#tech-chat-2
1 messages · Page 465 of 1
oh god
Then also depending on what heatsinks and ducting is in the server they may not even fit
its kind of a shitshow to be honest
its configurable
Its what
its a configurable shitshow
Its a configurabel shitshow when you buy new from Dell
trying to make it work 2nd hand off ebay is hell
just buy new from dell then
I don't think they have $20k
jUsT bUy NeW fRoM dElL tHeN
@devout ridge so anyway its just confusing af. And R740 was the era where not many people spec'd GPUs yet so almost all of the configs on ebay are without GPU
I'm confused. aren't risers passive components. as long as it's the right number of lanes and validated for the necessary speed per lane, anything else is just for finding a shape that fits your case best? 
R740 is also skylake xeons, which are meh
Risers in this case also dictate what bandwidth and power you get
well it also maps to CPUs
the Riser isn't just PCIe, but also power breakout for the card
its not necesscarily as cheap per unit, but also consider getting an 8GPU cahssis
You could also forego 3 x P100s and just get a big ram current GPU and do better lol
I would take a 5090 over 3 P100s
distill or quantized model
P100 is going to be dogshit slow
something like this, shove 8 GPUs in there, and its single CPU too
https://www.ebay.com/itm/277823435001
3 P100's is 250usd, a 5090 is not
yeah but at that point just buy $250 on a platform
P100 is going to be unbearable inference
Wouldn't get the same quantity of VRAM
P100 is also good price to performance for my other need, F@H (FP32 mainly)
😒
i would just not recommend building out a platform with that kind of hardware in 2026
i'm broke and i like experimenting, and that's the cheapest way to do it
you are correct @merry stirrup 1.35 performs exactly the same as 1.42 lol
looks like i do indeed have c die in a trench coat
lol
still maxes out the frequency of the 2400g’s imc so whatever
i am still looking at choice between B70 Pro (1300 euros), 2x 9070XT (1300 euros), 2x 5060 Ti (1200 euros), 2x 9060 XT (800 euros)
need to decide in ~1-2 weeks when i get my yearly bonuses 😄
Single GPU always
yeah, but harder to get (B70 for now is only in germany)
I'd also start looking at the mac minis/studio/amd jawns with lpddr5
those have very bad prompt processing speed compared to GPUs ?
You're not running production off of it, the fact you can get 128GB of "VRAM" and it does like 12-20 tps is wild
how many tps is usable really depends on your use case
the issue is that prompt processing is what kills me in my 1080 Ti setup - 300-500 t/s is what is limiting me. And jumping to 128GB Macs is insane jump from ~1300 euros 😄
check out the amd boxes
if you're running batch tasks at home or just testing code to be deployed elsewhere, lots of ram and low speed is fine. if you're running something that should actually serve some convenient real-time purpose for you, then... at some point if it's too slow you're just not gonna use it
i mean 20t/s token generation is fine. prompt processing at 300t/s when context is 60k+...
home agentic coding is all i do with it, with Qwen3.5 models
Yeah I think a 48-128GB mac mini has more utility than a B70 pro, so I always tend to go that way
ah, I haven't tried doing coding with a local model, but I run a local model for a bunch of other things - autocaptioning, translation, OCR. image gen I've played around with it for fun but can't really find a good local use for it
i mean luckily i can try m4 24GB at work
little smol but yeah
for speed comparison test
working on switching from those stupid cables to jumper wires
can't really figure out how fast the big models you'd run on 128gb is from that I guess, but might get some relative comparison
lots of ram makes it tempting to run big models, and then you realize the big models are much slower...
only model which would make sense in that memory range is Qwen3.5-122B-A10B (~65GB in Q4 quantization)
indeed, i can run that model on 128GB RAM, but it's slow as hell.
yea I haven't bothered trying models that big. I just run like 30b models in bf16/fp16 instead
lmao
right now on 2x1080Ti i run Qwen3.5-35B-A3B in IQ4 quant
I run that model for OCR and translation
OCR is an annoying thing because the model likes to get into loops and then you have to retry or split up image to try again. and loops make the task take forever since it makes it always hit the max token limit
for translation you might want to try Gemma4; but yeah, all i want is faster prompt processing pretty much, so instead of ~50 seconds for 25k initial claude prompt i would get 15-20 seconds
oh yea I just made a gemma4 version a few days ago too, seems pretty good so far
haven't tested if it hits loops as often as qwen3.5 did
I wish I could feed the audio from my security camera through a real time translation spanish -> english so I coudl figure out what the worker dudes are yelling about lol
well that's super easy because openai whisper model automagically translates as well, I'm not even sure you can turn it off lol
the worst part for those worker dudes are when you understand them. When my brother was buying his apartment, he was talking in Slovak with the representative of the seller, was listing the issues, the workers here were commenting in Hungarian, not knowing that is his native language 😄
explosion
I am not even outside but every now and then I can't tell if they are fighting or joking
you can do audio processing https://huggingface.co/google/gemma-4-E4B
Audio (E2B and E4B only) – Automatic speech recognition (ASR) and speech-to-translated-text translation across multiple languages.
