#tech-chat-2
1 messages · Page 363 of 1
For enthusiasts yeah, for XOCers it can mean the difference between having a leaderboard spot and not
the average overclocker uses the “get lucky strat”
for comp benches usually a company will bin for you
Oooo
but you gotta be somebody to have that happen
Does it cost a lot for that kind of service?
I think my next endeavor is gonna be to try to bin some 9950x’s
it’s more like asus or gigabyte “hires” somebody to hit a record with their board
Almost never but they’re put into a separate category
I wonder how many CPUs they are allowed to burn through before the company gets mad
Well the company can have virtually infinite CPUs lmao
Yah but it still costs them
Like you’re talking about Asus, Gigabyte, etc etc
wont fsr in general decrease quality a little bit
and by “bin” I mean I’ll probably try like 3
the pr and marketing for making the strix boards the “fastest” offsets it
I mean I know this ram stuff isnt towards ddr4 as much as 5, but I still think I got a pretty good deal, 32gb 3200 cl16 t force in white with rgb
For $60
the best image quality options in newer games are “FSR4 Native AA” for Radeon, and “DLAA” for Nvidia which both render the game at native resolution, but using their machine learning antialiasing methods
which produce better results than the native TAA option in UE5 and other engines
less smearing, greater detail resolving, etc
if you’re talking about FSR3, or even older versions then yes they’ll always be a quality loss
i meant vsr, i was looking to make the game look better
idk anything about AMD VSR or RSR
but now i can't get vsr to work either, i've enabled it in the amd software but it doesnt let me change the resolution beyond native in game
i assume they’re just glorified sharpening filters
I found jorj https://x.com/i/status/2018285506346590384
idk either i just wanna try 1440p and i dont have a 1080p monitor
and people are saying its good
oh is AMD VSR similar to Nvidia DSR?
yeah
it’s probably crap if there isn’t a newer machine learning version like DLDSR
probably idk i can't get it to work
havent tried that hard either but from the youtube videos i saw it just looked like you could enable it in amd software and change the resolution in game
that’s how it works with DLDSR, you just enable it in the nvidia app, and then you can set a higher resolution in games
idk why AMD VSR isn’t working for you
just watched a couple of videos, seems you just flip a switch but there is no obvious additional setting to pick a scaling factor
so, what do you get
also the people making videos of this are doing a terrible job
its very unclear how to do it
i asked chatgpt and it might be because im on a custom resolution but now i cant figure out how to change it back to native
with DSR, you enable it by selecting a scaling factor above your native resolution (Legacy, no DL)
there would be more below if you scroll down but this is google images, best i could get
then whichever resolution you select can then be set in Windows
and in games
yeah i remember enabling that before i got my amd card and it worked but now i can't figure it out
If it was me, I'd enable it then see what resolution options are available in Windows first
if any
Pls rate my pcpartpicker list https://de.pcpartpicker.com/list/nccCmL
Part List - AMD Ryzen 7 7800X3D, GeForce RTX 5070, Deepcool CG530 4F ATX Mid Tower
the one stick of ram is not optimal but i assume you plan to upgrade
there's nothing really wrong with your build but you probably don't need a fan controller unless you're really OCD about it
software can handle it
what resolution will you game at
1440p most games with maxed out settings but also 1080 low for compatitive games
get less CPU and more GPU
disagree personally
lots of new releases will stretch a 7800's legs with a 5070 at 1440
not all of them, but some
overclocking anything since like 10th gen Intel/5000 series AMD is by default 'unimpressed'. Which is good btw. I like that these CPUs are now sold pushed to reasonable maximums, so people can get the performance out of the box
lot of poor decisions resulting in not enough GPU budget. CPU and motherboard can certainly be cheaper
i agree on the motherboard being kinda nonsense
still think you guys don't actually play new games if you think a 7800x3d is overkill for 1440p
I only play new games with a 7800x3D
a 9700x can do the same job for less
i'm talking overall experience, not necessarily CPU bound benchmarks
i have like 300 hrs in-game in Arc Raiders
that’s like the best optimized ue5 release ever 😭
i thought we were arguing for a 7600x though, i’d support a 9700x
that seems reasonable
i’d take a 7600x/5070ti all day over a 7800x3d/5070
you guys are nuts
i mean i just own the hardware so
i’ve had a 265k/9800x3d/7800x3d at 1440p/4k and the difference between them is all… minimal at best in games
you're just getting so much more value with a 5070Ti over a 5070. considerably more
(ignoring the current pricing shitshow)
prioritize the GPU, always
he’s also like danish or something so that probably makes a difference
7800X3D is a bad decision in Danish or English
9700x w/ 105w mode and PBO, the unsung hero
I had a dream where I can somehow repair broken screens using only my finger
i have an aio pc that could use you right about now
How is this i7 8700k gonna pair with this 3080 i just got
I feel like its not enough cpu
depends
Its for my wife so like, Fortnite, rainbow 6 siege, cod, forza. Some stuff like ready or not
Ik most of those are pretty easy to run
What's the best sub $20 cooler? Maybe this? https://a.co/d/45738kS
For when you want to piss off the neighbors 3 doors down
And also shift your foundation
that, SE-214-XT, all the same thing
One less heatpipe but push/pull. Hrmmm
You mean turn it into rubble?
