#tech-chat-2
1 messages · Page 26 of 1
the 3008WFP felt nothing like anything else Dell made. the stand and base were Apple levels
so 2007
listed 6 years ago... do I message and ask if they still have it? đ
right?
UYES
sheila burke
this is actually a decent looking build.
Bit on the high-side price wise, but....
okay I laughed:
any ssd recommendations for virtual machines? the nv1 is horrible and causes my vms to crash. my cpu only supports gen 3 but i dont mind gen 4 for if i ever upgrade.
i'd want 2tb-4tb.
sn5000 for 2TB
good for vms
as the nv1 was recommended by ppl here i assume i didnt mention vms and when i first got it was bad, it got worse and worse
now im using my 500gb for vms which is annoying
you would want something with high iops
got any recommendations before i do research?
SN850X is frequently a solid price for a very good Gen4
lol
for consumer, yes
alright
using an sn850x as main drive, can confirm it's a good ssd
so should be fine for my vms and not cause them to freeze and crash like they do on my nv1?
i use Samsung PM1635a for vm store (old netapp sas ssd)
but muh iops
dudes running a vm or two on his desktop and y'all are talking to him like hes building out a corporate VM server
like any of these drives are going to make a difference
SN850X is fantastic and usually on sale
xd
pkcell
for a gen3 a 970evo will be just fine
two-three for quite a long time
1grit
he needs at least some optane for metadata
yeah this is basic consumer level stuff. any quality name-brand drive will do just fine
i use them for running windows apps and stuff i dont want on my host computer (potential malicious apps)
alright just scared cuz my nv1 is ass
nv1 is ass
got it
any samsung or western digital nvme ssd will probably be better than a nv1
look into windows sandbox for that
i am on linux mint
but will do đ
what hypervisor do you use?
i use vmware
as it suites my needs, 3d acceleration is good which i need for recording
although broadcom sucks
proxmox is my go to
proxmox is good but i run nvidia
and dont want to deal with flashing drivers to my card to do gpu passthru
plus i dont really need too, vmware works fine, i got davinci resolve running thru distrobox
thank you.
imma look into a nas for the future too
also since ya'all here anyone got any 4k streaming box recommendations for around ÂŁ100-130 or below
want something better than my tv for using streamio.
Oh non usd person
AppleTV
sounds good
AppleTV
i was looking at the nvidia shield but apple tv will work with my iphone
AppleTV all the way, except for some very niche use cases
Im a Nvidia shield pro user
cheapest 2TB and 4TB DRAM equipped drive at least in the US right now. https://pcpartpicker.com/product/kbwmP6/msi-spatium-m480-pro-2-tb-m2-2280-pcie-40-x4-nvme-solid-state-drive-s78-440q600-p83
https://pcpartpicker.com/product/dcBzK8/msi-spatium-m480-pro-4-tb-m2-2280-pcie-40-x4-nvme-solid-state-drive-spatium-m480-pro-pcie-40-nvme-m2-4tb



NVIDIA Shield Pro is very very good, I just don't like recommending hardware that old, and I think that tvOS is fantastic
Yeah $200 for it now isn't great too
yeah
I just hated my Roku stick that reached over 100c
dont care about cheapest
i was looking at regular nivida shield
the one thats circular tube
honestly for iops optane might be the move
No cooling just a plastic thumb drive
i probably dont need shit tons of iops
although my vms are running for days on end
i didnât bring my airpods to work itâs so over
i had a roku once but it was a nowtv one so even more limited
you don't, you're not running a database server for a major corporation.
sn850x is a good drive
heatsink or non heatsink
35c drop in temps with my am3 cooler zip tied to it
I have a few of these and can confirm
depends on what works for where you're installing it
perplexity says its good
if your board doesnât have a heatsink iâd get the heatsink one
let me go see i will be back
oh no..
how does one Roku thing-a-majig run 100C is what I want to know

how does one monitor a rokus temps
It was just in a fully enclosed plastic coffin
people are asking AI opinions on things in real life. this is what we've come to.
