#tech-chat-1
1 messages Β· Page 371 of 1
had a former coworker that worked there and they used the radium paint for basement markers, 60 years later they had all these spots "danger radium" still glowing
neat
they painted the faces on many many of those house and watch faces and dials
alot of the radium stuff doesnt glow proper anymore
thats what was scary about it
yea lol
On my way to consume polonium :3
the radium has outlived the phosphors made to make it glow lol
i'd suggest thats a horrible idea
they had a russian spy that poisoned by that and he didn't have a good ending
we love consuming alpha emmitters
the amount they found was like "only a government has this much around of this stuff"
I mean, if it wasn't rare we would have a lot more problems with polonium poisoning
Can I use my pc during Rain storm with occasional lightning?
gets out the ethernet lightning arrestor
if power outages/surges/flickers are common, a surge protector or UPS would be recommended, but yea its fine
Or do update the bios during that time if you like to gamble
i don't think polyphaser makes ethernet lightning arrestors
use fiber instead
is it me or is fiber cheaper than this box?
*they do make a lightning arrestor for ethernet *
oh yea i got one of those actually
i would think for 202 dollars youcould get two fiber converters and all the parts π
have $$$ left over
and/or medical certs
(piece of multi hundred-thousand dollar)
$200 is nothing in comparison
my friends house we did a gigabit fiber line between his office and the house and that was a trip itself
i love how for most household uses of fiber unless its damaged its just changing ends to upgrade speeds
look how fun this guy is
when he got the house they had to run a gas line and he had a trench dug and it was MINIMAL cost to run a 2 inch condiit from the house to the outbuilding
he already paid for the hole to speak
ah thats not bad
what is that thing used for?
imagming
send out readtion and see what bonce back to see what its made form
specifically its a gamma spectrometer
xray metal thing
and no. it does not send out radiation
they use at scrapyards?
its not an xray, nor does it send out xrays lol
is this pc a good starter gaming pc and do you thnk i can get 250 or 350 for it ( it would come with a keyboard mouse and activated windows 10)
Part List - AMD FX-6300, Radeon R9 380, Cooler Master MasterBox Q300L MicroATX Mini Tower
$100is to much
thats funny speaking that it cost more to build it
put it on the box and don't use a case and save half of its cost π
drives below board on top π
ah yes if 4790k costs $100 but $60 part is 2x the speed dose not mean its worth $100 to 99% of pepler
what is this machine being used for?
bro what
i would sell it for a starter gaming pc
4790k used costs about as much as 12100 costs and 12100 way better
that cant even open most games i play
also the only reason im using a am3+ board is because i got it for free
what is the max cpu that board takes as that seems a bit cheap for a gaming rig for one
not true ( i played decent of a intel core i5 2nd gen and a GT 730
mabe find a less costly case or see if a freegeek has a case you can haul away?
and i had a 2600k and fx 6300 gess what one was way better
ahh yess im going to get 150 - 350 fps from a LOW END gaming pc
its because i would need a another cpu anyways because idk the bios version
the fx6300 dose nto support command many games even ones that run fine on 10 year old hardware
i recall years ago we had pc shows that sold cases for 11 dollars that were so thin it was like a instant razor blade to work in them
i wish they still made these cases like this
the packaging weighed more than the "metal case"
Like i don't care about having a big side panel and flashy lights i just care about if its practical (good airflow, 5.25 inch bays, drive space)
gets out the 20 bay 5.25 bay from a amd 233 mhz machine
and those fractal design focus g cases are cool but ARE EXPENSIVE
You can get cases with many 3.5" bays still
must of been a cdrom tower or something as what would you do with 20 5.25 bays?
But 5.25" has gone the way of the dodo
i just like my disc drives and quirky controls i can there
my case still has a 5.25 bay, but i have a four drive 2.5 inch hot swap rack in it
just having like 1 mabey 2 just there incase you need it
At least with SATA SSDs you can let them dangle
velcro is a bit safer
i like to throw hdds
why can't we choose the option to either use the default ios notif tone or the 3rd party one?
my first pc build was a amd 233 with 7 scsi drives on it
some ios ones are bangers tbh
that machine had a very unique statup sound it due to how the drives were configured
the scsi card had delayed power or something where the card told each drive to spin up
due to a small power supply
Why are u opening a hard drive???
its likely old and or dead π
one loud click and a thunk later
your drive data is not properly destructed....let me help π
Now there will be no more clicks and thunks because u opened it
i
giggles and waits for people to guess what did that
any tips may have melted my 2080 super xD
ut oh
its oil from the thermal pad its fine and normal
except for the solder melting and parts falling off xD
???
