#tech-chat-1
1 messages · Page 1181 of 1
yes
barely any effort tbh, you could hide most of the braided section under the mobo itself
wrong case choise for a NAS
nah that space is taken up by all the cables coming from the psu
i think it was right because it was free and i already had it
at same time the 3.5" bays were there just for specs and they didn't actually expect you to fill them all
manufacturer be damned, you give me 8 bays and i will use 10 bays
give me 10 bays and i'll make it fit 20-30 drives
you could run 11x3.5" + 6x2.5" in that case
or a lot of 2.5s
i bought before the big spike, 96 gb of 5600 and 16gb of uhhhh, i think 6000? for 242 and 135 (cad$)
or the cheap plastic version
the 16 gb was right as it was spiking
are the 2025 RME's good? i heard mixed about 2024 and before
supposedly the issues are fixed in the 2025 ones
I don't need DDR5 right now as I have an am4 system rocking 32gb of 3200mhz and a ryzen 7 5800x3d BUT I do need to replace my 3070 Ti for something newer tho as that 8GB is NOT enough for 1440p gaming let alone VR mods
My CPU should be plenty for another 5 years I would think
11x 3.5 + 10-15x 2.5 you mean
well in the 8x 3.5" by default, plus 3x3.5" and 6x2.5" using those adapters for 3 bays
the am4 pc im using has 64gb kit of probably 3000 and everything works well so im just not building
everything works, i have the parts, meh
i mentioned it before, through all my computers and stuff i have ~720GB of RAM. Sadly only 64GB is DDR5 (plus 16GB soldered DDR5)
you forget about the amount of 2.5's you can fit in just with some double sided foam tape
i mean just official mounting points
i have a ITX case from ~2010 or so, which has 6 official 3.5" bays, plus one 5.25" bay i currently have occupied with DVD, plus one 2.5"
if i just go by official mounting points then it would be 13x 3.5 + 6x 2.5
great for a nas that doubles up as a media center tbh
also removed wifi from mPCIe slot on the Z77 board, put in a mPCIe to M.2 key M adapter, using 250GB NVMe drive using refind bootloader as system drive
Average at best
wowww
Just built?
Also hoping these screws weren’t important, forgot where I took them out
Upgraded 7700x to a 9950x3d with water cooling
lmao I kept mine in my psu box
nice nice bro I got a ryzen 5 5600xt
I’m stunned at how much more powerful this is from my old gaming laptop
I hate that “anti sag bracket”
Haha yeah
It didn’t reach so used a wireless charging pad and iPhone 4 to help it
sometimes size does matter…
Do you have a 3d printer?
Please never say that again
sigma
@winter lance I’d recommend just making one out of cardboard
bro I gamed on my 4k 80inch tv I was in awe of how powerful it is
Ur smart I’ll look into it when im home
What specs btw
Ryzen 5 5600xt rtx 3080 16gb corsair vengeance pro ram
ddr4
2tb ssd
Not bad, but imo thats not enough ram
I know and I think the ram is faulty
I have a extra 8gb stick at home I might slide in
Dont
Why
Mismatched ram is not a good idea
So I gotta get another hyper x ram stick
It’s not so bad on DDR4
Beats paying another 150 bucks for another 16gig kit atm or whatever it is
I mean the games I play ain’t that intensive and I have a 1080p monitor
At my dorm
I was gonna get water cooling aio
@winter lance wanna see my workstation and my main?
But changed to fan cooler just cos it’s cheaper
Which temps do I care about again from HWinfo?
Sure I built this pc finished it yesterday night
It’s my first ever pc
CPU die average
None of the others matter if you have no need outside being the average Joe.. who needs to ask that question
I bought this case with 3 normal and 3 reverse fans can anyone help me identify which ones are intake and exhaust please
I’m also planning on getting an aio on the top
Should I be exhaust or intake
Those are all exhaust
ideally look at the fans, many have arrows on them depicting rotation direction and air direction
No clue about those. The unobstructed side is usually the side it pulls air into tho
you're just not that good
also if you can, just plug them in power and see which direction they blow air. simplest way
I just spin them with my hand
What’s the ideal set up for my case?
the blade scoops in the direction it blows air fyi
finally took the time to fully swap to linux
Oi this is a SFW discord no showing doorless naky PCs
How do we feel about LUKs
for every case more intake than outtake, because air finds a way out, but if you have more in than out, then you control where air enters, ideally though filtered places. meanwhile if you have more out than in, then air enters anywhere it can, and if not filtered, that includes dust
Alright makes sense
Where should I place my intake and exhaust ones though
Just inserted windows 11 usb into my pc. My computer just liked skipped bios screen and went straight to windows setup i just did it. Should i be worried?
