#tech-chat-2
1 messages · Page 54 of 1
'ello
I’m so excited for SILKSONG

Never seen it.
Hollow knight bruh
Nope
Thats a thermopad right? it was on the old ssd in my laptop. Should I remove it and place it under the new ssd?
Heya people, what's the verdict on going from i5 9th gen to i5 14th gen while still using Arc A750.
I plan on getting B7XX when it drops, if its any good that is.
Yes, and probably yes
first of all, 9th gen intel does not officially support ReBar, a very very very necessary feature for all arc gpus, so you would have performance uplift for graphics on that front
secondly, why 14th gen intel? unless we are talking about a very good deal, i wouldnt buy into a dead-end platform with known issues
wouldnt expect B7XX to ever drop
considerable upgrade, though i don't know if LGA1700 which has already been replaced once is a smart upgrade path
Sorry yeah I mean't that new Ultra whatever naming scheme.
I didn't know 9th gen was capping my arc pref? Glad to know.
As for B7 dropping, well I'm not dead set on it, I'm just in a position where I'd gladly support another competitor but if they're not any good I'd easily go for a Radeon.
Oh and yeah I think I'm getting a deal on the Intel CPU which is why I'm going for it, my other option would probably be around Ryzen 5 5500
that must be an insane deal to make up the difference between ultra 5 (the new i5 you meant) and a r5 5500
yeah, you'd have a very good uplift in both cpu and gpu performance
If I pushed it I could probably get a Ryzen 7 5700?
Actually I could easily get the Ryzen 7 5700, so my options are that or the Ultra 5 225F
what about 7000 series ryzen?
i would save up a little more and look out for U7 265K & U7 265KF sales on black friday if you want a newer intel CPU
we’ve seen as low as $225 IIRC
Not really available where I'm looking, all would take the cost over that of the Ultra 5
cute
The deal I'm looking at is part of an Upgrade Kit so it's hard to determine the cost of each part
$400 for Ultra 5, 16GB DDR5 and MSI PRO H810M-B
there is no way one cant get a better deal for that price no?
i don’t know how your market is, but i wouldn’t pay that here in the usa
B860 minimum, and 2x16 minimum
A ryzen 7 5700 costs $194,79?
$237,03
some horrible, horrible pricing you have
I'm from south africa
So I'm not surprised
Looking now the difference between getting the Ultra 5 and Ryzen 5 7600 is about $5
As a standalone cpu
personally, i'd go for AM5 any day, due to better longevity and upgrade paths
but again, i dont know your situation
its not like the ultra 5 is bad, i just think you can do better
Yeah but I think currently any AM5 motherboard I can afford would be fit for an upgrade by the time I'm looking for a new cpu anyway
If I was to go with Ryzen 7 5700 I would get a ASUS Prime B650M-K
What’s plistine
hm?
btw, for context, if you were to buy into AM4 instead of intel 9th gen (assuming you were to buy one at launch), you would currently have an easy upgrade path to 5000 series ryzen without upgrading anything else
which is why i am emphasising the upgrade paths argument
Yeah, long term wise the ryzen 7 5700 might be better
well no
because ryzen 5000 series is now a dead end platform (still good, but no upgrade path)
while the ultra 5 would probably have an upgrade path, but ive also heard about them swapping to a new socket already
just rumours though, so not sure
oh wait ryzen 5000 is still am4?
yes, 5000 series is am4
oh yeah it is
7000 series is am5
at the end of the day, its your decision on what to go with
7600 bare minimum, or even 7500f. 8600G too much of a compromise
personally using a 7500f, works great, 5.2ghz pbo + slight undervolt
No, just put the die on it (not sure what would happen to most paste at that temp but likely nothing good + it would be messy)
Cool. Thanks
I changed my PSU to a modular one, I plugged in every cable and everything besides the case fan works fine.
Why isn't my case fan working?
every cable that should be in the motherboard is plugged, and the case fan is plugged into a case fan slot on the board
troubleshoot. move it to a different header, check that headers settings/curve in the bios
try a working fan in the header thats not working
gotta try things to isolate the problem
theres two headers for the case fans, the fan still doesn't work in both
this problem happened when I switched to the modular PSU, so I'm guessing I'm missing a cable somewhere
try the not working fan in a known working header
the only fan header that I know works is the CPU FAN one
if the PC boots, you're not missing anthing to the motherboard
so its a pretty simple problem to isolate. either the fan is dead, the header is dead, or the header is turned off in the BIOS
moving things around will tell you what is what
noice now for 180 euros u can get a used 3060
or you have a fan hub in the mix here and just haven't said so
the fan worked before I changed to the modular PSU
hanging on that point will prevent you from properly troubleshooting and isolating the problem
no bro I'm just telling you everything that I know
if the fan is plugged into the motherboard, the only interaction the motherboard has wiht the PSU is the 24-pin and the 8-pin CPU power
if the PC boots up, both of those are connected
that I know
so your focus can't be on the PSU, its working
how does one turn on a header in the BIOS?
i think roblox is down. this is UNACCEPTABLE.
Your BIOS will have a fan control section, you want to monitor what it says is happenign with each of your headers
you gotta get the side panel off, the PC powered on, and some spare fans. start moving things around and keeping track of what happens
should be a very simple problem to isolate
Header 1 and Header 2. Fan currently plugged into header 2 isn't working but the fan in Header 1 is working. Ok, lets move the fan thats spinning on Header 1 over to 2. Does it start spinning? The previous fan is dead. Does it not spin? Either the header is turned off in the BIOS or the header is dead.
