#tech-chat-2
1 messages · Page 395 of 1
I had some discord prompt that sad same name new look or something
But I clicked out, wtf was it saying
didn't we do that whole name update thing like 2 years ago
checking the patchnotes and I see this
I'd love this
whoa, wtf is vibing Wumpus
press Ctrl+Alt+Shift+W
how is this any different then how moderators can already bypass slow mode
i don't know, i'm not a moderator
i'm just reading the latest patch notes
I can't get this to work
nerd
man I can't really give the pa120 a hard time for its mounting system because this thing is cooling the 4790k during rdr2 gameplay at near silence
i would hope a 2 tower modern air cooler would handle 40w of heat
lol yea
i’ve just never focused a build on acoustics before and i’m surprised how quiet it is
i also have an aggressive fan curve on my main system lol
@pure garnet if i want trfc to work the same way that it has since am5 launch do i use "normal mode" in the new agesa?
well this was a news story i wasnt expecting to read todday after a bllizzard https://www.boston.com/news/local-news/2026/02/24/cocaine-levels-in-nantuckets-wastewater-are-growing-exponentially-no-one-is-sure-exactly-why
well then
yeah
unless msi pushed another bios you're stuck in normal mode anyway
the agesa pre 1.3 on my board has no toggle like asus added
the more puzzling thing, is its an island...
is that where you are? How bad did you get it up there
not exactaly where i am im a bit more north, i got 37 inches on top of the snow we allreadyd had, the piles are taller than my 58 inch self and were getting 2 more inches tonight
DAMN
getting 2 more inches tonight 

@edgy laurel local friend selling an X870E Extreme for $300... should I
the snow piles literally melded with my hyundai ellantra in the back, because of the drift
No
Fineeee
if you sell one 9800x3d that covers the board and leaves you a 9800x3d to put in it
yeah just no case or gpu or anything
I was thinking I could replace the X670E Hero with it
but I am using like 3 or 4 NVMe in that thing
I suspect the X870E Extreme has lame NVMe
What type of surgery
It's been a pretty mild winter over here. Not even a millimeter of snow. We did get like 30 minutes of hail though
Utah skipped winter
Pretty much what we did
Colorado skipped it as well
We are going to burn. It will be the fires of hell all summer.
My camping spots 🙁
Keep the fires to your side of the Rockies not ours
You’ll take fire and you’ll like it
Noo
Anyone need a 9800X3D
Beep beep I’ll live in my jeep
For freeeee?
Save it for later, put it in a potato chip bag.
explode the ocean
and explode any employee that complains about the schedule they literally made
explode New Jersey
seems like the best move right now?
- Raid 6 gonna use it for file backup /consolidation of the current 18 individual drives i have right now.
most intensive thing will be media server, quality depends on host device/ upload speed.
pairing with the router pictured. - ISP router only has 1gig ports. getting that router,
planning on NAS on 10gig port, ISP on first 2.5, then 2 left open for expansion, one 2.5 to my thunderbolt 4 dock for my 14 inch M4 Macbook 128GB I just ordered.
add storage as pricing allows.
calc shows 56TB on raid 6, i have 64TB data across those drives, hoping for some duplicates as i go through them.
any advise on tools to organize the media libraries?
oh i ordered 4 of those 28TB refirbs
significantly cheaper to build your own out of spare parts/cheap used parts
$1,500 diskless is wtf
Mac remember who you're talking to
who tf is that
Is $1500 even considered gaming computer money anymore
it is
a professional idiot never satisfied with what they have 
Fire
My pov is skewed
guys.
iPhone autocorrect is just doing its own thing nowadays
lol
not the news i was hoping for
i genuinely got away with my shitty soldering job
wtf did you solder on a cpu
i knocked off a SMD on it at some point
Did he solder steriods onto it?
which i assume was why it didn’t work last time i tested it
so i found it in the case it was in and shittily resoldered it on
works.
you see ts
oh...
it’s securely placed i just did it like a dumbass
i’m going to redo it now that i know the cpu works lmao that’s so awesome
He’s gonna push it 100mhz and its gonna explode again
damn it not again
Day 2 with "big" Mac Mini and I am not sure why I bought it
pretty sure not counting infllaated ram prices my pc is more than that?
cause why not
it's like the box of cables everyone has, just in case
Cheap ram pc
its $1,370. seemed inline for an 8 bay build no?
its got dual 10 gig nics, alder lake.
You bought it to scalp/ resell when apples ram contracts runs out
exactly
Do we reckon the iphone 18 series would take a hit in price or have some compromises compared to this gen?
Optiplex/Lenovo diy nas is so much cooler
you know better than this, crystal ball
Yeah you right
If Samsung's galaxy mobile department got refused ram from Samsung memory department idk what apple will do
or just get a Jonsbo N5, with standard atx parts
i saw this too, but though probably shouldn't support them
the 2nd one was cheaper, but rack mount, and ppl said it doesn't have enough useful feature.
thats all i saw from names i recgonized.
oh okay i wont bother updating to it then
samsung people ran into their own samsung issues
I'm so happy I'm not a data hoarder

I just need my movies
when I am in a “not satisfied” competition and KoolCordell is my opp
this was the last DIY NAS build from late last year "purchased" is the HDD's isolated (not avail at that price anymore 🙁 )
i just posted that build
I should set up like a 2tb nas for my parents family photos
Immich is neat
wym?
it mostly pictures, music, family videos. i think only 8TB is movies, and 4TB is TV shows.
that build list was literally from tech 2 💀
You have 150tb in raw hdds though....
Oh I love this
but yeah $2,800 for DIY seemed ... excessive...
