#tech-chat-1
1 messages · Page 1513 of 1
just .2 makes it that much worse?
it was causing bsods, errors with my ram oc
How can a company take something so usable. So functional
and put electron on it
SKYPE WAS FINE
JUST MAKE THAT BETTER
The outcry for native apps is justified
found it less distracting personally than other social media
@steel umbra
I don't understand why ppl hate denuovo or whatever it's called so much
Dont question why my 11 pro has 2 separate batteries
Most of the time it don't effect performance that much
Unless your one of those who's just trying to pirate the game
fon
because it's technically malware
it can cause fps drops
Recently shifted to solar energy. This is my setup, this is what it shows. PV is greater than output, does that mean solar energy is covering everything already?
you should probably check the user manual for that specific device
Hello,
I have crackling pops sound issue on my system, any ideas as to why?
Rtx 5080 out putting in hdmi into a denon avr x3700h outputting in rca into a 3E audio acting only as a power amplifier for the front speakers or directly to the speakers for the rest
And the denon also outputs to two subs
The speakers are 2x focal aria 948, 2x aria 906, 1x aria cc900, 1x focal sub1000f, 1x arendal 1961 1S
Any tips on why I would have crackling audio?
Not 100% sure, but I've had pops/buzzing when using the GPU audio output before. HDMI sends audio digitally, so the screen's DAC is what actually makes the audio signal, and the screen DAC is usually powered off the screen's PSU, which (if badly made) can fluctuate depending on framerate/vsync/vrr/etc
It's not a screen that has the dac, it's a 1300€ denon avr
And it got measured and had a good dac
But yeah maybe it's still the gpu
I need to check if I have an optical out and cable or smth
TOSlink is ideal, yeah. And it's a bit of a crime to feed such a nice AVC off of motherboard audio, but it's worth a try just to see if it helps.
It's not the motherboard audio since I use the hdmi output of the gpu for audio
Oh wait, I didn't understand the sentence sorry
Yeah I have to try that
I really hope it's not a hardware issue from the audio gear
It's amd
i am thinking about getting a 5060 8 gb to go with my ryzen 5 9600x
is this a good idea or should i get a different gpu
lazy
what res, what games do you play and at what quality, what other things outside of gaming do you do and so on
i can also say, WOOOOOW igpus have become so dam good and upscaling is one of the nicest things
a 2 year old igpu giving playable framerates while the game still looks amazing, all while the framegen output still needs to display out on a 3440X1440
tho for some strange reason framegen in this game seems to have some kinda issue with input latency or something
it just makes me want a panther lake even more to see what it can do
Dude what kinda fire ass name is that man
m yes tech chat
M yess
amazing
the magic being shared GPU memory? AMD has been doing that since at least 2011 afaik, the main thing that makes that iGPU fast is the fact it has stupid fast DDR5-8733
Don't get an 8gb gpu
no i mean the whole games not knowing that so they have to FORCE a certain amount of vram on the igpu that cant be used by the cpu
and yes i already had a argument about that shit
If you can get the 5060ti 16gb version but if you can't it's okay, 5070 is also 12gb
9060xt is also a 16gb model that's cheaper than the 5060ti and pretty good
people think unified memory is a apple only thing or whatever
anything with a igpu has it
Hi
but the way memory managment software level is different is what makes apple different, almost like making a OS around your own self made chips comes with benefits over stuff having to deal with many many many years of backwards compatibility
and even then apple has some amazing translation layers
Can someone help me chain my fans together
more info needed
My new fan has
1x sata
1x 2 pin connector
1x 2 pin socket
1x 4 pin socket
I have 3 fans already in my case 1 exhaust 2 intake
I'm trying to link them together so the rgb syncs
My existing fan has the same but only 1 existing fan has the same connector rest 2 have only 4 pin connector which goes into the 4 pin socket
These are all the connectors my new singular fan came with
1 existing fan also has these which Is already connected and running
if i say windows 11 is efficient enough as it is, more efficient than macOS....
Hey can someone help me with my windows installation issue 🥹🙏🙏
I could maybe
Wat is the problem
Can we do it in the dms
I dont rlly wanna flood the chat with messages
You can though
It's tc-1 and the channel isn't very active
rn
So basically I had a processor and I decided to swap the gpu + cpu + ram into a new case cooler and nvme m.2 ssd
And i followed linus' tutorial on how to setup windows 11
And i downloaded the windows installer on a usb stick
And started the upgraded pc and and spammed f8 and booted from the usb stick and did the installation process
And i don't rlly know what happened but it seemed like it succeeded in installing the windows and it restarted itself multiple times
With the asus (motherboard) logo and at the final restart
The mouse keyboard and monitor isn't receiving anything
And the power button on the processor is blinking with gpu, fans etc working completely fine
And its been like that hours
Note: after moving the components to a new case and motherboard it still had its old ssd (it was outdated and short so I couldn't screw it in and it kept hanging there) and I could boot normally and play games normally but then there was a windows update and I updated it and I think it corrupted my old ssd windows when it turned off accidentally
Check that there is no loose screw floating around the case, or motherboard screw not tight, maybe give the case a gentle shake. Then try reinstall windows from your usb key.
siege all the way bad performance
what gpu do you have now
windows found a ps1 script on my laptop, who can i send it to for them to tell me what is does
full system specs
gigabyte b650 motherboard and ryzen 5 9600x is all i have so far
no
yes
that is the new pc im building
not what i was asking
ryzen 5500 3050
there we go, how much budge do you have planned out for the new pc
DO NOT budget like that
prices change constanly
how much do you plan to spend for the entire new pc
the ram alone will be like 200-400$
nah ik thast
if you go am5
i got my cpu for 100$ case for 50$ motherboard for 160
im not worrying about total im just buying stuff i need to build it
wat, motherboard for 160
even here in Norway you can get a good b650 for 140$ brand new
DO NOT buy part for part
and why not
prices change and you waste money for parts that lose their value and become worse that you cant even use
well they do not become worse but rather the average goes up
not really a true waste but just bad managment of money, could rather i dono invest it or just have some spare change in case anything happens
I see 3080 ti for 350
wtf
Cup of butter
discord is so broken
Fork found in kitchen
very insane reach but is there anyone here who is/knows someone who has a first authored paper on arxiv in CS?