Now move the fan that was on header two and not spinning to header 1, what happens?
very simple, very basic isolation of a problem
I can't do all this for you, so the rest is up to you
I can't tell if that switch is set to PWM or DC
is they are 4-pin fans, it should be PWM
DC
You were right bro, I had to mess w the places
Case fan works now
Thanks bro you a goat ♥
What was the problem?
Bro I just switched the fan from HEADER2 to HEADER1, spin it with my finger and it started spinning by itself normally
hmm, ok well as long as its working
Which I don't think it means that H2 is broken, cuz that's the place it was plugged in before I switched the PSUs
keep in mind what i said about PWM vs. DC
But anyway, problem is solved
🤜 🤛
Beautiful day out
nuh uh
can a computer be water cooled with copper pipes?
yes
is there any downsides
i seen that guy on tiktok
Also water blocks are made from copper
Felix builds a new work PC for the Billet Labs studio.
0:00:00 - Intro
0:02:03 - Layout
0:04:31 - Plumbing
0:18:10 - Part Modifications
0:30:55 - Tweaking
0:34:00 - Final Assembly and Wiring
0:43:04 - Leak Testing
0:44:20 - Tweaking again
0:45:15 - Wall Mounting
0:45:50 - Filling the Loop
0:50:14 - First Boot
0:53:37 - Testing
1:03:21 - Conclus...
my brother is a plumber so the bending will be easy
wtf is wrong with people
decorated hands?
couple painted nails and maybe the rings are driving this commenter mad
that shouldn't be a issue
dudes gotta go outside
just grow up
Oh no it's vaguely queer time to throw a shitfit
fr
fucking virtue signaling with a couple painted nails 
i don't even know what that means
Meanwhile trump's probably got fishnets on under that stupid suit 24/7
trump looks like what a drunk guy would come up with in the character creator in saints row 2
you don't have to make any bends, or shouldn't have to if you just buy the right stuff
unless these 90's aren't pre-made, i guess i'm not sure
I'm sure thats covered in the video lol
we have a lot of copper pipes in the house
those 90s are totally pre-made
they look it
guys i got a new gpu for 2000$ from facebook marketplace is it worth it?
100% premade
gg you listened to daves garage on how to modify task manager
low effort, troll somewhere else
4gb vram ☠️
he usually has more but that video it was like 1 section at the end he had nails
cringe-ass naenae
yeah he solders brass a lot i know that i was gonna buy some brass to solder cause it seemed like fun
*brazes
just like 2 pieces of brass and then i solder the pieces together and that seemed like a fun thing to do but instead i started knitting
yeah
but like the solder is called solder so im like using it as a word like glue im adhesing 2 pieces together with glue right but im gluin em u know what i mean like they got glued
and thats not the point the point is now i know how stitching works (not knitting i thought knitting and stitching were same thing) so i can look at a shirt and be like hmm yes indubitably this is adequately stitched i would say
Did you write that with voice to text
no
some people they write and speak completely differently and recently ive been trying to match how i speak in conversation with my written messages and i just dont do the punctuation at all to make it more insufferable to read

I had stirk
god forbid a man promote his metal nail paint company
taking mac mini 2018 apart: easy.
Waiting for the 2x32GB RAM to arrive: very hard
why would you take it apart before the upgrades show up
so i know i can 😄 . I put every screw type into separate bags, won't lose any of the parts. They are stashed away now
it's not like i was using the mini anyway for now. When the RAM arrives, i will set up Linux on it
Every time I’ve ever done this I’ve forgotten how to put it back together when it’s time lmao
luckily there are tons of videos and ifixit guides
but realistically there are only 4 screws for the RAM shield, 2 for the motherboard, 4 for the fan assembly, 1 for the wifi cable holder and 3+3 for the wifi antenna metal cover. you also need to connect 2 flat cables and one power supply cable which looks like a USB3 header cable. And finally snap in the plastic cover at bottom.
is it normal for wendows 11 to use 120gb

patriot
cheep hynix
my DDR4 ones looked meh
this is 8000 1.4v right?
maybe i pickup a set to let the 6400 modules retire
This is cool, but.. How would you upgrade your CPU or memory on this?
wow, people are still trying to get rid of their X79 systems. at least this one isn't terribly overpriced, the photos are meh tho
Let’s be honest, YouTube builds are done for views, not user convenience
70 euros for Rampage IV Formula, 3930K and 4x4GB DDR3-1600
That’s why I did a soft tubing loop, it’s the most convenient of all for upgrades or cleaning
All this time
I've been wondering why DCS performance tanks after 30 minutes
its hags
fuck u random windows feature
yah 8000cl36 1.4vdd
similar quality to gskill godbin theoretically
yeah i’d probably like a set of those
Pretty normal and good feature these days, game should fix that
gets gapped by god bin
mac bin
About to trademark that shit and charge every time someone says it
Hard-line is honestly more work than worth. I plan on switching to EPDM with QDCs for this reason alone

turning it off completely eliminated stuttering & 90% of the frame tearing
what board and cpu

you have to use a65 or like a44 this board is wack
then a65 sleep seems to be haunted so good luck
we ball on a67
oh did it actually work for you
Then 8x20tb sas disks. 2x128gb ssd for boot. Should i pick more memory? Would it saturate a 10gbe connection? Raid z2 probably. Should i just fill all 12 disk?
ok fuck me I guess 
9800x3d x870 tomahawk since he left you hanging
oh. Skill issue Mike.
in my experience gear 2 is broken every other bios or so
trying a67 since it’s flashed to check i’m not crazy
i am in fact not crazy
a67 is no post
tbh Ryzen in gear 2 it either does it or it doesn’t
i mean i have a stable 8000 setup, just on a65 and not a67
my 7700x was completely stabilized in 5 mins at 7800MT/s. 8000MT/s was so unstable no matter what I did, Karhu would make my entire system power cycle.
