golden temple
Hey guys need some help. I just built a pc and I installed windows, updated drivers did everything and it worked fine for a couple hours. I then restarted it a few times tryna go into safe mode to tweak something in the BiOS (for Valorant). And now the motherboard is showing a white and yellow LED (not recognising GPU and RAM). Except for the GPU everything else is brand new. And I can’t access BiOS either because my monitor keeps saying no signal.
Just need some help cause I’m kind of lost 🙏😅
golden temple
I unplugged my GPU and plugged the Display cable into my motherboard and it was able to boot perfectly. I then plugged my GPU back in and the white light is back
dawn wing
I unplugged my GPU and plugged the Display cable into my motherboard and it was ...
try shorting the clear cmos header
golden temple
try shorting the clear cmos header
I don’t know how to do that and lowkey too scared to do that 😅
dawn wing
I don’t know how to do that and lowkey too scared to do that 😅
read the maunal
golden temple
I did completely take out the cmos battery before
And left it out for a couple mins
golden temple
I unplugged my GPU and plugged the Display cable into my motherboard and it was ...
I’ve left the GPU in now and plugged the dp cable into my motherboard and it boots fine. But it didn’t work with the GPU plugged in
dawn wing
what specs you got
golden temple
ryzen 7 9800x3d, 6000mhz cl36 ram, ASUS TUF GAMING B650E-E, GTX 1080 (didnt want to upgrade just yet)
dawn wing
ryzen 7 9800x3d, 6000mhz cl36 ram, ASUS TUF GAMING B650E-E, GTX 1080 (didnt want...
ok remove gpu/1 stick of ram and see if it boots may take like 5 min
golden temple
I just booted it using mobo and it worked. Then connected the display to the GPU again and it fully boots now.
For some reason the white led is still on even though the pc boots fine, shows a display and task manager detects/recognises the GPU and all its stats.
I got 0 clue on what’s happening 😅