#Playing games causing pc to crash completely
1 messages ยท Page 1 of 1 (latest)
Most games run better with 16 gb
You could also try doing a fresh install of windows
The ram speed yeah amount won't make a game crash
Try putting the ran down to about 3600mhz or lower and see it it helps
Beam I completely fine with 8gbs of ram
Also try both renderers
Vulkan an dx11
Is it only happening to beam
Read the post???
Seems like it
And it's not like beam to be completely unstable
@woeful lichen try vulkan mode, if that doesn't work boot up the game in safe+vulkan
Memory instability maybe
Is it in an xmp profile or custom?
And is the 6650xt the first gpu to be used in that pc? If it isn't did you ddu before getting drivers?
Go down to 1.5v
And just try run stock
I assume cl16-16-16-32 @3600
No. Just run stock
Xmp might make it shit itself more
Do that then
Run memory test
Run prime95
See if either spit errors
CPU overclocked or overheating?
screenshot task manager showing all resources
That message is saying you have no memory available
8GB of RAM total?
You have 250M remaining and the pagefile is over 80%
So beam.ng is failing to allocate a memory page
see what is using your memory right nw
interesting, taskmgr disagrees with how much is used.
There shuold be a page with more memory details
Close discord, steam or something else.
I think for now, 8GB = no game
windows generally doesn't handle low memory well
I'd look at every program running and see if you ened it running
And I'd want to know why 24GB of pagefile is in use
that is A LOT of pagefile
you can dig into that
process explroer
Boot safe mode, run prime95
does that run stable?
They look fine.
Is this safe mode?
If running XMP you should be OK. I think OCCT has a memory tester. Else memtest86 on a USB key.
but I'd test memory and CPU in safe mode
remove other variables
Revert to that then
If there are errors, go back to basics and work up from there slowly
So if full stock is fine, then try RAM timings. See if those are fine. etc
and use process explorer if you get high memory usage to see WHAT is causing it
24GB pagefile use still seems off
this was happening to me with beamng in 2021 with 16 gigs of ram i9 9900k 2060super. i switched to 32 gigs and it solved the problem
I had that problem with warzone and beamng. The other games like apex and overwatch played fine though. After switching to more ram I had no problems
I also had a problem in early 2021 where my i5 9600k was bottlenecking my gpu and I switched to the i9. Had no problems for almost a year then I had the problems again and switched the ram
Idk what die i have but its 3200 cl16
Dang yeah that sucks
Luckily it sounds like your upgrades will be pretty cheap especially with how cheap ram is
I'd do the ram first just incase that fixes your problems. Could save money if its just the ram
Nice nice
I spent like $150 on 32 gigs in 202/ early 2022
2021/2022*
Very nice
Well I'm going to bed but good luck
Decrease your page file
I've seen this before
It's a page file error usually
And it might be worth bu1yimg another stick of ram
@woeful lichen
I'd say even 4 more gbs of ram will do
Fair
Try to find another kit or a stick
Why 4400 tho?
Just get normal 3600 cl16
Ahh
Klevvs bolt series is good tbh
They're like 40 bucks for 16gb of 3200
Ye seems to be
Go ahead and get it but I wouldn't expect any higher than 3933mhz out of this
I'll be ocing normal uncovered dimms kek
Loke no heat spreader since they're a bit cheaper
Hope so
Why would pagefile size be the issue?
I have no real idea but I changed my page file size and got this exact error
Increased it from 4096 to 6128mb and beamng acted similar like what's happening here
Google it
I only say that as I forgot how to
Change it to like 2048
Or 4096
How To Properly Set The Windows 11 Paging File
Virtual memory is a critical component that allows you to remove and store less often used changed pages from RAM to the hard drive. Your PC will prioritize RAM for the processes you use the most with this functionality enabled. This will help your computer run faster. Your system will not run out...
Try 2048 or 4096
You have to restart to apply it but I just wanna see if it works
Page file?????
What the fuck?
Wait 1- only page your c drive
2- 4096mb max
Remove the page file off d
The c drive is THE.ONLY.ONE supposed to have a page file
Idfk just delete it and give 4096 to the c drive
Or just let windows manage it by ticking that option
That's set by windows yes?
Nono
Drive size doesn't matter at fucking all
As long as its not full
Just do it manually
Set min to 4096 and max to 4096
Tgats way too big
It could be the reason it's crashing actually ngl
Why does it say 11 gb page file
If its running out of memory just set it back to 20 gb
Wat
Bitch just dump all important shit onto another drive and reinstall windows I swear
This 11 install is being a goofy goober in a bad way
Why?
What the fuck
Want to save yourself the hassle?