My condition of my head phones
did you have a OS installed before because thats normal if not
First build so no
its normal, are you able to enter the bios with the bios key
I know on MSI boards sometimes they come setup with a special fast boot that requires you to hold the power button till the MSI logo shows or connect a PS/2 keyboard since it won't initalize USB on boot
Msi good
Ok it just gave me an option to go to bios and then skipped that again now windows is installed
I have msi
It said press delete
Can i get back into bios when all this is done
unless you turn on a special fast boot setting yeah
Win11 setup?
some brands have special faster boot up settings in the bios
Yeah
MSI is the only one I know of that sometimes enables it by default
Ok i have gigabyte
why did google get rid of the actual device specific icons for pixels on sign in prompts?
now it just always shows the pixel 9/10 pro XL one
Gl
Ok im in
press alt tab
you might also have to setup work/school account > sign in options > domain join (the non buggy way to create local accounts) if it doesn't default to one fyi
I do love adding my NAS to fstab
These are new
Ok i skipped things like you said but now i have no internet 😭
- does your motherboard have wifi
- you're gonna have to download your wifi drivers on another computer and put them ona USB stick then plug it into this computer and install them if your motherboard has wifi
the cost of buying a brand that doesn't use intel wifi
AMD moment
Bruh
yeah you just gotta download ur drivers on another computer and move them to this one with a usb stick
or plug it into ethernet to download them
Can you link me to some video for this
okay so plug the usb stick into another computer
go to the mfg's website for that board
download the wifi driver. put it on the usb stick, plug the usb stick into this computer, run the wifi driver installer
just saw this... so cool
https://www.youtube.com/watch?v=EM1UL4GHviU
In this exciting first part of our series, we dive into the process of upgrading the NVIDIA RTX 3070 graphics card from 8GB to 16GB of memory! Join us as we explore the benefits of this upgrade, the tools needed, and the step-by-step process to enhance your gaming and productivity experience. Discover how increasing the VRAM can impact performan...
Ta
Thanks 😭 im blessed to have someone like you rn
Im gonna do it on the same usb stick i got windows on or should i clear it somehow first
its fine to do that
Ok so like how do i get the file into my usb drive
drag it to the one that says ESD-USB
A little unrelated but shouldnt i be able to connect my peripherals like mouse and keyboard to the monitor. When i do it doesnt work but when i connect to the pc it does
man tasker is kinda goated
Man I can confirm my ram is fucked
I can’t even open task manager bruh
Why the fuck is ram so expensive £200 for 32gb ????
blame ai
I get new ones for Christmas
do you have the data cable connected to your monitor
theres a cable that plugs into your monitor to enable that seperate of your video cable
if you have a USB C port its only for USB C connected devices
you are missing this cable form your PC to your monitor
to a connector like this
lmao noone is gonna use that
what is the point of ai playing the game for me
headphones in general or the model I used?
oldest
what
This... Literally is just going to add to the bot problems, albeit just... Stupider than before.
which of them is older
do you have multiple headphones?
yes
so which of these do you use and when did you bought these
they were originally the Koss Porta Pros which I used until I got the KSC75s and decided to mod the PPs and make them wireless using custom components
hmm are wireless better than wired but at what situations?
they're better for times when you wished your headphones didn't have a wire.
If this ram kit im trying to buy does not mention amd expo and only xmp is it going to work or overclock at its speed for my amd cpu?
EXPO= XMP
Should i look for a 4k monitor at my local tech shop
Maybe they have one and i could get it cheaper
Theres no difference?
no
Unless said otherwise
So nothing to worry and should just buy it
Yes
Just depends on what generation of ram you are dealing with honestly
and if you are dealing with amd or intel
its 6000mhz ddr5 cl36
are you gaming or doing professional tasks?
there is zero point in going above 100 PPI if you're just gaming (4K is above 100 PPI till 32")
Both
Hmm thats true but idk id love for my monitor to be crystal clear
Then get a 5K panel
4K for 24"
5K for 27"
6K for 32" those are actual crystal clear panels
hmm but since my local store sells older things i think they wont have past 24
there is a noticable difference between 4K and 5K 27 in literally anything but video and gaming
my 5K 27" is from 2014
also 4K 24" panels are rarer than 5K 27" lol
i use 24 on 1080p rn.. i used to use 1440p ultrawide 34 inches but i cant go back i used the 24 inch 1080p one while my bigger one was at repairs and i cant go back to big size
It hurts my eyes now
Hmm thats true ill see what they have
Most of the hidpi panels are holding their value extremely well since the people who bought them held onto them forever
And modern counterparts don't offer much over them as well as costing like $2K-$6K
55 delivery 
i would never want anything with denser pixels than 27" 1440p/32" 4k for text. Scaling is horrible to use, and smaller displays than that for that resolution means you have to use scaling
They have steel casings
The whole point of 5K 27" and 6K 32" is they scale easily
200% scaling works significantly better than 175%
Delivery man prove ?