5.988 GHz*

Puxatawny Phil you asshole
wonder if i could get 50 bucks for 16gb of oem ddr4 on ebay
probably not
eh i got 130 for 32 a couple months ago so im gonna try lol
Dual tower
Although the fan config is mid
And it's got a coldplate
I think it's no surprise when you buy a thermalright, you're not going to get great fans like a Scythe, Noctua, etc.
Seems they took a page out of the scythe playbook, the front fan is a slim fan. Wonder if it spins opposite of the 20mm fan
That’s sick
I thought Intel stopped doing HEDT
Or was that just the lower end HEDT like the Extreme Edition
They paused anything new for a while
Probably because if it was based off 12-14gen it would have pulled half a kilowatt
If you just want the cheapest thing, it works
Otherwise if you were to replace the fan then you'd be better off buying the standard version
Suppose it could have niche use cases for dimension compatibility
It's mostly for my own knowledge, I have a fuma 2 still doing just fine. I like to know what to recommend to friends who are penny pinching
Tbh I'd say normal peerless assassin at like $32 is worth it
It should last a long time and handle future CPUs that may have higher TDP
@shell void @steel stream Puget systems says "the 265k is too reliable" (I am paraphrasing)
Interesting Xeon statistic
I suppose Intel actually cares when it's multi thousand dollar processors and customers who's time is money
makes sense to me
@merry stirrup https://videocardz.com/newz/nvidia-rtx-5070-ti-with-a-hole-in-the-pcb-manages-to-score-a-world-record
wtf
glorious arrow lake
Yeah think I’ve settled on what im getting
9600x and 5070ti 
should be a nice upgrade over my current 5600 and 4060ti
only issue is the ram
But that’s a future me issue
so turns out when you go to a college library people will talk about your framework laptop
i had like 4 people stand around me and talk to me about it
like i just wanna do my work in peace
just put an apple mac apple sticker on it
ive been doing a lot of ASP.NET stuff recently and I have to say, C# takes fucking forever for me to write anything but when I write stuff? hoowee does it work fine with no random weird shit going on
its almost like its like compiled or something
like the little gnomes in my computer are like checking the code before it runs you know like theyve taken all the code and then the gnomes are going through it before it runs to check it for me
magical stuff, folks. magical stuff
I mean it is cool I’d do the same lmao
But
I can see why you’re annoyed
i don't see the allure
I would not do it again ngl
my problem with framework is i actually dont want things to be that easy to take apart because ill either take it apart all the time to fix random problems that come from it being modular or it wont feel as sturdy
im sure its built well and all that but in my soul i cant believe that
^ the bezel snapped the like 3rd time i look it off
the metal chassis is cracking where the modular io ports are
because it's a weak point
if they just made a normal laptop and then sold parts for it that'd be perfect for me
the battery life is kinda ass cheeks icl
i dont want modular this modular that and i dont mind using a screwdriver to take stuff apart, as long as theres no adhesive to melt or o-rings to replace im fine with it being just "hey we have parts for this available at a reasonable price if you need to fix it, also here are OTHER parts that might work if you need a cheaper alternative"
The bezel is so satifiying to take off
but it's so fragile at the same time
in other words i dont want a modular laptop i want an open source laptop knowmsayn
like just fuckin tell me what this shit needs for its screen and ill find it on aliexpress
The modular io I have not moved it around once ever after around 1 year of ownership
side note: wtf did they do to my boy: https://www.reddit.com/r/framework/comments/1qtea81/my_solution_to_add_an_oculink_port_to_my_fw16/
im fine with it being an option thats ok more options is better but let me have a DC charger or somethin cause this usb-c shit just breaks randomly and i have to open the laptop up and desolder it and move another usb-c port onto where the charger one was
oh with modular io you can just swap out the usb c module and your chilling
and you know like im fine with soldering but im not fine with desoldering i hate it so much it takes me forever i dont have the proper tools to desolder these USB-C ports all the time
hows the modular IO connected again
when we moving to gdmi-c 😔
not gdmi, shoot what waa rhe name of it
obviously not in the bezel
is that USB-C to connect the modular io
it started with G and it was a input standard developed by china
usb-c isnt that bad i just want usb-c ports to be easier to replace
Yes
my thinkpads have 8 liters of solder connecting the usb-c ports its ridiculous shit man
Almost a year in the making, the world's only NVMe M2 SSD designed for audiophiles and music lovers. Designed from ground up, co-develop with controller manufacturer using 3D NAND flash with pseudo SLC mode, external clock oscillator, 200% more PCB copper isolation, milspec PCB stiffness, 300% gr...
i could break that so easily
@edgy laurel @topaz veldt
How
You can't even move the modular cards
There's a rail and shit
laptop on table, hdmi plugged into laptop, oops i fell on the hdmi and i have now put 160lbs of force onto the leverage wrench card
maybe the rails will save it idk
it would break the expansion card first
it's made of weaker metal
I use hit you over the head with the laptop
Finally!
