is the ram 3200 showing in the total ram and just not letting you pick the xmp
#Kingston Fury Beast Ram Issue
hollow sand
dont expect xmp to work at all
i best gess is is it check chanel A1 for xmp then B1 and so on till it finds a xmp in the spd
heady rover
is the ram 3200 showing in the total ram and just not letting you pick the xmp
You mean like, is it showing like 16gb? casue yeah it is.
hollow sand
one i dont recomend useing xmp in your case since mixed ram
2 best to manual set things
heady rover
for number 1, but it is possible to use xmp with mixed ram speeds right? just not recommended
hollow sand
for number 1, but it is possible to use xmp with mixed ram speeds right? just no...
like i give is a 5% chance of working i dont recomned and xmp has shit timings
heady rover
i guess but i just dont wanna mess around with the timings cause i might cause some issues
hollow sand
for number 1, but it is possible to use xmp with mixed ram speeds right? just no...
and for reson 2666 xmp is showing but not 3200 is most liky its just reading 2666 and not the 3200 due to only looking for one xmp
heady rover
damn
hollow sand
try swaping the sticks around
heady rover
i did though
its reading 3600 mhz and its showing 16gb
hold on let me restart
It's in dimm a1
And the other is in dimm b1
hollow sand
that correct
3200 cl22 thats the rated speed
its not a xmp bin its a jedec bin
jedec good xmp bad
heady rover
So it's good?
hollow sand
its acting like it shoud
hollow sand
the 3200 ram has no xmp
heady rover
Damn it said it had xmp in the packaging though
hollow sand
not being xmp is a good thing
hollow sand
so you got this new ram for the GB
heady rover
Well
I mean
For both speed and gigabytes I guess
I was expecting for it to have xmp but yeah
What about the other ram, how should I adjust the speed manually
hollow sand
well thats going to be a messy manual oc since
resons
read this and get a headache
heady rover
Ok, just wanna ask one question, if I set the ram speed of the other ram (2666mhz) to 3200, and not adjust the cas latency and other stuff, would I be fine?
And would it be running the same performance or do I have to adjust the cl's
hollow sand
its messy
if you enable xmp your other ram may not be able do the same tcl
or trcd
1 off the 20+ timings
or it may not like the voltage of xmp
my advie is keep it at jedec speed and deal with it or go down the ram oc rabit hole
heady rover
Yeah that's the problem, when I reseated the 3200 MHz ram to dimm a1 and the 2666 MHz ram to dimm b1 it just removed all the xmp options
hollow sand
i dont recomend useing xmp
heady rover
So oc it is
heady rover
Can't I just adjust the speeds or both
hollow sand
well you can
heady rover
Would it Increase performance or Do i have to adjust timings
hollow sand
timing x mhz x other cpu thing=perfomice
just incresing mhz can make the ram timings very bad
hollow sand
thats why i recomend to use jedec
heady rover
do u possibly know why its taking 3,0 gb hardware reserved instead of 2?