no those monitors just weight a lot
maybe on macOS. Window scaling is horrible
Ggz ram is fried
Where the gell can you find a 6k display aside from that fiendishly expensive IPS-black Dell
Pro display XDR
And asus makes a Chinese only one
LG makes one too I think
I see
I had to buy a mount made for a 60" TV because my UP2715K kept bending mounts
I’ve had windows 11 do this sometimes
it's THAT heavy
I'm using a 5K 27" except for win32 apps 200% works fine on windows
Windows only works correctly with scaling factors of 100%
Yea it won’t let me overclock ram to its advertised speed
Some really old win32 apps (like 20+ year old ones) will appear fuzzy though
The UP2715K came out before 5K was really able to exist over display port and the casing acts as a giant heatsink, if you try to run them without the casing they'll cook the display controller fairly quickly
It's got a full ass arm SOC as it's display controller since it needs to combine 2 display signals
that's why LG didn't sell the LM270QQ as a discrete display till a few years after they begun producing it for the iMac 27" btw because they couldn't find a display controller that could reasonably be used for it
AND that's why the UF5K is Thunderbolt only despite being targeted at windows PCs since the only one they could find is actually using thunderbolt links and not display port links (its one of the very very very few monitors that do this)
granted this was in 2017, Planar and Asus proved you can do it over display port just fine nowadays
How hard are Apple Products being hit by the memory shortage? Curious
Apple has contracts for memory they just aren't being hit yet
the memory shortage is gonna have to continue for a few years to hit apple
same way for a few other OEMs (looking at you dell)
It’s the same, so somehow it’s become less heinous by way of standing still
Right now you could do a LOT worse than an m4 Mac mini as a web browsing appliance
Cool. Because if my financial situation finally gets a boost before the bubble pops, might actually consider getting into the Apple Ecosystem
EXPO is for AMD cpus and XMP is for Intel
I love my mini, it’s amazing, A+++ experience with the base ram
hot
Yeah so I have an amd cpu but this ram kit im deciding if I should or notn only mentions intel xmp
what ram kit?
some brands have similar sets with different names for different CPUs. like G.skill flare vs ripjaw (iirc, cmiiw)
It's from Manta XSky
wish me luck im swtiching to linux
gl
Ok
ofc my backup windows iso has to download slow
I dunno what brand that is
Oh dang alr ty
bomb 😊
np. I am only helpful on a few very specific things
Should I update my bios if it’s 2024??
yes
yeah but it only really comes in 24" and 30" fyi
24" will be 1080P 30" will be 1600P
Not very lol
But the ram was already expensive
Is 1440p at 24 inches good i might go for that
i kinda like 27 inch
only if theres a reason to
My ram is acting up and won’t open shi and keeps crashing my pc
updating your bios can brick your computer, if you have a reason to update it obviously update
if you dont have a reason, dont
Out of context is crazy
Keep getting ram related issues
But anyway im thinking of doing a case swap so my desktop is actually on my desk.. top
new beginning out of nowhere
Yes
I lowk lost all screws of old
gl not losing one
for the mobo and everything too?
I think so if u order new case it’ll come with standoffs n everything
16:10 is my prefered aspect ratio but its basically dead for desktop which is annoying
yo guys is $320 cad a steal for this pc
its.. a pc alright
Yes its a steal
theyre stealing your money
jk for 300 dollas its actually really good
aight
i mean it's got no case fans tho... still those r cheap, but that might say smth abt the build quality
Shoutout ventoy for never working
rufus?
Does anyone here repair laptops?
ive got some experience
why?
Looking for a good electric screwdriver kit
Thinking of doing it for money in the future also
those generic amazon ones should be fine
i bought a $15 walmart one and used it for a few years
data center loses
don't buy a $15 one though; it was rlly underpowered
budget?
I've only seen maybe 2 or 3 kits with stuff other than the driver and bits budget for a kit like $60 maybe
you won’t
gianotmus link
amazon using the longest links challenge
Hmm looking into a horizontal pc case
lmao
You can make the link shorter /ref and after can be deleted
i have some problems tho my psu and cpu cooler
this isnt necesary but i like a clean build and for christmas i might do ts
next time you need to break a mouse wheel for it
Thanks but I can probably still find better
Merry Christmas
balright old cpu
min for win11 or was it the 2700x?
I've thought of just kind of building my own kit from the individual parts ifixit sells and getting a separate good electric screwdriver but then theres the case part
guys for $120 i found an rx 580, 16gb, and i5 4460 pc
I own a 5090 now this is a big day
😭
big day indeed
Gg it’s hardware
looks fire on the box
gg buying new mem
@winter lance forgot to send these
:3
Nice nice I’m trying to find which ram is faulty rn
Really enjoying my life rn
I’m coming to politely take them off u
2x64GB DDR5-6000 CL34
Im american I own guns rawr >:3
I don’t even need ddr 5 I need 4
Cl34 🤢
we’re in bad times okay?
Yah I know my DDR4 is CL16
I’m a middle easterner we own guns and rpgs and machine guns
Counter argument: F35B
just remember Serbs took down one of ur f117s
lmao i remember that
That old thing lol
Still americas prized possession at the time got smoked
you mean the ancient ass jet we don’t really use anymore?
At the time it was state of the arc no?
