#The display says no signal

1 messages · Page 1 of 1 (latest)

cobalt light
#

I just built a PC.
The cpu fan is working
The gpu fan is working
But the display says no signal

pure cove
#

Where do you have the monitor plugged in to?

frail moat
#

↑ that, and also
What is the hardware in question -- the CPU model, the GPU model and the monitor model would be important in particular

cobalt light
#

RX580

vernal forum
#

^
That, and also
Do you have any motherboard LEDs shining or a memory error

#

Try different RAM slots if you have a memory light shining on your motherboard

cobalt light
#

E5-1650

vernal forum
#

Oh and make sure your monitor is plugged into your GPU, the GPU does not pass through to the Motherboard graphics

cobalt light
#

The thing is, this is 2011 motherboard

#

There is no debug LEDs

frail moat
#

I'm starting to think the GPU and motherboard are simply incompatible

vernal forum
#

OR the bios hasn’t been updated for the new CPU

frail moat
cobalt light
#

Motherboard: JY-X79M

vernal forum
frail moat
cobalt light
#

CPU: E5-1650

#

Graphics: RX580

vernal forum
#

The GPU should be perfectly compatible since most motherboards that support the E5-1650 have standard GPU support for those cards

#

I’d bet it’s the RAM, or your cable you’re using to connect the GPU to your monitor

#

Also try switching your monitor’s input, some monitors don’t automatically select inputs

frail moat
cobalt light
#

This is the motherboard

#

Uh.. the image is taking forever to upload

vernal forum
#

Try a different memory configuration.

#

That slot layout has been problematic for me before

cobalt light
#

I’ll try unplugging one of the memory stick

vernal forum
#

And reseat the other one (pop it out and back in again)

#

Sooo did it work?

cobalt light
#

It did

#

But it no longer works when I plug the other Ram stick

vernal forum
#

Then the other RAM stick is bad causing a memory error

#

Glad your pc works though