#👽︱game-support
1 messages · Page 195 of 1
maybe someone else knows what's going on hah. first place to check is the config files for mods.
i think its the bottem one
oaky
done think you
im trying to clean this up
^this is probably because of my friends enderman spawner and the fact i was exploring the end
if guys have a faster way to delete the jutebox ones lmk otherwise im deleting 1 by one lol
Can you send the nbt file? I may be able to do smthn
What if you disable that high res texture pack?
ah i guess i could go down on textures for the sphax huh
never even occured to me
how do i send the file
drag and drop into discord
yeah
Hi, is there a way for the native M1 mac Lunar client to play nice with forge mods? I have server setup and my kid is trying to connect with Lunar but I have bunch of better minecraft fabric mods installed so it's erroring out.
No, most of the time mods need to be installed both server side and client side
Right, I have the server side going fine, its the Lunar client I'm not sure what to do with... it sure runs butter smooth compared the emulated client though
Afaik lunar client cannot run mods. Use the vanilla launcher with curseforge
non native?
how can i play minecraft without it being in demo mode?
log in with an account that owns minecraft
Think I did it (you will need to rename the file)
Not compiled for M1 mac, dose not seem to use it's GPU... poor frame rate etc.
i did but it still launches in demo mode
i mean, m1 mac has issues in general. that isnt a fault with the minecraft client. and i dont see how lunar has anything to do with fixing it.
?mc-login
Chief any news
Did you click 'go back' and choose the correct account type?
Yes. See the file i uploaded above
so keep the old file just in case?
Definitely
time to test it
well i wont know if somethings wrong ye
went from 256 to 128 on the texture pack did fix the fps
all current backpacks that i have acess to still have their storage
turned of mobs spawning with backpacks
What did u do with the file if i may ask
like how did u clear it up
A lot of find and replace, but after converting it to snbt (like json) with a vscode extension, doing the replacing then using the minecraft server jar to convert it back to .dat (cause it can do that for some reaoson)
Lol, basically i converted it to text, then searched for all instances of each music disc and replaced them with blank, then converted from text to nbt
oh
that seems simpler
lol
last question for the day
"Can't keep up! Is the server overloaded? Running 2210ms or 44 ticks behind" is this natural to happen every now and then
i havent seen it effect the server yet
Yeah, that is expected occasionly
If it gets too often or the number of ticks increase to large amounts then its a laggy server
Happy to help!
have a good day
Tried to remove BetterAnimalsplus, but I got the same result. Is there no other way than to start over again?
Not that I can see
The game crashed whilst rendering overlay
Error: net.minecraftforge.fml.config.ConfigFileTypeHandler$ConfigLoadingException: Failed loading config file legendarytooltips-common.toml of type COMMON for modid legendarytooltips
Exit Code: -1
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
i keep getting these errors
delete the file legendarytooltips-common.toml from the config folder
wheres tyhe config folder
Right click the instance icon in Curseforge then select
Open Folder, there will be a config folder in there
i cant load schematics on my server but world edit works
hey chief quick question can i pm you to ask you a question
Sure?
hello, i was just wondering what mod conflicts with OptiFine.
!mc-optifine
If you have issues with Optifine, remove it. If you want further support try the discord found on their website.
https://www.optifine.net/home
Installing Optifine with modpacks on Curseforge:
- Right click the modpack icon, select
Open Folder. - Put the
Optifine.jarinto themodsfolder. - Now start the modpack.
How can i fix this?
I checkted the logs and this is what they said
A easy to use Paste site for Minecraft Server logs.
PLease help, I have had a crash, it was working so well, then this, as I was trying to upload a skin to customnpcs
anyone know the fastest powercable in atm7
That error seems to be the abyss complaining about config files, however cause its a snippet and not the full log I can't tell
Hmmm
how can i show u the full log
Little lightz: that first one is a mod that goes by the name mpm by noppes causing it, specificially the texture selector.
I suspect its incompatible with optifine.
Also please stop spamming your log
How can i show you my log file?
the full one
I got your message the first time, no need to ping me to ask again
I thought you were talking to me about the full log file
Sorry
Twitxh: share this
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
Client has mods that are missing on server: [betterendforge, appleskin]
betterendforge is already in there
so is appleskin
Are they the same version as the client?
How do I play the curseforge modpacks that I have installed on my computer if I don't currently have internet connection
*want
want
sounds like you should contact the modpack author then
Install forge/fabric manually and copy the mods to it
Hi, how can I get my npc model from custom npcs to work? I tried deleteing the optifine, but its not working
I might as well restart the entire modpack
I want my custom skin on it from skindex
and make sure i dont put any clientside mods onto the server
Just make that your skin using the mc launcher?
Idk what you mean?
you are 100% certain that the server is being run as Forge and not as vanilla minecraft?
There's no easier way? I'm in the curse forge folder, I want to instances and found all the mod packs I have, there's not an EXE buried somewhere in here?
Its being sent to run as forge
and not vanilla
Is the only way to play offline to manually add the mods and forge?
Yup
Custom modpack client-server mismatch
Is that for the mod? Custom NPCS? I need to change the skin on the npc ingame on minecraft
So go ask that mod author
I will try
is sodium and optifine compatible?
No
can someone in this discord tell me how to download shaders i have a file but idk what to do now
ty
it's a gaming pc
it dose have gud grapichs
i run tf2 on 50 fps
opt?
i have a shader called BSL
im minecraft?