AGESA is awesome
if a67 has working sleep i’ll eat the L for now
i’m really tempted to just buy a 14900k
or a 265k
is my chip just cursed
oh actually you used a lot more vdd maybe i’m just a cave baby
im gonna say it
no balls
67!?!??!?!
14900k or 265k
ok i need sleep that's mb 💔
yeah but which
arrowlake ftw
i just knocked VSOC down from 1.20 to 1.00 and it posted so i’m gonna try 0.9 now
windows 7 house party edition
i need an 8000 binned kit
you need a real computer Im happy with my toy 
i’m having the inverse luck
Mmmmm on today's episode of will it boots
i will now try mem try it at 1.6v
Thats nutz
lmao Zach Tech Turf in latest LTT vid
yeah 8000 just isn’t working for me rn at all
I enjoyed the T700
youll probably have to do 7800 or 7600
still looks cooler than 6000 and you dont have to blast 1.2vsoc+
it was fine literally one bios revision ago
yeah, the P3 plus is what im looking at
gen4, dont think my mobo can even do gen5
isn’t p3 plus dramless qlc
this is where a simple ssd upgrade leads to that 9950x3d i've been looking at......
There myte be better sticks for your price point depending
I think* but not 100%
read em and weep @shell void
if i'm just gaming surely i wont notice gen4/gen5 ssd speeds?
i’d get a nicer drive personally but yeah gaming won’t care
cl38 posted now this motherboard is literally haunted
I never went with QDC’s, restrictive flow
His TCL is lower
his everything is lower
im using mem try it out of laziness
in about 30 seconds im hitting restore profile and going back to my 6000 setup
why do meteors always land in craters?
tiktok is telling me the xtx is 21% faster than the 9070 xt
guess i should buy an xtx
why items always drops out of linus' hand
It’s 21% swaggier for sure but not faster
Anyways buy a 5090
need you say
s o o n
new code unlocked kyoko what the helly
my ender 3 shall live forever
bro got final fantasy mode
when your motherboard is a toxic Valorant player:
dude preordered the error
That’s an AM5 post code if I’ve ever seen one
Fault found oofs
Fantastically Fucked
it’s over my board exploded
Pshshshsh
explode
valorant players after losing pistol:
tbh i am half considering upgrading to 4k
its kinda funneh because i think 32in 4k is cheaper than 27in 4k (maybe)
(it isnt)
tbh its a very recent idea so i havent exactly gone looking for it so far
4k si definitely more expensive than 1440p so idk if i can even tell the difference between 27in 1440p and 27in 4k
yeah this thing is borderline useless
AMD post codes are a meme unironically
the only one that really serves any purpose is 15
So FF is more or less like 00
everything else is just “you’re fucked, figure it out”
the funny thing is ab when it hangs on it
the code isn't actually an error in the manual
as soon as i see Ab i just clear cmos
that's what it means irl yeah
but in the manual it's like "entering setup" or something
no wait it is an error apparently reading is too hard
one day the 4060 strix will be mine
312mm 3slot cooler for a 90-100w card is big funni
5060 super strix better be a thing
5060 astral for 500 would be an instant cop
idk what timings are kosher to use on 24M in gear 2 on AM5 so i’m just guessing and spamming clear cmos
Size does matter
do you want the pdf
no i have found the problem
8000cl34 1.5vdd will not even post despite the profile being 8000cl36 1.4vdd
i was expecting 8000cl34 1.5v and 8000cl32 1.6-1.65v
perhaps patriot was too overzealous with this xmp profile
wip
are you using 2.5v
9v
That’s impressive as hell. Karhu when?
does it come with caddies?
Not sure, i was just referencing kind of what i would buy. I realised i need to fix some stuff before i start ordering parts. (Need to fix the fiber and electricity 😅)
So this is just hypothetical build ofc i need caddies. I probably want more ram too
Might try to find a good deal on something and see if i can order ram and cpu on the side or something like that
On that note i realise im not even come close to 10gbe. Watched some youtube and i should probably add slog on raid z
Which probably means i see if i can find any pcie ssd in some form
consider 3d printing caddies, on the left is caddy i modified to be perfect
@steel stream am in downtown austin rn am hunting for scooters and e-bikes
Laptop hdd 🥲
Nah im good i take the hit
Even though i have one plus a friend who is 3d designer (of which i bought it with)
if laptop hdd was 2-3x the thickness and 4x the rpm
Used it twice in 2 years now
Ah so the caddy is just massive lmao
its for LFF while drive is SFF
Whats lff? Large form factor?