Lenovo is the delorean of computers to me
that psu alone is worth $50, shame i can’t go get it tn
The cooler alone is almost $50
Wym "can't confirm"
Where memory lol
I gobbled it up
yeah, i have 18 drives to consolidate. and more importantly get if off of the M.2's so i can sell them for 15% over what i paid for them new ! (joking .... although 🤔)
i was gonna keep kicking it down the road and order another 2 4TB Samsung T7's or Lexar 790's in external enclosures .... but the price 😭
since prices will keep going up for at least through at least summer 2027 before stabilizing at the "new normal" then hover for 3+ years before supply starts to catch up ... i was like i kinda need to handle this NOW.
“worked when last used” yet no ram
sold for $20/ GB
i paid under $300 for each of my DIY portables to give you persprective ... in summer 2024
Yk these companies are gonna landfill this hardware when they are done with it too
i love being a data hoarder tbh
it also will cover backing up my phones, tablet, and M4 Max macbook. video foortage is large 🙁
Struggle.
My ripjwaws kit is now in the grand area (USD) 
sell sell sell!
I've seen too many data hoarders try to back up all of wikipedia which is insane to me
I'm going to eventually
It's in my Intel rig (the one I'm typing from)
Although I could get over two grand from the total of DDR4 kits I have

but why
Sell before 2027
its only like 50GB?
compressed, text only, it’s 24-28GB
Yeah its not that big tbh. But my worry is updating it
yea downloading all of wikipedia is on my to do list
if you add media, make that 24-28 petabytes
you just get a service to do it for you
well, yea
kidding, it’s only 540 terabytes for the media included, and full edit history version
https://youtu.be/HQ_3g2hUCn4?si=-sYOVF0nvkgsdnjB this skit makes fun of those peoplewhat if the Internet dies I still need X thing!
downloading the text only version isn’t that crazy
you’re never actually gonna make use of it, but whatever
I don't care about the internet dying. But uh.. Well.. Other than that I just think its neat lol
All the information literally at my fingertips
If only we had a physical version of Wikipedia in every school and city
uh, we don’t
Yeah I'm not sure how well that holds these days
idk, if we get to a point where offline wikipedia could be helpful, bigger fish to fry
Well we sorta do
library gets you some of the way, but far from the comprehensive history of almost everything that wikipedia has
Kiwix
finna hit them with the “japan is bla bla bla electricity”
We used to..... It was called Encarta (or at least it was as close as it got to it) 
I take it back the library won't have the ltt Linus hard R records
Do they have the linus drop tip records?
But yeah I thought a simple NAS was the way to go when 8GB is now $130 for some reason ... Keep the build "basic" . The Intel i5 1235u isn't amazing, but should be powerful enough.
I have the Onn 4k streaming box so I am sure that CPU can handle lossless to whatever that quad-core can handle without dropping frames.
With only 5-8mbps upload speed (sometimes 40, depends on its mood), I don't imagine there will be much accessing it remotely
I did make sure that you can run a third party OS on the ugreen. So if needed I can do that.
It's more about consolidating my literal drawer of hard drives
12 in that drawer, 2 TB4 enclosures, 2 t7's. 3 10gbps m.2 enclosures, and the 8TB from my Intel laptop, 1TB from my new MBP, 1TB from my phone, and whatever the tablet holds ... Oh and dropping back down to free Google drive from the 2TB plan 💀
can we get discord isnt a search engine here with the “why is there someone doing nas shit in my lga1954 leaks channel” 
Nah, inflated purchase cost and inflated auction income is all part of the new hardware every 5 years calculation.
I really want the big Nvidia shield, but settled for the Temu version 💀💀.
oh
hm
@edgy laurel what desk do you have
the OG Ikea Galant L-desk, no longer sold
had it for like 13-14 years
My roommate is shopping for a desk
And it's hard finding premium options that aren't $1400 standing desks
Galants are all over FBM
at least near me. usually for free to $100 or so
large, built like a tank and (now) cheap
just get a slab from uline lol
that’s what my family has always done
just get a flat door panel, put it on 2 sawhorses, and you already have a hole cut for cable management
what is this “cablay management” you speak of
its where you put all of your cables in a rat nest out of view and tell people you can unplug stuff anytime you want
thats true, you can even get a big ole stainless steel counter-height kitchen prep table
you straight up aren’t finding better value than this
and you have a built in foot rest
foot shelf is what id call that
put a bunch of pillows n blanket n shit on that shelf then my feet can get all cozy on the foot shelf
How’d I just now find out BeQuiet makes mice lol
but not too many blankets or pillows because then im gonna FREAK OUT from my feet not being free
but i spent like $150 on each NSF stainless steel prep table for my kitchen and it was a pretty good move for the kitchen at least cause it adds so much counter space and stainless steel table is so easy to keep clean
and i could beat the fuck out of food and not worry about the table strength
shit like this all over FBM. people mostly just want them gone since they take up so much room. less than $200 is common
didnt bring any tables in the move here though because i wanted to get all new stuffs to match my space properly
that is a fucking sick table if i had a pickup truck and a garage im getting that instantly
yeah i kinda love it too lol
wow that's nice
i want a garage just to put that table in it
if i ever have the money im gonna find the case that has the smallest width while still accommodating my gpu, so I can put my case behind my monitors lol
i like my desk, but thats a nice desk
pretty sure that's the dimensions of my current desk
alternatively, embed your case halfway into the wall and have it roll out when you need to perform maintenance
its less cool now that i know its a premade table
yeah 71x35 sounds right
if you have a truck/big suv, fbm is a goldmine for cheap tables/desks that aren't shit
I want a nice big butcher block desk in the future, that'll be mint
get a laundry-chute sized case and put your PC in the wall
i want a big butcher block table for my kitchen on wheels and i want to eat cheese and salami off of the butcher block table and olives
alright, back to giving A Knight of the Seven Kingdoms a go
and i want to demonstrate to everyone in a 4 block radius what tenderizing chicken means because these people ive seen them tenderize chicken they arent beating it to a pulp like youre supposed to, it should basically be shredded chicken that is held on by a thread of muscle fiber
so with that butcher block table i will pummel chicken into the fucking ground like im tamping soil for a driveway pour
never change, pepe. never change
i have not tenderized chicken at my apartment yet
i always feel bad (even in free-standing houses) when i tenderize meat loud as fuck on a shitty countertop cause it feels like a domestic disturbance
so i try to only do it on really solid surfaces
when do you tenderize chicken?
