#ror2-tech-support
1 messages · Page 52 of 1
kinda the same, but for the dedicated server, everything runs fine until someonw picks up some of the new equipment, then the log is full of errors
My friend and I just beat the game to get the alternate skins for our characters. We waited through the whole cutscene but skipped the credits at the end due to time. Neither of us unlocked the alt skins for the characters.
@young steeple it’s pinned in #ror2-bug-reports-pc
Hi, im getting some really annoying FPS issues. more like every about 15-40 seconds my screen will freeze for a few seconds. i have tried turning off V-Sync in both game and on my Nvidia control panel, ive reinstalled the game several times, ive restarted my computer a few times. i was able to run the game on ultra a few months ago with no issue. any ideas?
Hope a patch comes quickly for all the major issues. Love the game, just wasn't able to play with friends unfortunately cause of it.
Exactly. I got like 5 people into the game and I can’t play with any of them because of these issues
usually i can rejoin my friend but now it saying i got an invalid clipboard id for it .... really really wanna play the game and beat it :T heck i just really wanna go for hours
the error i can say is usaually worse when i am playing with a friend across the country >.>
Since 1.0 I've been getting <50fps on startup, when I previously ran the game on Ultra at >60fps. Lowering graphics and turning off V-sync, bloom, ssao, etc. hasn't had any impact on fps.
Think the major issues seem to be FPS problem, massive lag in multiplayer, and the game killing bugs like that combination of items I heard about.
Yeah, the game being locked at 59Hz is also pretty big
Yeah, I used to get almost 100FPS constantly on maxed settings, and now I'm barely scraping 40-50fps. Any news on a fix?
To be fair, they were probably flooded with things like this after literally just releasing the new content. It'll probably take them at least a little bit to fix it, so I doubt we'll see anything tonight. At earliest I'd say tomorrow.
Not to break the conversation, but has anyone had any luck with the dedicated server? I have been playing with it all day with no luck. I see a number of servers available, so it looks like there has to be some working configuration.
I managed to get the server to appear in Steam>Servers>Favorites and I can join, but it does not appear in the internet servers or in-game servers list and I am unable to interact with any Change Character or Ready buttons (presumably any action that requires interface with the server).
I am able to connect using with and without headless= (as per prior to release), but when opening in non-headless mode the window is black with only the cursor visible.
Yeah, I'm cool with them taking their time. Just hope it isn't too long
hey my UI is crooked a bit and the UI antialiasing isnt fixing it
So the game is running terribly for me. Not so much the framerate, but the game stutters constantly
I have all my settings as low as they can go and my pc should be more than enough to run it
The first minute the game will run perfectly, then the framerate drops, it stutters, and all my audio starts bugging out
@undone hedge this guy is sending links to people for money
@marble mantle Im having a similar issue with stutters
My Xbox One controller works fine on any other game but when i try playing ror2 it wont let me move forward or backwards, I can move side to side and sprint but Its as if the game doesnt recognize the input.
still cant launch the game
black screen into not responding gg ez
nvm after the 4th fresh install it works now
Hey guys, it may be known already but I'm running an AMD Ryzen 7 build and I noticed that in recent updates and especially this last one i've been dropping to lower frames, from 60 to mid to low 30's, sometimes worse when a lot of effects are going on. I have a video example here, and because it's from Shadowplay my PC specs are visable in the video description:
https://www.youtube.com/watch?v=eszTgh4feNc
Interestingly, my friend who has a 5 year old Intel CPU and a GTX 1070 ran the game at this part at 60 FPS, so that's a bit off putting.
Edit: Also I did try turning off G-Sync to check if that was a problem since I have a G-Sync monitor, didn't seem to change anything.
GPU: GeForce GTX 1660 Ti
CPU: AMD Ryzen 7 1700 Eight-Core Processor
Memory: 16 GB RAM (15.93 GB RAM usable)
Current resolution: 1920 x 1080, 144Hz
Operating system:
The server lobby isn't filtering out games in progress, regardless of how you toggle the filter. Worse still, you can't join a game in progress even if you wait for the next round/level to start. You're trapped in spectator. There's no way to tell which lobby has yet to start and which have already started because the map images are also not 100% accurately representing the level being played
so im stuck on the final boss because me and 2 other survivors are in the final boss arena and one player is stuck down below pls help
hi can i ask on: Why i cannot enter a lobby with my friends?
they will start the multiplayer lobby but i will be booted to main menu
it only happens to me and all online solutions does not seem to work
Im also getting constant crashes ever since 1.0
ive never had mods installed or something
Any idea why my friend is getting version mismatch, we both have the same mods installed, but his version isn't coming up as modded
I've beaten the game a couple times today and Purity won't unlock. Reeee.
they will start the multiplayer lobby but i will be booted to main menu
@safe quest I'm having the exact same problem and haven't been able to find a solution. I've tried a number of things including reinstalling and changing my firewall which hasn't worked. I assume it's a network issue. Has anyone else figured it out?
My friend has a crash problem. when he tries to open the game it shows the game with black screen for a sec and then it crashes, we tried tons of stuff like restarting the pc, restarting steam, restarting the pc, running steam as admin, changing the resolution, plz someone help
@orchid flame sry for the mention but it says ur support.
non of it worked ): im wating them to respont to my email now ):
Hi! Been trying to play the game for a bit - but for some reason when I'm playing the game at some points (stage 2, stage 3, and beyond) my game will get very very low FPS rates (15, 10, even down to 2). I've changed the game's graphics settings. I've tinkered with the nvidia settings. I've set the priority of the game to high in task manager, etc... but no matter what I've done the FPS just gets lower and lower, but the GPU and CPU usage stays the same (12% average) on menus it spikes up to 50-70%. When I spawn a boss, gpu usage goes down to around 5%
I have a GTX1050ti and a i7-7700. Cheers x
Sorry to say, but the game has gotten to be unplayable in multiplayer with 1.0.
I get lag spikes in the regime of seconds long, with frequent jumps in the movement of other players or enemies. It's already difficult enough not to die when you can see what's going on, but this is just not okay any more.
Yes, we are on different sides of the Atlantic, but in a connected world like ours, you should not just tell people to suck it up when they have friends outside of their neighbourhood.
My game freezes every second when it gets down to 5 fps during the stage 1 boss fights 
My experience so far is If I reboot my PC, the game is fine for about an hour. Then after that it starts stuttering, even in single player. if I restart the game, it continues to stutter. Won't fix itself until I do a full reboot. very queer.
Hi, I wanted to know if the game will be available for macOS in the near future?
@mild ridgeHi. Sorry for the mention I was just wondering if the latest 1.0 update uses the latest version of Steam P2P API (wasn't able to find the answer to this in the latest changelog), because the multiplayer issue we were discussing a couple of months ago https://discordapp.com/channels/417739215355510784/559902278018924557/720899782146523207 and I would just like to rule out the possible problems leading to it. In any case good job on a (mostly) very successful release 😁
Hello is any Mod on? My friend got banned permanently for litterlally "Spamming" "XDDD" once in Chat
@spare sapphire I'm also tinkering with it. If you make any progress please post it here (or somewhere)
@topaz yarrow
https://media.discordapp.net/attachments/559901542787055636/742551050732437594/1.PNG
Workarounds with direct connection and lan emulated one still works.
Is anyone from @pallid ibex actually going to acknowledge the FPS issues at any point?
There are reports all over the place from players with varying different hardware, it cannot be a coincidence.
Even a simple acknowledgement would go a long way...
@gritty egret may i see your log?
@steady topaz I'm currently on mobile only/away from my machine, but will happily drop you one a bit later today if it helps 😊
@gritty egret there is an ongoing issues with performance that i cant fix, but id get a look anyway. It might be cpu related.
Are you using any rtx gpu card?
@steady topaz oh no RTX here my friend! I have a laptop which is modest by today's standards, but at the same time it should not be struggling and hasn't before.
Specs:
i7 6700HQ
GTX 970M 3GB
16GB DDR4
Usually I am good for at least 1x loop before I experience dips like I am now. Can barely get through stage 1 without severe drops to 25-30fps. Seemingly random too and not necessarily correlating with action on-screen.
Hey is there a way to rent a server ? because my friend and i want to play together but its lagging as hell
@tame sundial read that, might help you.
https://discordapp.com/channels/417739215355510784/559902278018924557/724218038651453511
@gritty egret in case of laptops performance issues might come from throttling. Check that temps are fine while you playing. Game is single core mostly. When temps goes high - your laptop reduces its performance and in case of this game - cpu core speed drops and it creates alot of framedrops. Your gpu barely do anything, but cpu is bottlenecked.
You can check if that's the case from cpu-z program, it shows your cpu performance and most importantly - the cpu core speed.
Apart from that - your pc should be handling this game just fine.
My Xbox One controller works fine on any other game but when i try playing ror2 it wont let me move forward or backwards, I can move side to side and sprint but Its as if the game doesnt recognize the input.
hey don't know if this is the right place to ask about this but whenever i boot up risk of rain 2 my wifi goes from 250 mbps to 8mbps and i'm not in any game, i'm just in the main menu. it began ever since the game turned into it's full version
i have tried with other games too and it's always ROR 2 that it happens with, does anyone have a solution
@steady topaz thanks mate, I'm all too aware of thermal throttling, but my temps are fine. I actually have some undervolts to mitigate this too.
Like I said, game ran perfectly fine before 1.0. Given the reports from others with both better and worse hardware than mine, I definitely think this is related to the update.
Appreciate the help though!
@gritty egret It shouldnt be. The engine wasnt changed in any way. But it might be, just because there was a number of similar reports. This might be new issue that we wasnt having before. Still, worth to check the cpu speed.
Hi everyone, I think any directx 11 game crashes on launch. I've tried searching and updating things idk what it is im updating. But no luck in making this work.
Games i played 2 months ago no longer launch and I don't have a restore period dated 2 months ago. Any ideas?
@safe swan What exactly happens when you try to open the game? Any errors?
Different games say different things, but I think a month ago my 2nd monitor started saying
"unsupported mode"
nothing loads though, I'm not too sure how to look at the specific errors. Black screens or different errors pop up. When 2nd monitor stopped working I tried updating all drivers and Microsoft visuals.
So if you specifically open Risk of Rain 2 right now, what happens
looks like the common bug where black screen and music plays then unity pops up and crashes.
Small bug i dont know how it was caused, anytime i try to open settings the game crashed.
I've tried
-Verifying game files
-reinstalling
-deleting the game manually and then installing again
None have worked so im at an impass
@fallen blade Can you post your output log? You can find it here C:\Users<UserrName>\AppData\LocalLow\Hopoo Games, LLC\Risk of Rain 2\output_log.txt
I can't start the game. the same problem was when I bought it,but the problem was solved then. however, after the release of the game again began to crash at the launch stage.
the problem was solved when I downloaded the pirated version. after that, the game was launched on steam.
@placid elm Yes here you go, thank you in advanced
^ is your screen black with music playing and unity pops up = crash?
the bottom one is my wifi when i had opened ROR2 and was just in a menu while the top one is after i closed the game. does anyone know why Risk of rain sucks up my internet?
it makes it LITTERALY impossible to play multiplayer, and it began after 1.0 came out
^ is your screen black with music playing and unity pops up = crash?
@safe swan the game starts, a black screen appears, lasts for a few seconds, and then turns off
Have they addressed the issue with the massive lag even though it worked fine when you first got it
@fallen blade Hmm no real info in the log. Can you try opening Event Viewer and looking in Windows Logs -> Application for any errors? Easiest way to check is by opening the game and making it crash, then open Event Viewer immediately afterwards.