Play roblox
how is this thing using so much fucking VRAM
(almost maxed out)
(and yet again 60FPS)
well
(below the min reqs and without framegen)
there is a reason why people are freaking out about vram
also it looks like you are over maxed out
am I?
it has some amount of headroom just in case
its there for you to use why not use it
tbh it more so looks like you have vsync or smn on
eh could also just be the game locking itself to those 8GB
many things i still have more to learn
RE Engine
and ofc without V-Sync it jumps to over 100 FPS
xd
where the fuck are they getting these numbers out of
one thing i do have to say, wow the lowest settings on certain games still look unreal
(since I have it on max everything that the game allows without FSR and it's at 60FPS with vsync)
you might have optimized it a bit more here and there while they might have gone for the lowest fps on maybe a demanding erea
also why does FSR basically change nothing
what quality setting
how the fuck is blocking screenshots
(Win+Shift+S does nothing)
(print screen worked)
at least in directive 8020 it got native xess 3 and WOW its stunning i can run at ultra performance and hard to notice any defects on anything but moving objects and even then its not the worst
oh jebus yea 9GB
turned it off (since it does literally nothing)
in-game FPS
ok
@tidal geyser wanna hear a joke
o no
do i have any chance to get my data back
press F1
People really need to read things properly
you guys reckon the price of the pc components will ever go back to pre price hike?
one of the sections of the drive im not able to get the data back
then go into Boot Manager and pick Windows Boot Manager (or if you are on Linux then UEFI OS) and then backup whatever the fuck you have on that drive
well its backed up just take from there
it isnt
then its not important
Bro what is that camera
anyways high chance the ssd is in read only mode
you should either borrow a computer or install windows on another drive in that pc boot into it recover what yo can and back it up to a offsite NAS or the cloud
i just want to drive it home that if you have stuff you care about then make sure its in a safe place
your ssd can always fail, your hand could always slip and so on
criminal speaker placement
Hi I need help finding the right authenticator app Microsoft uses on PC I think I used the wrong one can anyone help please
All that aesthetic stuff yet has messy things
I dont like the white minimalism bs it feels empty and unnatural and most of the time its not done right
Also its hard to maintain properly
Hmm
my case is only available in black and it also doesn't matter because I am vehemently anti-windowed side panel
my side panel is away from me
tbh if a case isn't going to use a windowed side panel it should at least have some ventilation in it, that's my major gripe with my current one
excellent front ventilation though
This rat never had a father, ig he is a rat bastard 😔
for reference, this is my current case
https://www.silverstonetek.com/en/product/info/computer-chassis/FARA_513/
ripped out the stock fan and replaced it with a noctua + added two noctua 140's in the front
i already bought a 360mm rad before getting my case i kinda put myself in a shit situation
peerless assassin 120 time
it's enough for a 9950X3D, it's enough for whatever processor you're running
Pls anyone help
nice case, too much glass for my liking
it is but then what about my lf3
what about it?
i cant just let it rot in a closet
what's stopping you?
peerless assassin 120 is 35 bucks and cools anything
well doesnt matter i already have my lf3
yeah fair
i put a peerless assassin in my server i've been happy with it
i paid 150 for my galahad 2 and tho performant it has a loud pump
air cooler gang
i only bought it because i wanted to try something new :(
Yo same
fair - i got it because it was the only case available at the time large enough for my LF3 that looked half decent
which ive realised doesnt matter because its on the floor anyway i dont look at the darn thing
yeah that's valid, I tried to return to CLC's and everything was way too fiddly for my liking but that could have been down to my choice of fans at the time and my inability to tune a good fan curve
its deadass plug and play my server makes 0 noise
its also hella big tho
Yeah and its pretty good at cooling too
you can get around not tuning a fan curve though by just shoving noctuas everywhere which is what I ended up doing
i dont tune my fans i just put them in and hope for the best
Same
my air purifier makes more noise
I only did a fan curve with my ippc industrial noctua fans bc they are loud as shit
lol my air purifiers are those cleanairkits ones that use PC fans
Same lol
I was looking at a pile of random fans I had been holding onto for years and it was the only way I could figure out how to use them
anyways, computers
i think i need an air purifier ngl
colin are you the guy with the 4070TiS
sure am
aite i have shit memory remembering peeps
all good lol
hell nah LOL
they work incredibly well actually
the nice thing is that when the filter dies I can just go 5 minutes down the road to the hardware store and pick up more
Good lord I’m excited
just not recommended if you have pets/kids running around because the filter is way too easy for a cat to sink their claws into
Oh I want a cat
And not a penguin?
Is this an electronic waste?