Yah the prob is i dunno how to get it out of Synology Surveillance Station.. and, there's a good amount of wind noise, etc.
Guys they leaked the Linux source code today
very whelmed
I'm out of hard drive space on my main device(phone), wonder if you can run a RAM Disk Drive on Android 
clean out your storage dude
0 Byte free space
31GB of downloads.
Clean that shit up
I recently backed up like 5 phones to a hdd+backup
134GB of images
you need all that on phone all the time ?
If you've filled a 256gb phone, what you gonna get from adding 4gb of RAMDisk?
Nope thats why their backed up
can now reset the phones and usem as needed
do that have to be on the phone, instead of let's say a backup, on server and stuff ?
I just copied it all over for safe keeping is all
Each phone had diffrent pictures and such from over the years* well and my wifes*
So now if I plugged my hdd in it could be a server if I wanted it to or nas
finished the rewire
so much tidier
now we see if the LEDs blow up cause i’m running them at 4x the rated voltage
3v LEDs running of a 12v power supply
Toss a resistor between?
Yep, that’s what i did and they’re doing fine
just making sure i added a big enough resistor that they last long term
I forget how to read the lines been awhile
I have no idea, i just follow the labels in the containers i have
470ohm resistor
@merry stirrup will this help me tune my ram
yes, will let you OC to 69420mt/s
is the issue with running higher voltage just the increased wattage?
and that’s why adding a lil resistor makes it run just fine?
Wattage and heat, easy to pop unless there's a resistor or insulated/at a gauge that isnt going to melt/burn and depends on materials so always want to be within the circuits components threshholds. I'm also super rusty. To much resistance and the signal can be weakened or controlled sometimes depending what one's doing. Anyone feel free to correct i dont do electric often
lol a regular fell for the scam
Minecraft is a good example of this with its spaces of how far Redstone traveles with x loss and how you can change it with comparitors and repeaters
Same same but diffrent
for sure - but I want to do it real time lol
v=ir
its not a voltage thing as much as it is a current thing
they are current-limiting resistors
voltage is a constant input
so by increasing resistance, i decrease current, meaning less power running through the diode
yup
and at scale, the heat goes somewhere - where does the heat go?
into the resistor
That’s kinda what i meant, but with more exact terms
thats why resistors have a watt rating
One of the first checks if your circuit poops
i’m running the LEDs continuously while i’m nearby to see if i have any issues
the resistors are warm to the touch, but nothing crazy
They can last forever xD ive seen some super old ones
You're likely using 1/4-1/2W
bit hard to tell without a size reference, but i believe they are 1/4w
you need the spec sheet
12v w/ 470 ohm should be on a 1/2w probably
1/4w will work for a long time
@merry stirrup my buddy offered to trade me his 5800x3d/board/ram/3080 for my 7800x3d/mpower/a die
lol
ddr5 prices cooked
This won't have wattage though
wattage is size alone
Yeah they're 1/4w
it’s tempting ngl
Just dropping for future refs ❤️
Back in the day I ran low imedence (low ohm) fuel injectoirs on an ECU that needed high ohm. I had to use these ridiculous resistors to simulate the load
If it works
Yeah the resistor should be seeing about .3w, so a bit above what the resistors are rated for
smash em against a piece of aluminum or somethin lol
Not really a big concern for this little mockup, it was more so a proof of concept
if you leave the legs long on through hole resistors you can let them hit a housing/etc.
yah
yeah they will be like slightly dimmer
Lil heatsink for it
alright man i’ll set trfc to auto damn
really you target the resistor around the milli-amp rating of the diode
stupidass memory
20mA LEDs
600ohm would actually be what's expected
I'm running them at quite a bit higher amperage than they're rated
are they on constantly
Have been for about 15 minutes now
i mean by design
Honestly i'm just messing about with it, there is no real design
yup
Ideally i would be able to run them continuously though
its all about duty cycle
heh, doody cycle
if the led is lit 50% of the time the you can get away with higher current
20%, even more, etc.
Is the issue heat? the LEDs themselves aren't even warm
yes the diode breaks down
The diode underneath the little plastic cover
inside the little bulb
yeah
they basically have low/no resistance so you feed them current and they just eat it
until they thermally self destruct
The little relays i'm using are rated for 12v 3A, so they would indeed cook the LEDs if left without a resistor
well no that just means the relay is rated for 3A
it doesn't supply 3A
it supports a load of 3A
So it's that above 3a bad things happen, not that above 3a can never happen
oh yeah if you put a 12v battery in line with a 12AWG cable and involve that resistor to say a car headlight bulb, the relay will melt
Good to know
Yeah it's a little wireless relay with a remote
There are cases where you can cheat if you are pulsing a relay (almost like a transistor)
@devout ridge is it a mechanical relay
Looks solid state, the documentation is kind of nonexistent though
is it on that board
little tiny jawn
Yeah, those little PCBs in the background
yeah those are solid state
Each board is a single relay, running it so i can control each LED separately
That is the actually switching device
since its dc to dc it might actually just be a transistor
and them calling it a "relay board" or something
WTF Twitch
No 1080p?!
not just that, but why is there a 'location restriction' on twtich ?