The most important pc upgrade ever
What do you think, 1k usd for 1tb? 2k?
my problem is the idea is great but it seems like they shot themselves in the foot with the cooling solution in order to be compatible with the old chassis on newer cpus and also the firmware implementation of the cooling. When plugged in My Framework 13 overheats watching 1080p youtube videos, when not plugged it it cools fine. The performance when plugged in is just poor, if i want to do anything i have to remove it from power
I'd pay any price to hear nothing!
Wait, do your speakers not plug into your ssd?
What are you, a pleb?
Clearly that's how you optimal sound
why don't they just use wireless, the cross talk can't occur!
look how many people are over there willing to pay for it
There's more audiophile Kool aid than there was at Jonestown
oof
@topaz veldt do you actually sub on hwbot or anything
I loved C#
"what if java was good"
I have
how do people take this kinda of thing seriously
https://discord.com/channels/662303512948113439/1466854333495906622 participate in this with me? For fun?
https://community.hwbot.org/topic/245285-gskill-world-cup-online-qualifier-2026-1502-till-2203-2026/
DISCORD CHANNEL: https://discord.com/channels/662303512948113439/1466854333495906622GENERAL RULESIntel LGA1700/1851 Platforms & G.SKILL DDR5 memory (no 12th Gen allowed)RETAIL components (No ES hardware)HWBOT & G.SKILL reserve the right to reject any entryHWBOT & G.SKILL have the righ...
I can do that, if you're not overly serious about it. My time is sporadic.
But my ARL mem is kinda mid
Nah purely for fun/to learn
Last time I tried my gskill kit didnt like over 8800 on ARL so lol
you have the advantage of having multiple gskill kits lol
namely H24M
I could move arl to "The Shed"
What if Piet ended up becoming the standard?
The Shed 
Get some Arctic temps
brb hanging my AIO rad out the window
hwat
@steel stream read this guys story and you're almost inline with him. Just going to have to start hating the KEF's like he did before ponying up $1600 for a pair of the Genelec's. https://www.reddit.com/r/audiophile/comments/1qq6de1/im_done_for_real/
maybe i try this too
do you have a gskill kit?
my h24m
bang. Yep do it too
I'm so lazy that I only have g skill kits lol
Basically a language you'd have to learn to code... By drawing.
OH THATS DOPE
I'm starting to see the gskill way
@edgy laurel did you see Montgomery county came out with a new logo
omg i love it
Currently on my Asus arc but soon to be gskill
after the patriot kit i’m basically all in on gskill ram
Gskill is nice just wish for better heatisnks
I can't stomach ripping off the heatsinks
don't think so. it interesting or something?
I took the heatsinks off mine day 1
It's just like....classic logo to a fucking paint by number
currently running malwarebytes cause https://notepad-plus-plus.org/news/hijacked-incident-info-update/
literally $200 kit at the time immediately got soaked in ISO
8000c38 1.35v is a good enough bin for me
millenials have hit the county logo
So apparently I live in a shed, courthouse, or highrise and there's a river
I thought 189 was expensive at the time. Now i wish I bought multiple kits LMAO
My problem with it is that I just don't know how to really use it in a way that makes sense. I already wanted to learn C and Lua, which has me set to learn how to type stuff. Trying to draw code, even as an artist, would... Probably be confusing ngl.
I thought $459 was a lot
It's a pretty neat idea though... For something esoteric. Lol.
the childrens book version
lame ass shit
let's get montgomery county out of PA
@pure garnet @merry stirrup how is bro running 7400 on a 4 dimmer z690 board?
he needs it for video production
black magic
g4?
board limits wont care if its g2 or g4
right
All the good OC kits atm are pretty much from gskill afaik
C26 and 8KC38/40s that I see have all been gskill
I have a vcolor 8200c40 kit
it would be cool if i can get my hands on a vcolor kit
vcolor also sells 6000c26
@turbid locust https://www.youtube.com/watch?v=fYmRmLrWi7k
One of the greatest featured in the 9000 series X3D CPU lineup is that it is overclockable... so what happens when you try to overclock the 9850X3D?
○ Get your JayzTwoCents Merch Here! - https://www.jayztwocents.com
○ Join this channel to get access to perks:
https://www.youtube.com/channel/UCkWQ0gDrqOCarmUKmppD7GQ/join
○ Join the offici...