Why would I want a replica of myself in my room that’s kind of weird
Nah not a replica, just a brother innit
Penguin bro
probably an ewaste a decade ago /s (but it all depends on what is inside)
Exactly like this
I don’t want a brother I want a cat
I want a penguin
my pihole is running off of a very discontinued NAS box that can only write to SD cards so basically any amount of post-486 computing power is still useful for something
on other side you can literally get Sandy/Ivy bridge/Haswell hardware for next to free, so no point in bothering with Core 2 Duo era hardware
you do NOT
the only thing better than "next to free" is actually free, so if you're given it for free then more power to you
Yes I do
@native path this FUCKER here who sleeps soundly PISSES the shit out of my motorcycle
My dog shits and pees everywhere anyway
yes but they pee on the floor or on some vertical surfaces if they're male
cats will spray their pee
they pee on places you didn't think were possible in the animal kingdom
I know I want a cat 😭
female cats are nice tho if neutered they can live for decades
but you need to buy them food for neutered cats or they'll suffer
god bless micro center, I don't need any of this but it's nice that they're still offering reasonably priced bundles
that's cheap as dirt
yeah that's really good in this market
in my country Argentina just the 7800x3d goes for 500-600 usd
200 bucks for ram though 
I know but I am still in disbelief that memory is as expensive as it is
I also saw a prebuilt pc with 270k plus, 5090, 2tb storage and 32gb of ram for £3.7k, the 5090 alone costs 3.2k lmao
a 32gb ddr5 trident something kit in my country goes for well over 700 usd
Sad times
I'm fine with my 16gh ddr4 2666 crucial
it does what it needs to do just fine
my A2000 runs good for the games i need to play
like, it can run Subnautica 2 at medium settings with 50 fps
i think game's not that optimized though
6gb of vram sucks but oh well
you can still make 6gb of vram work and devs that demand 12 should be publicly shamed
I have two cats not an issue just get rid of their balls
I did not know that I buy Felix but I plan on switching to something not nestle
But that’s a next month problem
damn this upgraded train station looks CLEAN
needs a 20 lane highway right there
both dram manufacturers and ram stick manufacturers take a lot larger margins
time to change laptop's thermal paste? constantly whining and idle temps over 50C
can't hurt, replace it with PTM
well you are using a avg of 6.4w
load temps?
I know Forza Horizon 6 is still not fully released to the whole world but does anyone know how well a 9070 xt paired with a 7800X3D would run the game?
100% hits 92C, cores 89-90C
fan giving it all
max cpu power was 19W during 100% load
tough dunno is 3dmark's cpu profile a good benchmark
prime95 will bring any cpu cooler to its knees but I think that might be too much for your little laptop
as is, I think a repaste would do you well, and you could also replace the thermal pads with putty
ordered PTS from local supplier
tough they're out of stock, but new shipment of 100 should be within 2 weeks
ptm helps a lot with laptop chips
usually i just dont bother with pads
only worth it with like gddr6x or if its realllly bad
well I have liquid metal but I have been constantly been advised not to use with chips that do not have heatspreader 😄
tbh I just flat out do not recommend liquid metal anymore
I do have liquid metal under the lid on my old 8700k but I delidded that thing like a decade ago when I applied it
that was the last gen to use paste right
if not that then close to it
that cpu just runs my NAS/plex server these days
little overkill but whatever
I'd be interested in upgrading that platform to something else because I am running into PCI lane limitations but it's not a big enough deal for me to mess with atm
it just tends to spill at application or when you mount the cooler, over time
it also tends to corrode a lot of things
none of these are pretty much an issue with pastes
yeah but I've seen so many horror stories of factory liquid metal on GPUs and laptops leaking out and frying everything
just don’t put paste where the socket is and you’ll be fine
I have PTM on my GPU and stock thermalright paste on my CPU (which seems to be working fine) so I have no reason to mess with it right now, but if I ever have to pull of my CPU cooler I'll probably put PTM on that as well
maximum overdrive
the liquid metal in my 8700k has been stable for like a decade now but I'd probably not buy it again
i’d not disassemble it and look for what it has corroded meanwhile
only reason I did it that time was because there was a measurable 10-15 degree drop with a delid at the time
if it works it works
temps are still fine on the 8700k
which software do you use to log temps
that's just TrueNAS
interesting
even when you zoom out to a month it's fine
those little spikes are probably when stuff was getting written
I'm also using that pink thermal grizzly stuff on it because i have no intention of actually doing any maintenance to it besides cleaning out dust when I actually power it down once a year
personally i use hwinfo to log
not only you can check sensor info but you can log it directly through hwinfo into a .csv file
hwinfo isn't available on truenas scale but it also doesn't matter, my nas is less of a computer and more of an appliance
I pay about as much attention to my NAS's health as I do my refrigerator or dishwasher
clean out the dust once a year and then throw it right back into service
i wish manufacturers would pay more mind to lifespan of appliances
yeah but then they can't sell you new ones
instead of AI slop for example
well, then they themselves get sold worse quality appliances, machinery, etc. if you use this logic
agaisn’t them
oh no the industrial stuff is miles better than consumer grade
it's also 10 times more expensive
i meant the logic
i sell you a device that lasts a limited amount of time, so why should you sell me devices that last long? when you can do the same
You can buy a Maytag washing machine for 800 bucks and it will do the job just fine but your local hotel will be using a Speed Queen to wash hundreds of pounds of bedding a week and that machine will cost $8000
nobody here is selling products to manufacturers
manufacturers are people in the end
which have their own requirements
despite the citizens united verdict corporations are actually not people
doing planned obscolecence or products with short lifespan due to ignorance fuels fake economy instead of anything positive
it does do a positive thing and that is to make the balance sheet look better and if you think these companies care about anything else I have oceanfront property in montana to sell you
liike is it that hard to produce reliable drums, simple electronics instead of as much of digital stuff as possible and apply a thin layer of hydrophobic coating?
