#tech-chat-1
1 messages · Page 1431 of 1
wdym
i dont have ethernet access
is this fr? people said that 650 w is not enough at all
also bitrate requirement is still hard to maintain even though im almost next to the router on my tablet
300w for gpu eh max 65w for CPU and rest 285w for the system
Other components sip power
what happened to ur 2 tplink things
i havent bought the mesh yet since im waiting for when we swap
also DAMN my room is hot
the fact that its also 7:30 pm rn, your computer is certainly the space heater
those meshes are actually sick tho
Monarch Tractor, a startup that raised over 240 million dollars to build AI-powered autonomous electric tractors powered by NVIDIA, has effectively collapsed.
The company laid off nearly its entire staff in late 2025 and abandoned its headquarters.
It now faces lawsuits from dealers who say the tractors could not operate autonomously as promised.
i just looked at my pc and the GPU’s been outputting 480w+ for almost 30 mins and I had the windows closed door shut
i have 2 of the not so high end meshes connected via wire and my god i love them
the cpu was also doing 100w
they're not 10gbps but they're still 2.5ge
i need to get triband mesh
triband mesh is nice i have that
My pc starts stinking if it does lots of work in a hot room 🤔
which model do you have
Is it normal
That sounds like a personal issue
this is wha claude says though
I think its a feature of the pc
Fills my room with gamer scent
stinking? 😭
650w is fine although I'd personally get an 850w due to future upgradability
i want 10g meshes so badly my god
same twin
but ill only swap to mesh when I get 10gbps which idk if its even possible
why would it not be
What are you even doing with that much speed
moving files around often
I have 1gbps and i can download any game in minutes, what could 10x that be?
Huh, I’ve been trying to get Bluetooth working again on my pc for ages at this point but it just refuses to
idk old hdb so like
its just fibre no
and gvt is ripping out all the old cables and upgrading everyone to 3gbps
watching-
streaming 4K 240 FPS content from my PC to my tablet which requires ALOT of biteate
Think it could be a bum driver problem that’s corrupted something? Cause I’ve updated drivers so many times at this point and it essentially just shows as no device active
i live in like a century old and i could get 10g here
Oh
That explains it lol
Anyone else had this issue with Bluetooth?
i should start doing this i have pretty good internet to my tablet
sorry i havent been reading but what's the issue again?
Bluetooth just refuses to function on my pc. It’s integrated in the motherboard, but windows seems to force disable it in devices
hm
updated drivers from your motherboard website yeah?
Yea I have a couple times, checked Bios config everything
I’m gunna do a clean install of the drivers now see if it works for some reason this time
I’d say it could be a hardware fault but my WiFi functions are still working fine
sure, i was gonna recommend deleting the driver in device manager then attempting to reinstall
I had the issue on my windows laptop, it showed back up randomly and works now. It went away and came back randomly.
Yea, though I’m not actually sure how to go about using ASUS installer
There’s about 40 things in this folder ffs
whats the motherboard?
I got a mini led
I can't even take a pic to show it because my phone makes it actually looks better lol
Yes, it’s now saying it’s not compatible with my version of windows
? 😭
For some fucking reason
you clicked the asussetup.exe yes?
bang
FUCKING WOOOOO, god
What a dumb fuckin computer
All of this because I may have mashed my Elite controller so bad that using it wired is now not an option
🤣🤣🤣
i wanna try an xbox controller and see how well it is compared to my ds5
They’re pretty good tbh, I would prefer some form of metal substructure in the grips cause I am a large man 🤣 but it’s lasted a couple years of me playing FIFA which says a lot
anyone knows an app that lets me search for photos/videos using text ? kinda like how google photos on android lets you search by typing in "'cat" and you'll get all images/vide os of a cat in that folder/collection
(need this app for Windows 10/11)
I’ve kinda come to realise I probably need something quite high end otherwise I’ll just end up destroying another one though, the grips on mine have come apart and everything is sort of crumbling thanks to me having a vice grip when I’m pissed off
https://flareseek.com/ dunno how reliable this is, but google told me this
Professional local image search software using AI technology. Supports similar image finding and efficient image library management.
Probably worth noting that will 100% be using the images as training data
oh yeah i know, its a lot of "homework" i wanna search through 😂
so dont care as much about data privacy
Yea, I’d always be wary of using AI tools on anything that could have private photos or anything like that, as long as it’s nothing too important it’d be fine
finally got my new cpu and motherboard
Yup
If you have a spare pc or home server you can do it locally
7800x3d wwwww
9800x3d
Oh looks like a 7 in the screen whoops
Listen man it's all I could afford, it was either that or buy the Xiaomi g pro 27i but that one usually has a red tint issue
Xiaomi has 1152 dimming zones
I know
Also considered one of the best gaming Mini-LED monitors
A mini-led with less than 1000 dimming zones is just pointless
Just a very minor upgrade from edge-lit
Lemme be happy, I went from a cheap office 1080p 60hz office monitor to 1440p 180hz
Still an upgrade in my eyes
Tung tung sahur
If I had money I would've gotten a OLED ofc
250
?
