#lttstore
1 messages · Page 34 of 1
My gone phishing shirt has been on label created for almost 3 weeks
Mine is moving
Best water bottle
Try contacting support@lttstore.com
Windbreaker I ordered yesterday shipped! Looks like we’re back to DHL, the pure USPS shipment was fun while it lasted 😛 (showed up significantly faster than DHL, 2 business days from first scan in the US vs 6 for the last DHL shipment)
DHL seems to have no idea what they're doing, and they're making LMG look worse than they were already making themselves look...
I'm a bit biased since I work for one of the two major carriers... But nothing can excuse five weeks and still not having an order.
I hope they’re hearing us, a lot of us seem to be displeased with DHL for one reason or another. I don’t know how much of a choice they have in the matter, or if Wizmo chooses the downstream carrier, but I definitely think it would reflect better on them if DHL could be avoided when possible. That said, certainly not a dealbreaker for me, I’ll still order no matter who they ship with, even shudder LaserShip etc. but it would still be nice to have a better, more consistent shipping experience!
I'd rather they ship with Canada post.
I have to imagine they do have a choice in the carrier. It's just a matter of cost.
Paying $20 for multi week shipping just isn't a good deal.
Last time Wizmo handed over to Asendia to NZ Post. Now it seems they want to hand to DHL to Australia Post Global, to NZ Post, maybe.
Some of the more complex routes I almost get. Your end of the world is a bit wonky. But to the states, it's just inefficient.
Last time was great, straight from LA to Auckland.
It gets very weird in Europe. And those redirections cause EU IOSS or NO VOEC data to be lost.
Yeah, I don't envy anyone outside of NA trying to get things.
Knowing international shipping pretty well, the amount of paperwork needed for some countries is wild.
Other than speed, last time was great, no issues with customs or biosecurity.
For Europe it hasn't worked in years.
Yeah, I’m in East Coast USA, DHL is going to hand the package off to USPS anyway and they take longer to get it across the country and into USPS’ hands, so it’s very inefficient
In my experience the DHL>USPS handoff is often where packages get held up, though it’s been less of an issue lately. Same goes for UPS Mail Innovation and FedEx SmartPost (their equivalents of DHL eCommerce).
FedEx switched to handling most of their own during the pandemic (I work for them).
I did notice some packages being delivered direct
Called ground economy now and it's fedex end to end for the most part
Same with UPS SurePost, but not mail innovations
Yup, the DHL to USPS resulted in a misssend for my water bottle, currently for me stuck 5 towns over..
Make sure VOEC numbers are registered!
Yeah, usps couldn't handle their own volume, let alone ours on top of it.
I’ve had a not-insignificant number of packages hit the wrong post office lately, costing an extra day or two. Super frustrating.
I'm pretty sure mine is just lost.
A while back, 90% of my packages that were handed off from another carrier took ~a month to be acknowledged my USPS. Thankfully that’s been mostly rectified.
..and part of that remaining 10% would just disappear
Curious, if I don't see any more progress for a couple days, do I send a request into store support? USPS? DHL? Like who do I contact at that point lmao
A hard question to answer when DHL claims USPS has it and USPS claims DHL has it lmao
Well for me, DHL claims USPS messed up, and USPS claims it has it. Sooooo, I guess USPS? But at the same time I feel like it was DHL's fault knowing them...
Because you aren't DHLs customer, they won't help you. LTT needs to handle any claims from their end.
I'm sure the suggestion would be email support.
If the package seems stuck for a particularly excessive period, store support is probably your best best.
Gotcha, yeah I'll give it a few more days and see what happens. Only got stuck yesterday.
Hopefully it starts moving soon!
Mine has been en route to DHL for two weeks... So it could be worse.
Does Wizmo tracking reflect it leaving the terminal?
Wizmo says it departed Vancouver terminal, DHL themselves say it's en route to them.
Hmm
Does anyone know if the LTT wallet is still coming ? I just learned about it looking a WAN show, but have they cancelled it since ?
I have not heard of them cancelling that project. Sometimes these things take significantly longer than expected though...(wag hoodie was teased like a year ago for example)
why is shipping so expensive
They’re shipping from Canada, so it can get expensive. They’re not gouging or anything like that
Shipping rates in general have gone up quite a bit the last few years
that's a fair point, vancouver is not a central node to ship from in all directions
@wraith nova
wait, you guys have a shipping label ??
Apparently phishing is happening in Whittier, CA ATM.
to the surprise of literally no one, as per usual

What is surprising is that they have apparently chosen different couriers from Whittier than last time.
My package's been on "PROCESSING COMPLETED AT ORIGIN" for a little over a week now, I've read on reddit its supposed to be on the way to my country already but if so that's a really shitty status/descriptor, they should add a "On transit to destination country" status or something
Mine has been waiting on DHL to find a package and plane for almost a week
Wizmo or the couriers tracking?
DHL
Yeah it finally started doing anything today
Am I the only one that thinks the new wizmo website is even worse
What kind of merch can I get for this set up?
LTT cable ties
Contact support@lttstore.com, as even if it wasn’t moving the label should of been created
As I said, contact support, wizmo says data recieved, not label created. That indicates the label hasn’t even been made
👍
"Shipment data received" indicates a label being created, hence the existence of a tracking number. There should be a second "data received by carrier" message, that indicates the package entering the carrier's system.
Either way, 10 days is definitely excessive and support is the way to go.
My gone fishing shirt sat like that for two week I would wait a little longer
Phishing is a special case, as it was presale.
IIRC the estimated ship date was the 20th.
All my stuff from them does that it was just my most recent order
label created on the 12th, nothing past that.
Phishing?
Mine was created on the 13th, hit the terminal on the 21st and USPS on the 24th.
ye phishin
What is everyone’s current response time for support
I had a regular order ship on the 10th, terminal 13th and USPS 14th. Hence phishing being a special case.
I have never had my stuff ship that fast for me it’s alway 1-2 weeks
My last interaction with support was sent a message late on a tuesday night, and support got back to me the next day. My last order was processed on the 13th and ultimately arrived on the 19th.
my only support interaction was in 2020 pre pandemic
Ultimately, can be hard to predict as there are several entities involved in the shipping process: MIBC (warehouse), Wizmo (cross-border/origin carrier), regular carrier (DHL/USPS/etc.) and sometimes last-mile carrier. Any one of those can get backed up, which can result in extended periods without updates -- particularly during handoff stages.
i don't remember who i talked to, but they got me a replacement stealth hoodie when mine died
How did a hoodie die?
Inb4 "a YouTuber blew up my washer"
the footage was on a flipvideoHD but it broke on the drive home
It’s fun to blow up washers, but lots of shrapnel
shotgun slugs are fun
Market them as "Dummy Smart Light Switches" to waive liability of that
Useful for visualizing your future smart home and nothing else, trust me bro we didn't make it able to detonate c4
"Lifetime as lifetime of the user"
Support responded that wismo are very backed up, and I should just wait

Oh well, as long as it arrives before may 10th
i had it ordered to a job i might be quitting so i hope it comes in fast.
mfw not quitting your job just to get your ltt merch arrive
It’s here, pog
ltt store cabelties and desk mat
ever since i got my LTT screwdriver i've been trying it with bits from other screwdrivers i already own and almost all of them fit the LTT screwdriver as if they were made for it
1/4" bits are the standard
Yeah the base of bits is pretty standardised to the hex shank thing, so should be broadly compatible. Any bits that aren't are the weird things.
Let’s gooo
Same tho
I just got my Phishing shirts in. I should have looked at the size guide better though, I might have gone a size up. Either way, I need to lose some weight anyways.
I also got my CPU pillow in
And this
I can’t stop looking at the wag hoodie page because I absolutely love all of the animal models!
idk if LTT broke me but ever since i started wearing the Stealth Hoodie i'm surpressing the urge to say "LTTstoredotcom"
maybe there's something inside the fabric
and then there is the 4mm bits that ifixit uses
i acctualy have the same 4mm bits in a screwdriver i got from woolies lol
It’s their special ingredient
It’s the special ingredient from uncle Linus farm
i actually unironically mutter it to myself after using any product from lttstore.com.
Same
I do the same thing sometimes. I always laugh when I catch myself saying it. It's infectious.
Ratcheting precision driver when.
I want a better ifixit driver
I'm not sure a ratcheting precision driver would be a great idea, tbh. It's an application where you want to minimize torque.