Secret button mash menu
it does but not where im installing it
im doing it in the middle of the board so il get heatsink one
then i would get the heatsink model
more expensive tho đ
how much more
let me see saar
you can buy nvme heatsinks on amazon for cheap
if its a good drive i might as well pay extra
donât treat it as something optional then
20.96 not bad
itâs a cpu cooler effectively. you canât get away without one even if you want to be cheap
yeah i dont plan on not getting it
đ
my nv1 doesnt have one that probably isnt helping
nah AppleTV all the way
gen 3 shouldnât be getting hot enough to need a cooler
gen3 probably wonât throttle unless youâre installing a game or something without a heatsink
but is the nv1 qlc or tlc
it will if youâre installing a game/verifying files
extended read/write lengths
imma need to use infuse and web streamio no native app
oh do you have your own media library with an atmos setup?
prolly qlc
alright il get that drive then
luck of the draw
nope.
lol
not my own cough
bro.. not a chance
what am i looking at
what is a linus hole
Why but an eBlaztr, of course.. yep.. uh hu
idk mane iâm pretty sure my g3 throttled with no heatsink during big game installs
ok but then why Infuse
and hows that pronounced
just curious
Top left mine showed over 100c after streaming a 4k movie đ
pretty sure? shoot dude i ran one on the backside of a motherboard (970 Evo) and i couldn't make it throttle
mayhaps iâm misremembering my g4 drive
fun fact, roku selects a random device model to run compatibility tests for channel deployments so sometimes a channel can pass on decade old hardware and not work at all on brand new hardware
I hate Roku after my thermal nuke stick
Uhgggg day 4 guess I have to quit procrastinating
typically they dont let you deploy if the channel doesnt work but if u just keep rerunning the test eventually youll get an old device model that isnt capable of checking some required features
What are we forcing you to do
i hate roku because they make random changes deleting livelihoods overnight with no notice
reddit says i need too
for streamio
since theirs no native app for it
Trying to do 5 sets of 30 curls, skullcrushers, and calf raises for 5 days a week at least to start getting back in shape. And today I feel like a potatoe
đ„
and i like streamio as extensions are web based so you dont get malware the way its setup
With a certain brid app along side?
anyone mind roasting my parts list https://pcpartpicker.com/user/ItsMias/saved/#view=xffYLk
Saved Part Lists
I might run that too
i was just browsing gpu prices and i found thisđ
no windows copy for like $200
if you want a debrid recommendation i can send one in dms
running linux đ
thank god
The ram and SSD kinda suck
first time on amazon? Ancient cards offered for sale new are going to have absurd prices. nothing new
Nah I'm good with my setup and extension
Other than the M.2 choice nothing really comes to mind 
nice i assume u use streamio too?
what about it? it's ddr5 and 6000mt/s
Yup
i know it's just crazy i remember 3050 was the "best" gpu on the market back in 2021 at a "great price"
You want cl30 or lower not 36
on apple tv or what?
My Nvidia shield pro
nice
A 3050 was never the best at anything
i know it's so bad can't even run rt low on cyberpunk
What is up with the ssd 
The app is named âStremio Liteâ because it does not include the streaming server that is available on the majority of platforms. This means that torrents will not be supported in the app
makes sense
lottery if QLC or TLC
usually better options for similar prices
any recommendations?
also let me figure out what these things are lmao
only if they intend to overclock or may in the future
I see
if youâre not, buy any 6000 kit
smart way of keeping your shit slow xmp ram relevant is to buy smart and oc it in the future to something that would be normal for the time
much faster drive https://pcpartpicker.com/list/GV8R3w
Part List - AMD Ryzen 7 7800X3D, Radeon RX 7800 XT, Phanteks XT PRO ULTRA ATX Mid Tower
TLC, dram (for those that care) and the same price as that crappy Crucial
Crucial used to be goated in the ddr4 times
i have bought enough to say its just qlc
thatâs how i justify my 24gb m die surely
8000 soon
Also you can get an NM790 (which is TLC) of the same capacity for how much that P3 Plus drive costs
interesting
uhh by the time d5 is out of meta (ddr6) , 8k will probably just barely be normal so if youâre buying 8k flat out youâre just..buying an actually good kit
6k c30 is the bare minimum thatâll typically be hynix aka worth ocing
i bought a 6400 kit
oh i see okie
that can hit 8k now
I will look into it! ty :3
honestly though the difference between hynix and micron is only like $10
so itâs worth getting hynix unless youâre only running expo on
yes i think itâs worth it if youâre a shred of an enthusiast
unless micron has a cl30 bin now
4 years from now when you want to get into ram oc youâll be happy you bought an a die kit
i still havenât tried my a die
adie gud
yeah but 24gb m die is also good
not meta
benching yo
bought the drive
and a ugreen m.2 enclosure
for when i need to access my nv1
and got a ugreen magsafe battery bank cuz my phones battery is like 70 percent health wise
who partying with me
https://pcpartpicker.com/product/vrJp99/teamgroup-elite-plus-32-gb-2-x-16-gb-ddr5-6000-cl52-memory-tpbd532g6400hc52dc01 omw to get a cl 52 kit
TEAMGROUP Elite Plus 32 GB (2 x 16 GB) DDR5-6000 CL52 Memory (TPBD532G6400HC52DC01)
Eh, could be worse:
Microcenter charges 80$ to install a cooler, and 30$ to update the bios.
