#lttstore
1 messages · Page 22 of 1
Yea
im not sure what ur trying to accomplish here lmao
we arent responsible for any potential unban
Ofc? But you are all in favor of it
correct
I don't think you should be in favor of both the ban and purging a days of chat
I'm not, for the record I have no care whatsoever for this person
Ok and now you know what I'm trying to accomplish here
At the very least voicing my concerns
which you have done fully
Sure
he was being a dick directly to people, people were getting frustrated,
Pretty sure he’s explicitly said before he was only here to troll
The thing I find annoying is once someone is gone it’s hard to search messages from them
Discord could be better
calling people shills, when I've been super critical of the company for their logistics failures.
@hushed sonnet from:234130516125679627
Lmao you guys still talking about that loser? He deserved to go. He didn't provide any meaningful conversation, assist anyone with their issues, or provide any positive discussion.
It's my bad. I think I asked who he was
All he did was troll people everytime they remotely had a backpack or shipping issue. Imagine coming to discord, voicing your concerns, and then immediately getting trolled.
It's not good for LTT or the community. All he wanted was attention
Who are you talking about I missed a lot
We're not anymore, don't worry about it
In other news, looks like I'm getting my package from drop faster than my ltt backpack

Classic
Not important anymore
on another note to whats above. has anyone seen updates for the rest of the backpacks, i know they said something like 15k (ideally rest of W1 and most of W2) should be shipping, what about the rest of W2 and W3? i know they had mentioned that most/rest should be at port by mid/late OCT but curious if anyone has news cause i last heard a while back
From what I understand, wave 1 and 2 are the only things on the radar. I have seen some tweets about wave 3 people getting their shipping label created, but it looks like they are pre printing labels due to a huge influx of backpacks coming through.
is it just me or are the ltt screw drivers still on the DHL "Electronic Notification" phase?
I can’t remember is it next week that black shaft screwdrivers ship or the week after
well im getting a wave 1 normal shaft driver which is why im asking lol
i got the shipping email thing but its been on label created for like a week
I asked earlier but nobody responded
End of the month / first week of November
Does next week count as the end of the month
I'm sure you can look at a calendar and use your best judgement..
Still no delivery date for me
Fair enough, im end of W2 and i never got the email they sent out saying i was apart of the 15k unfortunately. but i have to be towards top of whatever new comes in lol
It’s finally here!
noice
now to wait for mine... which should be "soon" as im on the wave 2 and 3 border but also black shaft so... yeah
also when will we hear more about more bit options?
Ordered 9 days ago and somehow skipped the wait
My wave 3 ordered October 11th just arrived 😐
Im not sure why but my wave 3 already arrived
I believe the C is there because it is wave 3
It's not fair at all
Yeah nobody else in wave 3 seems to be getting there’s I’m just trying to figure out what’s going on
I think Nick said there was a wrench in the cogs and that mistake has been remedied.
I bet they pre-printed the labels from newest order first to oldest order and they started slapping wave 3 labels on boxes and started shipping.
I'm not annoyed or anything with my Wave 1 order not moving though
That's so awesome
Yeah hopefully the ship the rest in order
Mines not even shipped nice
have we not heard anything about more screw bits options yet though?
are we getting more? when? what types are they so far considering?
yeah as the current options are very bare
JIS, gamebit, and security torx are my main needs that arent covered yet
idk, i ordered all the options they offered, i think its like 60 bits total.
yeah security torx looks like it would be pretty important.
all 3 are pretty important. especially given the slight right to repair kick linus has been on
i ordered this too mostly for the case to see if the LTT bits would fit
as theyre common in consumer electronics
gamebit youll find on most older gaming stuff, think n64, snes, nes, genesis.
JIS youll find on basically anything made/specced in japan, so like a 3DS,
security torx is in near anything they want to make just slightly inconvient for the regular person
go into a public bathroom and look at how the stalls are secured, likely security torx lol
but like your xbox 360 controllers are security t8
a bunch of arcade cabs are security torx, etc
Someone on Reddit did as well
Torx bits ARE security Torx (the ones with the hole in the middle).
That was me lol
I posted it to Reddit as well
Ah nice. I haven't gotten mine in yet, but on the website it only shows a drawing of the side profile of the bits.
It does say “Torx/Security Torx Set” in the same image 😉
I see it says "security torx" on it now
Yeah just checked
I use TR6 a lot at work so that'll be nice
I would like to know that too
My order has finally processed in Whittier, CA, US so hopefully it arrives soon in The Netherlands (#343xxx wave 2) (backpack)
LTT bits are standard 1/4” hex bits. The should fit in any such case, just keep in mind they are shorter so if the case is deep they might get lost in the foam or whatever it is made of.
Backpack? I guess I need to send a complaint email
Smh
You haven't got a track and trace?
Original order is 342k, had an address change which clearly moved my spot somewhere.
No tracking update whatsoever, still unfulfilled.
Hard to say if I've been put at the end of wave 2, or completely forgotten about. Based on their launch so far I genuinely don't know
I'll report my findings when they show up. I ordered a black shaft driver tho so it will be a while before that order ships
now I’m curious when my shipment lands on the other side of the big puddle in Europe.
Probably before my backpack label will be created
Canada Post has said my backpack is out for delivery for the last 3 days, the anticipation is killing me
I’m also #343xxx wave 2 and haven’t had any news outside of the email two weeks ago saying I would hear something by Oct 20
in the email they write: If you haven't received anything by October 21, let our support team know. So
So i think you can contact them tomorrow
Where did they communicate that
Oh ok back then
So that email confirms I was bumped to the end of wave 2...
(i did not get that email)
Ahh, that explains a bit
That is so awesome
But i think you should contact them
In my opinion a adress change shouldn`t affect your position
Technically when I asked to confirm my wave, they only we've added you to the list to be moved up to wave 2
But I assumed I would be in my rightful spot, guess not
Yeah I plan on it if I don’t see anything in the next 24 hours or so
Yeah i dunno if they guaranteed same spot in wave, just same wave. Which is still a step up from "sorry cant do anything due to shopify limitations" as it was for the first few days. I think they were still expecting waves to arrive together at that point to be fair, instead of the current mess where stuff is partially unloaded and maybe wave 2 backpacks are arriving before wave 1 ones or whatever the current mess is.
what a disaster
and at the end of the day, its very possible i could have ordered a bag on monday and have a shipping label already lmfao
lmao - rgb hoodie arrives. my kids mad you don't sell kiddo sizing because he wants one. 🤦♂️ this is how you get us isn't it? 😆
A 24 bit holder for extra bits for the Linus Tech Tips screwdriver, although any 20mm long, 1/4 inch hex bits will fit. The cover slides into place to prevent any bits from falling out while the case is banging around in your drawer or toolbox or backpack.
If you really liked this project and would like to buy me a coffee: https://ko-fi.com/labtec
someone already made bit holders on Thingiverse
Yeah that doesn’t surprise me. Not something I need though. I bought the Torx and the specialty set, but I probably didn’t need them. The standard set has most of what I need, and for everything else, my iFixit kit probably has it, and they even have a 1/4” adapter for their bits.