The biggest problem with my 64 oz water bottle, not enough water in my brita filter to fill it… please fix 
Maybe we are the walking advertisement 
Walking, talking advertisements
Hell of a collection
Mines are the left ones.. white and black has seen more finnish railroad crawel than most people in finland 🤣
So you have the puny side
I just saw a Reddit post on how some guy sold his rgb pc pin for $150
Finally got an update on my tracking, though I have no idea why it's moving through Germany 
What’s your country of destination?
Argentina
Tf
Not even tangentially close 
Postal service logic will never cease to amaze me
I've read Germany is the DHL hub but I would've assumed a more direct flight/shipment would be cheaper than crossing the atlantic twice
From a friend that also seems to have gotten the same tracking pattern last month, I'm estimating it taking ~2 weeks to reach my country for real. No clue on delivery estimates after that though
You forget about the secret German teleporters they use to teleport parcels across the planet
I guess no screwdriver for me until late May I guess 
@mystic cloak your customer support deserves an A+ - worked flawlessly - thanks a lot
I just had my recent shipment arrive, magically teleporting directly from richmond BC to my mailbox on the opposite side of the country with no intermediate updates. The order just a week prior, also via canada post, had a few more updates. Now both have been early compared to what canada post was estimating, but interesting.
Canada post been having issues, think it’s to do with government workers going on strike. One of my packages containing a very rare automotive part went around same city for 6 days then stopped moving for 10. It then suddenly appeared In my mail
lmao so many government things are on strike rn. In BC the public transit is also on strike so people cant bus to work
I have only ever had 1 problem with them which was the first time I ever contacted them and they never got back to me this was in august
did you receive an automated response when you sent the email? you may have got caught up in our spam filter
I did but at this point it really doesn’t matter
😢 sorry that happened
Hey @mystic cloak, is there someone I should talk to about having team jackets based on the 3D Down Jacket made?
I looked for Creator Workshop for a bit, but didn't see anything relevant.
errr, it's plausible I should have been looking for Creator Warehouse, eh?
message https://twitter.com/nicklmg, he'll be able to give you some answers!
Thanks!
hey @mystic cloak I just wondering can LTT store state that the thing that I'm buying is a gift for my relatives to my destination country?
Unfortunately we do not provide that service
okay mate thank you for the information
Yeah! My "Gone Phishin'" shirt and my Techlinked colorblock hoodie arrived!
Truee
ratcheting ;isnt really about torque though, its about not having to release to regrip. which is kinda idea for precision stuff where you dont want to loose the teeny tiny screws
So what do you guys use your stickers on? I put one on my water bottle but I feel kinda bad covering up the design
I have this same problem where all my stickers are still in the pouch
I’ve put the lttstore.com on the bottle but yeah the rest are just kind of existing 😂
I enjoyed the use someone posted where the LTT logo sticker fit marvoulously on the top of their AIO cpu block, that looks like it was meant to be. I don't use stickers of any sort on anything myself though, so been grateful for non-sticker freebies.
My point was that you want to delicately hand turn with a precision driver. A ratchet would need to be extremely fine-toothed to work well. It’d also increase the thickness more than is ideal for precision work. IMO a spinning end cap is all that’s really needed.
I wanted the shoe lace but they were sold out the last time I placed an order!
I dont see what youre saying at all, sorry buddy
ratcheting screwdriver doesnt really have anything to do with excess torque being applied
and thickness is a concern but the long shaft of the current solves that mostly
I’m getting up there! I’ve been told that I have a problem because I wanna get a bottle in every color 🙄😂
(as does extensions as usual)
Not having to regrip enables a constant pressure level, which isn’t ideal when dealing with small and delicate screws. And as I mentioned above, the ratchet would need to be incredibly fine-toothed for the backforce to be sufficiently low — if it’s higher than the driving force, you risk overtorquing while moving back and forth. There’s also the weight a ratchet adds, which can hurt precision.
its already pretty dang low
Indeed.
Apparently Dhl told them that my uncle Linus hoodie and bottle was delivered on the 19th and I never actually received a tracking number
I've had several instances where my LTT water bottle is leaking if the threads are damp. Is this a known issue?
I have the spout lid.
Look up in your lid, is there a white/clear o-ring?
Holy crap, I ended up with 2 trust me bro stickers in my sticker pack 😂
Threads are damp because it is leaking lol but yea, an o-ring would be my first thought
If the O-ring is damaged, the water bottle isn't sealed
Honestly I’m surprised the uncle Linus bottle and hoodie are still on the website
Possibly a case of until-they-sell-out. Not explicitly labeled as limited though, so maybe they're keeping them around since they're selling well.
I’m surprised they are keeping the hoodie out I would think that one would go away
I've heard lots of good things and it's their only pullover style hoodie currently on the store, so I support it sticking around. I don't generally like commerative you'll-only-get-it-if-you-know-the-reference merch (eggshell for example), but the potato sack look might be novel enough on its own.
I was only gonna refer to the bottle because I was under the impression the hoodie was already off the site 😂
I actually double checked before I sent that message though just to be safe
Got my Uncle Linus bottles today and many many (maybe too many) bananas for scale lul
Does the store not ship to Iceland anymore ? Trying to order but having problems
I don’t recall hearing them say anything like that
So I'd love to here people's opinions on French terry style cotton. Getting the WAN hoodie soon but I'd like opinions
I really don’t have anyway of describing it but I personally don’t like wearing it without sleeves
It is really warm though
I hear it's basically like a bath towel with how it's texture is
As long as it's not a texture that makes your skin dry (like some fabric or textures can do to my skin)
I completely disagree about the bath towel it kinda feels like a cheep robe but it definitely doesn’t dry out my skin
A cheap robe huh. I am glad it might not be a problem with drying out the skin, that's a definite no. But a cheap robe?
But I also wouldn’t describe it as cheap feeling it’s just a similar texture
The only comparison I could think of
Would you describe it is rough in material or is it just the style of fabric? It's cotton either way
Yeah it’s kinda rough it’s definitely a much nicer fabric just a similar texture
That good, I sleep in a rougher blanket. It's thinner but it's warm. As long as the actual material is soft, I can get over the texture
Is isn't bad. (This is a towel lol 100% cotton)
I get what you mean by "cheap robe" tho
New shirts! And one that isn't black, woot! Buying them all
So... The sketchy T-shirt is just the limited edition to build a PC gameshow one?
Has anyone gotten their gone phishing shirts yet, I ordered mine plus a WAN hoodie on March 31 and it’s just now moving today
That all depends on where you live.
I am currently waiting on my WAN hoodie, been like 6ish days, estimated tomorrow or Wednesday
It’s very similar but not exactly the same
Here’s the limited one
The new one uses the same exact PC graphic but without the annotations
I’m glad they brought the design back, it felt underused as just a limited run
Links for the new products btw:
Yeah, I own the limited one
There going to be a pajama shirt?
have they shown anything with the upcoming cat beds? ik its been mentioned on wan recently
hi there!
I am looking for advise on how to contact customer service, having a questing on my order, which is with local customs for some time now. Is this the right channel to get in touch with an LMG employee?
email support@lttstore.com (I think) or https://www.lttstore.com/pages/contact-us
Doubt that they can help you with your local customs but you can try. If they ask for custom duties or tax, you need to pay them.
You do need to contact them if VAT has been double charged, which seems to happen frequently with European orders.
was mainly curious if customs contacted them, instead of me. First time ever i order something from Canada, ill just wait for them to contact me, or deliver my package, I just want that backpack 🙂
Which country?
netherlands
ill receive a mail from them then?
You can just enter the tracking code from Asendia/DHL into PostNL and check.
Stuur dan de BTW factuur van PostNL naar LTTstore support en krijg je BTW terug.
Email should look like this. But it may have been lost.
The email, not the parcel.
aaah, dat mailtje heb ik nog niet ontvangen
nu al 5 werkdagen in status " The customs clearance process for import into the destination country/region has started. "
Dan komt ie straks, je kan ook handmatig checken. Maar duurt soms een paar dagen.
thanks. Dan moet ik gewoon even langer wachten, hopelijk komt de tas voor mijn volgende werk trip in 2 weken 🙂
Zeker duurt het niet twee weken.
any chances we can do something about the shipping cost to Asian countries(im from India)? this is shipping on a $19 tshirt
Cheaper than EU or NZ shipping
yea but still thats quite expensive especially considering the purchasing power
idk if this makes sense but if there's enough audience from this region, is local manufacturing and delivery an option?