Was on discount from like 310
Ay caramba
When I was first looking at OLED monitors There was an OLED monitor at that same price
But I paid an extra 100 bucks for a monitor with a KVM built in
Cheapest OLED I can find new is like 400
My buddies payed like 850 for his ultra wide OLED which is crazy
My pc itself is like 450 bucks
Shalom
I feel like I should return my monitor and just buy a cheaper one since the mini led and HDR ain't that crazy on this one
Maybe I haven't set up HDR correctly
how is the 5070ti for 4k?
Nah it's just HDR requires a minimum 1000+ dimming zone monitor
Shalom!
Usable
The MSI GeForce RTX 5070 Ti Gaming Trio OC+ is a custom-design variant with a triple slot, triple-fan cooling solution. Testing in our review confirms, this card runs whisper-quiet and at good temperatures. Overclocking potential was fantastic, achieving 12% extra FPS in real-life testing.
So I should return it I see, I'll just get a good one for like 150 that isn't HDR or mini led and I'll have 100 bucks to spare and with some saved money I have I can get myself a 3070
Model is irrelevant
I got lenovos flagship oled for 270USD, you can exploit deals on their website using student discvount+promo stacking but u gotta get ur timing right. 1500USD 4k OLED 240hz for 270 is crazy work
I got a rx 6600 it can barely run 1440p lol
lol
Yuh or get an used monitor I see good Mini-led monitors for very cheap on the used market very often
True yeah
Pesach sameach btw
I just gotta think of a way to return my monitor because I don't have a car or someone to drive me and the box is big asf
get an uber?
I'm European
ah
Plus I live in a little town
Only cities have taxis and Uber
Chag sameach
I'll just order something from Amazon I need and when the post man comes I'll tell him to take it
Save myself a trip
lol
Maximum laziness
Listen, I like being Abit lazy
this raw or with upscaling
Raw
Ok i can get behind 80fps
You can see all the individual game tests here
Im going to buy a 5070ti tmr
They test multiple games
Wait is it true that 1080p looks normal on a 4k display because it's just ÷4 ?
Its half so yes
Yeah
but its /2 not /4
I see I see
2560x1440 at 1080p on the otherhand looks scuffed
Might get 4k one day just for movies and such and then switch to 1080p when playing
Listen I've played on 720p and 1080p all my life
I'm used to it
720p is crazy work
yeah it looks "normal" but if you're playing on like a 27" or 32" display, it will not look super great,
Yeah was about to say that
768p to be exact
1080P PPI at 27" and 32" is pretty low
Yeah ik ik I play on 27, 32 too big for me and 24 too small
i currently have 2 24" 1080p 144hz. But my new 4k oled arrives soon very excited
Hell yeah
got the deal of my life
One day when I move out I'll treat myself with a very good oled
I got a big ass OLED tv downstairs and movies look so good
Ngl I used to prefer watching movies on my phone's OLED screen than on my monitor
I agree my phone way better than my 1080p monitor
Got a 5070 myself but might get a 4k OLED monitor soon
Currently at work I use a 32" 4k monitor it's nice
ram is looking at your walet
with DLSS it'll be mint
yeah you can use performance DLSS at 4K and it'll be fine
I was running a 4070 at 4K for a while
comes tommorow, it was 330😭
Ram and ssd's
i have a gtx 1070 and a 14600k. i need a gpu upgrade whats a good upgrade for me thats atleast 30 series nvidia or 6000 series amd
5090
can you send an ssd to me pwease i wanna dualboot linux properly
🥺
Get a job
should've predicted it
2080-Ti
wouldnt a 3070 be better?
maybe?
on the market right now the 3070 is cheaper for me
sounds like you want the 3070
saw some guy trying to sell a 2080 ti for 590
i mean yes when the 2080 ti is more expensive
the market here in norway is pretty fucked so
I am looking at the 3070 too or rx 6700xt but rather get the 3070 because of RT
you are not ray tracing on a 3070
ray tracing is not enough of an advantage to warrant that
also a 6700xt would probably perform better rt anyway? (35fps compared to 30fps)
There's someone here trying to sell a faulty MSI Pulse laptop with an i7 11800H ans Rtx 3050 Ti for 1200€ because stores still sell it for 1400€
I've seen the 3070 run like almost 60fps on ultra with ultra ray tracing too
what game?
How can't 65% keyboards be more common, feels like they have exactly the keys most people need and use on a daily basis...
I need my num keys and other keys to the right because of cheats
@craggy cove go buy insanely good deal
Faulty i7-11800H Rtx 3050 Ti laptop for only 1000€
...
I've seen a 5090 being sold for 800 with out vram and die
Well I think like +90% of people really don't need them
I feel like 95% is my next switch
A little more compact
Rn the keyboard I'm using is 50 cents lol I got it from a thrift store
It's a keyboard you got 15 years ago with a office pc
I'm gonna put in a GPU as well 2070 super founder edition. So got some good weight to it. I didn't heat insert some stand offs and am lazy just screwing into the plastic behind the motherboard, good enough or don't risk it with that kinda weight the case is 3D printed.