where?
it's ok it's turding anyways
all over xD
nobody should cry avbout that drive, it was i think 100mb and we were having fun in my friends rural backyard with it
probably should send a photo of what you're talking about
how is the gpu working if the solder is melting?
looks up the temp that lead free solder melts at
per the google gods its 422F, id think the pc would shutdown long before that point
there gpu has burn marks on the board as in its brown
i dont know how it was hanging in
what were you doing to the card even, shunt modding it or sum?
nah playing wilds at 4k xD
i don't think it's burn marks but 
fair id send a pic but its currently at a mates as hes thinking of framing it
is that like playing doom on the fake pregnancy test screen?
(where the only thing resued was the case i recall)
id figure that the resister will pop first before that even happen. or there is a flaw in design that allows voltage overflow
id expect a trace to pop on the pcb first
does it look like this? https://www.youtube.com/shorts/-L_6qsNoH7I
??
magic smoke machine
your graphics card is not burning
under the thermal pads there are lots of components off
becausew they werent filled in the first place
likely the same pcb was used for several varuations of the same gpu
so not every bit would be populated for every usage
i have a the parts and can see where they were . . .
bro show us or just stop π
can you just send a picture of this?
i say again a mat current has it at hi scant take a photo
so which parts do you have exactly to come to your previous conclusion?
he doesn't need a thermal camera for that failed part
i had the gpu in front of me yesterday with all the parts
you can still find them, mostly on the likes of ebay, however they're never cheap
get a ammo can like this and make your own?
ok, ammo can inspired π¦
used a pc case to start with
best piece of advise i can think of for doing this with an actual ammo can....find a cheap pc case with the "Test bench" tray and save yourself a lot of time
is resting temp of 50C on my gpu bad? My CPU runs idle around 30C
are you using the gpu for anything? recall 30 plus series gpu's use the gpu for video playback
so it may not be "resting"
Just have AMD adrenaline, wallpaper engine, and disc running
Cpu is fluctuating around 35c
wdym?
Actually this doesnt seem good. GPU is that temp "idle" when its only at 3-5% utilization
nvidia did a addon to the driver called ...super resolution
not sure if amd followed suit
Possibly, idk. Im running a Rad4eon RX 6650 XT thats only like 1.5 years old
they did make a similar thing
Holy shit, i just maxed out my fans and they are so loud
mabe wallpaper engine uses it?
this is why my pc has noctua brown fans x4
even if all the fans are at 100%, its stupid quiet
See, when I orginally buuilt my pc I was around 15 and wanted RGB. now approaching 18, I wish I went more aesthetics based
my pc is a rack mount case and has no windows etc
Wait, I was 14 lol
most people look FOR my pc on the desk and then its like "oh its IN the rack"
i mean if you buiild a rack mount desk why would i want the pc on a shelf?
although do yourself a favor if you get slinger design ones, do NOT get the 15 inch one vs the 17
inch deep one
interesting
there both the same cost but unless you got a short gpu, you won't get the triple aio in it
in a 15 inch depth rack mount case
Have you seen the fractal design case with the walnut?
this is what i built my machine in
Thatβs what I lowkey want to build in, looks so clean
Sliger Designs is a manufacturing company based in the United States specializing in computer cases and systems.
the 1st one
im glad i didn't order the 360mm rad π
but the big reason this case is so expensive i recall was its a usa made product meant more for servers
why is my flex being positioned like this?
apparently it was supposed to slide out but i don't recall framing hammers in most pc builders kits do you?
It's more like itx size
my board is full sized and felt like building in a ammo can to assemble the pc
i ended up putting a noctua air cooler in this machine as that 120mm aio was like not happy with a intel 13700
if i would of purchased the 17 inch deep case i could of got a triple aio in there most likely too
Zip tie
nor thos
get a case with no side window and not worry about it?