Faulting module name: ntdll.dll, version: 10.0.17763.1192, time stamp: 0x5854f5da
Exception code: 0xc0000005
Fault offset: 0x000000000004a153
Faulting process id: 0xa10
Faulting application start time: 0x01d671865bf8a4d3
Faulting application path: G:\SteamLibrary\steamapps\common\Risk of Rain 2\Risk of Rain 2.exe
Faulting module path: C:\WINDOWS\SYSTEM32\ntdll.dll
Report Id: 81345f03-d6f5-46f6-add3-697b4a0da7e8
Faulting package full name:
Faulting package-relative application ID: ```
this is what i seen, its the one marked "error" after i made the crash happen so im going to assume its it
Regarding the error above, it seems to be a corrupt dll, in this case ntdll.dll
Only way to fix this is by replacing the corrupt dll with a working one, so currently waiting to hear back.
Hello I have some question about the game performance in my Lenovo Y520 because even in lowest setting and some tweaking (Nvidia setting and undervolting) the game is having some lag spike in heated moments in game resulting mostly dying at lag
Same
I need help to I have incredible lag but it worked fine when I first got it
@placid elm hello. you told me to write you if it happens again
@long swallow a bit unrelated but thank you for proving to me that it's not my pc's fault that i have no wifi when i run the game.
and i got the y530 and i also experience lag spikes occasionally
@sly parrot Hey, sad to see it happened again. Can you check your Event Viewer for me? Open Event Viewer and go to Windows Logs -> Application. See if there is any new error at the top
bruh... how to open Event Viewer? 😄
@long swallow these are my specs
Do yo use HDD or SDD?
Guys, help me, we can't start the game with a friend together, when we start the game in the lobby together, the one who is not the host is thrown into the main menu, and if you enter during the game, then he just has a black screen
this?
@sly parrot Correct, look in the ones that match the time when you crashed, and see if any of them mention risk of rain
Probably the one labelled application error
@long swallow i had the game on HDD
found..
If you can put it in the SDD and tell me your result
Is there a changelog for the patch that just went live?
@long swallow#756 have you figured out how to fix that horrible lag
Nope Tried what the Internet said
I dunno if i need an SDD and More Ram to run it smootly
Dang do you thing they will make a hot fix to fix it
Since 1.0 when live I couldn't play the game, when I open it from steam, it'll open as this tiny window and I can't figure out how to fix this, please help I want to play tha game
thats the question i need to know to the developers
if its a game issue or the Laptop issue (Need SDD/More ram??)
lots of people are also having the same problem though
Will o Wisp + Gas + Horde of Enemies = Total Lag Spike High chance of dying cause of LAG
I recently upgraded to RTX 2070 Super and i9700F @ 3.00Ghz (8 Cores) CPU and the lag is still very noticeable
I just get like 5 FPS anytime in the game even in menu
@last escarp in the channel #ror2-bug-reports-pc or create a ticket at https://gearboxsoftware.zendesk.com/hc/en-us/categories/360001615171-Risk-of-Rain-2 with all the attached logs and other info you can gather
Don't really want to overclock the CPU for higher performance... :/
Well have nothing to do to just wait for answers form the developers :P
I fix the FPS drops temporarily by restarting my PC and opening RoR2 more or less instantly. An hour or two later the FPS drops start kicking in again
Welp that certainly didn't fix the problem
Guys, help me, we can't start the game with a friend together, when we start the game in the lobby together, the one who is not the host is thrown into the main menu, and if you enter during the game, then he just has a black screen
The gesture of the drown with Gorag's Opus is Bugged
Ребята
@fading estuary Please submit bugs in the channel here: #ror2-bug-reports-pc
My friend and I want to play, but when he comes in he can't do anything, no character can choose anything
we neeed help
My pc keeps blue screening when I play with my friends. After like 20 mins it blue screens. My friends don't get the problem. It only happens when I play Risk of Rain 2. Yesterday it blue screened and 2 days ago it blue screened 3 times in a row when starting new matches with friends. My pc is not overheating and no other game does this. What's the problem?
I have a problem with online play.
When I or my friend enter the lobby, the one who is connected cannot select a character or press done. Sometimes the game crashes onto the loading screen. Thanks in advance for your help.
I have a problem with online play.
When I or my friend enter the lobby, the one who is connected cannot select a character or press done. Sometimes the game crashes onto the loading screen. Thanks in advance for your help.
Since 1.0 when live I couldn't play the game, when I open it from steam, it'll open as this tiny window and I can't figure out how to fix this, please help I want to play tha game
@nimble salmon Can someone help?
does anyone know how to fix the large fps drop even when you have more then the recommended graphics card?
It scares me a bit that there is nothing mentioning the fps issues here.
Or the unity crashes
Tried playing yesterday with friends, and one could not keep a stable FPS or stop lagging at all. Discord call was fine but the moment they launched the game, their connection went to crap. i7-7600 and a GTX 1080, with 400 down, 10 up.
Single Player was reportedly okay for them too.
@timber geyser В чём дело, дед?
@steady topaz Короч , с другом не можем по онлайну играть , после лобби он не прогружается и сразу отлетает в главное меню , когда он хост тоже самое
@timber geyser У вас трабла в настройках NAT, раньше коннектилось?
@steady topaz Когда играли на бесплатных выходных , месяца 2-3 назад , было норм
Щас купили и все
Трупики
So, any news on actually fixing the dedicated server?
Not really as far as I know, they are fixing the server browser tho
Also getting a lot of lag, even in singleplayer. My pc never had issues running the game before. GTX 1660, i7 9750, 16gb ram. It seems like it just stutters a lot
so i just launched the game since 1.0 update and when i get in game no hud seems to appear, i tried verifying steams game cache but that didnt seem to do anything. is there any fix?
I can't see hud either. Just sounds. And I just bought the game
Since 1.0 when live I couldn't play the game, when I open it from steam, it'll open as this tiny window and I can't figure out how to fix this, please help I want to play tha game
@nimble salmon
In case anyone else has this issue, we fixed it by changing the resolution manually in the config.cfg
update: i tried reinstalling the game and deleting a mod folder i had installed in the directory and that seemed to have fixed it 👍
My buddy has a pretty weird problem going on. So he's had his new computer for about two months now and he can run high-end graphic games fine for hours on end with no problem, however when he runs Ror2 he can get about 10 minutes at most into a run and his entire PC will crash, he has all his drivers updated he's tried uninstalling and reinstalling both the game and Steam and nothing has seemed to work, any thoughts on how to fix it?
@wooden mantle rtx gpu?
I believe so, obviously since it isn't my tower I don't 100% know
@wooden mantle some people with rtx gpu have this crashing issues that we, as a comunity doesnt know how to fix. Its related to drivers. 😐
that's weird, I use gtx and mine runs fine
Does anyone know how to fix the problem after installing the toomanyfriends MOD where it changes the version of ur game ?
@wooden mantle it is, some people have this. Like.. why only some if its driver related? Anyway, we dont know how to fix that yet. Ask your friend if he gets similar issues with other games on unity. Subnautica maybe?
I've tried instaling the other steambuildID MOD and Unmodded Clients MOD, but they didnt solve the issue
@warped quail modmakers need to update mod versions. For versions you need steambuild_id mod or unmodded clients. Refer to modded discord server on any mod questions. You will find invite link on the head of thunderstore.io
alright also I did switch to an NVIDA one recently but still never had any issues, wack
Hmm....Ill take a look there, but ppl dont answer things often there
@warped quail likely because things isnt fixed yet. Game gets fixes and there was an update lately, its not a stable time to fix mods.
In Distant Roost i can't see the newt altars. At first i thought i was unlucky, but when my friend saw one that i couldnt see i figured i had a problem. I tried verifying files, re-installing the game and updating drivers, sadly i still can't see the newt altars. Anyone else experienced this/knows a solution?
@steady topaz so there are known issues with rtx gpus?
@valid vortex there are issues in general. Crashing ones happen to rtx gpu more often than others. Asked devs about those particular crashes and the answer was - its likely related to driver.
Other game forums also report about such problems.
No known solution.
Hey all, I'm hoping someone might be able to help with this one. My friend keeps crashing like this when we play. We were hoping the 1.0 release would fix it, but no go.
Nvidia card, AMD chipset, all drivers updated, backrolling them didn't help either.
Crash happens randomly. 13 minutes, 2 hours, a lot in between. No warning, and it happens even on the lowest graphics settings.
Any insight/possible help? We were big RoR1 fans, not getting to enjoy this would suck.
⬆️ See? I bet there is logbook entry that mention dx3d error.
@valid vortex there are issues in general. Crashing ones happen to rtx gpu more often than others. Asked devs about those particular crashes and the answer was - its likely related to driver.
Other game forums also report about such problems.
No known solution.
@steady topaz damn :<
hope that it will be fixed soon or at least there will be a workaround
those mini crashes cause many of my runs to die
but thanks for the info
ushually logbook got this entrys for that particular crash thing.
d3d11: failed to create staging 2D texture w=128 h=2 d3dfmt=10 [887a0005]
d3d11: failed to create buffer (target 0x1 mode 3 size 36640) [0x887A0005]
I guess I'm lucky then or something, but maybe I'm not on the latest drivers still
Based on what I have gathered from the Pyre server (the only dedicated servers currently running), it looks like a manual programming fix was implemented by some users, suggesting that most users will not be able to get the server running until a fix is provided by the devs.
However, I am still unaware as to the nature of the issue.
@trim wedge there is none, instead you chose from aviable hosts now.
alright, but every lobby i join is currently in game
even tho i checked no started games
@trim wedge make your own and wait, or look for party in #lfg-pc-ror2
@steady topaz aight will try that
I’m having joining people games on consoles because the removed the cursor
I’m having trouble is what I meant to say so
I know theres no fix for it but is there still no plans for fixing the unity error?
@short folio rtx? If so try older drivers.
No
Ah.. i forget people i contacted. So many crashes.
Radeon RX 590 Series
AMD Ryzen 7 1700X
Yeah. I get that there is no set solution to it but I just want to know if there are any plans for patching it in the future. It wasn't mentioned in the list of bugs in today's announcement
There wasnt any mentions on performance, i guess the goal is to fix the gameplay and design flaws by now.
@mild ridge people demand to know if something is cooking about performance and crashes issues in the dev kitchen?
Haven't seen any comment regarding the Unity crashes, but hopefully they are looking into it. Seems like quite a few users are experiencing it.
@steady topaz is this about startup crashes? or crashes during gameplay
its about crashes in general, some people also having bad performance after update, where they had none of such issues before. like in 1 day
Same for me too, random crashes. Sometimes unity sometimes not
and i did not have thos before the hotfix
crash logs would be useful. I'm not sure why the hotfix would change this since we only touched two things
@wintry rampart
Logfile
C:\Users\USERNAME\AppData\LocalLow\Hopoo Games, LLC\Risk of Rain 2\output_log.txt
Error and crash.dmp should be there too, but if not - check
C:\Users\USERNAME\AppData\Local\Temp\Hopoo Games, LLC\Risk of Rain 2\crash.dmp
as usual I'll also recommend making sure that system RAM isn't being overclocked during gameplay by any sort of gaming performance software or motherboard feature from the factory
as that's a huge cause of random crashes
@mild ridge to give some context, the unity crash they are referencing looks like this. It specifically ties to the UnityPlayer.dll. I know some people have submitted tickets as well. I don't personally have this issue however
performance-wise, I'm also curious to know if issues are only occurring after opening the game browser for the first time in a session
That hasn't been the case for me. I can be playing multiplayer or solo
@steady topaz So Output_log?
@wintry rampart i should add the names in the end, my bad. Yes its the log.
and what am i looking for
Drop the files here. Crash.dmp isnt very helpfull to anyone but the devs. But you can read the log. Search for "crash" if you crashed in last run.
But if you rerun the game - log gets rewritten.
So if i only have output log, it will not help?
I mean, crash.dmp created after you crash. Log creates every time you run the game untill you close it. And when you closed the game (or it crashed) and ran it again - you still will have the crash.dmp, but the log from that session will be rewritten and not usefull.
So if i dont have crash.dmp, i cant provide any useful information...
@wintry rampart what the issue you get with the game? Is it crashing?