I’m sure I’ll use the other sets for the superior magnet pass through though.
Surely using the 1/4th adapter loses you a ton of magnet eh?
The handypeople of discord have been keen to point out that the sorts of things you'd use the precision bits from ifixit kits on, are not things you'd want to be using a ratcheting screwdriver on in the first place, even if the adaptor allows you to.
yea
@versed crow Jerry rig everything knife just restocked
Today's the 20th, I'm in the first round, but no shipping email. 😿
Yeah I tried it. Very minimal magnetism passthrough, but nice to have just in case.
Perfect
Anyone else get 20 emails saying the Jerry rig knife was available? 
They must have sent my email to you cause I didn't get an email about this knife
To anyone who already has the backpack: Can one of you quickly measure whether an object with size 11" x 4.5" x 3.5" would fit in the water bottle compartment?
If I can find one, ill let you know
For me, I'm not convinced they even shipped anything. They printed labels in hopes of shutting wave 1 people up.
Got the label printed last Friday for screwdriver and it’s out for delivery today. Backpack shipped the same day and says Thursday to Florida.
What's your backpack order #? Mine is 3346xx
Soon
#3323xx
When do the screwdrivers ship out?
Mines out for delivery now, black shafts still haven’t shipped
Depends on your wave. Check the product page for that info. Wave one are currently shipping. (silver shaft only. Black shaft will be later.)
Wave 1, got a delivery date. Wednesday. 
Wave 1 backpack delivered yesterday, but I might not see it for another week 
Black shaft screwdrivers will ship in a week or two
Nice forgot that they covered that. Still gamebit and JIS are important for me
So I'm keeping my ear out for announcements about those bits being offered
Unfilulfilled babie lfggg
same lol
that be a lot of bit sets
It was a gift. I just went full send
fair enough
Do you guys think the stealth or classic water bottle matches the backpack better?
Just bought a mystery t-shirt and mystery lanyard!!! Expected delivery 2-4 weeks YAYAYAYYA
Why so long?
canada to UK
It takes almost 2 weeks to go from Canada to the US for me
Lttstore shipping has been SLOW with almost every order I've ever made
i only had 1 shipping option
stealth (haven't seen them in person though)
Outside North America?
?
The shipping I mean that could account for the wait
mobile page for the site should have a button to go to account menu
Have to click on cart and scroll down to log in
I have mine too but I ordered oct 11 in wave 3
😔
alr i will email complain
bogus
do u live in canada or something?
u got yours surprisingly early
im wave 1 and mine arrives tuesday, although it shipped about 7 days ago and had to deal with customs
so if u didnt hae customs it would make sense to get that fast ig
I didn’t realize what day of the week it is they will start shipping either next week or the week after
The more I work the more I realize I need the LTT driver lol
hah, I need LTT to colab with milwaukee on a useful electric m12 screwdriver 😉
downsize that and m12 power it...
I currently use a Panasonic driver like that more my job. But it isn’t practical for small adjustments and other various plastics where I can control the driver pressure. Also low back force since probably 70% of the screws I use are in machined holes
i had to swap to a m12 impact turned down after I killed the batteries/motor on that one - it was nice it fit in the screwdriver hole in my carhartts lol
but the impact is way wrong for 99% of what I want it for
Fair. Im fairly skilled with an impact from when I was a carpenter and then a mover, but that doesn’t mean I should use it on a M/B even though I’m confident in my ability to lol
milwaukee was nice in that it the torque dial there was actually fairly right - 5 was like 5in/lbs 20 was borderline strip the screw
What do you work on?
Did anyone else notice that according to DHL the backpack should weigh 25,676 LB, aka 11,64kg?
overhead doors; so little of everything from working in electric control panels to welding up dock plates and everything in between
volumetric weight - they have an average weight/cuft they apply
Interesting. I had a chance once to apply for them I believe . Instead I’ve shifted to repair. So I’m fixing thinks like scanners, forklift terminals, timeclocks, card/receipt/label printers.
meh 20some years later old dog new tricks scenario
Alright, how silly of me to think that they would then also call it that way, let alone use an apropriate unit 😄
Not sure how many people will get this one, its Myself, an Ansible Author at Ansible Fest, With Jeff Geerling, Ansible Author, Youtuber and him seeing the first LTT backpack in the Wild
We called it a memeable moment.
Jeff is cool!
I read his book years ago to learn Ansible
I’ve also enjoyed his transition into YouTube
This is mine that came out a few weeks ago, about the Tower/Controller and the rest of the AAP 🙂
https://www.amazon.com/Demystifying-Ansible-Automation-Controller-definitive/dp/1803244887
Oh nice!
And he was really cool, had a nice conversation with him, and he was a big hit at AnsibleFest 🙂
Is Tower the commercial version of AWX?
Yes, Well, Controller now, the Ansible Automation Platform is Ansible: "AWX, Galaxy NG, Pinakes, the new event driven stuff" + Keycloak and the postgres database for them.
Ah ok
and the book works for both the AWX + stuff or the Official products, just I refer to it as the product name vs Upstream
I guess AWX is actually the open source Tower
Awx => Tower 3.8
Controller = AWX = Tower 4.x+
We started using Ansible at work for our non-containerized workloads
Same exact gui, Same exact features, just Remove python Venv, and add Execution enviornments, and marketing changed a name
The big missing piece is AWX
There is a lot of companies doing all command line, no awx, the advantage is workflows, RBAC, and centralized logging of jobs, are the big Pluses, that and a central place to organize it and specify where stuff runs. But in the end its still just ansible playbooks.
Yup
As we scale, we will need AWX
I’m honestly surprised that we’ve managed to get quite far using Ansible without some central system
We’re doing the same with our terraform, and really struggled without CI/CD there
I've seen banks and multinational companies using ansible for a while and just start using awx/tower/controller
That’s a surprise
Its more they start there, and then they grow and realize they need the centralization.
Did you chat to Jeff about the LTT screwdriver?
I did not, we got talking about book writing and ansible.
Illinois
Nah, I know someone who ordered wave 1 and got a C
they also got bag 5xx
but did not have an order that early. like, they just got theirs last week
numbers are random for sure
I wonder what my lucky bag number will be...
Mine is #362xxx as well yet it hasn’t even shipped
There can’t be two of the same order number
Just got my Bag, wave 1 in Canada.
😵
After 3 days of Canada post saying "Out for delivery" they finally decided to actually deliver it
Point being that I ordered within the same thousand
Nice
So my DHL guy went to Canada post? 😂
what color did you get
I'm getting pretty damn pissed off with my backpack shipping at this point
😈
what wave are you
A tracking number was created on Monday but the tracking still says that they haven't received it
Rip
Not sure if this is new or restock, since with store changes restocks seem to be appearing as new on my bot.
New item for sale: Shoelaces
https://www.lttstore.com/products/shoelaces
ha thats a cute box
Oh this is cute, and as a bonus bin item I could conceivably get and use them. Actually sitting down and putting everything through the proper loops is a bit of a chore, but my old laces have some crusty bits so probably worth doing.