Oh god
dude is tryign to manual OC to 5.6 but running like... less than stock vid
just tried 5600 all core on 1.25v
and barely
yeah tbf most of his leaderboard strategy is “bench LN2 before everyone else”
but like.... 5.6 all core on 1.25v what
1.25v into a potato
that's it - that's his attempt
the salt in this channel is unreal btw
Discord or the hwbot post lol
they had to nuke the discord chat
i also want to know what black dot means by am5 being problematic but i’m scared to ask
the discord chat still has salt
@turbid locust whats the drama
ram prices too high, arrow lake too expensive
because it’s 6p only no ht of you want top 9 to compete irl you need to bin 285k for $600/cpu and then bin h24m/h16a
more l3 + higher clocks (presumably better cores)
tldr; people are saying it’s P2W with current prices and mad it’s Intel only
isn’t all competition p2w
yeah
even at $200 for a c26 kit that’s still not… cheap
top 9 has to be arrow idk if you saw that
Idk why people are up in arms over AM5 not being allowed
it’s only rpl for online
because everyone wants to turn in buildzoid timings to win free ram
yeah at the actual Taiwan meetup
I mean is that not doable on Intel anyway
Afaik you literally only need a sub in every category to be eligible
i don’t think he has nearly as optimized per ic timings easily available on intel
I mean just generic shit not necessarily BZ
oh yeah probably but
easier to do better comparatively
my 8000c34 setup started originally from bz timings and i’ve just tightened stuff to try and chase 1b
oh wait you can also just cheat memory benchmarks with x3d i forgot about that
i think gskill is the ones that said intel only but yeah probably
is that not just ocing?
12th gen outta the frame lol
it is
leeg said that comp has always been Intel only
but to do that you need to bin kits and cpus
i mean it’s not placing anyway so i don’t blame them
i just find it funny but lol
the most turd rpl is still probably beating the best alder imc
One gskill kit and a dream 
Literally going to participate solely to get better at Intel mem oc and fun
yeah i’ll just sub what i can
I’ve got a 14900K and 265KF, both on good Mem OC boards so we ball
I believe in our goat floppa winning it all
What was LGA1200 like for mem oc
standard DDR4 stuff
Hynix DJR was probably more common on LGA1200 than S8B
Consistently did higher freq than S8B with only marginally worse timings
yall have fun 
Setsuna do you have LGA1700 stuff?
unfortunately no
you have z890…
i thought you had a z890-e
wrong person ig
i thought about this and it’s probably because you can bin 12900k chips that have avx512 and pickup performance by default
im the guy that clicks start and gets 4 errors on the mpower 9950x3d
😭
7800 btw
setsunabin
updated bios, mem try it profile thats the most conservative, 1.3vsoc, other thing being 1.85
only diff is that it can boot into windows properly now
fclk 2k only
well slamming 2:1 with soc is probably doing negative help
i brought my itx to sch today bcs im done with a program being slow as shit
me when the
timings of despair but good the terms got figured out
yeah havent touched timings cause im not dailying this kit
we're gonna swap to greenies sometime this week and try to see if they behave. Thats the kit I want to daily.
isnt ur ARL DOA...
boy getting filtered by trefi btw
setsuna bin
mobo was and I got a immediate replacement
consequences of a ITX hotbox
wish dot com gene is crazy
I have a reasonable suspicion the mpower is just as capable if not more capable than the gene for mem OC I just haven’t proven it yet

wait Michael I didn’t know the thing you showed from BZ was a new video lmao
i would assume it's similar
yeah i was surprised to see a new z690 upload
very strange pc with a 13900k, a msi z690 4dimmer ive never heard of, fugly patriot dimms that dont work at xmp, a rx 5700xt, and a ketchup and mustard power supply
so optimal
he has a top intake fan with only one screw installed
fuck man
can confirm that i wish i had just just bought the neumann kh120ii's that i wanted instead of kef poorcoping
but these work so theyve stayed
from what i understand the shortcomings of the mpower are the vrms and msi just not caring as much as asus does about xoc
give me till the summer
or I guess I could still return the kefs
what you need to Kii Three's
like i pulled up last years intel rumble thread and asus was dropping special apex bioses, gigabyte had special tachyon bioses, and asrock/msi had, nothing
tbh i am liking this more compared to my old klipschs
the real solution is buying a subwoofer for your studio monitors
the kefs will have to become kitchen speakers
fuck me is the M5 good
i enjoy the wide dispersion from the coaxial driver setup
panther lake my beloved
even though it also causes a nasty desk reflection but i can eq that out
bass response is nicer on these, and I am enjoying the high frequencies more
RAHHH best x86 apu in the world built with INTEL FOUNDRY SERVICE 18A PROCESS TECHNOLOGY
MY SOLDIERS SCREAM
I think that’s what the modded bios is meant for tbh. I talked to Rage earlier and he said he wasn’t 100% sure about the CBS menu but he said there’s something in there that helps ycruncher he thinks
#1468050870427193498 pls 😔😔
does the 9850X3D have a godbinned I/O die or something
No
so you're just goated with the sauce ig
I just happened to finally get a not shit AM5 chip
sup yall, my friend has recently been experiencing motherboard usb ports not working and also permanent audio crackling which gets worse when he moves his mouse around, im pretty sure his CMOS battery died on him since he was getting the ''dead cmos startup screen'' however we updated his bios and that seemed to fix that part, do you guys think a new CMOS battery can resolve the other issues like the audio crackling and motherboard usb ports not working? or is his motherboard cooked?