It was, but it is not consistent
Sometimes after 1 min in menu
sometimes 15 min ingame
Its unlikely that you get this problem after the last hotfix. Are you shure it wasnt happening before?
Okay, when this happens again, do not rerun the game. Go to the folders i showed you, fetch the 2 files - log and crash, drop those here and ping me. Ill get a look into.
Okey Thank you @steady topaz you are a star
http://api.steampowered.com/ISteamApps/GetServersAtAddress/v0001/?format=json&addr=85.10.195.233
Would anybody know why a dedicated server is being rejected for bad_version, I cant seem to find anything useful about this error online or on this discord.
@orchid flame there was a hotfix for the game. Did you updated?
yup, even tried to download the newest build using the depot id to double check
hi so my brother has a problem that everytiime he shift +tab for steam overlay or alt+tab to go to another window for a sec the game freezeing and his cpu is going to 100 is there some way in the setting to fix this problem?
Wait so should we disable XPM when playing this game?
@placid elm how fix :o would deleting the unityplayer.dll work?
I'm about to try that @jovial tartan
@silent yacht Haha, definitely don't delete that file. If your crash shows the Unity screen, you likely can't fix it easily on your own. Seems to be a lot of people with that issue in this patch
Best thing you can do is collect the crash.dmp and output_log files
And post them here
Beau just tried it myself, seems more stable FPS without XMP enabled
@jovial tartan yes, set it to disabled in bios
Weird...
anyone getting a crash after playing an hour or 2? I'm getting a black screen then my computer restarts
@heavy anchor check what happened before your pc rebooted in windows event manager.
ok ty
@orchid flame i saw people talking about issues with dedi, some kind of error there for now. You better to look for that with ctrl+F on this whole server. Cant find it again myself.
@wintry rampart can you get us a pic of unity error, and also drop the logfile anywy. Pm preferable so i wont lose track.
When it happen again i will PM you everything
Sounds good. Its late on my clock, ill get a look when i got the time. Any description on where or how this happened would be nice too.
will try
I think my issue was related to exceeding my power supply. odd though since it only started happening today, played RoR2 yesterday for a lengthy period and it was fine
[Sorry for the copy/pasta] Hello, I'm looking for a mod that shows what items do before you pick them up. Or, in case that doesn't exist, a mod that allows you to drop items. Does anyone know if it exist?
anyone having rubberbanding issues on a wired connection with those in similar regions
@orchid flame these files indicate a crash related to graphics drivers/directx
@orchid flame Was it random for you too?
@wintry rampart have you checked to see if XMP is enabled?
Dont know, let me look into it
So i have been having this problem where my game says i dont have anything binded for keyboard but i somehow go to the bind screen and
and my mouse wont show up
@mild ridge thank you so much
😄👍
@mild ridge I've included logs from a few people in a ticket (ID 221144) in case you want to take a look. It's also regarding random crashes
@mild ridge Would someone using a hotspot for their connection have any conflicting issues with hosts, a friend of mine is unable to properly join, all he gets is a weird character select screen that looks like https://cdn.discordapp.com/attachments/276560473258983424/743558151156007013/20200813155359_1.jpg
anyone know why antialiasing isnt working for me?
My game crashes 100% of the time when I click 'Join Multiplayer Game'. I'm on arch linux
@placid elm I don't have access to support tickets. if you want to upload them here I can take a look
though if it's just random crashes during gameplay I'd suggest you make sure you don't have XMP enabled
@mild ridge I was afraid so! Just don't want to clutter the channel. I can send one set of logs here. The person with the issue isn't tech savvy so XMP being enabled is unlikely (assuming it isn't factory default).
@placid elm it often is enabled by default, as far as I'm aware
looking at these files that seems like the most likely case
@mild ridge any ideas why this is suddenly an issue in 1.0?
@placid elm I don't know about 1.0, but I think it's an issue some people have had since the skills 2.0 update
we updated the Unity engine version with that patch (I think it was that one, anyway) and apparently XMP RAM overclocking doesn't play nice with that somehow and leads to various memory corruptions
@mild ridge I work in QA, so I feel your pain for that one. Regarding the previous logs, I checked the motherboard the person uses and it simply doesn't allow for XMP profiles (older model using the H81 chipset). The only thing it has is RAM timings, which is set to Auto by default. Any other ideas on what it could be related to?
@placid elm I know in a couple of rare cases the issue was fixed by updating motherboard BIOS
@mild ridge Gotcha, I'll keep that in mind, appreciate your time!
hope you find a solution. wish I could dedicate more time to checking in on this case, but I can't really spare from the next patch right now
@mild ridge Don't sweat it my friend, I'm sure you have a mountain of Jira tasks to look at
Hello, I recently bought the game. When I launch the game I can hear the music but no hud appears. I've tried all there is in the pinned comment but to no avail. Has this happened before to someone?
Sorry could you elaborate?
hold on, I'm wrangling the bot right now
Hey, after installing today's update, I no longer can get more than 15-20 fps. I tried doing what the FAQ said (turn off vsync in NVIDIA control panel, update drivers, and restart) but it only works until I get into a run, once I load in its back to being basically unplayable. I have a decent computer and I'm running lowest settings. Is there anything else I can try, and are the devs aware of this issue?
I'm having the same framerate issues as well, however I had a fix, for a brief moment, I'm pretty sure it's tied to fullscreen resolution. I was messing around with the settings to see if anything would change, I turned off bounce lighting and back on again I believe and for some reason my framerate went back to normal in fullscreen
I alt tabbed out to tell friends but when I went back in, framerate was cut in half again
hmm ill give it a try too, its sad bc i just wanna obliterate on cap rn 😦
Is there way to loop outside of using the artifact portal
?files
@mild ridge,
Output Logs
While the game is running, it is continually writing to a file called output_log.txt. This file can help us get more information about the issue. If possible, please upload the file here. The file is usually located at:
C:\Users\<UserName>\AppData\LocalLow\Hopoo Games, LLC\Risk of Rain 2\output_log.txt
Crash Dumps
If the game crashes it will generate a Dump file. Similarly to output_log.txt, it can help us track down the source of the crash. Please upload your crash dumps here if possible. The file is usually located at either:
C:\Users\<UserName>\AppData\Local\Temp\Hopoo Games, LLC\Risk of Rain 2\Crashes\crash.dmp
or
C:\Users\<UserName>\AppData\LocalLow\Hopoo Games, LLC\Risk of Rain 2\Crashes\crash.dmp
@thorn sierra ⬆️ if you can upload your output_log.txt I can see if anything immediately stands out
yep!
@thorn sierra unfortunately nothing seems to stand out here. you could try alt+enter to force the game to switch between fullscreen modes and see if that fixes anything. updating your graphics drivers might help if you haven't done it yet
I just tried alt+enter and it didn't work. Updating drivers didn't work either.
But thank you for the support
🙁 hope you get a solution soon
@mild ridge I updated my drivers and directx but still just got the unity crash
Would you mind uploading the new log/crash files so I can see if it's the same type of crash?
Hey @mild ridge i have a quick question
@thorn sierra when you say no HUD appears, what do you mean exactly?
When I go to join a friends lobby or I join theirs we get to the character select screen and everything is blank and we cant do anything. But the person hosting it is fine only the person who joins, and idea how to fix?
@placid elm I can't see the menu, or anthing. It just keeps showing the steam library. I can hear the music playing and see the game running in my task bar but nothing I do it shows the game
I can post a picture on what it looks like
@thorn sierra can you drag your config from here: "C:\Program Files (x86)\Steam\steamapps\common\Risk of Rain 2\Risk of Rain 2_Data\Config\config.cfg" (your path might be different depending on where you installed the game)
Just drag it into this channel here and it should upload
Yeah post a picture coldy
Here it goes
Try to replace your config with this one. I just changed the resolution slightly and forced Window mode. Let's see if it does anything for you @thorn sierra
whoops sorry wrong ping
@orchid flame I found this post on the forums for Subnautica (which uses the same engine we do) about the same error code, might be helpful https://forums.unknownworlds.com/discussion/comment/2394503/#Comment_2394503
Hi there fellow survivors, my game crashes to desktop after about 10-20 seconds of freezing.
@thorn sierra that message was meant for someone else, my bad
probably won't help with your issue
Ah ok
what ports are used by RoR2 multiplayer?
I'm having issues where multiplayer shows up as empty on char selections
@thorn sierra If you select the Risk of Rain 2 window in the task bar while it's open and hit Windows key + Shift + Arrow Key Left/Right, does that do anything for you? This is to make sure it isn't being hidden on some disconnected unknown monitor (this sometimes happens in Windows). This key combination basically moves a window to a different monitor.
@wheat basalt I think steam p2p uses the following ports:
UDP remote port 3478
UDP remote port 4379
UDP remote port 4380
No it did not work. On other note, is it normal for UnityCrashHandler be open at the same time?
Yes that is normal
@wheat basalt still not sure. as far as I'm aware it just randomly started happening one day without us updating the game at all
ok i brought it down lower than before
@thorn sierra I assume you mean that you can see it in task manager, right? It shouldn't be in your task bar
Yes, task manager
I tried to make a recording to show you what happens. But it's wierd it only shows a black screen instead. Can I post it here? It's very short
Are there any docs for setting up the Dedicated Server software on steam? It was working for me before the 1.0 update
@thorn sierra just DM me the video
is there a way to increase fps after the patch
@placid elm Damn, I can't the file is too big
Hmm I'll DM you, we'll figure it out
Is there any way to make multiplayer on a hotspot work?
I've struggled with this since the game launched
@lilac ferry there are some issues with dedicated servers at the moment. I'm currently working on dedicated server fixes for the 1.0.1.x patch
What should I do with all the FPS drops?
I already tried putting the resolution to a minimum (less than 400x600), and yet it still drops a lot, even in the main menu sometimes
Just started happening after the update, it literally unplayable right now
@regal plover grab some hardware monitoring software like CPU-Z and take a look at your CPU/GPU/memory performance to see if anything looks out of the ordinary. I know on several past occasions people have ended up with their system/performance management softtware underestimating how much power the game needs and throttles the CPU performance
help
@outer shadow unfortunately we don't have a good solution for the networking connectivity issues unless you or a friend goes through the process to set up port forwarding on the machine that will host and then having all other players connect by IP in the console
Thanks for the tip @mild ridge ! If I find something wrong in there, what should I do?
we built our game primarily on Valve's steam p2p networking library and I have no idea why it's not providing us the necessary data
that'll depend on if you find anything unusual
like if you see your CPU clock speed keeps going up and down or if it's way lower than it should be you may want to investigate what on your system is responsible for managing that
thank you
for reference, the host needs to have UDP port 7777 forwarded to their machine
then, connection can be performed by opening up the console with ctrl+alt+~ and then using the connect command in the format connect ipAddressGoesHere:7777
somebody found a temp fix for dedi servers until next update but it requires you to manually decompile and recompile the game (i wont share it here because im sure thats against the rules?)