If that’s a bonus bin item I could really use some new laces
How do I decide between waffle and workshop lol.
One is comfy in general, one is functional for certain tasks. If the later scenario applies, I'd lean toward function.
No no I get why. They’re just both appealing to me lol. I’ve already got the indoor hoodie. The workshop jacket I could see myself using sometimes but not all the time. I probably will go for something else entirely honestly, I’m just looking at these options
The multinep shirt is also appealing
I’m a little bit of a short snob for quality with few shops I trust. I can probably trust LTT, but don’t actually have any of their tshirts yet
I'm actually wearing the long sleeve short circuit shirt right now LOL
That one also looked appealing
Frankly I like all over print shirts.
Was never a simple tshirt guy
The arms on the shirt are very long, but it is still comfy.
Oh. You can’t make a merch message if you’ve applied a gift card
Oh actually you can but you need to leave and re-enter the cart
First 40oz water bottle spotted in the wild, being used by a gate agent at YYZ
im having some trouble finding replacement blades for the jerryrig knife, can anyone tell me where i can find them?
preferably in toronto, ON
https://a.co/d/9WipKMD
American amazon but this is the thing you're looking for
utility knife blades
ok thanks
https://www.amazon.ca/dp/B07KH3R8YS?ref_=cm_sw_r_cp_ud_dp_BYW8X4GKENDKC8EY3YM8 they are avaliable in canada too
just to confirm, these specific ones will work for the jerryrig knife right?
standard utility knife blades - any home improvement store 😉
home hardware, home depot, rona, etc...?
Yeah I would expect them to be everywhere basically
im not canadian idk what places are there
Bumping this because no answer yet... I’d really appreciate it if someone could check, thanks! 🙂
yea those or even ones from a doller shop, that 'format' of replacement blades seem to be most hardware or mechanical shops also
based of those dimensions it should, the 'water bottle section' is just a sleeve that can collapse flat against the side also
Back with silver shaft and a black and orange with silver shaft
Any updates on ships?
For bakkers?
think they mostly still float, otherwise they become wreaks...
you wreak!
If it is a square It will not fit, the 40oz water bottle is ~3.5in in diameter and just fits when the holder is stretched all the way.
Yay, both my backpack and screwdriver are with UPS now! They’re off to Florida where a company will forward them to me.
I think I have about 2 weeks of waiting before I get all my loot
Ayy, finally got my wave 1 backpack delivery date
Mine says that it will be delivered Yesterday, October 21 by 7:00 P.M.
I am not joking.
They will apparently deliver my bag in the past.
I reloaded the page and now it says "The delivery date will be provided as soon as possible."
but that was funny
Hopefully it will be here today (it is 1:04 am). I had the bag sent to my parents house so I drove home last night to get it so I hope to get it before I need to drive back.
Same here
In a similar boat. Sent it to home, but I’m currently at college about 200 miles away
I am not that far but I left campus directly after my last class at 4 and I did not get back until late.
Funnily enoug somehow these updates didn’t show up till today
Even though ithapped like 2 days ago
What made it annoying for me was that I was home the weekends of the 8th and the 15th…. And I had the tracking number and such on the second weekend by Thursday evening… but of course it didn’t arrive by the end of the weekend (or really even move to what I could tell)…
I understand the shipping stuff they had that was out of their control, it’s just kinda annoying
Got shipping notification for wave 3 all black, silver shaft screwdriver now. Backpack been en route for a week and finally made it to LA presumably for shipping abroad.
Just got my notification from UPS that my Wave 2 Backpack left WA. Nothing on my black shaft screwdrivers yet on wave 1.
Was talking to my best friend whose husband works for a UPS depot. She said he's been saying that the Christmas rush feels like it's starting early because volume is much higher than normal for packages and it's causing some issues as they don't have their temp workers in yet or something along those lines.
WOOHOOOOOoooo
Whoops, I forgot to order bit sets...
Poor me. I'm going to have to put in another order. Guess it's a good excuse to get more shirts.
Thanks! That’s a bummer.
Your wave 2 backpack is shipping already? I’m wave 1 and mine’s not even with the carrier.
Just got my shipping notification for my wave 2 backpack. label printed yesterday
Is it possible for lttstoredotcom to have a estimated time of shipment in the order status ?
Because they approximately know where you are in the queue for your package to be ready
probably better not to
will just lead to a lot of unhappy customers because the eta was way too optimistic
so it will just eventually end up becoming useless guesswork that can't be relied on for anything
Hi guys , i was thinking in buying a desk pad , but i live in Europe and i noticed the 29.99 is the price of desk pad and plus 29.99 for shipping , why is the shipping so expensive?
Shipping directly from Canada without fullfilment center in Europe just plainly is super expensive.
How long does shipping take to get to Australia?
I noticed the same here in England, the backpack is $249.99, but with shipping and taxes added on, it will be £350, and can't even combine shipping with a mate, as adding another backpack will add another $60 onto shipping
and shipping probably is still subsidised for your delivery.
Hot damn, I am on a wave 3 screwdriver and it just shipped
mostly just because the volume of the box 😦
I think so? Website isn't saying which wave I'm in for backpack
looks like screwdriver wave 2 is shipping, got my email this morning
And wave 3* I got an email as well
Wonder if they are just moving screwdriver ahead while they sort out the issues at port with the backpack
3-5 weeks, depending on how long it takes to get through the US and Aussie customs.
same for my Wave 2 Silver shaft.
Waiting waiting waiting
What
Waiting
Bit holder for LTT bits. Credit to labtec901 on Thingiverse for the design.
It holds 24 of the LTT short bits.
I am thinking about redesigning it though, this is only the first prototype. I'm thinking a lid which has some kind of snap close mechanism so it stays shut and the bits can't fall out to the side.
you can also do a dual side box, where you can store bits in both "lids"
have it fold out into one board
or tray is probably the right term
True. I want to design a box which can hold 60 bits, or maybe even 72.
The hexagonal shape is predestined for lattice packing.
Hexagons are the bestagons.

Stringyyyy!!
Yeah, as I said, first prototype and not intended for use.
Wave 2 screwdriver tracking number created. YES!!
My screwdriver seems to be missing a piece, I saw this photo someone posted online and it is not the same as mine, Anyone that has their driver what does your look like?
I think I see what you mean. It looks like there should be a cover where you circled.
ya because there is space there it is possible for the lower bits to slide out of their holder
Looks like an error in manufacturing.
ya sad looks like ill be waiting a little longer
jinkies
What in the actual hell is going on with backpack shipping? I had a tracking number created on Monday but USPS still doesn't have it
canada post is awful lol
I had mine created around the same time, ups had it and then they backtracked that, because it was going through customs. Once it got through customs, ups got a ping for it in Tacoma WA
Just got home and checked mine, mine has the thing
I wonder what "wooden toys" are?
might want to tag nicklmg. Hopefully its not a widespread issue
Forgot an entire component 💀
I tweeted nick already and emailed support
oh, sorry I misread your message
Linus was exploring like a wooden computer case+components kids toy thing with magnets so kids could 'build a computer' awhile back. Kind of a thing he wanted, magnets and everything being made kid safe is not cheap so might not be a super high volume thing, but maybe thats what the wooden toys thing is.