3.5” =lff
👋
@merry stirrup @shell void China Apex. Gonna assume 8000 is doable, and try for higher now.
glorious
this is indeed, very interesting
I want to focus on the interesting GPU cooling but all i'm seeing is fresh intake air being sucked out the top
that's especially damning with a double cpu air cooler setup
Yeah, I knew Nerd on a Budget would win this in the latest vid
It wasn't even close

That cooler just contacting the gpu die or does it also contact some other components?
Unless there is something else I don't see lol
Did you buy dummy ram?
no sir that is not my pc
A unique build for sure. If they went through the trouble of mounting a cpu cooler on the GPU, it makes sense to me to orient it the other direction, unless I’m missing something
I wish that G.Skill would make dummy modules
CL34 is wicked, I hope that works out!
just a learning curve
whats the difference between perless assassin and phantom spirit
phantom spirit has one more heatpipe and is slightly better performing
I think my motherboard from 2018 has just about died, because countless of troubleshooting and it just isn’t outputting image anymore in any way, surprised it lasted this long though because the board is from a prebuilt
why would it being pre assembled mean early death
must gap mike
Cheap components
I have to one up mike
do max intel trefi
if he’s going for 8000c34 I’m going for 8200c34
why not 8000c30
1.77vdd is so optimal bro
real you real for dat so real type shit on goddington
I don’t think floppas card is arriving till Monday lmao
Level1Techs helping PewDiePie was not on my 2025 bingo card
@pure garnet here is a google pic of my ”fancy” motherboard
Screams cheap prebuild board xD
i mean it’s basic but it’s fine
you guys got next day scammed
contact ups see if you can get a refund difference once it lands
he did
I think he did it through his work so idk how that would go tbh
next day (first day of next week) 
bro got next business day
the UPS board of directors thanks you for your $100 donation
It kinda makes consumer H series boards look fancy though 😭
they look about the same
like yeah it has less blank pcb placed where stuff could’ve been soldered in but they’re equally barebones basic
wtf is a tandem oled
It's for heavy anti TN
I was more thinking a H board from same gen
I bet this one has NVME SSD support too to piss me off xD
yeah the power delivery is equally terrible
Oh yeah for sure
Also I noticed I never said what gen it was, it’s a 300 series chipset board
But if I’m replacing that board and not just building a new server, that board will be minimum z370
I'm looking for an affordable ARGB controller or hub to manage 5 ARGB fans. My motherboard lacks a 3-pin ARGB header, so I need a solution that connects via USB and is compatible with SignalRGB. Ideally, the total cost should be under €30, with a preference for around €20. I've been looking and none of the fucking hubs mention how they connect to the motherboard. Or if there any other solutions that doesn't include me having to replace my motherboard
I just need to get this working 🙏🏼
The best free solution is to unplug or cut the argb connection so the fans leds are always off
USB solutions are from major brands and not 30
Fans already are always off but I wanna use them
Can some one help me find a used gameing laptop for 850 euro that doesnt suck ass?
nope. gaming laptops all suck ass and we don't know your location to shop your local marketplace
they all suck ass
get a steam deck
What mobo
Ohh but i need laptop cus i got shit eye site and move around a lot
shall i change to maximum cores
no, you revert it all to defaults
I would like a dedicated gpu in my laptop cus i chould run geforce now on my curent laptop with i7 11th gen and 32gb ram but i dont like how its only for short times with ques
you can pay...
Ya but it still says with short que and only for 3 hours or sumth
Looking for gaming laptops suck the gpus have different power levels so one 4070 in XY laptop could be slower then a 4070 is AB laptop
ASRock b650m HDV/m.2
you can get shadow instead
Ye that my main problem i watched the how to buy laptop guide from linus and theres 2 laptops one with 4060 other with 4070 and 4060 is better cus power and shit
My god it really doesn't have a ARGB connector wtf
Ya idk how tf that happens
cheap boards skip features
Ew 4060 and 3070ti level cards
why you check what you need before buying
Honestly though argb 3 pin is basic 😭
The new MasterFan ARGB and PWM HUB is capable of connecting up to 6 sets of Addressable RGB (3-pin) headers and PWM headers simultaneously. It enables users to expand cooling capability and enjoy greater system performance. Its small and compact design allows you to control your PWM ARGB fans in ...
why is the link japanese
ton of hubs like that, or even standalone controllers. but they want USB control to interact with Signal RGB
so you need to buy from major brands like Corsair, NZXT, Asus, etc
Turning Japanese, 80's hit by David Fenton (The Vapors band), official music video (1980). Full video restored, HQ audio.
No. 3 in the UK Singles Chart in 1980 and No. 36 in the US Billboard Hot 100.
℗ Razor & Tie Industries LLC. Distributed by Concord Music Group, Inc.