And are you trying to install it in a modpack or vanilla
shader
this file
of minecraft or shader
im a dumbass
i know that
ok google is open
ok
done
k
um hold on
OptiFine HD U H4 this?
im downloading this?
ok
i have to instal fierplayer
ummmm how would i update the launcher?
!mc-updatemodloader ⤵️
You can update the mod loader within the same game version in the CurseForge app by following these steps!
- Click on the modpack profile you are working with.
- Click on the
button next to the play button. - Click on the
Profile Options button. - Select the mod loader version you want from the dropdown.
- Play!
If you need to update to a new game version, a new profile is required.
thanks!
ist 1.18.1
the guy
in the vid
the guy in the vid says 1 dot 18 dot 1
ah
ok back to lerninng to move around files
gtg take a shower and im half way done with it
ty
WHAT
DID I DO SOMTHIGN WONG
Java is what minecraft runs on, and is also what the optifine installer runs on (its sort of a like wheels for a car)
Minecraft has its own copy of java stored away that it uses, however the optifine installer can't use that, it needs java installed directly
You can download java from here: https://java.com
Just run the file you get to install it
what block do you need to get the nightwatch villager
@autumn agate @coarse nest ty
hello?
You might want to explain a bit more, like mod, modpack and version
hi i was wondering how to get the nightwatch villager
like what block do you need
this is in better minecraft mod btw
oof
According to a quick google search its a 'bag of spoils'
The other suggestion would be to install this mod to see what block it is: https://www.curseforge.com/minecraft/mc-mods/just-enough-professions-jep
man im ganna lose it
the server just dont even start anymore
I need help
A easy to use Paste site for Minecraft Server logs.
this is what it says
and for the offical log thingy
i have a custom modpack
1.16.5
Its really not liking your world file
From similar crashes im pretty sure its an advanced rocketry issue, the mods very unstable rn
alri ill let u kjnow if it works
omg
it
works
FINNALYYYYYYYYYYY
OH MY GOD THAT TOOK ALL DAY
TY!!
Let's say I have a world that generated with "A" Biome mod
If I add a new "B " Biome / Structure mod will world going to collapse or will it going to be fine?
New chunks might look weird
thanks!
Hello everyone! My minecraft launcher is saying that I can play demo but I have game pass with Xbox.. Can anyone help me fix this? 🙂
Xbox is for the bedrock version, modpacks use the java version
Yeah Ive been playing pixelmon for a few months now but today it says play demo instead of going into the game
Because you did not buy the java version of minecraft
But I've been using the java version for a while now
Show a screenshot of the vanilla launcher then with you logged in and having the java version selected
Vanilla launcher, and don't crop it.
this is the only launcher i use
Do you play vanilla minecraft?
no sir
Did you ever buy the java version of minecraft?
no, only went through the xbox game pass
I have honestly no idea if that should work for the java version.
Is that still active?
its been working all the way up until today
So, looks like it should be supported (I googled it)
Is that the account you have the game pass on?
Yes sir, both accounts are the same one and they havent been changed since I got the game 🙂
Who should I report it to?
!mc-installfix
- Click on the Minecraft Tab on the Left side of the CurseForge App.
- Click
button next to the Create Custom Profileoption. - Click
Repair Installationoption. - Play game.
NOTE: You will not lose any modpacks or worlds, These are saved in the Instances folder. DO NOT TOUCH THIS FOLDER OR YOU WILL LOSE EVERYTHING
I did all of that and it downloaded fine but carried on saying, "play demo"
Then you would need to verify if your game pass is still working, that would be mojang or microsoft
Yeah, It says my next payment for the game pass will be in Feb so I know that I still have the game pass
I have no idea then
No worries, thanks for your time
i need help again my server crashed o nstart up after updating a fair amount of mods 18 to be exact. here is the log
her eis the latest crash
Try remove performant
nope instant crash
Huh. Theres nothing in there to sayit crashed, it just stops
strange
Oh wait, can you share this file? crash-reports/crash-2022-01-10_11.20.17-fml.txt
Its mentioned in the middle of the log, not at the end for some odd reason
rftoolscontrol getting angry
so i should revert back to old version ?
yes McJtyLib got updated to
i mean if there is no soultion to rf tools crashing i can revert it back to the old update tho
Try revert just mcjtylib, otherwise do the whole lot
but wont that mess with the other rftools mods by reverting McJtyLib because it's it library
Possibly, although if it got an update before any of the others then maybe not
i will try
it definetly was rftools just reverted the old version and works fine i can live without a new version tho. thx anyway 😄
yes
oh mobends
most of the mods u have loaded with lchi witch is good but mobend loaded lche Errored but im not a expert u should whait for support 😄
didn't even know it was there
not a mod i wanted anyways
i'll try deleting it
it was that!
ty for the help :)
anytime
I'm getting a crash report now when i load into the server
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
i would like help as when i load into a minecraft world my mods dont work im on 1.18 and i have placed the pack into the active section
you need a modloader to install a modpack. im not sure what you did with it but it doesnt sound like that.
!getcf
Minimum Requirements:
- OS Version: 7 (64 bit), 8.1, 10, 11
- 64 bit Required.
- 350MB storage space.
- Microsoft .Net 4.8
- Intel/AMD quad-core CPU
- 8GB ram
Download: https://download.overwolf.com/install/Download?&PartnerId=4047
If you are having issues with the installer use the URL below to install Overwolf then go to the app store to download CurseForge.
https://content.overwolf.com/downloads/setup/latest/regular.html
Minimum Requirements:
- OS Version 10.14 or newer.
- 64 bit Required.
Download: https://curseforge.overwolf.com/downloads/curseforge-latest.dmg
Minimum Requirements:
Yes.