That'll be exciting
Don't backorder it in hopes of a holiday gift
Trolled epicly
it kinda looks like its upside down inside of missing
Does anyone know if or when the LTT Party Shirt will be back in stock?
Starting to think I missed the bus on this one since I've been checking the last few months and haven't spotted it back in stock
Confident that it will be restocked, but when is a mystery with all the port madness.
LTT Kendamas 
That one is exactly what I was looking for! Thanks so much!
Am I the only person in wave 1 that hasn't seen their backpack ship
Looks like my backpack is estimated to be delivered on Halloween!
Low key hoping it’s the og carabiner design, I like the look of em better and would have only used them to lock so the strength wouldn’t be much of an issue
Wouldn't the strength still be an issue for a lock? Or is the issue not big enough to stop someone who actually wants in? I didnt buy one so i havent been following closely
The intent of them is just to 'lock' the two sides of the zipper together so you can have something sticking out (e.g. a badminton racket) without the risk of the bag jostling open, not to lock the bag shut as a contents theft deterrent (people would probably just steal the whole bag tbh) or as an attachment point for other stuff (they were never designed to actually support meaningful amounts of weight).
Hell yea. UPS delivering backpack this Tuesday 
im so hyped to kit it out with all my stuff
Nope, Wave 1 here and still only label printed.
@bold ledge my order number was 336xxx.
I'm 335 something, so I'm not much ahead of you,
Thanks for the confirmation though
I'm order #3335xx and still only have the "shipment data received" message on wizmo (I'm located in the next province over so usually shipping is only a few days after it gets on a truck)
Order # 3346xx. Been sitting at "Pre-Shipment" since Oct 18.
Still waiting for screwdriver to ship :(. Thought maybe it would be here in time for my new gpu but had to use a random yucky screwdriver 😂
Takes a few days to clear customs from Canada. Gotta use the link they provide for most up to date.
Sorry. Repeated info!
My gracious Canadian hosts have my backpack and will post it on to me in the next week or two 
I just want my black shafts to ship

Then I'm gonna wait until Black Friday for an LTT store sale to buy my bits
backpack WEN
Have you emailed support?
yes
Do they say “wait a couple of days”?
havent responded yet
I only asked on friday because that's when the email (which I didn't get) said bags should be shipped
is wave 3 for backpack and screwdriver still confirmed for the 30th ?
or any news regarding delays etc ?
Doubt it
They only work on businesses days aka weekdays
If I am not wrong
i was wave 1 for screwdriver and still havnt gotten any shipping info. are they delayed?
Fwiw I’m in wave 3 of screwdriver and got my shipping notification this weekend.
bruh
Oh that’s awkward message timing.
😭
Please tell me you ordered black shaft.
What version did you grab?
Remember they’ve said black shafts won’t be shipping until a few weeks after their respective wave.
My backpack finally shipped from Washington on Friday. UPS ground tho so it’s gonna take til next Friday to get to me 😭
ah
ok
thanks
Noice! I got my notification on Saturday and I’m in wave 2.
Black Shafts are supposed to either go into production or ship the first week of November. I saw nick tweet that to someone late last week

they said they were trying to get them out at the same time as the regular ones which were supposed to start shipping on the 20th
just going off this tweet
nice, I have two black shafts wave 3
and they´re gifts for my family back in Europe
only thing i want now is the backpack
im in the same boat
all black silver shaft wave 1, got my shipping notification on the 16th but it is just stuck at waiting to be picked up
trying yes but it seems unsuccesful
Lol
the move from waiting for pickup to shipping
is always extremely painful
Classic lttee, double classic that it's delay is on Twitter
the worst is ´´ shipping notification recieved´´
Yeah lol
But yeah I understand the challenges of bringing something to market so I'm not mad just excited
yeah i´m absolutely not complaining
im very used to long shipping from Taobao or Aliexpress
this is fine
or even groupbuys for keyboard, thats a different level of patience
For keyboard group buys, its kind of like a buy it, forget it, and then it randomly shows up at your door step like a year and a half later
They don't underestimate their shipping time by weeks and months thoe
hopefully they start shipping next week
Lmao. Have you buy a custom keyboard before?
Everything gets delayed all the time
No I would never buy a custom kb lol
Shipping Q3 2023, Q3 comes along, just kidding its going to be Q2 2024.
Well then they're shitters too
2024 comes along and they push it to Q3 2024
Baby companies act alike I guess
Which reminds me, I bought keycaps that said Q2 2022 back in August of last year and its still not here yet
Let's go, screwdriver delivered
Any other wave 1 backpackkers still stuck on label status "Shipment Data Received"? I thought they were supposed to ship out by last week
I think my W2 actually shipped out last week. I think it just crossed us boarder. I wouldn't hesitate to ask
Do you think the screwdriver can do 5/16
yeah I'll be posting a response on my previous support ticket. maybe the wizmo shipping is just bugged... 
I saw someone say that 1 wizmo isn't great. And 2 that if it's shipping to us the shipping doesn't update till it crosses the boarder cause different currier. Mine went from Vancouver straight to WA, USA
Wait that's weird. I look closer and it says Australia. So I'm a bit confused there
I don't see any other tracking I can use outside of the Wizmo link that was attached to my order. I'm in Canada, so a Canada Post tracking code would definitely be more ideal, and usually it only takes a couple of days for anything from Vancouver to reach me
if you don't have a canada post number then it has not been handed over to them yet
yeah, that's what I thought. it's been a week since the label was created :(
I will say according to the map mine went from Vancouver to Australia back to USA. That's a weird way of doing it. But i don't understand international shipping so who knows
when perusing Twitter for some info I came across someone who had the same Australia detour you did https://twitter.com/l3igwill/status/1584030270256078849
There has been shipping delays haha. Wonder why the LTT backpack went to Australia before coming to the states. @linusgsebastian @nicklmg https://t.co/ORWVXm77in
apparently Shopify tracking is mixing up Redmond WA with Redmond AU
I also had an Australian detour but I live on the East Coast and it left Vancouver for Australia. WTF
The wizmo tracking number works on UPS site too
That was a bug. Confirmed by the time between locations many on Reddit showed a similar situation however with only 2 hours between locations. Unless They employed supersonic jets to deliver backpacks, nothing has crossed the pacific in only 2 hours
A note though that once the package is handed over, LTT doesn’t have any countrol over what route it might take. But still can 99% guarantee it did not go to Australia
it is a UPS tracking number that is also in the wizmo tracking system
Kinda obvious when it's physically impossible for a package to take less than an hour to go from Vancouver BC to Australia in a normal airplane, pretty sure it also can't in a fighter jet
Plugging my wizmo tracking # into UPS gives me an error, which makes sense because my package is likely going to be shipped with Canada Post instead of UPS. good info for anyone else who might be with UPS though
and with kickstarter sometimes it's 5 years later
Ya but the "status updates" could just be delayed, I mean the time it took my package to go from Vancouver to "Washington" was 10 business days. Which also seems inaccurate.
