Finished my build. Lots of problems

[dreamy jetty]

Specs:
CPU: Ryzen 7900
GPU: AS Rock Radeon 6600x
Motherboard: PRO B650M-P
Ram: DDR5 32gb
SSD: 2tb m2 NVMe
Case: Montech Air 903 MAX
Cooler: Thermalright Peerless Assassin

Questions:

1. My case fans have not turned on once. I don't know why. They were pre-wired into a fan hub built into the case. I connected the 4-pin female cable coming from the fan hub to the SYS_FAN 4-pin connector on my motherboard. I have put the PC under stress tests and they have still not turned on at all (nor the RGB). I have not put the side panels back on after finishing the build if this affects anything.

2. My GPU fans only run sometimes. Is this normal? They don't even run while watching a youtube video.

3. BIOS: when running the bios, the Expo profile button is grayed out and I can't click on it.

4. Drivers: I installed windows using a DVD and it seems fine. Is the process with installing drivers the same with a disk as it would be with a flash drive? I don't really know how to install drivers. All I have done is download the drivers on this page:
   https://us.msi.com/Motherboard/PRO-B650M-P/support#driver

[dim inlet]

1 what fan hub is the fan hub getting any power since most fan hub only get pwm form fan mobo
2 normral for lots of gpu its bases on temps
3 ? what ram
4 driver install are not linked to how you installed windsoe

dont use the disk that comes with mobo there allways old

[dreamy jetty]

1. The the only cable leaving the fan hub was a 3 pin (the same size of a 4-pin but with one space skipped) female connector that I connected to the only 3 pin connector on my mobo (top right). I don't know what fan hub it is; it just came preinstalled in the case. I'll send an image of it.
2. I don't know exactly what ram it is. I can send a picture of the packaging it came in.
3. Not sure what you mean about the drivers

[dim inlet]

the drivers you need is chipset/audio/lan/sata maybe +gpu driver for the rx6600

[dim inlet]

are there any other ports then the fan connecters since one fan header cant power 6 fans

[dreamy jetty]

where is the gpu driver download?
does this work?

[dim inlet]

so you need to give it power form offen a sata power connecter

[dim inlet]

yep

[dreamy jetty]

case has 4 fans, one sec, I'll send an image of the fan hub

[dreamy jetty]

I have one of the left one and 4 of the right one

not plugged into anything atm

[dim inlet]

well psu will have cable on right that plugs in

sata power

[dreamy jetty]

my psu isnt modular

[dim inlet]

all psu shoud have sata power

[dreamy jetty]

the cables just come from the big bundle of cords

[dim inlet]

if not its very bad one

since sata is user on most things

[dreamy jetty]

including both of the ones from the image

[dim inlet]

is there one of those on fan hub

[dim inlet]

where this one go

[dreamy jetty]

to this

as simple as connecting to this to one of the sata power connectors?

[dim inlet]

plug that into psu

mail/femail connceter

psu will have maiting connceter

[dreamy jetty]

before doing so I should turn off the pc and then the psu tho, right?

[dim inlet]

yes but sata spec shoud work

[dreamy jetty]

Ok all 4 fans are going

[dim inlet]

what else

[dreamy jetty]

now drivers. How exactly do I install them. I extracted the LAN one for example and read the included FAQ document

I got this

[dim inlet]

download and install

[dreamy jetty]

don't I need to update them within the device manager?

[dim inlet]

dont use device mangaer

windose allways gets old drivers

[dreamy jetty]

rn they are just .zip files (except for the LAN one I extracted)

[dim inlet]

you got them form msi site

[dreamy jetty]

yes

do I just run this?

[dim inlet]

yep

[dreamy jetty]

will the gpu driver I asked about earlier be the same process

[dim inlet]

yep

[dreamy jetty]

what exactly will change with my pc that I'll notice. The only problems I've really noticed is the PC seems notably slower than it should be and a couple of things I've downloaded have seemed unusually slow while downloading (maybe thats just the MS store being the MS store)

I assume I don't have access to LAN at the moment

also, I assume I need to keep these driver files somewhere once I've installed them

[dim inlet]

? how slow how many mbit/s

[dreamy jetty]

like it downloaded 10mbs in 30m

then I went back later on and got the whole thing to download (1.1gb) in like 10m

[dim inlet]

10mbit/s or 10MB in 30 min

[dreamy jetty]

but it took a few tries

[dreamy jetty]

10mb in 30m

[dim inlet]

wifi sucks

[dreamy jetty]

it's ethernet

I ran a speedtest and got around 140mbps

[dim inlet]

ok your intetnet suck or server downloading from sucks

[dreamy jetty]

ive had similar issues with the MS store before so maybe it's just that

my question mainly is: will these drivers affect internet speed (I'm guessing not)

[dim inlet]

they can

[dreamy jetty]

do I just install all of these?