Maybe if you are too far from a server?
nah, they geofenced it https://help.twitch.tv/s/article/stream-quality?language=en_US#regions
if i was 10 km to the west, i would get 4k NASA stream. This way, i only get 720p
maybe something something large amounts of bandwidth needs to be contracted weirdly
Regions that currently have 2k >viewing< access include: damn even the watchers are locked out
since theyre also owned by AWS/amazon, amazon probly manages to cut a lot of costs with being very careful about how they route a lot of their traffic in areas with weird routing and whatnot
yall wish you were as cool as me
Ew SueTendo
@topaz veldt but my 270K 
I've the same medal. Along with too many others. 😅
wassup
I meant buy lol
Oh - nah

I am back on track brother
@turbid locust try and find a 270K on amazon
shit, newegg too
Buy mine sell yours, better bin
@low sorrel Nuclear Thunder
SPAAs now have limited ammo and do rearm.
how mauch
and how far did you degrade it
retail
and not degraded at all I kept voltage limits on
what are your SPs again and how did memory OC go
97P 93E 63MC, mem went about the same as you. I think it’s an Apex thing atp.
hmmmm
I just kind of want it to go to an enthusiast rather than returning it
I would be losing money cause I next day shipped it lmfao
why you bailing all together tho
Generally just losing interest in Intel and want to spend money on other bullshit lol
that’s better for me ig
thats literally the crossroads I am at
well if you still want the mpower it’s yours
nice rig
Local surplus has two FIREEYE MGMT DEVICE HW-CM 740s for 350USD. 128gb RAM per machine. Worth getting and slapping linux on?
9950X3D2 is coming out in bit its like do I dump more money in a platform that annoys the fuck out of me
i would like it however it’s not super deep’s
It’s kind of on brand for you to have a rig you hate LOL
i was gonna buy the same 3080 with the us dollars from you buying the mpower + cpu
intel btw
It used to be AMD dude
you are better than this
then yeah we still good
yeah. i didn’t build it
AM4 and AM5 never gave me a single issue
okie
ram is hard for me but my mom has a ds3h wifi
so even with a 5800x3d it’s not optimal
might list my z890 shit on hwbot as a giga combo
I went 3900X early on and it was junk
Rip
what am i looking at
so
🤔 I had 1700 and then 3900X and then 5950X. only real issue was that 1700 didn't wanna allow ram speed over 2933mhz
work wants c states off by default
my 3700x on my b550i was horrid
we’re about to see so many returns it’s crazy
my 2600x on b450 was fine

yeah i’m gonna try and talk about it ig 😭
my patio project
They are actually putting pavers down finally
the moon
it's been a long time coming
literally is it even california compliant
because they have idle rules on pc power draw
offroad use only!
although idk if it applies to smaller-ish si’s
monkey never cramp
someone look that up pl0x i need some feasible point that is easy to explain
If you’re ever injured in an accident, you can check out Morgan & Morgan. You can start your claim in just a click without having to leave your couch. To start your claim, visit: https://www.forthepeople.com/Krantz
Join this channel to get access to perks:
https://www.youtube.com/channel/UCEgm-3RvRn4nCR-fGGVsfdQ/join
JOIN DISCORD N...
magnets are fuckin' cooooool
no, they are magnetic 
board problem, not CPU problem. Prime Pro X370 did work just fine with 3200 even with Ryzen 7 1700 (T-Topology)
i could never
that would make my 5090 be at 75W on the desktop
it doesn't do anything for me because of the mixed refresh rate displays with gsync off
@pure garnet law worked
oh word
lol reverted that right quick
it took me longer to find the damn law then it did for your boss to change their mind
fire
do you have this one
Nah, I've got a whopping 2 for that one. I don't travel often, nor do I trade often. Both of these activities require interacting with people. (ewww. 🤮 )
every single one is from opening gifts with people from remote raids
yeah well losing 14 states isn’t exactly great
i knew there was a law i just didn’t know if it applied
hence california compliance joke too 💀💀
HMMMMMMMMMMMM
.... ponders
@merry stirrup
i’d buy it
If the gpu ram and ssd survived thoughh, would be nice
i’d be more surprised if the board supported overclocking
i think the dude tried to flash john’s bios editor tool and broke it
this is also oddly tempting...