@outer shadow you and your friend can try forwarding UDP ports 3478, 4379, and 4380
doing that alone may be enough
I've got him to forward a few ports but I can't port forward my phone hotspot unfortunately
We are getting closer though
I can see his character on the char select screen i just cant pick mine or hit ready
it was just blank
console is being spammed with the following
Send Error: NoResources channel:6 bytesToSend:8</color> <color=#FF0000>Failed to send internal buffer channel:3 bytesToSend:8</color> <color=#FF0000>Send Error: NoResources channel:3 bytesToSend:8</color> <color=#FF0000>Failed to send internal buffer channel:6 bytesToSend:8</color> <color=#FF0000>Send Error: NoResources channel:6 bytesToSend:8</color> <color=#FFFF00>Attempt to send to not connected connection {1}</color> <color=#FF0000>Failed to send internal buffer channel:3 bytesToSend:8</color> <color=#FF0000>Send Error: WrongConnection channel:3 bytesToSend:8</color> <color=#FFFF00>Attempt to send to not connected connection {1}</color> <color=#FF0000>Failed to send internal buffer channel:6 bytesToSend:8</color> <color=#FF0000>Send Error: WrongConnection channel:6 bytesToSend:8</color> <color=#FF0000>ServerDisconnected due to error: Timeout</color> <style=cEvent>Tyler disconnected.</color>
I can see his character on the char select screen i just cant pick mine or hit ready
@outer shadow I remember having this problem before the update, what I don't recall correctly what I did to fix it, but it was related to Steam invites I guess? I mean, for example, if my friend invited me the glitch would happen, but if I invited him, it wouldn't happen
I don't remember if joining the game instead of accepting an invite would change something
But I do remember that these issues were happening due to Steam, not really sure tho
I think that what's happening is that @bold furnace's game traffic is being sent to you, @outer shadow, but until your game sends back an acknowledgement that you got the data @bold furnace's machine has to hold onto it and keep resending it until it hears back that you got it. If traffic from your machine never reaches the other machine, it has to hold onto this data indefinitely and then runs out of the memory to store the stuff it has to send that keeps piling up, thus why you would be able to see changes from their end and why their console would be getting those errors.
my best guess is that something between your machine and theirs is preventing your traffic from being delivered, whether that's your firewall, router, or internet route, or their router or firewall
not being able to forward those outbound ports from your end might be a part of the issue
well
tyler ur broken
thanks for your help
were there any good fixes for the dedicated server?
because it feels like the gorags opus and the lunar item and gesture of the drowned absolutely demolishes the server with errors and it quickly dies
@drowsy nacelle vamist is mentioning that there is some fix available. idk what all needs to be done. modding isn't against the rules here and we actively encourage it but posting whole modified binaries isn't permitted
@drowsy nacelle yeah, that's it's an issue with captain/equipment drone and gorag's opus we've fixed in the coming 1.0.1.x patch
gotcha, i've heard about it these binary patches, I do understand the no-redistrobuting thing
oh! thanks!
@outer shadow hope you can figure out a solution🤞
i'll let my friends know! we were super confused and a little almost frustrated, thanks for some clarifications! do you know if there are any other weird combos that cause errors to avoid until the patch?

@drowsy nacelle I can't think of anything at the moment, we've got a ton of stuff to fix up but I can't think of any other interactions like that at the moment
plz make announcement when dedicated servers are fixed 😩
the dedi server fix is for servers that are getting the "bad_version" error
the guide on how to fix it is here https://user-images.githubusercontent.com/44256866/90192111-286b5600-ddba-11ea-8fec-069510eff6d2.png
note: steamworksServerManager::Update step is not needed.
After playing around with CPU-Z and checking the Clock Speeds I did noticed something
This is the normal speed, no fps drops, the game is quite stable
another question, in the dedi server logs, there is something along the lines of Could not load config /Config/server_pregame.cfg, is this a config I have to make myself? or am i just somehow not generating this config
Whenever the fps drops starts happening, the speed of my cores drops into this value
Sometimes they drop at the same time, sometimes they drop one after another
@drowsy nacelle you need to make it, it was added in 1.0 update, but its also safe to ignore
I'm in no way a tech expert lol, so, anyone has any idea on what should I do to keep the clock speed stable?
@regal plover also yeah, setting the priority for the server to be higher has helped FPS and stuff in-game it feels, I always set it to have the most priority under system processes' and i feel like theres improvement
also... I dont know what exact intel CPU you have, but if it's an unlocked CPU, you could download the intel overclocking tool and mess with the turbos to keep it... more stable..? otherwise, possibly increasing the priority of the server process might make it more stable
@orchid flame gotchaaa, is there a template I could look at? or does it just set things like artifacts/difficulty?
theres no template afaik, and i've not made one yet, so im unsure lol
gotcha, i'll just wait until some guides/other come out for the other stuff about it! thanks for the helps
@drowsy nacelle Generally setting the priority to be higher doesn't help much. And, is it safe to overclock my CPU?
I have this fear that I might burn my laptop lol
I've obliterated myself on monsoon a lot and beat the game but i haven't unlocked any of the skins, has anyone else had this issue or have a fix?
Uh, I have a feeling that my CPU is a little too hot
@regal plover I have precisely the problem you are having: core clock speeds periodically tanking causing frequent fps drop spikes which pretty consistently result in death 😆 Anyone have a rundown on what throttling is and ways to manage it for the tech illiterate? ❤️
@regal plover I have precisely the problem you are having: core clock speeds periodically tanking causing frequent fps drop spikes which pretty consistently result in death 😆 Anyone have a rundown on what throttling is and ways to manage it for the tech illiterate? ❤️
@true sinew Oh god, I'm happy it isn't my crappy pc the fault of these issues
I'll try to clean up a little bit of dust here, and see if anything works. Even tho, this clock speed inconsistency wasn't here before the update, I'm not sure what's happening to make the clock speeds crazy
nevermind im stupid
@regal plover hey look I'm not claiming for a second that I'm ruling out my pc being crap 😆 but yes I agree something has happened in the last 5 days which has taken the game from a v fun time to highly frustrating 😦
Let me know if the clean helps significantly and I'll do the same ❤️
I really need to do some maintance on this little guy
I'm pretty sure these max temps aren't something very common lol
that does seem hot yeah hmm
Just 5 more degrees and I'll have my own handcrafted water boiler
Just wondering if this is the right place to post about a corrupt save? I played right before 1.0 with my old save, many characters and items unlocked... I updated to 1.0 and launched it for the first time today; being prompted to make a new profile. I have isolated my new save and tried loading my old one, being told that the save was corrupted. Is there any way I can get my save data back?
Hopefully we can actually fix the dedicated server, sooner than later
@regal plover tentatively seem to have fixed mine
as Ghor mentioned, the fps drops may have been a result of throttling, after looking into it and a bit of research it turns out windows was doing some shady power saving shenanigans behind my back
How did you fixed it?
I tried cleaning up my laptop, but without a proper screw driver, I won't be able to do much
I removed some dust tho
dont know why it was suddenly an issue this patch but after I go into advanced power settings, theres a parameter called minimum processor rate
for some reason mine was set to 5% which is obviously not ideal
so id say go in here and confirm those guys are at 100%, but beyond that I got nothing: the temp of your pc is a separate worry id say
huge thanks to @mild ridge for pointing out that potential issue, very keen to get stuck into the new stuff ❤️
Hmmmmm very interesting
Hmmmm, odd enough
I don't think it will change anything, since what's on 5% was the option while on battery, and I'm always playing with my laptop plugged in
It didn't changed much to be fair
Now I have no idea on what to do, welp. Best solution would be finally getting a better setup
does anyone else have trouble trying to play a private game with friends?
So i installed a share items mod and a item/stat descriptions mod and so did my friend, but i cant shift tab to open steam, but he can... any ideas?
my game patched today and crashes nonstop. ryzen 3800x, 1070ti, win10 2004. anyone have any ideas?
every other game seems fine and doesnt crash
i have no idea where the ROR2 log file is but heres what I get in event viewer:
Faulting application name: Risk of Rain 2.exe, version: 2018.4.16.59850, time stamp: 0x5e2986d7
Faulting module name: UnityPlayer.dll, version: 2018.4.16.59850, time stamp: 0x5e29871c
Exception code: 0xc0000005
Fault offset: 0x00000000001a7943
Faulting process id: 0x2254
Faulting application start time: 0x01d671d84d57098d
Faulting application path: Z:\SteamLibrary\steamapps\common\Risk of Rain 2\Risk of Rain 2.exe
Faulting module path: Z:\SteamLibrary\steamapps\common\Risk of Rain 2\UnityPlayer.dll
Report Id: 61f7cf3f-4f56-4618-adb9-a49022f58910
Faulting package full name:
Faulting package-relative application ID:
?files
@heavy apex,
Output Logs
While the game is running, it is continually writing to a file called output_log.txt. This file can help us get more information about the issue. If possible, please upload the file here. The file is usually located at:
C:\Users\<UserName>\AppData\LocalLow\Hopoo Games, LLC\Risk of Rain 2\output_log.txt
Crash Dumps
If the game crashes it will generate a Dump file. Similarly to output_log.txt, it can help us track down the source of the crash. Please upload your crash dumps here if possible. The file is usually located at either:
C:\Users\<UserName>\AppData\Local\Temp\Hopoo Games, LLC\Risk of Rain 2\Crashes\crash.dmp
or
C:\Users\<UserName>\AppData\LocalLow\Hopoo Games, LLC\Risk of Rain 2\Crashes\crash.dmp
Any dedicated server fixes? saw several servers are working.
@heavy apex have you overclocked you gpu?
Nope, RAM and CPU are overclocked but have been verified stable for months.
ok nvm
bringing it down worked well for me but i guess there's a different issue
try updating directx and gpu drivers
It's something with the new patch. Game ran flawlessly for like 6 hours yesterday and crashes every 15 min today after applying the patch
@heavy apex the hotfix was a very very light touch. we only changed the NPC navigation data for the final stage and added a maximum cap to the doll equipment
I'd suggest that you try disabling your RAM overclock anyway and see if that improves stability. Even if the overclock seems stable in other applications something about this version of Unity we built the game on doesn't like it
Weird.
It literally passes a 24 hour memtest
But yeah that's cool, I'll give that a go
I'll do a reinstall as well, maybe a file is frigged somewhere.
For some reason I cant change my video resolution settings. Anytime i change them from 60hz to 144, hit apply and then accept, and then do anything else ... everytime i return it is back to 60hz default settings. Is there something else I need to do in order to fix this bug?
To add to this, I'm currently experiencing the same crash/error related to the UnityPlayer.dll that @heavy apex is reporting, but for me it's been happening for about a month now. I just reinstalled windows/reinstalled the game and I'm still seeing the same behavior. Attached are the crash dumps for 3 crashes that all occurred within a 20 minute window when attempting to play.
@karmic lynx C:\Program Files (x86)\Steam\steamapps\common\Risk of Rain 2\Risk of Rain 2_Data\Config edit with notepad fps_max 60; set to fps_max 144; save and place read only tag to this file.
@karmic lynx more fps means - more garbage collection - means more stutter. 60fps is preferable.
Is there a guide to setting up a dedicated server now with the 1.0 update? The old ways no longer work so I was curious.
Have they fixed the server browser yet so the don't show started games filter actually works?
@potent forge not yet. Filter does nothing.
Blargh back to waiting I guess, I'm too lazy to match up with people through discord :(
server browser just doesnt show any servers
dont know why it was suddenly an issue this patch but after I go into advanced power settings, theres a parameter called minimum processor rate
@true sinew
This fixed my frame issues!! Thank you so much. I'm guessing this was only happening to laptop users. Makes sense because my friends weren't getting this issue. Thanks to Ghor, too
Are there console commands for the dedicated server?
Hey, I really want to love this game but I keep getting crashes. Either the game crashes, blue screens my comp, or just freezes with a drowning screech sound to the point I have to hard reboot my comp. I play plenty of other games that I assume are more demanding on my system.
output
Any idea what is causing the issue?
I have below 60 fps while in main menu and ingame. I have nvidia gtx1060 graphics card and i5 processor with 12gb ram. Any fix?
@marsh zenith i think its just a universal thing that the menus and title have weird fps
So its normal to other players?
@drowsy nacelle
am i aable to possibly get in touch with a <@&559786374228738069> about an issue that can possibly relay an issue in regards to the multiplayer for the 1.0 patch???
Hey, we're not tech support, I'm sorry
@true sinew
This fixed my frame issues!! Thank you so much. I'm guessing this was only happening to laptop users. Makes sense because my friends weren't getting this issue. Thanks to Ghor, too
@grizzled verge yea look it sort of fixed for a little bit but im not toally convinced yet, but im glad it helped!
@vestal berry then is it possible to relay the info to devs??
