Just installed 2 8gb sticks of 2400 mhz DDR4 (used SK hynix) I previously had 2 8 gb sticks installed of 2 different brands but im pretty sure they were both 2400 mhz. Upon install and restart, motherboard (Gigabyte GA-AB350-Gaming 3) beeped 3 times and restarted, did this twice until it booted up fine. Task Manager is reporting on the side menu that only 16 gb are available but it also says 32 gb on the top right. It is also claiming that 16gb is hardware reserved, Chat GPT 4 is saying that is is abnormally high. Any ideas on where to start trouble shooting this?
#Just installed more RAM, Windows Task Manager still reporting old amount.
1 messages · Page 1 of 1 (latest)
what cpu
ryzen 5 2600x
send cpu-z spd tab
lemme install it
other kit as well
ok thats odd
odd is scary :(
just stupid corsair
xmp when its 1.2V and the priamry timings are looking jedec
msconfig?
sorry, not super well versed in the "software side" of things. want me to open system config?
ok if you have not messed with msconfig dont worry about it power off then enter into bios
Ok I’m in bios
what dose it say about ram detected/spd
The only thing I can find relating to memory is “advanced memory settings” with this info
boot into windose
Ok
Saving and exiting and when it started up it beeped three times and power cycled twice before beeping once and restarting. Boots into windows
Weird
i have a hunch
I like hunches
What is gb?
gigabite of ram
Task manager is reporting the same
Wait
I think I messed with my virtual memory in the past
Can thst affect this?
?
like giving the windows file that handles some memory buffering more storage
send image of settings
change it back to not custom size windose dose good job it self
i messed with it once and it made windsoe hard crash when hitting it
gonna restart
The beeping seems to be only when booting from bios. Task manager is reporting the same
Gonna try reseating the ram
Probably should have done that before….
remove both stick of channel with corsar ram
try this
I did
did it boot
check windose GB
or motherboard dose not compute with 2DPC
try both of stick in system but using both channals
so thats ram config in ths image
ok
try each of sticks in slot far form cpu
one at a time right?
only 1 stick can fit in slot a a time
qestion did you have ram in those slots befor getting new ram
They were on the opposite slots
The black ones
So no they were not in those slots
Ok I think I figured it out, it won’t boot with one of the two
Guessing it’s bad
Weird that it was reporting 32 gb at some level
Instead of just 24
And why it was capped at 16
ram can be dead but the chip that keeps info about ram is other chip
some ddr3 ram for overclocking can have chip die and you can mod spd to only have one of 2 ranks run
IDK
Hah I know, just one of those mysteries huh
sub par but will be duel channl