They better delid it for $80
if the PC wasn't 2000 miles away (literally), I'd just do it.
Uh
i think thatâs jedec donât quote me on that idk
Can you scam your way into having the poor microcenter employee build a custom loop for $80
The tech did try to sell me on replacing the 13700K.
But she hadn't seen any crashing, so, not quite yet. Hopefully the chip is still fine.
So, all goes well, the BIOS Update he's doing will prevent any further degredation
they donât list the voltage so i dunno
But I feel like it should be $10 for installing an air cooler if you buy the cooler form microcenter
oh yeah they do itâs jedec
Hello foopa
eh, he did other testing, too. So it's not like he plugged it in and said "here's the computer"
So I can't fault them
i think it's a borked pcpartpicker listing too
Who what
yeah, at MC it is.
He plugged in a store drive, and such, and booted and tried to run some tests. So I can't fault them for the pricetag
it's not just "slap on a cooler and call it a day"
But do they charge $80 to slap on a cooler and call it a day
$80 is on the higher side but iâd expect like 50 bucks
Time to make a post to have em fix it đ
Between a B650M-B & A620M-E.. Which would be the better option?
the first one
I'm not paying it, and it's cheaper than shipping a PC back to boston from colorado
it takes time to install and test plus itâs a physical store
B650
10 dollars is not enough of a discount to downgrade to a620
$10 so isn't worth getting a worse chipset
I didn't even look up those boards
B650 is a better feature set
For $10 get b650
I mean, isn't the B650M-B considered one of the worst B650 boards?
Which is the only reason I was asking
For what CPU
R5 7400F
looks fine
On 1x16GB of 5600MHz
they look like nearly identical boards aside from the chipset and it isnt worth downgrading to a620 to save $10
On my god like the most basic CPU
Even a shitty board will run it just fine
arghhhh
Good thing I can't read
I want to get 6000MHz but the price difference is too dubious
no, single channel
Cheapest kit is a hundred dollars
you said 1x16
if you cant afford 2x16 then 1x16 is better than 2x8, but single channel is pain
short term performance is not the play
The board is supposed to last me until uuuh
Like 5 years minimum
yeah so worst case put vrm heatsinks on it
any board is going to have a very similar chance of breaking assuming no defects
youâre within its means, youâre chilling
honestly just have a fan blowing some by the vrm and youâre good
7400f is what, 65w?
Yes
The case has ample airflow and cooling
Aura GC7, comes with 3 fans by default
No overclocking - except XMP to get to 5600 - tasks that'll probably never get the CPU above its standard TDP
Nothing is really going to strain it
you might not even need expo for 5600
i think my sticks boot at that with a cmos reset
could be misremembering might be 5200
no overclocking is L
floppa would tune the 1 stick
I don't really know my way around OCing and I'd rather not do it with hardware that costs like 280
the only settings i did to my sisters board were fclk 2000 and 1.15v soc instead of auto
I'll check
youâll see when it boots
2V soc time
Sets done
when i first got my 7800x3d my old stock board was still on the kill the chip bios
All results say 4800
Chris Brownâs âXâ available now!
iTunes: http://smarturl.it/XTheAlbum?IQid=yt
Amazon: http://smarturl.it/XTheAlbumAm?IQid=yt
Follow Chris Brown
http://www.chrisbrownworld.com/
https://www.facebook.com/chrisbrown
https://twitter.com/chrisbrown
http://instagram.com/chrisbrownofficial
Music video by Chris Brown performing X. (C) 2014 RCA Re...
