Borken PC

[upper saddle]

there should be four LEDs, one of which has lit up. Can you figure out what the text next to the orange LED is? that would help a lot

[granite jay]

I try

[granite jay]

@upper saddle

[lyric lance]

your ram is in wrong slots and image is too blurry to see pcb silkscreen

[granite jay]

Ok

[lyric lance]

stick your ram in gray slots

[granite jay]

Now ?

[lyric lance]

something is wrong with ram, try to boot with only one stick in 2nd slot from the right

if it still lights up then shut it down and swap to the other stick

if still not good after that then take out cpu and check if pins are bent

[granite jay]

If you want add my on DC and then call me

Pins are fine checked 2:30 h nothing

[lyric lance]

maybe it is doing ram training, leave it for like 10 minutes

with both sticks in gray slots

[granite jay]

Tf

How much i owe you

IT think IT works

@lyric lance

[lyric lance]

try if other stick works

[granite jay]

Ok

I di

Two so i think falty RAM ?

@lyric lance thank you so much i know how to fix Else so yea thanks

[lyric lance]

is it blinking at all or solid

@granite jay try doing these steps

[upper saddle]

its a RAM issue yes. slot it into A2 and B2 and let it sit

[lyric lance]

there seem to be a common issue

[upper saddle]

the ram may not be auto compatible with the mobo so it may have to do DDR5 training

can take a few minutes

[granite jay]

I tried more dead RAM 6monht old

[upper saddle]

is RAM in the two gray slots now?

if so, power your PC on and wait like 5 minutes

[granite jay]

Tried al posilbils