it's the philosophy of designing stuff to a budget instead of a purpose
"we want to sell this prospective new product for $800, where can we cut corners to get the cost down to $600 (or whatever) so we can make $200 on each sale?"
wy my ram filled
coating costs few cents to spray on
but let’s say the process costs $5 in the upper range for some reason
versus on the commercial/B2B side they are more concerned with increasing the reliability of the product so they don't get hit with warranty claims by the businesses they're each selling hundreds of units to
lose one consumer who might buy your product? drop in the bucket
lose one business who buys a thousand every year for hundreds of thousands of dollars? there goes a quarter of your company's revenue
Why are you asking us?
because idk wy
No one here is at ur pc
maybe virus
Then look for one, check task manager and see whats running
yeah but even when you increase price tag to $1000 and manufacturing & transportation, etc. cost to $750 they still tend to put that extra money into more features instead of reliability
eh the usual'
windows is running
well, it’s not exactly one customer when your washing machines consistently die with regular usage after warranty
because unfortunately planned obsolesce is what they want :/
Wdym "the usual" thats unhelpful
and that's why I'll never buy a samsung washing machine, good thing they don't have dozens of other industries to prop up their sales if they slump
edge
virtualbox
roblox
vsc
How much ram is being used by virtualbox?
i’ll never buy anything samsung expect panels
like 20 gb
Bruh
the last drop was when my a52s touch screen died almost right after warranty
You have 24gb of ram
and the battery has degraded a lot
hey i think i had one of those
yeah my battery degraded like crazy iirc
i need more ram
@worn willow
Well duh, dont run a vm with 20gb lol
Use dynamic allocation
yeah and the batteries tend to go really bad if you don’t use your phone for a longer time
anyways yeah corporations only care about how much money they make, any notion of a better product is a result of competition in the space they operate in or laws that prohibit them from selling junk advertised as gold
turn into spicy pillows if you don’t use your phone for 2+ years
tats a thing?
Give it the ability to use up to how ever much you need but with dynamic allocation, it wont use/set aside that ram
Yes
i never had a spicy pillow issue
gold is lame it’s diamond+ pro max ultra++*
Bc it can be useing like 3gb of ram but if you gave it 20gb, it will say its using the full 20gb
Just some advice please
Would this fit in a montech 95 king pro
check video from mrwhosetheboss and from other yters
i dont use sumsan
But hey thanks... I remember people recommending indium heat springs like a decade ago 😄
LM technically has the best thermal conductivity but the juice isn't worth the squeeze when PTM is available and only performs like 20% worse (versus regular thermal paste which is somewhere to the tune of 80% worse)
LM made sense when we were delidding to get 20 degrees back, it's kinda dumb these days
it depends on what you apply lm on, lm is a ton more thermally conductive / less thermally resistant
could be up to 5x better
have fun bricking potentially multiple components in your system with today's hardware prices
how tf does an igpu artifact
if you apply lm on something like 7800x3d w ihs (you don’t do that), i doubt you would notice bigger than a 2-5c difference
just like that, looks like
interestingly enough before it just didnt give me a video out
the ihs is just way too thick, the die is too dense and you have the cache on top of the die
remove ihs entirely
but if you have a specific extreme high performance scenario, it could be up to 5x better
not sure if such scenario exists though
i prefer when it corrodes xdd /s
delicious nickel tarnished by le evil lm
btw unlike zinc corrosion or copper oxide, nickel oxide or other forms of nickel corrosion are poor conductors of heat
the amount of damage lm does over time isn’t that much but it could be notiable especially on nickel
I haven't removed my delidded 8700k from its socket since I installed it and I have no intention to at this point, if it dies it dies, but it's been going for a decade now and I don't think it's going to go anytime soon
if anything it might be the mobo that goes in that system but even then, it's a ROG Maximus X Hero which is a pretty solid motherboard
hi https
helo
also on the topic of copper oxide
totally never sent this before
i just dont know what to do with this
feed it to wildlife maybe
nothing
you can easily clean it off though it’s not recommended
no mounts + trash cooler
you’ll exhaust the copper and it’ll corrode faster over time
is that why they have those stickers
anyways if you want to remove it regardless, vinegar + salt
it works like magic
but you have to thoroughly and i mean thoroughly wipe it off
ngl, with how cheap a decent single tower is now.... just buy a new one mate
literally as soon as you drop the solution the corroded copper tends to instantly turn into brand new looking coppah
peerless assassin 120 is 35 bucks
cheap, cools anything
How did it only oxydize in that spot
Looks kinda like mold
bad paste ig
some sort of contamination I'm thinking
not a single tower, they might've bought a single tower before for a reason and besides, it may be just overkill af
not to say it's a bad cooler at all, just may not be what they need
Assassin X 120 is $16
4 heatpipe 120mm tower coolers can be found for $10 on places like aliexpress
you gotta replace the fan though
but for some the stock fan’s going to be acceptable ig
they’re just dc
ow can i take pic of my cursor
speaking of which, kinda want to replace the shitty fractal DC fans my other PC has 😔
are the thermalright tl-c14 any good?