Never had any complaints besides when I hold shift sometimes if I give it 95% pressures instead of 100 it stops registering
We got similar ssds
Nice
i should have a numpad but i was dumb enough to buy a keyboard without one
Get a USB one
Like 15 bucks
OK got this before the shortage. Anyways think into the bare plastic its just PETG is fine or do I need to heat insert some standoffs?
nah ill get a new gpu first
Fairs
Wdym
forza horizon 
Like I'm technically supposed to heat insert some stand offs with my soldering iron. But I didn't buy then (oops) and am lazy. Do you think its safe to screw into only the bare plastic?
they are
60% and 65% generally are extremely popular
the gmk67 is my default recommendation for anyone buying a keyboard nowadays
Hmmmm Idk ngl almost screwed in ssd without a stand off making it bend a little lol
I've never had a m.2 ssd so didn't know I needed a standoff
Instead of heat just use super glue
Idk if glue is conductive
And I'm talking motherboard with GPU weight and all into the 3D print plastic not nvme ssd.
Ohhhhhh
Mb im a little slow
Running on 2 hours of sleep
I want a split one with tenting and some mouse module like a trackpoint or similar.
I have a UHK-80 but I want something more lightweight as well
3g doesn't even exist anymore
why
keep your wii its epic
because i got bored of my wii i've had it since 2013
Also stupid me saw up to 5 fans and up to 4HDD and was like cool and I got a lot of fans and do NEED 4 HDD mounts. But I didn't realize that oops I have to put the HDDs where the fans go and this being PETG (the recommended print material on maker world) I'm getting a little close to the red zone here.
How bad would it be if I only had 1-2 fans at the top of the case? One of them mostly blocked by the PSU? Like how much hotter is it gonna get roughly?
and the wiimotes are expensive
If it would be a child would you still trade him??
no idea, try it and find out
i might
😭
my other choice is to sell a lotta shit to get the money
But I don't want the case warping because I did that and the temps were to high.
i'd need to sell my motorcycle's useless overly big carburator which i don't use
ive had my ps4 for like 8 years i cant sell it its so iconic
so keep an eye on temps as you try it
i've got two PS4 slims, i got bored of those too
i've wanted a psp or psvita since i was 9 years old in school
when one of my classmates took his psp to the class
that thing opened like a transformer to put the discs in
and i remember one time too, i was at a hospital, and some kid had a nintendo DS
holding a handheld instead of a phone levels up your status by like 3 tiers
then again i might just be dumb for buying a psvita for 130 us dollars equivalent
This is supposed to be a server where I put it in a room, run it headless and that's just that. I'm never gonna be gaming with it next to me to just watch it while its going.
So maybe, just maybe, check temps before you abandon it in another room
Because the chances of someone else having run the exact same config and knowing what the temps are gonna be is next to 0
doesn't petg warp at like 70°c
70-80c, but it'll begin softening a bit before that
rad
yall pls help how do i clen my monitor its wayy to dirty
distilled water and a microfiber cloth
spray alcohol directly on it to maximize damage caused to the lcd
ermm distill water?
i usually do what Iroh says
would sanitary alcohol work
water that is just water; bottled water usually has minerals and stuff
do NOT use alcohol
do NOT use alcohol, it can damage the coating on your monitor
Amazing way to melt layers of your monitor off
do not use alcohol
my dad used wet wipes on it some ltime ago now it has smudges all over it
i wonder why
yeah the wet wipes probably ruined the coating
what should i use to clean my ips monitor?
clean microfiber and distilled water
so what bottle water from a store and microfiber
the lion doesn't concern with cleaning his 768p monitor
I want to say wet wipes ruined it but maybe he just spread the smudge around; regardless you should try distilled water with a microfiber cloth, and ask your parents not to clean it with wet wipes next time
not bottle water, distilled water
distilled watter has most of the impurities removed
uhhh dont think i can get that without ordering it
PS: it's worth it to order rather than just risk it
wouldn't it be wise to buy some lens cleaning solution
well wouldnt a damp cloth work?
I'm not going to help you with family matters. that's for you to sort out.
i thought you were a family guy
why am I here there's a full short including plouffe on this
i have glass cleaner for like glasses is that safe to use?
nah
Cleaning your monitor seems like a simple task, but it's easy to make a fatal mistake. Here's how to avoid damaging your display!
#SHORTS #techtips #pcgaming #laptop #screen #cleaning
► GET MERCH: https://lttstore.com
► SUPPORT US ON FLOATPLANE: https://www.floatplane.com/ltt
► AFFILIATES, SPONSORS & REFERRALS: https://lmg.gg/sponsors
...
just use a dry cloth for now till you can get distilled water
there go follow that
isn't that the stupidly big leica one
power graphics
the laptop and monitor was 1500€ at klick 4 years ago tho!
can it run cyberpunk2077 path traced
i used to put some random gigabyte gpu driver disk in to my gpu-less pc hoping it would make it faster
3 frames every 7 months
am i half asleep what does this mean
Yes
Very grainy and very heavy AI processing
Tried one out at a store
I was zooming on text that looked perfectly readable
And the AI postprocessing smothered the text into an unreadable mess
Even the Xiaomi 15T looked way better at 30x zoom
Looked very clear
Whoever built this computer at arvutitark at rocca al mare keskus needs to be touched inappropriately @craggy cove
The fresh air from the front of the intake gets stealen into the psu compartment and then the exhaust fan steals air from the liquid cooler
3.8k computer btw
well they probably just kept the included fans and put a 360mm aio
doubt it will be bad in any way
but #fuckarvutitark still
no reason in particular
Gayass
isn't that a contradictory statement?
it has RT cores...
yesno
Has RT cores, and should actually be used with RT are two different things
ray tracing low sure
Can a 3070 execute RT Ops? Yep
But with 2 gen old cores, and only 8GB RAM, you're running into limitations on that shizz
i can say a 2050 has RT cores so it can raytrace
but should it?