Download: :person_shrugging:
so do i go into forge through overwolf?
With CurseForge, you can create minecraft profiles (modpacks) and use Forge or Fabric as modloaders. Or play pre-made modpacks made by other people/entities.
where do i download a mod loader?
i have done this through a tutorial
Can someone help, I'm trying to download a modpack, but failed
So you press play there, then again on the minecraft launcher.
?owlogs Send these logs
I don't have a 7-Zip file
@last parcel
Can also right click the folder, and click "Send to compressed folder" or something like that.
Alright, now what?
Drag that zip in here.
Which one?
The one you just made
?mc-installfix (dont ping me #📛︱rules 5)
- Click on the Minecraft Tab on the Left side of the CurseForge App.
- Click
button next to the Create Custom Profileoption. - Click
Repair Installationoption. - Play game.
NOTE: You will not lose any modpacks or worlds, These are saved in the Instances folder. DO NOT TOUCH THIS FOLDER OR YOU WILL LOSE EVERYTHING
restart your computer, dont open any mc launcher, just press play on cf.
👍 brb then
idk still nothing
is there anything else i need to do in minecraft
like a secret setting or something?
you should not be doing anything other than press play
yeah i press play
?mc-installfix
- Click on the Minecraft Tab on the Left side of the CurseForge App.
- Click
button next to the Create Custom Profileoption. - Click
Repair Installationoption. - Play game.
NOTE: You will not lose any modpacks or worlds, These are saved in the Instances folder. DO NOT TOUCH THIS FOLDER OR YOU WILL LOSE EVERYTHING
still nothing
open folder on the instance, open the mods folder and screenshot the contents
in mc or in forge?
curseforge
not what i asked for
right click the instance, open folder
i want to see the actual folder that has mods in it, not the app
ok, now press play on curseforge and show the mc launcher
press play, then screenshot the main menu once loaded
So forge is loaded, but not the mods folder..
yes
it says its a resource pack in the game
but the resource pack folder in curse and files is empty
I think it was because of my internet. It’s gonna keep doing that to me if I try redownloadong it. Idk what to do now. I just want to play some mods
i told you to send logs
me? or nic?
something is not adding up here. you have 1.7.10 mods in that folder for a 1.18.1 profile
should i recreate the profile but in 1.7
if you are intending to run 1.7.10 then you need to be using a 1.7.10 profile
did you install those mods manually?
Yes
- Click
+ Create Custom Profile - Name it, select the required Minecraft version, select the Forge version (usually the highest number), click
Create. - Click the profile icon.
- Click
Add More Content - Search and install the desired mods.
- Start the game!
- Right click the profile picture or Open the profile and click the
Icon next to the play button. - Click

Open Folder. - Drag the mod(s) into the
modsfolder. (Note: Some mods will require others, to run. Make sure to read the instructions for the mod!) - Start the game!
for some reason the application won't recognise my copy of stardew valley for me to put mods on
!stardew ⤵️
Overwolf maintains a known list of issues here, some with solutions, others without.
https://support.curseforge.com/en/support/solutions/articles/9000196615-curseforge-known-issues
Scroll down, look at "Other games"
thanks yamza it works now
still having trouble
ive tried moving the game files under C:\Program Files\Stardew.Valley.v1.5.6
still says invalid or doesn't recognise
where did you buy stardew from
well you see
hm?
hey, when i try launch a mod from the minecraft curseforge things, i get an error, then when i click off this error, i get a second one
- Click on the Minecraft Tab on the Left side of the CurseForge App.
- Click
button next to the Create Custom Profileoption. - Click
Repair Installationoption. - Play game.
NOTE: You will not lose any modpacks or worlds, These are saved in the Instances folder. DO NOT TOUCH THIS FOLDER OR YOU WILL LOSE EVERYTHING
thanks whoever sent that
Don't thank me yet, do we even know if it fixed the problem? :P
im further than i got before, so in my case, im saying thats a win
i was scatching my head for so long, one click of a button fixed it all
i feel so stupid now lmfao
how to download WORLD EDIT 1.8.9 in vanilla luncher plssss
I know not related but I'm getting this error any idea why?
"Using fabric / mod that crashes: Age of Exile"
I didn't get a answer from their support
trying my luck on here
How long did you wait with their support?
mmorpg: Age of Exile 2.1.4
That looks the reason
I see that as I said but
Can't figure the wrong here
Caused by: org.spongepowered.asm.mixin.injection.throwables.InjectionError: Critical injection failure: Redirector on$getHealthGeneric(Lnet/minecraft/class_1657;Lnet/minecraft/class_1320;)D in mmorpg.mixins.json:InGameHudMixin failed injection check, (0/1) succeeded. Scanned 1 target(s). Using refmap Age-Of-Exile-1.16.5-refmap.json
Tried upgrading or downgrading it?
Tried it yeah
let'me downgrade one version again
yeah still same
I think there is compatibility issue but I'm using Age of Exile for a long time and only in this modpack it crashes
Maybe not people that can read those
has anyone els that problem: you have been playing on server, server lag becouse server could load map(internet), BUT when you try to reconnect it says time out?
Does anyone recognize any of these mods causing crashes for minecraft 1.18.1? I'm trying to play on a server but when I shift-hover my cursor over some items the game just crashes, most consistently glass and the planttech2 analyzer
posting crash report in a sec
According to this crash report you are using a mod thats for 1.16.5
Mod extrastorage requires minecraft 1.16.5 or above, and below 1.17.0 Currently, minecraft is 1.18.1
it says the mod's for 1.18 and the download button for it shows 1.16 in the download page
Well clearly the mod author has done smthn wrong, go report it to them
The mod file only shows as a download for 1.18 if the author says it is
as far as I'm concerned Extrastorage doesn't change shift-hovering behavior which is the weird part
Is that crash report the correct one?