F22 is genuinely scary I've heard guys who did the war games thing they say it just appears out of nowhere
Unc status
art*
Nothing the public ever sees is state of the art
as far as the US government was willing to admit to the public
Theres always something clasified
my ninja im in high skl
If I told you more id go to federal prison tehe :3
someone donate ram 🤲 🙏
This is why windows was failing to install until it did it after 4 hours
also it was shot down in 1999, the f22 came into service in 1997
Jeez f22 is old
32gb ddr5 for the rest of ur pc
the f117 had already been replaced by the time it had been shot down for the first time
and still unmatched by any adversary
Su57
it’s ddr 4 bro 😞
in ac7 su 57 is wayyyy better than f22
idk Russian planes do be cooler than American ones
you mean the gen 4.5 jet that there’s only 22 functional samples of
Even in war thunder Russian bias
except for f15 and f18
i love those two
F15 I agree f18 I don’t
nah
F22>
Su47 is so cool ngl
we have 187 f22s in service and more than 600 f35s
its proto only
Cringe 😬
eurofighter is good asw
would us or china win in a 1v1
C27 j spartan my beloved
only 600 in operation and isn’t even a fifth gen fighter
china industry is just too op + insane population numbers
omitting nuclear armaments, the US
if you include nuclear armaments, no one wins
But our pilot lived 
I have my money on china ngl
china's way more advanced but are rookies
yea
US is way more advanced with production weapons systems*
ain’t she preeetty
doesn’t matter if you can make a better jet if you can only make a handful of them
china pumped out a huge navy in like 20 years
Bigger than the us’s navy lol
china has more i think
more air personnel at least
China didn't start issuing body armour until 2010/2020
too many manpower to use
just spawn in new soldiers
first message from linux :D
china's pumping out weapons and vehicles wayy faster than the us tho
refunds?
ur fine then
They also pump out smoke for the hj12 the USA javelin equivalent
Cf-101 >>>>>
Can I run my gpu with daisy chained cables from psu or unstable?
Yes
It's best not to daisy chain
Depends on if your psu can handle it
Older psu’s cannot
I got a brand new 650 watt gold rated psu from coolermaster
And a 3080 ( it runs fine and doesn’t crash or shi)
Cos daisy chained looks much better
performance > appearance
Dont
No
So run two separate cables
It's stupid imo
Yes
Ok thanks
the scaling is gonna be so shit for 1440P 24"
rich ppl problems
You’re extremely wrong
If you're on windows don't use monitors that are gonna be at scaling factors that aren't a multiple of 100 it never goes well
How..? Fractional scaling is the buggiest shit ever
I used to use 4k on 15” display
Fractional scaling is only an issue when you dont restart
you've managed to avoid win32 apps
Win32 died long ago
lot of stuff still uses it
Give an example of something that was made in the last 8 years
Can you not use an acronym
The Microsoft corporation and it's inventions have been a disaster for the human race
Microsoft Management Console?
shit like Hyper-V manager, disk management and a lot of other stuff rely on it
@buoyant bridge mmc was made 28 years ago
and its still being used in modern windows?
Thats a niche usecase
I didn't know formatting a hard drive was a niche usecase
Do people not use diskutil
no because disk management is built into windows and works
also isnt diskutil a macos thing
do you mean diskpart? because most windows users don't even know that exists
Disk Management is the GUI counterpart and Diskpart is the CLI counterpart for windows
MMC is just a framework fyi new stuff that uses it is still made
the SSO Configuration Application in windows (added in Dec 2024) is a MMC Snap In
anything microsoft adds management wise is accessible via MMC and a Powershell commandlette
Win32 and WinAPI (basically the same thing Win32 is the more common name, WinAPI is the modern one) don't support scaling so they can only properly scale by factors of 100
less common now tho
WinUI 3 and WASDK do support fractional scaling and they're fine
I use a catapillar one for computer stuff personally
CAT and Craftsman, I don't think the CAT stuff is being sold under CAT (only bluepoint) now though
I'll check them out
yeah bluepoint BPS27A is the catalog number for the precision screwdrivers now
CATS27A is the CAT catalog number (same set, cat is yellow, bluepoint is blue, snap-on makes both
Confusing me
Snap-On makes Catapillar hand tools and they're copies of the inhouse blue point ones
bluepoint is for stuff snap-on will sell you outside fo a tool truck
this is mostly what I use for electronics that need precision screwdrivers since lifetime warranty and I can just warranty it with my mechanic tools https://shop.snapon.com/product/Electronic-Screwdriver-Bit-Driver-Sets/25-pc-Electronic-Interchangeable-Bit-Mini-Screwdriver-Set-(Red)/SGDEC25RK
used to be big on ifixit but ifixit treats bits as disposable
I'm wanting to get an electric screwdriver and need more parts and I don't really see much good in spending that much on that small amount of equipment
electric screwdrivers r such a waste imo
all the ones I've used except for that 4v craftsman and 4v milwaukee don't have enough torque to break screws loose
Depends on screw size
I'm not looking for some giant tool for furniture or something tiny for iphones
More of desktop and laptop repair
no like the hoto one I had litterally couldn't get the bottom pannel screws on my thinkpad loose on its own
you'd always have to manually break them lose
the milwaukee and craftsman would though
Some of them are bad yeah
granted $25 set from amazon vs $180 set from home depot and $65 set from lowes
Some are large and have tiny battery capacity and torque it makes no ense
Most stuff from hardware stores is expensive
yeah but its also actually good tools
Yes but still overpriced
tool truck stuff is overpriced
but you also get life time warranty and they'll warranty basically any hand tool no questions asked
also ends up being a buy it once and never replace it situation
Eh
those cheapo junk tools I buy off amazon for a "one time use" end up breaking the next time I use them
What's this? Ive never seen it on my phone before it always says 5G up here but im traveling
(/j)
bought a 5/8th 5 point socket off amazon for $3 to open my water meter cover cause I needed to shut my water off to add a shut off for the toilet and ended up having to drive to lowes and buy a $30 one because the amazon one broke when i tried closing the meter cover :soB:
wasn't even on a impact wrench it was on a regular ass stubby 3/8 rachet
it’s insane how much fake cat 6A, cat 8 cabling is out in the market
Just another of version of 4g it seems
cat 8 isn't a spec for RJ45
8.1-8.2
did they implement RJ45 into that spec yet?
