#issue with usb 3.2 | aurus Z790
1 messages · Page 1 of 1 (latest)
AX
Socket 1700
It came off f_u32
Whilst i was trying tk take out the vable
issue with usb 3.2 | aurus Z790
And how do i turn on the pc eith screws
And is thks normal?
When i turn in my new psu i bought yesterday
This purple light
Pld
is that a spark ot light
my thing is stuck on this thing
very descriptive
thats the usb 3.0 that comes from ur pc case
and it has a usb 3.0 housing that was ripped off of a motherboard
oh shit i didnt see that
@solemn zephyr is that from your motherboard?
im guessing it is, which is quite unfortunate
lets hope its the rubber cover instead
no idea
is that bad?
yea
fuck
cant i just put it without the casing
or put it together cuz the casing is on my cable
probably not. when that happens, the pins usually come with the housing
the housting ripped off though
pull the housing off of the connector and look at where it would connect
yes, and when that happens, the pins usually come with said housing
the thing is its really really hard
i tried
i cant take it part
its harder than a 1x1 lego while being oiled
and after i get it of for example with your pliers, i just put it back where it was?
it wont go back on unfortunately
could you take a picture of where it was connected to the motherboard?
or here on the plan where is says f_u32
yeah.....thats not going to be a usb 3.0 header anymore
you wouldnt have to
than i would have 8 ports not working
well the two above, 7 on i/o so 9 my bad
no, the font panel usb will be the only things affected by this
but the front doesnt work nor the i/o usb 3.2
wait wtf
you were right
all io usbs work
it dint work earlier
so i geuss my 2 one here just dont work
only thesder
what case do you have?
sharkoon
oh
uh
1s
imma give link
this one
but without the restar button
so 2 usb 3.0 ports
oh so that header is for the case
yes
w