id tune anything
i tuned an almost 20 year old dell workstation at work for fun
do i sauce the 13700k in the work back room
itâs on ddr4 though because i donât like them that much
prolly not
- case & 512GB booter drive is 348.58
Elaborate
wdym
i click button and clock go higher
until that shit js black screens right in front of me
Oh,, just that ogay,,
via SetFSB
not bad at all
I already have the GPU and other storage (240GB SATA & 2008 RE3 1TB), so those aren't counted
I just hope that the 7400F and 5700 XT work well together
My i5 4460 is genuinely bottlenecking it to hell
eh at least you have gpu
do you have a real 4460 computer or an oem
OEM
sad
But not from any known company, or even any company
id tell you to fuck with it for fun but prolly cant do anything
It's just a no name case with an MSI Chinese board
B85M-ICafe
It has OC Genie 4 but I doubt I can do much with it
ah yeah naw ive heard of the icafe ljine
do you get ram timings?/freq? youd get the most out of that
The manual online is in Chinese
and you can set 103 bclk for a whole 3% clock speed boost on the cpu
I haven't tried anything
The RAM stick says 1600, task manager says 1600, I am satisfied
(ddr3 can do like 2400+)
And until I can afford to make this old croaking system a secondary machine
I can't do anything
might blow up the ssd tho
So I will wait until:
A. The A320M & 2600 guy responds
B. Save up enough to go AM5
feel like am5* is a better option anyways
Want specifics or
5600x & X570 Gaming 4
1x16GB 3200
yeah a 2600 isnât really moving you forward much
From an i5 4460?
yes, youd be surprised
I hope youre all well today 
maybe moreso now adays the 2600 is faster by a good bit but on release since how single threaded thigns were, 2600 isnt even much faster
Is it only until Zen 2 where performance increases
Then ig I should either go "higher" end AM4 or entry AM5
for am4 to at least be worthy of a computer
entry am5 is as fast as a 5700x3d at the worst
(dont get an 8400f)
is america even a real place??
(dont get any 8XXX cpus)
who the f would pay 13k for that
I don't like how it sounds and 7400F is cheaper
and better by a lot
but yeah the am5 starting stack is just better
7500/7400F are as fast as a 5700x3d in most titles
My mind correlates that 8400F = Bad because I was looking at info for it when eating like the worst instant noodles I've ever eaten
its bad because its an 8600G or whatever without an igpu so it has half the cache and less pcie lanes
I guess that settles it
the 7500F is just a 7600 without an igpu
aka a normal non gimped chip with full cache
7400F is?
7400f is a shittier 7500F
usually pasted and not soldered under the IHS, but still has all the cache
Ah.
shouldnt make a large difference
like basically immeasurable from an "im never going into my bios" perspective
I guess there's no point then? In getting a 5600x?
now youre getting it
U
I hate loud noises and crowds
and have fun
we'll just blind fold and give you nc headphones
No you just get screamed at by a crackhead
gotta follow us by scent only and good luck with that
this is actually true
gotten to the point where i start yelling back im so fr
đ
Atleast I won't need to check utilisation to see if my cpu is slowing everything down again
Actually I have a feeling the tickets are more than $7
only reason to go am4 nowadays is basically if you get it for free/a good af deal
Will take a few months to save up for - which means having to upgrade whilst in school, AKA big yikes
like my buddy just went to am4 cause he got a 5600, board, and 32 gig kit of ram for 100$
(previously had an i7 6700)
I assume 88 dollars for a 5600x new in the box with a stealth cooler isn't a good enough deal
no lol that should be the cost of the whole combo
lock, you should take around for E3 12XX V3 xeons near you
The poor lad
1151 v1 was so lackluster
a 1230 v3 might be a pretty big upgrade for you if its cheap enough to justify (idk under 20-30$)
(its just a 4770 without an igpu)
Reminds me
For 150 US there's a
Yeah you're not wrong
yeah
It was fine but very unexciting
the cool mutant chips are sick on it
Especially kaby lake
and modding the boards actually makes them sick lowkey
Laby lake was a yawn
cause then you get the longest supported intel platform
leave my son alone
Damn
There's an E5 2680 V4 - "Keyiyou" X99 board (image attached) - 2x16GB 3200
Apparently all new
Haswell?
