#[SOLVED]Videos not playing (no audio now)
182 messages · Page 1 of 1 (latest)
Not playing where?
pacman -S pipewire pipewire-pulse
videos don't play if the audio setup is broken
Those commands will fix it assuming you did not break it in some other way when trying to fix it
Online videos aren't playing and there is no audio
I tried to fix the audio but the video stopped playing and the audio didn't get fixed too
I'll try this
Just install pipewire see if works.
I'm a Lil busy rn I'll do it a little later
pacman -S pipewire pipewire-pulse
This right?
I think now the frame rate became low
I think now the framerate became low
And still no audio
I think it's lagging because when I go to change quality it lags a little
Check aplay -l
Then?
What is the output?
Have connected the tv speakers using aux cable
The audio didn't travel through HDMI so used aux cable
Ok, run systemctl --user status pipewire output
Did you reboot?
After doing this?
Yes?
Reboot.
K
So now this?
Yeah, and show the output.
Idk what this means btw
Now try playing some video.
Make sure that the audio is not mutted.
Look it's unmuted in the player too
Install this alsa-utils
sudo pacman -S alsa-utils?
Am i cooked?
What?
I meant is it not fixable?
What makes you think that?
Idk i tried many things but it just didn't work
Maybe you can make it work🤔
I did this
Run in the terminal alsamixer
And show the output
Done
Hit Escape and run speaker-test -c 2 -t sine
Hist?
Just hit Escape and run that.
Did you hear anything?
I have windows too audio works on it
So it's related to linux i think
Show the output
Select the second one and hit Enter/Return
Show the output
Yes
Maybe I have to go to speaker?
Yes.
Was this it?
Show me
Try this speaker-test -c 2 -t sine see if you can hear anything.
Try playing some video
Lag and no voice
Do you have any speeker pluged in?
Is it a desktop?
Uh i have tv plugged in
No other speakers
I use tv speakers
Did i answer correctly?
Okay, install this sudo pacman -S wireplumber pavucontrol after run systemctl --user restart pipewire pipewire-pulse
Plug in some headphones or another speaker into your system, not the TV?
Lemme try headphones
And run speaker-test -c 2 -t sine
They are wireless
Just reboot.
Magic
So what's wrong with my tv speakers?
What speaker are working?
Okay, show the output of pactl list short sinks
Something is suspended
Is the TV connected over HDMI?
For display - displayport to HDMI
For audio - aux
Displayport to HDMI isn't carrying audio 😔
Aux gives sterio audio
Aux to rca
Try this pactl set-default-sink alsa_output.pci-0000_00_1b.0.analog-stereo
after that run speaker-test -c 2 -t sine -D alsa_output.pci-0000_00_1b.0.analog-stereo
PremiumAV 3.5mm to 2 RCA Audio Cable 1.5 Meter – Gold-Plated Stereo AUX to RCA Male Connector for Speaker, Amplifier, TV, Mobile, Home Theater, Audio System, Car Stereo https://amzn.in/d/1NOTkgk
3.5mm to 2-Male RCA Adapter Cable (1.5 MTR) is the perfect solution for connecting your 3.5mm headphone jack devices, like smartphones, laptops, or tablets, to RCA-compatible audio devices such as speakers, stereos, or TVs. With a 1.5-meter length, this high-quality adapter cable ensures clear, c...
That's long
Just copy the name from that.
Not working
Show me.
The command is pactl set-default-sink alsa_output.pci-0000_00_1b.0.analog-stereo
That is good, run paplay /usr/share/sounds/alsa/Front_Center.wav
No output
Do you hear anything?
Na?
Run speaker-test -c 2 -t sine -D alsa_output.pci-0000_00_1b.0.analog-stereo
💀
See if you can hear anything.
Or this speaker-test -c 2 -t sine
Nothing
Open alsamixer.
Show.
I think alsamixer resets when reboot
VIDEO IS NOT LAGGING ANYMORE IT WAS BECAUSE I TURNED OFF HARDWARE ACCELERATION
Yeah, I know that.
Does audio work?
My audio started working for my pc speaker not my tv speakers
Pls tell how to save the settings
Chat gpt said i should put auto mute to line out but after doing that I don't get any audio
You're a youtuber yooo