They’ll probably have a whole batch of 15k black shafts I have imagine. So 2-3 waves worth for the black orders
yeah my w2 backpack gets delivered tomorrow
I must have misunderstood when the screwdrivers went live that the black shafts would be delayed. I thought they were just limited in production but ready made
yeah i just changed mine to silver to speed it up lol
It’s more like they’re made to order with a limited max quantity
I never intended to use it, was always going to just go in the junk drawer as the oh crap where is a screwdriver when kids toys need batteries. But the delay was longer then I expected for it. Thought I'd atleast use it to put in a new gpu lol
I always figured mine might be here in time for Christmas maybe with how things have been going lol. It’ll probably be here by thanksgiving
Would def come in handy for Xmas toys
my wave 2 backpack is out for delivery
Yes.
it’d be hilarious if they somehow allocated 300 backpacks for pop-up shops and also sold 10,000 online for wave 1
so 300 backpack orders somehow got stuck in limbo.
Interesting definition of "hilarious".
I also thought Linus dropping that Xeon CPU was peak comedy.
same with the entire Mac Pro debacle.
Reading people saying their wave 2 backpack is almost there while my wave 1 is not even at the carrier is kinda meh to be honest.
I like trainwrecks, what can I say? 
You like to see the world burn. Gooooood.
same. I've lost a bit of trust in their communications to customers now (what little they do, anyways), since they clearly weren't shipped in at least the wave order, and disregarding the "preprinting labels" explanation. I'm just thankful I'm not in a rush to get it for a specific event/travelling, like some others I've seen
Yeah, all I need is for it to arrive before December 20 or so, then I'm good. Their communication (or the lack thereof) still kinda sucks.
Man really took his depression and turned it into a mousepad
Stonks.
You can make money out of anything and that's the beauty of capitalism
(I want this mousepad but i have 2 euros in my account)
gee i wonder when backpack come
Damm now we have to wait another week
I got my driver but their was a defect with mine so i'm waiting for support 😢
what tracking app is this?
Shop
What's wrong with it
Mine is on the right, it means that the lower bits can slide out and rattle around inside the driver
I think that piece was installed backwards
!
Ah ok I saw you posted that earlier, didn't know it was the same incident
sounds about right, international shipping can be wack especially considering that was when it was crossing the border
Is there any concrete way to find out what wave you ordered from?
I was pretty confident I ordered in wave 2, but now I'm curious if I was in wave 3 and misremembered.
hm, looks like the letter on the box is the wave, saw some pics with 10000B in this channel from early October.
Just received it and first impressions, it's bigger than i expected and i love it already
Also the bitsets really look like gum packs
Nice, the ratchet feels amazing i'm just using mine as a fidget toy
wat
Hence the GameCube in the background
i totally forgot about those things, not much of a retro person
If they made the whole linehead and line recess set, i would buy them in a heartbeat
Or at least one ones needed to work on retro consoles
Actually shocking that there wasn't a "retro tinkerer" bit set ready to go alongside the "fuck you" bit set.
Just name them "fuck you" and "and the horse you rode in on"
What is fuck you set
Publicly they call it the "specialty" set but internally it's the "fuck you" bit set
Bunch of weird bits for specific things, mostly
I see
Think Nintendo's Tri-Wing or Apple's Torx security bit variants.
Could easily call it "Fuck you" and "Fuck you 2" bit sets, too.

backpack time
🤨
Checked my email. Drove out to the mailbox In the dark. It has arrived!!!
First impressions. I don’t think I’m going to have a zipper problem like my last backpack.
Did it come with the fix for the carabiners
Negative on fix. They said in a wan show a few weeks back they would be sending those later to people who already purchased and received the backpack
But I muscled the clip and it seems fine. I just wouldn’t hang the entire backpack from it. Which seems commons sense to me.
I couldn’t get it to break using what I would consider expected force for a zipper clip.
Came in a large box and with these inside. So it’s got the perfect shape still. No fold marks or anything.
Ooooh
Needed a nice zip up hoodie
Is the hoodie nice? I was thinking of getting one. Getting chilly out.
zipper fix before christmas? 🤡
It’s not bad
It’s in the wash now
But it’s reasonably warm but not overly so
So you’d need a jacket outside likely
But the fit and finish is super nice
YKK zippers
Cool
I don’t really see the issue. (Yet at least) I reefed on these and they didn’t break.
if i ever get mine ill haev to see for mysefl
👍
@cobalt hare @chilly tartan wait I lied. They are extremely flimsy when bent to the side. I thought they meant bending directly outwards.
Didn’t break mine but I can see the issue 100%.
Yeah I was surprised to hear that they hadn’t thought of that when testing
But they owned up to it
For quite a while, I thought the 'plastic air bag' contained linoleum tiles or pillows with linoleum tiles as design. Anyway, carry on. Just spouting out nonsense. Haha.
Waiting for my backpack, too. Wave 2.
You're telling me you received a wave 3 backpack?
I'm still not sure myself, but it certainly looks like it, if the C is any indicator
Wait are the numbers wrong as well!?
In which case it would be the distributor?
The best way to.guess wave is find the order time, look back in this chat and see what was being spammed xD
There's even charts somewhere
Although actually thinking about it should say in the email
348k should be very close to the border between wave 2 and 3 if I'm not mistaken.
Is that always accurate?
348 is shipped ?
Ah, found it
My wave 1 has still not been received by DHL.
it's what
told was the wave so was originally what we were going off
It does like it has potential to be not accurate for some reason though, based on looking here occasionally...
I'm 340 with addr change to 357 and no shipment info :(
No address change here, 336k
I mean my backpack is apparently 2205 of 10000C, which to me implies my bag is actually a wave 3 bag, not a wave 2.
Although not suee if some of that is shipping companies being shipping companies (it's taking me more time to get some national orders than some international orders atm!)
I don't think those box numbers mean kuch
Yeah but it still just says "electronic notification", nothing else. Or are you saying they just haven't updated it and it's already on the way?
It'd help if someone had a picture of a Wave 1 box to compare, if it's just X of 9700 or X of 10000A then that'd pretty much confirm it.
there's a picture from someone here on October 4th showing a X of 10000B, and in addition to that, the 10000 Part is also handwritten, whereas it's printed on my 10000C box (and every other one i've seen)
As in label created but not shipped?
Mine was 1199 or something
And can't remember how the first 250 was included
#lttstore message An example 10000B box
Yeah, but a wave 2 backpack on September 21?
I doubt it.
I hate to say it but I think this is not out of the realm of possibility.
So yeah, there's definitely been at least 3 unique waves.
If we assume letters actually mean something.
Which I still doubt.
But sure.
I'm gonna ask Nick on Twitter later whether it's normal for my wave 1 bag to still not be at the carrier.
It's definitely not normal, full stop.
There's no logical reason for late wave 2 orders to be showing up if even a single Wave 1 bag is in limbo still.
