DRAM Led

[spare kayak]

did you check if the dram slots are clean

[twin maple]

Yep, they look pretty clean, board is in good condition aswell

[spare kayak]

have you checked what the supported ram is on your motherboard

maybe even look at the manual online to see what it could possibly mean the red light

[twin maple]

I know it’s DDR3, sorta assumed anything might work. I’ll look into it rn

[spare kayak]

could you also tell me what the name of your motherboard is? Is your ram clean, do you see any black spots on the connector?

[twin maple]

ASUS P8H67-M PRO REV 3.0 H67 DDR3 SATA 6Gb/s Socket 1155 Micro ATX Motherboard is the motherboard

my ram is clean, I tested it in another rig

[spare kayak]

what's the speed of your ram?

this is what I found

btw your motherboard only supports a total of 32gb of ram and ddr3 1333 or 1066 mhz ram

[twin maple]

Thats whats kinda tricky, I tried memok and it doesn’t seem to work, still no post. I saw a reddit thread stating the same thing and thats why I was led to think it was maybe bios.

Not sure of my memory speed off the top of my head, will check that too when home

[spare kayak]

ok you should check cause I'm pretty sure that's the problem

[twin maple]

gotcha, can it’s just those two speeds, nothing in between?

[strange kettle]

My pc does that sometimes after I take the sticks out and put them back in for whatever reason

Have you tried reseating?

[twin maple]

yeah, even tried all the dimms

[spare kayak]

I don’t think it can be anything else than those two or else they would tell you, just like with my motherboard

[twin maple]

Turns out it was a combination of a bent cpu pin (thanks ebay) and incompatible ram speeds. Will return the mobo to the seller and find a new board. Thank you for the help!!!