12.5x12.5x15" Build Volume isn't bad:
U gonna get ur money back with ram alone
what
~$200 ram (since naked dimms)
~$900 5080 used
either way parted out you can make money yeah
yur
HP zbook dock spotted
i like shopgoodwill because it supplies my stupid tech projects
but good lord is there some stupidly priced shit on here
bro i paid $375 for my m1
it's a bad website tbh. i still buy stuff sometimes but it hurts knowing they got it all for free
it's shocking how much some things sell for
shipping looks awful on all of the listings i've seen
part of me wonders if they have employees of the stores bid up
i'd say about 90% of the things i've bought have been more on shipping + handling than the item itself lol
like why am i paying $12 shipping on a $10 keyboard with no bids shipping an hour from my house
Likely because it costs that much to ship the item? Even the lightest of keyboards usually end up being 2-3 lbs after packaging, and at least the length and width and height of a keyboard, and last I checked, postal carriers charge $X.xx for their services so...
i've shipped 20 pound boxes for the same rate they're asking for feathers
Oof. That seems a bit much, but... maybe the carrier they use an algorithm that's heavily weighted to calculate based on longest dimension.
shipping my gpu from the southeast us to Vancouver was 20 bucks
oops should've clarified this was using fedex when my roommates mom shipped him one lol
Ah yep. That will be why. Don't get me wrong; FedEx, UPS, and DHL can be good at what they do, but they're expensive for everyday normal people who don't have active shipping contracts through their business departments.
i know not every company has amazon logistics but
damn amazon logistics is so good
free shipping on basically anything you'd want
very true
It's not free. 😉 Shipping is calculated into the cost of the product, and is only "free" for you / super cheap for Amazon because of the sheer volume of items they ship. Free shipping is like how "free" cellphones exist.
i hate fedex though (how did they deliver an tariff invoice before they could tell me where the item was located 😭😭)
arrrggg
i recently learned of it through William Osman
there's an LTT Jet subreddit, and people there hate linus more than the LTT Subreddit does lol
It's kinda hilarious how unhinged they are about it
lol
people do not like private jets
war thunder?
Yes
Oh I'm at work till 9pm mountain time
k
ive gotten their “1 cent shipping” on most of the stuff they list
whats mountain time surely you arent working in a mountain
but they have to choose to list it that way
i made an account for this only to find out that they typically get the exact same discount that ebay gives you so it’s more convenient to just go thru ebay lmao
@pure garnet i sold a proprietary hp power supply for a post fee and shipping profit of 17 bucks lol
not bad for a useless pile of rust
The haters will have a field day once Linus realizes just how cheap you can get a cruise ship for
they are just naturally hypocrites
They were looking, already.
I think Dan talked him out of that
made me curious, I looked and I saw supposedly $20 bids on a 40GB WD IDE hard drive
And $300 bids on a 6tb WD red pro
Very interesting...
Actually there were three of the reds, all bid around that price
does anybody have any goto guy on ebay you use for refurb sas ssd?
serverpartdeals
yea i figured you'd say that lol
just trying to find a TAD cheaper but seems like thats it
there isn’t any cheaper lol
there is cheaper but no guarantee its good
the problem is i have to buy in terms of vdev for any big growth unless i was to just buy a replacement, so i'm stuck with the 960gbs
yea..true. and his stuff has worked like a charm in my power edge
truenas?
storage arrays through proxmox…?
yeah
i hate it
not specifically truenas but other stuff, as well as ai projects. and emby/immich
I'm in the exact same situation, wanting to replace my old NAS with a freebsd zfs system, but zfs expansion doesn't seem mature enough and not sure how many drives wide I should do
yea i know its 'possible' with latest zfs BUT i wont try it on my critical stuff heh
zfs guys, we like being complicated and over the top
It works but old files will use the old parity ratio and take up more space, and also the free space accounting will be wrong (but still converge to zero at least)
the thing that drives me bonkers in proxmox is the non uniform use of GiB vs GB
i haven’t heard of any major issues with the ZFS expansion feature
truenas does it to, get used to it
me neither, but i also don't know enough people who've relaly done it for important stuff
literally impacts my effin provisoining
I think it's just too new
it came out a couple months ago now iirc
if it was catastrophic, we'd probably of heard of it by now though heh
that does bring me to a good point to consider. even if i was literally given a complete replacement of my array with 2x dense drives. how would i cleanly work into it? i can't add it. i'd have to replace
i have a 7 wide 2 deep raidz2
all 960gb sas ssds
If you're just replacing drives with larger ones? Or adding new ones to make the array wider
ideally to upgrade. financially at the time i was bound to those 960s
but...i could step into it, but i figure i want the path of least resistance. would it be a resilver?
You can replace all the drives with larger ones to get more space, that works already
like upgrade half, resilver, upgrade other half, resilver, then fully new drives on vdev?