So I'm on a modded mc server and every time I try to join on my pc, it loads up to "loading terrain" then immediately gives me a connection lost with no crash report or reason why. I am able to join on my laptop on the same network. What should I do?
Have you checked the servers log?
im not the owner so no
they say im logging into the world then immediatly logging out
Could be the computer for some odd reason has worse internet connection than the laptop
hhhhhhhhh
Does anyone else have problems with 1.18.1 modpacks? I keep getting an error about minecraft not being able to create a Java virtual machine, any help?
Clear your java arguments (
->
Minecraft)
Try add -XX:+IgnoreUnrecognizedVMOptions to it
i have a probleme with the luncher of curse forge. He tell me "forginig your library" and stop and write retry (i'm french lol srry for my english)
that fixed it! absolute legend, cheers
I'm struggling with a crash that occurs every time I try to play a custom profile. Could I get help with figuring out what is going on? I have the crash report, if that helps.
Yep, crash reports always help with crashes!
the mod storagenetwork is erroring, try remove it
does anyone know what this means or know what to do to help
remove aether 2?
idk it's just the mod that is erroring tho
helpmeh
I haven't been keeping up with the security issues lately, and was wondering: is it safe to run a modded singleplayer world in 1.16.5 as long as Forge is the latest version?
Singleplayer worlds have always been fine (except for mods that allow other users to chat to you).
For the exact versions for it to be safe in multiplayer see #📢︱news (#📢︱news message)
the game by xbox game pass PC is not working anymore?
I log in with my microsoft account but in curse it keeps showing "DEMO"
am i able to add biomes o plenty and a mod that changes vanilla biomes?
One message removed from a suspended account.
alr mb thanks for letting me know
hi my curseforge has minecraft mods i didnt install and i cant un install them
Like
I'm trying to install Forge 1.8.9 and it literally does nothing when I use the installer, no JAR file is added to the versions folder in .minecraft
it also doesn't show up in the launcher, I tried putting the universal JAR file in there but that didn't work
it causes the game to crash immediately
Is anyone here atm?
Probably
Please help me, I really need vanillafix to work-getting around 30fps on a high end rig, making my life hell lmao
Some help would be greatly appreciated :))
try rename the mod file to __vanillafix.jar
I've tried something similar and got nowhere, but I'll give it another shot
Alas, here we are once more
No idea what can be done to fix it otherwise, the errors not a particularly helpful one
Damn. Any ideas to help my game run better then? I've got a R5 3600 and a 6700xt, but get absolutely garbage frames.
I'm really at a loss for this, I feel like I've tried everything to no avail
i just want my game to run decently, consistently y'know?
Try play a more modern version of minecraft
Unfortunatley due to the server I'm on, I'm stuck in this version
Ahh, that sucks
Is there a way to get optifine in with my mods?
How do I make a modded server?
!mc-installserver
- Check if the modpack has a server pack, if it does: use that and skip below.
- Go to the Forge website http://files.minecraftforge.net/ and download the Installer for the forge version the pack is using.
- Run the installer and choose
Install server. Do not install to your desktop. Also do not install inside a OneDrive folder. - Run the server using the forge.jar. A file called
eula.txtwill be generated. Open it and changeeula=falsetoeula=true - From the Client; Copy the
modsfolder,configfolder, and any other folders needed for the pack to work into the server folder. If the modpack has a server pack, use this instead! - Run the server again.
- Port forward your machine if needed. (Google it)
Long version: https://pastebin.com/83DXfGTH
!mc-optifine ⤵️
If you have issues with Optifine, remove it. If you want further support try the discord found on their website.
https://www.optifine.net/home
Installing Optifine with modpacks on Curseforge:
- Right click the modpack icon, select
Open Folder. - Put the
Optifine.jarinto themodsfolder. - Now start the modpack.
Tried it, nothing sadly
Maybe got the wrong jar? I'm not sure
Is it the jar that comes from the versions folder?
The jar you put in the mods folder is the optifine installer jar
OptiFine_1.12.2_HD_U_G5?
yeah
I'll give that a shot
Game crashed. Never seen that before :/
can't have shit in detroit
exactly the same error as before
yep.
i'm in an endless loop of shit fps, finding a supposed fix, the fix crashes, back to square 1
how can i get such bad fps with such a good rig? openGL truly baffles the mind
iirc 1.12 modded really didn't like AMD cards
kept saying errors in chat and crashed
something doesnt like tetra items
ig im just gonna give up, i really dont know what i can do for half decent frames
Go minimal graphics settings, 4 render distance, no mipmap, vsync off, fast graphics
other than that not much I can think of
are you able to know what doesnt?
No. It will be something that messes with rendering, like optifine, magnesium or similar 'performance' mods
well thats what im cofnused about tetra in the base modpack, i added optifine but on the base pack it has worked
Optifine replaces some minecraft code files, which makes it incompatible with a lot of mods
what preformance mod do you reccomend to fix this?
None
Iris is a fabric mod
Best you can do is vanilla based resourcepack shaders, although they require fabulous graphics on which breaks the little tool icons on some tetra blocks.
https://github.com/bradleyq/mc_vanilla_shaders/releases/tag/v2.3
are those icons important, never used the tetra mode before?
