#Fan issue

1 messages · Page 1 of 1 (latest)

tall magnet
#

what kind of fans? 3 pin or 4 pin

#

also is the splitter 3 pin or 4 pin?

#

can you change the header to DC control instead of pwm?

#

yes

#

they are still dc powered

#

and DC control means that the voltage is changed to adjust the speed instead of the pulse width

#

(pulse width modulation is what pwm stands for)

#

the motherboard does it automatically

#

go to the bios and try to change it to dc control

#

if its not already that way

#

pic plz

#

can you use a phone to take a picture?

#

Search for “fan”

#

Ok go to smart fan control

#

Biostar is ass

#

They need a search bar

#

Can you recalibrate the fan detection?

#

Or look at fan control mode

#

Ok go to control mode then

#

On the one that’s not controlling itself

#

Can you select the “4 pin” box in the middle of the screen and change it?

#

….

#

New fans

#

Because your motherboard sucks and can’t do 3 pin control 💀

#

Mate they’re like $30 for 3

#

Better than a new motherboard

#

I mean you could just let them run at 100%

tall magnet
#

Can you take a pic of the splitter

#

Yeah, that’s called the “tach” pin and it detects the speed. All splitters have a “master” fan that controls the speed of all other fans

#

Anyway, since your motherboard has no dc fan control support, either buy new fans, buy a new motherboard, or live with the 100% fan speed

#

Nope

#

Fan controllers rely on pwm support

#

you can try that

#

worth a shot ig

#

and you'd need a $5-$10 hub or splitter

gaunt kestrel
#

np