i believe
I've only ever seen them terminated in TERA and GG45 plugs so
when you need the copper wire to go really fast for some reason \
I litterally do not understand the point of mobile GPUs
Good enough for gaming
given the disincentive to buy ddr5 is there a reasonable difference to upgrade from a 5600x to a 5800x3d
TIA recognizes class I (cat 8.1) but doesn’t 8.2 but iso does
i'm still surprised the amd 9000 series is at or below msrp
I've just never seen a real CAT8 cable terminated in RJ45
I have a few short cat8 runs on a rack in the warehouse both those are all GG45
i’m rather angry on that manufacturers put smaller gauge wires into each terminal terminal wire instead of using solid awg23 or 26
and don’t use proper braiding or any at all
and just call it cat 6a or cat7 or cat8 or cat8.1 or cat8.2
the major cable mfgs don't even sell above cat6A rn in spools so
Shop high-quality low voltage wires at Southwire and complete your project with ease. Get started today.
Elite Cable is the only one who makes cat7/cat8 in spools afaik rn
i didn't see a need to use more than 16gb but with the software i've been racking up having discord, spotify, chrome and my photo software make up 12-14gb and if i forget about my photo software in the background my games crash from not having enough ram, i technically have another 2 identical sticks in a different system, either i can steal one stick from a third pc and leave both smaller systems with 8gb assuming its only for light work or buy another kit of 16gb ddr4 if i can still find something for less than 60
it’s still a thing recognized by TIA and especially recognized by iso, ieee
except 8.2
yeah but does it exist outside of paper
pcie 32x exists on paper but basically nothing uses it except some special network cards
it’s a spec
It's a spec that is entirely pointless for basically anyone which is why you won't find it anywhere
cat also sounds cool in concept but it just mostly mislead customers that don’t know what twisting does electrically, if gauges matter, if shielding matters
but better than nothing
If you need more than 10g at more than 100m you should be using fiber
how much ram does ur phone need? is 12gb enough for some multi tasking like google maps, YT/spotify, android auto and like insta or whatsapp simultaneously?
the issue is with manufacturers overrating their cables
Never seen any reputable manufacturer do that, don't buy noname shit off Amazon
noname shit if filled at retail
He bought some hadhashfsdyuhgasudg branded PSu
sometimes even the retailer owned brands are shit
reason why they are usually budget prices
the iphone 8 had 3gb and i never noticed until software updates killed it
issue is the retailer would have to check whenever the cable can support those speeds under realistic scenarios
and the manufacturers that do that work are more pricey
and retailers are still human so to monke brain cat 8 sound better than cat 6a especially when cat 8 cabelle is cheaper
im thinking abt spending like £600 on a phone i wwanna keep for a few years
just trynna think if i get 16gb or 12
lmao i had plans for an sff using the 850w corsair sfx i have in my current pc which definitely doesnt need that much but its what the store had at the time and swap it out for a 600w
i want it to feel smooth in a few years time not like sloppy and laggy
is a used RTX 3080 10GB for around $500 CAD worth it? i'd be upgrading from a RTX 3070. reason i want to stick with NVIDIA is because i run folding@home when i'm not gaming, which is 95% of the time
and also consumers buy those cables
most modern ones have around 8 i think and i was about to jump into like a rog 9 specifically for the integrated headphone port and battery life but free iphone + no extra money anyways
it’s basicly a four way fault of the market chain
my 8 way fiber converters are all terminated in GG45 but thats because those are terrabit building to building connections
GG45 actually cannot acomplish it currently funny enough
What is a recommened amount of torque for an electric screwdriver
hmm okay thank you
35+ inch pounds
i've also been thinking if the ivy bridge era junk i have in my closet is profitable or it's just taking up space
compare to whatever the previous gen of a flag ship brand is for tool specs as that will be more than enough
What is that in Nm
i just spent 500 on a new camera lens in the hopes i can get enough gigs to pay it off 💀
that's something you can easily google
Then don't respond if you're gonna say google I have enough common sense to try that
i'm due for a $50 payment some time and hopefully decent client reach so i can make my moneys worth in 2 ish months
(dont) wish me luck with my hackintosh!
If you have enough common sense to try it then why'd you type it in here instead of there
4.0 Nm
I obviously did both
youre not being lofi rn
I've seen so many with less than half of 1Nm
I'm trying to be but I got a not very bright respsonse
then why did you ask for conversions here when google can do it in like nanoseconds 
because with things like that it usually takes a few searches
How?????