If you have never played before they are, they explain which tools to use to open various blocks you find in their ruin structures
i can probaly find that thru a browser thanks for the help
So I downloaded a server pack and tried to open the launchserver and got a message that came up saying
C:\Users\Name\Desktop\RAD-Serverpack-1.49\RAD-Serverpack-1.49>java -Xms2048m -Xmx4096m -XX:PermSize=256m -jar forge-1.12.2-14.23.5.2859.jar nogui Unrecognized VM option 'PermSize=256m' Error: Could not create the Java Virtual Machine. Error: A fatal exception has occurred. Program will exit.
What minecraft version is the modpack, and what java version do you have installed?
Minecraft version 1.12.2 and I have the latest Java, 17
do I need to uninstall java and then reinstall 8?
No, you can have multiple installed but the default is always the most recently installed one
Its a lighter modloader for newer versions. It runs a lot better than forge and has quite a few good performance mods, however it doesn't have as many api's (built in helpful stuff) for modders and so modders have to do more of that themselves. It also leads to a tad more incompatibilities than forge.
okay I downloaded java 8 but I am still getting the same message box popping up for it
What message?
the one I posted earlier
Press
. Type cmd in and press enter. In the window that just opened, type java -version then press enter, screenshot the output of that and send it here
example *.bat file - file path at beginning and file name at end need to be edited for whatever is used
Sorry?
*.bat files are convinient ways to launch servers without needing to use command prompt directly
Yep
Less than 4gb is probably not a good idea, depending on the modpack and mc version
Install 64 bit java, not 32. (On the java website you need to go to 'all versions' and select the offline installer, no idea why 32 is the default)
Also Briar, do you think you could get the java path in your bat file to point to the default mc launchers built in java version? That way people shouldn't have to do much unless they changed the path and so should hopefully know what they are doing if they did
The dynamite makes me think so too
that old version? i might die a little inside
KILLER QUEEN
lol
installed the 64bit
It should now work
Oh yikes, crayfishes mods on that low amount of ram..
Still getting
`C:\Users\MoT\Desktop\RAD-Serverpack-1.49\RAD-Serverpack-1.49>java -Xms2048m -Xmx4096m -XX:PermSize=256m -jar forge-1.12.2-14.23.5.2859.jar nogui
Unrecognized VM option 'PermSize=256m'
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
C:\Users\MoT\Desktop\RAD-Serverpack-1.49\RAD-Serverpack-1.49>pause`
remove the permsize term
where/how do I remove it? from the SH file?
You also need to replace the "-jar" option with the direct path to the java 8 install.
???
The jar is for the jar it should run. If specifying a java version that goes instead of java (which shouldn't be needed cause java home is set to java 8)
#👽︱game-support message
like this but change the file name to *.sh
or use that .sh file in similar fashion (the one you have) on the line that starts with 'java'
It exploded.
how much ram total does your PC have
give it 4G and since you know where to find that JVM box - add
-XX:+UseG1GC
after the Xmx/Xms terms (if it isn't there already).
you can always press the reset button next to the box to revert to factory options
unless it's already there
staa platinum za warudo
it did not generate a crash report. but it loads in to the red loading screen pre loadings then when thats done it goes black and goes not responding
How long did you wait on it not responding?
5 mins
Remove optifine and try again, and wait up to 20 mins
did immersive portals fix their mod to work after 36.2.4 for 1.16.5?
thats looking just like the problem i think
Probably works with forge 36.2.20
last version. very encouraging
"Uhhh Idk yknow it probably works
"
The github release note says it does work, although this crash is still 3 versions ahead
eh i did just load a blank 36.2.23 world with it. could also just be optifine incompat
The 1.16 version of this mod currently only works with OptiFine G7. 🤔
Hmm try "repair profile" in profile options
same error
I asked yesterday but I want to ask again
any idea?
Its probably an incompatibility, specifically with another mod that messes with the health/hearts system
will I going to try every mod to find that or
Oh just found the mod "Health Overlay" and removed it thanks!
🤔 may as well try deleting/reinsalling the agricraft and infinitylib mods
i got dis. you need to update your version of botany pots beyond the latest release version (beta or alpha)
https://www.curseforge.com/minecraft/mc-mods/botany-pots/files/3347067
this version added what agricraft is looking for
Looks like a problem with Thermal / Blood Magic, try disabling one of them or both and see if that works for you
zappah
Caused by 0: java.lang.NoClassDefFoundError: net/darkhax/botanypots/api/events/PotGrowCropEvent$Pre
event was added by a newer version of botanypots 😉
Oh didn't notice you'd helped him
i guess the agricraft people gambled on darkhax making a more public friendly release version that included it - they lost that one lol
i wont optifine work?
Does it work without optifine
yeah
!mc-optifine
If you have issues with Optifine, remove it. If you want further support try the discord found on their website.
https://www.optifine.net/home
Installing Optifine with modpacks on Curseforge:
- Right click the modpack icon, select
Open Folder. - Put the
Optifine.jarinto themodsfolder. - Now start the modpack.
Hello! So, I've been trying to create a duplicate of Roguelike Adventures and Dungeons because the server host doesnt let me modify the Forge server if its in a pack (dumb, i know) and I'm having issues with it, namely i keep getting Exit Code 0
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
I know, I know, give me a second
Here's the relevant log, I'm going to comb through it too, but any insight would be immensely appreciated
have a look at the crash report if there is one
Yes.... I did....