2 deep.. is that like each of the 7 vdevs being a mirror of two drives?
wait what
Interesting
it’s not two vdevs, 7 wide in raidz2?
oh that's the opposite of what I said
did i say it wrong
oh so it is the thing i said
Yeah
no you said it right, people just often times don’t say it like that
they usually just say “2 vdevs” instead of 2 deep, even though both are correct ways of saying it
myb. so yeah 14 drives 960gb, i have 1.84tb usable
i did it this way to have more failure potential per vdev
Huh I should think you have a little more than 1.84T usable
oh wait hold on lol
that was my sas hdd array. about 11.84tb usable lol
sas ssd is
that is the one that's 1.84tb available after all the zfs overhead
Hold on how does the zfs structure work, is it a stripe of two mirrors?
yes, you cant do it this way though in the ui
it shows up in ui correct after but gotta use cl
so i can lose complete mirror 0 or mirror 1
but other pools i am just a 2 disk mirror
so i just double my resiliency at the expense of space
the spare is kinda a waste, it really only does something IF the array is marked bad. but i had 5 and really didnt have a use for it
ideally i would immediately take action if i got a notification
that config above is "raid 10"
oh wait, yeah no that setup is ... not ideal
wait no its not, thats ordinary
You can do that in the UI, I do it
Snail powaaaa 
https://youtu.be/XacbE4Uk1Vo?si=tIM-OMyP5kr5dGvY yeah im fucked
no XGUCWMG nor PG3 here anymore like where did it all run to
Take this and run?
dont crosspost
Huh wdym
dont post the same thing in 2 channels
Oh k
hey, hows Ed and Edd doing?
ALT+R
google nvidia overlay change hot keys
got it thanks
I love how YouTube insists on making their platform shittier
recent ui changes made it shittier
You have to sign into YouTube on the TV to control it with your phone now
how would you bin 100 dimms of h24m
i need to layout my spread sheet i think im gonna start staying late
probably bin for whatever the 8000 equivalent of 6000c26
Thought it would just sign in from your phone?
nah lets make ur life harder
okay, & just low volts?
Probably bin for tRCD as well
should. i just target a voltage for kits to hit and if so they get retested?
idk can you find info on god trcd/tcl at reasonable volts for h24?
like it would be optimal if i’m just setting something then putting sticks in & seeing if it at least posts on settings that id kinda care about
then find out at least the initial rejects cause binning 100 kits individually is going to suck
lol what
This is you, How is Ed and Edd doing?
Does it matter what type of 1tb ssd i get
yes
its ok
nothing special about it
but yes its fine
as long as you have an available m.2 slot
yeah
And can u tell me if anything’s wrong
sure
i found a msrp 270k and still no z890i so nah
kind of ass
you have 2 air coolers
Ram was outa stock and I haven’t decided on a case
Shit mb forgot to get rid of one
So thoughts fyi it’s in aud
but yeah those all work
Is it a decent build for the price
you can prob get a cheaper cooler tho
Oh damn, they're both good too.
Okay
Thermalright Assassin X120 Refined SE CPU Air Cooler, 4 Heat Pipes, TL-C12C PWM Fan, Aluminium Heatsink Cover, AGHP Technology, for AMD AM4/AM5/Intel LGA 1150/1151/1155/1200/1700/1851(AX120 R SE)
one for the cpu the other for the vrms so he can disable vrm throttling
they both perform great if you find that they are cheaper, they are cheap in USD so i was wondering for you
And I’m gonna get the graphic card for my birthday will u intergrated work for light YouTube and gaming use
Yep.
igpu gonna suck ass
Well, depends.
The same price for me
Which cpu were you using again?
Will it run tho
ight
Oh wait, the 9600X.
9600x
what game
Eeehh should be fine... Just turn everything down and if you can mod any game, use only optimization mods. Lol.
Bit of mine craft maybe rblx idk
yeah that should work
Oh Minecraft's easy to make work for that.
Okayyy but will YouTube and maybe Netflix run
yes
Oka thanks
Yeah, those don't care much about the gpu itself unless it's stupid old or something.
So they'll work just fine.
They are getting rid of samsung messages😭 
Oh yeah, a recommendation for optimization mods for Minecraft to try:
- Concurrent Chunk Management Engine (C2ME)
- Lithium
- Fast IP Ping
- Very Many Players
- Structure Layout Optimizer
- Krypton
- XXL Packets
- ImmediatelyFast
- FerriteCore
- EntityCulling
- And either Sodium or VulkanMod.
Okay thanks
I also recommend using Prism Launcher for managing the game, different versions, modpacks, and more since it would make things way easier to do too. Can even let you get mrpack modpacks from Modrinth without needing their app and such too.
@pure garnet you’re gonna have an entirely new hw inventory 😭💀
Ok but can a micro atx motherboard fit in a atx case
Should. They usually tend to have the same standoffs.
It will look kinda small in there btw.
Just in case the you in the future keeps looking at it and wondering if it was a good idea.
Just know it will. Lol.
huh
Yes, it's just a shortened name for it.
you’re just buying hw to replace the hw i bought from you realistically
oh nah the 980ti is just me wanting to play with gpus
real
Wait, what did you buy from him actually?
i’m buying his entire inventory deadass
bro has bought boards, cpus, gpus, whatever else
I swear atx motherboards are like 60 dollars aud more then micro
Z890 OCF
Z790 MPOWER +12900KS
7800X3D
B850 MPOWER
is what’s next
Dang, noice.