you mean like time of day or
my rule growing up was that i will not disturb my neighbors unless it is between 12:00 and 7PM
so i keep that rule i think its a good rule, most places are like 10 -> 8 or something for noise or construction
Someone lmk when the superstrike is back in stock
ill let you know mac
thank you
i wont let him know i dont want him to buy that mouse
Oh
oh youre still here
one of these days im gonna write something, guilty, i swears it
I’m becoming somewhat of a mouse junkie
I have 3 quite good gaming mice that I comfortably swap between
i dont like logitech receivers and i dont like their sensors because of the depth tracking being inarguably worse than steelseries
on account of it having no depth tracking
I don’t like Logitech either I just want to try the haptic stuff
Fully intend to return it
thats fair it does seem interesting to me
i feel like this is just the best marketing thing logitech has ever done
I guess I phrased it wrong, but for what types of meals and dishes do you tenderize it
I don’t trust Logitech as a company anymore after having $300 worth of mice from them break
BestBuy method!
usually when the chicken is breaded or when its in large pieces so like chicken francese, chicken parm, country fried steak stuff, chicken sammiches, etc
ok yeah makes sense
it doesnt ever really hurt to tenderize chicken so i would just say do it wherever you can unless itll mess up the recipe (stuffed chicken breast type stuff you wouldnt)
yuh
I just need Logitech to make a light gaming mouse that isn’t the superlight shape lmfao
The shape hasn’t changed in 6 years
usually I just make chicken breast by butterflying it and calling it a day
I prefered the shape of G703.. and proceeded to buy 3 of them after the first two broke
8 years if you include the g pro wireless
same guts as the original g pro but in a right handed shape
I think i've had my current superlight for maybe 2-3 years at this point? still no issues afaik
I don’t like asymmetrical mice
I had two break in 6 months back to back
I can send you mine and see what happens
I used mine for like 6 months and passed it to my aunt lmao
I quite like mine, but this is my first actual gaming mouse so i can't say too much
not enough experience with other things
i just found out that steelseries makes a modern mouse that isnt wired charging and uses batteries instead of micro-usb thats great i love that
i will swap back to steelseries once this mouse annoys me enough
idk if i could go back to battery powered mice
would only do it for like a work mouse or smth
I use a wired Dell OEM at work idgaf
I've got some logitech BT which is goated
i feel like i have parkinsons when i use the dell oem mice that ive seen
cant fucking click on anything
is that you michael j fox
I need like a docking station for my mice to keep em charged
these bad boys rock
that’s the one
they've got them at the engineering computer labs here
yeah that looks terrible
a glossy mouse seems like a bad idea
shit would look like ass if you don't clean it regularly
you try to click and the movement of your index finger on the clicker moves the mouse away from what you were clicking because the weight distribution is all fucked up
what about the incott g23
I got real sweaty hands, that would look like it was covered in fat after I used it
my hands get schweaty when I game so I wipe my mice religiously lol
never heard of it
represent, truly a terrible problem
hotswap switches
dear lord, the intro of episode 2
hmm
i cannot unsee this
I should watch, but I want to watch fallout season 2
I need to figure out my comfortable weight limit
I’ve been kinda spoiled by owning two sub 40g mice lol
my comfortable weight limit is 0.15kg
better off, unless you want this image seared into your memory
how big of a risk am i taking if i dont buy another 18tb right now 
we ball

Jesus
LA MONSTRA
i could imagine that being a good form factor for mr wendell, but he was an OG oled user
dude had like lg c8 or something
oh holy multi pc
@civic reef
https://www.facebook.com/share/v/1C7M4MCbg6/
Sodium and Potassium bullets
See posts, photos and more on Facebook.
he mentions 4x 1440p monitors in portrait, but even then this display has more horizontal resolution
If I was doing that setup, i wouldn't even use the hardware KVM functionality. More seamless with something like synergy or mouse without borders
mouse can just move between each input as if its all just one PC
this was hurting my brain cause of the orientation of everything
because it probly goes by your last performance
but then its like oh this guy hasnt played in a while lets put him up against brand new bot players so that he stays
skill-based matchmaking was only ever an algorithm to maximize user retention
i am getting shit on
the loading screen got you thinkin you was the shit but turns out you aint even the fart
There's a non-zero 50% risk that a given storage device could fail at any time for any reason. 🤷 How much risk that means for you depends entirely on the value of the data you're storing on said storage device...
Because you're just that good. I expect to see you in the champion squad.
Dell should send one to me as well... for testing and verification purposes.
Top tier pro-star Pubber. You the man Jerry, you are the man
@turbid locust what would you set karhu utilization to on a fresh w11 install with 16gb total
wdym
use kguix instead and just set it to 95%
it'll handle the value allocation instead of memorizing a dumb number
okay
its more or less expansion for me
there's some backups but mostly just linux ISOs
i can find a 18tb from china for about 200$
hc550 so its the same model that im currently running
the seagate currently in the array is the concerning one as it has quite some smart errors, but the other two is still good
either i put another parity in or expand the array by 18tb again
alright yall my interview is tomorrow
gl bro
should hopefully have this in th ebag
job description was basically my resume
didnt have a ticket system at work tho so that'll be neat
nvl launch will in fact be mine
CES 2027 they're saying
gonna make me buy ryzen so im not bored
so you have some form of lga 1700 yes?
i dont have extra DDR5, but since my KS works, i want to do something with it
yeah a few
@low sorrel I did the harvester, this fucking guy kept looting my crab legs. Whatever, didn't say anything didn't complain. He says "I have a hatch key guys" and so I follow him like 500M to the hatch. Just as we are there he turns around and starts shooting me. MF had me draw my Anvil IV and guy got SMOKED. What an asshole.