Don't diss my 2050
in 4K Ultra, yes 😛
2080-Ti FTW
lets diss his 2050 in path tracing 4K ultra
I owned a 3070 and it's buns at raytracing
don't diss my motherboard integrated graphics
ur buns are good at RT
Yes papi
headpats

i'm uncomfortable
debates continuing
In some of the photos I can see the PSU mounted elsewhere and not tight above the CPU cooler and it gives an extra 2 fans. I'm trying to maximize my fans and have 4HDD mounts. Did I done goof or using just the files from maker world (he links his manual and website and may have more parts with the case if you buy) is there a way to have 2-3 120mm fans and mount 4 hard drives?
ts frying me
I don't see where you're gonna put 4 HDD's and still put that many case fans in the box
rx what
no, because that number doesn't exist
theres no such thing as a rx 600
I think if you click the link yo his website he has photos and shows the PSU being moved to the back corner allowing for 2 fans at the top, and a fan where the PSU was. So that's a healthy 3 right there. I could then fit 2 hard drives on the bottom and 2 more on the side of the case.
Right now I only see space for 1 fan and I need more then that. I'm running close to the red line as is with this being PETG only.
Dam it, did I just spend weeks on this project and more then half the money of what a real case would cost just to not have this be usable?
I think you're being overly optimistic about what you can put in that case, and didn't do your due diligence first
im really worried about my temps
I'll bite, because this ought to be funny....
Why the fuck are you worried about temps looking at a fan speed chart?
im scared my pc is getting too cold 😔 🥱
the fuck?
are you adding liquid nitrogen or something?
spoiler:
You can't air cool something below room temperature, because physics says "That's illegal!"
but my gpu is starting to grow snow on it 😜 💔
go sit on a cactus
i tried touching it and it didn't feel cold
then move to somewhere warmer
preferably somewhere with high humidity
I can't believe Linus bought a jet
It feels weird given the slowing growth they've been at 120 employees for like 3 years now.
And they've talked about avoiding hiring so they don't have to lay people off.
Then they spend a shit ton on labs then the badminton center.
I guess upfront cost versus emotional cost of having to let someone go due to money.
To be fair I saw on maker wold up to 5 120mm fans and up to 4 HDDs and my brain said 5 120mm fans and 4 HDDs nice.
That's not how it works but did you go to the website he links in his description and also in even just some of the photos on maker world the PSU is mounted to the back corner and not above the CPU cooler somehow and that would give me more fan mounts. He also has a different bracket system for the hard drives as a part on the website if I paid for the files.
Idk I'm just hoping the more then half a price of a case and couple weeks I spent off and on on this isn't for not just because I saw up to...and my brain just said so I can fit both nice.
This is so scummy 😔
Its only in PETG though unfortunately so I need to out fans where I can.
Who makes an ATX type power supply like 5mm taller than a regular atx
I'll try it with just the one fan the creator of this is running much more powerful hardware but also I think he has more fans though.
You realize that you won't melt petg, right?
That's the heater in the monitor
PETG has a higher melting point than PLA
i used PETG in all of my internal plastic components-
the concern is plastic deformation
Yeeees
but if your exhaust temps are 70c you have bigger problems
If the petg was against the boards, maybe.
But air Temps won't be that high
even if it was against the boards, an HDD at 70c is a really unhappy HDD
100%
I need the monitor to work or else I can't use my computer ¯_(ツ)_/¯
Go look at hp or dell non-gamer boxes.
They can run i7 or i9s, and have shit heatsink and airflow. People are obsessed with airflow in enthusiasts circles and need to relax
Aslong as there's like ANY way for air to enter or exit you'll be fine
A rear fan slot is enough anyway
The exhaust will force air to be pulled in through what little spaces there are
It's why people come in crying about thermals when parts hit 70c.
"Is my gpu gonna burn out? I think it's overheating!"
70° C is still in the good thermals range
Like, 15-20°C below where you should be suspicious
Oh btw, reminds me
I saw someone come in and ask if 50° C under load is going to make his PC burn 💔
It's insane what some people worry about
I have however seen a lot of Dells with thermal issues
Tbh if they're uninformed, 50° C does sound high
one desktop I worked on had a square cooler on a 12th gen cpu
from the factory
and the chip was overheating
I swapped on a Thermaltake Gravity i3 and it worked great
Pretty tall top-down cooler
Quick question, does anyone know an application for control the fans on a laptop?
I'm on the wrong channel, aren't I?
Can ask anywhere here is more general chat if no one comes along with anything helpful drop a #1027757333117415424
Thanks, man
Most laptops have a software that controls it like that acer panel, asus panel, etc
What laptop do you have?