I hope you find the help you need, Perk30Hoes.
The answer is no.
Audio cracking as you put it is typical of on board sound, if that is just poor implementation or interference from the motherboard, either way it’s typical. The ports not working is a whole different story. Depends on what ports, how they’ve been treated etc. that’s one for #1027757333117415424 if you want to.
the audio and usb ports came up at the same time as he was getting the dead cmos screen on startup
It sounds like there’s probably been a power issue but I don’t really want to look into that atm tbh
hes using a soundcard, ive updated all his drivers for him etc but dont know another workaround really
allgood, was just hoping a new CMOS would do the trick but if that doesnt work imma just tell him to build a new pc (hes running an i7 8700 with a 1070)
thanks king

i mean i’ve seen good results up to 7600 it just depends on the board
no selling was mentioned
@pure garnet my rock auto parts are here
the floppa psu
i wonder why
like the io plate ig is identical id expect they would’ve changed it a lil but ig not
same font and everything
this is probably the fattest C13 i’ve seen in the world Damn
one minor spelling error and its so over
wait send a pic i never used it
industrial
it’s like a good 30% thicker than any of my cables bro
how did my pro tier bubble wrap hold up
Interference - you have to remember audio is an analogue signal which is much more susceptible to interference than digital signals. Think what a screen would look like if you had a thick layer of fog in between your eyes and the screen.
Your best bet would be to get a separate dac/amp (a dongle would normally do great as long as it's not ground looping)
yeah i reused the box bc it fit and i didnt have the usps ones yet
may be a stupid decision but i wonder if i can use my 1300G2’s cables lol
i will not be trying i’ll be smart
thanks ill let him know! any thoughts on the USB ports that stopped working?
realistically assuming the physical plugs are the same, and you can find pinout diagrams, absolutely no reason why you couldn't
may just need some PSU side re-pinning
just have to not be an idiot
is it just a single port or two ports not working?
they’re the same psu
so realistically yes i can. like, literally the same
If it's 1 port, the port died. If it's 2 ports, a usb controller died
i think he told me 5 out of 7 stopped working
superflower is the odm for that evga unit so they’re probably compatible but it came with so many cables he gotta just use those
Oh no.
.... well thats less fun
xd
well lol it’s not identical but similar
Is he using SATA or nvme drives?
the unit i sent him is just the superflower branded version of a evga p2 1200w
I for one love the giant bag of cables i'll never use taking up half a drawer
pretty sure hes using a 250gb nvme with a 2tb hdd
SuperFlower my beloved
That should be fine, what motherboard?
floppa do you own gskill ddr5
msi B360M-PRO-VDH
if so you should do that bench thing with me and mac
heah it’s my daily lol
i couldn’t remember but
I think I have the exact same model but the 1000W variant. Leadex Platinum SE?
Get him to go to device manager and show what USB controllers show up
yes
i already tried every workaround in windows itself tbh, from device manager to drivers, to minimum cpu power etc
i bought the psu on a whim from a bapcs deal
then i replaced it just bc i was paranoid from the tomahawk
he has a soundcard but the crackling is also there on his motherboard sound jacks
and as the issues only started at the same time the cmos died i think it might just be that but someone told me it cant be so im not sure anymore
they show up they just dont work ://
"Updated Leadex Platinum GT"
or well he can move his mouse but then it just starts freezing for a couple sec
Oh. Reset BIOS if he accidentally disabled USB controllers
Oh... No that's not good
he now has all his usb devices in the front panel connectors
which seems to work but surely indicates something is wrong lol
What mouse
And what polling rate
im not sure honestly id have to ask him tomorrow, but i doubt the mouse is the problem since it worked fine for years
What I'd say is unplug all USB devices, and use a thumb drive or smth and check each 1 by 1
If groups are getting disabled, my guess is there's a short.
im just hoping a new CMOS will do the trick
Oftentimes it'll be like all or most rear panel USB ports are on the same E-fuse, and the front USB ports are on another E-fuse
cause if not idk if getting a new motherboard will be worth it with an i7 8700 and a gtx 1070
You can get LGA1151v2 boards for 50 used
true but idk if troubleshooting his current setup is worth it
altho the motherboard itself is probably faulty at this point
If he's running an 8700 and 1070, I'm not sure if he's got the money to upgrade.