Lyrics:
I've got your picture
Of me and you
You wrote "I love you"
I ...
that wont work, it needs argb input
https://github.com/Legion2/CorsairLightingProtocol
and ras pi pico is 5$
ive got the same issue so i just bought a sata to argb cable and an argb fan hub, it comes next week
doubt you can find any with usb and signalrgb support
anyone playing bf 6
jorj the beta ended over a week ago
wtf
The devs are
slumming it with 2042
Which one of their hubs use USB
corsair commanders use usb but i don’t think they use argb
you probably be better off just getting an argb controller with a remote
https://www.amazon.com/ICOLER-ARGB-Controller-Strip,RGB-Control/dp/B0D3F2612Y/ something like this with a hub for all the fans
what did i do to get banned from cooler masters site
@pure garnet @merry stirrup @turbid locust 8000 will not happen.
h24m needs a lot of voltage to drop timings
the kit is rated for 8000cl36 1.4 and it won’t even work for more than a couple minutes at 1.6vdd xdddd
for c34 i wouldnt be surprised if you were close to 1.65/1.55 on that kit
probably isn’t VDD related boss
did you try going back to 1.25v vsoc yet
Have you touched VDDG, VDDQ, VPP, etc at all?
i’ve been trying different primaries, secondaries, and tertiaries with various VDD/VDDQ/VDDIO and VSOC
did you lose the gear 2 lottery or something
i didn’t have to touch vddg or vpp at all for my 8k setup
i can post 8000 g2 with 0.8vsoc and i have it set to 1.1vsoc xd
Have you touched VDD MISC
nah i haven’t touched vdd misc, vpp, or vddg
what are they defaulting to
misc is 1.1, vpp is 1.85v, and vddg is 1.05v
i’m removing the kit rn and putting my 2x32 a-die back in because i’m bored
https://www.reddit.com/r/overclocking/s/BbQ3iZAUij holy lottery loss
i mean it’s already 1.24v in the pic they sent
and asus does the overshoot of the century on that value usually
i will note that for the next time that i try
and maybe even lower misc. iirc I had to lower mine to like 1.07v for 7800
DDR5 gear 2 is just sweet spot hell
I’ve been trying to stabilize 8200 for like a good 3 and a half hours now and haven’t had a Karhu run past 22 mins lmao
I almost want to order a 8200cl38 kit but
meh
how many dollars deep are you into the chase for 8200
also wtf is the other comment talking about VRMs on the motherboard on this thread
The chase as always been 8000 I’m just a baller that shoots farther than his goals 
pretty sure it’s like 14 phase vrm or something too
not enough for a 7800x3d
i hit 8000, i am fulfilled
my cpu literally can’t do higher anyways
okay but you’ve been through 2 2 dimmers and i did it with 4 dimmer
Anyone know if a gaming laptop will charge off a portable power charger if it does 140w 28v 5amp but the laptop only accepts 20v 5amp will the laptop regulate how much it receives through usb-C
And your 4 dimmer cost???
lucky the dragon my goat except for when sleep fails to work
fingers crossed it’s been good on a67
now do it with 4 dimms installed 😈
i don’t even own 4 ram sticks of the same memory bin or size
me when my 9800x3d easily posted 4x32 6000 gear 1 with mixed kits
basically a worst case scenario and still lower vsoc than mac needs for 2x16 6000
i don’t trust the am5 memory controller to handle 2x24 and 2x16 at the same time doing more than 4800
don’t ask me about running 2x24 8000 tho i don’t wanna talk about it
this board and cpu like to do gear 1
just send it with vsoc
cope 1 mode
it’s not a vsoc problem
VSoC does not help gear 2
i can post with 0.8 and i was running 1.1
i was getting no post on 1.15 on a67 for whatever reason but 1.25v was fine
same fclk 
igpu disabled

shit is inconsistent when youre trying to run at the absolute max clockspeed that your board & cpu can handle
it just gets funky
my board is also like half haunted
no blue screens since the driver update but idk what windows pulled in
if youre having to play with 0.01v steps to barely stabilize something then you probably shouldnt try to daily that xd
if it's like 1.08v is perfect and 1.1v = crash then im not gonna mess with it
im not doin allat
i want to dial an 8000 config on the new bios just to have it
but i’ve been on 6000c30 1.35v daily because i don’t wanna run 1.65v even though its fine
high chance that the next kit of memory that i buy is ecc tbh
(it doesnt work on the tomahawk)
i’m gonna go look at TVs tomorrow so i’d like to not purchase computer hardware
i think only asrock actually tests ecc on all of their boards which is ironic given the kaboom situation
u gonna check em out at bestbuy?
@shell void 
zoom
yeah they have all the major ones
yah they had all the good shit when i went and my city is podunk
and i wanna look at a cheaper tcl just to see what rtings correlate to irl
theyre not gonna have a bunch of TCL and Hisense models on display tho
when i went it was pretty much just 65" QM8K and 65" U8QG
there’s a $200 tcl thats supposedly considerably nicer on display but i don’t believe them
but i know there’s an s90d and a c5 on the wall alongside the sony oleds
I love TCL
yeah i just doubt a $200 television is a considerable improvement like rings has it at
What model
This you now?