i mean on the side of the case with cables
yes
or pretty much any store
i am broke af
They have zip ties at the dollar store
i have 36 cents in apple pay
How can you afford to build a pc where you care about cable management then
my grandma
thats what i do love about a rack mount pc, no need to worry about cable management inside it too much
Ask her if she can give you a few bucks so you can get cable ties
if it matters to you, it's part of the build
the next fun question for the pc here is how fast will a m.2 drive be on thunderbolt 3 π
Fast enough
i have a external pci express box with a 4x adapter card thats gonna take it
i have suspicions of 2200-2400
Max speed of thunderbolt 3 is 2800 mb/s
wasn't far off
About the same
That's the max speed, which you aren't going to get it every second of using it
i have three avermedia bolt capture boxes on the thunderbolt chain though so it could be lower
It will be, but nothing that noticable
alternatively, case with no clear side panel
Shave off a couple hundred mb/s but yeah still alright
the bolt capture boxes i think are no where near stressing thunderbolt 3
i think their max capture rate is 240 something
Ig so yeah
forgot of its bits or bytes that go with that number
Know that 8 bits makes one byte
*knows i've opened many of its videos and forgot i was playing a video when i try to interact with the on screen elements
But these speeds are still pretty fast
Compared to what am using in cat4 
Or used to ig
So what are you even doing
EXPLODE
Mbps is what it shows
sure
Mega bits per second that is
I need new flavors tho
yeah, AM5+DDR5 ram speeds are much more important, however with DDR5 being a slower overall standard you can only go so far before you end up reaching the limits of the interface
I might get the curry one idk that sounds good lol
*does the math and thinks i did it wrong, 32 megabytes a second ?
So it shows 256 mega bits per second then
I think you are π
every 8bits=1byte
uhuh
Yeah
that seems like such a small number to need the bus its on?
what
Am so confused
they require thunderbolt 3 to use them
what is this for
video capture boxe
Yeah what about it
avermedia bolt
And?
just seems like for the speed of the thunderbolt bus, its like not moving much data at all
That's not the right wording for that
it'll work just fine
i have a suspicion why this could not be made usb though
Eym
i had problems where the bios turned off enable pci tunneling and none of them worked
until i corrected that
usually capture cards are pcie bc they need to connect back to the original pc
But he is overcomplicating the entire thing
thunderbolt 4 scares me
it shouldnt
esp on laptops
how they dropped the certification for it for ALL functionaltiy
3 i recall intel had to bless it and all functions had to be there, 4 is not
why does thunderbolt 4 scare u
i would love to find a inexpensive laptop with thunderbolt to use these boxes not at at the desk
but when they went self certication apparently they did not requre all thunderbolt functions to be working
just seems like a "will this work" nightmare
Hey guys
isn't the main idea of thunderbolt 4 the transfer speed and current support
Do yall have any discord server recommendations Iβm building my server and Im looking for things I should do
speed is thunderbolts main selling point but that tunneling thing is also nice
as it lets pci cards outside the machine in external boxes
i think i have thunderbolt 5
its a neat tech but whew are the cables expensive
last one i got was 36 bucks for a 3 foot cable
Yeah..... Nah
That's absolutely not even close to true
i mean when ur getting like 6 different cables in a single package yeah its gonna be more expensive
You are getting confused between USB4 and thunderbolt 4.
ppl when number
I have a large assortment of various thunderbolt accessories and cables, as well as different converters and USB C cables etc.
USB C is a connector and wiring standard that supports USB 1,2,3,4, display port, audio, thunderbolt 3,4,5. Simples π
Is it normal for a rtx 3050 6gb to reach 78 degree celcius on 100% usage?
your starting to see it more in lower cost laptops now at least
does any one a fix for black screen, it froze for a moment when I was messing with a msi afterburner then it shut down completely before restarting itself but screen remains being completely black
Yes, that is entirely expected
I wouldn't bother buying a laptop that didn't at least have USB C charging and DP/USB3. Thunderbolt/USB4 isn't entirely necessary, but it's nice to have.
its very nice to have when your desktop has them
in use
3x avermedia bolt capture boxes and a pci express to thunderbolt box
Also there is no visible difference to a user between a USB C dock which uses USB3/DP and one that uses thunderbolt as a transport to run DP and USB3
although that 3rd box is sota wasted on my cable tv box
Try ctrl+shift+win+b, it reloads ur graphics drivers
If that doesnt work, shut down your computer and turn off your psu for 10 seconds and then turn it back on
just received this notice from Hyte, oof
is the rule where items under x still in effect ?
deminimus rule
but i have seen the price increase in places i won't name here where items were going up by 3-4 dollars or so
hey so I have two tv's hooked up (B9 65 inch and C4 42 inch) which are both 4K....and one LG monitor which is 1440. How come when I select 4K resolution under nvidia control panel or windows settings the actual real estate of the 4k tv's becomes smaller.....what am I doing wrong?
the actual real estate of the 4k tv's becomes smaller
What does this mean? Taking a photo of the TV's or a screenshot may help, though it might not.
are they on a hdmi splitter?
or is each output connnected individually
splitters often will only connect at the LOWEST size which in this case is 1440p
which dlss version on rtx 3060?
its not good
down to game
https://pcpartpicker.com/list/6nwY8Q what can i change about this?