How much exactly do you have?
I’m gonna have to get a micro atx atp
They tend to be, actually.
a good amount
Not a huge amount but they go through daily hw about as fast as me
B r u h .
so it’s not small, we swap computers sometimes 2x+ a year
I swear some of y'all who aren't 5nail or Rogue have wild budgets for spend thrifting.
it all becomes clear soon
Please tell me that's only DDR3 or DDR4.
24GB DDR4 didn’t exist
nice 2x29 
making a spreadsheet today for binning next month ish
How in the world did you guys manage to get a hold of so much of those?
i work for an si and get buying privileges, you know what binning means yeah?
heavily relating to my overclocking
Oh yeah. Damn.
yeah so i’ll be able to buy the best sticks there
not necessarily mine but those r dead stock meaning i get free reign to use for quite a while, so im just gonna buy the best ones
980ti guy already shipped
bro wants that shit GONE
dude was ready to get rid of it 😭
5-10 kits or so depending on if others want
he had it priced to sell for what it was
yeah it wasn’t terrible ig
for some reason the mac vbios was a curse of ra that knocked money off
How much are they worth now then?
It just crossed my mind in the moment for whatever reason.
an amount
Fair enough.
idk if i showed already but 5090 master waow
wit da screen
highest end 5090 i’ve seen in a real build so far
haven’t seen a lightning in a rig yet
https://ebay.us/m/21mxC6
Is this a good deal
shit looks like a car fuel map
bro
you should SEEE ts on modern gpus
it literally is a fuel map in its own way
@turbid locust @pure garnet worlds best zeuser here
me and jerry are polar opposites of each other rn
what you mean
3060 suffering at 4k
im left with a 1080p monitor
Waiting🕥
I’ve seen a sealed iPhone 2g (first ever iPhone)
it getting 154fps in cs and val
https://ebay.us/m/3Qcgf9 seal windows 2
Time to become a valorant pro
augh man
MAN dude. MAN.
your experience is on par with guilty’s 10 years ago
that guy doesn’t even go through monitors like crazy
search for the incredible bro
yeah im highk being annoying and whining
but the monitor went searching for incredible
you had peak for like 4 seconds then never again
7 hours
7 hours is all it had to play with me
then it went searching for incredible
i’m searching for something incredible
guys are gpu fans durable? i was cleaning mine with a brush and it got stuck and pulled the fan with force out if its place then it flexed back to place when i took out the brush, it's working but could it have cause damage for the long term?
yes, no
fan r typically moe durable than ur fingers
They were looking at cruise ships?
Not yachts. I'm talking full ass carnival floating cities
lol floppa i just got a 550 ti for 13 bucks
i’m gonna repaste it and try to blow it up
2 ewaste gpu buyers in tc2 today
i bought a 980ti to kaboom
i mean
a gpu that doesn’t even support modern games and a gpu that can arguably still play most things at low enough settings
not quite the same 😂
i almost bought an a6-9500 off aliexpress for $8 because i really wouldn’t care if i killed an a series with voltage, but i found a mini hdmi cable elsewhere
so i didn’t need to get it for free shipping
mine is only going to be used in 3d mark
does the demo version do everything the paid version does? i haven’t used it cuz i didn’t want to pay for it but it looks pretty much the same in the demo
demo only has a few tests
you’re forced to watch the demo loops + a few tests only available
no it stops the bench
huh for timespy I alt f4’d the demo everytime and it just went straight
oh do you not have to watch the demo loop
when i tried it stopped the test
nah i just turn it off
does it have fire strike
i wanna compare my 2400g results to buildzoid
if you know where to look you can get 3d mark full for cheap
idk download and find out
yeah but i bought multiple useless pieces of ewaste over the last couple days so i gotta stop spending little bits of money all the time lmao
3d mark was on sale for like 5 bucks no
it’s $7 in grey market rn but it’s not important enough for me to want to spend $7 rn lmao
i wish my ewaste was $13
best deal i could find was $80 shipped but i wanted a 980ti specifically because maxwell was the last gen with user editable vbioses and thats the flagship of that generation
my other ewaste was $24 because i wanted a chromebook that doesn’t take a barrel jack (cuz im not buying a proprietary charger) to try mrchromebox on because j find it intriguing
i actually got one that’s listed on ebay for like 60 so not a bad deal
obviously it’s not worth 60 but you get what i’m saying
thing has 4gb of ram and a celeron n4000 which like
i’ve ran windows 11 on worse than that
i was considering rx580 and 780ti but neither were substantially cheaper to justify it
rx 580 was only $10 less for 15% slower performance
honestly as my 580 has sat idk how much i love it only because it sits in this weird zone where all modern games run like shit and all older games run maxed out
and it’s also an extremely bad bin
i’m gonna try and 3d print something like this on campus when it comes time to kaboom it
dude they can’t let me get ahold of a 3d printer i would waste so many hours building desktop chassis for laptop motherboards
my uni has one students can use
or custom cases for proprietary hp motherboards too
like it’d be sick to be able to use this to build a pc lmao
model a little shroud for the front io n shit
THOSE ARE SO SHIT
non stranded psu/non stranded board the cooler go thru board into case
and locked down so ass ram /cant even disable ecores in bios
- why would you want to disable e cores these days 2. obviously, that’s the point is that they’re dirt cheap
no one buys a proprietary motherboard thinking it’ll be GOOD
check this out @pure garnet oem lenovo lga 1200 board with a vrm heatsink lol
seems pretty rare to see something like that
some workloads they dont help 2 that add power draw
@wise bear ksp player count going to the mun because of artemis 2 lol
W game all aorund W
ocf on bench
yo floppa
hm
are you 21+?
