#nothing is working. it’s worse now
1 messages · Page 1 of 1 (latest)
Might be a power supply issue because the power might not be enough, get a new power supply
I hope not, it’s a 1200w platinum power supply.
Do you know what the motherboard code its getting stuck on is?
That A0
Thats probably your best source of info, I would check the motherboard manual and see what the status is saying.
Impossible considering that all three ssd have been running fine and showing up in multiple builds even now for at least two years
Why would the ssd matter for motherboard codes.
That’s what I got when I looked up motherboard codes
What MB is it?
Have you tired to boot into bios?
So no display output at all.
No I get display
The computer just shuts off and then turns back on and the fans run real hard and it constantly turns off and on after the bios screen. Works just fine for tweaking in bios though
So its able to boot into bios, but not into windows?
Yup bingo
Are all the drives showing up in bios?
Next build will be with amd I have had nothing but bad luck with intel. Yes all drives show up
Well I’ve had really good luck for about two years then all of a sudden issues
Reset windows. And no nothing weird in bios
It very well may be a psu issue since the one I had displays an insanely low wattage on its lcd no matter what I’m doing
So I’ve ordered a new one for a backup and sent in an rma for this one
Yeah could be that, Im going to dig in the manual and see if I find anything.
for the MB
Like you could try taking the boot drive out and putting it back in again.
Like A0 is generally what its supposed to be while running.
from what I can tell
I would try reseating the boot drive, and making sure the right boot drive is selected in bios.
I did try that I’m sorry to say it hadn’t worked. And yes Ao is generally the all okay code