Yes, but there's a couple people I've seen who've had the same thing happen.
Big boat.
maybe LMG can give y'all special 1 of 300 edition backpacks 
Or wait. Do you think it could have something to do with international orders?
I. e., transatlantic orders
It's possible
It'd require knowledge of where the people who haven't gotten their shipments live
I haven't seen a single person post that they have received their backpack over here in Europe but then again I haven't looked everywhere for info on this.
if even one person is in NA then that falls through.
someone earlier showed a pic of a youtuber in AUS with one
but that could just as easily be an influencer-provided one
similar to the screwdrivers
¯_(ツ)_/¯
Oh, maybe.
Just emailed support. I'm interested what they'll say.
@bold ledge yo, have you received any updates by any chance?
Nope
If I may ask, are you in North America?
Yep, I live about 400 miles away from Vancouver BC
Okay, so my theory regarding transatlantic orders fell through on every level.
Thanks for the info!
No problem!
Also, what's that app?
I thought they were supposed to receive all the backpacks the week before last, and then ship them out last week but nope apparently not
Shop app by Shopify
You're probably 3359xx, right?
It is either that (the shippers grouping by country say to save cost) or the distributor i guess?
I have no idea how you guessed so close but yes I am that exactly
I'm 3360xx, so it's likely that the high 335s and the low 336 are the stuck ones.
I have (Continental not EU though) and I think I've seen a few others who have but forget who
That's good to know, thanks.
This guy who is order 348999 already had his backpack and mine hasn't moved in a week
https://twitter.com/Thorok117/status/1584536930229723136?t=T2DtvpTzhwCPRLH5qNctfg&s=19
@languid breach
That's kind of BS imo
I guess I'll send support another message, but the last time I sent them a message, their response was essentially "sorry, too bad for you"
As I said, I emailed support. I'm gonna update you if I hear anything if you want.
Thanks,
I mean, I'm not normally the nagging type, but I paid 250 plus 100 dollars for this thing.
Yeah, especially when Linus said on wan show more than once how great support is, and yes I understand global shipping and ports are all screwed up and that is out of their control, but the message that support responded to me effectively told me nothing
Even a, "here's our best guess of when this will move into the hands of USPS" would have been way more helpful than the response I got
Yeah, I was very patient when they said "ship not in port, can't do anything" and also when they got all the containers into their warehouse at once. No problems at all. But when I see wave 3 orders shipping, I'm starting to wonder why that is and if they maybe forgot my order or something.
I know wave 1 and 2 backpack are not completely shipped out but, will the wave 3 backpack be on time ?
At this rate, I doubt it, we are both wave 1 and still haven't seen our backpacks get shipped out
The one thing this is teaching me is that once again, pre-orders are a terrible idea
Friend's wave 1 box has a C on it. Most likely internal
I'll supposedly be receiving my bag today, I can double down on that
Worth mentioning mine came via UPS (brown truck carrier), not USPS (The Post Office)
the idea that they're going to be handing these off to USPS is dubious at best, and downright dumb at worst.
So I'd get some clarification there.
Did anyone get UPS shipment updates, for any type of order anywhere yesterday?
just curious. I have other UPS things that are supposed to be delivered very soon yet haven't updated to even be in the local area...
My tracking number is a USPS tracking number so idk what to tell ya
Yeah I'd be questioning whatever Distributor is handling yours if I were at LMG lol
the USPS has the slowest customs turnover time for international packages, compared to UPS or DHL
I shipped and someone shipped me something yesterday with no issues. Initial tracking update on both packages was quicker then expected if anything.
My backpack order 3270xx would have been one of the first 1,500 backpacks shipped in early September but the address change led to order 3558xx and the arse end of wave 3 (backpack 4870 of 10000C)
No shipping info?
Tbh Im thinking if the shaft of the screwdriver is gona fit in the new nvme gen 5 heatsink screw holes these things are narrow and the heatsink is very high
I'm # 3346xx. Live 250 miles from Vancouver BC. Stupid backpack has been sitting in Blaine since Oct 18. USPS tracking. @languid breach
have they given any update on the zipper replacement for the backpack?
haven't seen anything since they talked about it on wan-show
I don't think so yet
latest I remember was still working through options. then I guess once they decided they will probably try to bulk order and announce what will be coming
Also, Interesting, this may explain why some screwdriver orders are 'out of place' https://twitter.com/nicklmg/status/1578811863655411713?s=20&t=jJ548q2DiXBbo31GPgYgBA
@RvMouche Is it black and orange handle? We received all black handle first and we ship as they arrive from production
Ahhhh yes , finally backpack and screwdriver shipped together, in transit nw
Is it normal my ltt backpack is on Australia as a USA customer xD
I think it got on the wrong plane or something haha, 😎
i've seen some impressive nonsense here but this is extreme XD @astral thunder
It's back in USA finally but yeah it was in aus xD
I went Canada, Australia, USA

It never want to Australia there is a bug and the software think it's Australia but it's in USA
It's on site too for me
Like official tracking
Oh wait
Maybe not!
Idk site tracking down for me lol
Guess it shows up when it wants to
I asked yesterday. Something like both WA and Australia have the same name of a city and it picked the wrong one
Ye
time for you to petion your Gov wrt the taxes.
Robbery lmao
at this rate i'll have to uninstall youtube vanced to stop the nightmares of linus calling me a privateer
Lele
idk, it's a preorder, they did make it very clear that delays happen, so if you actually did preorder, you don't really have much of a reason to complain
though when it comes to people in waves other than 1 receiving it before you, I understand why people would complain, because that's not right, at least not without an official reasoning from LTT
other than that, you should know what you're getting yourself into... most (or all) of the delays are well out of LTT's hands tbf
??? the tax rate is decided by your government, not LTT
Idk but when i paid for my grip skin i'm 90% sure i didn't pay 20 euros of taxes
you pay a % amount of the purchase amount
also there are certain things that have different tax rates
these things are a little different from country to country
in Norway for example we pay 25% tax for any purchase amount over 300NOK (roughly 30EUR), which includes shipping
so I had to pay $370 iirc for the backpack for example, because $50 shipping + the backpack = $75 tax
if stores could decide the tax rate, it wouldn't be a thing, it would be hidden in the regular prices instead (that's how businesses do it with what money they want to make, they adjust their prices accordingly, then tax comes on top, because governments also wants to make money)
Bruh i would get more utility by taking a vacation to canada, barging in the building, taking a bottle and a mousepad and leaving the money
Honestly a gift shop would be kinda cool if they didn't want to keep visitors away and if they weren't in the middle of nowhere
It's always a sight to see when someone gets their very first paycheck and learns what taxes are 🍿
strictly speaking, you're then legally required to have these products processed through customs when coming back home
either way, the point is still; LTT isn't responsible for those taxes, so don't blame them for it either
I know what taxes are, i'm angry they are that high
wtf, half my salary goes out to nothing!? what is this scam!?