But most of all... if you're going to lure me away from everyone at least be good
We're set
what gun dead he have
what game is this
Do people actually play deadlock?
Like I've have it
But I've never seen anyone actually play it
@shell void @merry stirrup no balls https://www.reddit.com/r/CanadianHardwareSwap/comments/1rdxrd7/kamloopsbc_h_corsair_ws_3000_3000w_80_platinum/
so guess who doesn’t have 240v
im gonna hit you with the oldest trick in the book
how bout you buy it. no balls.
i need an lga 1700 board but that can be for another day
13900KS at least got hot and trained in the new b760m i bought so im pretty confident it turns on at least now
Top tier bait
Double it and give it to the next person
@brisk jolt
Bro loves this game
mmmmmmm…. kebab…..
guys is assetto corsa worth it
Yh
oh
yes
megabit downloading 😔
its a great starting game
Nico have you googled a thing in your life
What do you guys think about AI art?
looks generic. constant mistakes in it. stinks of no effort
complete waste of time, electricity and resources.
BTW, can anyone of you can find a button to delete Windows.old in Windows 11?
right click press delete lol
Its also available in Disk Cleanup as a "button"
if i'm understanding what you're asking
now you can't delete it
i can
uc
I have use 2 powershell command + delete then i can delete it
huh
latest canary channel version Windows 11
If you aren't comfortable googling and trying out all the rescourses online for managing Windows.old, you probably shouldn't be running a pre-release operating system
because u only can delete a very small amount of file by previous methods
I am comfortable. but this time it really mads me
Use Sysinternals PsExec and run as NT AUTHORITY\SYSTEM?
Previously, i just use shift + delete
this time, i used it then i found that it still have 27 gb files which is not deleted
use Disk Cleanup as previously suggested or just wipe and install a retail version of Windows.
what i really need is a 120v 2000W PSU
it did not show in disk cleanup
(i have a 120v 20a circuit in my bedroom)
u tried win safe mode?
maybe permission is bugged
I used the last method in this webpage
And i found that you cannot use RD as a fast way to delete files in powershell
try deleting it in Safe Mode (Win + R → msconfig → Boot → Safe boot → Minimal → OK → Reboot)
and then via disk cleanup and/or takeown
I have deleted it via my method

sudo rm -rf / --no-preserve-root
But still thank you for your help
yeah nah already broke to many linux systems with that (for fun)
I think ive done it once. Also for fun, but even then its been so long I'm not sure I actually did it
I just wanna share it
which distro?
because i just dealt it and i was a bit mad
i have arch with hyprland (and qs)
so have a tiny bit angry
Currently running CachyOS which my phone hates trying to use the correct capitalization for
tf
Or at least HeliBoard does. Futo was fine but i want proper foss
yeah my phone is running crDroid rootet with KernelSu Next but still the stock keyboard
idk
Stock is just a bit too basic for me
but switched from gp store to aurora store and fdroid
I choose not to use play services on my main profile. IDC how sandboxed it is, those can be on my other profiles
When you guys search orders in Amazon does it return a whole lot of shit unrelated?
Like- Your orders?
No.
like... what
I just searched "shoes" and it returned every shoe i've ever bought on amazon (which was a surprising amount.. wow)
None of those are "9800X3D"
Okay, I know that I was advised here to buy parts in one go instead of in increments, but I am pretty sure that I need to buy this 5600x as soon as it's back in stock or I'll be paying $200 for it by the time I have the $300 for everything 💔
(not my screenshots)
give
poop fan duplication
Forbidden frisbees
wouldn't that be by design if some sort or ASIO style communication is in use? As in there just a digital signal is being sent
similar to exclusive mode in Windows
yeah but apple also has a stranglehold on the audio production scene, if there is one thing i'm sure they've got figured out its the audio processing chain
they are so tuned up they won't let me change my volume lol
ideally you wouldn't want OS level volume control interfering at all and have that all done at the amplifier level
ok yeah
let me see
A license to control my volume, oh shit
@edgy laurel when you see it
Okay so I am very confused
There are 2 Ethernet ports in the walls of this new place, one on first floor, one on the second floor
The one on the first floor is a functional WAN connected to fibre ONT
The one on the second floor appears to be...dead?
i'll be honest i'm not seeing it lol
The landlord claims the second floor port was connected
was it wired to be A and not B?
Tell me how I can figure it out with this set of test equipment
whaaaaat surely you need 3000w
well if they wired it to be type A you will need to have another type A wire to run it to the switch or else it wont work
There is no switch
There is just a fibre box in the garage
In supposed to plug the lan port of the router into the wall and do what exactly
If all the cabling is home run to a single location, you just need to find the ends that correspond to each wall plug.
cutting it close on a 20a circuit
yeah toners would make this much easier
code would only be 1920w max continuous load
We've only located one WAN box
look at mobo nvme writing... look at pump cover writing
There's just a second mystery Ethernet port
yeah bc of 80%
80% of 2400w
120*20=2,400*.8=1,920
yup
well yeah the board is inverted in that orientation. maybe the AIO logo can be flipped?
So I ran the pump "rightside up" in that I ran it "upside down" -- matched to the board orientation. After a day, pump noise.
bro, being able to get that in the next day is crazy lmao, it takes me at least 3 days to get my stuff in
jeeze man, these "when you see it" things shouldn't need a backstory to figure out! 🤣
@arctic bronze my guess is the different Ethernet ports in the house are hooked up to these boxes independently
One for ziply, one for Comcast
just gotta use your noggin!