Lenovo IdeaPad
In lenova vantage pre installed?
I think you can use the Lenovo Legion Space / Vantage Software
It's a quick download from their site and I think Microsoft store
Nas :3
Shot, I
I'll give it a try
Intel is reportedly preparing yet another CPU price hike, adding to the previous increases implemented in February and March. According to the latest research and channel checks from Chinese market research firm Minutes Logic Society, Intel plans to add another price increase to its existing ones. I...
Is this your CRT
😡
Myte be weird glue if not a cap leak
Vinegar and a brush will break it down if an odd corrosion then some iso 99%
gonna test the CRT with an arduino
it's an MDA Amber one
How big is the upgrade from a i5 7500 to i7 7700 or i7 7700k
IOMMU GROUPS
it’s transcoding you know damn well it doesn’t need allat
Firm quietly boosts H.264 streaming license fees from $100,000 up to staggering $4.5 million — backbone codec of the internet gets meteoric increase, AVC hikes follow disastrous H.265 licensing increases https://www.tomshardware.com/service-providers/streaming/h264-streaming-license-fees-jump-from-100000-to-4-5-million
Is a 1440p OLED monitor worth getting if im already on 1440p?
i am going from a 24 inch to a 27 inch so i suppose that'd be a bigger step up lol
No no no!!!🤬
It will look worse because lower ppi
It's not even surprising it's Asus
Yes
That's what I did and never looked back

OLED with HDR is insane
You know what else is insane
im mostly just really curious what it looks like lmfao
Your monitor BURNING and becoming useless
you know what also would be useless
You can test displays out in physical stores
your house BURNING and not having a home
yea im just curious to see it on different types of games on that same sized screen
i suppose i could just get one and see if i think it's worth it, but sending it back would be such a hassle that i'd probably just keep it
First time I used HDR with OLED i was lowkenuinly mindblown
Hdr isnt even that well supported tho
You can just... go in a store
Crazy idea you dont even have to spend money
in a store i wouldn't be able to just try it how i would use it at home
with games i play and stuff
i might still do that though
Bro got diddled
no
I turned off my monitor and got perfect black level
I got an idea
Yk how there's no compatibility between 1151 V1 and 1151 v2
I think there's a modification of the bios to fix that
I might upgrade from this pesky i5 7500 to something newer after all
Realized I forgot to use an ESD strap while building my pc, oops
I don't own an esd strap :3
I wish Microsoft and Co would do the same https://www.destructoid.com/like-poetry-take-two-fires-its-ai-department-to-cut-costs/
Oh you took it apart alright LOL
very much apart
Im not getting that anymore. I got a better case
It's So stupid, noctua uses glue to mate the bearing magnet to the Plastic blades. Said glue dries out and the blades start slipping until it falls out completely of the rotor
the blades/hub doesn't come off of the motor. It's not meant to.
you tried to do a dumb, and you got the expected result
i just love when my monitor does this
CRT ips
Finally a good build guide https://youtu.be/oY73-p1c5L0
I was recently challenged to build a PC using as many Ridiculous PC Accessories as I possibly could. Seriously so much fun - might have to make a second attempt at this because we have tons of leftover accessories to go through!
Need new thermal paste? Check out the best thermal paste for beginner PC builders (it comes with a practice tool to m...
just fuckin' why
Unblock me :( meanie
@azure topaz ace attorney wants you to unblock him
Can someone explain why reinstalling windows fixes my performance issues on CS?
I did nothing to my PC but power it off and now it does this and I am unable to power it back on. Tried reseating literally everything can't seem to figure out the issue. When it's on I have no problem this happens when I turned it off
looks like your cpu is overheating
When the PC is off?
This is happening after I hit shutdown
if the temp spikes immediately past 100c it will auto shut off as a safety mechanism
it doesnt even look like its posting
this post was supposed to be ragebait, besides its extremly humid where I am anyways
otherwise that sounds like a windows issue
I'm not trying to turn it on as soon as I power it off it does this and becomes unresponsive to anything I do
Looks like something is shorting
oh you arent powering it on yourself?
No
open up the PC and find what connector has some pins that are touching metal
If so, double check your mobo standoffs
All of the sudden out of nowhere? I built this a year ago never had any problems then about a month ago this started happening haven't touched the inside
any case movement could cause a cable to settle
and by movement i even mean the vibrations of you sitting down and standing up from your desk
so as previously stated,
open up the PC and find what connector has some pins that are touching metal
most likely a dead psu or psu cable tripping a protection mode thing
The latter is far more likely
I will take a look then
a dead cable is far more likely?
try replace all cables
A caple with exposed pins is far more likely
Try putting it in rice atp
thee are a lot more cables than psus
Entirely unnecessary, just find what cable has some pins that are freeballing
howtobasic welcome home
yeah fair, but if the cables are from the same set it wouldnt hurt to replace all of them
Just move them somewhere appropriate
A rather costly endeavor to undertake prior to using your eyeballs
Thats overkill
Always try the cheapest, easiest, and most likely options first
jk jk jk
atp get a laptop
its not me lol
elaborate
where do i find mac mini for 399$?
i dont have any issues im just being stupid. we helping undeadrul not me
m4
I usually troubleshoot by starting with the absolute minimum and building my way up until i find my issue
tyou dont
i think it was around that price on black friday
did i miss opportunity
i usually start with prayers followed by threats
may be able to find one used around that price, especially M3 and older
The usual newbie experience
i am not a noob breh
Newbie
An inexperienced newcomer to a particular activity
noob newbie same thing
No
ok
not a mac mini but you get a top of the line mac pro for $300
top of the line only a decade ago
It probably still works great for lighter productivity (as long as you use OpenCore Legacy Patcher or Windows)
$300 is very expensive for one of those. An M1 MacBook Air can be found at the same price on eBay.
