PC lights up but no display

[reef sky]

Hello I built a ryzen 5 8600g system with 32gb ddr5 7200mhz and a b650 asrock lighting wifi.
When I turn on the pc it lights up but no display on the screen. It stays on but no display on screen. Motherboard has 2 solid red lights directly next to eachother and the manual says it is for cpu and dram. There is no gpu should go off of the integrated. I reseated ram and tried different slots. I plugged a gpu into it and got the same result. I also did update the bios for this cpu still not working just lights up and stays lit up but no display

[jagged yacht]

reseat the cpu

[reef sky]

good Idea but I want to try other options first bc it is a lot of effort removing all the shit and stuff

[mild ivy]

Reseat ram

[reef sky]

I did and it had no effect resetting cmos did not work either

[mild ivy]

You need to reseat the cpu that’s the only thing left that would make a difference

[reef sky]

ok I will do that but I do not understand how that would change anything since it locks in place in 1 way only

[mild ivy]

Make sure to check for bent pins in the socket

You reseat because it’s possible that some of the pins are not making contact with the cpu

[jagged yacht]

Lga sockets are somewhat known to have mounting issues

[reef sky]

its my 2nd lga system

[jagged yacht]

1 pin not contacting can be anywhere from fine (just a ground pin) to a non-working memory channel or pcie slot to a post failure

[reef sky]

main rig is 7800x3d

good to know

I will definitely reseat that

[jagged yacht]

It’s less common on consumer desktop, but not impossible by any means

[mild ivy]

Happens a lot on rectangle CPUs like intel 12th 13th and 14th gen if they don’t have a contact frame

[reef sky]

ok I reseated the CPU unplugged all other things tried both sticks of ram separately and in different slots did cmos reset 2 bios updates

and still just getting CPU and DRAM light

[mild ivy]

It’s possible you have a bad cpu