Let me see if i can send them to a mate of mine in germany he might get better rates
which country do you live in, if I may ask?
because I doubt Germany gets better rates, I would guess the rates are higher actually
but it is just that, a guess 😛
Pretty sure he's American
The ignorance towards taxation is theft gives it away
Also his payment was in usd
My payment was in USD and I live in Europe 
all payments are in USD
Also his tax is 21%, that's not US 😛
wait seriously? ltt dosnt convert?
the payment provider and bank will convert it to local currency somewhere along the way
This
oh interesting, guess im the idiot today then
between netherlands and italy, it's actually one dollar higher in italy
but it's an insane nightmare to manage multiple currencies
f*ck me then i'll keep my mouse on the bare cold wood
ugh, my bad
call me a weirdo, but I don't think the taxation on that order is particularly crazy 
but generally, you're much better off purchasing within your own country
ive seen worse on cablemod =\
or I guess within EU if you're in Europe and your country is member of the EU
I mean if it was in a store in the EU the VAT would still be in the price
because these tax laws exist to make sure local businesses don't get fucked over by businesses in other countries, or well, at least put some brakes on that problem
40 usd 4090 gpu custom cable, add on their automatic 20 usd dollar shipping, state taxes, and their "well see here you live in the middle of no where so uhhhh yea sorry buy more crap or we wont ship you anything"
so a 40 dollar cable comes out to be about 150 dollars
yeah, but afaik LTT also has to pay VAT to Canada, which means it's double(?)
not sure about that though
never looked into it carefully, but that's what I've figured from what little experience I got
I don't think so, you only pay VAT for the country it'll eventually end up in IIRC
rofl, I would much rather make my own cables than buy through cablemods or whatever, but definitely can see why many wouldn't - it's A LOT of work
well, if I started a shop in Norway, I would have to pay VAT to Norway for the products I put in stock, then I will charge the Norwegian VAT rate to cover that, but customs in the destination country will also add their own VAT on top of it
I think
i mean it's not bad but paying a hundred on a bottle and a mousepad doesn't feel great. kind of the opposite of differential price framing, actually
shit i need to write that down, another idea for my master's thesis.
so, this is proof it's working to keep businesses running locally as well 😛 because now you have $100 you can spend on stuff in a store in your own country
not so much to canada; but usually the shippers pay the vat to the country on the receiving end so the delivery service isn't standing at your door with their hands out demanding money or no product for you for customs/tax charges.
that's besides the point I think, because I was also required to pay VAT upon the package arriving 😂
yeah, all the great dutch youtubers' stores like...
...kwebbelkop?
so either the store you buy from doesn't handle the taxing, and you get it through customs, or like LTT, they handle the taxing up front so you don't have to when it arrives
though apparently somewhere along the way this fails lol
Then it was a bad shop? Then they didn't use the IOSS system, with that system you pay for the tax at order so you don't get the surcharge + tax at customs
it? as in LTT? 😛
most of the time these days; seems like the broker/taxes are figured in; not like 20 years ago when the mail delivery person was demanding cash at your door. lol
I was talking about LTT specifically here
> Dutch YouTubers
Oh damn
Wait so you paid tax twice?
That's not right
you obviously get a refund, but it's not supposed to happen
that's the whole point of the store charging tax up front
Yeah then something went wrong at customs
yeah, not sure why or what, I know very little about how that system works 😛
I'm still waiting on my screw driver, I'm in the first batch but it still just says Parcel Scanned in Terminal
😢
all i'm saying is this wouldn't happen with dennis at the lead
Liao Tech Tips is the best way forward
idk what you're on about
no that was just a shitpost
I thought it was funny. Just like Dennis
ahh, I didn't get the joke either tbf
my sales tax is 6.2% 😮 that seems high on that picture dam lol
21% ^
There was a point in life my state didnt apply sales tax on online orders haha, was the best.
When like ebay and new egg and amazon first kinda kicked off, it was like 2 years of it or so and they updated laws after people bought tons of stuff 😄
yeah, in the US afaik the tax rates differs from state to state
it also differs whether prices are listed with or without taxes lol
Are you ashamed?
He never said not to lol
from my knowledge you are suppose to pay the taxes it from not to, and that why there was that big newegg issue cuz it didnt do the taxes because legally you are suppose to do and claim it in usa
not sure what you're saying
like, if the store in cali, you pay cali tax, not your state
ooh, yeah, that's probably the case indeed
In Europe it's not like that, if I order something from Amazon.de in NL I still pay the NL tax rate
Whenever traveling, if you buy something new in another country. Make it looks used
Buy a new iPad? Put a worn case on it with stickers
isnt that VAT tax? that something different
Bag? Put pins on it
never been an issue, it probably rarely is an issue - at least not in Norway
unless it's obvious it's expensive and new that is
no honestly, i turned it off and got hit by two one minute unskippables immediately
VAT op products is similar to sales tax isn't it?
The point is only making it look not new if you got it new.
Learned this from I think a datahoarder discord and people who travel often
but I also don't travel much, and if I do, I don't really buy expensive stuff
Might’ve actually been on Reddit
yeah, it does make sense though 😛
I already knew/figured it though tbf, because I've wondered about getting a Valve Index for example, and know one of the few ways would be to have it shipped to another country and pick it up there 😛
Basically make it look like a personal item
Especially if you plan on using it as a personal item. I Ofcourse wouldn’t recommend this if you’re trying to make money
Getting caught there would be trouble
Indeed
it's not if you get caught, it's when
Another note. Don’t carry pirated content on drives. If possible leave a server at home and then download the content at the new place.
do they actually go through your drive if you have one? 
just encrypt it, and say good luck 😛
Probably fine if it’s like a single 2 tv drive. But I’ve heard stories from others about customs checking drives and data
but yeah, bringing any illegal items, physical or virtual, across the border is begging for trouble 😛
Encryption can apparently be worse. Or they force you to remove it unless you can prove it’s very private business content or something
yeah, they will probably be like "yeah right, now we REALLY NEED to get into these files"
I’ve wondered about my GOG collection. I own it all online, but have the files downloaded. And might technically be able to prove they’re not pirated. If I was moving country
build an algorithm to split the data up into family photos or something 
I could just redownload, but gog doesn’t allow you to download the old versions
It could look like pirated games.any oirated games are the gog versions
it probably does depend on the country you're entering though
they will have to prove it's pirated though
Just thinking if I wanted to move.
generally is quite easy to prove when something is pirated
but we're getting very off topic from LTT merch now 😅
Not if i say I’ll be storing all of this in the roomy lttstore.com backpack!.
If I ever decide to travel I probably will order the bag
Given it’s holding shape and size
I’m a very portable electronics user. Was wondering if the water bottle pocket would be suitable for one of those large capacity long power banks (though I probably wouldn’t be able to travel on a plane with one.)