If it's a bug, it can go in #ror2-bug-reports-console #ror2-bug-reports-pc
@grizzled verge @regal plover yeah pretty much concluded that my problems this patch are due to a combination of the sneaky windows power saving business and high cpu temp, so not sure why this patch is suddenly running so hot but its just a matter of better fans or ventilation <3
I'm just waiting to see something on massive lag in multiplayer. Not a FPS issue, it just suddenly craps itself when playing.
are there any known issues about the game just "freezing" after a certain point?
I was doing a stage 20 run to unlock Commando's alternate ability and kept going after passing stage 20, and now trying to load into 24 I just get a black screen
it seems I can pause/unpause, but I just see in the background the last stage where I just teleported from
I'm unable to change my refresh rate from 144hz to 60hz. Every time I change it and hit apply settings, it reverts back to 144hz the next time i open it.
I play on an Acer Predator laptop which does have a 144hz screen, but I suffer from massive framerate issues as soon as i reach monsoon stage 2-3, so I've been trying to fix that. Any solutions?
@marsh zenith disable vsync from game and nvidia control panel, set performance in power setting there too.
thank you. Ill test it more but it seems even though the file says 60fps, the in game menu still says 144
is there any known computer crashing issues on the new patch? The game kills my comp every time
ill have to measure it personally after the fact, but it shows 144hz while I have it set to 60, but it never jumps above 60 fps while testing for the 10 minutes or so that ive tested it
so idk if its working properly or not. I have to wait until I get to stage 3 or 4.
which i wont test tonight. I work in about 8 hours so I dont wanna stay up testing.
anyone know how to start these 16 people servers?
I need help, one of my friend is having this problem. It just stucks at this screen. He can't select any characters. He tried many possible solutions read on the internet (reinstall the game, run as admin, disable firewall,forward port) It seems doesn't matter who create the game, it always happens. Pls helpp.. I can't play with my homie
My friend is having a problem where the audio cuts in and out in random intervals. Has anyone had this happen to them?
@tranquil tiger only ingame audio, not any audio? Make him play some music during the game.
I need help, one of my friend is having this problem. It just stucks at this screen. He can't select any characters. He tried many possible solutions read on the internet (reinstall the game, run as admin, disable firewall,forward port) It seems doesn't matter who create the game, it always happens. Pls helpp.. I can't play with my homie
@fleet crescent
Verify The Game data?
@brave hearth this is connectivity issue.
After two days steam found an broken file in steamwork after that it works soooo
I had the same issue
@brave hearth same thing:
reinstall the game
likely this is the connectivity issue. It could be steam token error too.
restarting steam helps in this case.
I can only talk about what helped me. And this was after the patch verify the game data found a broken file and after that it works find
@brave hearth I never seen someone with this particular issue that was able to fix it with integrity check. Its very unlikely that the part of dll responsible for multiplayer gets broken in such a way that it allows connection, but blocks data from host to client and vice versa.
However this is the typical picture whenver someone have firewall up, or ports needed for the game are closed.
Also same thing happens when steam failed to refresh its token for the user.
But i dont say that it isnt possible, it never hurts to check on file integrity.
Btw i cant unsee your discord avatar as this meme i made long ago lul.
Still having FPS issues since 1.0 here. Settings make no difference. Random lurches down to around 20-30 fps for quite a long time, with little correlation to action on screen. Can usually go at least a loop before noticing any dips, even then, these were reserved to boss fights etc. Definitely related to the 1.0 update.
i7 6700HQ, 970M 3GB, 16GB DDR4
Hitting Q doesn't do anything. Game wont let me use my equipment
but it's specifically the doll
everything else is fine
started working once i switched stages
@whole aspen there is a cap for 3 active dolls
there were zero when it was broke
@whole aspen i see a correlation here.. dont you :D?
No... I don't actually. There were zero active dolls, and it refused to let me use the item
If you're asking if i can imagine what the glitch is connected to, then yea. I can see how this glitch might appear if the number tracking gets bugged.
but this isn't my error lol, there were zero active dolls
@whole aspen got a closer look, it appears you have 19 dolls and 18 fuell cells. That's means you have 0 active dolls. Right?
That's... what I'm saying
I see, unknown what happened here. Check that on next stage.
Mention me with @steady topaz ill check that particular build later. Its possible that there is some kind of unknown before issue.
I mean i can only assume that for some reason, the tracking number/code had a slipup
it righted itself on the next stage
Ushually those kinds of errors begin to pile up and game crashes.
if some of your skills, or enemys start to use abilitys without cooldown - that's where game comes close to a crash.
66umm4jppm667
This game is still bluescreening my computer.
I have tried:
-Updating my graphics driver
-Running Steam as administrator
-Running game as administrator
-Disabling my antivirus
-Verify the integrity of game files
-Running the game in compatibility mode for windows 7 and windows 8
-Running the game on the highest graphics settings, medium settings, and the lowest.
-reinstalling ROR2
I am on windows 10
Graphics card: NVidia RTX2060
Intel I5-9600k @ 3.70 ghz (6 cpus)
16 GB ram
Any advice at all?
@keen axle what windows event manager have before the reboot? Search for critical error and then make your way back issue by issue. Google the error code for something standing off.
Check that your cpu core speeds isnt going up and down during gameplay or before crash happens. Use cpu-z for that.
I assume the game is capped to 30 fps on Xbox one x with vsync because of higher detailed graphics. Looking at the sky gives 60 fps at times. Is there any official word on when that would be addressed because it surely didn't bring the Xbox one x up to 60 like virtually every other console version.
@orchid flame, We have two known solutions for the topic 'no gamepad binding'. Would you like to view them? (Y/N)
y
@orchid flame,
This issue occurs when Windows is reporting a gamepad, joystick, or other input device providing a non-neutral input. This is usually caused by:
- Having a gamepad, flight stick, HOTAS, pedal, racing wheel, or any other kind of non-keyboard/non-mouse input device plugged in. Simply unplug the device from your computer.
- Having vjoy installed. If you've ever tried to use a GameCube controller with your PC, you probably have it installed. Opening your computer's Device Manager window should allow you to disable or uninstall it.
at least you can play the game
Chipping in on @whole aspen 's issue @steady topaz , Had it happen to me as well while I was killing final boss. Noticed it wouldn't drop any dolls anymore with the gesture + doll + fuel cell combo
not really a tech support question exactly, but anyone know what the achievement for beating mithrix on monsoon is called in the game files? I just beat him but got screwed by a void reaver right after and REALLY dont want to redo that run
hoi. time to time playing ror2 shutting down my computer. everything freezing, then screen go black and it stops working. any info how to stop this?
how to set up ror2 dedicated server?
@steady topaz hello about the Direct connection what is this activate console part ?
Why do i have 140 fps in game even though I put the lock to 60?
It's making my gpu go crazy
@frosty fable Can't you set the refresh rate when selecting resolution? If so, just set it to 60hz and enable vsync
Ill try doing that
Issue again with multiplayer The Host has a stable movement while other players is always in delay vice versa
what i need to do to fix this
Hm...ridiculously weird behavior with steam now.
Fixed the issue with RoR2 not launching the other day, thought everything was fine. Did nothing else to steam during the inbetween and now no steam game can launch.
anyone having this issue?
@twin star #ror2-tech-support message
@long swallow you need to press 3 keys at same time.``+ctrl+alt the [] key should be under escape. It could be other key on your keyboard layout, just hold ctrl and alt and press some keys.
Hey i need help with launching the game.
@steady topaz question when i host (vice versa) a game im fine but the other players are delayed
do you know what cause this
More info were just in the same City but different net Provider
@long swallow If you open the console when you're connected to someone's lobby you can type ping command. It returns the delay between sending data to host and reciving it back to you in miliseconds. Looks like this: rtt=150
The lower the nember - the better. If you trying to connect to someone across the world it ushually way bigger. And for some connections its so long to the point of 5 real time seconds to bounce data there and here.
There is also alot more little things that increase the delay. Faulty hardware, provider network load, etc.
But most common issue - that someone from your group (you, or your friend) is unable to use steam server or does so with a relay and this adds a ton od delay to the path of data.
If you're using direct connection you avoid steam entirely, its one-two steps shorter path and in general should work. But as it always is.. there is another issue. And its NAT, basically your provider gives you dynamic ip and the number of such ips is limited so they use ports with that. And if ports are closed (game uses 7777 for direct connection) data get lost and you get a delay. Sometimes you cant even connect, sometimes you can connect, but its lags.
Try to use lan emulation with radmin, it creates its own virtual netvork adapter and able to change setting in it automatically. It will connect same way as direct one, but with one more step - radmin relay. It mostly stable.
For now it seems this is the best workaraund. Devs gonna test networking with recent debug feature addition and will try to fix this issue. But mostly this comes from closed ports and firewals.
Thank you for your knowledge they should really Pin you solution
i believe it's because its peak hours as well, i have two friends halfway across the globe and we played fine during low traffic hours. it has just started peaking atm and it was extremely bad.
My W key has been getting stuck while playing ror2 today, making it so that i keep walking forward.
It doesnt constantly happen, but when it does, it's obviously quite annoying (just made me walk directly into a boss imp's melee attack and it killed me)
My W key doesnt get stuck outside of ror2
Anyone know how to fix this?
@upbeat haven you have some input controller with non 0 axis that game picks up. Or you have vjoy installed. Remove the controllers or uninstall vjoy.
Ah yea i do have vjoy
I'll try disabling it
@upbeat haven disabling from device manager should work too.
Thing is, yesterday i also played
And then it wasnt happening
I'll try that
@steady topaz
Vjoy was already disabled
@upbeat haven Do you have something like wireless input devices plugged in? Or hotas/wheel?
All i have plugged in is a logitech gaming mouse
@upbeat haven hm, its a known issue with vjoy and so far i didnt see people having problems when its disabled in device manager. But maybe in your case you need to uninstall it? try to disable it and reboot your pc 1st.
Yea i just rebooted
But i'll see if the problem is still there
It wasnt a problem yesterday, and i dont think i changed anything since then
It still happens
It takes a while before my character stops running after i let go of W
The longer i had W held down, the longer it takes to stop moving forward
As if the W input is being cued somehow
so, my friend bought the game and whenever we try and play together he is unable to pick a character or anything in the menu screen.
here is his screen https://cdn.discordapp.com/attachments/274718259637649408/743854431870910464/unknown.png
and when i try to ready up, the button straight doesnt work
@upbeat haven huh, that's wierd. It is not similar to non0 input device at all.
Check that you doesnt have anything like sticky keys on. Maybe some software that does that.
@rustic sluice
Read this pls (discord may take you to the wrong message, if so click the link again. Both messages by me.)
1)https://discordapp.com/channels/417739215355510784/559902278018924557/743840150190161981
2)https://discordapp.com/channels/417739215355510784/559902278018924557/724218038651453511
hm. sticky keys is disabled
@upbeat haven sorry, but i have no idea what this might be. Never had something like that before. :|
maybe try running the game in window and pop a virtual keyboard from windows and press W there. If it still acts like that - its probb not your keyboard fault.
@upbeat haven For me it does
keyboard meant to be on top layer. Hold tab while ingame to plop in the mouse coursour and press the keyboard key with it
i'll try again
right, i got the on-screen keyboard to work
and the problem does not persist
As far as i know there is different types of input for windows. I can get you the exe file that i make with AHK, its autoit scripting tool. It can send different inputs of same key into windows for you. But i dont think that would be helpfull 😐
Virtual keyboard might have raw input, that is not affected by other software - what i meant to say.
i changed some of my keyboard settings to see if that helps
Hello guys, I successfully dedicate the game server, but seems like I cannot connect into server via in game serverlist.
this is the client's log while trying to connect into server.
but, I can connect into server via in game commandline, or via Steam's server list... weird. 👀
- The server did show up in game serverlist.
i messed around with "repeat rate" and "repeat delay" and it made the problem less bad, but didnt make it go away entirely
@quick vigil can you teach me how to setup dedicated server please?
