Tickets you have made can be looked at, replied to and closed if you make/login to an account. If you submit a ticket with a specific Email make sure to use that when you make your account so you can see your past tickets!
https://support.curseforge.com/en/support/tickets
Otherwise you will only get email replies at the email you used to open the ticket.

:bug: Reporting via the CurseForge App :bug:
  1. Click the CFsupport icon in the bottom left.
  2. Select CFsupport_ticketOpen a Ticket.
  3. Fill out the form with accurate detailed information, "It doesn't work" isn't helpful! What exactly doesn't work and why doesn't it work should be easy to answer!!
  4. Upload your Overwolf logs with the Upload File section. (see the top of this message for details)
  5. Submit!
arctic python
# narrow minnow ?ticket

this is not a game problem or a curse forge problem its a me problem that i can't fix in anyway without help

narrow minnow
#

You are asking to move your project to your new twitch/curseforge account, right?

arctic python
#

yes

#

if possible

#

cus

worthy plank
#

hey wolf gang

arctic python
#

i was just going to make a new project with the same name

#

and reupload my files

narrow minnow
#

So open a ticket for that

arctic python
#

but then i was like then it could get reported

narrow minnow
#

and they'll try to validate you are the rightful owner etc...

arctic python
#

ok

#

i have some prof but mostly just the game files and like pics of the old account

#

and also the one copy of the image thats the pic for the cover

#

also where do i go to do this

narrow minnow
#

?ticket

red patioBOT
#
Issue Reporting with Overwolf tickets!

Issues can be reported two ways!
Via the website, or in app. Instructions for both are below!

Make sure to include logs when reporting a problem!
Upload your Overwolf logs with the Upload File option on the ticket, information on how to get these logs can be found here https://support.overwolf.com/en/support/solutions/articles/9000176827-how-to-get-your-overwolf-logs

:bug: Reporting via Website :bug:

Can't open the app or would rather use the website? You can do so here: https://support.curseforge.com/en/support/tickets/new

Fill out the form with accurate detailed information, "It doesn't work" isn't helpful! What exactly doesn't work and why doesn't it work should be easy to answer!

:question: Ticket Status :question:

Tickets you have made can be looked at, replied to and closed if you make/login to an account. If you submit a ticket with a specific Email make sure to use that when you make your account so you can see your past tickets!
https://support.curseforge.com/en/support/tickets
Otherwise you will only get email replies at the email you used to open the ticket.

:bug: Reporting via the CurseForge App :bug:
  1. Click the CFsupport icon in the bottom left.
  2. Select CFsupport_ticketOpen a Ticket.
  3. Fill out the form with accurate detailed information, "It doesn't work" isn't helpful! What exactly doesn't work and why doesn't it work should be easy to answer!!
  4. Upload your Overwolf logs with the Upload File section. (see the top of this message for details)
  5. Submit!
arctic python
#

also how long will this take

#

cus me and my team where getting ready for an update

fleet bear
#

1-3 working days. Next working day is sunday.

arctic python
#

well thats ok ig

#

also the ticket came back and it did literately nothing for me

#

can someone at overwolf just hop in a call with me or some cr*p and let me show or say what i need help with

digital roost
#

i need some help
when i try to create a 1.7.10 profile curseforge crashes
any help??

fallen loom
digital roost
#

oh ok

sullen trellis
#

Hey guys whenever i launch a modpack it just ends up showing a grey screen any clues on why?

fleet bear
arctic python
cursive wasp
#

Can you share your own custom profiles with others?

fallen loom
red patioBOT
#
There are two ways to share a modpack you've made with others...
Export and Share - For Friends to Small Groups.
  1. Click the Icon for the modpack.
  2. Click the CFmenu button next to play.
  3. Click CFexportExport.
  4. Select the files that should be included.
  5. Send the zip to the people that want it! They can follow the instructions in !mc-installpack to install the pack!
Upload to Curseforge - For Public Release to Everyone.

This options will make your pack public to EVERYONE, it comes with extra requirements and will take some effort to set up.