Nah just got the screenie to spite mike
8000 is for sure doable now but I havent tested timings at all yet
ah word
s551g
I wish they would make 32GB single rank DIMMs already, ffs
I just spent like 3.5 hours trying for 8200 but was unsuccessful
go straight 8400
real
problem solved fr it’s a magic number
i remember the bz intel memory controller rant
thats surprising
ratio
That’s 2100 fclk/4200 memclk/8400MT right?
mike y u cutting off the goods
he’s on intel so i have no clue
is this supposed to be fast
cus they dont read accurately anyway
yeah the tomahawk vddio detection is nonsensical
most are
shows like 0.86v
it just says 1.30vsoc and 0.00vddio no matteer what you put xd
I dont think my HDV even read VDDIO
same on apex
yeah it's just goofed
are you using override or amd overclocking for vsoc
override
amd overclocking reported vsoc correctly for me
Surprised it supports Dolby vision at $250
if you wanna try that later
i would expect 8000cl32 1.65vdd to work with those dimms
which should be dailyable if you have a ram fan and dont mind blasting it
it's such a small gain it's not worth
shit, im not sure above 50k is even worth
I have a Pure Wings 3 on it at like 50% rn
it shows 0.87vddio today spectacular
you’re dropping cl (ego timing) but won’t max trefi? as ennui says, no balls
maxing trefi on intel is useless
That’s a high VSOC though
just bringing in instability for what
yeah it doesnt read correctly
We are not apes we have better technology then blow air on hot thing
try amd overclocking vsoc
its the day that i eat applebees its applebees day i love applebees yay day the applebees day
wow that's so peak
I dont btw
I thought about that, but don’t you need to remove your heat spreaders for that?
liquid nitrogen cooling when?
recently found out that applebees doesnt cost as much as i thought so now im gonna be eating applebees way more theyre great love me a good applebees i tell you hwhat
Fucker is still out of stock
an applebees a day keeps the doctor at bay
an applebees a day keeps the doctorbees at bay
an applebees a day keeps the diabetes just down the way
its not that bad its just like burgers n salads n soups n stuff
I'd love a good tomato soup rn
if people live on mcdonalds for 50 yrs applebees is definitely a step or two above that
old people and their mcdonalds i do not understand it they spend $20 on a breakfast at mcdonalds
the vietnam pension is going crazy and they aint got no reason to not spend it i suppose so good for them
when i worked at mcdonald’s i would just see the same people walking up and i’d pre pop in their orders
they’d just come daily at the same time
damn the h264 transcode engine working overtime on a chromebook
what do the veterans people get after they retire they get money from something right i thought it was a military pension
that works
wicked
Ah I forgot those exised

yeah one of the bios updates mentioned it
idk how late-stage adult stuff works im in early-stage adult still (havent bought an outdoor furniture set yet)
wicker chairs
what’s the point of outdoor furniture
yeah i’d love a giant spot for pollen to collect
are you like 14 or some shit
to sit outside while grilling food
Yeah just put them indoors
folding chair meta
and if you have a house party you can sit outside while the wives have a conversation inside

folding tables are actually meta for everything because it’s super easy to replace, if you burn a hole in it or something then you’re only out like 100 bucks
hello
Hi
speaker stands arrived today
cant put weight on them or theyll bow over time though
its not super noticeable but itll roll a marble
yeah but by the time it’s like a lga1700 cpu you can just buy another
salam alaikum
I can't the angle on my speakers quite right now
ok there we go lol
its the thing like u buy a good pair of boots once or you buy a bad pair of boots once a year for the rest of your life
my grandma has an old plasma tv sitting on a folding table
Two sawhorses and a piece of plywood perfect outside table
it’s pretty peak
وعليكم السلام رحمه الله
two sawhorses or you can use 2 filing cabinets, 2 drawer ones end up at around 30" i believe
instead of plywood you can get a flat door though
Also took me the longest time to figure out that my Klipsch the Fives have rear firing speakers
doorknob hole is good for running display cables
i thought a lot of modern doors are built with cardboard in the inside
my son is pitting me against my wife
Make sure the doors old or dont put heavy stuff on it
he wants an RC car and is like $100 short... I was like "no problem" and shes liek "no its $100 more than you have"
Correct
wa alaikum assalam wa rahmatullahi wa barakatuh brother bone
so now my speakers sound like they come from my TV
I dunno... he's 90% yolo
i think you should get him the car
i have not gotten this memo last time i used a door for a desk-top was like 15 yrs ago
How fast does it go
Have him take out a loan at like 15% interest to learn
Oh I am 1,000% buying it for him and then acting confused
i know people snapped their linmon in half and saw they overpaid for honeycomb cardboard
@pure garnet your future monitor https://www.youtube.com/watch?v=nXcz-52ZtXc
Thanks to ASUS for sponsoring this video!
Check out their upcoming tandem OLED gaming monitors using our link: https://rog.gg/tandem_shortcircuit
Plouffe takes a look at the ASUS XG27AQWMG, a 27-inch tandem OLED gaming monitor with 1440p resolution, 280 Hz refresh rate, and 0.03 ms response time. With true HDR punch, glossy finish, and advance...
i like a good door
glossy 4th gen w-oled
i am not remembering that social security number model name
I love that face😂
i also like a good baseboard, lot of places dont have good baseboards
i saw an oled monitor the other day and it honestly didn’t impress me a ton
but i also didn’t sit down and stare at it because i was holding a printer box
حياك الله ياخي
Anyway how's TC2?
cause monitors suck, and probably uncalibrated SDR
shame its only in Ant size
i don’t think any of the games i play have working hdr
or hdr support at all
good
ffxiv doesn’t have hdr and destiny 2 has broken hdr last i knew
yeah the G9 OLED in Micro Center did nothing for me, but my 321URX's are money
destiny 2 also has a bug where it’ll freeze after some random amount of frames so i have to reboot it after like 5 hours if i leave it open
these new 4th gen woled monitors are awesome for SDR
i’m going tomorrow so i’ll get the model number of the one i saw
theyre doing like 335-385nits fullscreen in SDR depending on the model
@edgy laurel have you seen the Cleetus vid today
i run my phone at like 40% brightness
what is this, a monitor for ants!