Nope
They won't do it for Europe even
It is a lot to do with taxes and international law.
ah that's disheartening
any chance i can get the full quality designs so i print it myself?
Probably not going to happen either
:// nvm then
That's actually impressively cheap for basically the opposite side of the planet. Shipping for my last order just to the other side of canada was 14.99, so going all around the world for an extra dollar isn't that bad.
But that said, yeah the trick for most people tends to be to wait on orders to buy a whole bunch in one go, since the shipping costs don't scale very fast compared to price of the order itself.
Europe starts at $20 or so
To put it into perspective, I can get the latest Calvin Klein T-shirt for the same cost
It's luxury price segment for us
But the quality
Yep I agree the quality of LTT merch is top notch
Certainly likely that you can get stuff from big brands that have locations all over the world for much cheaper shipping, but lttstore, while big by youtuber standards, is tiny in the grand scheme of things. They certainly have dicussed Europe distribution center to try to maybe possible ease shipping costs there, but theres a lot of messiness to becoming international that would lead to increased costs (possibly to the point that while shipping might be cheap, the increased base price makes up the difference) and concerns that the lack of direct linus oversight that'd lead to decreased quality and its very very messy. Not necessarily a never thing, but they have a lot of growth yet to do before it makes sense.
When/if they do break the seal on being an international company though, thenn theres hope for distribution centers in many more locations worldwide.
which is why I asked if I can purchase the design atleast and print it myself
the tradeoff would be risking more knockoff sales
It is extremely unlikely for that reason, not to mention even if you did jump through the hoops to legally license the design (which would be significantly more expensive than shipping costs), it'd still reflect poorly on them to have lesser quality shirts out there in the wild that people might confuse for their actual product.
I think the last part is already happening
and probably worse because the designs are low quality
Perhaps, but if any of them are actually worth the effort to stamp out, they have legal recourse to do so. If they actually licensed it though, then they'd be somewhat more limited based on whatever the license agreement was.
any discount codes?
???
Very rare (read as: Never) Prices are already pretty fair for the product youre getting. If you watch WAN long enough you may be able to catch a "buy x get y free" but thats about as close as it gets
I see was just curious thank you
The adapter on fixit kits lets you use those the ifixit bits with the ltt screwdriver right?
obviously not optimal but just wondering
Haven’t tried it myself, but it should work since it’s a “1/4" to 4 mm Driver Adapter”, LTT screwdriver is 1/4" and the iFixit bits are 4mm
howdy, do somebody knows where I could buy more blades for my jerry rig everything knife ?
It does I do it all the time
probably any hardware store?
ok, I thought it had it's own kind of blade, but I did not find anywhere to buy some on his website, and thinking about it for a second, it would be stupid from him to use proprietary crap
YES my ltt order that i placed exactly a month ago just started moving today
a month ago, damn, they are really slow
I don't blame them considering the amount of orders they have to process per day
sure, but jerry shipped it in 10h, and he is alone, where has them, they have a team, so a month seems a bit long, but considering that they sell many more things, I was thinking something like 1 to two weeks
Are the time estimates on shipping accurate for normal items?
I find Canada estimates are the most accurate, but lightly both Canada and US (not sure about other countries, think all of them) have been taking additional weeks to arrive (sometimes over a week to be sent in the mail)
I was just thinking about getting a screwdriver, but I'm out of this location in 11 days, the estimate is 3-9, im in midwest usa. Should i trust it?
sadg, ok ty
Yea this is the worst it’s been for me but hopefully it won’t be too much longer!
I usually find them at walmart.
can i get ltt merch in the uk?
Yes you can!
Yes, it will just take two month to arrive
Little treat to myself, took a couple weeks to get all the way to the UK but defo worth the wait
My uncle Linus hoodie and bottle are moving
... Okay I think I'm hooked onto the algo
Woah I didn’t know that they had ads
Either they do, or Google has something that connects to my YT watch history
I super would not be surprised
hey, do somebody knows if the jerryrigeverything knife comes in a plain box or not ?
howdy, I just wanted to know, is it really worth the 250$ price tag (more like 320-350€ after shipping fee and other stupid french craps) ? I am looking for a new bag for trips, and I was considering that one, but idk if it lives up to the price tag, and if yes, why ?
This is its box, but it’ll come inside an envelope or larger box for shipping
The box or envelope it ships in would be plain
Ok, thanks a lot (also I bought it from Jerry's site, idk if it changes anything), I have my roommate that is will definitely open it if he sees it's a knife, and he has the Linus syndrome, but worse than him, so if he opens it, he might loose a finger or two, and I don't want to get back home and find my knife full of blood
I’ve only had it a day or two so these are just early opinions but I would say that it’s definitely is worth the price. I normally need two bags for my work stuff but it all fits in this without feeling too heavy on, which is pretty great considering the laptop and iPads. Fits my hoodie in there as well. It did take a while to ship but that’s just how things go
@onyx drum ^
I got mine first wave and must say that it is excellent for my uses. Including travel, daily carry, and shopping. Easy way to store all my devices for easy access is one of the biggest plusses for me.
Personnally I just need to put an iPad air, a framework, steam deck the chargers, 3 pairs of headphones, camera with lenses and some clothes, I mostly look for a bag that is big enought for all that, because right now I need a suit case for everything, and it's not ideal in my case, where I travel a lot by foot in nature
The LTT bag should work excellently for that
Ok, is he water proof, because I already lost enought hardware because of torential rain that is there for a few minutes and the bag just leaks everything in my laptop, or maybe weak to humidity ? Because if it is, I can't buy it if
I've not had problems with using it in rainy conditions, but the weather has been uncharacteristically less rainy since I got it.
ok, personnaly, you can have sunny weather, then a litteral river is being dumped over your head for 5min, then sunny again, so if it is not water proof, gonna a hard sell to me
It is water resistant, but my I don't have enough data points, but I haven't had any issues with the inside being wet or damp.
ok, i'm just gonna email the staff then, thanks for you help
C'est pas probleme
vous parlez donc un peu de francais, on dit plutot "aucun probleme" ou "derien" voire "pas de probleme", vous etiez proche
Merci
mais derien
tu apprend le Français depuis combien de temps ?
Par intermittence, environ un an.
Ma prononciation est meilleure que ma comprehension.
ah oui, c'est un bon niveau de francais pour un ans, moi j'apprend le japonais depuis 2 ans, et je ne connais que des mots qui viennent d'animé
Bonne raison
ah, moi c'est l'inverse avec l'anglais, j'ai appris quand j'etait petit, car j'ai vecu aux us, mais l'accent n'est pas rester, et je suis fluent a l'ecrit, mais je begaille facilement a l'oral
?
Animé et japonais
ah ok, a la base je voulait travailler dans l'informatique au japon, donc a mes 14 ans j'ai essayer d'apprendre l'anglais pendant un an, puis j'ai laisser tomber, et depuis un an je m'y suit remit, avec peu de resultats
Je n'ai pas beaucoup d'occasions de pratiquer mon français.
Let’s stick to English here please, per rule 10 :)
bah maintenant tu en a une
No worries
you know, technicly, if you strech a bit the rule, maybe that I just miss write very very much my english words and so they randomly become french words, technicly it's still english, but french people are just able to interpret it
First time I've seen rule 10 enforced, and I have seen a decent amount of non-English chat. But maybe I should just replace every English word with the closest equivalent in any language I speak, not sure anyone would be able to read that at all.
there is a decent chance somebody will be able to read it
My crazy mix of Norwegian, Swedish, Danish, Dutch, German, and French, plus random other words is not the most readable thing.
and, don't make fun of the mods, I have been mod on a server with 40 000 people, and we where 5 in the staff, but they where french, and french debate are really hard to stop when they start arguing over the name of a piece of bread with some chocolate into it, or how our governement is fucked, it is genuantly hard
Yeah, I admin and mod myself, not that busy, but I understand.
i'm sure if we have enought people, one per language, we will be able to decode it, it will take a bit of time tho
but they where not midle aged french
Dat har ek keine doute om.
or to be more specific, french between 40 to 60 years old, white, and living around paris and who voted, (we made a lot of polls)
iy uoiuyg g ioug iug iu hjkqsxfsdf ioç àu àyf ?
Yes, Ïle-de-France.