  1. Go to here: https://www.curseforge.com/project/432/4471/create
  2. Fill out the information with a proper description of the pack. This should allow anyone to understand what the pack is.
  3. Click the Icon for the modpack in the CurseForge app.
  4. Click the CFmenu button next to play.
  5. Click CFexportExport.
  6. Select the files that should be included.
  7. Open your Project you made on the CurseForge site and Upload the file you just made.
  8. Wait for Moderation & Sync so it can show up in the client! (See !sync for limitations)
fleet bear
arctic python
#

Idk yet

fleet bear
#

Well did you read what it said....

digital roost
#

How do I get my curseforge 2fa token for cashing out my points

#

I'm using authy and I'm putting my twitch token in but it keeps saying "oops your 2fa token seems to be invalid please try again"

#

I'm using the same crap that let me login but its not working for cashing out. Unless my curseforge 2fa token is different then my twitch 2fa token? And if thats the case then how do I access my curseforge 2fa token

fleet bear
digital roost
#

Oh

#

I'll get back to u in a min

#

This is it

#

Thats reward program settings.
How do I get to reward settings? @fleet bear

fleet bear
#

How about a screenshot instead of a picture of a montor.

digital roost
#

Can't rn

#

Not sure where to set up my curseforge 2fa

fleet bear
#

That has nothing to do with taking a screenshot

digital roost
#

Let's move on all its showing is that update thing

#

No sign of 2fa anywhere

fleet bear
#

Well as I have no idea what your looking at exactly because the picture is awful.

digital roost
#

Thats all there is

fleet bear
#

Wheres the rest of the page?

digital roost
#

And I'd be happy to send a screenshot but my pc is having technical difficulties

long dawn
#

👍

#

nice.

digital roost
#

Get a life buddy

long dawn
#

lol he's running bluestacks to simulate discord

slim thunder
#

<@&524645667818307596>

digital roost
#

I'm trying to get shit done and this baboon is being an absolute sped

#

Its kinda funny

long dawn
#

he's blocked to me now

digital roost
#

Just blocked him

#

I just wanna get my points exchanged so I can goto sleep

long dawn
#

it seems he's not spamming expletives

#

so there's that

#

there we are

fleet bear
#

I cant get logged in to get the page url mobile login isnt working. It should have been in that page.

digital roost
#

Shoot

#

Hmm

#

Maybe click update?

fleet bear
#

Will need to wait till I'm at a pc or till I can get someone else to look.

digital roost
#

Alright thanks for the help so far. Do you know anyone else that can help?

strong shale
#

heyy, can someone dm me i need a little help installing valhelsia

hardy spoke
#

!mc-installpack just do this?

red patioBOT
#
How to install modpacks with the search features in app.
  1. Open the grassMinecraft section of the app.
  2. Click the top search bar where it says Search for modpacks OR Click the Browse Modpacks Tab.
  3. Find the Modpack you want to install and click install on it.
  4. Wait for CurseForge app to download and unpack all the required files.
  5. Once finished, click Play!
How to install modpacks from a Export. (Custom/Private/Site downloaded Modpack zip)
  1. Get CurseForge App if you don't have it, use !download for a link.
  2. Get the exported modpack from CurseForge or someone else, !mc-packshare explains how to make them.
  3. Open the grassMinecraft section of the app.
  4. Click CFadd Create Custom Profile
  5. Click the Import option.
  6. Find the file you just downloaded in step 2 and select it.
  7. CurseForge app will now attempt to download and unpack the modpack. If it fails, try steps 4-6 again.
  8. Once finished, click Play!
strong shale
#

i get an error

#

webclient exception something or other

#

and my internet speed is stable

hardy spoke
#

!webclient

red patioBOT
#

WebClient errors are from networking issues to your computer. You can try a few things to fix it:

  1. Restart the computer.
  2. Restart your router/modem.
  3. Try another internet source like a hotspot, wired connection or moving closer to the WiFi.
  4. Pause/Stop other things using the internet. (Streams, music, etc)
  5. If this still doesn't work, try again in an hour and hope your connection is stable.
hardy spoke
#

no idea then

strong shale
#

constantly get this even after i change internet sources and restart

fleet bear
digital roost
#

Alright

#

You could always try requesting desktop site maybe that would work?

fleet bear
#

It's the login that doesn't work cause it relies on twitch.

digital roost
#

Oh

fleet bear
#

Ah, discord search to the rescue

#

That should have the 2fa info

digital roost
#

Oh thanks so much

#

And now its actually showing my followers and total poste

#

Must be an error with the website

#

@fleet bear it wants me to verify with a generated 6 digit code

#

So I go on authy grab my twitch code but it doesn't work

fleet bear
#

You need to verify with the code you generate from the app you used to set up the 2fa

digital roost
#

Yep so authy

fleet bear
#

No... not the twitch code.