it’s the only oled panel i have of note
I actually quite like D2 HDR
turbine stuff, yeah. also saw on reddit he just competed in some big offshore powerboat event, something turbine powered
Sunshot really sings in D2 HDR
so there will be a video on that soon
Anyone recommend a solid gaming headset with a good mic ? i play mmo and survival games so something with some decent bass/highs
i don’t keep up with the patch notes because i’m not into the game enough atm

what kind of interior doorknobs do yall use
i like the one with the handles
https://www.rtings.com/headphones/reviews/best/by-usage/gaming
https://www.rtings.com/headphones/reviews/best/wireless-gaming-headsets
The best gaming headset we've tested is the Audeze Maxwell Wireless. The headphones combine audiophile listening with gaming features.
I just kick them down /j
yeah the circle ones without handles i dont like in some spots, like a bathroom should have a handled doorknob i think not a circular one because what if my hands are wet from washing my hands as I so often do and then i gotta open the door for whatever reason then i cant open it so easily
yeah being able to elbow it is a major benefit
I can open a round door knob with my elbow it only hurts a little or alot sometimes
it can be done but its not fun
ok I am running into 50 series issues
do you have an HDR monitor, I found some nice pictures last night https://lightroom.adobe.com/shares/113ab046f0d04b40aa7f8e10285961a7
then its board, playing with resistances will likely get you somewhere
i have an “hdr” monitor rn
Since these images, the base level isn't jacked way up above SDR so you can actually see what the HDR effect means
omen 27qs
i need to get faster ram
1200mhz to slow
rip
try it on your phone :trol:
especially image 6
no 70ti today L
monday IG, shoulda just got ground shipping
minor losses its aight
Are there any downsides of getting a 2242 NVMe over a 2280
compatibility
but that applies both ways
not all boards will have standoffs for tiny drives
I know, but actual downsides, rather than sizes
not speeds thing
Is a 2070 super for 150 bucks a worthwhile pick up?
compatibility as in "will it fit and install"
not really, spend 50$ more for a 3060 or 3060ti
USPS, FedEx?
UPS
dhl
You do realise a 2070 super falls in between those cards in terms of performance?
I may have written speeds instead of sizes
Ah I pray they don’t yeet the box
yep and has its own downsides
Nothing really. It's just a physical size design thing pretty much
if only i had dimmfit to do that for me
3060 ti is 220 where I live, still got 8gbs of vram like the 2070 super. Also it's maybe only around 10% faster for nearly 50% extra price
i’ll have to buy a Z990 Apex next gen, there’s really no other option
someone on hwbot or ocn thread can likely give you resistances to play/start out with
@merry stirrup Okay so the motherboard I had in mind don't have a 2242 slot... Would it be okay to just keep it hanging there? - Or duct tape it down?
Errrr
Around 30 dollars
wtaf
what
buy sata at that point
Addlink S90 Gen 4, 512GB, 50 dollars post tax
Micron 2500, gen 4, 512GB 2242, 22.2 dollars
both new?
Yes
get a 2242 to 2280 carrier board?
Unfortunately the only sort of adapter is available on amazon
probably not worth it iin his area
And.. That either means 50 minimum in shipping, or not available entirely
Her*,,,,,,,,,,,
taping it down is probably fine
ive done it before but definitely not without minor problems throughout my duration of owning computer
Yeah tbf I could be putting the extra 28 to something more important
careful when shaking or moving your pc esp if its untaped it might come loose and not boot and then youll freak out for an hour trying to fix it and then you realise that you just needed to plug it in more
I am eventually going to either put it into an enclosure or retire it to a PCIe adapter card
floppa we should sue UPS
lowkey my fault for not reading any fine print but tbf the lady i was talking to at work literally worked at UPS before this
i had a UPS driver throw a package for the first time ever
so its a 10$ difference
So it's around 20 dollars in different
oh my bad
22.2 vs 42
yeah yeah yeah still not worth it
yeah i did some dyslexia momenent
i swapped the 42$ for the 80 in the 2280 and read it as 2242 is 40$
I think for the extra 22 dollars I can get a better board lmao
Yeah fair enough
its only 4:30 i dont wanna be eepy 😭
i woke up from a nap at 3
i napped earlier
i dont get to sleep in unless on weekends so i take my time eeping away
ive had a carefe of coffee and im still yawning like mad
i just got back from eating lobster tacos
how were they
i dont get a full 8 hours i just do 4 hour cycles so occasionally it loops back around to a normal schedule for a day or two
what else was on them
lobster
i dunno i just focused on the lobster part
blobster
(crab is better tbh)
i get 3-5 hours on week days and however many i feel like on weekends
Oh my gosh look tasty
looks like the marketing material for taco bell's tacos and not what taco bell tacos actually look like
dont get lobster at taco bell
the roasted corn though yesssss
yummy
its too damn hot
im going to peytons house and taking the aircon for myself
fuck you peyt you dont need it
i ate a salad earlier i freeze the plate before putting salad on it so it stays cold pro tip
Okay the better board within the general 20 dollar range is a prime B650-Plus
noo i need my aircon 😭