been just looking for something decently quiet and PWM that's cheap
i also had shite fractal fans in a define c 😔
not expecting like noctua levels of performance, just anything better than what i currently have
though in fairness to the shit fans.... they're not too loud actually
probably not, i suggest looking for sound captures on youtube or by reviewers
thermalright has good stuff expect fan bearings
argh
they tend to be a miss most of the time
cheap though 😔
sort of the nidec gentle typhoon fan noise at low rpms
turn it into a golem
i guess you get what you pay for
tbh i feel like every fan that i've owned that's not the a12x25 has disappointed me
same lol
a12x25 bearing supermacy
i was considering the silent wing 4 140mm but i also don't want to pay $40 cad per fan again
yeah they're so expensive but like everything that's not it is just so shit on god
those have resonance issues
🥀
i was highly disappointed by them
be quiet doesn’t even know what they sell because they misadvertised the minimum rpm for the bq sw 4 hs 120mms
“great fans”
i know those are the fans on the new nh d15 but uh.... $113 for two fans is a bit much for me :^)
and not in a "4090 for 200 dollars dont need it anymore dumb"
but "i will ship this motherboard, cpu and cooler across the country in a plastic shopping bag"
looked unused just with no mounts
.
like why
bruh
i kinda dont want another pair of arctic fans either so now im stuck
OH i just remembered
@verbal prawn you don't have p12 pros
it was the p12 max that i bought
fuck the max
i mean they are very high static pressure but they're annoying as FUCK
yes
i used to not care but not anymore
same experience
never again
ticking issues at low rpm
are the p14 pros alright?
fair enough
i might just get a pack of them cause if they're closer to like, the p12 pst which i remember buying and them being alright, it's decent for $75 cad for 5
oh yeah i remember someone here mentioning them ticking at low rpms too
sadly nou
bro imma just pay for the noctuas at this rate
actually have you had any of the redux fans?
maybe check fans from other brands?
ive had a phanteks t30 sit in my drawer for the past 4 months
it yearns to go somewhere
i’ve had like 1 i don’t even remember which model it was, wasn’t a fan of it
argh
yeah i'll have to look into it, but ngl everything just seems so disappointing lol
i might have to look as well because i haven’t been really active lately with fans, at least as i used to be
noctuas are the pay to win solution to your fan problem forever but that doesn't mean they're great value
well, if you want the best bearing i can’t think of anything better or equivalent
hey, I say all that as a guy that runs noctuas wherever possible
i mean if your fans last a long time (noctuas do last) maybe a worthwhile investment for $30/fan
idk
i also try to not buy them bc it’s $30 and psus don’t need $30 fans
the only non-noctua fans in my build are on my processor because I'm not paying 4 times the price for a noctua tower cooler that might be 5% better under very specific circumstances over a peerless assassin 120
i’m also not buying noctua coolers
I think my GPU's fans might be louder than my CPU's fans anyways
i got cursor
Iv ran p12s for 5 years and its been awesome
i usually buy heatsinks by heatpipe count, thickness, fin density and size
I usually buy heatsinks by how much sink they can heat
and ofc mounting as well
:
hhdd[[[|[£
frogored to mentjon price $$
Guys is it safe to use a gen 4 nvme ssd on a gen 3 motherboard?
yeah it'll just run at gen3 speeds
that's not a noctua cooler or fan
took you record 5-10 seconds
yeah i experiment with these cheapo coolors
Would it show any errors when im tryna boot from that ssd after downloading windows from a usb ? I did it and booted from that ssd but it did the restarts and now it's still running with the mouse n keyboard off
I never installed windows
This my first time
it would be the case if the ssd itself was defective
or motherboard
Both brand new
yeah considering what you described before your installation should’ve worked
Should I just let it do it's thing for a couple more minutes? I don't rlly know how long it takes to do em
😭 ✌️
which will fix your pc
yeah the lack of noctua branding was the dead giveaway but also the injection molding on the fan looks worse than I've seen with any of the fans I have, plus the blades themselves don't have the indentations in them that you'd see on an actual noctua
it's like they just took the 80mm noctua and scaled it up
it does look like a $10 cooler
the fins are flimsy as well
you can literally remove them
so cheap they didn’t even… it’s just too cheap to explain
Should I just let it keep running until it fixes itself or could it be an issue w stalling or hanging
i don’t think it’ll fix itself but you son’t lose anything in the process right
well maybe time
Wdym i wont lose anything in the process
@solid spear you tried to install another windows installation media on a different flash drive?
on second thought I might swap in a NH-U12A for my peerless assassin 120 just so everything can match but it's going to be a tight fit in my case
time
It's late for me so I don't mind having it run all night lol
put the fan from u12a on peerless assasin
I don't think it's the usb
I used my very precious 512tb usb it's like so stable
idkkdkdkd then
@solid spear when's the last time you updated your BIOS?
Wdym by update
I think I found the problem
Can u clarify
you can flash your motherboard and upgrade version
but you said it worked before or?
