polar iron
The board is warped were the main power connector is. Before it would kill power to it's own self but now it kills power to it's gpu and i have to run the repair program to fix the gpu after it lost power and me doing a force shutdown to reboot it.
I have to keep 2 case fans running to keep the board at a low temp. The 2 case fans are set to active at 30°C/86°F and start slowly going full speed. I also have to once in a while push the main power connector back down to reset it. The second image with the board out of the case was the 6th of 8th of this year. The board has roughly has 10 years left
zinc wharf