Part List - AMD Ryzen 5 5600X, GeForce RTX 4060, Corsair 4000D Airflow ATX Mid Tower
you got those parts?
nah
or getting them?
4060 is dogshit
the price is dogshit
DONT get that cpu/board costs way to much
Get AM5
alr
whnever i try to find one on pc part picker it wont let me use anything but am4
since you have am4 board or am4 cpu it will not show non am4 things
its the comapblity filter
Home sweet home
now where is 128 chunk render distance
12
get the prewar house from fallout 4 π
I'm using ray traced shaders. Non ray traced shaders are no longer acceptable
at least its not a cardboard box, their was a funny craigslist ad for that π
"apaartment for rent prime downtown locaiton" it was a freezer box π
on a sidewalk
We have to schematicannon our house
That's literally just a box that keeps monsters out
guys i need psu advice for 3060 pc
800 will be more than enough
i tought 550 will be enough
I have a 4070 and r9 5900x and would have been fine with 550
wow
which psu should i get? from C tire?
I'm only talking about real world experience idk what the "proper" answer is
I never draw more than 430 watts
Seasonic is a safe choice
I have an rog THOR 1200 which is actually manufactured by seasonic
in my counrty doesent exist. here i can get deepcool, huntkey, some msi,
can anyone help me identify this gpu?
i changed this is it better now https://pcpartpicker.com/list/PCmmRV
Part List - AMD Ryzen 5 7600X, GeForce RTX 4060, Corsair 4000D Airflow ATX Mid Tower
did u ask chatgpt?
MSI likes to tell people to surpress reviews and I've never heard of the other 2
Do u have any computers you could stick it in?
deepcool psu?
not at the moment
ill set up my old desktop and check tm
Sounds vaguely familiar. Look at the reviews
an ATI Radeon HD 5450.
Oh wow lol
because i wanted to know what it was
same difference lol
Oh no yeah its a 5450
Yeah slightly better ig...
Lol
ill stick it in a desktop anyway to make sure lol
To make sure it's edible
Yummy 2 FPS
No you are edible
π₯Ί
π
Wth is all this? I just wanted to connect to my wifi π
You went too far bro
Huh
Linux user connecting to wifi
Real
I don't know
Network parameters and names and stuff
Some bullshit
Most of it is done automatically by ur devices
My explanation is better
Perfect bluetooth & wifi antenna placement?
It's random shit you shouldn't have to do
oh.
π
π
guys i just downloaded call of duty off steam i first downloded 93gb and then 50gb as an update and 30gb to play warzone someone please explain?
Big files
That's what you get for piracy
Launcher, game, textures
Do the crime do the time
basically how it goes
hmm was downloading warzone from battle.net better than steam?
He said he downloaded it from steam?
That's what they all say
Ah, fair
cod warzone is free bro
But then after hours of coerced confessions they say they pirated it
99% of the time it'd do the same thing
Steam is better; Linux
ok
downloding cod is a drag fr
guess i will play along
Will a cable extension hurt audio quality for iems
the AI says no, so does a reddit post i found
after having to send the serial number + invoice to JW to get the code, i still need to wait till i get the rest of the parts & get JW to install it (my mum won't let me do it myself, so it's another $200 to spend) to get MH Wilds from AMD
i don't either, this is duckduckgo's ai thing
it came with the browser
might depend on the quality of the cable but i was using cable extender for my headphones the quality was so shit and it was making background noises
But like i said might depend on the quality of the cable cause i bought the cheapest one i could find
could it also be the length? like with an internet cable?
if you go too long you'll start to loose quality
might be mine wasnt short
Search engine
Tier lists
Tier list is love, is life. β€οΈ https://cultists.network/140/psu-tier-list/
Okay okay, no tier list is perfect, and some are even outright wrong. But this one is generally good.
many recommend this tier list too https://docs.google.com/spreadsheets/d/1akCHL7Vhzk_EhrpIGkz8zTEvYfLDcaSpZRB6Xt6JWkc/edit
its a tier
there
A tier PSU for 95$ worth?
well, do you need it? are there cheaper (possible "worse") alternatives that meet your needs?
idk i need tier a psu for 3060 build?
or should i go C tier?
yea c is enough unless u wanna upgrade the system
in which ill assume am5 then yes itβll be worth investing into a A tier psu
max i can upgrade 4070 super or 9070xt somthing
if you have plans to go 9070xt get a A tier psu with like 750-850w
then deepcool pq750m ?
but for 95$ its not expensive?
A tier
What?