It worked completely normally before
can't hurt
ther a smool chance you can brick le bios
Like i had a diff ssd in without a m2 screw in and i could play vid games etc then there was a Microsoft update and when it restarted it was repairing windows and it got corrupted so I had to clean install but then I decided to use a diff ssd that's mountable so I js got a different ssd card and I also resented the bios by pullin out da cmos battery and ye
That's basically the whole thing
i don’t think flashing bios would fix the issue but anything is possible soo idk
most recent windows build might not play nice with the bios/hardware configuration
Alr
just if you do flash be careful
damn bro got a 512tb usb
if you brick your motherboard and it has no way of reverting it like bios flash back
I meant gb chill
you’ll have one less motherboard potentially forever
Yo wait so
What do u exactly get to flash it
you must be rich gib me 32tb now
there are guides on youtube
similar to windows installation
you install it on a flash drive
and put into motherboard i/o in the manual where it says flashing supported
sometimes your mb doesn’t have it indicated, in that case plug it anywhere on your mb’s i/o
@steel umbra huh it turns out the p12 max we bought might've had double ball bearings instead of fluid dynamic bearings
both have ticking issues
🥀
Ur engine be ticking
i’m ruining your dream sorre
i poured diesel into gasoline
turned your 50km/h vehicle into 0km/h
ajajaja
i have a p12 max white fdb and it also started leaking a bit of lubricant
well it stopped it seems
but it did leak some lightly tinted yellow lube
idk how that happens
btw there is no p12 max dbb white
Lets goooooooo
whaataaaaaat
0km/h bc you're instantly there
wanted to get a 9a until i realized my 7a has a larger sensor
[Goes into politics for no reason]
🚨🚨🚨🚨🚨🚨 banned, mods ban, eliminate, terminate, mute. explode
to give them some credit from reviewers, they do perform well db/celsius cooled
although imo the best thing is measuring frequencies with a sensitive mic for that purpose at a set % to get a more normalized audio recording
to get the fuller picture
although mics that properly pick up those noises tend to be expensive
and not everyone has a sound chamber
so i’d not rely only on db/c
does anyone like the asthetic of the founder edition cards much better than the other variants
I installed warzone and it said I needed bios firmware update so I updated my bios to latest version but now when I started warzone again it again told me to update my bios
Is there a fix for this?
Yeah try googling it and see what it says
Just always try Google first, there's going to be a fix most likely or a random Reddit post
https://www.amazon.com/gp/aw/d/B0D9F1Z8KB/
I'm looking at racks anyone got recommendations? Any brands or better way of finding something I can somewhat reasonably put on a truck, take to an event, and such
I ultimately need 2 racks that are 34U or taller, they ideally are kinda shallow during transport so I can easily get through doorways etc as needed, the associated other supplies are all living in https://www.therestaurantstore.com/items/199449
you should be looking at AV racks, they are often mobile
Note security isn't a concern for the racks
They're holding cheap displays and BNC connectors so odds of someone wanting them is low
if its just patch pannel shit you can actualy mount it on both sides of rack
16 of these is what I'm transporting
8 per rack.
4u each
Add another couple U for a BNC patch panel and a power supply
Each is 12v 1.5A or whatever.
So a 12v 20a CCTV power supply which is only 1U should more than handle a rack of 8
this is all equipment that is really shallow right
Yep that's why the thing I linked is only 15in deep
Which is still overkill. I need probably like 8in really other than the power supply
tbh i would fabricate some shit that folds on itself
Not sure what you mean
I did consider fabbing something but that takes time and I sadly don't have tons of fab time available these days
And it's not something I can easily hire someone to fab for under a couple grand probably
two of these, hinge on the base and top
folded it would have this equipment on both sides of rack, unfolded it would be like two racks side to side
True. Main concern with the 2 post stuff is I figure they're tippy
And not sure about attaching wheels
genesis aio opinion?
Why aio $30 dual tower better
yeah but you see, everyone talks about price which is different in my case
visuals, also i have a 15$ voucher for a genesis product i got today
well its not just visuals
But longevity of air-cooler outweighs the $15 voucher
my vrms overheat, and instead of buying 3 fans, i can just buy an aio
i alr have an aircooler just incase
aio wont improve vrm temps
arctic 7x
i installed a single very loud fan on top (2008 lcd fan), and it cooled them down a bit
like from thermal throtling at 4ghz to letting me use 4.4ghz on the i5
Aios don't blow air over vrms unlike tower coolers
That's why artic added a fan on their aio
??
The Genesis aio have a fan over the CPU block?
A lot of the air gets stolen from the top right fan, rear fan and the GPU moves it around and sends up it's hot Air
Ignore the bottom horrible corsair air-cooler, but the air-coolers have better vrm temperatures over liquid coolers that didn't have a dedicated vrm fan on the CPU block
stupid idea: a motherboard with a bajillion fan headers, and you select the fan profile by just choosing which header you want 🤣
well, having the physical range to choose from is still helpful
especially considering routing of wires, etc may m ake some locations better
I've looked this up on the internet, but I bought a Dell laptop a couple days ago that hasn't been used in a few years and as such is quite behind on windows updates
I don't want to connect it to my home wifi because it hasn't been updated in a long time
how would I update it without internet?
it seems to involve a USB drive and microsoft downloads but it isn't making sense
wow my facebook marketplace smurf account has (estonian) ebay built in
i assume you mean factory reseting here?
like just download windows 11 installation media on your main pc, make a bootable usb and then format and download windows
not a detailed guide by me but you get the idea
Crimson Dawn is one hell of a test for this gpu
I’ve never seen my shit struggle like this
DLAA + Ray reconstruction and max everything in 4k
Had to turn fake frames on to get over 140 fps
Still not even there really
Yea. Shit got me side eyeing my 12vhpwr every 2 mins
600watt gpu/space heater combo just in time for summer
Win 10 BTW
Picked this box for $50 at the flee market! It's an RX 5600xt 6g.
My son has GTX 1080 right now, will that be an upgrade?
So I just reinstall windows? I already factory reset it cause I didn't need any of the old owner's info
I'm just worried that if I reinstall windows I'll need to activate it
and I don't have the key
people have said that I won't need the key cause it's built into the motherboard, but I don't know if the laptop has that cause it's an older model (Dell Latitude D530)
In newer titles /game engines the 5600xt should be faster
It's really title dependent in world of tanks at 1440p the 1080 was much better
probably not but a certain powershell script can fix that anyway
with rufus you can install win 11 if its too old to meet the requirements
oh
well i mean why wouldnt you just update it and use it if you want win 10
unless you open weird stuff you'll be fine
my grandma is using a win 7 pc and that pc is fine
if you install a new windows 10 installation it won't be updated out of the box anyway
Asus 2026 new laptop prices are kinda apple.
the 16" here costs 6470eur. that's way more than what my macbook pro 16 max costed. 