That CPU performs about the same as an i7-7700K iirc.
time to make a cluster out of them
You can get them for like $200-250 on eBay if you look hard enough.
Have you tried a different hdmi/DP cable?
is that a plastic bead being described as an apple mac pro?
That's the old "trash can" Mac Pro from 2013
no that’s just what the mac pro looks like
For PCs and internal temps when its a metal box its fine unless its one of those glass ones that actually have no holes like for real and even then only if it has really nice components.
But for me who doesn't have a metal box and instead has a plastic box that not melt per say but does have its own problems with heat warping I do gotta worry.
I can't fit all the fans I want to fit for my case and being PETG I am a little hitting close to the red line here. Any reason I can't just use some zip ties to rout from the other side of the case? The hard drive mounts and PSU take up where the fans go. So yeah some level of obstructions but some gotta be better then nothing?
Also the 1 internal case fan I'm gonna have, actually in the case if I don't try and diy a way to fit more, what orientation do I do? Its gonna be right next to the CPU and PSU at the top of the case (PSU on top of CPU cooler facing out towards the side panel)
you really need to just start trying things
there’s no one here who actually has any experience with your 3d printed case, so none of us really have any idea how to actually help you
after some cooling mods i designed and are improving for the ROG ally, i was able to hit 800-1000+ fps not plugged in on minecraft java (modded) this morning
also steam OS and the performance mods are obvi helping lol
time to turn up the settings
and looking at the sky a bit LMAO
its the usb c cables fault
Why are the couches kissing?
its a modular couch
so u can take it apart into a ton of dif things
lol
Then that's likely your issue. If it wasn't the cable it would be either the monitor or the GPU.
so it turns into a bed and more?
its similar to this
holy big link, ill just send pics
their, like this kinda
ok i shush now, this is tech chat not couch chat

that looks sick
It's the trackers. Remove everything after the ".html" including the "?"
ikrrr, its so useful for movie nights and stuff
Allat for a poop console
Legion Go solos
catto try not to be a hater challenge impossible edition
I'm not wrong though
u kinda are ngl
ok well i like it
You're also gay
TLDR running truenas gonna do some testing for temps and airflow but because the case is PETG I can't be sure I'm not gonna warp the case over time if PC get to hot.
I don't wanna have to contiguously monitor something though. Any way to tell it to shut off after a set period of time if temps reach a certain amount?
gang im getting cyber bullied here
i know its the cable but ive tried every usb c cable i have and its not working or artifacring
do i got a 6650xt sakura edition
Even the steam deck is a way better device than the rog ally even though it's much weaker
ive already got a good PC, and like modding and stuff, so the Ally is perfect for me
cause theirs a ton of things to fix lmao
The Rog Ally has genuinely been one of the worst things I've owned
Asus moment
plus i got it for dirt cheap
which version, what mods, what settings?
maybe
?
on foenem grave
1.21.11, i forget all of them, but almost all are common performance mods, and controllify, and uhhh lemme check
If it doesn't work even when switching cables, then it's not the cable.
The odds of multiple cables being bad are very low.
its the cable doee
🙏🙏🙏🙏
it had this issue with other cables and not with the cable it came with but now it has the issue with the cable it came with
16 chunk render distance, 12 chunk sim distance, Vsync off, frames uncapped, fancy settings, @ocean axle
in performance mode on SteamOS
1080p
Ok, so, not pushing the RD all the way
oh hecks no
lol
but i mean on a tiny screen like this its all fine
maybe i should try out Voxy on it
oh ok wait i just launched it again
closer to 500-1000 fps
not 800-1000
depending on what im doing
?
lol I brickt my PC 😂😂😂
its pretty easy
the same concept of bricking a window
well i know that
i mean like, what did u do to brick it
their are a lot of things that can do that
brick
you beat me to the joke
it only has one dp
Opening Ryzen master software and confirm the wrong change 😅
This 9070 I bought is running cooler than I expected
I have 84g of filament and what I'm printing uses up 88g I am already at only 10% infill and its a fan mount and a hard drive mount for a PC case. How bad would it be if I turned down wall thickness by 1 its on 4 right now. How less weight bearing or rigid will it be?
