So I got some new ram and installed it into my PC but I had to take out my Noctua CPU cooler in order to do that. The thing is, once I lifted my CPU cooler off, it also took the cpu with it.💀 Now... I've tried taking it out and putting it back in many times but it just won't boot up. ( I looked at the pins on the cpu and yes some were bent but that didn't really affect it before) Please help me.
#[URGENT] PC won't boot up
1 messages · Page 1 of 1 (latest)
Cpu is dunzo
Does your mother board give out a error code
Not always
A little tip for next time, twist the cpu cooler to break the thermal paste loose before trying to pull it off
Doesn't even boot up
What mother board do you have
B550
He means a light on the motherboard
Light shows
What brand motherboard is it?
Describe
Gigabyte
fix the bent pins
What is the light like
Is it flashing
No
Post a picture
Okay
It is memory
Make sure you here a click
Ok try reseat the ram 1 at a time
Hmmm try boot without cooler into bios but not for long
very
😦
do you not have a light on your phone you can use?
The light eliminates the orange
the orange isn't needed right now
Oh
Dont just pull on it this time
Okay
I just clicked the Corsair on the very left in fyi
So perhaps it was the ram
mis matched ram
Yeah, thats not good
Someone said It would be fine
are you running with an AMD cpu or intel?
AMD
yeah don't do this you should be using 2x8 or 2x16 if you need 32gb of ram not 4x8
😦
it will be far easier to xmp the ram as well
yeah it should still boot
yee
Got it
keep ram in pairs
if you need more capacity sell the old ones buy 2x16 and be done with it or 2x32 if needed
I would remove one of the kits and keep it as a spare in case one of the sticks of the kit that you keep on the motherboard fails, or what was said above
I'll probably replace them with 2x16 ballistix in the future
what specific cpu do you have from AMD?
5600x
3200 speed ram at 2x16 cl16
Okay
Back to what we are here for, did the computer boot?
Any signs of life?
No fans spinning or anything
Only the motherboard turns on
I didn't remove the ram
Just made sure they were in
Make sure everything is plugged in and the switch on the psu is turned on
only use one stick of ram
Alright
just to test to see if it posts
if it posts in slot 1 test in slot 2
so on and so forth
Maybe switch the ram around as well?
Do what was said above with all 4 sticks
No
test with one stick in all four slots then switch to another stick
If it posts the with the first stick on all 4, that eliminates the motherboard
do the same with that one
And leaves the ram as a prime suspect
Push down on the stick, then try it
not too hard though
Wait, on some mother boards, only the top of the ram slots have the locks
Indeed
Im guessing you just found that out?
My motherboard has that
Ok
Ok, try the other 3 sticks
fourth slot?
If it doesn't do anything with the other 3 sticks, then it may be the motherboard, CPU, or all 4 sticks are toast
Theres only 1 way to install a CPU
There are still a few other possibilities
You should make sure no pins are bent
You have a bunch of bent pins
🙂
You could try to bend them back, but chances are that they will just break off
So yeah, you are better off just getting a new CPU
What did you say this one was, a 5600x?
Yes
5600x is good if you have a microcenter or a bestbuy near you you can price match the 5700x at microcenter that iirc is 199
Oh?
Amazon price is $158 on sale
Yeah price matching is great
Not bad
199 for 2 more cores and 4 more threads and faster base and boost clock its a no Brainer and will still be decent for 6650xt
Or even a 6700 gpu
If you have a microcenter within 25 miles of you check the price on your phone for a 5700x and show it to the associate
If its still 199 I would take the deal if bestbuy will honor it
Unfortunately I don't have a micro center where I live
Yeah
Thank you for the help both of you