#

Twitch does nothing other than logging in.

#

Setting it up requires you to setup a CF entry in the 2fa app. Then you use that code to finish auth.

digital roost
#

It doesn't say enable two factors auth it just says manage two factor auth

#

And when I click that it sends me to a site asking for a 6 digit code

#

And on authy I only have twitch accounts

fleet bear
#

Picture of what it takes you to

digital roost
#

And the only stuff I have on authy is twitch and those don't work

fleet bear
#

Start over, you either skipped a step or messed something up.

digital roost
#

Start over from where?

fleet bear
#

Go back to the page I linked where it gives you the option to setup 2fa

digital roost
#

Ok i did that

fleet bear
#

Then click manage

digital roost
#

Thats the only button and it always takes me to that phone thing

fleet bear
#

Then you already did this?

digital roost
#

I set up twitch 2fa

#

Which doesn't work with the store I guess

fleet bear
#

No.

#

You had to have set up curseforge 2fa already if its asking for a code to make changes

digital roost
#

Well fuck

#

How do I get my curseforge 2fa token then?

fleet bear
#

Contact support.

#

Get it reset or find the system you used to set it up.

#

!ticket

red patioBOT
#
Issue Reporting with Overwolf tickets!

Issues can be reported two ways!
Via the website, or in app. Instructions for both are below!

Make sure to include logs when reporting a problem!
Upload your Overwolf logs with the Upload File option on the ticket, information on how to get these logs can be found here https://support.overwolf.com/en/support/solutions/articles/9000176827-how-to-get-your-overwolf-logs

:bug: Reporting via Website :bug:

Can't open the app or would rather use the website? You can do so here: https://support.curseforge.com/en/support/tickets/new

Fill out the form with accurate detailed information, "It doesn't work" isn't helpful! What exactly doesn't work and why doesn't it work should be easy to answer!

:question: Ticket Status :question:

Tickets you have made can be looked at, replied to and closed if you make/login to an account. If you submit a ticket with a specific Email make sure to use that when you make your account so you can see your past tickets!
https://support.curseforge.com/en/support/tickets
Otherwise you will only get email replies at the email you used to open the ticket.

:bug: Reporting via the CurseForge App :bug:
  1. Click the CFsupport icon in the bottom left.
  2. Select CFsupport_ticketOpen a Ticket.
  3. Fill out the form with accurate detailed information, "It doesn't work" isn't helpful! What exactly doesn't work and why doesn't it work should be easy to answer!!
  4. Upload your Overwolf logs with the Upload File section. (see the top of this message for details)
  5. Submit!
digital roost
#

Alright

#

U know what

#

Its like 100$ I'm gonna try again another day

#

My energy for this is used up

gloomy rampart
#

hey can someone explain me how to use the curseforge app to mod minecraft? Because I saw that you need a twitch launcher or sommething like that

fleet bear
#

Sure you didn't use google auth?

digital roost
#

Nah just authy

fleet bear
#

!mc-installmods

red patioBOT
#
How to install mods in CurseForge App.
  1. Click + Create Custom Profile
  2. Name it, select the required Minecraft version, select the Forge version (usually the highest number), click Create.
  3. Click the profile icon.
  4. Click Add New Content
  5. Search and install the desired mods.
  6. Start the game!
How to install mods not on CurseForge.
  1. Right click the profile picture or Open the profile and click the CFmenu Icon next to the play button.
  2. Click CFfolderOpen Folder.
  3. Drag the mod(s) into the mods folder. (Note: Some mods will require others, to run. Make sure to read the instructions for the mod!)
  4. Start the game!
tiny parrot
#

how do i use run ksp through the curse forge app

gloomy rampart
#

it says that i haven't installed minecraft

weak spoke
#

Hello, I have a problem what can I do to fix it ?

dense current
#

!status

red patioBOT
#

It is 02:38AM on Friday for CurseForge my dudes.

Project Moderation Time

Project/File moderation is done on;
Sunday, Monday, Tuesday, Wednesday, Thursday: 10AM - 6PM GMT+2
Friday, Saturday: No Moderation!