Some psus in our list are B+ due fan choice
ok
What country
I wouldn't buy anything other than A tier
But that's just me, I don't like buying cheap things
uzbekistan
Doing the next ai training, I hope it goes well lmao
hope its not a raciest AI
if it is, then it was magically made racist bc I filtered that shit out XD
since doctors made one before that was and the funny part race was not even a in the data it was fead
I need to give it more data tho, it has only 200k samples
its my custom ai
mine is being trained off of twitch chat
XD
oop, warshipped
deep fake cor?
at least you have access to a lot of information most don't π
we're using that tkinter program π₯
garbage in garbage out
this is twitch chat
uh oh
Why does WIndows have a better version of PowerPoint compared to mac
the way it works is, I give it a list of channel URLs, it checks to see if they are live, if so, it joins and takes every comment from each stream, filters it with my heavy filters, then gets stored in the raw data file, then when I clean it, it also goes through a different filter removing other stuff too, then it gets trained
this is my current URL list lmao, i just copy and past it into my program and it just works
lel
is it open source?
it will be once I get it to a beta
once I get the ai to train correctly, it will go into beta
everything else works good
train it for cnc
then i be impressed
the best i can do rn, is gibberish
?
LOL
I need more data lmao
Holy then yeah
I got no idea If that market
200k samples isnt enough
1sec benchmarking microsoft office
Msi A750GF - 105$
PQ750M - 95$
run PYPRIME
screnshot
both A tier
Pqm
seller fist said 90$ then he said wrong price then said 95$π
what is wrong with ppl
On Mac I think I am better off using PowerPoint web
:3c
c
:3e
real
e
Btw my brother put some load on the PC (playing games) and it only ever hit 50Β° C
w
The game was sorta CPU intensive
why does userbenchmark look like a fever dream and why do i nesd to shoot spaceships to benchmark and at the end theres mozart playing
The 1050 Ti only got to around 40 iirc?
Highest I personally saw was 28Β° C on task manager but that was during idle
Hhhh I need to DDU this thing
anyone know why my fan 2 is spinning 4x as fast?
itβs legit so loud
i can hear from other room
uhm
why are you using evga software mostly made for you know evga cards with uhm not a evga card?
did you do anything to the gpu or did this just happen one day
tell him βi mustve gotten the wrong listing thenβ
evga software just to look at my fan speeds it happened as soon as i plugged it in
bought gpu 2nd hand
Brother should've just owned up to his mistake and said "yes it's for 90"
idk, its not a good model yet, it has more kinks than working parts rn
if you are meant to use anything use afterburner
Portable gaming devices are cool
that doesnβt fix the issue
but can you also answer what i asked
this
oh sorry
nice collection!
i bought it second hand happend as soon as i plugged it in
can you take a pic of the top of the card
Thanks, gonna mod the psp and psvita soon with new hardware
damit the 2080 fe does not have a warranty sticker
nice
Was thinking on modding the PSP with an IPS screen upgrade and both getting an USB-C port upgrade for charging so no need for proprietary cables
try pressing auto in the software
cool, when you mod the vita, PLEASE play minecraft vita edition
bruh, they wouldnt cover it anyways
auto does same thing
I mean, I already have the vita and psp software modded
but at least it would be easier to see if the card has been opened and the fan cable not been plugged in as it should
I just mostly play Project Diva and Rayman Legends on ot
what could possibly the cause of my cpu hitting 90c recently
its a 14900k
close enough
was it 13900k
yes
eh same thing
you need the gooch collector to clean THAT up
14900k, is 0.2% faster tho
i have a question for everybody here
anyways 90c is good
who knows the greatest technician that's ever lived?
90c isnt good lol
it is for a 13900k at full load
should i put the tubes at the top?
so i can flip my screen the right side up
why not just keep the RAD tubs the same place but the pump tubes down
because it doesnt fit, thick ass tubes
BALD, BALD, BALD, BALD, MY EYES!!!
mount the rad on top
not possible
it is
only 140 mounts
what was it 10000D
yes
wow that is a sad case
Why
it costs so much but you cant even mount stuff, it even is able to as it sells thingys so you can mount 240mm rads up top
welp good luck
15$ for a 8x120 bracket
so tubes up it is
Might need a new keyboard woke up to my keyboard spamming the 6 key and making the video I fell asleep on repeat the same spor over and over and over
how much was the case again
no
499
500$ case and they cant include a 5$ bracket
jaytwocent said its fine
no
press the 6 key if no work replug if no work replace the key
y
air
does it blowup
no but it can become loud and give bad performance
how long until it dies
many factors
hm
Yo sim, can a 1650 fit a HP ELITEDESK G4 SFF
is the 1650 also sff?
