Cinebench (Ryzen 7 9700x, RTX 2080 Ti, 32GB G.Skill DDR5, EVGA 850 GT PSU, Gigabyte b650 X AX V2)

[timid wedge]

You forgot the most important part of this equation

The test results (which test + the number you got)

[stable pumice]

i was going to wait until i got a response. i've already asked elsewhere, and no one has gotten back to me. i'll run a fresh round of tests to get pictures of it

Also, i would've responded sooner, but this server was muted by default for some reason

[fallen oxide]

all where your running 65W or 105W tdp

[stable pumice]

i updated to the latest bios that supports the higher tdp, but i haven't messed with it yet.

[fallen oxide]

ok i dont realy have any data for 1 thread

and 1100 points not crazy bad

[timid wedge]

Doesn't seem incorrect

[fallen oxide]

that down to cooler or your running 65W tdp

[stable pumice]

but when i see online about cinebench scores, i see people talking about over 10k single core on my same cpu

DOG IM NEW TO THIS

[fallen oxide]

no

[fallen oxide]

that allcore

[stable pumice]

multi core? it wasn't 10k either 😭

well, that one was

the one i ran earlier wasnt

[fallen oxide]

your getting 1114 points

https://hwbot.org/submission/5704851 this is a 105W tdp mode getting 1351 best 9700x is 1668

[fallen oxide]

get hwinfo64 and check temps/clocks when running

[stable pumice]

So far, my core temps are hovering around 50c. I could try running the stress test tho

[fallen oxide]

idle temps dont matter check when running

[stable pumice]

In multicore, it is running

[fallen oxide]

what PPT reading?

[fallen oxide]

yep 65W tdp mode

since your using 88W

[fallen oxide]

amd added option to use 142W ppt with its fancy 105W tdp

[fallen oxide]

set in bios to use 105W mode

[stable pumice]

Alright, I'll give that a try

[fallen oxide]

hay maybe letting cpu use 50% more power will help

and your ram is runinng jedec

[stable pumice]

i haven't touched it tho

[stable pumice]

Idek what that is

[fallen oxide]

your ram is running at 4800 due lack of faster jedec bin or you did not enable xmp

but cinabench dose not care at all about ram so i dont think that the reson

[stable pumice]

I disabled expo cause i was experiencing a consistent crash in a game i was playing. I chalked it up to instability

[fallen oxide]

what bin?

[stable pumice]

Pardon?

[fallen oxide]

what rated speed was the ram

dont say higher then 6000

[stable pumice]

Its advertised for 6000MT

[fallen oxide]

if your only got 2 sticks in the right slots that very bad if that dont work updated bios is somthing that might help/ if your not on bios with 105W tdp mode may aswell

[stable pumice]

I have them in a1 and b1 as stated by the mobo manual

[fallen oxide]

that bad

a2/b2 are the right ones

[stable pumice]

That could be what i did, lemme double check

Nvm, it is a2 b2

[fallen oxide]

have you updated bios?

since getting the board

[stable pumice]

Yes, i have it on the latest. I think its F32g

[fallen oxide]

well the xmp not working is #overclocking problem

and for the r24 score being bad your only running cpu at 65W where amd added suport for 105W a bit ago

[stable pumice]

It works, i just had it disabled. Im not 100% it WAS a stability issue, i just disabled to see if it helped

I enabled 105tdp. I'll run the bench again

With 105tdp

[fallen oxide]

was it fastrt

[stable pumice]

A little bit. Probably roughly 10% based on the score. i saw that 105tdp does offer 15% better performance, so im sure it might just be some slight variance