No chance
precicly, with the marseillais, they are the worst kind
Alllllrighty lol
In my mod background (with english only rules) I tended to be pretty lenient around "oh, you have issues with customs in european country X? <European language explanantion>" <European language thank yous>" exchanges where it's practical and clearly solving a problem, but more casual conversations were quick to be bonked just since edgier folks might chime in with things that'd be tricky for mostly english mods to deal with.
Back to merch
Backpack
Looks like pins are back in stock
it's not hating if it's what you are affraid, it is scientificly proven
I want a 100 sticker pack that will not cost 200$
Still need to figure out what to sticker bomb
Might not be a bad idea tbh
Have a decent amount of 2021-2023 stickers.
Though I’m not sure how many they’d sell, or how much more time they want to dedicate toward items that are primarily bonus bin
I just want to sticker bomb my keyboard, case cooler, monitor and dog in stickers, and I love the design of the ltt stickers, but they are 9.99 for a 6 pack
a pack of 200 for 20$ would be great, 9.99 for 6 stickers is not great
Just waiting for LTX23 Merch to be made available to me, I know I'll have to wait a while.
I doubt they expect to sell many at $9.99. More of an option for those that really want to pay for them than anything else.
it would cost me precisly 300$ to sticker bomb my case, keyboard and monitor if I bought from ltt
I found it interesting that linus mentioned a "professional top" in response to some merch message asking about polos, rather than explicitly saying "yes polos are coming" (although I think nick has confirmed polos), which makes me wonder if maybe there might be multiple professional environment appropriate garments coming.
I really hope that they drasticly lower the price, because they are really banana expensive, but at the same time, they are gorgeous
I think he’s mentioned a line of work-appropriate garments on a past show
They’re also die-cut, which brings the cost up somewhat.
I want not overpriced stickers (dbrand already got that space)
I really want the workshop jacket, but I cannot justify it.
I don't care, I just want my stickers, dbrand already has the overpriced sticker market, and there is only ltt that I found that does the style they do
Haha, fair enough
I'm pretty sure I consciously want LTT polos for business casual summer wear, but I look forward to them launching some product where my response is "Oh! I didn't think I wanted that, but now that its here....yeah that would work well as an addition to my wardrobe."
I am not sure if I want to know my LTTstore lifetime spend.
are you high enought on the hierarchy to bonk the store staff to make them not stupidly overpriced
I'm not an LMG employee, but I can certainly pass on the feedback :P
(and also, I have to pay like 50 bucks to ship anything from them)
you can break into their office and bonk them
Remember to back claim VAT
what is VAT ?
TVA
can it give me back the 35$ I paied ups to give me my soon to arrive jerry knife ?
ow, idk how to do that
Basically LTTstore charges EU VAT on orders bound for the EU, but in most cases you'll be required to pay on import even though the taxes should already have been paid. So get your import VAT receipt and order number and email support. I've done it multiple times no issue.
Just make lots of orders for other stuff, you’ll amass a nice collection of free stickers in no time 😝
Shipping
I know, I joke
do I need to pay "des impots" (sorry for the french, I just didn't have the word) I had one day a mail from my lawyer saying to me that I don't have to pay it any more, and I did not have to after word
too much money
Especially at this price
can I buy items, and keep the stickers, and they give me my money back on the shipping ?
If your shipping service (DHL/UPS/Asendia/La Poste/whatever) charges you the VAT on import, yes.
I already paid 50 bucks to have my 15$ knife from jerry, so yeah, it is quite annoying
then I can't claim it
Sure, you pay French VAT, then claim back from LTTstore as Wizmo never manages the EU IOSS correctly.
sounds like work, and I don't use wizmo
I bought from jerry's site my knife, and I bought nothing from ltt store
I don't know if Jerry uses the EU IOSS, so check the order confirmation to find out.
I might, once I finnaly receive it
but anyway, I have to go, have a great day dear unknown people from the web
Signing off from NZ
ok ?
No worries, we both have to go about our things
I got the WAN hoodie as my mystery hoodie, old fruit of the loom screwdriver as my mystery shirt
so happy
I always throw in some mystery items
i really needed one that fits but on a budget
so mystery
then of course i got gon fishin
Yeah, I specifically got fishing and trust me bro.
i was broke when that happened
and i'm waiting for LTX to get my custom screwdriver
I'm always broke, but HQ clothes.
just wish i got screwdriver printed on the LTTstore shirt
LTTstore_Adam, let the warehouse team know they're 
i'm so fucking stoked
It’s out for delivery so here’s to hoping
So is mine, let's see how fast NZ Post is.
If it makes you feel better, I had to fidget it with it for a bit before I got used to how to open and shut. And I've had knives and implements of that ilk for over 15 years. I think your roommate will be fine.
I'm going phishing
My package came!! WAN hoodie and phishing shirt finally
Can you let me know how you feel about the fabric used. About the WAN hoodie
Question for the hivemind. Has LTT given a date or time frame for when the LTX Merch (Tye dye T-Shirt/Hoodie) will be for sale for Tier 2($10) floatplane subs? Want to make sure I get my order in before its all sold out.
No dates announced yet as far as I know. Last they spoke about it was on WAN
It’s nice, the sleeves were kind of annoying at first but it’s really comfortable and very warm but not like ridiculously so. It’s really nice overall no complaints.
I’m confused about the same thing
Also I didn’t see the flag
It does not, just the shirt, pin, and stickers:
Doesn’t seem they’ve posted it anywhere public yet, only teased it on WAN
the towel has a sick design tho
I wan that hoodie so bad
i wanna upgrade to $10 Floatplane
grrrr
take my money
you took my money with backpack, screwdriver, deskpad, jacket, shirts, waterbottle
more
I’m upgrading in June
Is the hoodie and all part of the whale lab pack then?
That would be sad
It shouldn’t be
Maybe it will be sold separately
Does anyone know where I can find a second hand byoc ltx ticket
@wraith nova , so, inklaring betaald (173euro), how long did you have to after payment, for your package? 🙂
No, Whale LAN Pack gets a different hoodie:
what happened to the LTT cablemanagment mods that LTT was supposed to release awhile ago? did they ever drop?
Last time i buy something so expensive.
awesome.
Support
Part of what you're paying for is top tier support, they should be able to make things right if you hit them up at support@lttstore.com
Sorry to see that, please contact support@lttstore.com and they'll help you out
Does anyone know if the spout lids need to be washed before use
They probably do.
Even if they don't, I would wash them anyway
Give the whole bottle a good wash before use
It comes from a factory, you should always wash anything that'll be used to drink or eat out of when you buy it before using
Also, got my WAN hoodie, liking it so far. The texture isn't bad but when it's on but yea, I can see why people think it's like sand paper. I get that when in the process of putting my arms through the sleeves. I did get a size that is form fit
I mean, unless you like the taste from drinking chemical residue
Yum
Don't think I washed either of my bottles when I got them. I will wash these lids
Yeah most stuff isnt gonna kill you or anything super duper serious of you fail to prewash, but it will probably negatively effect the taste and its a good idea in general.
few days at most
thank you for the reply, sent a email.
you guys should make a messenger bag
We've gathered opinions from this forum thread about the potential creation of a messenger bag. Feel free to add your own thoughts to it! https://linustechtips.com/topic/1496473-steam-deck-bag-vs-messenger-bag/
First off, new here... I searched and searched for where I could find a thread specifically about the topic from last nights show regarding preference for a Steam Deck size bag versus a messenger bag that might hold a laptop but I could not find one. So I do apologize if this is somehow duplicate...
thanks a ton!
Don’t you love that taste?
I go to a school that banned backpacks in classrooms (stupid, I know) so we carry around messenger bags around. Would be nice to have a ltt messenger bag
since i need a new bag i don’t know whether to wait for the messenger bag coming in the future or not
it probably takes years to design and manufacture one
right?
That would be saddening if I have to wait 2 years for something I would use for 1 year max
And with the backpacks price, I’d expect the messenger bags to cost around 100-200 bucks
Idk
But imo I’d get another bag
I’d like to see it come out soon
But I wouldn’t get my hopes up
How do I send an LTTStore review if I didn't make an account when ordering?
Maybe @slow tinsel knows?
You'll receive a review prompt email approximately 30-45 days after the order shipped. Unless you've previously opted out. You need that prompt to submit a verified review.
I did get an email to review the backpack but when I click "send review on website" the token is expired.
Unfortunately there's no way to regain that token. :( Sorry.