well LP
i think you know the answer then
very sad pc
Yeah
that would need a single slot lp gpu
I think my PC is being a bit wonky by being TOO cooled
no
https://discord.com/channels/375436620578684930/1357996063272730745
if anyone wants to pitch into discussion
unless its under the dew point its fine
What's the dew point
idk why it started sapazing out if i unplug and replug it just starts again pressing 6 dose nothing and with my keyboard unpluged it dosent spam 6
its possible
The dew point is the temperature the air needs to be cooled to (at constant pressure) in order to achieve a relative humidity (RH) of 100%. At this point the air cannot hold more water in the gas form.
No idea what that effectively means for me but alright :3c
water in pc
What to do if my uclk and fclk is not One-to-one or one-to-two?
Fair enough
Although what I meant is
30Β° C in idle lol
Highest I've seen under load yet is 45ΒΆ
@tidal geyser nvm i got it right side up either way the tubes down
i want to run a minecraft server on my nas pc but it has a intel core 2 duo processor would it be bad to use that as a server?
Maybe use a computer that is from this decade
if i had a mobo i could do that but unfortunately its so freaking expensive
It is not expensive to get a computer from this decade
mobos are expensive i have all the other parts except a mobo
I have r5 2600 r3 3100 1070ti rx 550 rx 570 2x8 gb 3000mhz rams 650watt psu with case lots of drives
but not a single mobo
i wonder if i can get a mobo in a trade with rx 550 rx 570 r3 3100
A (insert cloud provider here) free tier VM will be 1000x better than that
there are free vms?
no way
Yes
GCP AWS and Azure all have free tiers
Digital Ocean gives you a sizeable credit
thank you i will search them
I'm pretty sure you could find a laptop on the side of the road that would be faster
Well yes
thank youu
is Cooler Master MWE v2 good?
Bronze/230v?
Gold?
guys
should i not play games till my artic mx4 arrives on 10th april
Bronze/230v
this laptop?
230v bronze is solid for budget builds
Ranks as C tier
idk can i say my build budget, its ryzen 5 7600 rtx 3060 32gb ram 990 pro
Its enough for 3060
4070?
pc
i use this !
Bronze
Enough
any issues?
nope
9070 xt?
im using 450w version with r3 2200g and gtx 1650
what parts
ok
noise?
idc about noise
but i use ceiling fan which 99% of the time is louder than my pc and im used to noise so it doesnt matter
100c is too much for PC
101C
Heh sure but
Quality wise no
for laptop normal
The thing is mwe v2 bronze and mwe v2 bronze 230v are different
get some ag400 its best price performance cooler
They use same platform but yhe difference is enough to mark mwe v2 bronze as B
Yes
My pc case has no fans and is very small
i found for 40$ new
Cooler (cpu) surrounded by psu cables on all sides
what lol
what case do use
case also need air
airflow
dont say u are using cheap office case has 0 airflow
Frontech jil 4195
π
Gang anyone just curious what would happen if you use a thread ripper in a PC and maxed out the multithreads Chunk loading to all of the threads on the thread ripper
Like the most simple answer would be you'd probably load all the chunks at once, or really quickly
But we don't know for sure
I mean you could try it, but I mean, it just seems like a horrendous waste of time and money
It sounds worse than the Google Cloud V1 TTS
whats this
Youtube auto-dubbing
anyone know a wifi card for this pc https://uk.pcpartpicker.com/list/svQqPJ not mine for a friend
Part List - Intel Core i7-12700K, GeForce RTX 4060, NZXT H6 Flow ATX Mid Tower
hsve they bought all the parts in this ?
yeah
sadge, if they didn't, for what's in the list they could have gone with some better parts choices tbh
wasnβt me who built it tbh but like what if i can ask
wifi card wise, well, they could get and install this https://uk.pcpartpicker.com/product/6MjBD3/
Can anyone help me with my pc that takes forever too boot? its freshly built with a 7600x and rtx 5070 with a m.2 ssd. The thing that takes forever is the motherboard cycling through everything...