This process is First in, First out. Thus files submitted late in the work day may not be checked until the next work day.

New Projects or uploads requiring manual approval: 1-3 Working Days
Updates to approved projects not needing manual approval: 1 Hour

File sync to the Curseforge app may take up to 24 hours after approval.

viral briar
red patioBOT
#

**Minecraft Files should NOT be installed inside the following locations
.minecraft folder.
OneDrive folders.
Desktop folder.
Drive roots I.E. Directly into the C:\ drive.
iCloud enabled folders.
or any other cloud saved folder.

If any of the above are in the path you need to change/move it by following the instructions below!**

If Minecraft is not installed in CurseForge App, start here.
  1. Click the cf in the top left.
  2. Select Minecraft from the list of games.
  3. Select the Standard option to Install to.
    OR
    3b. Select the Advanced option if you wish to change the folder location.
  4. Click Continue.
If Minecraft is installed in CurseForge App, follow these steps.
  1. Click the CFsettings in the bottom left.
  2. Select the Minecraft tab.
  3. Click Change.
  4. Make a folder in the root directory called CurseForge.
  5. Select the folder you just made.
    The text box should show something like the following:
    For Windows: C:\CurseForge
    For Mac: /Users/Shared/CurseForge
autumn plaza
#

i added the optifine mod to 1.17.1 forge and it dosent work? ive extracted the optifine as well.

signal ridge
#

!mc-optifine

red patioBOT
#
Optifine and Curseforge

To install Optifine with modpacks on Curseforge:
Right click the modpack icon, select Open Folder.
Put the Optifine.jar into the mods folder.
Now load the modpack normally.

We do not offer support for Optifine. If you have issues with Optifine, remove it. If you want further support try the discord found on their website.
https://www.optifine.net/home

autumn plaza
#

where is the modpack icon

signal ridge
#

Are you using the curseforge app?

autumn plaza
#

no i just got the optifine off the the optifine website

signal ridge
#

Meant what Client are you using Curseforge or Vanilla?

autumn plaza
#

just minecraft launchers

#

*laucnher

#

so vanilla

#

i think

frail elm
#

yo how do you make a server

signal ridge
signal ridge
red patioBOT
#

The question you are asking about isn't related to CurseForge. Please use the appropriate game rooms by getting the role from #786424115535544350 or use #👽︱game-support for help.

This room is only for CurseForge Owned & Maintained features/services.

restive geyser
#

Hello, I am experiencing crashes when I try joining my Better Minecraft server, here is the error message.

#

If anyone knows how I can fix this error, please tell me.
I tried:
Re-installing the mod pack (Client) and (Server)
Restarting my computer
Versions are the same, so no problem with that.
Hitting my computer. (didn't end well)

lost perch
#

what do if a mod does not show up on curseforge when makeing a modpack

red patioBOT
#

The question you are asking about isn't related to CurseForge. Please use the appropriate game rooms by getting the role from #786424115535544350 or use #👽︱game-support for help.

This room is only for CurseForge Owned & Maintained features/services.

signal ridge
restive geyser
#

Sorry about that, thought this should be the right channel

#

Yes

#

I've tried moving the mods & configs manually to the custom profile too, same error message

signal ridge
signal ridge
#

Pick a channel and stick with it

crude nexus
#

Getting this over and over. MacOS 12, beta 3.

cursive atlas
#

hi

gusty stump
#

quick question why cant a friend of mine join me in a LAN world on most modpacks?

tepid reef
#

i keep getting a crash report for all the mods 6

signal ridge
signal ridge
red patioBOT
#
Where to find the log on the CurseForge Client.

Right-click the modpack profile icon OR click the CFmenu button in the modpack profile.
Click CFfolderOpen Folder.
Open the logs folder.
Find the file called latest.log and drag it into discord.

tepid reef
#

i think i done it right

outer spindle
#

what is a Bedrock "Resrouce" Pack?

signal ridge
# tepid reef

Does it crash and close on its own OR Does it freeze and a window pops up and you close it?

tepid reef
signal ridge
tepid reef
#

im gonna try to load into a different world

signal ridge
tepid reef
signal ridge
tepid reef
signal ridge
tepid reef
signal ridge
#