Sorry to hear that. Yeah we're not completely satisfied with the way it works either and are exploring other options. We can't let just anyone post reviews though as they were being abused pretty heavily.
That absolutely makes sense.
Maybe I'll just post it here so it wasn't a complete waste.
Might I recommend making a forum post? linustechtips.com
(Can't post a review on LTTStore because I don't have an account there and the token from the email is expired) I have traveled with this backpack a lot already and it's a treat. • I went from Germany to Madrid for four days (plus a laptop bag for under the seat in the airplane) and then directly...
Cool, better than nothing! Sorry again about the review issue.
BTW we have spare chest straps available if you want one. Send an email to support@lttstore.com and we'll get one sent to you for free.
I'm having the same issue, so I'll send over an email later.
i don’t know another bag with this much capacity in a messenger bag configuration besides the Bag of holding from thinkgeek (RIP)
Anyone here from Sweden? I would love to know the shipping price to Sweden 😄
https://linustechtips.com/topic/1456140-ltt-backpack-costs-about-83-more-to-get-into-sweden/
Oh damn holy! That's ....
My backpack arrived in here in Sweden today, and boy did the total cost turn out to be a bit more than I expected. I thought I'd compile down all the costs so other swedes can know what to expect when ordering the backpack. In total, I paid about US$457 (~4950 SEK) to have the backpack sent to Sw...
Maybe someday lttstore will have distribution center inside EU so we can avoid some of these fees but until then I'm keeping my orders under 150€ to avoid paying customs fees
Yupp, similar story for Czech. I sort of regret my purchase.
No, they won't.
Maybe in an alternative universe where they are as big as CNN and basically are a entertainment monster.
The fcking headache just to solve basic sh*t like taxes between two different places...
BTW - does anybody know why does the "leather" backpack even (going to) exist? I reckon Linus emphasizing that he doesn't want to ship garbage or ticking garbage. I look at this backpack and then I look at other apple "leather" backpacks I have seen... If there wasn't some big leap in making of the apple leather or there are huge differences in quality, then it will look abused even when taken care of.
I feel like the LTT Backpack is a backpack you don't have to worry about carrying anywhere. I wouldn't go outdoor camping with it, definitely not, it's impractical, but in comparison to the apple "leather" version... I would worry that mid-walk it starts to rain and even after wipe indoors the leather would soak and after some time ruin itself.
...and just to clarify I am not hating on the design like half the freaking Reddit or comments on YouTube. I am strictly talking about the backpack's longevity.
Sure, it will probably last - Trust Me Bro! Right? But will you use it if it turns into beaten up leather tumor...?
You could say that buying "leather" means you understand these risks, but again... Linus was so much about that no-garbage policy and that classifying their products as merch is an insult.
I agree with that, but idk if I still will with this one. People buy leather because it protected the animal for years, so it must surely protect your stuff and last looong time if you care about it. Plastic and apple bits sawn together, give me a break.
the Leather backpack Linus has referred to as a 'lux edition' and will be priced a lot higher (but not as real leather), so probably a more specfic subset of people being targeted with it.
Also, some people like the worn leather look. Gives it character. As long as it doesn't rip and tear
Lux Backpack is made from apple leather, tougher than PU, and much cheaper than real leather
more info at timestamp https://youtu.be/k-T8L-WIGXQ?t=9125
We’ve made our fair share of clean setups for PC gaming, going so far as to create what we believe is the cleanestest setup of all time. But the folks over at Unevn think that they have us beat. Their super portable, e-sports/LAN gaming system is not just a cool case, its a WWE-style folding table… or I guess just a desk. But they thought it wou...
I live in EU but have some relatives in US, I already ordered from LTT to their place 3 times and they will come over to EU soon
I'd like to place one more order, but I'm always scared they will announce something really cool each friday
:L
Now you are legally required to handle shipping to eu for everyone here 😉
haha, that instead of salary
small price for smuggling the whole LTT store into EU
Your relatives will have a lot of flying to do 😄
Ah yes... that was better than my idea 😖
So any tips? Will there be anything announced in the WAN shop this week?
Guess the US&CA people are sleeping right now
We really don’t know what will be announced before
Linus gives hints during live streams usually
He talked about a laptop bag in yesterday's stream
But I didn't watch the whole stream
He said a couple wan shows ago the laptop bag isn’t going to be ready for months
Order from March disappeared and never seemed to leave BC... DHL doesn't even have tracking for the number anymore. Got a refund and am sad.
Now this morning, I get a UPS notification saying a package is in transit from Wizmo, coming from Washington.
Have to imagine it's my order, but why would it switch carriers and go missing for a month before then?
It probably is your order, yeah. Sorry for the delay there.
I've been looking into a few shipments that were supposedly returned to Wizmo by DHL, and then Wizmo re-shipped them under new tracking numbers (usually UPS but sometimes others). I'm guessing your order was caught up in that.
The package should be as you ordered it but please email support if there's anything else wrong after it arrives!
Thanks for that context - Sam has already been working with me and issued the refund a few days ago. Gotta find a way to get that money back to y'all 🙂
And feel free to DM if you need anything from me to help investigate
Anyone know if there’s plans for floatplane merch?
There has been some in the past, and I believe Linus did say on WAN a few months ago that they may do some more in the future
I believe all they’ve had so far were a couple of shirts and a pin
But the pin and one of the shirts were LTX 2019 exclusive
Ah alright
Is the mystery hoodie clothe color block or the new wan hoodie type hoodie
Oh
I don’t dig the color block designs
But the wan hoodie type designs look very cool
I can’t choose between those
It would be nice if the 'mystery' items showed the pool of potential products on the page, but I appreciate that eapecially in the case of tshirts the pool can change based on what they happen to have in stock.
But it would help with confusion, particular around not obvious things (e.g. are womens varients included in mystery purchases in categories where they exist? Afaik they arent, but thats not obvious.)
I don’t want a swacket
I just a want a light hoodie to wear
Welp
I’m rolling
When do you get to see the type of hoodie you get?
Is it part of an email or
When it arrives
I believe you'll only find out on arrival. Fwiw the colour block designs werent my favourite when they launched but they've grown on me since. Also I'd say they're slightly lighter weight than the wan style ones, so you might find them a surprise hit if thats how the rng goes.
i got a wan hoodie from mine
I love to pay 80$ for a 15$ knife (jerry rig everything knife), the 55 bucks of shipping from the UK to France, and the 20$ the delivery guy took for the import taxes (I hate the breakxit) really did not make my day
Gotta order in larger and less often amounts?
Is it ltt exclusive?
It's cheaper if you order it from jerryrigeverything

It's from the jerryrigknife site 
Nah, the jerry knife, it's great, only 15$, but also 55$ of shipping, and also 20$ of taxes
Let's try and keep this channel to lttstore-specific discussion, please. If you're experiencing issues with another creator's merch shop, it would be best to reach out to their support -- in this case, jerryrigeverything@gmail.com. Just want to keep things on topic and avoid any confusion here. Thanks!
Uncle Linus delivered!
ltt programing socks when?
FedEx has come through once again as most destructive shipping company
Hey does anyone know when the Float Plane subs can order LTX merch?
Bruh.
Water bottle vs sheet of plywood
The new slim look.
No announced timeline just yet, but there’s a post about the digital pass on Floatplane right now! I’d also recommend linking your Discord account if you’re an active subscriber, to gain access to some exclusive channels here :)
I have linked in, does it take time to connect here on discord?
Usually a matter of minutes. If the role still hasn’t applied after a few hours, you can try reconnecting.
Aaaand there it goes
Cool haha good timing
Indeed :)
Got an email today stating that the Dad Hat isn't coming in my order after all. It's just weird, as my order was shipped on the 24th, but the email just came today...and both items say fulfilled in my order history.
Is it only in one size this time? Because I'm not seeing the drop-down menu for size selection.
Yep, it's only one size
So I was packing my ltt backpack for Japan and my old SFFPC case with spare parts was in the corner of my eye so I was curious to see it it would fit… it fits perfectly
Best screwdriver yet. Almost a better fidget toy than a tool.
True
anyone have the new line of blank tshirts? rly like the US H TIPS shirts tbh
but yeah idk if it's just me or if this is happening to anyone else, it's only been machine washed, cool/cold and low heat tumble dried
and just stock tide detergent, idk if that matters tbh
and it's not been dropped (not frequently at least)
This symbol means "do not dry clean" so maybe tumble drying is too hot in your dryer?
