#Micro sd card not recognized by my security camera
1 messages · Page 1 of 1 (latest)
no clue how you connect it to your laptop
do you use an adapter?
if you use an adapter it could be the cause 🤔
since that has a slider which allows read only / write access..
I searched for the documentation and in FAQ says this
Q:Why the device cannot identify SD card?
A:It is recommended to insert and remove the SD card after power off the device. Check if the SD card is
under normal service conditions and the format is FAT32. The App shall suggest ""could not find SD card""
under unstable network of the mobile phone or the device.
I leave it here if you wanna check it yourself https://www.manualslib.com/manual/2413025/Pni-Ip230tlr.html?page=7#manual
yes, I used an adaptor
The SD card is currently write protected (I think), might this also be the problem? I will try what you sent
Picture of adapter?
Sometimes it has a slider which puts it in read only
I disabled the slider
My first guess was gonna be what elpeque mentioned - It likely is expecting a very specific format (FAT32 in this case). Cameras and computers are smart enough to reformat, but often simpler products aren't capable of doing that
and still, write protected, I tried like 4 methods to disable the write proteciton, still no
Show the adapter?
Did you reformat to FAT32 on your computer?
Used software, tried regedit, tried cmd, tried another software
cannot reformat because of the write protection
for some reason, one of the cards is fat32
Do you have another adapter to try?
no
Sometimes those switches can get stuck
also, I tried on a old laptop ~2015
Yeah would say get a different adapter
Might change the world
And are not as expensive at all
Also, I did not power off the camera when I inserted the SD
Yeah got a different adapter?
I'll ask some people
Thats write protected which is when the switch is pointing towards the arrow
i had an old 2gb sd card and it didnt get detected until i reseated the card
Both switch states aren't working apparently
try reseating the sd card on the adapter
If your phone has an SD slot you can read the card there
Try with that first if you can
I'd bet that the camera simply ain't compatible with that capacity of SD card.
SD cards are divided into groups.
SD = Up to 2GB
SDHC = Over 2GB up to 32GB
SDXC = Over 32 up to 2TB
SDUC = Over 2Tb up to 128TB (pretty sure there are no SDUC chips currently on the market)
This means the "Micro SD slot with maximum capacity of 128GB" statement is nonsensical, in order to support 128Gb it needs to support SDXC. If it supports SDXC it would have a maximum capacity of 2TB not 128GB.
TL;DR probably only supports SD cards of 32GB and lower.
Got a different adapter
And ill try again to format the sd card
What would be the best/fastest option to format the sd card to fat32? @everyone
Minitool Partition Wizard it's a good option in my opinion.
The sd card is write protected, i cannot remove it
I tried everything
Again? The new one too?
Yes with different adaptor
I dunno why, but one of the 2 sd cards is already in fat32
And still write protected
I dont have a smaller one
The guy im trying to fix it bought 2 x 128 gb
For two security cameras
Dont have different laptop
Your phone?
Doesnt have slot
😢
My head hurts so bad
I'm sorry by the fact that I can´t help you T_T
Try to search for that issue on reddit
Yea well there isnt really anything to be helped with
The problem has been solved, apparently it worked just by powering off the device, then inserting the sd cards, also the format of one of them was not fat32, and it still worked, no idea. Thank you all!
I told you to turn it off first
But NICE its finally solved XD
New problem‼️: The security camera owner called me and told me that he can only rewind 1 day, why is that
sounds like something the manual could answer