Fair enough
is it free
Broadwell was late and almost immediately replaced by skylake
Even worse than 11th gen
(this is actually a 4790 delidded but i couldnt find a pic of the 7700k, close enough)
why didnt it send
150 dollars </3
pain.
tell them to die lowkey
do not disrespect the 5775c
All 8 of them
It was a cool chip but late and underwhelming
i got my grandma on my delidded 6700k
No I mean
I am SEETHING that I can't get it normally,,
Just LOOK at what it's being subjected to
it brought the iris name for the igpus iirc and it was first gen 3 cache
That POOR 5820K
oh thats 4th gen
In all that DUST
Broadwell,,,,,,
Taking a dust bath like a chinchilla
E stnads for extreme
Oh
haswell-r was not broadwell either
Well whatever it is
WHY'S IT HAVE TO BE SUBJECTED TO THIS đ
thats devils canyon
Back when Intel made high end enthusiasts products đą
heres an old rig pick
A whole generation with a whooping 2 desktop socketed skus
Anyway gn
The loud ass EVGA aio!
not loud if you replace the fans
found the 7700K delidded, this is like my 1yr update
had to mix it around again then it was fine iirc
Where's the fucking heat spreader
like the ones that sit aboe the pot and blow of the shit away
gone for the pic duh, i do the easy method and just put it back on top w/no glue and let the ILM do its job
Remember when crucial made good dimms
crucial ballstix
i had a cursed config tho
creme de la fraiche
i was mixing 2016 bdie with rev.e
config was stuck at 3200 but not for reasons apparent
board just didnt go above 3200 đ
Now crucial ddr5 dimms are basically ewaste
so i ran 3200 flat 14's
Yeah theyre garbage at ddr5
did you run direct die or replacement toothpaste
liquid metal
I don't understand how
no dd on 7th gen
their d4 wasnt great to be fair
it was just moderately okay for daily and ryzen
there was a bracket for it i saw on ali
for 9th gen
Does anyone happen to know if the iGPU in an AI Max 385 is still faster than any iGPU in any traditional desktop part? The Max 385 is not the top of the line Max+ 395.
i remember looking it up iirc 9th and 7th have diff die height
either way ts is long gone
i sold it relidded and didnt tell them
(forgor)
i also sold that board bios modded for 8th and 9th
oops đ đ
i believe so but don't quote me on that
i think so too but finding useful benchmark for this uber niche stuff is a pain
i just have some thermal paste under mine and itâs living the best life degraded handling facebook in firefox all day
reported to police for fraud
i went from errrm 4.8 to 5.1 on delid or sumn
yeah prolly
if bro ever finds me somehow again ill give him a cpu or something idk
oof
mine did 5.1 at 1.35 apparently
but that had to have been 1.35 in bios
https://www.techpowerup.com/gpu-specs/radeon-780m.c4020
https://www.techpowerup.com/gpu-specs/radeon-8050s.c4271
given these spec comparisons, yeah I'd say so
cause i didnt quite get loadline at that point
so it was probably like 1.2 load voltage
i still donât really understand load line but i havenât touched cpu oc in long time
its kinda easy
load goes up voltage goes down but wait this isnt bad
its quite good
oh cause physics
well no i get that part but i meant configuring it
equal and opposite reaction always
uh set it to what works that isnt flat unless youre a freak
my 7800x3d is so locked down i simply just do not care to mess with it
theres a bazillion ways to approach tuning, who am i to say youre wrong
(besides when you really are)
valid af id keep it that way
i got -20 stable so it does the max clock more but iâm not messing with bclk for baby gains
(so because of that you dont want the voltage to stay the same as idle under a heavy load cause your vrm has to deal with that spike of load and end up dropping voltage super hard before picking it back up again
CHAATTTT
i have wallhacks in cs somehow and reinstalling the game doesnt fix itđ
sorry what did you say? i set 1.10/1.10 loadline and my 14900k sits at 1.55v with nothing but hwinfo open
đ
bro dont you know youre lying to people if you dont run equal loadlines
h smh smh bro cmon bro dont change that at all bro
jerry, btw...
what difference is this vs the 0.8/0.8 i ran
tbh idk ive never tried lowering both values and keeping them synchronized
i think that undervolts the cpu but tells the cpu to keep the voltage requests the same
guys has anyone seen this before in cs? ive reinstalled my game and updated my graphics driver, nothing makes the walls visible
that was the default on the z790 tomahawk
the default on an ancient bios on my z690 taichi was 0.50/1.10 so that's what i learned on and kept using
lower voltage but it wont lower or increase further than it should with load
its like minecraft xray, i js wanna play cs
lol
then adjust ur curve optimiser
no
you cant do +200 /0 curve optimiser?
the 7800x3d cannot go past 50.5 ratio without bclk
oh its ryzen 700
Progress. Anything less is going backwards.