I know, but I've run into similar issues with a couple Critical Role merch shirts too. If I run them in the tumble dryer for too long on high heat bits of the graphics start to peel off - this shirt in particular is affected.
https://canada.critrole.com/collections/t-shirts/products/fjord-long-sleeve-t-shirt
Embody the duality of Fjord Stone’s past and present with a long sleeve t-shirt that captures the symbols of power that forever shaped our sea captain. The left sleeve features the Sword of Fathoms gifted by Uk’otoa surrounded by sunken cloven crystals, the right sleeve features the Star Razor and compass that leads to
Then again, could indeed be a bad screen printing batch? One should be able to tumble dry things on low heat without it destroying the graphics or shrinking too much. 👍
I c, I'll try no heat tumble ig, but that's gonna like take 3x as long (6hrs as opposed to 1.5 iirc)
probs gonna shoot support a email and see if anyone else came in with the same issue and maybe it's a batch print issue
tbh it doesn't really matter cuz it like inside print, no one is gonna notice unless they are into looking at the back of my neck lmao
even then it's on the inside
Yee totally check in with 'em, cause maybe others have experienced the same issue. Technically the tumble dry symbol is different, but my mother's experience in the textile / fabric industry has taught her that some manufacturers don't properly differentiate between the 2. 😄
Yeah, had this with me being used to European symbols, and getting textiles from elsewhere.
Not with drying, more with wash.
Had the same issue with my gone phishing t shirt. The other print is perfect but all the inner printing immediately came off on the first wash
Hi I bought my bits when they had a black oxide finish but now they have a black phosphate finish. What's the difference?
LLT store support changed my opinion of them 100%. i went from a skeptic/on the fence to im going to buy more stuff and happy with my purchases.
Support is great
Never had an issue with them, a bit slow once, but that was a long time ago, and they were quite backed up.
ye I get why people are skeptical of tmb™️ if they haven't bought anything before or haven't contacted support before but that's always sorted out after actually getting in touch w support lol
i emailed about the carbineer replacements for my backpack and was told to basically: "email us back in a few weeks or when we announce a replacement for them".
Tmb is basically "we are empowered to fix everything in an extrememly generous fashion, but we're not on the hook if someone is clearly trying to abuse that generousity". Which works great for everyone who ever has a genuine issue.
they replace an original stealth hoodie because it slightly tore in the wash (and the string went missing)
I expect the announcement won't be exclusive to wan. My expectation would be twitter, a couple shoutouts in regular videos and a youtube post, wan, and probably a direct email to everyone who bought a backpack. That last one probably being the most effective, although of course spam filters and people dont always read their emails.
Idk if any of yall have tried the underwear, bras, or boxers but they are literally the best quality ever, I'm definitely getting more
And the quickness of shipping 10/10
Could I put my wan hoodie in the dryer or is there any kind of setting I could use to ensure it is safe?
you can, just dry it on low and it should be fine, but dont take my word for it 100%
it should be fine, maybe turn it inside out to insure the design stays if its one of the ones with them
Okay
I always air dry mine and it always dries completely over night
Howdy, the knife is sold on lttstore.com, so it's still good, and I'm not having issues, I'm complaining
Yeah but your still talking about other merch stores
I just got my apirl 1st potato shine water bottle, great bottle cleaned it out etc using it now, looks good, the stickers i got in the pack... wouldve been nice if they had a pull tab, i have very large hands so it was really hard to get the backing off of them
Has there been a mention of when the medium sized mid length sweatpants will be back in stock? And the smaller northern lights desk mats?
They have a saying they've said on WAN show multiple times:
"Make it right"
I ordered the silver shaft since they mentioned the black scratches off. What's been your experience with it so far?
My black shaft (giggity) has some visible scratches. I have used it to work on numerous pc's.
I suppose I can't order one now, but could I see a picture?
Now I wish I had gotten the black shaft lmao
lol
There are some spots right near the bit end that have got scratches, although they are not that bad.
I assume with time it will get more torn up just from normal use.
If you treat it well then it should be fine
Thank you, maybe I'll get the chance to get a black shaft 👀
I've treated mine like any other tool
Fully expect it to end up mostly silver sooner or later though
I just assumed from what they said it would get scratched up badly, quickly
Ah well, silver still looks great
Hi I bought my bits when they had a black oxide finish but now they have a black phosphate finish. What's the difference?
Think that was an error in the description
I don’t think it was ever black oxide though, I think it was always black phosphate, they just mistakenly put black oxide
Thanks
Finally got my Uncle Linus stuff! And my windbreaker came in as well
They forgot the Gaming Dogs sticker pack 😕
Already emailed support about it
For the cable ties, would you be able to cut them to size without the threads breaking apart? Or would you just have to deal with the excess
hey (even if it is not strictly lttstore product, it is still sold over there) do somebody has the 3d files of the jerry rig knife or just an accurate mesurement of where are the screws the spring things and all ? to do a custom cnc handle, has well has maybe doing a blade for it that is not just a holder, thanks a lot if you are able to help me
if you have a heat gun you might be able to cut them to size and then heat the end to melt the end so the threads don't come loose, but idk the material, if they are for exemple cotton, it will just not work
Hey guys. Should I be removing and washing the seals of my LTT bottle? swore I saw a bit of mildew building up on one so I tried to remove the seals to clean them and it was very difficult. I ended up slightly damaging one. Thoughts?
I'm considering ordering another lid but don't really feel like waiting as long as I did for just a lid
these fit just fine, have an older one from a few years ago just tried it with https://www.amazon.com/Takeya-Originals-Bottle-Spout-Black/dp/B01FVW3EXG/ref=sr_1_4?crid=SGBYMZYAVYUK&keywords=takeya+lid&qid=1683575027&sprefix=takeya+lid%2Caps%2C131&sr=8-4
Easy twist sip lid allows you to drink right from the spout without removing the lid. This removable Takeya lid is specially designed to fit all Takeya Bottle sizes (14oz-40oz). The lid is leak proof, BPA Free, and features a wide opening for ice cubes. The lid hinges to stay open while drinking ...
If you dont want to wait that is... not trying to say dont buy ltt lol
Well with that price it's better to just wait ahaha. But should I even be removing the seals in the first place
or is there an easier way to make sure they stay clean
I usually just soak mine in dish soap every so often, have a straw cleaner that fits in the gap if needed
Basically when I pulled it out, it tore almost all the way through the big seal on the main portion of the lid. I goofed it up bigtime didn't I?
Like I'm worried to even use it ahaha
nah, you can just buy new o-rings on amazon, though I bet ltt support has some too they can ship you
worst case it leaks a little, not going to hurt to use it in the meantime
Alright. well thank you for your help kind stranger
Is there info about the screwdriver colors at ltx? Like what colors and whatnot only heard it mentioned on wan
Is that... Alpaca secretions from Imported Juice Exchange DOT com 
Checking that site, it appears to be expired now. How am I supposed to get alpaca secretions now?
(I recognize maintaining those sites probably isn't sensible. Could at least have it redirrect to lttstore though...)
Black oxide on the left.
Black phosphate on the right.
I'm pretty sure the is a different it looks a little glossy
Indeed! I didn't know Uncle Linus did something similar to the AMD CPU giveaway! 
I've had this happen on two of my LTT blanks, as well as a few other shirts with printed labels. IIRC, Linus has mentioned on WAN that this is a known issue. The internal prints are done by their supplier overseas, whereas the actual designs are printed at a local shop. I've been extremely impressed with the print quality their local printer has been able to achieve, and how well their prints wear -- definitely wouldn't expect anything similar there. In regard to washing/drying instructions, the second symbol from the left indicates "lay flat to dry."
hmmhmm
I'm starting to wonder what on earth I was shipped
I'm pretty sure a pillow and 2 towels don't weigh 30+ LB
The Uncle Linus hoodie is mad comfortable!
Depends on the packaging, if they decided to do like origin in a big crate, it might, could you put an update once you got your 30 pounds pillow ?
Did you order a brick pillow? I did that once. It had a lack of feathers.
Alpacaaaa
Maybe they shipped the whole crateful of expensive edition pillows 😂
It does to DHL
Or maybe they just decided to ship you a bunch of CPUs with it
yeah, it's pretty common that they dont show the weight correctly.
applies to.. pretty much any shipping company
Ah it must be the complimentary 4090 PC
just wish shipping would get updated, 14 days of sitting at this stage is kinda annoying
I hate DHL with a passion
We use them to order parts for work and it's always a trainwreck
I had the same issue with a delivery to Belgium.