So I can connect it to my wifi?
I was worried about it getting infected cause it was last used in 2016
What version of Windows did the laptop originally ship with?
it has a Vista sticker and Vista key on the bottom
Non arm based laptops are stinky but arm based windows laptops are stinkiest
But it was upgraded to Windows 7 / 8 / 10 over the years through natural updates? You can also just check the activation screen in the Settings app.
This is on Windows 11, so you'll have to find where it is on Windows 10. Should be in a similar place.
well I don't have it connected to wifi rn
Oh jeeze yeah I wouldn't upgrade that to Windows 11 even if you had a license. That needs to be replaced.
The laptop. It's almost 20 years old. The Latitude D530 was released in 2007.
I wanted to keep it on the most up to date version of 10
oh the specs sticker is lying
it has Core 2 Duo T7250 and 3GB ram
I mean it still seems snappy
I was gonna install mint XFCE
but I wanted to keep the OG windows
How much did you pay for this laptop?
$15CAD at Value Village
This is the better choice. Some flavor of linux would be best on this hardware.
alr
Thanks for the help!
Mostly Roblox and Minecraft
Chat just needs the touch of a freezing cold hand on their face to wake them up.
relaxed day 🙂
110% this. Now that I've dropped off my defective monitor for return, the rest of this long weekend is nothing but sipping beers on the back deck in the sun.
Mhmhm yes collection
i am going to throw me pc at the wall if it wont stop crashing
but why beer when you could have dr pepper?
Eh, I've never really been a fan of Dr. Pepper to be honest. I do like the Strawberries & Cream variant though.
that ones fine, too syrupy imo. The zero sugar ones goated
I can't do any zero sugar sodas. Aspartame gives me headaches. Stevia makes me need the services of a plumber.
thats a great excuse to drink full sugar drinks
what is a reasonable temp to see your gpu hotspot at
there are two kinds of overclockers:
- "chatgpt, does a big MHz make my PC faster"
- "yeah I BIOS-modded a tiny U-series locked laptop chip from four years ago, no problem"
ideally below ~80C, if it's above 90C you should be a little concerned
unless it's a laptop, in which case: it will be a bajillion degrees no matter what
so this is bad
what GPU? they tend to vary a lot, 101C might be acceptable for an ancient Radeon or something
7600xt
oh yeah that's quite hot... not danger-hot, but hotter than it should be
consider a repaste
my 4080S was at 110C for a while, turns out the OEM paste was just crap. I PTMed it and now it doesn't get above 80
that somehow isnt my crashing issue tho
it might be, since silicon gets less stable as it heats up
what does the full OCCT spreadsheet look like?
your 5V supply is 4.7V, and your 3.3V supply is 3.0V 😅 that's not too bad but it's unusually low, maybe give your PSU a check
its like 5 years old its a seasonic 850 focus gold
yeah, having an average temp at 75C and your peak at 100C is a very wide gap, which hints that some of the GPU is uncooled (eg. the paste got crusty or something), a repaste should help. This is what my 4080S looks like (although it's a very different GPU ofc)
and this is what my 4080S looked like with the messed up OEM paste 😅
I know nothing about android under the hood and I saw a pop-up I've never seen before
stock pixel 8 pro settings app says "can't communicate with (ipv6 address)" any ideas what that is?
ill have to pull it out and do that and i'll probably repaste my cpu as well while im at it
FSR stroking out as usual
CPU actually looks alright, 70C on what looks like a ryzen 9 is pretty good actually, mine is hotter 😅
so i'm starting to belive my power supply is why im crashing because it doesnt happen on a seperated cpu+ram and gpu test but if i combine them it crashes immediatly
thats the temps running a cpu ram test
holy shit mushoku tensei pfp
havent heard of that anime in a while
could be, if you have another one it might be worth the test, although both CPU and GPU don't actually use the 5V rail (they shunt down from the 12V rail, which appears steady on your graphs)
For some reason, sometimes the motherboard can cause problems with the 5V/3.3V rail 🤷♂️
its probably psu then lol
what unit?
its not within spec
so, yeah, replace the psu
hear ye hear ye, we shall consule ye excel spreadsheet of greatness
3.14 is the spec minimum of 3.3 rail
probably turning off cause uvp on one of the minor rails
so yeah replace it
yeah, this is not +/- 5%
not a Forza expert but I feel like the car is supposed to stay on the road? maybe I'm just old fashioned
if im getting a new one should i go higher than a 850
drifting a ferrari on the beach? hehe`
the wattage capacity isnt why it failed, so no
i like doing fun stuff with photo mode
if you want to get a high power unit in hopes of it lasting longer do that thtats fine
i typically dont buy under 1000w, but i also buy used power supplies cause im a freak so dont listen to me
What 5V and 3.3V? I only see 4.7V and 3V rails 🤪
@vale briar Try running OCCT with your benchmarks and send us its values for the GPU. Also what CPU/GPU, what benchmark, etc
my bro
jorj
sup
ciao
bonjournooo
i'm lowk knees deep in work lol
what work
took 5 minutes out of my day to goof around on fh6
is it good
elektricity
its fh5 with a far better map, so it's like basically the same game just better map
just got my upgrade y'all
||RTX 3060 > RTX 5070 12GB||
Pretty big upgrade
Happy you didn't get a 5060ti 16gb 
5070 has way more raw powa
Holy shit, i might be changing my monitor soon and i have to redo all my cable management 😭 😭
How much was the ai apocalypse 5070 price?
