hollow urchin
hello, Recently I change some settings in my bios, I enabled the Secure boot and disabled the Legacy Boot in my HP Z440 Workstation. But After that it beeped 5 times and Red light. After getting that this is a ram issue I changed the slots, Now there is no beep or red light. Everything looks Normal. but no display output. I tried to cmos reset. Removed the cmos battery, But no luck.
My PC has Quadro 4000 GPU. I tried every type of Cmos Reset but it didn't Help.
tacit bison
ok so the basic
have you tried a different cable
hdmi displayport ?
next maybe reseat the gpu
tacit bison
hello, Recently I change some settings in my bios, I enabled the Secure boot and...
btw what is the motherboard and the ram ?
also try to boot after disabling secure boot
and see if there is any display
hollow urchin
@tacit bison There is no display at any point, So I am unable to go to the bios. Motherboard is HP Mother board.
tacit bison
<@866722526012506163> There is no display at any point, So I am unable to go to ...
have you tried another cable or display ?