y?
I just murdered jebeidah
I tried to make a space station
I need to tell someone about something but I have no clue if its relatable to anyone 💀
I made a space station once
is it freaky :(
its not very fuctional
no its about smoking
hit me then
I tried this thing called a timebomb
already lost me
Floppa aren't you 19
you put a tobacco in a pipe aswell as a cigarette
and you smoke the cigarette through the pipe
Y
^
because once you get through the cigarette you hit the tobacco in a pipe
and you get a really big hit at the end of the cigarrete
I love to suffer
its also gives you a really big buzz
still waiting 32” tandem
👀
Buy this
But it looks cool
i wanna use my dual monitor arm thanks
But look cool
it seems logical to get one and slap you with it
Yes and break another monitor
Is there much difference between these 2
Plus offers more ram slots and slots for USB or storage typically
I am thinking of buying a nintendo switch, but I dont know if I should buy the original oled model or the switch 2, do anyone have any recomendations?
i would buy 2 cause its the latest have better hardware and will get more games
yea, the only thing is that the games are so expensive
They are cheap for switch 1?
Best way to compare is to go to both motherboard sites, and compare the listed specs
Switch 2 like you can't go wrong
you went wrong when you considered a switch
Well.. I mean I'm glad I picked up my V1 when i saw it in the flesh
But that's obv not oled
the 2 would be the only one worth investing in since it’ll be the only one with future releases
I'll see you guys in GT7
Fuck ass rgb softwares
Wonder if they are getting paid. Or at least a free copy of GT7
I can't wait for them to use my body for some shooter game and watch myself get shot
Hmmmm...
pls give it a bath 😭
i know this is a dumbass question but what would be causing karhu to hang at the one hour mark
my trefi and trfc are literally not set
you gotta wait for someone with RAM OC knowledge to wake up
ten million dollars in $INTC
In a decade it'll be back to ten million dollars
the only guaranteed things in life are death, taxes, and INTC staying constant
LETS FUCKIN GOO
nice
I wonder if a wondows-compatible hdr cert is available for this tv
someone is gonna feel the wrath of my crashout at 11pm
send a warhead to their HQ
oh yeah it’s all coming together
honestly this feel more like the vendor than asus messing with you atp
just file a chargeback deadass
I DEADASS just went from being tired as fucking shit to flaring up like I just overclocked my entire fucking body
is this doordash
i paid 5.3 baconator combos for a 980ti
those fries are baller af honestly
I like getting their baked tater
dip that fucker in wendys sauce
if I dont get a response from this stupid platform in 18 hours Im gonna storm down to the fucking retailer’s shop and crashout
god dammit now I want wendys
chocolate chunk cookie
vs double chunk chocolate cookie
1 day worth of calories
we’re intel boys
Jesus fuck it's joever
Guess it's good for the shareholders tho
💪 18A 💪 18A 💪
Is terafab an actual project or just a concept
no idea
I'm not buying it. Lol.
it'll probably end up like those tesla tunnels in cali though
Like is Mr musk serious about blowing billions on a shell and tools
Or is he more of a scam alternativeman and wants to sign people up to help supply wafers to meet his goal
those are in cali right
The terafab would be in Texas where Tesla has already signed an agreement with Samsung to build out a huge amount of fab space by 2030ish
I just wanted to know if anyone knew what type of drive it was 'cause the optical branding is giving me different ideas.