Idk why they have 2
upside down pump = noise, I would have thought it'd not matter
Any millennials in the chat
Do cable TV boxes have coax connection and Ethernet connection?
i didn't think it mattered
Me either - everyone talks about how this BQ pump is silent, mine was most definitely not after like 12-24 hours
at least not in an AIO
Coax
its prob fine in every orientation other than upside down
Is the other end of that cable terminated
There's a box that appears to have Ethernet with a security torx bit on it
My LTT screwdriver is at my old lease still
So the investigation is on hold
Ah i see
i’ve only had four AIOs, but none of them had perceptibly silent pumps when set to 100%
but setting them to manual 50% fixes the problem and has no impact on performance
this one is silent when not upside down
Iv had 2, the first was not quiet and the new one is pretty quiet
My guess is Ziply or Comcast, whomever came second, added their own Ethernet connection
Maybe
Imagine
Literally every AIO I’ve owned is audible at 70%
Is this how we find out Mike has hearing loss
my LF3 is audible at 40% nowadays 
I still don't think i can hear the pump in my now nearly 5 year old EK360
the fans in that case I can hear as I realized i lost control of them moving to linux
and I never looked into how to manage fans plugged into an NZXT smart device v2 in linux
so 9 nzxt 120's just doing their own thing
guilty why are you on Linux lmao
Only thing his Radeon card is good for
it does have a radeon card, yes
Funny, stopped hearing my pump when i moved to Linux

Welp today's the day lads. Just pulled up to the doctor's. Have my interpreter (for me, I explain my symptoms better in Arabic). This is going to be sucky, but needed

Okay I've had the keys to the new place for less than a week and I've already fallen down the stairs once
Goodbye my good knee
Feels
hope it goes well
i said that none of them are silent wym
i can still hear up to 20KHz and i stopped using my intel x550t nics because they have a whine
last time I did that I was out of work for 3 months after the surgery
i have my lf3 pump set to 40% and my case fans set to 20% which is around 700rpm
I can’t read sorry
Why you calling me out like that
(I do lol)
not my fault unc
My knee is still a little sore but I should be fine
I haven't fallen down the stairs at my current place
At the prior apartment I fell down once pretty hard while carrying an ipad
You know those Borg Cube super-expensive cases?
They're releasing an 8 drive NAS Version 😮
I love my wool socks, but they do lack traction
Incredible
They could fit a lot more than 8 drives in it though
probably could
I used to have a pair of wool socks, this is very true
that's sweet
New case candidate.. Thoughts?
Primarily interested in the fact it has side radiator compatibility
it's a case/10
seems fine
lemme pump 1KW+ through 6 wires
what could possibly go wrong
let me ignore the warnings too
124° C internal Jesus H. Christ
@shell void remind me why you didn’t like dbrand’s clear case?
the glossy clear plastic feels gross on my fingers
the lidar sensor+flash cutouts on the back also seem sloppy, and hairs sneak inside them
i’ve been running no case for a few days and i like it
the smooth rounded matte aluminum is more comfortable to hold than my 13 pro max was
I took my phone out of the case yesterday for the first time since I got it. I still don't know how people use these phones naked
just by design it felt so unsteady keeping a grip on it, as nice as it is to use with no bezel
something weighty, slippery, and expensive isn't the kinda thing I wanna be carrying around without protection
my phone was cooler when i had no case on it but i dont wanna obliterate my phone at work
it’s different now
i don’t like holding my 13pm bare so i understand
17pm feels very different
it feels less premium, but it’s a lot more comfortable to hold
it’s a lot more rounded and feels a lot less slippery
lmao he came here because he got bored of tc1
my 13pm feels like holding a sharp metal and glass rectangle in comparison
Ok thats interesting
no doubt
17 pro feels cheaper but it’s a lot more comfortable
it barely even feels like metal or glass
<@&750150305383186585>
"a trans" 
Nah akn's just a bud
🤙
<@&750150305383186585> I'd really suggest just bouncing this kid out of here. Been nothing but trouble.
if you’re not trolling then you’re a very sensitive person broseph
dude pulled out a 15 year old PC and asks 150 euros for it (originally 200 euros) 😄
My parents are dead and I own three houses & can afford to not work, soooooooo
(FX6100, 16GB DDR3, R9 380 Sapphire, 250GB SSD, 500GB HDD for context)
woosh
Thanks Momo or whomever
fucking FINALLY
thanks mods

I bet you barrington just woke up and hates all of us
wow is that dated lol
oh no theyre gone, anyway how are yall doing today
almost guaranteed
dude complimented you and then immediately called you an inhuman creature two seconds later just because of your identity
what a fragile snowflake
right? lmaooo
dude got pissed off because he was wrong about tech and then went on a spiral
had an exam, now just working on a project so not bad, what about you
.....
Of course I couldn't channel hop to avoid all that. Man.
anyways im going back to sl
have fun
@frank zealot tysm for the ping
I came back from the doctors to this
Dude went off the rails, holy shit
I was giggling lmao
an hour long video for one game o_o @steel stream @edgy laurel
oh as soon as me and guilty being a couple became an attack I knew it was gonna go funny
no spoilers? bro you’re about to watch the same 30s scene for an hour
holy shit lol, this mist be quite the game
Bro got the ban hammer. Almost a new record, close, but no cigar
best part, for 180 euros (so barely more than the previous one) you could have i5-6500+1060 3GB+Z170 + 16GB DDR4-3200 + 250GB SSD + 2TB . I mean still not great, but like 4-5 years newer in everything
yeah he’s only allowed to walk around the opening area for this early showcase
whos video is this?
wormz just uploaded it
you could sell me that case for 150 euros and id think it to be a deal
TLDR 4K pathtracing = 30-35fps on 5090, and dropping down to raytracing doubles your fps
dlss quality preset K with RT = 120fps
way better
is this with upscaling just curious
PT with dlss? or just base res, i would assume DLSS
4K DLAA with max settings and pathtracing
well, if you are in old cases, yes. https://www.ebay.com/itm/389366223007
i would never pay that much for a old case which was horrible even when it was new 😄
well if he’s using ray reconstruction then it’s actually Preset D
meltdown kid was trying to say that double stacking case fans is both fine to do, and beneficial for airflow.