How google is made idk
lmao did you even try
No you have a severe skill issue lmao
Okay
Yo guys for $120 CAD?
which 500w psu
also that ram is prob the most expensive part
which won
no clue
its ddr3
still 16gb
bro kijiji is canada
no matter
evil
rx 400/500 transition to legacy drivers and then get dropped
So for $120 cad?
Bad price imo
idk
It's borderline e-waste
eh i can sink some ddr4 am4 upgrades into it
Well it is e-waste, with the gpu being borderline e-waste
Then just buy that.... Don't bother with this garbage
ddr4 is current sky high with pricing as well
I can guarantee that PSU won't be useable
lovely E or F tier
i mean he said i can quickly test it out at his place
and apparently i'll get decent 1080p mid-low settings fps
with those specs
check out those aliexpress mini pcs that for for 100-200
they may have more power than that cpu and run ddr4 or ddr5
nah i want an actual pc
but weaker gpu
see i've got a ps5 and a whole lot of other stuff but i've always wanted a pc
with dram pricing you won’t
the mini pc is a pc
eh i won't upgrade it for a few years ig until prices drop
This is pointless if none of the things in the PC are usable when you upgrade
there are people buying out the mini pcs and selling the ram out of them and then sell the rest for profit
just check them out
you need some actual expectations
shoot for midrange preformance not super op mega balls
i mean i'm expecting 25-30 fps lowest settings 1080p on cyberpunk
a few searches beats waiting hours for a response in tech support or none in tech chats
It's sad to see how many people think i don't have the common sense to use the resources I know I have access to
I got a asrock A620-X motherboard. Idk if it has wireless Bluetooth and WiFi tho
then why arent you using them
and im sorry but i cant take you serious hwen ur server tag is "FEET"
Game server I'm in they randomly chose feet
well fair enough, they do take whatever they can
Guys why is my case blinking red , i did a intel to amd replace, motherboard etc, when ive used the pc for a while witb m2 ssd the red light on top of the case started blinking
HDD activity light?
The little dot
I know I haven't seen an activity light in years personally
Red light ont he motherboard itself blinking or on the case near the power LED?
Only lights on a case to blink that I am aware of are the activity lights
I didnt have the hdd wire on the motherboard bc i forgot it and it was only on the psu connected
Its on top the case where u have the power up button not the motherboard
But the hdd is now connected normally and works
why cant i use the appearance slider on my monitor; it doesnt even appear in windows for desktop; it appears on my laptop
drive activity light then yeah
I had only like m2 on
Hit the button on the monitor itself @pulsar root ?
i mean yeah i can do it through there, but why wont it show up in the slider thing
its annoying to hit the button repeatedly
Because it isn't something Windows can access?
But it was still blinking red with only hdd connected to psu and not mobo
Just the m2 was o
oh ok
@sinful garden it's a drive activity light and should work with any drive attached to the motherboard aka hdd or otherwise
I am just use to them being from before m.2s and ssds were a thing
Why is it impossible to find a small electric screwdriver with an actual decent amount of torque
🙄
So the problem is the hdd?
@sinful garden There is no problem
So the Red blinking will be forever?
ACTIVITY LIGHT means it will blink and light when the drive is being accessed
hello guys i need a bit of help on setting up a camera system with a raspberry pi
@sinful garden unless you unplug the cable for it yeah
For the "Front panel" connection there is power reset and activity light so 3 cables normally unless the case is using a single block for them
so i have my raspberry pi 5 connected to a arducam owlsight 64mp streamed the feed locally to my old laptop with rtx 3050 so i can run ai inference. my question is if i wanted to wire up another camera from the other side of my house how would i do it ?
POE based camera?
like imma put my laptop in my garage and the raspberry pi in the garage but how would i set the second camera from the other side of the house
Power Over Ethernet based networked camera
so like ip cameras?
yeah
So we can all agree companies who sell electric screwdrivers are on some bs
Ye but it was being accessed the whole day without doing nothing
what if i wanted to use a raspberry pi camera ?
Never touched them and don't know if those can be accessed over the network or not
Do AIOs have anti freezing agents in their liquid? I'm worried about my AIO being in cold trucks or other unheated areas during shipping
@sage ocean shouldn't be a problem during shipping
Idk just the red light was blinking the whole day , i didnt do nothing on the pc just had it turned on
Its cold
Whats normal temp range though
like -40 to like 140 BUT I may be off on that
If you mean f then a lot warmer even if were talking about cold
Pretty sure that is C
Normal people units or freedom land units
But it definitely won't freeze during shipping because of chemicals in them
c
not by tonnage
Looks like I was off but yeah there shouldn't be an issue https://linustechtips.com/topic/489500-corsair-h100i-gtx-will-freeze-during-shipping/#comment-6581836
Hello, I am new here and i have a quick question, I am going to get a corsair h100i gtx from new egg and they ship with purolator, but purolator doesnt have temp controled trucks. so will my h100i arrive frozen? if it does will it still be usable after it thaws?
That was like 10 years ago tho
Meow
They do
Good
There would be alot more controversies if there wasnt
https://xyzpcgear.com/product/xyz-hydrotemp-aio-360-black/
Is this a good aio?