Like one of these.
hmm, batteries and planes don't go too well together
There are slightly larger/longer ones
at least not hand baggage
Yeah I get that. But say I decide to do a backpacking trip across Europe lol
yeah, not sure I would use that pocket for that, there are plenty other places to put one 😛 but it's pretty heavy, so I would probably want to keep it closer to my back too
Trying to move close enough to work that I could potentially bike there. If LTT does a slim edition of the bag I might get that
Your going to wait a long time
Just don't "backorder" (preorder) it
i dont think ltt will ever make a slim edition
they made this one with solving a very particular hole in the market they saw
and a slim backpack wouldnt accomplish that
Nick did make a handful of posts regarding backpack shipments on the forum last week. Apparently part of the issue has been them largely being set up to expect ~10k backpacks at a time (i.e. the originally planned wave), but the port madness resulted in them getting more like 25k backpacks (and another 20k screwdrivers) all within the same week which has made an already messy situation even more difficult.
(They're kinda scattered around a couple threads, but nicklmg has a pinned post, so just visit his profile and view his posts from there if you want to see first hand.)
Still waiting :-(
Pffffff
They're still having the bug?
To be clear this is going to NJ
That's been a bug since like the first one shipped it shows some city in aus that has the same name
Ohhh
That’s funny af tho
I could have gotten to say my backpack when the Aussie land before I did
where do you go to see the map tracker?
That screenshot looks like the shop app
I'm 3335xx and I'm still in "label created" limbo...
Redmond, (W)estern (A)ustralia versus Redmond, (WA)shington
Just a tracking bug rather than it actually crossing the pacific each time
Linus has mentioned potentially visiting the idea after so many requests on WAN. It would be quite a while though
thats a big box for a screwdriver
ltt screwdriver backpack edition?
average twitch sub
Yeah the Rgb hoodie is nice and warm
I GOT MY BACKPACK!!!
Black shaft wen
Unfulfilled
They said they will ship beginning of Nov likely
For the black shafts
Personally I think I should have gotten the all black body with the silver shaft
The orange on the orange and black is a little more red than I was expecting
Imagine if you had both coming around same time so they just preload the backpack with screwdriver
finally got one
That is what happened to me they delayed my screwdriver so they can put it with the backpack , nw both in 1 box
Already shipped
I got a 40oz stealth edition to go with my backpack that’s on its way and I am going to get a 64oz green and gold when they are back in stock with new ink
im waiting for my backpack and screwdrivers. Im originaly from EU but now in canada for studies until christmas. I would have never bought anything from LTTstore due to shipping prices, duties and fees
But since im in canada i kinda need to make use of no duties and customs bundled with cheap shipping
I’m in the US so shipping is usually about $20 which isn’t terrible if I order a few things at a time
Yeah im in Nova Scotia, the local tax isnt great but shipping here is about 10cad and its quite quick
I wish they make all dark blue screwdriver silvee shaft
this is the way
I think we need to request more discreet packaging for the backpack because I have seen multiple people say they have had theirs stolen.
well if it gets stolen and you have enough evidence youll get a new one.
Here in all her glory
But if it didn’t say what it was on it it probably wouldn’t be an issue which would be better
I ordered my backpack October 11th and got it October 20th. Logistics messed up for sure
they have shipping insurance for sure
I think mine says arriving today as well. Very excited
Tf
That’s very fast
Plus I’m in Illinois so that’s including going through customs
wtf
I kinda want to get a case for my screwdriver
Once mine arrives, I’m gonna store it in my backpack
I gotta say
So far
All the little details are great on this backpack
Lmao discord flagged an image I just sent of the backpack as explicit for no reason
WAVE 1 BACKPACK FINALLY ARRIVED!
(Sadly I won’t personally get it for probably another two ish weeks since it was shipped to home and I am at college 200 miles away, but still VERY EXCITED)
hey its there, you dont have to wonder like some people have been
Yep, exactly. I’ve definitely been wondering… would have been nice if it had arrived by the weekend of the 8th or the 14th because I was home for both of those…. But I understand it was RIDICULOUS shipping stuff that was out of their control
Any word on those of us with "shipping label created" and no extra information in over a week?
just premade labels
i would just kinda ignore it, all it does is give you a tracking number for something that cant be tracked yet
Just sad. I got all excited and I'm still waiting for it to even start the journey to the other side of the planet
probably means its in customs
Customs. My nemesis.
2 days after i had shipping labels created, it switched to in transit, but while inside customs it went back to just shipping label created
and then 5 days later popped up in Tacoma
mine was a fair bit longer, still possibly customs but kinda long for that
I'm still waiting on a response to the support ticket I sent in about it yesterday
Mine's not going through customs, though that's not an unlikely scenario it won't be the case for all of them
If possible let me know what they say please. That way i won't send another ticket and keep Nick busy.
For sure. I'll keep you posted!
Personally I don’t think it matters. By the time someone can read that text, they’re already on the porch grabbing the box. They grab it because it’s big.
If it didn’t say backpack, that doesn’t mean they’d simply turn around and leave it be
A porch pirate goes around looking for packages to steal
i honestly expect less people to be interested after finding out it says backpack (if anything)
most backpacks are not worth anywere near this much
Big boxes are noticeable
true that
It’s simply the big box that draws attention to take it. The backpack is minimal
No way my bag is shipped
Congrats. Where’s it at
I just got a shipping notification. But it’s just for a multinep shirt beanie and shoelaces
lucky
I don't understand how LTT didn't import a significant amount of their backpacks and screwdrivers to the USA. If they are already paying a logistics company to do all the shipping, why would you import it into Canada and then send them across the border? If I were to guess, the vast majority of their products are sold to Americans.
Where will you receive them? Linus is already said multiple times that they don't have warehouses in other countries because of taxes and the cost is not justifiable
gonna bike 2 miles to work with my ltt backpack weighing 19.6lbs tomorrow I will update with my thoughts on comfort when I get there
not to long of a ride but It's a solid test
probably for manual QC
might also be related to how the shopping website they use works
they need to be the ones to ship im guessing
I finally got my backpack in and tried to shove as much as I could in it
Backpack gang
It packs up real good but the important part, its easy to pack, easy to unpack, and still feels good loaded up
Out on my first trip with it. Would recommend
Coming from a 200 dollar oakley bag
T-2 days until mine is delivered
Have a trip coming up in a couple weeks so this is great timing
@bold ledge my bag is shipping!
Oh dang, mine actually has something different as well!
Yeah, I'm at the same stage in shipping too.
Yours is gonna arrive much sooner though.
Any wave 2s for screwdriver get a shipping notification yet?
I’m all black silver shaft wave 3 and got shipping
I think the all black are a bit ahead of black/orange as they arrived first
Im hyped
I think they just went full send on all black with silver shaft and then orange with silver
And now they're starting black shafts
Which I understand is probably cheaper, manufacturing-wise
But my super early wave 1 black shaft, black screwdriver order is upset.
How so?
Its not considerably cheaper, probably not at all.
yea, it is probably moreso that's what colour pellets got loaded into the molding machines first.
Well Wizmo says my water bottle is still in Vancouver yet im drinking from it right nw
Just out of curiosity has a anyone gotten their silver shaft orange and black base?
Mine's been delivered to a forwarding agent, so in theory it's "been delivered"... but it isn't in my hands yet
I've got a label printed but nothing more, yet 😛