Seems like theres a conflict with native Fancy Menu that doesnt exist within R.A.D.
it crashes only in server
i added divine rpg and advent of ascension and my game crahed down klnow why tho. this is log from my console
does removing those things fix it?
worked fine before yes divine and advent is 2 huge mods adding over 28 dimentsions and stuff
then report this to the devs of those mods
remove one and see? pretty easy to test
alrighty
i cant make a multiplayer game in minecraft with my gun mod
when i use the instructions the bot says it downloads one updater
what bot says anything about whatever oneupdater is?
idk what you are doing, but that is not what you get from that link
u press instaler right
yep
what did it download
one updater
Then you hit a wrong button
i mean, that is pretty obviously not what should be downloading. seems like you were told before you have a virus. might want to deal with that.
what how do i delete it
idk, not really an virus removal expert. i prefer to just take preventative measures and not click things without understanding what they are.
you can try this i guess 🤷♂️
https://www.malwarebytes.com/adwcleaner/
what is project-444043 and why is it popping into my modpack
click it
I did
what does it say it is
blockgametweaker.jar
it has no desc
it's a nonexistent mod in my modpack
you can't find it on the search
it got my project rejected
yea i can't. no clue on that
I'll just delete it
open your manifest and remove the line that has that number, then import and see what's missing
One message removed from a suspended account.
Mcwdoors just don't work here or something? They worked in singleplayer as far as I have seen.
i dont get what you are saying. this log is from single player?
This log is from when I started my server with the mod. When I tried out the mod in singleplayer, it did work.
this is not a server log
Just tried to start up my server again to get a new log. This is the latest log from the logs folder in my server.
why would there be optifine on a server
Must have put it in there by mistake.
Yea it looks like I made a mistake there. Thanks ;D.
So I got the launcher for Forge 1.18.1 but the actual game won't launch.
Yes I did everything correctly.
i dont see where you used curseforge at all here, this is a vanilla install. anyhow, remove optifine, then post a new log
...it's not a vanilla install. And I don't have OptiFine yet.
This is what I'm launching.
Hi guys, there is someone who can help me in some way
it says right at the top of the log..
optifine zip file etc 🤔
in some mods
If you say with what
Then no
...that's weird, why the hell did I have 1.17 OptiFine?
Whatever. Deleted that, trying again.
ok 2 second chat here
waits for issue to show up
Alright, deleted OptiFine and game still crashed. Let's see.
send the log, dont paste stuff
last time i saw a log like this the forge discord banned the person for not using a legit minecraft account
can I add a mod of my favorite to modecraft for minecraft? in Fabulously Optimized {modpack} can add falltree?
modpack
!mc-editpack
- Click on the picture of the modpack.
- Click the

Add More Contentbutton, IF this button is not there, see below before continuing. - Find the Mods, Resource Packs or Maps you wish to Install and click
Installon them. - Wait for all the required mods to be downloaded.
- Start the modpack.
- Click on the picture of the modpack.
- Click on the
button next to the Playbutton. - Click on

Profile Options. - Check the
Allow content management for this profileoption if you want to edit the content of the modpack, uncheck it to disable.
NOTE: The Allow content management for this profile option is what allows you to Delete, Disable, Update or Install any Mods, Resource Packs or Maps managed by CurseForge. It must be on to modify any of them! (Currently)
No idea why this would need a dm
!mc-editpack
- Click on the picture of the modpack.
- Click the

Add More Contentbutton, IF this button is not there, see below before continuing. - Find the Mods, Resource Packs or Maps you wish to Install and click
Installon them. - Wait for all the required mods to be downloaded.
- Start the modpack.
- Click on the picture of the modpack.
- Click on the
button next to the Playbutton. - Click on

Profile Options. - Check the
Allow content management for this profileoption if you want to edit the content of the modpack, uncheck it to disable.
NOTE: The Allow content management for this profile option is what allows you to Delete, Disable, Update or Install any Mods, Resource Packs or Maps managed by CurseForge. It must be on to modify any of them! (Currently)
...that's disconcerting. I've had my account for nearly 6 years.
If not longer.
thx so much
This didn't happen for 1.17.
@wild jewel I got stuck in step 2
You need the second block
I'm a beginner I don't know what "block" means
Chapter, bold header, part
and how I get it
Second part of the instructions I send
ok I'm waiting for you to send me the 2nd part
@minor bone This?
thank you very much and sorry for the inconvenience much easier than I thought
note 100
for support
Reading is an important part of doing this stuff.
Might also want to re-read #📛︱rules , broke number 5 so many times
could try using curseforge instead of installing forge to your vanilla files 🤷♂️
!getcf
Minimum Requirements:
- OS Version: 7 (64 bit), 8.1, 10, 11
- 64 bit Required.
- 350MB storage space.
- Microsoft .Net 4.8
- Intel/AMD quad-core CPU
- 8GB ram
Download: https://download.overwolf.com/install/Download?&PartnerId=4047
If you are having issues with the installer use the URL below to install Overwolf then go to the app store to download CurseForge.
https://content.overwolf.com/downloads/setup/latest/regular.html
Minimum Requirements:
- OS Version 10.14 or newer.
- 64 bit Required.
Download: https://curseforge.overwolf.com/downloads/curseforge-latest.dmg
Minimum Requirements:
Yes.
Download: :person_shrugging:
hello, me and my friends are playing my modpack (1.12.2) and we found out that we cannot set our spawn unless we actually sleep through the night, does anyone know if theres a mod that does that?
getting an instant crash on launch
Electrodynamics is trying to add lakes features? 🤔
🤔
So, I'm trying to stream Sbeev's industrial revolution minecraft modpack to twitch through curseforge using twitch studio, but when I try to play the game, I look at the stream and it's frozen on the main title screen. I've logged into my twitch account through the curseforge website, and just hit play through curseforge, so I don't know what's going on. Any help?