it's still alright for 1080p games and more than enough for day to day tasks
i told him already i can probably build him a decent pc on am4 for like 800-1000$ but he doesnt have the funds for it right now
we mostly play league of legends together which is doing fine on his pc, but recently we tried running ''no rest for the wicked'' and his frames are kinda dying
Yeah figured
and as of rn, building a PC is not itt
real talk
if all else fails I think just get a cheap used motherboard first
i thought about upgrading my 5600x, 3060 12gb and 32gb ddr4 but
Try to hold it over until he can get a big upgrade
it is done
at this point i dont know if i can justify that upgrade with current prices
yeah will try do that if the new cmos wont work, maybe it could be that he had a power shortage overnight which fried some things(happened to me before as well)
hes got a prebuilt pc im not sure what kinda PSU is in there xd
psu perma 10% load is meta
I run an EVGA GM650 and I know my wall power is not it, never really had an issue even with brownouts
my build before this experienced power issues which fried the motherboard
and the psu
only had a bronze cooler master 650 in it tho
Oh that's not good
Iirc the only CM power supply really worth considering is the MWE Gold
but that was a year or two ago when I last checked
hey the gpu turns on sometimes
0 issues so far
bro on steal a brainrot
that’s what i’m saying
im gonn put my ocf in the y40 for pc pics during the gskillcomp
i now have an additional 3 pounds of copper that will sit around my room and do nothing
bro my brother and his friend found this like super autistic dragon game and it kinda fire
LMAO
like why this shit got graphics
yooo okay
my 17 pro arrives tmrw
like da phone?
yeah
bro how to train your dragon whattt
yeah deadass
they had an actual game when I was like 10 and I played the shit out of it, that's dope
yeah my brother was just talking about that actual game
no way this is roblox
okay i put floppa serve backup

interesting how 2/3 of my daily computers are all leadex based
very calm very demure
(i just had to take pliers to my 1300 g2 lol)
Yooooooooo I did it first try. Sure it's not an FC, but I made it first try blind (having not seen the chart and hearing of the song before hand)

Ending I thought I would fail but I pulled thorugh

if you touch amd cbs it kinda breaks the board iirc
I have a problem
Os gone bad
I boot from another drive with good os
Try to access files to move them so I can reinstall os
Pictures and desktop folder not there
The os had password could that be the cause ?
fire? lol
this is going to be pain
I just put a new amd CPU in and now my PC isn't posting. No power anywhere
All parts are confirmed working I don't know what to do
Tried with 1 stick of ram, unplugged everything and plugged back in. Everything is plugged in properly
And ryzen 5 8400f
Mobo is compatible
It turned on with the new CPU in it once before I shut it off because I thought I seated it wrong (this is my first time)
I didn't seat it wrong but I reseated it and it is very thoroughly connected
help 😭
#1027757333117415424 but what CPU did you have before?
Ryzen 7 7700
uh lol
What’s the board
i love persistent bios settings
assuming this was 600 series board? Was it running a Ryzen 8000 compatible BIOS?
@merry stirrup @pure garnet I thought my green kit had an unlocked pmic... I dont think it does
use the msi pmic unlock
am I restarted
off to #1027757333117415424
Do you know where it is
i dont own an msi board with the new uefi
you didnt even clean your finger grease off of it
gross
like loOK AT IT
its paste
grOSS
Ram a1 ?
z890 unify in your future
Kyoko do you know where pmic unlock is
yeah if you get me it for my birthday
nope
ltt go fund me type shi
to mac
i’ve never had a locked pmic
my greenies were locked but the pmic unlock thing works just fine
get 10k g2 working in my 265k/ocf/kit and it’s yours
ambient
no no no you didnt say that at first nuhuh
aight send it over
nah u coming over fr
okaaay
depends on the board read your manual and dont listen to people online telling you its only 1 or the other
I gotta bigger issues than my ram placement 💔
Left of the mobo
lmao
hell if I know 💔
i think youre more clueless than the guy asking questions
has elian not blocked you yet
Picture so pixelated thought it was ram
idk
he blocked like half the channel, guilty included
Try zooming out
on the left side of the cpu next to the usb ports
are you the 8400F no work in board guy
bios flashback to the latest version
if not assume the cpu is dead because the board is confirmed good
I traded my r7 7700 for the r5 8400f + $3k rims
CPU was recorded working just before picking it up
It was in the guys personal rig
fuck it. 1.43v VDD
😂
ts is fire
Hella rare
put them bitches on a clapped civic
i think ethan would implode seeing those tires
update the bios on your board, do you have a USB stick and some form of functional device?
yes and no
you have nothing you can plug and format a usb stick to and put a file on
No functional device, flashing bios would make it stop having no power at all?
time to hit up the public library
see there we go
did your dog chew the tires
i wanna know what car those wheels are going on
okay so
I FUCKING LOVE TARKOV
idk if I'll put them on my g35x
its b650 yes
its a required feature
or my 2012 jeep srt8
i was doing the pistol quest and i tapped someone in the head the nano second before i died
https://www.asrock.com/support/QA/FlashbackSOP.pdf @flint citrus
Or sell them for 3k
literally perfect candidate
18inch rims on my 35x but I want it on bags idk
https://www.asrock.com/MB/AMD/B650M-C/index.us.asp#BIOS
this is the page for your board, download the latest bios and follow the instructions i just linked you
if the flashing process doesnt work try formatting the USB drive to exFAT instead of FAT32
this build is so optimal
The srt8 is all black so it'd be perfect
45 miles of camber go for it
Cool
I remember my board said it needs a specific file format or rename the file
i linked asrocks own instructions
😭
Will flashing the bios make it have power
it probably doesnt detect a cpu idk bro
Yeah but it shouldn't need a CPU for the mobo to post??