Tbh I hope cmos reset would fix it
Totally normal
put in a new roll of filament and use that 84g for something else
iirc all 9070's come with PTM7950
at least 9070xt's do
they come with phase change material, no idea if it’s ptm7950 though
aight brousin
Haha
Oohhh must be the good stuff, 48-53 C on OCCT
aight brocolli
Making a software change like this shouldn't (by definition) brick hardware... Hardware has safeguards in place. Just because the device won't boot after these changes does not mean it's a brick. CMOS reset, boot, wait for memory training because AMD be designed poorly like that. Bango-presto, your device is not (by definition) bricked...
Well it feels like it’s brickt 😂
I'm trying to color match and so can't. I got no other blue roll.
a, the term is “bricked”
b, it’s not
But trough that it makes a change to the bios I think
How long does memory training usually take?
never doubt a users ability to send 3v to the cpu
depends™
no more than 5 minutes on consumer platforms though, usually less than 1-2
Damn. Imma leave it for 20 mins
Is it safe to just decrees wall thickness from 4 to 3 and print?
https://makerworld.com/models/1740435?appSharePlatform=copy
Printing 1 more fan and HDD mount.
my recommendation would be maybe don’t skimp out on plastic that is already being expected to replace what would be a metal component usually
The 3mf file of print settings if you use a desktop and download the 3mf say 4 wall loops at 10% infill but idk can I do 3 because I'm so barely not able to have enough filament in the color I want.
there are 2 jumpers on my GPU and I know my core system and monitor are working, I'm going to try them and see if that helps
I want to use the output at the bottom of the photo
If I NEED to I need to but I wanna color match the blue I'm using.
And I'm SO close to having enough of the blue
this is the GPU
why is it backwards
what
wdym backwards
usually components are on the other side of the pcb in reference to the slot
oh
like look at modern pcie gpus, all the components and ports are on the other side
this is ISA
yeah it's not a modern pcie gpu
I can see that
note the Q2 90 sticker
3d warranty
I need to 3d print a proper mount for my pump/res
yes
friendship ended with 2d warranty, 3d warranty is my friend now
@ebon marlin
Buy AI generated pelmeni
Oh damn 8 bit ISA
why is it like georgian
While being more power hungry aswell
how do i get -copilot
Gay
ouch
შეჩემა ხინკალი მოგვპარეს
they have igpus better than that
The used market in tallinn is buns
Everyone here are broke so there's nothing interesting
ტურკიშ?
and imagine you dont live in tallinn
its zover
Frogface Farage
Gay naked frogs
Unlike me 
reskpekt gorgia
Yup
and the steam deck is like a 1050
steam deck 2 bouta blow peoples minds (in 2 years)
Steam deck 2 is set to release in 2028
And Valve wants a chip which doesn't exist
They want a non-semi custom soc
5060 equivalent coming trust
I mean if it releases in 2028, choosing a chip that already exists today would be suboptimal
yep
2028
maybe 5050 performance?
gta 6 before steam deck 2
I wanna replace my Lenovo Loq 12450HX RTX 2050 laptop to something at 14" and a 225U/226V
expensive
one day i will buy a gaming laptop again and its gonna have an igpu
laptop market is dumb
Is anyone good with fixing a bottleneck on one game only?
a bottleneck is a larp term and its a hardware level thing, not something software can fix
- new CPUs announced, along with paper launch of like 3 laptops that have them
- 3 months later: paper launch of 5 more laptops that have them
- 9 months later: you can actually start buying the 3 laptops that paper launched on announce day
- 15 months later: you can buy other laptops with those CPUs
genuinely had the worst night of my life trying to reinstall this shit
Windows 11? It's so simple idk how you struggle
I don’t get it last week it was fine on 30% cpu and now it’s up to a 90% out of nowhere with the cpu
thunar (the linux filemanager) wouldnt transfer ANY iso files over to my ventoy so i was looking for solutions for hours because windows creation tool doesnt work on linux even with wine
it said it transfered but all it did was corrupt all the shit going onto my USB
literally had to wake my mom up and ask her for her laptop password
but its okay now i can play zenless 🫶
Allat for mid
dissing zenless how dare u
Mid goons

Whole game is slop for the goyim
ur just mad that i pulled yidhari and u didnt
mods can u ban catto
Thunar moments
Just use dolphin or gnome files
i did it was too late, my shit was already fucked
😔
sigma
yo got an idea when will x2 superstrike restock in uk?
robin hood my beloved
one day
i overclocked my memory and ran a memtest on it which came back with zero errors. though while playing cs2 it just randomly crashes. any ideas why?
how long did u run memtest
2 cycles
just closing
i dont think thats a ram issue then
tbf i undervolted the cpu as well. tho i went back and turned off the undervolt just to see if it made a diffrence, still crashed
@ebon marlin the laptop has been completed
Batocera 42 on the 1tb nvme and windows 10 on the 256gb nvme
batocera mentioned
3800mhz cl18 on 1.3v isnt that high of an oc i mean come on ram
Yeah cause its good for emulation
Well its the only os ik that's good for emulation
So, with ram prices supposedly "dropping" soon, who wants the bet all prices across the board are going to stay super high due to corporate greed now?
i might need to update bios in case 
Played that shit at work with original hardware it's so buns
Nvm just got a ram error on memtest. OC is unstable
lol damn
i just use playnite and setup all my games there, emulator setup is pretty easy
although its just a windows app not an OS itself
what is this gif supposed to imply
?