(so like 2x120mm fans in a 50mm stack)
Anyone here ever use RenoDX before? I'm being told I should stop using AutoHDR or RTX HDR and use RenoDX.
I might try one anyway, my $15 Amazon clear case is starting to yellow and generally lose its hold. The corners of my phone pop out sometimes
im sold
if you like the clear glossy plastic cases then it’s a good one
i think they feel disgusting
I hate the thin rubber otter box uses on their cases
shit just eventually becomes literal oil
Really? I haven't owned an otterbox since the Galaxy S5, I don't remember it doing that then but it's been over decade so maybe something has changed.
but its not blue and doesnt have modified bodoni typeface logo on the front
Maybe my natural skin oils are acidic lmao
I've been using UAG for my Galaxy S22 Ultra but I'm sick of the Kevlar on the back. It collects too much dust and dust is my mortal enemy.
isnt the goal of sandwiching fans to increase static pressure? that’s pointless for case fans
Maybe, they might have also changed something, I only ever owned one from them.
I do know the rubber can definitely pick up oils, though
Make it feel oily I mean
from grease and what not
the grip on my G502 mouse is getting destroyed by my hand oils 😭
There is a bald spot on the top of my Roccat mouse 
For the left click
happened to my lightspeed
Anyone knows whats going on w my mouse? When i scroll its like twitchy. If i go up, it just goes down adn then up and back down. tried celaning wheel, doesnt help
after how long? I've only had my G502 for a few years now
Yeah that’s why I hate any form of rubber coating
my mouse has no grip i dont understand why people need mouse grip
i wipe my mouse with alcohol whenever i notice that it’s getting grimey
Pulsar supremacy anyway
I have come to the realization that I can't keep everything pristine. I have this weird dichotomy where I'm too lazy to clean my surroundings but I try to keep many of the things I own in pristine condition. I have made peace with the fact that life happens.
the sensor on the scroll wheel might be dying
i wipe my mouse with abrasive toilet paper to remove dead skin from it cause its a white mouse so i notice it easily
i didn’t know that purposefully abrasive toilet paper had a market
Microfiber cloth and iso generally takes care of my tech cleaning needs
when that happens with a mouse i usually just flip the mouse upside down and roll the scroll wheel on the desk back and forth a bunch
pepe wipes with sandpaper
you wouldnt use the soft side of a sponge to scour a pan
Thanks, lot better
Optimal
I got a keyboard with PBT keycaps because supposedly they last longer but I'm not fully convinced yet
Still twitchy but ig will be
They will all shine eventually no matter what
you can be comfortable or you can be clean, never both.
Your options are clean it, replace just the scroll wheel, or replace the mouse.
ok sometimes both
I do that a lot too but you have to be careful, rubbing alcohol is bad for a lot of plastics and what not. I use to think you should clean a display with rubbing alcohol and I'm very fucking thankful I learned you're not supposed to do that before ever getting a nice display. It will fuck up the screen finish, especially gloss. I just figured rubber alcohol goes good with electronics must be what I should use to wipe down a screen, nope. This is the one case you're supposed to use fucking water. I miss the days of using Windex on my CRTs.
Its pretty new mouse..
A lot of my cheap pbt keyvaps shined faster than abs funny enough, apparently the mixture makes it weaker
if the caps last a few extra years before getting shiny, I'll take it as a win
doesn't change anything, why would it?
ive never had a keycap go shiny on me which is interesting because ive used a lot of different kinds of keycaps
Maybe you switch often enough to not wear out a single set?
How do i even clean it? Try putting air in it? I dont even know how to change wheel either
I've definitely seen some really shiny older office keyboards (ABS)
I thought it would be good for long time..thats why
I can make ABS keycaps shiny in no time. PBT takes a little longer but i'm making progress on my current set
it has half a year on it
Anything can fail. You're aware of that, right?
i expect quarterly updates with photos of the wear on your keycaps similar to tim’s oled burn in videos
yeah mice should last for years, but doesn't mean it will
the doubleshot pbt keycaps on my rainy75 started shining in 2 months, gmk (abs) has been going like 8 months with barely perceptible shine
So quality may have an impact
Yeah, whats good and cheap mouse? Rn i use Attack shark R1
no idea other than G305
I just took apart my keyboard (caps and switches) to get all the dust and shit out of it and wipe down the keycaps. I just wiped them off with Lysol wipes ¯_(ツ)_/¯
define cheap
Cheap...less then 50
Clorox wipes is an interesting one
steelseries rival 3 (gen 2), logitech g305
Sorry I meant lysol
thanks, ill check em out. Didnt know mouses can go bad in half a year lol.
I do a deep clean at least one a year. All caps off, they get soaked in warm soapy water and individually scrubbed and left to dry. Then the keyboard itself gets full dusted and wiped down with alcohol around all the switches.
if you want wired these are alright, i use these as a backup mouse
yes, and to make it work the blades need to spin in opposite directions. Stacking two identical fans doesn't work at all
Additionally my stock gem80 keycaps have noticeable shine on the e, s, d keys after like 6 months-ish?
why you hitting esd keys so much
my least shined keycaps are somehow abs
I use wireless, hate wire, its making it hard to play FPS games
you an esdf > wasd person?
I mean iso isn’t rubbing alcohol. I’ve never had any issues wiping my mouse, keyboard, etc. but yeah you’re right never use it on a display. My displays get a damp coffee filter 
Yeah unfortunately I'm out of rubbing alcohol at the moment. So I basically just used lysol wipes for the keycaps because I really just needed to get the dust off of them and then used a playing card and canned air to get anything else off 
e is the most common letter and s/d are home row
this is a thing..?
is e the most common letter, someone grok that
@ grok put it in a bikini
is that what you wanted pepe
I think the pinky end of my hand doesn't permanently rest when typing and that might be why a doesn't have as much wear
eh, kinda is. "rubbing alcohol" is just going to be iso and some level of water concentration.
no ungrok that
idk what else grok can do, I think that is it's purpose
Yeah people use it because they can hit the other buttons more easily.