Nobody wants that.
yeah fun fact enabling the +200 clock offset makes it slower lol
forgot that that indeed happened on 7000 x3d
tbh cpu overclocking for legitimate gains has been dead for several years now
+200 on a 9800x3d is AT MOST less than 4% gain
its all ram and always has been
my board doesnât even have the offset as an option
thats wild
raptorlake has to be underclocked xddd
mine did and it just lowered my effective clock in any real benchmark i did
(my chip is overclocked actually)
arrowlake does see huge gains from OC tho which is cool
when i ship it to 9600x girl ill see if it has it then i guess
maybe the b650e-f is that bad
mkay
asus's initial boards havent really ever been spectacular idk
only because you have the archaic beta tester model
i think the ks is the opposite of that broski
5.4 allcore stock lawl what a noobish cpu
5.6 lol
my ks is quite the chip
5.6/4.3 is stock
+100mhz and its going crazy with power draw
for all core load
standard behavior
obiously it wont hit that cause of the power limit but in like, games
still waiting on the p14 pros
5.2 allcore and 5.5 2 core is very aggressive for golden cove
wednesday đ
i thought those got like straight up cancelled for now
snooze
i heard the lf3 pro buyers say that their p14 pros were gross
bad noise/weird mid ranged noise
well considering theyâre going in a corsair aio i donât really care
that is fire
my noise floor is high so i cant even hear my p12 pros at 75% signal rn
which is like 2400rpm or something
my ac is on eco mode so it just matters the ambient temp for my noise floor
sometimes theres an ac on and my pc can be as loud as it wants and sometimes theres nothing but my pc
fairs i had my fans at 1000rpm when my pc was on my desk in winter
but when it's below my desk and my AC is 5x louder it doesnt really matter
we need to find a high cfm box fan
i have a pretty kickass box fan and it didnt help
ram fans need to be directly ontop of the memory if youre using crappy stock heatspreaders
gotta keep in mind you need like exponentially more static pressure
look at the detail
the space between your dimms seems big but not for a box fan like a foot and a half away
need a arctic s12038-8k mounted directly ontop of bare dimms
i have just the thing
life is so good with nvidia studio driver 577.00
4500rpm not bad
hundred and fifty cfm
and i have 3 of them
thinkin what im thinkin? 360 aio fans alone drawing 33w
sadly i only have 3
theyre from dell workstations/just ancient machines (775 stuff)
i take them when i see them cause theyre genuinely performant fans that are good for dirty ram oc and vrm cooling help
like mt first one was from a dell optiplex 780
you know that shawtys wants him
You were saying đ
jorj will never
C9 gonna come back around before that happens
also that guys desk is very shallow
or it seems so
mid
C6 leaks by then, SO much better.. are you sure you should't wait?
no

enzo was starstruck
yeah we were talking about that earlier, dude is an idiot and those parts are fucked unless he gets really creative
had to be attention farming
nobody would melt butter on a gpu without it being a joke
Yep
I'm still confused
Why not use a plate
Just putting a stick on top is madness
I feel like it may have not even been wrapped
Or be a sane person and warm your butter with a V8
even if it was in the paper, once it melts its just liquid
musta smelled nice for a bit
Oh damn butter melts under 100 freedoms
pebkac
I shall do this with a plate and reply to the post on my findings
keep food away from computers, including peripherals!!
