#Need help with windows installation
1 messages · Page 1 of 1 (latest)
I’ve also checked the psu cables and it seems fine so I dunno is my mobo dead?
pc is not posting
Likely not the CPU. When my system did this, it wasn't recognizing any RAM, so POST Stalled at the CPU check. Refer to your motherboard manual when reseating RAM, and do so one module at a time.
I've not heard good things about asrock, especially with AM5 so you should definately look into your motherboard more
have you tried booting with a cpu cooler?
I did
It showed me the inital red light
But I can try again just give me a moment
Regardless would it just not post though if there is no cpu cooler?
@opaque basin
I don’t know about that, just making sure, some mobos refuse to post w/o a cpu cooler installed
no worries, have you tried reseating the ram / one module at a time just like this guy said?
Also, have it ever worked before or it’s a new non-working build?
Make sure your mb bios is up to date
New
Okay
Now its blinking staying stagnant on the cpu but now blinking on the ram
And lol, I realized that the ram was not seated properly at all, When I first built it
But I reseated it properly put on the cooler and now its doing this
For the bios I havent done anything yet should I press the bios flashback button and see what happens?
that doesnt work like that
what’s the other cpu uve tried to boot the system before with
Haven’t don’t have any other cpus to try/ use. first time builder here
what you’ve mentioned here then? Oh you mean uve reseated it my bad
Same one
I got a replacement
Thought cpu was dead on delivery
Im a noob so I didnt fully realize
That ram had to REALLY be pressed down
the cpu debug light doesnt always mean that the cpu is the issue so yeah
as long as u hear a click should be fine
Yeah I didnt do that until today
.
I did
I think. Does that mean putting one in, turning the pc on and waiting
I did that I just put one in and waited 2 minutes
what kind of psu u got? is it modular
Oh lord you have 4 modules
On am5
That’s going to take awhile to train, do 1 module just for it to post
Oh someone already advised
I see how long should I wait for the 1 module
Not long
Like 2 minutes?
I’d just give it 5
If it’s not up by then we’ll move on to other solutions
Keep this picture in mind
If teeth are showing anywhere give it a extra push
Psu side or motherboard side for anything
Good deal
check the same thing for the cpu power cables, just in case
But do be aware none of your ram is locked in unless you were about to take it out
Good good
Yeah I didnt realize that my ram was not seated today
At the time of post which was 2 days ago
ah
I did not know you had to really press
Still no sign of life?
Okay turning on and gonna wait 5 minutes for memory to train
O
So the cpu light is red stagnant, and the dram light is red but flashing
So its just training the memory then?
anyways
Yea give it a bit it should hopefully turn on
That sound kind of hurt
Let us know what type of ram uve got there
this is the build btw for some context
Part List - AMD Ryzen 7 7700, GeForce RTX 4070, Montech AIR 903 MAX ATX Mid Tower
also its been more than 5
still flashing red
With only one ram stick in ?
Yea

I see
No more
No more what?
Is ram dead or mobo dead lol?
Welp its been more than 10 minutes
What now
u can try with another dram slot and stick :D
So put the ram in the other channel?
yes
I had that idea myself am now doing that
but u can try using another stick
Whatchu mean
Can the black tab be flicked out ?
i dont think it matters tho
Yeah it can
Sweet
?
Reference points to make sure the installed ram is in all the way
:D
But I’m not too sure what the issue is honestly
The last resort I usually do is a test bench
make sure again that all the cables are tight installed properly, if out of ideas, i’d update the bios
Actually one thing
it looks like there are 2x8pins connected, but only 1x8 into the psu
nope, u need a usb flash drive with the newest bios installed from the manufacturer website
first
Oh I have that would it still work even if its not posting?
yes, u can update it without turning it on, just power through it
can u confirm this?
oh
Yea just make sure it’s fat32 and you changed the file name
Forgot what it is for asrock
Creative.rom or something
there are 2 cables coming out from 2 different holes into one single pcie power slot
am a little confused
but anyways
Chain just seems tucked away
And I’d prob just go to the latest bios
Usually asrock tells you the current one on a choke
But not sure about am5 boards
for the bios
Supports AMD Ryzen™ 7000 Series Processors; 16+2+1 Phase Power Design, SPS; 4 x DDR5 DIMMs, supports up to 7600+(OC); 1 PCIe 5.0 x16, 1 PCIe 3.0 x16; Graphics Output Options: 1 HDMI, 1 DisplayPort; 7.1 CH HD Audio (Realtek ALC897 Audio Codec),, Nahimic Audio; 1 Blazing M.2 (PCIe Gen5x4),, 2 Hyper M.2 (PCIe Gen4x4),, 2 SATA3; 1 USB 3.2 Gen2x2 Typ...
so change the file?
And then just boot the pc and plug in the usb and just wait?
I don't have to click anything or do anything else?
yup to creative.rom
no need to press the power button
press flashback button and give it a few it'll turn on by itself
So after the 8 type in creative.rom
So it would be B650ESL1.28.creative.rom
Just to confirm
the whole file needs to be renamed
yup
Aight for the ram should i leave the 2 in
yea just make sure a2/b2 aka 2 and 4
Hey it stopped blinking should I just remove the flash drive?
the bios button, it was flashing green then stopped
yea did it turn itself on ?
That’s weird
Alright what about just one ram stick in slot 2
After this we’re going to have to check the cpu pins
There's pictures above
of cpu pins
But try and bios flash it again and just do it with one ram stick?
Yea slot 2
Yup
They don’t always turn on when it stops or is steady it’s prob done
I see so when the bios flash button stops blinking green its done?
Yup
Either or prob would take it out
Still red
Could your take your cpu power out and show those to me ?
Like turn off the pc and show the plugs to you?
Yup
Looks fine
So huh
What now
Pc repair shop?
maybe my ram is broken
I’ll take some photos see if you can see something I cant
That works
Thats 1 ram, the one I just used for the second attempt of 1 ram and bios flash
I also used it for the first attempt when I tried 2 ram sticks
This is 2
This is three
How about a a quick look in the slots too with flash on
And you said when you tried to boot the dram and cpu lights were on ?
Yeah

I’d hate to send you to the shop cause it can get pretty pricy
But I’m not sure, only other things you can try is doing a test boot (taking everything out the case) or trying to play with the ram and letting it sit
IT WORKS
SALVATION
THANK YOU SO MUCH
ID KISS YOU IF I COULD
okay
Excitement wave over
What does this mean
Since im trying to update the bios
Also lol
Ram still was not seated correctly
I didnt click in both sides of ram
Also there’s only 2 ram in right now
Can I just plop them in or should I wait a bit later
Im an idiot nvm
I just realized we already update bios
For the windows key that I have
do I also need to change the file name?
Im trying to download windows
Since it says this
@strong bay
Oh it works woooo

reinstall
Oh okay so delete the windows installation media and do it over again?
on the original flashdrive
I tried reinstalling the windows installation media
It still didnt work said the same thing
you most likely have more than one drive installed
if that's the case disconnect anything that's not the o.s drive it will stripe the data
unless you mean you're trying to boot to the flash drive and that's popping up
I’d prob try another flash drive when possible
If it’s priority #1 in the boot order or you selected it from the boot menu it should go right there
Okay
Im not sure how to set priority in the boot order
Where do I go
Also I just clicked on the easy mode(f6) and my ssd is detected so I dunno
I went to the boot tab and I dont know what any of this means
@frank galleon Need any more help?
Yeah
Still trying to figure out windows installation
I was trying to find out for the boot priority for the windows drive but unfortunately for me there is no easy “click here to set priority#1”
@sly brook
Need help with windows installation