Enterprise explains why the page file is so huge, it might also be the cause kf the problems
You have 2 drives right? Dump the games onto those
I get the slow wifi pain dw it took me 3 hours just to download hl2 
Wait what
Get new deditcaced wam
You have a 6650xt?
Wait how big is it ๐
Like length
The 6650xt
Sad
Mightve bought it off you if it was 7 or less
Ahh
I gave a 2060 super on the way
But nothing to like put it in yet
Haven't got the money for the rest of the pc yet
Is it less than 190mm?
Then no
Also a 2060 super is like a 3060 8gb basically but here like 150 eurp cheaper than even used 3060s
Oof
Just get new ram it's way more important than a gpu
40 bucks?
Oh ok
Wait I thought you was like 20 or sum
I thought you were a rich guy idk why I always assume so since most ltt dc members are
Oh shit
Same but 2 years older and practically no income aka 40 euro a month
It doesn't explain why the PF usage was 24GB.
Just get a new kit if you can
Beam isn't supposed to use more than 3-6 gb of virtual memory
At least from experience
Damn
Do you have the RAID set up to AHCI instead of RAID?
Intel RST is software for the shitty motherboard RAID iirc
If you can still boot Windows, then likely it's fine. Changing RAID/AHCI modes after Windows is installed requires extra steps beyond just the BIOS change. You're probably fine.
Wait what? Is everything OK?
Didn't realise that there was a fire at your house
Hope you're ok
install windbg, open mdmp and see what module bugchecked.
Hi @storm pecan could you look into my thread please? https://discord.com/channels/375436620578684930/1177089842463658064
mini dump (missing stack info and such). I always forget that blue screens just create full dumps
Either way, load that DMP file into windbg and run "!analyze -v"
Don't come into someone else's support thread like that.
Check what the critical is I guess.
It's a ^*(&ing awful debugger that I do NOT miss using but...it works here.
I apologize
Granted, my usage of it was with internal symbols. Still, I'm hoping the analyze command gives some useful call stack info
The DMP should still be present
it's only removed when there's a new crash IIRC
Well, new one will still be interesting
There should be a load dump option in the file dropdown I think
Run windbg as admin
!analyze -v may take time
.bugcheck will also tell you the bugcheck code
including the period.
its a ram issue
could honeslty be your board
heap corruption is memory errors
like the slots or even the cpu itself
did you try swapping slots?
wdym? do you only have 2 ram slots
do you have your board still under warranty? or was it 2nd hand
likely you could rma if u do
cpu you mean
it could seriously be a cpu issue
did you try it in a different pc? the gpu i mean
doesnt matter if you oc ir not you couldve just gotten a hot heap of shit silicon
fair, test the gpu on there, oh and also do a clean windows install too before you resue the drive
im talkign about the i3, its most likely its fault everythinh is failing
is it amd?
windows doesnt really like platform cahnges for cpus
you could pull the win key tho
wait
this could be the problem
legit it could
if you never reinstalled
still
try a fresh windows install, see what happens
if youre bothered transferrign shit overnight
i downloaded windows overnight using their tool, i have 200kbps avg so
maybe there were some spikes to 12mbps but still
imagine
like i can even ddos
Wow...I thought the days of slow internet were done
Do you have dual sticks or single?
Hmmm
Do you reset the CMOS battery?
As I can read the chats. It seems like a mobo to me but try to swap the rams (it is easier to check).
If you read further you'd know he bought a new kit recently
Yeah, new kit and one of two dimms was DOA
So he is getting dram light with new kits?
only started recently
new kit did boot before
So his pc is booting up with new kits?
until yesterday it was
So it's not booting anymore!?
now its dram error
@woeful lichen (sorry for the mention)
If you are using two sticks then I want you to remove one stick and check if your pc boots. I think your XMP is enabled so with new kits it won't boot up. Boot with one stick go into bios and disable it or just remove CMOS battery for 1-2 mins.
the did that already lol
we tried everything posiible
Then it all comes to your mobo.
Black BSODs don't give much information.
For how much time you removed the CMOS battery?
wow smart man we concluded that 2 days ago
We all give our opinions here brother. You do understand it can be anything right?
its the board or the cpu causing the issues and as some slots dont work at all we supposed its the baord
Then to be honest with you I recommend you to seek professional help.
They will do troubleshooting and it will save your time and money.
i swear u just tell everyone to waste money on something they might not have
hes getting an x570 and a new cpu for free soon lol, no point saving that 13100
When you saw me giving that advice? ๐
right lol
Good luck my brother ๐ค
wanna donate your cpu ๐ ill gib you 65 euro for it
still a 3600x is good
awh, im stuck with my shitty i5 then
oh fair but it is technically yours
oof
what lappy