you're probably going to have to swap the old cpu in
You can flash bios without post
flashback is specifically made to work without ram or cpu
I don't have the old cpu
Hence the button
floppa right tho
Bios flashbk button
You flash bios directly on board without needing to post
USB stick goes here
I’ve done it for my b650 when I had it
Microsoft support told me I’m not the only one with this issue
Issue is: windows not activating even though it’s linked to my account
Same hardware different storage drive activated won’t activate on the other same account
Solution: wait six months till we work on it
Do I need my CPU in when I flash bios
Don't wanna have to unscrew everything if it doesn't work 😭
Nein
no
its all optional besides the board itself and the 24 pin in
why is the cpu not in the socket anyway
Which USB port
read your manual
Shaky camera syndrome
Manual?..
is that tar
vape juice
he linked it for you above
You are a blessing
That’s human skin shedding on micro particles levels accumulating over thirty years causing a united front of allergy causing army
i have my ulterior motives
It's flashing twin
Rolling up rn so stressed swear to
but like 3 minutes and its probably working
Haven't even been home all day
Sad
@reef drift
state your business
account joined server today
i'm only talking in this channel so you find me through here "i suppose"
we never spoke
sus scam account
<@&750150305383186585>
I don't see any messages from that account in the Discord Guild. If an account posts something that violates the rules, alert us to the situation using the @mod tag in the channel where the #rules or Discord Terms of Service / Community Guidelines violation is happening. If reportable behavior occurs outside of this Discord Guild, like a DM that violates Discord's Terms of Service or Community Guidelines, I recommend reporting it directly to Discord so they can investigate the account. https://discord.com/safety/360044103651-reporting-abusive-behavior-to-discord
what the heck is going on
hunnit blocked messages
same
roger, i thought to report it to mods because they're using this server to reach users,
this behavior is very common.
new account, joins big server, adds users and attempts to scam them
twin if you cant figure out the answer to this one
mb I'm slow
yes you can turn it on if its done flashing
USB out
sometimes you may have to flip the psu on and off
Will it power on now .
idk will it
maybe you did it wrong?>
@merry stirrup @topaz veldt @pure garnet @steel stream @edgy laurel my motherfucking cousin went dumpster diving and pulled this much ddr5 sodimm memory
How
does your mobo ask to rename file / did you do that
holy
Yes
448gb in total apparently
fire
can u post picture to confirm
No
This guy won't give me a stick smh
Pssst. Hey, kid -- opens trenchcoat -- wanna buy some RAM baggies?

I followed that to a tee
anything cooler?
i see an ssd
i’d dock the pay of whoever was responsible for throwing this much valuable stuff out bruh
is it an audiophile ssd
no way its more economical to throw that much ram out if theyre still working
Should I go to where he dumpster dived to see if there's more ram
i mean obviously whoever’s in charge of deciding which products to toss there is wholly incompetent
i dont see why not
might find a gpu or smt
You underestimate how annoying it is to sell like 12 DIMMs
btw they're prob all failed lol
yea probably
A lot of companies are not going to deal with ebay/etc.
and surely not going to pay staff to test them and pack them and label them and mail them
He tested like a dozen and they all worked
i mean if they really wanted to get rid of it they could just set the price like 10% higher than the distributor pricing they bought it at
people would eat that shit up
especially the “pc flippers”
booting vs a mem test is diff
im not surprised
it's joever
all good i just got on the opposite direction
#1 transport system in the world
i need a new wireless mouse to bring out
the usb on mine literally split in half
tf
i got my g503 for free from a friend
wlmouse beast x mini
who wants to buy this for the vine
im considering either this or the huan
damn that looks awesome
i have the max rn
that dongle is sick
much cooler than mine
anyone knows name of this tool
nuked OS forgot name of temp monitor tool
Free Hardware Analysis, Monitoring and Reporting. In-depth Hardware Information, Real-Time System Monitoring, Reporting & more
could it be this ?
ye it is
anyone knows what usb4 virutal power coordination device is
i can't find what it relates to
i installed this it didnt update it
I have the white version of this
please keep updating the bios dangerous times
I haven’t updated mine for a while
im telling you the x870 made by asus just this month
Mines a little over a year old
The only historically significant issue with 800 series boards and Ryzen 9000 is with Asrock
And 7000 was with ASUS and that got sorted within 6 months
For better or worse nowadays it’s all a dice roll
They even say bent pin on that post
How do we not know if that was the problem in the first place?
because that came after he had problems and had to take it apart
according to him
How do we know it wasn’t there on initial install is my point
Mines installed with a Thermalright hold down
I am from the era of leaving well enough alone
Likelihood is that it was
I agree
And he only noticed taking it off
good point we don't know but we don't know it's not
but i've seen multiple reports around this matter
https://www.reddit.com/r/Amd/comments/1qklc5j/asus_issues_statement_as_ryzen_7_9800x3d_failure/
We would need to know what pin it was
If it’s grnd then we can say ASUS board or overclocking setting did it. If not probably user error on installation
Not beyond the realms of possibility the latest iteration of vcache issues are coming out though.