I can't count the first 2 weeks between the Shipping label beîing created and the package beiing shipped because I ordered a gone phishin shirt.
But the package departed Vancouvert then move to the US.
Then for 2-3weeks no update.
Finally, I received a notification from Bpost (the belgian post service) that my package will be delivered today.
In the good news,
I was also supprised that I didn't had to pay a supplementary tax.
The complete travel info I have is :
Canada -> US -> Germany -> Belgium.
LTTstore does use the EU IOSS to charge VAT, it doesn't always work. Never works into the Netherlands, neither does it into Norway anymore.
Thanks for your feedback.
Good to know that I have to be careful and don't go on a shopping spree in case the system doesn't work next time.
If it doesn't you can claim the VAT back from LTTstore.
Quick and easy process, just takes a couple emails.
Indeed
has there been any word on torx bits? still waiting on those to place my order 
oh im kinda used to it, spent a fortune (non-whale numbers) on ltt stuff so far I assume its because ive got an uncle linus water bottle as part of the order, its just annoying
e.g. deliveries usually take 19 days to be delivered, but usually i get a different status after 10-11,
Linus said they’re coming on WAN show but he doesn’t have a timeline
I was just starting work when my LTT bottle dropped and the cap broke
oh shit, no cap?
Pun intended, I'm guessing?
yes
Lmao, it was a good one
I need to cancel/edit an order,is there anyway to do that other than email support?
Don't think so. Support is pretty quick the majority of the time these days.
I accidentally added an extra water whilst trying to get better shipping costs and forgot to order my screwdriver
I did realize it went from 176 to 115
What’s worse is I have vacation in a few weeks and needed to arrive before hand
support typically is able to get to stuff in a matter of hours and can adjust order contents as needed without significant delay to the actual shipping time, although shipping time itself can sometimes be dicey, but that'd be true regardless of order contents.
My package has reached Max-Q
The location of maximum resistance during shipping path

guys does the new llt blottle lid fit on the old one?
It should, there are also several options for lids online that also fit the LTT bottle
I've got a newer 40oz bottle and an older white and black with "LINUS TECH TIPS" written down the side, and I can swap the lids around with no problem
Yes, it does they are interchangeable
Email support, as long as it hasn’t been shipped out yet, they can edit it
It got taken care of,going to reorder it today or tommorow,live in california so hopefully it won’t take to long to arrive
Screwdriver finally arrived at customs 
(now just gotta wait 2 weeks for dumbass customs officers to actually release it for delivery)
My uncle Linus hoodie is a lot bigger then I thought it would be
I genuinely forgot I bought the uncle Linus merch because the video caught me off guard for even a second till I realized the date.
I was admittedly surprised at how nice the windbreaker material is. I kind of need it to rain so I can wear the thing and review it properly
Mine is broken 😭😭😭. How can I get the warrenty?
Sorry to see that! This is an issue we've been working on and our replacement carabiners are nearly finished production. Hopefully it won't be much longer until they are shipped out to owners of the backpack. However, if you need immediate assistance, you can email support@lttstore.com.
You can email support at support@lttstore.com and figure out how you want to proceed. That particular thing with the carabineer is something they're aware of as an issue and planning on sending out replacements for once they've got a full solution package put together, but they may have stopgap solutions for you between now and when that's available. [defer to the lmg person I see typing tho.]
And we said basically the same thing so good that we're all on the same page.
Thank you!
F
I had the same issue. Hopefully they'll have a fix for us soon.
Has anyone who ordered a Tech Sack in the last month had theirs ship?
I ordered on 4/15 and a tracking number got created but it hasn't shipped yet.
@sonic spindle I had the same situation happen when I ordered the backpack. Sometimes logistics take time, don't fret, be patient, and you'll get it soon! All good things happen to people who wait 🙂
That's not helpful. I'm not being impatient, I'm not complaining through the official channels, just trying see if there are any other data points.
Oof, I hope mine will hold up longer or forever.
I really like their design, so even after I get the updated carabiners I won't change it until they get damaged.
quick question on the backpack 🙂 I have a HP G7 laptop, it appears to fit all max specs (JUST!) but the length is like 5mm longer, with those that have the backpack, do you think it will work?
I really want the backpack! but if it doesn't fit my laptop, I'm a little hesitant and that would be it's primary use
Yeah mine got here not long after I ordered mine I was pretty surprised on how quick it arrived
Ordered 5/7, tracking 5/8, moving 5/9.
that doesnt sound right
he probs talking in month/day
I am, yeah.
most backpacks that support a backpack are more of a inch of screen size based then the width of the laptop
they mostly always leave some wiggleroom
but i have never had the backpack in my hands so maybe it is different
month day = correct way
yeah I know they do usually, but I looking at the max laptop size (L / W / H not screen size) they posted on LTT store, so I guess it's more if that max size has some wriggle room
idk why they based their sizing off of apple laptops tbh
Linus & crew have said it doesn't fully support 17" laptops (unfortunately mine is) but the overall max it's just on limit apart from length? (or height standing on edge) is 5mm longer
given shipping costs and time to UK, I'm hesitant to just hope for the best
Has anyone else's black and gold water bottle fade really quick? I got mine in March and the gold paint has faded so much from just handling it
It's been a known issue for a while and a reason (for me) not to buy any gold-paint bottles from them
I got mine in august and it’s still super vibrant
Gold is the only affected color
Yeah I got a black and gold one and it still looks like new
yeah the worst thing is its literally just been at my desk since it got, i had no idea it would be this bad with such little use
Good to know, I'm gonna create a ticket then
It really depends on where you live
About 2 hours south of LMG
Support is sending me another one
the backpack barely fits my laptop. its a very tight squeeze
it could use more width tbh
also when are the replacement carabiners shipping?
We don't know yet
I move next month so it better be soon
Hmmmm thank you for this!
backpack has issues with fitting my laptop too
the sleeve is too small tbh
seems to be designed for smaller notebooks
How do you guys handle a change in address between the backpack being delivered and the replacement carabiners being shipped? I am moving across the country next month for my new job and wont have an address until right when I move. Is it possible for support to delay my shipment until I can tell them where to send it if they go out next month?
Definitely contact support@lttstore.com
Alright ill send them an email in a bit
I was pleasantly surprised, I got a response in less than an hour.
Did lienus have a leather ltt backpack in the newest vid
They are working on a Deluxe Backpack.
Whale
yea ig
I'll stick to my Wave 1 regular backpack, it is excellent. And I have no impulse control.
leather backpack a weird concept in the first place
let alone with the price increase is gonna firmly put it into 'youtuber merch' category
instead of 'arguably okay price for a good product' which i'd say the current backpack is
It is appleskin leather or something like that, I think. So more expensive, but not real leather expensive.
Yeah it's apple leather
I wonder how many times CATSA/ACSTA at YVR have seen the screwdrivers.
I packed mine into the checked bag when travelling out of YVR, had it in my LTT backpack at LHR, got a little too close for comfort there.
They're illegal to carry on and they don't pay that close attention to checked luggage to look for them
I did just look up the CATSA rules, screwdrivers are allowed if less than 6cm from shaft to tip
And the shaft on the LTT screwdriver is about 8cm
Yeah
Still makes me wonder if CATSA at YVR had confiscated more than normal
Same rules apply in the UK, so I was lucky I got it through at LHR.
All the more reason Linus needs to get the stubby screwdriver out the door
They should put a notice at the build your own screwdriver booth at LTX to pack it in checked luggage.
Not just for airport security either, I carry an iFixIt kit when I travel to LANs but I have to leave it in the room because most places do bag searches. Would love something I could leave in my bag and carry into events.
I've only had that at theaters, but I never carry bags in there.
You can expect it at LTX
Although I suppose they would allow in LTT screwdrivers specifically
Did they actually move to America? Tracking app says Vancouver Washington lol
wouldn't be the first time that they got the country wrong
I think once here a package briefly teleported to australia iirc?
This is normal with the shop app. All my LTT orders say the same. They could also use a courier to get it over the border before final shipment.
Yeah that’s happened to me a few times! I think it’s because there’s a Redmond in Western Australia and in Washington State which both are abbreviated as WA
Just the app, the actual Wizmo tracking will say BC.
Gotta rep TechLinked today after laughing so hard last night I woke up my roommates.