I keep getting FPS issues at any moment of the game (Stage 1 forwards)
When nothing is happening it usually runs the 60 FPS cap I set, but doesn't take much time the FPS to go around 20-40, and sometimes lock in 20-24 for some seconds, just to go back to the 20-40 part...
My specs are definitely enough for the game according to the recommended specs list
I think these issues were happening before 1.0
everytime i play my GPU usage instanly goes to 95-100%, not sure if that's normal for a game like Risk of Rain on stage 1 (or even character select sometimes)
anyone know what the deal with these flashing colors in the menus is
just started happening after this update
@feral stump I follow this step and get it work.
@nocturne rapids other games have this issue?
@nocturne rapids do you check your fps limitation in settings? it is 60 fps in default.
my game crashes when i launch it
it used to be on 120 but i put it on 60, i don't think there was much difference
@next helm rtx gpu?
@nocturne rapids so, were you able to play without this issue before? What gpu/cpu?
uhh where do i check that
I think i had this issue for quite the time, but i weren't playing Risk of Rain 2 that much before 1.0
Maybe it got worse after the Launch
my CPU is a Intel Core i7 7700 HQ
and my Graphics Card is a GTX 1050 Ti
I have 16 GB of Ram
Just tested using 120 FPS Cap, the game runs around 110, but starts going to 70, then the 25-35 thing again, as i.. walk
@nocturne rapids check that you have latest gpu drivers. Game set to disabled vsync. Go to your nvidia control panel, disable vsync aswell and set performance in power management.
Already did all that, Nvidea drivers are up to date, vsync off, already made sure it's using the right graphic card in the Graphic Settings
I need to go for a few mins so feel free to help the 100 Cells guy
@nocturne rapids i am like tearing between 3 different convo, its alraight.
Try disabling XMP memory profile from bios, see if this helps with performance.
hmm not sure how to do that but i'll look
are connection issues considered a bug or tech support
@tawny apex This is the right place, what is your issue, tell me more about what you trying to do and what you get.
i can't connect or have others connect to my game. i join for about 1 sec and then get booted to the title screen. i've done this with friends and random people. i've tried verifying files and reinstalling
i can join the lobby but when we go to character select i connect for a sec and then bam, title screen
@tawny apex other p2p games are fine with same people involved?
yes
Has anyone made progress on the FPS issues w/ 1.0? I played a lot of ror2 before the patch (100+ hours), my FPS is always 160+ except in rare large fights, but with 1.0 it drops to about half of that all the time 😦
well to be fair all other multiplayer games i play are fine not sure if they are p2p
and the first day i had the game i connected with a friend for a few hours
but since then nothing
@tawny apex run the game again, exit if its running right now and rerun it. Go to any multiplayer lobby and try to connect to them. Wait till the issue happens again and drop me this file after you close the game. Do not rerun it again untill you get this file here.C:\Users\USERNAME\AppData\LocalLow\Hopoo Games, LLC\Risk of Rain 2\output_log.txt
anyone else know why i got this in the middle of a run?
Seriously, is there any point to posting in these channels? It all seems community driven troubleshooting. Like. I'm having a serious problem with my corrupt save. I'm seeing many others having my same problem. And I have the serious feeling like I'm not being heard.
Does a guy really have to make a social media account to send the devs a message they may read?
there are 3 devs bro, they mostly work on the game. ghor was kind enough to spend some time yesterday helping me and some others. Your best option is to search the steam forums.
not sure if this is the right channel but i was wondering if split screen multiplayer was available for pc.
nope
console command is there, but it isn't active.
meaning sometime later it might be added
Hi, people a question to make servers in windows from steam not working? only Linux?
@rigid burrow i got that upon launching the game, no fix yet
I have no idea why people all showing unknown
@rigid burrow likely you have XMP profile set in bios for auto. This known to cause that random crash issue. Google your motherboard with how to disable XMP profile.
@silent yacht ^check that too.
@steady topaz WTF is XMP??? the issue started after i updated drivers can still lag on intergrated but i prefer 60+fps (also laptop)
so i did the lunar coin thing and this happend so i set the coin value to my original number and its still like this
@silk pulsar you removed some needed characters or saved it in the wrong format. That's why you dont do this kind of stuff.. and if you are, you make a backup copy and edit this copy instead.
@silent yacht You're having random crashes, crash on startup or performance issue?
So how would i reset it to its origin state
@steady topaz its crashes everytime i start on my graphics card (gtx 1050 which is more than enough to handle ror2)
@silent yacht Sorry for the log waits. This started happening when you installed new drivers? Try reverting it.
Also XMP - its a system of pofile settings that affect your RAM performance. Enabling XMP profile is known to crash this game. Its recommended to turn it to disabled from your bios.
You have to google how to do so for your particular motherboard.
Dev about that:
1)
https://discordapp.com/channels/417739215355510784/559902278018924557/743561764016488540
2)
https://discordapp.com/channels/417739215355510784/559902278018924557/743566762196598938
3)
https://discordapp.com/channels/417739215355510784/559902278018924557/703048293214715927
@silk pulsar Its hard to tell, since we have no idea how badly you massacred the file :|
You can create new profile and paste your corrupted profile data into it and then save it with ctrl+s (This just saves changes to the content of the file, and doesnt change the format)
This would help, if you didnt remove some characters that you wasnt supposed to.
ok ty goo i just had no idea how i corrupted it all i touched was the number 2 inbetween coins
@brave hearth Have you tried to:
- restart steam
- check for integrity of game files with steam
- use direct connection
- use raminVPN
?
radmin VPN ?
Anyone know when R2API is expected to be updated? :(
I'm sure this has already been answered but I'm having trouble figuring out how to solve the problem
all my keys are unbound
@brave hearth i think i already have sent you this link before
https://discordapp.com/channels/417739215355510784/559902278018924557/724218038651453511
@steady topaz I use NordVPN and it works now
!no gamepad binding
@steady topaz, We have two known solutions for the topic 'no gamepad binding'. Would you like to view them? (Y/N)
y
@steady topaz,
This issue occurs when Windows is reporting a gamepad, joystick, or other input device providing a non-neutral input. This is usually caused by:
- Having a gamepad, flight stick, HOTAS, pedal, racing wheel, or any other kind of non-keyboard/non-mouse input device plugged in. Simply unplug the device from your computer.
- Having vjoy installed. If you've ever tried to use a GameCube controller with your PC, you probably have it installed. Opening your computer's Device Manager window should allow you to disable or uninstall it.
@tidal raft Check if this helps ⬆️
so where do I look to uninstall vjoy?
If you didnt remember installing it - it should not be installed.
Check in device manager if you have controller with this name.
are you talking the control panel?
cause I don't see anything that just says "vjoy" on the device manager
found it
okay now I'm real confused
cause it says that the drivers are disabled?
do I have to uninstall them?
Try to uninstall it, i am not very familiar with this software, but its known to wierd out the controls.
Vjoy was already disabled
@upbeat haven Try to uninstall it, it seems to cause issues even if its disabled.
hey ever since i got this game a few months ago multiplayer has never worked for me and my friends
we can't press "Ready"
what can i do?
@steady topaz is that a common issue?
@steady topaz thanks, i'll try that next
@main peak depends on how you look at it.
Its not a game fault. But devs do work on it.
I made you look at workarounds, but most likely the problem is on your side in the networking.
I experience a weird texture resolution problem. When I set texture resolution all the way to low, I get 10-14 frames in main menu. Plus it's slow as hell to move cursor around. But when I amp up the texture resolution to full, my cursor moves real fast and get 20-28 frames on main menu. Anyone got an idea how this is even possible?
@steady topaz i forwarded the ports but it doesn't work, i tried connecting directly but it doesn't work either
we can join lobbies but pressing the green "Ready" button doesn't do anything
Trying to play the game today, the splash screen doesn't render and the game crashes at the main menu. Event Viewer shows a 0xc0000005 exception. I've tried reinstalling the game and vc++ redistributables.
anyone know how to fix??
@sonic dock that's alot of desync there mate. Its a connection issue. There is workarounds, but in general - it is how it is for now.
but it does that when u hit certain areas its netcode related not connection related
we need an unstuck console command
@sonic dock its combination of both.
Devs arent chaniged anything in how theyr game works with network stuff. But something clearly went wrong. So they are investigating. 1.0 update had new debug feature and so they are working on it.
In the mean time you can use some workarounds to avoid that.
https://discordapp.com/channels/417739215355510784/559902278018924557/724218038651453511
No easy and good solution for now.
Anyone have any idea why this happens when I try to join a multiplayer lobby?
I cant select anything or do anything.
Read which is above @umbral wing for now its the only solution besides restarting your steam clients
Any solutrion for this unity 2018.4.16f e6e9ca02b32a ?
@orchid flame crash is random or on startup?
startup
@orchid flame rtx gpu?
@orchid flame try:
disabling XMP memory profile from your bios.
reverting for older gpu driver.
I know none of other solutions, many people who it didnt help at all.
everytime i join multiplayer
i can select a personbut then i automatically specatate
why cant i play multiplayer
Huuum I have a big problem : my mouse doesn't work in game : in the tittle screen and all it works, but when i start a game, It's impossible to move it. I can't aim at all. It's been like that for months i stopped playing RoR2 cause of that.
I think one of my files is corrupted. But I tried everything : restore files, restart, uninstall and reinstall 3 times. Countless PC restarts, none worked. I wasted a lot of time of this. I reported this already but nobody responded.
Does anyone can help me on this ??? I really want to play the game... :('
(hmu please)
@glad sequoia wheel/hotas plugged in?
Because people are already ingame @pallid frigate
You need to join when at lobby and not full
@steady topaz nope
Not the case. @orchid flame
@pallid frigate picks a character as everyone else do and then they start, but @pallid frigate doesnt spawn and sees spec camera.
As i already said, its likely because of bad connection.
Did you check on ping with the console (``+ctrl+alt) command ping` ?What was the result?
Also, while i pause in game, the mouse works, it's really when i play
@glad sequoia it istnwireless or some fancy gaming one? Also what about other controllers?
@steady topaz no it's a wired mouse Spirit of Gamer with just 2 extra boutons (that's works perfectly in game)
I don't have other controllers, only mouse and keyboard
@glad sequoia any chance you have vjoy installed? Check if you have input device by that name in device manager from control panel.
@steady topaz no i don't have it
@glad sequoia Find file with symbols like 54620616-0351-4y6f-a51d-127c2b6bb498.xml
By this path
C:\Program Files (x86)\Steam\userdata\YOUR STEAM ID\632360\remote\UserProfiles
Remove this file to another folder, away from game files (On your desctop for example). Its your game save.
Then run the game and check if the mouse acting up still.
okay on it
You can check on your steam id from your steam invite page, or just navigate the path yourself. If you have no other steam profiles, there should be only one.
@steady topaz yes, Either 2 things happen.
I was just able to join a game now, but i wasnt able to select who i wanted to play.... which was weired.. OR I just join in and can select who I want but then when it starts i automatically spectate. when i type"Ping" it reads like this rtt=110ms smoothedFrame=0.1100661 smoothedFixed=0.1102496
@steady topaz done, nothing changed (i still had all my items, and characters and etc, i dunno if that's normal)
So I paused my run and locked down my pc to not loose it whilst i was gone and when i got back the game crashed, as soon as I restarted the game though it runs at like 1 fps, before 1.0 i could just reinstall the game and it would be completely fine but now i tried the exact same thing and it will still run at a terrible performance. Is there any way to fix that issue now?
@pallid frigate hm that's a good ping. But i had same issues with connection to hosts from China. Not shure what you can do about that. But if you're hosting things still stay like that?
@glad sequoia oh yeah, there is a steam cloud save, you might need to disable it for this particular test.
It also doesn't make sense that when I create a lobby, it doesn't let me select the option for more than 4 players.