God just seeing them pisses me off
can i know or no
Thats not very nice
You should hate everyone equally do you don't discriminate
Goyim are simply not comparable to us
??? what is that supposed to mean 😭
Hate is a strong word
Im not getting into anything here tho i dont wanna be banned
good, i am getting zero answers and just more pictures
Learned that the hard way a few hours ago
gg
fatcat
Lesson was don't talk about egoistic moderators' parent companies
Cook
I love my israeli cat
our israel cat
????????????????????
You don't love my israeli cat? What are you? An antisemite?
Very tempting to give belly rub
you are an odd fellow i must say
tech chat btw
😭
good talk
israeli is the highest tech
Just say that ur antisemitic
antisanitary
not a nice thing to put such terms on others dont you think?
man i wish i lived in a house i can hear my neighbours play fifa
I get a stable 60 fps on batocera with 1440p ps2 emulation but on windows 10 its only 40-50fps
emulation has always been better for me on linux but i care more about playing fortnite so im on windows 11
emulation my beloved
Well on nfs mw
fortnute tung tung tung sahur
I have windows 11 on my pc and windows 10 + batocera on my thinkpad
i saw that fuckass skin
sahuuuur
i was trying hyprland then realized its not for me + its clearly better for single-screen setups
Batocera has no desktop enviroment
Just the menu and a file explorer
bruh stupid server bot deleted my triple t sahur gifs
thanks vro
ur welcome bromine
The fuckass warship bot doesn't allow more than 2 attachments
brousin
7800xt nitro lookin real good tbh
but nvidia has framegen
So does AMD but it's lowkenuinly buns
i use it on cyberpunk to hit 240fps but i already have 170 base
Also if you buy Nvidia you also support the great state of Israel
Officially stuck on fsr3 👎
170 to 240 from framegen is so ass
Framegens purpose is to literally double ur fps lol
i would use optiscaler but im too lazy to manually configure it for each game and im not using a vibecoded shitclient 🥀
yea stupid amd
Just finished V2 of the mod I talked about earlier
thats not portable anymore
real
It’s actually not to much heavier
Making the Rog Ally worse than it already is
which gpu do i buy then
How much added weight
Still feels fine holding it
Used 4070
thats nvidia tho
So
Or 4070 Super
It's used Nvidia gets no money
Unfortunately yeah
4070 is more expensive than a 6900xt
Temps are about the same as V1 but this is a bit more durable and angles the thing better on a desk
Rx 9070/9060xt if no Nvidia
9070xt is the best price to performance if on sale
but thats alot of money for a gpu
Got mine for $610
yea i would be buyng for 4300 on sale thats 625 usd
i probably wont buy amd for a while after they didnt give fsr4 officially to the people who bought a $1000 card a year prior
What country you in
georgia
Oh
yet dlss 4 is on all rtx cards
But that's a state 
Even for weak cards that shouldn't use it depending on the game yet Nvidia did a cool thing and gave it out to them
Then we have amd ..
amd's bad driver propaganda is making itself true again too lol
Official fsr4 support on the steam deck would be super cool
but its amd
9060xt is really good but for that price i can get a 3080 or even a ti or a 6900xt
🙁
I really wouldn't buy amd unless it's current gen
but yea amd not great
shrimply use linux, well even there it can have issues but most i see are due to hardware failure
So many games need Upscaling and fsr3 pretty stinky
but fortnite
tbh on my 258v iv been able to play anything a bit older without too many issues and anything modern with some XESS added in just fine
even arc raiders 2 year old XESS looks pretty good even on a 35"
Surprised I have yet to try fsr on my gpu. But otherwise the games I got don't really need it.
i sent in a support ticket asking for XESS 3 :3
Why not xess override does that not exist
Buy and play the new borderlands then you will xD

its a multiplayer game?
i like xess in some games better than fsr
well XESS is better
Yeah? I use DLSS Override in all games including multiplayer ones like Tarkov
My friends be making me buy games, only to play them once in a while as a group.
tarkov gamer
they either do not apply or worst case get you banned
It doesn't work like that
4k hours sigma
also yes i tried manually swapping the xess files but that just gave me a file violation error
As long as it's under $10 idc but when it's expensive games we only play a few times....
Look up tutorial homoboy
Tru some of the friendslop games my group plays ended up being worth it.
wat
ew friendslop
i am the tutorial
worst thing over the years
Look up tutorial homoboy
i looked up now what
Peak, Repo, Lethal pretty much the only 3 that my group has heavily modded.
Good boy
all friendslop
rv game too
I just goof off while playing and screw everyone over for the fun of it
also the one where you take a cam corder
The moaning horn mod is the best one for lethal company
all trash games friendslop
is it doe
Content Warning, yea that thing died.
all those games i despise
I think that one is part of the mod pack I have. The recent public beta has been interesting, but not gonna be fun going through the mod pack once it releases.
cant even press shift inr oblox anymore
why is it making u buy 500 robux for a 2 robux item
cuz roblox dumb
oh rly
yea ive bought 40
i thought it was 80
it was 80 before
havent gamed on a mobile device in years
yea i bought it from someone elses card


