dim loom
Currently, when they plug in their newly built pc into their monitor it doesn't work/display anything. However the power and all seems to be working fine. This yellow light keep appearing.
We've unplugged the ram
Unplugged the fans
Unplugged the graphics card
still getting this light
reef turret
you dont have ram in system
dim loom
We've unplugged the ram
just to test
before even with ram and everything in
it was appearing
reef turret
ok 1 stick of ram in far slot
just cpu montherboard/ power to cpu eps and 24pin
and am5 can have very long ram training
aka let it stit for like 5 min
dim loom
We waited over 30 minutes and nothing appeared
not even bios appeared
The monitor never even found a connection
reef turret
Currently, when they plug in their newly built pc into their monitor it doesn't ...
what cpu
reef turret
may not have have the bios update
dim loom
Still doesn't make sense why his pc isn't showing a connection
like at all to his display
The pc boots up and we tried different monitors
reef turret
The pc boots up and we tried different monitors
?
dim loom
Apologies I am not very pc knowledgeable haha
So ill try to make more sense of what we did
reef turret
The pc boots up and we tried different monitors
so it post
dim loom
Currently when the pc is plugged into a display the display shows no connection no matter what display we try
and this yellow light has been on
reef turret
and this yellow light has been on
that not boot
ok 1 stick of ram in far slot form cpu remount cpu check eps cable for cpu in right check 24 pin and try like that
reef turret
ok 1 stick of ram in far slot form cpu remount cpu check eps cable for cpu in ri...
and send image of the board in the case once you have done this
dim loom
I am gonna be entirely honest, I don't understand what you meant.
Do you mean you want me to tell them to plug in 1 ram stick to the far slot?
reef turret
Do you mean you want me to tell them to plug in 1 ram stick to the far slot?
yes
only way you can get to boot is ram in system
dim loom
Ok, he is doing it right now 👍
reef turret
send image of all in cases
reef turret
Ok, he is doing it right now 👍
you even there
dim loom
you even there
I aint there in person, I am just in a call with him.
We've been doing research for the past like 2 hours
trying to solve this issue lol
reef turret
I aint there in person, I am just in a call with him.
🤦
can you get a ok image of board in casse
dim loom
can you get a ok image of board in casse
Sure
one second
let me ask he is struggling he plugging everything back in
lol
reef turret
let me ask he is struggling he plugging everything back in
only 2 cables the 24pin+ 4 or 8 pin EPS for debuging
dim loom
@reef turret
@reef turret
We got the screen working!
Now what should we do?
Screen updated to this
reef turret
good it posted
reef turret
did you plug a fan/pump into the cpu fan heaeder
dim loom
did you plug a fan/pump into the cpu fan heaeder
Sad update but it went black again
reef turret
Sad update but it went black again
?
dim loom
the entire screen shut off and now the pc isn't being detected
reef turret
the entire screen shut off and now the pc isn't being detected
what mesage
reef turret
what did you do before that
dim loom
Nothing we legit hadn't touched anything
it just showed this message
and now its blank again
and can't find a source
pc is still on and running
dim loom
I thought the same thing lol
reef turret
I thought the same thing lol
in what wau
dim loom
Also he believes its is GPU
cause his gpu doesn't boot up
properly when he powers on the pc
it takes a bit to catch up
reef turret
what are you going on abou
reef turret
did they get back to the bios after powering off and on
hang on 0805 dose not supprt 7800x3d?
reef turret
1303 is the one stated on this site
reef turret
its back on
F1
reef turret
stop taking images of only 50% of screen
dim loom
stop taking images of only 50% of screen
Like i said earlier I am in call with him
face time
you know?
reef turret
and where is pump pluged into on motherboard
reef turret
Its connected to the aoi pump
well you can disable the cpu fan warning
dim loom
well you can disable the cpu fan warning
How can we do that ?
reef turret
How can we do that ?
with the settings
dim loom
with the settings
Ok ill try to find it
unless you might know where it is
cause we kinda just clicking around haha