And when i refresh the lobby page a TON of them pop up, but the "games started" option seems to be irrelevant as over half have already started regardless if thats selcted or not.
ok i'll try that
@floral narwhal sorry that wasnt mean for you.
before this patch, players would join randomly and it worked fine, now i just cant play.
oh well i'll still just try it
@pallid frigate game is meant to be played with 4 people. More than that currently hosted by dedicated servers. And the lobby manager currently bugged. All those isnt related to you.
@pallid frigate can you host the game for others, is that what i asking. I mean like now, after all thise changes to the game?
When I host, i will sit in lobby(public) and no one joins. I have only sat for like 10-15 minutes before exiting because i don't think this is working proprly at all.
i've uninstalled and redownloaded the game as well.
@pallid frigate try to host a game now, @steady topaz me the host name when you're set. Ill check if i can find it.
@floral narwhal That's very wierd. Is it a laptop?
@floral narwhal plug in the charging cord and see if its better. Some people have reported that latest hotfix changed theyr power/performance setting and cpu now is on 5% whenever laptop isnt charging.
i tries restarting and i'll see if it works
@steady topaz I just posted oen as Testing 213
it's always plugged
i got another theroy i'll test if it still won't work
otherwise i blame unity
@floral narwhal download and install cpu-z and check that your core speed isnt super low or goes up and down when you run the game.
restarting fixed it but still thanks, my ither theory would've been that windows 10 decided to try and switch graphics cards between the locking and that's what broke everything
@steady topaz i ran the test successfully : my mouse works, i had to create another profile !
so going from this there is an error in my game save... :c
oh, and another game save file loaded to replace my corrupted one
@glad sequoia you dont have to create new one, pm me both old one and new, ill edit it together to default settings.
anyone else experiencing unity errors with the new update? like 20 mins into a run the game crashes to desktop saying this in the crash report UnityPlayer.dll caused an Access Violation (0xc0000005)
@fluid sundial rtx gpu?
got it ty so much bud
@floral narwhal this could be the issue, you can check what gpu game uses with its logfile. You will find log here: C:\Users\USERNAME\AppData\LocalLow\Hopoo Games, LLC\Risk of Rain 2\output_log.txt
If that was the case, then good. Its a easy fix.
@steady topaz yeah its a geoforce rtx 2070 super
hi guys can anyone help i just bought the game i cant open it it give the black coding screen
@fluid sundial That's an F, i am sorry, but i dont know how to solve the issue for those gpu. Its kinda wierd case with them. Plenty of people who have this issue and some people who have very same gpus, but without any issues at all. Devs think that its wierd driver/hardware interaction that cause it.
I suggested to revert drivers, but havent heard of succesfull solution yet.
There is also a slim chance that its XMP memory profile that makes the game crash. Disable it from your BIOS to test that. You will have to google how to for your particulr motherboard.
hmm i see
i cant get past this how to fix pls
do i need to disable gpu then re enable ?
fixed
Hello! I've booted up the game and every textbox says "no gamepad found" ...I can't input anything besides enter and escape!
Is the server fixed now?
I tried verifying the game cache, to no avail
So right now, my game save, my profile is corrupted and it forces me to make a new one and I have all my stuff on the old which i spent at least 200 hours on. How do I get my files back?
is it not possible to run a dedicated server and a game client on the same machine? it gives a bunch of network errors when trying to connect, then eventually times out.
https://gyazo.com/e2c7b4d8f2eab1d116b6bdf5bc657ddd
So I made a big oopsie.
I know the file specifically says not to edit it at all, but to be honest I was trying to break the max player count to play with 8 people and it seems I went about it in the worst way.
I editted server_startup
Now it seems no multiplayer works at all, even normal multiplayer
I have tried verifying the integrity of the game files as well as uninstalling/reinstalling
so now I am not sure what to do next to attempt to fix.
I dont mind losing all achievements and whatnot either, that's not a concern.
is there a way to recover a run if your game crashes?
@vital palm delete the server_startup config file and reverify also i'd recommend making a autoexec.cfg file instead for loading custom config commands!
got it! thanks
i am going to scream
@feral pine looks like an issue with either graphics drivers or DirectX. Do you have the latest drivers installed?
Does anyone have any idea why some runs have a 2-5 second lag delay that's not related to ISPs?
I am also having an issue where the game freezes for about 1-2 seconds throughout the whole game session. Updated video drivers, reinstalled game. lowered graphic settings. No solution yet.
^ Yeah, it's like a latency delay that causes abilities to react slower, and prevent you from actually dealing damage to the enemies, yeah?
I have my settings high, and my friend as everything at the lowest possible, and still she's having issues, and i do as well sometimes.
I'm not sure where to put this in so I'm putting it here. I bought a digital copy of the game on Xbox One for my friend but I'm in Canada and he's in US. When he received the game, it said he couldn't play it because of different versions/regions. Is there a way for him to convert the copy he has to one that works with his region?
Whenever I try to join a game I get this issue with my game.
Any ideas on what the issue could be?
https://puu.sh/GhI6q/e562374249.png
@orchid flame you will probably need to create a ticket for something like that. Although I'm not sure if they can even fix it, but worth giving it a try! You can create a ticket here: https://gearboxsoftware.zendesk.com/hc/en-us/categories/360001615171-Risk-of-Rain-2
Quick question, is there something special i need in server_startup for the dedicated server to get it to show up in the lobby browser?
We were all able to connect directly to it by IP but it wouldn't show up in the client, not sure if there's some setting i was missing
Okay thanks
is there any launch option available to skip the intro movie?
anyone know why it looks like this?
my internet shuts off when i launch the game
discord shows my ping jump to like 5000ms
pro controller is having issue with directional input. seems to always be pointing down? whats up with that
I don't know why, some of players ID show up [Unknown], some of them are fine.
https://i.imgur.com/sJeNTEp.png
@supple tundra in graphic setting enable soft bloom it doesnt cause any additional lag anyway or soft particles i forget what its called
Anyone else having issues with multiplayer since release? The game is running significantly worse for everyone but the host when playing with more than one other person.
My game slows to an absolute crawl, freezing multiple times when I try entering the multiplayer menu
This only started happening today
I literally changed nothing since yesterday
Welp, I give up on this game. I have spent hours trying every percievable fix and it still crashes my whole comp within 5-10 minutes of gameplay. I can run all sorts of high end games, but this just kills my comp.
Thanks to those that offered advice
the game won't launch after the 1.0 update
it sounds like the devs screwed the game with the 1.0 update by the sounds of it
Hello,
I just wanted to post back in here with an update to my crashing issue involving RoR2 and the UnityPlayer.dll. I posted yesterday about 8pm and I think I found the root cause of the issue.
So it turns out that my motherboard was overclocking my RAM at the BIOS level without me knowing it. Once I disabled the XMP profile that was being applied, my system was much more stable and I've been able to play about 2 hours know without experiencing a crash, when previously I couldn't play anymore than 5-20min at a time.
Hopefully this information will help someone else as well.
Cheers.
Is this the correct channel to as about the dedicated server? I seem to have issue with discovery. I can connect manually through the game console, ports have been forwarded, but it doesn't come up in server list. Equally, if I try to see the server through the Steam servers menu, pinging it results in wrong connectionId in received user packet. Is there some extra setting I'd need to change for discovery to work properly?
I have the problem since the new patch that whenever I play multiplayer either everyone other than me lags/desync if I am host, or I lag/desync if anyone else hosts. This was never an issue before the patch and was wondering if anyone else was dealing with this sort of issue as well
Anyone have ideas? I've factory reset my pc, completely uninstalled/reinstalled, tried dif DNS servers, verified internet is fine. Still unable to play multiplayer. When attempting to join a game i am unable to select a character, and it then kicks me back to the main menu. If i host, the same thing happens for whomever joins. Couldn't find any solutions on the internet.
No vpn. Speed test nets 150Mbps down, and 8Mbps Up
No issues on any other games. No packet loss, no ping spikes.
this is what it looks like when i join a MP game
this is what it looks like when i join a MP game
@silver kindle I'm having this same problem and haven't been able to find a solution for days. I think it's network related but can't pinpoint what exactly.
@quiet steeple the game was working fine up until about 8 hours ago, i got kicked from stage 4 when playing with friends, and haven't been able to play since. i'm not honestly sure its network related.
uh boys, whenever I go to launch my game I get this other popup appearing as Risk of Rain 2 - Unity 2018.3.14f1_d0e9f15437b1 then it closes and the game closes
I updated my drivers, reinstalled
OK, so how the heck do I get a dedicated server running for 8 players in 1.0? I downloaded RoR2DS and made a server.cfg using the stuff from server_startup, but no idea where to go from there
Launching RoR2 from the dedicated server file also only opens the command window and never actually opens the game, yet I can open it via steam. If that means anything
The dedicated server is just a command line utility, so that's normal. If you want to play the game, you start that separately on top
i've only managed to connect to mine directly by IP address, you get the console up in-game with ctrl+alt+tilde and do "connect [ipaddress]:[port]"
i've been trying to figure out how to get it to show in the server browser, with not much luck
The only setup you did was that server.cfg file as well, correct?
I ended up editing the server_startup directly but i should probably make a server.cfg instead
Oh, you need to set up port forwarding on your router too
Ah, so you have to mess with all of that. I think I did that with a private minecraft server before but ended up being a little concerned about firewall issues
Either i'm missing something very basic in the config or the steamworks implementation is borked - if i try to set the lobby type to public from the command line or in the server configs, it tells me the steamworks client isn't available. ``steam_lobby_type "Public";`
The same command works without errors in-game
Is there any known issue list with the dedicated server? I'm trying to run it on a server, but I can only get it to run when steam is running in the background. Without steam running in online mode it doesn't want to connect to the steam master servers, and I can't connect via the client.
Also my server doesn't show up in the ingame server browser, but I can connect via the server list in the steam client. Are there any settings in the server.cfg that I have to modify?
Edit: I've also tried installing it from the steamcmd but then it doesn't work either
i keep getting fps drops any tips guys?
@steady topaz remember my issue from yesterday? it still persists. wasnt noticable just after starting up the laptop, but within minutes it was. it also started happening in wordpad. i uninstalled vjoy but that didnt help. the issue doesnt occur when using an external usb keyboard, so im guessing it's the hardware
@upbeat haven That's something super wierd. Keboards do have a chip on board, but its super unlikely that it got mad and sending this particular input.
The keyboard doesnt send on/off signal for each key, they send time stamps when the key is down and when up i think. And in your case thime stamp for up is delayed af. I cant think on how to fixc that whithout changing the keyboard entirely.
@steady topaz will turning off xmp mess with other games???
@silent yacht it will reduce RAM performance, but it will be more stable.
Ror crashes because this particulr engine version got some troubles with ram.
@steady topaz not doing it then since i play some games that require extreme ram performance, guess i will have to wait for a patch then
@silent yacht i know none of such games that could not be run on 1600 ramn if the volume of the ram is enoug. Starbase maybe? But nothing like space engineers or other voxel based games.
Disabling XMP doesnt turn your ram into potato, it reduces the frequrency.
@feral pine looks like random crash issue, its recommended to turn XMP memory profile to disabled from your BIOS.
Возможно крашит из-за профиля ускорения оперативки. Материнки обычно ставят параметр в авто, это крашит игру на данный момент.
hey i'm still getting random lag spikes even when i turn the graphics down to zilch
could it be a memory thing? do i need to just buy more bloody ram?
(this has been a long time coming so it's probably a good idea)
hmm point, it's not crashing
it's not really fps tho so much as sudden stutters and then back to 60
once ever ~20 seconds
doesn't really seem to be anything in particular that's obviously tripping it
how much RAM do you have
8gb
should be fine
i just saw someone mentioning ram above and i was excited that there was actually a solution
as far as RAM goes
it really doesn't seem to be a graphics thing either
i was watching the load on everything and nothing seemed to peak
i really don't know what the issue could be
reccommended is 4gb RAM so 8GB is fine and if you were having RAM issues it would be constant not every 20 seconds
id make sure your CPU is all good
i'll try again today but i think cpu seemed to barely be touched
uninstall -> reboot machine _> reinstall reboot machine
i tried uninstalling and reinstalling
trust me its different than just uninstalling reinstalling
because rebooting will refresh the windows registry
windows gets to start with the program not there and set its self up and then you reinstall it and its allowed to start with the registery key
otherwise you uninstall it adnn then reinstall it and windows hasnt really changed anything
@candid pike you turned off shadows right?
also whats your GPU and is it windows 10 or 7?