Im still inbeetween the h9 flow or h5 flow
except for the name brands yeah
Milwaukee, Craftsman, Snap-On by the looks of things make good ones
mhm
craftman is like the cheapest brand you can get thats a name brand and makes good tools
I bought this at lowes for $65 when it first came out and can say its pretty good
CRAFTSMAN has what you need for home device and electronics repairs. The 25 pc. Cordless Precision Screwdriver Set is an effective solution for low torque applications and includes a charging base for tabletop convenience. The screwdriver drives screws up to 4X as fast** with up to 230 no-load RP...
if you're gonna buy a cordless tool just shell the extra money for a milwaukee though they're worth it 99% of the time and to you as a consumer you will never manage to break them within a reasonable service life
I have milwaukee shit thats over 20 years old and still going strong after being beat to death on job sites
Dang
Where can I get windows keys without taking out a mortgage
I was trying to find a review for that
evil skeleton rises from the grave is the most I can say
You could also just not activate windows
people who watch tool reviews are the dumbest people imo
🥀
miluwakee don’t do that
the reason the big tool brands stay in buisness is they'll make a tool that preforms as needed and you can expect that
should i go with a air or liquid cooler for a ryzen 7 7800x3d
thats why Milwaukee and Dewalt have esentially held all professional power tools for over a decade now
Rigid and Craftsman are starting to come up (the rebrands of Milwaukee and Dewalt) but they're hard for any market dominance
also why snap-on is esentially undefeated for automotive with carrer mechanics
I watch reviews to get performance checks on things
and how they hold up with tasks
and comparisons to really choose what is worth buying
you buy a big brand tool, it has the preformance, if it doesn't which is rare you return it
Watching them kinda helps with not having to do that
yknow how many tools I've bought at lowes that didn't do the job they're made to do
one, a dewalt 20V advantage recip saw which was DOA and lowes exchanged for a working one
now I've gotten some shitty non snap-on branded stuff off a snap-on truck before but thats because the owner of it was selling extra stuff outside of snap-on
I keep seeing videos of some other electric screwdriver craftsman makes but never what was in the link
the one I linked is newer and a precision 4mm screwdriver
the old one sucked from what I heard, then again its a clone of a dewalt tool designed in like 2014
Sad
if you want a powerful cordless screwdriver just get a pistol grip one which takes a full sized battery
the one I linked is for computer work n stuff
That is what I need something for that
Size is a somewhat big concern
(these are diffrent than a impact driver they have a clutch and don't use an anvil
get one of these and throw a screwdriver bit adapter on it?
No clue what those are I don't know much about tools with names of parts
The one you linked is good
I was saying I need one for computer work
Just trying to find the torque
cordless screwdriver is the most compact of the pistol grip driving/drilling tools and uses hex bits
impact driver is inbetween and has an anvil and no clutch, produces a shitload of torque (like enough to take off lug nuts on sedans n stuff)
drill is the largest, uses a 3 jaw chuck and can accept more things than the others do also some can drill into concrete
its 29 inch pounds
3.28nm (I had to email craftsman to get that answer fyi)
the milwaukee 2102-22 is the most powerful cordless screwdriver afaik
what does afaik mean?
as far as I know
nice gun
is it pistol grip?
its both
not mine
This?
it just folds, the battery is changable on these though
im psure they're the only tool that takes that battery though
oof
its not red link like M12 and M18 are though so you canjust buy offbrand ones and the tool wont freak out
Mhm
I think in the future I will get the one from craftsman
and just find some decent other parts for repair like spudgers and things
if ur gonna get into electronics repair just start with hand tools
dont use powered stuff you'll strip screws and then have to learn how to drill off a screw head which is NOT fun to do in a laptop
can someone help, ive been having constant driver timeouts every couple minutes for the past 2 or 3 hours
have you tried DDU then reinstalling the driver
yeah
i tried reinstalling an older version and its still broken
safe mode doesnt work last time i tried
i try to log in with safe mode and it just doesnt let me
you need to be in safe mode when you run DDU
have you tried using another windows install?
how tf do i do that
theres a pretty good chance whatever makes you unable to log in while in safe mode is causing the driver time out
swap your SSD and make a new windows install
yes because i have a spare ssd lying around
Do ASROCK mobos still fry cpus
if you don't update the bios
How do I update it without a CPU in it
AMD has a program where they'll send you a loaner CPU
also its not like it instantly fries your CPU it does it slowly
Oh right
cant you update your bios without a cpu if it has a bios flash
Well I assume my bios will come updated tho because it says 9000 support on the box
I don't think any AMD boards support EC flashing but yeah you can on Intel
I updated my new mobo without a CPU or RAM in it via EC flashing since it can't boot my CPU on the release bios
how do i open windows in safe mode
did you even try safe mode before
hold shift and click restart
yeah so you're stupid and chatGPT probably lied
safe mode disables networking usually
Thanks but personally I think I will be fine
I'm not necessarily supposed to know but I know that I will be getting a somewhat weaker driver soon
now what
huh
press restart
and then run DDU (if you didnt download it you're gonna have to exit safe mode and download it)
press 4 right
yeah
clean and restart I’m guessing
mhm
you can install newer drivers over auto installed drivers
DDU just resolves issues of there being many old driver files
do I install 25.11.1 or 25.12.1, I had no issues with 11 the first time, but once I installed 12 I had issues, and when I switched back to 11 the same thing happened
whaterver is latest
I download the gb version and not the 40 mb version right
if a fan's berrings start..squeeking? wearing? can they be lubricated? or is best just to replace it?