So like there's basically a Samsung/musk joint venture in Taylor, Texas
I'm feeling like they will actually make some sort of fab, then deem it failure and close it down
My single stock doing the heavy lifting
He'll probably build an R&D facility no HVM
affordable products by 2070
he is stupid
broadwell xeon fo today
🤷
i bid 3$
would make too much sense
Hmmm was there a laptop embargo today
48gb of ram doe
Discord isnt a search engine
This is what it would’ve been if they googled it btw
Just judging by my YouTube sub box flood of snapdragon videos this morning
snapdragon server when?
i bet you can fit like 20 in 1u
How many NVL 52c can you fit in 1U
prob needs to be bumped to 2u
imagine if qualcomm bought broadcom
yes
Are they just taking the piss on margins to get some market share
48GB Asus laptop for $1600 ain't bad
and made broadcom less sucky
its on package ram
Imagine if Intel fabbed lunar lake in house and had their own memory fab
Could have bought so much market share
the snapdragon x2 elite or the snapdragon x2 elite
and price stability
optane 🤤
consumer optane sucked ass
16-32gb
you can still get it on ebay for few bucks
It was a solid concept
But I don't think Intel expected nand pricing to drop so dramatically so quickly
market it to gpus, direct storage on gpu itself
When it was in the works SSD was still relatively expensive, but by the time consumer optane came to market, QLC was dramatically shaking up pricing
This shit is sick
Actually I think one of the best uses was the Intel SSDs, like 1-2TB QLC and with 32GB of optane on board
of course
oh slay
see that's more my style
spray paint the nickel mounts
or get them gunmetal blued
yep that is not too bad of a usecase
wait can you blue nickel
no
darn
no like gunsmith blueing
but if only optane was directly accessable by ssd controller and not directly exposed to host like their m.2 implementation was
it was basically 2 lane to qlc and 2 lanes to optane
..copper mounting brackets?
oh those are stainless
can I blue those
bluing is just like what.... black oxide? can't be stainless
FUCK
Noo I'm meaning like, chassis or motherboard covers, or gpu backplates
i knew 1080ti "rt" was awful but wtf, ln2 for 15fps
Talkin' about looks, not cooling potential lol
cerakote is a durability thing
It still looks neat!
it looks like satin paint
lol i dunno i am not a cerakote guy by any means
what sprays wet and cures at like 150 deg?
paint
sputter titanium on it, then electro oxidise it to get whatever color you want

why not just plasma cut it out of titanium
blued titanium sputter would look cool on copper tbh
Even though you may not be familiar with them, magnetrons are at the heart of many of the manufacturing processes that make the modern world what it is. They let you coat anything in either a layer of metal or ceramic, so they find heavy use in the semiconductor manufacturing industry and many others. From mirrors, to filters, to microchips and ...
OH I thought it was the method where you blast metal powders onto another metal
literally just continual dragons breath
I think ave or abom did a vid or several on it
I know that alex damascus guy did a vid on it
look at alusil coating
Oooh
i wanna go sleep but im still fuckin fuming
so have a fumey sleep
that is metalisation not sputtering
ahh
sputtering deposits atoms
This reminded me to check inventory
hot (literally)
metalisation deposits many hundreds of atoms
I just ordered this
my friend is building his pc and his motherboard didnt come with the m.2 screw
any workarounds for that
you can order replacement sets for literally $2 on amazon
will the heatsink cool well without a screw?
"m2 replacement screw set" is what you search on amazon
as long as its making decent contect, yes
some is better than none
trust they're cheap as dirt
yeah ik but he wants to use his pc today
i mean he can
just make sure the heatsink for the drive has at least a screw in it if it's not a retainer clip system
how to land on the mun
rocket
i accidentally time warp rocket into mun
SOL
i gave up on Kerbal space program when my parachute deployed while rocket was at full blast 😄
classic staging sequence failoure
(yeah, i gave it a bit of time, but not much, have better things to do)
hahahahaha
oh god I remember fucking up all sorts of flights w/ the parachute staging
p a i n
Just sitting there making gutteral noises of frustration as you release the boosters and go for the main engine only for the chutes to rip off the cabin in atmosphere
SHIT
I ACCIDENTALLY DECOUPLED IT
accidentally did an tli
bro is stuck in space now
rip the Shitfuck and Jebediah
you can probably eva, go to highest point in orbit, burn your jetpack a bit untill you get 69900m lowest orbit and wait
the revert to launch button
spining jeb will decrease heating on him allowing him to survive re entry
shit
Jebediah will not be going home today
he can still make it
rip
user tried using discord as a search engine
qwq
thanks
Looks sharp
IT is incompetent
They created a sign up forum that couldn't be contained
- users can arbitrarily overwrite someone's slot with their own name
- users can arbitrarily add their own slot for a duplicate time
So even though I was the first person to sign up for 11am today, 2 other people overwrote my slot, and 5 other people decided to create their own 11am slot
On top of that, they are way behind on setting up new laptops anyways
Royal fuckup? Don't think I have seen that flavour yet, must be a new one.
god damn that's terrible 
Go back to pilot chat
ruh roh
I'm so fucking ready to be done with this latitude man
you must suffer a little bit longer
Well, switch to longitude then

battery powered and now with a status LED for power
reduced to 6v from 12v, so now i’m running smaller resistors
2/10
your wires are too neat
it was messy, but i fixed it
Wtf they dont use ticketing system?
what are you making? 
if it doesn’t look like a cs2 bomb an engineering student didn’t make it