I love air conditioning
nope nope nope
Which is definitely a big win considering it's not a B650M-B
was 78F outside and breezy over dinner
my house is currently 70f and its near 100 outside its so wonderful
It's currently 2:40 AM
its like 100rn yea
its been rainin all day so its 100 but my home is still chilly
was thinking of watering the house or something
Whats the coolest temp you have been in in the summer
but its really only the upstairs thats like uncomfortable
yeah im really glad I don't have a multi-story house
That's when I can keep the fans on level 1
@edgy laurel watching some dudes walk thru at some Cars and Coffee and he's all about this old foxbody, walks past a GMC Syclone and is like "Ah, GMC, nice." and keeps walking
LOVE THE SYCLONE
like dude had no idea
man if only he knew
Would be a tall tail
not sure if floppa is trollin
huh
-OKAY so it has 2x M.2 slots (both support 2242) and the primary one is 5.0
no i actually do like the syclone
believe it or not, the rich kid high school i went to.... one of the kids had a GMC Typhoon
Do you want me to box up some refrigerated air and ship it to your house
AND it has a BIOS Flashback button yay
4.2 second zero to 60 or something
yooo
never seen one
very cool
its a cooler car
yeah
typhoon is cooler than the mirage
everything is cooler than the mirage
yeah but the mirage can do flippy-dips and has matras
Alright. To 6000MTs EXPO i go. I want to play games now lol
I drained my air compressor today.... lets just say, I was passed-due
lol
ewww was it all gooey
i was out in the shop on friday and i blew out all the computers for the first time
it was... like... a half gallon of rusty water
g r o s s
and oh my god. oh my god. ive never seen thicker layers of dust on functoinal computers
all that bead blasting and powder coating
literally the slot part of a pcie slot was ENTIRELY full of dust
not like a lil coaitng no the slot was full to the brim with dust
started sneezing
I think the dirtiest pcs that I see are the ones in old dudes' garage shops
yeah now x20 that and thats the shop
yeaht he pc i used to have hooked up to my cnc mill was horrendous
oh god nty
we do a lot of wood working, sawdust everywhere
we ONLY do wood working if that makes it better
theres nothing but saw dust and grossness in there
yah - cutting fluid/oil/water + aluminum dust + PC
oh boy vacuum it all up and light it on fire while blowing it out of a leafblower
yeah i blew out the cnc computer (on a pentium based computer btw)
literally had to wear safety goggles
mine was like a p4 lol
hurt my eyes so bad
this is some like 1155 dell vostro or something
oldest computer we have in use for sure
why tf can I next-day a single P12 Pro but not a 5 pack
I want to say mine was a Dell 755 or something
you dont daily your OCs?
its not validated
Not when it's not stress tested yet
new board im sure hed rather not stress test for 16 hours before using it
back in HS the woodshop took the old floor water drains and turned it into the vacuum points for the shop dust system- their cnc system had it's own computer, like an amd geode or something
eerily enough the zcorp resin-powder 3d printer had nearly identical hardware to the woodshop cnc
i think i may take my rig to the gfs house and oc it there since thats a like 5 day period that im not working
Besides I only did like 3.5 hours of karhu at 8000. It could very well not even be actually stable.
i daily my aggressive tunes but i run ycruncher and/or karhu alongside furmark for 12+ hours for sanity
she gets a 3080 this week lets GOOOO
I dont see how this is stable but
like a rock, baby
The only running I do is running out of coffee & water
will do well for any gaming
because I was just failing 8000c34 at 1.65
you should oc ur ram for funsies
dont you have a 10850k youd actually see gains
you aint on 6000 CL26ers
i doooo have gskill now
I am lmao
well what IC
i should absolutely jack vdd up from 1.43 to 1.60 just to run lower tCL
well you ain't on Apex 💪
or XMP bin
this kit
https://www.amazon.com/dp/B0171GQNH4
you're right im on china apex lmao
@merry stirrup Okay errrr there's two options, same price
Open box Samsung PM6B1
New Micron 2500
Both $20 pre tax, M.2 2242, 512GB, PCIe 4x4
& boarb?
pm6b1 is definitely an OEM drive of sorts, either enterprise/workstation or just actually OEM
msi z490-a pro
er'day
usually said drives have HALF the write speeds of their consumer counterparts
which, on an NVME drive isnt slow, but something to consider
.... Yeah, I'll just get the Micron 2500
respect
Tbf I am upgrading from a 2008 Dell enterprise hard drive and a HikVision SSD (glorified HDD)
can u test scl performance or sumn
WHAT YOU WANT
Even a Gen 2 Drive will be exponentially faster than what I have
i only have one am5 cpu at my disposal
see if 6/6 or lower like 1/8 or 2/8 or 1/1 is faster than 8/8
i love pcie gen 2 nvme m.2 drives
i see people running 6/6 a lot and 1/8
I think I had to settle here for 24/7
i just refuse to believe 1/8 is performance
noted
i have some samsung dimms so bad they cant do 8/8
has to do like 8/10 or 8/12
what settings do you think I need to do 3600
It's like the RTX 20 series
Now, pretty "lackluster" in performance, but curious little pieces of technology that were the stepping stone to what we have today
3600 16-20-20-36 1.45v dram
I spent a bunch of time getting trfc down to 120ns and then bumped it a hair for sure fire reliability
can u show me cpu-z SPD and mem tab