thanks bro
don't want to be rude or something but there's an mx-6 version already
https://uk.pcpartpicker.com/list/csC4wY way more performance and storage for the price tbh
Part List - AMD Ryzen 5 7600X, Radeon RX 7700 XT, NZXT H6 Flow ATX Mid Tower
does the difference between artic mx4 and artic mx6 matter
this is my pc case, it has no fans and the cpu cooler is surrounded by psu wires π¦
hi rauko
1c difference, and not really, though mx-6 competes with kryonaut without having to redo it every 6 months
mx-4 is perfectly fine to use daily as it is
sup dude
chatgpt said kryonaut is not long lasting compared to mx4
Is that true
due to pump out and how long it takes for curing, yeah, it's why kryonaut is designed more for XOC use not daily use
i see
my cheap thermal paste caused cpu heating again in 10 months
I hope MX4 doesn't cause it and gives atleast 2 years
if it's true mx-4 and not the fake stuff for where you are it won't, and tbf you shouldn't ned to swap out the past any shorter than 2 years with mx-4
how do i know if its fake
i ordered from here
i would say, it depends on the seller, did you get this as a fulfilled by amazon item ?
how do i check that
plz dont look or tell others if there is accidentally personal sensitive info in the screenshots
usually when buying it, it'll show this
yay
i found some ram with 6400 jedec
i never understood the difference between fulfilled and un-fulfilled by amazon
what is jedec?
i also heard edec
yay we not getting low speed jedeec
fulfilled by amazon = direct from a warehouse they have, the ones not marked like that are from the sellers own stores
jedec is who made spec
and we call there bins jedec bins
dude you can get 8200 jedec spec ram
yes now
SEND IT
intel primarily
SEND ME LINK
max mainstream ram speed ?
and how much do AAA games need?
Is DDR4 3200mhz fine?
intels 285k max is 6400 with cudimm for suport
what cpu?
why does it matter with my question
how much ram speed do games need
ok want help or not
just curious dont need help with pc, okay uhhh lets seee...im planning on buying a ryzen 5 in some years so uhhh ryzen 5 9600 !
get ddr5 6000
ok
since if i say get ddr5 8800 since that fastest and you get not 285k with very good board 100% it will not work with r5 9600
ye d5 6000 for am5 cpu's is goated
woow
and you can get ddr5 8000 working on many 7000/9000 cpu's but its offen not faster and more of pain then worth
told ya it was possible
1:2
yep
is sad
yep
i seen some user runining 6600 and i ask them to send image of zentimings and i said i think its going to be 2:1 and they said no its stable
i kinda wanna try 6600MT on my IMC
its doing 6400 so maybe
its kinda funny how insanely ram dependent fornite is tho
Why is this keyboard 600β¬ π
allso funny how 4790k gets better lows vs out of box 13400F
Better yet how the fuck is it 600β¬
6400 running 1:2 in fortnite the 1% goes to 60 while 6000 1:1 did like 180 i think he said
that game is just wow with its engin
is undervolting CPU , RAM and GPU in PC bad
why
Undervolting RAM bruh
I undervolt my motherboard usually
rog
Rog peripherals aren't usually this expensive
rog mouse pad is 60$
Quality mousepads are usually in that price range or more expensive not sure if the Rog one is quality tho
dont mouse pads usually only cost like 2-4$
mousepads are usually 20-30$ on the cheap end while still having some quality to em
thats expensive
https://www.pcworld.com/article/2312798/pc-memory-gets-faster-safer-with-new-ddr5-standard.html#:~:text=JEDEC%2C a key chip standards,pushes speeds up to 8800Mbps. seems it's gone up to 8800 now for jedec specs
ok they made the spec higher and i meant yay i not getting xmp kit and the jedec bin is 4800
why and how are you undervolting ram
we're not long off getting 1000mt/s ddr5 due to this you know
in the bios
to reduce temps
actually forget ram
just cpu/gpu
yes
rip apart the case and throw it out the window
maybe time to move the parts out of the DIY pc case made of cardboard
absolutely pointless on ram for doing that tbh, i can understand cpu at least but that in itself depends on what cpu, as for amd any cpu past zen 2 there's no safe voltage to OC with so you do it via PBO instead
CPU understandable to get a better cooler but if ur gpu is fked all u can do is get more intake fans lol
other than UV
i want u to upload this file to https://hw.47c.in
THis is me playing RDR2 for few min
what
time to do repasting of the gpu, and quite possibly redoing the pads on the gpu tbh
replace paste with PTM
what is ptm
your ram isnβt hot unless itβs unstable
both my cpu and gpu are at 100C
honeywell ptm7950, phase changing paste
show hwinfo
i also want a pic of this pc
thats literally what i showed LMAO
show hwinfo temps not a csv file
i aint clicking that
the csv file is logs of hwinfo
CSV injection attacks occur when an attacker adds malicious commands to a CSV file. When the targeted file is opened in a spreadsheet program such as Microsoft Excel, the spreadsheet program will execute the malicious code.22 Mar 2024
thanks for the prank idea, my friend will never see this coming
wraith stealth easily
ip grabber
ITS A 2200G
pleas screw in the cooler also does it even have thermal paste
fk this internet
i last re-applied thermal paste in may of 2024
It was hy510 thermal paste, 1.93 W/m-K
screw the cooler?