CF is a launcher for the game. Shouldn't you be trying to stream the game?
I don't know twitch's UI
I know, I launch the game through curseforge then stream it through twitch studio
is that what I'm doing wrong? Should I be launching through twitch or something?
Try "repair installation" Walpar
Can you not simply select a window/application to steam?
what do you mean, "select a window to steam"?
alright
Sounds like the app is pretty basic for user simplicity then if that doesn't sound familiar. I'm used to less handholding ways like OBS studio.
I've tried using OBS studio, and especially for minecraft, it was just a bit too complicated for me. Is there any way to fix the problem with what I have? Or do I need to get something like OBS?
I'm guessing you can, just not with my knowledge :) read over the options of what you can point the stream to, maybe someone else knows
where do I find those options?
after install fix
The crash report maybe have more useful info
https://www.curseforge.com/minecraft/mc-mods/forbidden-arcanus
Got to love project pages with zero direct text on the main page as to what the mod does.
Open issues exist for the same erroring
uhh whats gonna happen then
Load a blank profile with just forbidden arcanus > if it runs then it's a conflict with some other mod in the pile
appears its a conflict

Try without optifine
ok i will
And running in OneDrive might cause problems as well, it is not recommended to have the installation there.
its a old onedrive folder (its just named that i dont have onedrive)
Ah, ok.
Nope still crashes
New log then.
Update JEI.
Game crashes, feel it's due to optifine. Anyone have suggestions or see somewhere a different version of it I can use. Didn't have any issues with it until I tried to use my shaders.
remove optifine
Not really the type of fix I was looking for xD. It all worked fine and then loaded the same shaders I've used before and then it broke. So I'm assuming its a mod, which when I figure out what one I'd rather just delete that mod tbh..
Read the immersive portals mod page - very. closely.
the part where they say these don't work well together
No the part about optifine versions
I mean I know i know I get messages every time I join a world with both of them, but always works fine for me.
Ahh yes I'm using the correct version according to them
G7
It's only when I load a shaderpack, nothing else.
Hey hey hey, I had that one bc it was the only version I could use with another mod then deleted that one bc of immersive portals like we were talking about yesterday and now I'm back on G7
Then you posted the wrong log?
Nah that's the latest.
Read it for version then like I did. It's G8
See I'm not crazy
Latest again...
Remove optifine, it seems to be an optifine issue, and ⤵️
If you have issues with Optifine, remove it. If you want further support try the discord found on their website.
https://www.optifine.net/home
Installing Optifine with modpacks on Curseforge:
- Right click the modpack icon, select
Open Folder. - Put the
Optifine.jarinto themodsfolder. - Now start the modpack.
I'll have to go through all the mods then n figure out which it is.
Ahh it's entity culling with optifine ig 🤷♀️
Hello people. I have a problem with Ragnamod 6. Recently my friends and I, have made an update (6.1.1) but it doesn't work. So we come back in 6.1.0. But i haven't create a new profile for each update. So today i have the 6.1.1 and CurseForge delete the 6.1.0 files and i need it back to play. Can you help me please
go to versions and select that version
It seems that for some reason they deleted the 6.1.0 version
i see that. But this is the only version who works on our server
and now i can't play with us
Nothing we can do about that, you could potentially ask the modpack authors about it
?projectissue
Please visit the project page for the content you posted about and look for a way to contact the developer.
Somewhere on the page there is usually a method of contact. Look for one of the following things:
Issuestab like the image below.- Discord link.
- Twitter link.
- Comments section below the project.
If no contact method exists you will either have to remove the project or find a solution on your own.
Ok thanks a lot for help
That or check properties and versions, see if you have it enabled. If so you may have a backup of it.
I'm unsure if this is possible but... I have a fabric mod i want to add to my Bedrock version of Minecraft. Is there any way I can do this?
@twin lark so essentially Chief is saying that this is impossible, meaning the opposite of possible.
heres my crash report
can someone help me
its for a improved version (i added more mods) of better minecraft 1.16.5
Must use specified version of structurize - not the newest available
Did you update all mods of something?
Failure message: Mod minecolonies requires structurize 0.13.252-ALPHA Currently, structurize is 0.13.254-ALPHA
i cant find that mod
i go to curseforge and download it from there
Downgrade the version to the one Briar mentioned
still doesnt work
Not vanillas way, you should probably check openloaders page on how to do it
Show a screenshot of it in your mods folder
which one?
Structurize
game keep crashing
I was just wondering if I needed to extract the zip files
Thats a config folder, not the mods folder
pyromancer is erroring, you should remove it for now and report it to the mod author
a different type of the same mod worked :/
wait nvm
is that one correct screenshot?
Give the new logs
how again-?
i go to the crash logs, and theres just one which is the one i sent you
!mc-logs
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
That is not the one named latest
i'm concerned about the whole notepad file associaton for JAR files there lol
Seems to be a mod doing bad stuff, however I can't see which mod mentioned anywhere
Remove the mods you added
cause i have 262 mods and 9 resources, will that have to do with anything?
i did the ones i removed are the ones that broke it i think
Try reinstall the pack then
So one of those 30 would of broken it, there is a reason modifying existing packs gets very little support
hmmm okay ill try addintg just a few different mods which have worked in the past then.
adding*
I have the same problem :((
fjust start a new one, i did that and im upset about it but thats all that i could do
like a new modpack
I have tried new modpacks but the error persists
Sorry for my English but I have to help myself through the translator
: ^
- Click on the Minecraft Tab on the Left side of the CurseForge App.