Inneresting.
google grok says E is the most common letter he wasnt fibbin that
esdf should be illegal
bro had to google it
this does seem like actually the perfect use case for an LLM trained on wikipedia and dictionaries and shit
honestly I can understand it
you have more keys around your fingers available
You right, you right. Everyone knows ijkl is better anyways.
hjkl users
what you guys know about 3wer
i dont know about it
missing out
i use wasd for player 1 and then i use ijkl for player 2 at the same time and play browser games against myself to keep myself humble because i always lose when i play against myself
What do you guys think about AI art?
no
word
Overused.
...okay?
shit, just like the last time you asked
🤙
I went offline after I didn't get a response so I don't really know who replied if anyone did
"what do you guys think about AI art"
is equivocal to
"Please yes-man me to justify me using AI tools to make money on art, taking away from actual artists"
the tools in photoshop are where i draw the line. you can use the "AI" tools in photoshop and ill be like okay thats fine cause that saves a lot of grunt work in editing
like background selection stuff thats all cool
I don't like ai image generators either I just was asking for thoughts and opinions 😭
I've used ai like, twice to generate a fucking profile icon for a website. that's it
"Make me a cat flying a plane in a cartoony style, 256x256p"
I've used AI to put my roommates in photos with certain people, that's about it
i see people in game development use it for placeholder icons for their UI elements which i think is an excellent use case
Yeah I think AI used in that way is the best, instead of just taking control and pumping out things it just assists the user with actions instead
Telling a prompt what you want something to look like, or worse providing someone elses creative work to use as a base, then calling the result "art" is absolutely abhortent and deserves to be shat on.
IMO.
its not wrong, if you nuke the enemy you win
Yeah I agree, I don't really know what's up with guys who call them AI artists honestly lol
@shell void I wonder if this turns into a larger issue https://linustechtips.com/topic/1632773-5090-laptop-24gb-only-shows-16gb/
Hello everyone, I just received my Omen Max 16 5090 24GB laptop, but it only has 16GB of RAM??? I contacted HP initially, and the representative took screenshots. How is this possible? VBIOS error, assembly line error, default...? I've searched everywhere for this type of error, but I haven't fou...
SKU adjustment without telling anyone? naa, couldn't be Nvidia
I think what makes art worth as much it does is the meaning behind it, who painted it, what's expression behind it, etc.
that would be a scandal for sure. its gotta be some sorta mistake
how do you accidentally not include a gddr7 chip
i send my sister random ai generated things from facebook messenger to annoy her
Nah, Jensen the Great just decided to come in the night to repo a bit of your VRAM, it's in the ToS. Did you not read it? 
i wonder if its like 4 4gbs or 8 2gbs or what the deal is with the gddr7
Yeah I dunno. being a laptop we can't easily look at the PCB
wait, didn't GN teardown a laptop with a mobile 5090
I know modern art is seen kinda weird but the artists of those art just went in this direction because of cameras, before cams art was about replicating reality, after it became an way to express a feeling, museums actually value stuff based on background and what's the meaning of a painting instead of the "decorative" aspect of the painting (how it looks basically)
Mentioned modern art cuz I think it provides an framework for how art will be valued in the future as well with AI image generators
Support GN and our local e-waste recycler and refurbisher at the same time! https://store.gamersnexus.net/
This video features an NVIDIA laptop with an RTX 5090 laptop GPU and Intel Ultra 9 275HX CPU, both of which are paired in the XMG Neo 16 that Just Josh brought with him to our studio when we helped with some testing insights this past week....
hey guilty:
lololol
too soon
This irks me.
that's actually me pulling out a cane for that image.
from 2001:
https://www.overclockers.com/fan-stacking-myth-vs-reality/
so they couldve slapped a 5080 16gb in physically and then gave it 5090 vbios and it works because magic or something
on to something
that's good
cause 5080 mobile is 16gb and gb203
They really just need to use different naming for mobile gpu's.
They'll never match desktop, and it shouldn't sound like they do.
yeah, though even that is so weird. Presumably these use different PCB's due to the VRAM configuration so I can't think of why there would be a mixup in the VBIOS flashing
5080 desktop is 203 as well iirc
but I guess stranger shit has happened
I'll get annoyed if same things were named differently like that lol
yah 203
but they're not the same.
A mobile 5080 can't even pretend to keep up with a desktop 5080
I'm not talking about processing power, I'm talking about the core architecture and intent of it
intent?
Cuz there's already over a dozen (two?) cards that use this same architecture, all with different names.
GB203 is in
Hold up
heyyyyy
There’s only one hdmi in 4090?
Depends on the model. I have 2
just use DP
too complicated, even though it's better
Hmm yh okay
goes off line to QA or pcb inspection or something -> QA sees 16gb and autopilots brings it back to the wrong line if the laptop manufacturer has multiple performance tiers of same product. and the layout might be different for vram BUT theyd maybe want to unify as much production as possible so maybe on the 5080 model theres cooling for vram chips that arent there and it just fits for the sake of making it easier to assemble
eh, depends
HDMI is for TVs, since it's an exceptional rarity for a TV to have DP
tldr past the PCB assembly the laptop assembly is probably all the same and maybe for flashing vbios and allat they rely on labels and someone fucked up their labels
tl;dr so you think someone screwed up and there isn't some deception happening
well im just trying to find a universe where someone did fuck up and i think its possible but 5090 reading 16gb and still working i feel like is kind of weird considering the vbios mods u have to do to get custom vram amounts to work normally
true
I'm following that thread, just curious to see what happens
i suspect he won't get a proper explanation, just a replacement
it wouldn’t surprise me to see nvidia make a 5090m 16GB sku because of 3GB G7 supply shortages, but surely manufacturers would have to clarify that
do i want to eat hotdogs today guilty tell me tell me guilty do i want to eat hotdogs today
replace with brats
hmmmm
dp
Ive been in bed for 4 hours reading manhwa
you been reading chin leveling?