[dim inlet]

all

[dreamy jetty]

while im waiting for this stuff to install, maybe you can help me figure out the BIOS issue? Maybe I need to update the BIOS, idk? I can send an image if needed of the grayed out EXPO Profile button and the entire BIOS Screen

[dim inlet]

what bios problem?

[dreamy jetty]

In my original post

The expo button is grayed out

[dim inlet]

what ram

?

[dreamy jetty]

I can send an image of the back of it too if needed

[dim inlet]

its 5600cl46 right

[dim inlet]

yes

[dim inlet]

well look right

check with cpu-z

spd tab/mem tab

[dreamy jetty]

cpu-z?

according to pcpartpicker it's 5600cl46

[dim inlet]

then why shoud there be expo

[dim inlet]

just check

[dreamy jetty]

idk. im just trying to follow the bios settings in the PC Setup vid and I was told to enable XMP/EXPO

[dim inlet]

you dont have that

[dreamy jetty]

fair

for sound, I'll need to use speakers/headphones, right

[dim inlet]

it will be running at 5200 42-42-42-84 i think

[dim inlet]

yes

[dreamy jetty]

I downloaded the SATA driver thing and it brought up the same chipset thing I already downloaded

[dreamy jetty]

this

is SATA just one of those options

[dim inlet]

are you using sata

if no its fine to skip

[dreamy jetty]

just to the fanhub

[dim inlet]

thats just power

[dreamy jetty]

not for a drive

fair

[dim inlet]

not the sata chip that dose data

[dreamy jetty]

is there a way to enter the BIOS without restarting and mashing delete?

I tried it and it didnt open bios

[dim inlet]

yes hold shift and hit restart

advance

uefi

[dreamy jetty]

didnt work

do I hold shift prior to hitting restart and keep it held the whole way thru?

[dim inlet]

yep

[dim inlet]

hit restart in the windose meun

[dreamy jetty]

The monitor just comes back on as a black screen

Like the restart button just doesnt work or smth

[dim inlet]

why are you trying to get into bios

[dreamy jetty]

To set up anything else in the Bios I can, and probably overclock

[dim inlet]

ok

but first set up windose

[dreamy jetty]

I skipped the bios before so I haven’t done anything there

[dreamy jetty]

What else do I need to do after drivers?

[dim inlet]

check cpu-z

[dreamy jetty]

Where is that

[dim inlet]

and get hwinfo64

and occt if your going to oc

[dreamy jetty]

I have hwinfo

I’ll get occt; where is cpu-z? A downloadable program or something on my pc already or something else?

[dim inlet]

download

[dreamy jetty]

anything I should do with cpu-z?

[dim inlet]

check spd tab/mem tab

[dreamy jetty]

all I got is a .txt

[dim inlet]

?

[dim inlet]

and the exe in the same file/folder/zip

one that ends with 64

[dreamy jetty]

oh, a program that doesn't automatically open when it's installed

[dim inlet]

🤦

[dim inlet]

WHY specteck

[dreamy jetty]

uhhhh

where, what even is specteck

[dim inlet]

did the ram have heatsyncs

[dreamy jetty]

idk

[dim inlet]

any way pc set up

mosty rest is random thing like download all thing and just check thing like temps/things are in order

[dreamy jetty]

is it a big problem if not

The ram

[dim inlet]

if not big increvanince take ram out and send image of side with IC

[dim inlet]

well mistory ram that sold by brand i have not seen befor

[dreamy jetty]

Uhhh interesting

Will it be fine?

unrelated but, this cord came with the mobo and I never figured out where to use it

[heavy ravine]

That is sata data cable for ssd, hdd, odd devices etc