âŒïž
It would have prevented this
And a plate will get warm enough to pass the heat through to the butter
having a brain would also prevent this
I either leave it on the counter or place it on a plate and leave it near the fireplace (in the winter)
in a hurry? this handy invention called a microwave on low
or do neither and let room temp handle it
Also use the fireplace for proofing bread
Naw I'm quite patient
"I think I'll make cookies later today, I shall take some butter out now and go do other things for a while"
Yeah if I need it soft now, microwave
Although I don't bake anymore since I stopped having 3 day weekends
straight up
we should selectively take this guys genes and figure out how to make weaponized incompetence
idk whatever
as if tiktok and chatgpt aren't doing that for us already
6 channels of bdie might explode a memory controller
could you imagine floppa with a dominus extreme
iâm gonna buy d3 hardware
iâll have cool stuff youâll be nostalgic over
could be fun
i plan to buy a rampage for the cool sockets like 1366 and haswell (1150?)
i never remember the haswell socket
haswell-e or the noob version
desktop
Chip tester 
ok wtf is that
2011-3 is easy to remember
So nxp chips when they get tested before they sell to consumers they go thru that
haswell i donât cause it was 1 real gen and i never dailied it
and 4790k
several of each
then iâll sell the rejects as a lot
âlot of untested haswell cpus â
itâs just conveniently only unlocked ones
and if you look closely in the listing picture youâll see a z97 soc force
maybe even the ln2 version
peak

@shell void plz tell me what monitee
low res
ima big dawg
two hundred Jâs
Okadoka
Guilty you gonna be on BF6 later?
in probably an hour ya
Iâll be on later, going to chilis with the boys atm
hell yeah
Holy shit we had 1DPC back then?
I need to remove my extra dimm slots with some pliers
profit
(the reason why like turning off the dimm slots doesnt work is cause the traces are longer and picking up interference anyways from the empty slots)
(why am i saying this to you)
(you know this)
(maybe not the traces)
never been lol
i just know it is a hell yeah moment
a triple dipper calls to me
I'm fasting for 4 days so I can eat Korean Barbecue
i am dipping various donuts in chocolate milk
Huhhh

This is madness
Is this the new userbenchmark
looks like malarkey to me
Can I SLI my b580 and a750 and alchemist igpu
Oh so they announced ashes of the benchmark 2 and it doesn't have a benchmark in it
So sad
Hello linux my old friend I've come to suffer once againnm
Because a vision softly creeping
Left its seeds while I was sleeping
mozzarella sticks instead
And it comes with driver 550 but like not compatable for use case with a 5090
@edgy laurel what modes you playin
closed conquest
same
i saw there is a new king of the hill today
so scary lol
laughs in Engineer
no more c4 đ
yeah catch these 5 rpgs tho
i should try something other than Engineer
me when the ebay item i expected to arrive in a week will arrive next day because we have automobiles that travel at 70mph to carry packages now instead of horses
PTFO!
thats right
he knows
he knows of it but he aint know about it
smgs are so good, i'll play some assault now and see how the AR's feel
@edgy laurel I have had some pretty bad wall clipping issues
ha yeah once or twice i was in a wall
destroy the walls if theyre in your way
Can I change loadout while in game
my ebay item has been delayed twice because usps is using horse and no buggy to transport it
ah i can
theyre just hoping the horse gets there
mine is through UPS
tomahawk tomorrow surely
omg the stock AR walks all over the place with no attachments
its horrid
i added vert grip and 16.5" barrel
@edgy laurel @topaz veldt Iâm gonna hop on in 5-10 mins if you wanna queue up
I am packing, decided to go to beach tomorrow
yeah i'm down. i just discovered a new problem after 10 years, my left HD650 earcup is having connection issues
@edgy laurel why doesn'y my sig M18 shoot me in the leg randomly?
wiggling the cable or moving my head my left side is cutting in and out
maybe its defective
I specifically equipped the P320 to have accidental discharge
dude this is annoying. i'm not switching to the backup M40x's
:(*
Oh wow
maybe they can be repaired?
i just hope its the cable and not the internals of the connector
most likely the cable
detachable cable
I'm watching the moca video
And How would you hook up a Wi-Fi router? That's powered through coax
got another?
a cable? naa, never did replace the stocker
time to go shopping i guess
always wanted something nice and braided
Welp, that went off into such a tangent of a product placement.
And yes, I just came from trying to watch a WAN Show for once.
ok thank god it is the cable. swapped right side cable to the left earcup and its fine
Now I'm reminded why I don't watch them: they get kinda boring fast and the chat is soooo distracted by literally everything else.
if i just don't move my head.. its ok...
That sounds oddly familiar of an experience.
My old cans ended up being like that, where I had to somehow stay perfectly still or either side will cut in and out and make unwanted noises.
alright whos got nice headphone cable companies
the immortal hd650s will live to see another 10 years at least
if it was a problem in the earcup itself I would have cried, they've been so reliable
I like my 560S'
My HD 400 Pros meanwhile are holding out better than my previous stuff so far.