@candid pike laptop? GPU? Other games lag out?
windows 10, 1060 gpu, tried setting all graphics to lowest including 1/128 textures, not a laptop
no other games have this issue
trying to reinstall now
When I bought and run the game, it keeps cut off . How can I fix it?
Even if I delete and re-install it, it keeps cut off again.
why it cut off again and again??
@candid pike
Disable vsync from game and from nvidia control panel. Set performance in power setting.
Update drivers, see if it helps. Try older drivers.
Check your cpu core speed isnt low or goes up and down with cpu-z
Check thermal and power throttling
why it cut off again and again??
@orchid flame Can't it be fixed?
@orchid flame I am having trouble undertanding your issue. Is your game crashing on startup or its random crashing while you play?
@steady topaz cut off when starting the game.
oh shit i forgot to mention that these issues are just from the 1.0 update
@candid pike nothing have changed in the game, that could cause those issues at all.
i'm trying to think what i've changed
check on your drivers 1st, if you had driver update lately - try older drivers.
the only big obvious change was that i installed docker for windows, which seems to be problem causing, but it's not running
i was on older drivers and then tried newer ones after ror2 wasn't working
@candid pike temps/load on cpu?
i'll try it out again but i'm pretty sure the cpu seemed alright
Only the black screen continues, then cut off
@orchid flame i don't think anyone knows exactly what 'cut off' means, do you mean crash?
@orchid flame Last time.. i do not understand what you then "cut off" means. Is it crash? If so you will see an error window. If it just closes - restart your steam.
@orchid flame Last time.. i do not understand what you then "cut off" means. Is it crash? If so you will see an error window. If it just closes - restart your steam.
@steady topaz oh thx
There appears to be no XMP settings in my bios. However, there is a thing called ai overclocking but I am pretty sure it's not what I need
@orchid flame Check the files by those paths, log and error is the most usefull, drop them here.
Logfile
C:\Users\USERNAME\AppData\LocalLow\Hopoo Games, LLC\Risk of Rain 2\output_log.txt
Error and crash.dmp should be there too, but if not - check
C:\Users\USERNAME\AppData\Local\Temp\Hopoo Games, LLC\Risk of Rain 2\crash.dmp
@feral pine не rtx серия же?
@feral pine Видюха какая?
сорян я вообще картошка в этом плане
@feral pine Я уж не удивляюсь ничему. Меня как то человек спросил что я имею в виду под "перезапусти стим" Так что привык уж 😄
@feral pine память не разгонял же? Оперативку
И никаких гамерских програм для производительности сам не ставил?
Типа VR, например?
Сверху я пути указывал к файлам, скинь мне лог.
@feral pine C:\Users\mavei\AppData\LocalLow\Hopoo Games, LLC\Risk of Rain 2\output_log.txt Папки с крашами создаются же, еррор оттуда?
@feral pine Погоди, я тебе не тот линк выдал. Но ответ все равно дал мне нужную инфу.
@orchid flame Check the files by those paths, log and error is the most usefull, drop them here.
@steady topaz
Hopoo Games is missing from C:\Users\USERNAME\AppData\Local\Temp\Hopoo Games.
@orchid flame Install both 86 and 64 of:
https://www.microsoft.com/en-us/download/details.aspx?id=48145
thx
я тоже думал что у меня с дистрибутивами вот этими вот проблема но я нажал репейр на х64 и мне это не помогло
может стоит нажать репейр и у х86..
@orchid flame Install both 86 and 64 of:
https://www.microsoft.com/en-us/download/details.aspx?id=48145
@steady topaz
It doesn't work. I think it would be better to just refund it.
@feral pine эти дистрибьютивы так не починятся.
@orchid flame I cant read that. Is it saying there is already one installed?
зареинсталить их значит?
no. it means Can't install @steady topaz
pretty sure you need to delete them first before installing again
or else they refuse
@orchid flame You need to delete Microsoft Visual C++ 2015-2019 both for 86 and 89 before installing those. There is a known issue where you cant install those 2 needed files for the game because of corrupted registry entrys. You can manually fix registry, but better to use ccleaner to find registry problems automatically and fix them right there with a button click.
@orchid flame You need to delete Microsoft Visual C++ 2015-2019 both for 86 and 89 before installing those. There is a known issue where you cant install those 2 needed files for the game because of corrupted registry entrys. You can manually fix registry, but better to use ccleaner to find registry problems automatically and fix them right there with a button click.
@steady topaz Oh... I think it would be better to just refund it.
@feral pine Я ничего сразу в глаза бросающегося в файлах не вижу. Крашит рандомно, с окошком юнити и всегда один и тот же аксес виолейшон? Код ошибки не меняется?
окошко юнити вылезает на секунду и исчезает
Hi Everyone, I experienced the unity crash / black screen with only music on launch. I found out my graphics card was for windows 10 and not 8.1 somehow... getting the correct version allowed me to play risk of rain 2. I use nvidia geforce but downloaded the graphics card manually.
@orchid flame Games like this doesnt pop out often. Its your choice. You should know that this isnt official tech support team you're speaking with right now. I am not a part of development team, just like anyone else who answering here. Check pinned messages for more info
@feral pine Потерял нить повествования, в личку напишу.
Hehe the multiplayer is again not working for me and yes i tried already everithing what the chat say....
@brave hearth Try servers that have numbers in ping column, instead of N/A
The thing is i want to play with my friends and i´m the only one who it is not working
@brave hearth Try direct connection or lan emulation?
@steady topaz i might have found a solution uninstalled all my drivers since i was having issues like me anti-virus being a blackscreen now i can see my anti-virus again and interact with it. barony crashed before and it works again, now heres hoping ror2 is the same (note: DO NOT INSTALL NVIDIA GEFORCE GAMING DRIVERS VERSION 451.57)
It seems to be the only working workarounds that do not requre you to figure out your router and networking problems. Also People that i contacted to use it seems to have some wierd issue, where they were able to play (before using those workarounds) yesterday just fine and today it isnt working, and then back it works again. It seems that something is going on with the net, but i cant say for shure what's wrong. Only thing that i can say - nothing changed whitin the game netcode.
@silent yacht i dont remember your case, seems like i wasnt contacting you thru DM. Let me get a look for messages here.
the thing is i played with randoms and it works fine after that i want to play with my friends and now i cant play the multiplayer again xD.
@steady topaz its fixed but now am in lag city
I have no sound right. I haven't played in a while, but I assume it was the 1.0 patch. Sound works in windows. sound is enabled in the game.
@silent yacht Sory for waiting, i have no time right now, but could you pm me and describe what exactly were you having, what you did and whats wrong with game now. Ill check on that later.
@brave hearth link for workaround to connectivity so you could play with your friend:
https://discordapp.com/channels/417739215355510784/559902278018924557/724218038651453511
its fixed :D:D:D:D:D i downloade nvidia drivers 446.16 and now it works again everything works again :D:D:D:D:D:D:D:D
my risk of rain 2 out of nowhere, decreased the windowed to that size, even if I put it in fullscreen (alt + enter) it remains at the same resolution as if it had a black screen, this has happened to me in cuphead but this has been 1 year and it was on another computer, I don't remember how I fixed it, does anyone know how to fix it?
I read the chat and saw that you guys already found a way to solve it, thanks, it worked 🙂
Okay
I'm about to eat my keyboard. I can't for gods sake join any multiplayer games. Ping always N/A except for 2 dedicated servers, both in US and with 16 players. I can't join any other game without getting a blackscreen.
After 30 seconds i get booted out of every other game when waiting in the blackscreen. Or i just press escape and quit to menu myself.
And if ever get into a N/A server i get this.
My game slows down to an absolute crawl. No, BEYOND an absolute crawl when I try to enter the multiplayer menu
now i got stuck in this
I read the chat and saw that you guys already found a way to solve it, thanks, it worked 🙂
@lunar hawk You might be the 1st person who did that, honestly. Thank you
Has anyone else had this bug?
like, it's one frame every minute
It never ends if I want to make my own lobby but I can join others if they send a steam invite
EVENTUALLY I load in
I'm seriously at my wits end. Can anyone help?
inb4 I'm the only person with this bug and so it'll never be fixed and I'll just suffer forever
I guess I'll see if my drivers need updating?
has anyone had the issue where when you open ror2 it is on a black screen and this ror2 unity thing pops up then closes along with the game?
I had this after updating to 1.0
i finally unlocked captain so i had everything done
my save file got corrupted
hey, what console commands do you need to ender to get more then 4 person lobbies? does it only work with dedicated servers? i tried sv_maxplayers and steam_lobby_max_members, but still could not get a 5th person in game
Has anyone figured out how to fix the horrible lag even though it worked fine when you first got it
@quiet gale yeah I have the same problem too it sucks I just wanna play the game
Idk if anyone has any experience with modding the game? I swear I always have issues trying to mod it. Does R2ModAPI have to update after each game update?
it's the only mod that wasn't immediately fixed when the update came out
after the 1.0 update, discord overlay stopped working, and it's only with ror2. anything I can do to try and fix it?
in fact I cant interact with discord at all when in ror2. I have a keybind to mute myself on discord, but it doesnt work while in ror2, which is really problematic for me
Ever since the 1.0 update i have been getting instances of my game freezing at seemingly random times. Only happens a couple times a run and in not sure what to do. Anybody else seen this issue?
Is it an acknowledged issue that the higher quantity of monsters in one stage the higher other players' ping gets?
After the 1.0 update my friend has been having this problem where the game boots up and upon reaching the main menu, several popups appear in the corner that tell him that no keyboard mouse or gamepad is detected, and he cant control anything or bind any keys. He tried using a controller and it allows him to navigate the menus but upon entering the game all the abilities are bound to 'unknown' and the camera forces him to look down. He has verified the files and uninstalled and reinstalled. Anyone else have this issue and know of a fix or is there anything he can do?
Can anyone help me out? 2 days ago multiplayer was working fine. But as of yesterday I can no longer join or host multiplayer matches.
It gets hung on a black screen, or it joins finally and it's really buggy.
soooooooo servers on matchmaking are lagging REALLLY Much sometimes.... why is that?
Ok so we are trying to play multiplayer. Our friend can't join, well he joins the lobby, we start the game and he can't see anyone on the screen and we can't see him. We tried: Reinstalling the game 3 times, restarting computer, game steam, reinstalled steam and game, forwarded ports, verified files, switch internet connection, checking firewall, no mods alosNOTHING has worked... 😦 can we get some help please?
I have a streamable link of my issue: https://streamable.com/izkelm
Prior to the 1.0 update, this type of freezing never happened. Its consistent with single and multiplayer. The video was taken today (8/15) but I've had the issue since 1.0.
Does anyone know if this a personal issue, or have the devs ackowledged it as something they're working on? If its personal, is there a fix?
my friend and i are trying to play together. sometimes we'll randomly start up a game and start lagging massively
does any1 know a likely reason behind this issue?
was doing the 20 stages thing for commando and after stage 20 I entered to do an artifact, when I proceded to use the teleporter the game just soft locked, I can still press escape and the menu appears properly. it's just that the next stage won't load
if I quit to menu do I get the unlocks? or did I just wasted a bunch of hours of my life?
Is there a way to reset all controls to default? Willing to reset all configuration to default if necessary.
I play in a high resolution so my GUI in quickplay is super small, but the rest of the game is scaled properly. Any fix for this?
KBM isnt working after uninstall, any idea wtf to do