!mc-ram

red patioBOT
#
How to set Global Minecraft RAM value.
  1. Click the CFsettings icon in the bottom left to open settings.
  2. Click the Minecraft tab.
  3. Scroll down.
  4. Slide slider to recommended ram range as seen below.
tepid reef
#

okay it was at 4600MB so i moved it up to 7168MB and ill try it like that

signal ridge
#

ok

tepid reef
#

should i restart modpack after fixing ram? probably right

signal ridge
#

yes

tepid reef
#

kinda figured

#

unsure if its gonna work its just on the screen

#

man i cant even screenshot lmao

ashen phoenix
#

Just downloaded the Better MineCraft V29 Modpack. Everytime I try to launch the game after the dowload, the game just crashes and said there is an unkown error. Any thoughts?

tepid reef
ashen phoenix
#

Exactly

tepid reef
#

this is what i keep getting after upping my ram

#

this is for all the mods 6

tepid reef
#

still doing it that stinks

#

well it loaded up a different world but not the main one

ashen phoenix
#

progress at least, I can't get to the home screen to even choose a world

#

tried adjusting RAM, restarting...still nothing

tepid reef
#

is there a way to load up a backup?

rigid basin
tepid reef
#

thats how i feel right now

noble karma
#

Hey I need some help fellas.

#

how do I fix this?

tepid reef
#

That’s new

noble karma
#

oh no

tepid reef
#

Or I haven’t seen it

fallen loom
noble karma
#

obviously i can see that it says the java version is not up to date, but how do I fix?

fallen loom
#

Oh right, you're launching with Curse, aren't you?

noble karma
#

yeah

fallen loom
#

This is Minecraft 1.17, right?

noble karma
#

1.17.1

fallen loom
#

What version of Fabric?

noble karma
#

0.11.6

fallen loom
#

This should be being handled by the regular Minecraft Launcher...

noble karma
#

I also just blue screened...

#

Fml

fallen loom
#

I didn't get that error in my test

#

?mc-log when you get back please

red patioBOT
#
Where to find the log on the CurseForge Client.

Right-click the modpack profile icon OR click the CFmenu button in the modpack profile.
Click CFfolderOpen Folder.
Open the logs folder.
Find the file called latest.log and drag it into discord.

noble karma
#

It just launched

#

I have no idea

tepid reef
#

im still getting crash exit code 0

noble karma
#

Thanks guys

fallen loom
#

Just noticed where we are

#

!notcf

red patioBOT
#

The question you are asking about isn't related to CurseForge. Please use the appropriate game rooms by getting the role from #786424115535544350 or use #👽︱game-support for help.

This room is only for CurseForge Owned & Maintained features/services.

fallen loom
vapid zealot
#

i am trying to connect my ksp account to curseforge but i have it on steam, and it wont scan steam for ksp

vague tundra
#

wth is this? I'm getting like a few hundred every second.

#

Like literally, after not even 5 minutes, i have 30K of these

#

Well?

digital roost
#

does anyone know what is happening

#

i made abuckybarr mod folder

#

and

#

it inst letting me

#

launch

#

when i launch it say's error code 0

queen storm
#

!mc-logs

red patioBOT
#
Where to find the log on the CurseForge Client.

Right-click the modpack profile icon OR click the CFmenu button in the modpack profile.
Click CFfolderOpen Folder.
Open the logs folder.
Find the file called latest.log and drag it into discord.

digital roost
#

!mc-ram

red patioBOT
#
How to set Global Minecraft RAM value.
  1. Click the CFsettings icon in the bottom left to open settings.
  2. Click the Minecraft tab.
  3. Scroll down.
  4. Slide slider to recommended ram range as seen below.
queen storm
#

Running random commands won't help.
Is that using curseforge?

digital roost
#

yes

digital roost
#

and also

#

the issue

#

with i cant open it

queen storm
#

"it"

#

You mean curseforge?

#

So you are using it without opening it?

digital roost
#

no i

#

can open curse forge

#

but when i open mc

#

it crashes

#

and says

#

error code 0

queen storm
#

That log, is that using curseforge or not?

digital roost
#

curse forge

#

included

queen storm
#

Which modloader is it using?

digital roost
#

u mean

queen storm
#

Forge or fabric

digital roost
#

forge or fabric?