Iâm at the beach today
nice!
Good choice
i feel like someone here posted a link to one somewhere at some point
some bespoke custom length audio cable company
or maybe it was a louis rossman
Bespoke audio cable company?
It usually means... Unique.
@edgy laurel I use hartaudio
u customize like all of it
To that brand or such.
Hart Audio is nice - modular
Bingo.
yeah someone linked a site that lets u order specific lengths n terminations of audio cables at some point but i think it was louis rossmann not here
Hmm.

Ok 5070 ti officially coming friday, with all my other gadgets and doohickeys also coming around the same time
gonna be christmas next week
lucky kid
yes and that kid is me
Installed the tv yet?
Sunday đ
Sending out one of my lackeys (roommate) to get a TV stand tomorrow
All I wanna do is watch Blade Runner 2049
Yes I am very lucky to be in a very fortunate position I will not deny that
had to suffer the first year of college on a 3050 ti mobile :(
5nail did you see all the garbage I bought?
hi chat
not sure
ow
im starting college and I got a 5070ti laptop
i am dumbass
we need more squad members
Getting all this, plus in a few weeks Jonsbo N5 + new HDDs
does it make sense to undervolt ur gpu and then overclock the core clock
that wud just start causing stuttering again
I didn't have to get the Anandas, but I like the look + I want some planars
JDS labs mentioned 
I like big knobs and I can not lie?
Hammer lake lmao
my source is that I made it the fuck up, every single MLID video
maybe this will cause jaykihn to post again on twitter
squaaaddd
Also michael, the gaming trio will be a good fit for my PA602, 338mm of GPU goodness
Oh should I fire up battlefield
she do be long
I approve - if they are even close to my Arya Stealth you'll love them
just joined
fuego
the 5070ti is gonna go hard

and crash lol
we're in a match
how's bf6 so far?
oooo
so one of ma papas best friends also did own the same 97 model that i want, the only issue he said is that the transitions were like no covers on them so he had to replace, other than that he said that was golden, he said his friends had one and lasted 300k+
ig premium gas is also a thing to consider but its ok
MSI made good cards this gen
They probably skipped making AMD cards in exchange for a bigger Blackwell allotment đ
@turbid locust went back to lobby
hammer lake 
ah lol
@turbid locust i queue, i can't seem to talk when i'm just at the lobby screen for whatever reason
lol awesome
oi fuck me
it lies
it takes like 30 seconds
it did lie
I was just fucking around for a few
Wait did you guys pre order?
Or just have access to the beta already
I dont have access to the beta yet and refuse to buy it until I try it lol
I pre ordered
nah just a code
I did an alpha test and got in
i watched twitch for 10 seconds
anyone know if "Arduinocelentano " has released the software for this??
Still playing?
yeah mac and i are
I get frustrated lol
SUPPORT THE BLACK MARKET GPU MOVIE: https://store.gamersnexus.net/black-market-gpu-backers
This is our biggest investigation yet, diving into the industry of black market NVIDIA AI GPUs and speaking with the smugglers, distributors, suppliers, middlemen, users, and innovative repair shops. There is an entire market within China for GPUs that fal...
found it! its called "cdimage"
bet
kill me
that bad eh? lol
and then some
also guilty that steam recording thing doesnt work well for me
When I try to copy a clip it fails to export lol
i've seen that failure before for longer clips but they still seem to copy
i haven't messed with it in a few months though
i just remember the functionality was pretty neat with all the control you have
Either way all my clips in this game are super oversaturated and just look bad
also setup the steam stats overlay on a hotkey for when Nvidia fails
Quite frankly I dont even wanna clip if they look like this lol
Yeah yours look normal
in Documents\Battlefield 6 Open Beta\settings there is a file called PROFSAVE_profile
I just edited the line
GstRender.DisplayMappingHdr10PeakLuma 800.000000
Some of mine look normal but most look suuuuuuper oversaturated
defaulted to 1000
ah
the alpha had HDR settings in game, but this beta doesn't for some reason
screenshotting that is a bitch so out comes the camera
Windows isnt playing back my clips for whatever reason
media player?
but you can also just use another player.
i'm using MPC-HC for most things now