The manufacturing complexity makes it more likely for them to die
Check Physical Installation: Ensure the CPU is properly seated and the cooler is not providing uneven or excessive mounting pressure, which has been linked to issues with the 9000-series
question: i have peerless assassin 120, could it cause uneven pressure and should i get this https://a.co/d/0exNM4v2
no
Makes no difference
the reason i didn't go with it is because i'm really scared to touch anything near the cpu with those ultra delicate pins
In theory reseating an ILM / contact plate can increase pressure inconsistency
i hope sadly i'm so paranoid idk what to do or who to believe
some say it matters some say it don't and there's a risk both ways
ok
I did a contact plate on my 7800x3d just for looks tbh. It’s simple and unless you’re clumsy af you can’t mess it up. Just don’t over tighten
its also nice to prevent paste from going into those crevices
but you did it for looks not for mitigating possible future problems at all?
Yeah I did just slap paste on tbh. Didn’t have a care in the world knowing it won’t over spill
Was only £5 and thought why not
my fear is moving that cpu those pins scare the hell out of me i miss am4
when should i expect quantumcomputers to hit the market
would we still run widows on it?
I have one of those
This is why I did it
looks clean
You put the cpu in, put the plate over. Screw. Can’t mess it up unless you’re really clumsy
its clean
Q: why won't board maker just install those to begin with?
You need the cpu
Computers are a tool and tbh I just don’t expect 10 years
Cause people will still mess it up
huh?
It’s why Soldered CPUs is better for most people
what's there to mess up involving ppl
You need to screw it down
Boards don’t come with CPus
i meant the anti bend bracket thing if it came preinstalled
oooh it goes on top of cpu
ye very delicate
Not recommended for new people
no room for error with am5
ye im scared i shelled out a lot of money "for me" for this build
Being scared doesn’t change anything though
good point
Except being theif of joy
AM5 isn't new, unique, more delicate or worrisome than anything else as the socket is concerend. Letting FUD from randoms you read on the internet get to you
fear could be used to safeguard but shouldn't be allowed to let you go into paranoia
paranoia will cause you to do more harm than good
it is what it is

If you are afraid of it
Get cheaper computers
they have an extreme lack of testicles
the most reliable higher end consumer desktop cpu
Or a prebuilt with extended warranty
thing is, this wasn't a thing to my knowledge, i thought you just plop cpu cooler build done gg
now i'm hearing about anti bend and such
ree
going on 4 years old and 2 generations of CPU's. the socket experience is identical to what Intel had been doing for many, many years prior
Stay off Reddit
Reddit is vocal minority
anti-bend?? not a thing for AM5
hmmm it appears as many with multiple input lol
They sell millions of CPUs
true
Some are gonna die
It’s like Tech YouTubers with Clickbait titles
ye just paranoia
that's what got me so paranoid to start with
People concerned with CPUs but not Microslop Stealing there data
Is Crazy work
nah that's a concern of mine as well
real, after you can graduate and become a plumber
But I also don’t think Linux works for everyone
i tried that life in 2016 it didn't work i was too noob to figure it out and i struggled with drivers and many other things
my friend told me it's easier now i might give it a go in 2026
Windows is best choice for most people who don’t want to think about it
Windows the trade is data for easy to use
ok that's good to hear
icl sometimes using windows is just infuriating
i want to think about it but it's hard to think about it when you can't think and you're a mess
also not many easy to access resources for linux
atleast when i gave it a go
gang
i have an asus board i don't feel alone in this
if i'm going down someone else is going down jk

@topaz veldt https://videocardz.com/newz/occt-adds-built-in-intel-cpu-tuning-starting-with-xeon-600-granite-rapids

good to hear
you have a board that the vast majority have given Asus's market share compared to its 3 main rivals
i did hear there's a premium tax on them but a lot of people tell me they bad so i'm scared
but i heard this specific board i have is good
multiple layers and good vrms
i wonder if intel xtu development is ending
also i just noticed your pfp @timber geyser nice meme
if someones only line is "asus (motherboards) are bad", they're a clueless beginner
why is that "damn" worthy? Do you guys even know the difference?
from history, i learned overkill overbuild overengineer is the only way
in general not specifics
I'm aware, my board is 24+2+1 running a 90W chip. Hilariously unnecessary.
X670E
Why
Well if you bought a Gene, thats its whole purpose. And 90% of the time thats all this channel talks about
solution is to wait
Thanks. I needed this information
how long do you think itll go on for
until ddr6 ig
As long as the circle jerk of string is
i got lucky buying my ddr5 in september
the cycle continues
market will get flooded once datacenters start selling out ddr5 due to poor profits
you know, they’re also paying those raised prices
u need a godbin to even get 6600 gear 1
i suggest you wait a couple months
@timber geyser get the cheapest hynix kit if you’re looking for performance



