USB-C PCIe card 10Gbit/s for case USB-C 3.1 Gen2 Connector

[whole willow]

Please help me find a solution to this:
I bought this motherboard and case, and it doesn't have USB-C connector on the motherboard, I was going to use a USB 3.2 Gen1 header splitter but I read on forums that it wouldn't work and also the speeds would be limited anyways at Gen1, so I quickly found out these PCIe cards, but cant find any for USB 3.1 Gen2 Speeds of up to 10Gbit/s
most cards I found that have Gen2 the ports are outside in the back of the pc not with the connector for the motherboard that I think its called type E ??

https://unykach.com/en/pc-cases/pc-case-atx/pc-case-atx-revelat-black-uk121801/
https://www.asus.com/motherboards-components/motherboards/tuf-gaming/tuf-gaming-b550m-plus-wifi-ii/

Also I'm having issues with RGB control on the radiator fans / RAM / AIO pump
(the info text works fine just didn't have the program set to boot at start in one of the pics, but it connects via a normal USB 2.0 header on the bottom)

The cooler I'm using is a DeepCool LD360 ARGB and both the RGB lead from the pump and the x3 fans are daisy chained to a single end point where it has 5V, D, one empty and Ground, and its connected to the "1 x Addressable Gen 2 header"

also the pump is connected to CPU_FAN, and the Radiator fans are on CPU_OPT (I assume its optional)

[shell seal]

you're looking for a card like this one https://amzn.to/3Dc8Ve6

[whole willow]

okay thanks I will buy order that one, it says it does 10Gbit/s

Do you have any idea about the RGB not being adressable?

[shell seal]

I haven't personally tested it(the one i'm using isn't available for order anymore) but it looks like a good option

sorry I don't run any RGB someone else will have to help with that

[whole willow]

its alright thanks anyways

okay for the ram I think I got it I need the corsair iCUE bloat, sorry software