#

frorge

queen storm
#

Can't see that in the log

digital roost
#

it happend agian

#

but

#

this

#

time it showed exit code 1

queen storm
#

Where are you getting that log from?

digital roost
#

roaming/minecraft/logs/lattest logs

queen storm
digital roost
#

oh

#

sorry

queen storm
#

As you posted the same one twice

digital roost
#

im

#

sorry

#

this one

queen storm
#

Patcher is kinda broken

digital roost
#

so

#

shouldi

#

delete

#

patcher

#

idont realy mind

#

cause iwas just recreating the buckybarr mod folder

vague tundra
#

What The Heck Is This?

queen storm
#

Try to say it in less messages please.

queen storm
digital roost
queen storm
digital roost
vague tundra
#

Nope.
Sodium.
Had the exact same mods installed as always.
And this screenshot was from a Pure Unmodified Vanilla launch.
Half of it kept on going after the game unloaded. AND IT EVEN (somehow) Crashed Discord cause of CPU

vague tundra
#

Never have one on MC

queen storm
#

!mc-logs

red patioBOT
#
Where to find the log on the CurseForge Client.

Right-click the modpack profile icon OR click the CFmenu button in the modpack profile.
Click CFfolderOpen Folder.
Open the logs folder.
Find the file called latest.log and drag it into discord.

vague tundra
#

It's over 8 MBs

#

And my nitro expired

queen storm
#

Then find a different way to get it here

finite juniper
#

Does anyone knows how to solve this problem?

queen storm
red patioBOT
#

**Minecraft Files should NOT be installed inside the following locations
.minecraft folder.
OneDrive folders.
Desktop folder.
Drive roots I.E. Directly into the C:\ drive.
iCloud enabled folders.
or any other cloud saved folder.

If any of the above are in the path you need to change/move it by following the instructions below!**

If Minecraft is not installed in CurseForge App, start here.
  1. Click the cf in the top left.
  2. Select Minecraft from the list of games.
  3. Select the Standard option to Install to.
    OR
    3b. Select the Advanced option if you wish to change the folder location.
  4. Click Continue.
If Minecraft is installed in CurseForge App, follow these steps.
  1. Click the CFsettings in the bottom left.
  2. Select the Minecraft tab.
  3. Click Change.
  4. Make a folder in the root directory called CurseForge.
  5. Select the folder you just made.
    The text box should show something like the following:
    For Windows: C:\CurseForge
    For Mac: /Users/Shared/CurseForge
queen storm
finite juniper
#

ohh it was community?

#

sorry

vague tundra
digital roost
#

like drag the file into discord

queen storm
vague tundra
digital roost
queen storm
digital roost
#

it worked now it isnt crashing

vague tundra
#

[02:02:52] [Render thread/INFO]: OpenGL debug message, id=1280, source=API, type=ERROR, severity=HIGH, message=Error has been generated. GL error GL_INVALID_ENUM in (null): (ID: 173538523) Generic error
Absolutely everywhere.

queen storm
queen storm
digital roost
queen storm
#

Welcome to modded, can try the ram

digital roost
#

Habe heute auf Time das Item Chemilabor von Techguns im Singleplayer Modus anzuwenden versucht. Es endete mit dem sofortigen Absturz. Daraufhin musst ich Java neu installieren, weil sich das Spiel nicht mehr aufrufen lies. Als ich das Spiel öffnen konnte, stellte ich fest, dass sich der Berg auf dem ich ein ziemlich großes Gebäude errichtet hatte, samt allem was darauf gebaut war, verflüssigt hatte. Erde und Lava u.a. war flüssig und wabberte nur so ineinander. Das Item sollte entfernt werden.

jagged marsh
#

Hey when will curseforge update to support forge for mc 1.17.1?

viral briar
golden compass
#

i cant install some mods for kerbal space pgoram correctly

#

the program just spits out I/O error occured

#

looks like this

#

no matter what i change i always get i/o error

queen storm
#

Probably because it is trying to write in program files, start curseforge as admin

golden compass
#

ok

#

nope

#

still crapped out

#

it looks like it tries to install

#

it gets to like

#

unzipping

queen storm
#

Close overwolf in total, then start it again

golden compass
#

i did

queen storm
#

And less messages,

#

Overwolf does not start that fast

golden compass
#

i have a pretty fast computer

vapid zealot
golden compass
#

i have ksp on steam yes

#

the addons not so much