£540
and bru
it drops the next day (in my current situation I could really use that extra £30)
Worst part about cable management ngl
Oh that's $710 usd $40 away from the 5070ti imaginary MSRP 😭
Huh no way usd is so bad now
yesterday I was trying to benchmark Linux RT performance and I kinda realized... I don't play any RT games 😅
...except for Indiana Jones ATGC, CyberPunk, and War Thunder, there really arn't many games that actually use RT in the big 26
In the states Amazon won't refund the difference not sure what the rules are in the uk
Because its mostly pointless, only good for certain things
With Linux you can run Indiana Jones without raytracing
Imo ray tracing sometimes looks worse
I took my RX 6600, disabled the hardware RT unit, and used the RADV_EXPERIMENTAL=emulate_rt emulated raytracing option and... it only lost like 10% performance, it actually worked just fine. So I did some more reading through AMD's docs and it turns out that, on RDNA 2&3, raytracing is pretty much 90% emulated anyway, so removing the RT unit only actually changes the way VP_INTERSECT is handled 🤣
the extra funny part: turns out that the RX 5700XT has faster emulated raytracing than the 2050Ti hardware raytracing lmfao
W bro enjoy 🔥
Yeah..
4.63v and 2.99v rails
the 5-ish volt rail
more like 4 and a half
isnt it just a conversion tho? aren't you still technically paying the same price just in a different currency
unless the 5070 is actually $800-$900. then thats like £6-700 (sry for u know what)
AMD users can emulate DLSS by taking off their glasses and squinting at the monitor
lol
$630 for a 5070 here before sales tax (some states have no sales tax) my state it's 4.7%
anyone know what burn prevention stuff the hp omen transcend 14 has?
That's a very cool system
I was going to try running the 3060 as well for my two side monitors and the encoder/decoder for obs, but games kept using the 3060, and I didn't know what to do
I think it's a setting in Nvidia app?
I know there's a graphics priority setting in windows
hey y'all, I've been stimming over these 40-60usd portable monitors and want to buy more for display boards home assistant etc, I was wondering if anyone is familiar or knows of any writeups that compare specs of all the different brands. There are a ton of choice from 40-80usd I got this one but I wanna compile the best choices in each price range or ref a good list https://www.amazon.com/dp/B0B9NNWXVP?ref=ppx_yo2ov_dt_b_fed_asin_title
currently overclocking this badboi
Nord VPN might leave Canada if Bill C-22 passes. Due to the bill requiring the capture of logs
trying to set custom res using CRU, but its not letting me use the full refresh rate, only below 199HZ works, any solutions/reasons why?
could be a bitrate problem with your GPU? sadly IIRC there's no way to override that
got a RX 7900 XT
well I can create it at 60hz in CRU, and then change to 240hz in the display settings, so i guess that works
That would not wake me up
My mom once threw a shoe at me, and i slept through it
xd im following some game i guess modding tutorial and they are just using a cracked version of the game
Feel this.
ayo
My grandma does this and barges into my room if I’m sleeping past noon
And not just a simple barge but a full on door kick
Also my battery health has dropped to 96%
L
Still lasting a whole day so that’s fine
@limpid ivy checkmate
at 80% people start to complain
apple allows you to replace it at 79%
if you have apple care i assume
nope
you dont need applecare to get your iphone serviced
it costs less with applecare, but otherwise doesnt matter if you have it or not
apple may have abhorrent pricing without applecare when it comes to broken laptop displays, but they're not entirely scumbags
i wanna see how phones will look when new battery regulations kick in
i hope apple says fuck you to the eu, and stops selling phones there
i prefer a water resistant phone
Most agro ive ever seen ace 
fucking hate the eu tbh with thier BS regulations. like why must you require phones to lose water resistance in trade for battery servicability
one drop of water, and that phone is cooked
(exxageration, but i dont care)
smasnug momnet
ip67 while new iphones have 68
i wouldn't trust a phone with a removable back near a body of water
even freshwater
macbook neo is new rule compliant (except pentalobe screws) and no one is complaining
the m4 air is mostly rule compliant too
has a metal panel
i dont understand why people hate on apples non genuine part warning tbh
how else would you know if you're getting screwed over by a repair shop
if they sold it for what batteries actually cost there wouldnt be a 3rd party battery market
those third party batteries suck ass
ik
S8 30 minutes into cod like
last time i had a 3rd party repair, they charged the same price as the apple store would've charged, and they gave me a non genuine screen, and an aftermarket battery
the non genuine screen looked like absolute shit and had issues not even 20 seconds after i got the device back
you got the real iphone to fake iphone conversion kit installed
Just installed this motherboard can anyone tell me y it's taking between 1-7 minutes to enter the bios
memory training perhaps
^^
Visually what’s the best graphics card ever made?
like, which one looks the best?
That is very subjective
if so, the yeston husbando gpu
Though if I were to choose
I do dig the look of those Titan cards with that Gold Rose finish
any gpu company that puts cool graphics beyond different styles of their logo on their cards is cool to me
looking at you asus
Oh the ones who made the Ishtar Gate GPU
Or as it's officially called "Astral Dhahab"
Dhahab is Arabic for "gold"
of course asus would make a gold gpu for the saudis
The backplate does look identical to the skyscrapers in Riyadh
it can't be for any reason other than the saudis
Yes
the yeston husbando gpu
say what you will about yeston but at least their designs have personality
I remember when everyone in the mid 2000s were doing this (albeit it was on blower style shrouds)
yeah they should start doing that again