- Click
button next to the Create Custom Profileoption. - Click
Repair Installationoption. - Play game.
NOTE: You will not lose any modpacks or worlds, These are saved in the Instances folder. DO NOT TOUCH THIS FOLDER OR YOU WILL LOSE EVERYTHING
It didn't work : c
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
file = latest.log
do datapacks not work without the pack.mcmeta file?
Friend is having exit code 0 with a profile he put mods in
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
Zamn!
Yeah, that file is what mc looks for to determine a random zip/folder is a datapack
ah makes sense
Remove optifine
Hello everyone :) I am in need of some support
If anyones alive
So I'm getting the "Incomplete Set of Tags Received From Server" error whenever I try to join a server I just made (called Demon Slayers Unleashed). I downloaded the server pack, extracted .zip file, ran the forge installer, and then ran the actual server. I have no idea what to do.
The server is running a different modpack version than the client
Is there a way to fix it?
or do i have to install every mod seperatley or something
Delete the mods folder, config folder, default configs folder and the world folder on the server and copy the mods, config and default configs folder across from the client
Right click the modpack icon on the curseforge app and click
Open Folder, the clients folders are there
and then run the server like normal?
Yeah
Hm I'm still getting the same error
!mc-logs can you send these?
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
Incomplete server tags, disconnecting. Missing: {minecraft:item=[aquaculture:bobber, aquaculture:turtle_edible, aquaculture:fishing_line, forge:fillet_knife, aquaculture:tooltip, aquaculture:tackle_box]}
Seems to be aquaculture, double check that it is on the server and on the same version
on the server as in the mods folder?
Yeah
Is that the same as the one in your client mods folder?
ye
No idea whats wrong then...
[00:56:52] [Netty Client IO #0/INFO]: Connected to a vanilla server. Catching up missing behaviour.
use forge-x.x.x.jar not minecraft-server.jar
How on earth did I miss that
😄
I double click on it and nothing happens?
I just get the little blue loading circle next to my cursor and then it disappears
if you have java installed and name the file forgeserver.jar that will run it
or edit the name in the file (text editor)
that verbage is bad and i am bad 🤔
Wait so i just download that to my server folder and run it right
yep double click. read the contents if you are curious and want to see what it's doing
Java 8
back to 8 i go
oh 1.16.5 will work with 11
usually
it's in a weird spot since it was when it was all in flux. Forge enabled using it but some mods are not coded to accept. 8 is the 'target' that will always work
sorry - there's a version without REM before the actual thing that does the things xD
In ars nouveau can someone tell me how to turn off the pre-made spellbooks
They're pretty broken
And I cant find what tells em to spawn
In atm 7
If you playing on tlancher you can enter at mod option and confige mod.. in theroy
We don't support tlauncher here.
Kay, that is for #👽︱game-support how?
well alright can someone help me figure out why my modpack is crashing when starting?
it seems like it's caused by the FrozenUp mod
remove optifine, since it's incompatible with a lot of stuff
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
my baubles wont go into their slots
i have three mods that add baubles into my modpack. cyclic, bountiful baubles, and twilight forest
i do have the baubles reborn mod enabled, and its on its latest version
i can't put baubles from both cyclic and bountiful baubles even for the bauble's respective slots
is there any way to fix this?
how do i use those mods?
!mc-installmods
- Click
+ Create Custom Profile - Name it, select the required Minecraft version, select the Forge version (usually the highest number), click
Create. - Click the profile icon.
- Click
Add More Content - Search and install the desired mods.
- Start the game!
- Right click the profile picture or Open the profile and click the
Icon next to the play button. - Click

Open Folder. - Drag the mod(s) into the
modsfolder. (Note: Some mods will require others, to run. Make sure to read the instructions for the mod!) - Start the game!
Hey there, I've been playing a custom minecraft modpack lately but recently one of the mods updated and has broke the entire thing, When I try to select a world in Minecraft it will make me launch it in "safe mode" which doesn't actually do anything. I have no idea what mod could be causing errors. does anyone know whats going on?
?mc-log
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
theishiopian.parrying probably
also remove optifine until you solve the issue, it can cause more issues itself
Disabled Parrying and removed Optifine. Getting the same problems.
log?
Says the world is missing things
Need to repair that somehow, or put back the mods that added that stuff.
Other than that, hope you had a backup you can revert to and restore the mod versions that you had previously.
Alright that clued me into what went wrong
I've narrowed it down to 3 mods that are messing things up. thanks man.
My world is stuck in a "loading terrain" loop
I had to alt + f4
The creating of a world works just fine.
idk why you were allowed to use a onedrive folder for curseforge but you should change that
?mc-path
For Windows: C:\CurseForge
For Mac: /Users/Shared/CurseForge
- Click the
in the top left. - Select Minecraft from the list of games.
- Select the
Advancedoption and pickC:\drive. - Click
Continue.
- Click the
in the bottom left. - Select the Minecraft tab.
- Click
Change. - Select the
C:\drive.
:no_entry_sign: .minecraft folder.
:no_entry_sign: OneDrive folders.
:no_entry_sign: Desktop folder.
:no_entry_sign: iCloud enabled folders.
:no_entry_sign: or any other cloud saved folder.
:no_entry_sign: or folders with non-English characters in them.
If any of the above are in the path you need to change/move it!
Yeah I actually didnt know it was installed there
I did that and Im trying to load again
did you change things?
it installed a new launcher, which never knew your account since it's new
log