either works
its wear not lack of lube
most PC fans are brushless
Messing around with trying to see the FM radio on this car Bluetooth adapter
What aio with lcd do you guys recommend?
none
How would you even drill of a screw head in a laptop
I've seen some ways and it seems like it would just straight up damage the laptop
alright i reinstalled them, do i just wait to see if any issues show up now
they’re so common nowadays it’s not cool
cases with screens are cooler
carefully.. with a dremel with lots of light and magnification
but also… if you won’t really use the screen it aint that cool
🕊️
I'm guessing a dremel is a drill bit type?
a tool
these are genuinely big ass screens on cases available
just weird aspect ratios
handheld rotary tool for stuff like sanding and cutting
best part is most of them aren’t even that expensive
Oh okay
(but you still pay a premium for the integrated featurey)
I think I have heard dremel maybe 5 times in my life
depends on where the screw is, how easy it would be
I've seen people not use a dremel but I guess it was because they weren't dealing with something like a laptop
you new a big woodsaw
and slice through the laptop
you’ll just need a new blade each time you find steel
ig i’m not funneh welp
Is a 4060ti + i7 14700f + 16gb ddr5 for 900 dollars a steal?
I would not say that's a steal, no
mediocre
Saw someone list their prebuilt for that price so idk
yeah I mean... second hand its appropriate, but not a "steal"
a whole pc? well, that’s different
4060 Ti leaves a lot to be desired
Its the msi mag infinite S3 I believe
what’s the psu, ssd and motherboard
does it have anything proprietary?
are aios with lcd even worth
How in the world
dont know man
if you’re asking this - no
I believe the motherboard is replacable
what’s the psu model
damn 😭 fr?
Like what can they do im not even that sure
?
it’s wasting electricity
ok, then I need to replace the fan mounted on my powersupply... this is the label on it... and the other I have spare of... they seem similar, but maybe not...any thoughts?
How is it not a steal
Not listed
you gotta find out
It's not really a steal but with ram prices it's not bad
thats why I said its not really a steal
anyways, if it’s a whole prebuild the price is ok
aslong the psu is fine
its what i'd expect to pay for the machine
Guess it makes sense
500W 80 Plus Bronze Certified PSU
Found this on the msi website
Wattage kinda low no ?
steal is what i’d consider a true 33-50% discount
4060 Ti is like $300 usd used here, so thats $600 for the rest of the shit... its kind of eh
just that?
that’s kinda sad for 4070 ti and i7
no model listed
The new prebuilt is going for 1600 EUR = 1870 USD here in Belgium
Which is a more than a 50% discount
if you want the pc really bad, buy it under the condition you check other listings if there is not something better
Dont want it really bad just wanted to flip it hahaha
In the market for prebuilts as I’m incapable of building pcs myself
flipping its not going to yield a ton
you’ll get like 10-20% out of it
if you’re a bit persistent
I just have this kind of autism going on in my head that limits me from buying PCs for some reason - if I cant get the best parts I feel like I wont have a great experience playing 😭😭😭
Or when I would buy a new PC I’d be like “I could have gotten that one instead of this one”
so buy the best parts duh
are you having a stroke?
don’t pay for AAA

and you’ll have the best experience
get like rdr2 at most with 75% discount and enjoy
modded games
My first pc was a ryzen 5 2600 with a gtx 1660 and I used it from may 2020 till june 2025
free indie gamws
dont know why I’m tweaking
Unfortunately
Where do you find this
i found out crimping rj45 is fun, my ‘tism wants to make business out of it
bought 100m of cat 6a wiring
Turn on dark mode
also my current vention cat 6a cables aren’t really cat6a so
I prefer light mode because I can read it better
too thin gauge
I read a lot of text and light mode doesn’t hurt my eyes and it looks better to me
which is fine at short distances
i just leave default
Has anyone seen a computer repair person explain what tools they like to use
i mean linus sells tools
And you should buy them
I mean try making your own?

And aren’t screwdrivers like the only thing you need for pc building?
he once spoke very highly of the amazon basics brand that's similar...in the launch video for his actually
making your own
it's on sale 🙂
I'm just saying it isn't amazing for the price
ANYONE know about pc fans WATTAGE? looks like I need to replace the 3.6watt one on my power supply, but can i go less wattage? or more wattage?
tc1 users are something else man
there's a difference in the channels?
I mean more people flock to 1
i don't hang out.. just show up when i got questions 🙁
Cop???? Or nahhhh
Honestly I'm at a loss for words
😭😭😭
If you actually knew anything about tools and quality levels you'd know it's actually a pretty competitive price for the category
And it's obvious you don't because you don't even know how many bits it can hold, which is 12. Approximately 10-11 more than you need for building a computer
The LTT screwdriver is great
I said it can hold 12 earlier
Why can't PCs move to torx as standard
No, you said "maybe 20"