nah omniscient reader
Why is there latency delay and missing icons on my oled monitor
But on my LG monitor it’s all there
windows being windows
bruh, its a bl 😭
no idea. hard to troubleshoot from just that sentence over the internet. i was never 100% confident you had set it up correctly in the first place
like, you had a lot of settings that would have been grayed out if you were truly in PC mode
Bro
My monitor is connected to dp, works great but both my monitor and oled is on
But there’s only the desktop screen and no icons on my oled
But my lg monitor it’s all working
because the other monitor probably became the primary
just change it back.., same place you arrange them
Okay
right click desktop > Display settings
have you tried just rebooting the pc?
like a full power cycle
is my work setup cursed
bro has the shaft setup
I think my boss is about to have an aneurysm
I’ve shouted too many Fallout New Vegas voicelines today I guess
what audio device is windows set to use
Chode workstation lmao
it looks worse there than it does in person trust
pics
Wasn’t me
I was doing this
I’ll probably go back to doing that :)
yess
get your snoozies
Still cursed
wtf is with the laptop stand covering a corner of the middle display
i hate it
I wanna cry now
ehhhhh
thanks guilty you made a grown woman cry
the laptop stand is ass, i just need a better one
tpu has no models listed
<@&750150305383186585>

gm peyton
hellaur
morning
The one thing I like about W11 is that I can manually adjust audio for each program that's outputting sound
macOS cannot even adjust volume at all
Wait what
Are we on the same page here?
I mean the 0-100% slider in the corner after you press the speaker icon
Right - that doesn't work in macOS if youu use a USB audio source that doesn't specifically have support
6090 48GB 2304GB/s
6080 24GB 1152GB/s
6070 18GB 864GB/s
Isn't that what the integrated audio driver is for
Providing basic control over audio no matter the specific device's drivers / software support
Speaking of, is NVIDIA really going to go back a gen and produce it?
but also sometimes you're not mastering dolby atmos movies and you just want to turn your music down
It is nice that on Windows you dont have to rely on the app youre using to have a built in audio slider
i don’t see the point in producing last gen gen cards personally
the same thing happens in Windows if you're using an ASIO driver
Does the 50 series use different vram than 40? Maybe theres more supply/production of the vram 40 series uses
the rtx 5050 has both gddr6 (desktop) and gddr7 (mobile) variants
calling it right now, someday we're gonna get VRAM-less designs using all new super high tech technology ethernet to connect to the internet to lease vram from geforce now
the 5050 needs fewer g6 chips than the 3060 would and it outperforms it
idk why nvidia would keep making 3060s
50 series gpus can use gddr6 so it wouldn’t make sense to produce ada lovelace again either
blackwell is more die space efficient especially on the lower end gpus
i don’t think we’ll see any older gpus revived but i’m just making an educated guess
probably got a really good deal on the fab end since they still use 8nm for switch 2
Hm
12GB of GDDR6 costs more than GA106 xd
$8.50-16.00 for a single 1GB GDDR6 chip recently
why does it say 8Gb? Is that the bandwidth for the chip?
Oh,2%,looks like just inflation
even if only half of the ~255 attempted GA106 cuts on a $5000 sammy wafer are adequate for a 3060 that’s still only $40/ea
and that’s assuming they pay the public $5000/wafer price and somehow only get 50% yield on a cut down sku with an old node
anyway the vram is more expensive than the gpu which is silly
Oh,ram yields that low
@merry stirrup i’m at your favorite store
hooters?
@pure garnet i don’t expect you to know the answer to this but i figured id ask. people online say best way to determine ddr3 frequency is just loosen primaries by 2 each and keep raising it until you crash. does that sound like a bad idea
ive never done it that way
i always just run mega loose timings to see what speed boots then tighten after
isn’t that the same thing
at speeds that low probably
8G(iga)b(it) capacity
fairly standard for ram ICs to be rated in bits, rather than bytes
they are commonly operated in parallel, so no one IC is responsible for a byte in memory
My RAM ICs run at 8533 M/Ts
I've thought about overclocking my ram but I just personally don't see a point to it. I don't feel like risking losing stability (and spending a bunch of time to test it) for a minimal performance increase. Maybe some day I'll get into it, I thought about it for awhile, but I'm just good for now. I'm fine with my 6600MT/s
This is stock
OH wait, really? I just hadn't seen a kit with such an odd number before
BEST BUY
Fucking Mac Mini, lmao Okay, now it makes more sense.
I need to decide whether I want to get a Mac Mini or a Macbook later. I need to mess around with Mac OS.
Yeah I might get both sometime, but I just mostly want to play around with some Mac OS stuff. I think I'm going to go with a Macbook just because it's self-contained, I don't have to use another display for it. Don't really feel like hooking it up to my TV, I can use my PC and the Macbook more easily that way with my current setup. I also like the idea of using it as a laptop for when I need one. Idk, we'll see. It will all depend on the prices and what I can find when I get a new job.
So right now it's one or the other
I've heard a lot of great shit about Mac Minis the past few years, though
Mine is just on a USB switch and cabled to my monitor via USB-C so its the same setup my PCs are on
Yeah I'm just not sure if I want to do that on my TV right now. We will see. I don't have a desk and monitor setup right now, unfortunately. Running everything off of my LG C3.
toastybros piss me off dude
4790k oc'ed to 4.4 using 110 watts thermal shutdowns on basically the intel stock cooler
who would have thought that
unmarketable tomatoes
I read that as "unrealistic terrorism" at first