Oh yeah didn’t even think about this, guess I’ll have to mail them to myself
Yea mine went from Washington to Australia and back in 12 hours, yet it took an additional 2 weeks to get to my door despite that distance being WAY less
Travelling light?
I remember one of my t shirt orders went all the way to Georgia (I'm in Utah) and then back
Yeah, just doing carryons + personal items
that was a weird one too, and unlike the Australia tracking, that one was real
Turns out the shipping label print was sheared off and it was just left on the truck
It was opened for them to print a new label too. There were signs of tampering
I generally travel with backpack and carry on bag when flying light, for the exact reason that I can check the carry on in if I want/need to.
Gentlemen.
It has been over 6 months.
I have only now realized what this pocket on the WAN hoodie was originally intended to do.
Please why are there pockets so small, literally only pills can fit in them
There are these water bottles at Walmart that let you flavor the water as you drink it and you can put your own stuff in them too like coffee concentrate or juice or whatever and I got the ltt water bottles and thought id just fill up the small one with the bigger ones but i dont need to carry both because the lid fits
So basically Air Up, but the lid is compatible with other water bottles?
Or does it actually add something to the water and not just a smell
Add liquid
It adds liquids like concentrated coffee into it, and you twist the top, depending on how strong you want it to be
As long as it’s a liquid that’s designed to be dissolved into water before you drink it works great
You can refill it with these things and it taste the same except it’s a lot cheaper
hey i remember when they used to sell those in stores
where the heck did they go

What do you mean everything I’m talking about I bought from Walmart except for the LTT water bottle
I found them in the water bottle section in Walmart. I found out they existed from my friends on my digital electronics, robotics squad like just a month ago
The offbrand flavor stuff is in the monster drink section
And works really well with these amazing water bottles from lttstore.com
need to buy one
As a person who is sitting next to more than 100 cans of monster drink, I go down that aisle quite often
they're part of the merch pack that you can buy with the ltx pass right?
The on brand expensive ones are next to the dishes in Walmart
cause i kinda want to order the bottle but shipping feels bad when it's intraprovince
Water bottles no idea?
hmm ok i def have to check fosho then
I live in the US and it was 90 bucks us for two water bottles I’m so happy they work with all of the lids that I have
They don’t work with Camelback lids. Sadly I have like 20 of those.
ah i see
Huh... The more you know...
It adds it as you drink, so you can fill the water bottle several times, and it won’t taste stale I fill mine about 10 times before it runs out but I only make tea that’s not very concentrated
I put my earbuds in some of them?
They’re not part of either of the merch packs, but they will be available for pickup at the event if you pre-purchase, or you can just buy them there at the booth
Can we post where we stuck the stickers here 👀
Where did you stick them 
I too want to know what you did with the stickers
I feel like if you have to ask then it's a no
Probably made in the same factory
Absolutely!
Does anyone else have a problem with the elastic on the chest strap of the backpack falling apart I got a replacement a couple weeks ago and it’s already starting to fall apart
I know they’re not supposed to go on cars, but 
Why do you have so many
Why don't you?
will the torx bits ever come back in stock?
i have been looking at it a few times a month and they were always out of stock
Eventually yes, no exact timeline though
I bought the random lanyard and get me my favorite color way
Tech Tip: if you can read this, you're too close.
Because I want them all
What’s the dented thing
would putting pins on the backpack ruin the material
Highly doubt it. If you on and off the pins a ton you'd probably be able see a smidge of wear when the pin did its penetration, but its not gonna ruin strutural integrity or make the whole thing fall apart.
Linus has stated in WAN that he doesn't recommend anyone putting the pins on the backpack because then it won't be so water resistant.
ah shame
i wonder if just pinning the front pocket would make the whole thing not water resistant
can i like buy a sticker package without the hasle of canada shipping to usa?
AFAIK, no.
anyone here bought the ltt backpack
i’m thinking abt it
i want to see how good it is in the long term
I got mine Wave 1, love it. Any questions?
Sticklocks are designed to reduce the horizontal force applied to your joysticks when traveling with a controller or console. They're small, convenient, and can be installed or removed in seconds. Check out our Sticklocks Installation Guide: https://lmg.gg/sticklocks COMPATIBILITYValve Steam DeckNintendo SwitchNintendo
yeah is it worth the price to you? it seems super expensive
I am very happy with it, even after import taxes.
It'll definitely last you a while
I think it's niche but I use it for my plane trips
Too big for any daily use
i’ve had a swiss gear for the past 5 years but it got a rip at the bottom
i’m going into college
so i want a nice new backpack
If ur used to a big backpack it's fine ig
At college I stuck with my regular degular jansport
Anyone have some new LTT shirts? I was wondering if they are longer than the blank color shirts they sold for a little while
All new prints are the same shits as the blanks.
unfortunate, they aren't nearly as good as the old AA shirts, especially the length.
I prefer them over AA, but I know they are slightly different in size, not anything that bothers me in use.
Alright LTT, you’ve made “stick locks”. You might of finally made something we don’t need
no actually they're great for things with drift
Something like this would've been also a great solution for the backpacks
It doesn't move sideways
don't normal bits you can buy anywhere fit too?
i am a woodworker and always carry a small bitset with holder when i am at work
mostly because of almost every screw we use being Torx 20 xD
I want to buy it from LTT for the reason I bought the screwdriver, it feels more like a donation
i see
plus half bits fit more in handle
And I don't trust my skills in cutting full length ones in half
Isn't it safer to shorten them by grinding than by cutting it? Or am I misremembering something.
I guess it would depend on the tools you have
use a sword
Did y’all see the post on the subreddit about the water bottle that was ran over?
I’m surprised it wasn’t destroyed more than it was
A orange pi 5 b case from ally expressed that was damaged in shipping
The "premium" leather ltt backpack looks like linus stores his gimp suit in it
So far most of my purchases from AliExpress have arrived and I ordered them after my Gone Phishing shirt

I caught some phish
will there be a 1500mm x 500mm version of the northern lights desk pad? i really wanna get one that covers my entire desk but the 1500mm x 600mm variant is just a little bit too large for it
Yes but you can only fit half the amount
I don't understand people who want a bit set inside only
Just keep the small bitset on you
Or a i-fixit
I wish they had different coloured sticklocks. Black is so boring
That's a lot of screws
It’s convenient, that’s the whole point of it having the bit storage
I carry another kit too but I try to keep the stuff I usually need in the handle so I don’t have to dig for the kit
It finally happened 😦
Almost all of mine are wobbly af
Looks like you could go phishing with that hook
Quick, cut yourself on it and then sue LTT for it being unsafe
Anyone know of any stateside places order replacement lids for the water bottles? Or another brands lid that will fit? Was lazy with washing mine and the use of water flavor packets and battling a mold problem now(solely my fault, not a LTT defect)
Hydroflask wide lids fit perfectly
you can get them just about anywhere. Amazon, walmart, hydroflask site. Anything hydroflask wide compatible should work. I've bought a few off Amazon and no problems
Sweet, thank you. I'll have to suffer a Walmart trip tomorrow and see what I can find
@onyx drumBrick and Mortar wal-marts may not have just lids on their own. YMMV there, but I know they carry hydroflask bottles in store
I'll take a look see what I can find, may have to check target as well
Scratch that. Asked my wife if any of her water bottles are hydroflasks. I now had a new life. @dry bolt thanks again
Was also posted above but here ya go https://www.amazon.com/IRON-°FLASK-Simple-Insulated-Bottles/dp/B07XDM1TB4/ref=mp_s_a_1_5?adgrpid=64648989592&hvadid=634543682531&hvdev=m&hvlocphy=9014870&hvnetw=g&hvqmt=e&hvrand=7089225832317797652&hvtargid=kwd-577607626253&hydadcr=10065_13571809&keywords=iron+flask+replacement+lid&qid=1684118527&sr=8-5
Takeya ones also fit
Level up your Iron Flask Wide Mouth Water Bottle with the spout lid set. Youâll stay hydrated wherever you go and wonât need to fear losing your lid, since our spout lid set comes with two replacement lids made with non-toxic, BPA-free material thatâll last a lifetime. Whether it's icy cold...
hi could anyone that has a deskpad help me? i want to buy one that covers my entire desk, problem is that i'd have a few cms extra on the deskpad in height, i thought i'll just let it fold up a bit since i dont want it to fold down (would be a bit frustrating it might elevate the part of it thats close to it) or i just cut it or just get a smaller one