Its already screwed?
harder
its difficult to work tho, very small working space, the psu wires get it in the way
but fine i will do it when my dad gets time to help me
so remove ity
remove what?
" psu wires get it in the way"
ok i will remove the psu
i have noticed problems with my PC:
- shit thermal paste, applied 11 months ago
- shit case with no space
- case has no fans
- stock cooler
- 1 fan gpu
- psu wires decrease space
stock cooler is plenty
That's basically toothpaste with that thermal conductivity
maybe its time to yank the fkin pc case out the window
i do wonder, was the side panel on when you played the game
that air is not moving anywhere
replace the case and thermal paste and it will be more then fine
no new cooler then?
uhm that cooler can do like 100w
And use some actually decent thermal paste
that
thermal paste or ptm
mx4
another problem is that im gaming in the middle of the sahara desert
i have gotten the new paste
xd
actually i was joking about the sahara desert part, but holy fuck its still 34C outside
what the fuck are Samsung monitors
I thought the right side of my monitors backlights were dead
I reset the monitors settings and now they're working again???
Before and after
my first gaming pc i built when i was 12... cant believe i put the cooler fan the wrong way round lmfao
Classic mistake to make
how do i know if my cooler fan is in the wrong way
hey, so I got my pc built at a store and its been a mess, so first the gpu was fucked and it had many bugs but now thats fixed, i took it back there and they fixed it and connected it to their monitors and had it sorted out for me, but now my monitor's screen goes black in random intervals and gives me the "display port" on the top left, (they replaced the gpu and swapped it out)
who uses radmin vpn need some help
its for a test to see if my project works. its called "Radmin Friends" i will later turn into a playnite addon. for now its a simple script that notifies when friends are online/offline (burnt toast and sound)
Also very basic brodcasting untill use playnites api
Guys are wireless headsets worth for gaming becoz when ever i turn on vc that sound gets a lot cranky
shit motherboard
looks to be using the wrong screws
@tidal geyser Do i need to repaste my gpu too
i believe 21?
Damn
Should I get a ryzen 7 3800x or a ryzen 5 5500

Poop vs poop
Get a 5600 and you'll be fine
why does nobody ever recommend the 5700x
cause 7700x is priced competitively and is on a better platform with an upgrade path
people did recommend the 5700x when AM5 was still in its infancy and was more expensive
it still costs a bit
100$ for a am4 8 core cpu or 300$ minimum for am5
and that low is only for mc
like what 350-400+ up to where you are
How much would you guys pay for this
7$
coz it sometimes could be more expensive than 5800x
i'm serious lol
but personally Iβd buy for 1.2k
This almost sounds like someone bought a prebuilt and ripped out the 4090 or 5090 and is trying to sell the skeleton
Like 600 bucks
Kek
He has it listed for 1.2
personally tho Iβd offer 800-1000 range
oh yeah bro definitely sold the 5090 separately lmao
(Disclaimer nvm thatβs not a 5090)
That's very cool
how should i put fans in the nzxt h6 flow i will get 2x140mm for the bottom and 1x120mm for the back
and a 360mm aio
does anyone have any recommendations to make anything cheaper cuz my buget is 1.6k π heres the link https://uk.pcpartpicker.com/list/YKYmRV π
i still need a SSD, Case and power supply π
- Why is your motherboard so expensive
- Donβt pay the gray markets for a shady windows 11 key. Check your DMs.
- Do you need a keyboard mat right now?
- Oh youβre paying the white pc component tax arenβt you
gg
Part List - AMD Ryzen 7 7700X, Thermaltake View 270 ATX Mid Tower
readd your video card, you may be able to get a nicer one with the money i saved ya
you have 500 gbp to spend on a graphics card
Hi guys i found 2 gpu at the same price ehich one i should go?
The asus prime or the msi gaming trio
im kinda of the type to spend more for a white pc lol
then do that on your own time and dont complain about budget
fuckkk why are my negatives dirty
I had almost the same question the other day, Asus prime 5070 vs PNY 5070 for my friend
Seemed to me like both were about the same. Went with Asus cause of the dual bios (nice to have), and cause they were the same price and my personal GPU is Asus as well.
Up to you, if theyβre the same price theyβll probably both be fine.
Whichever looks better lmao
i have to get the cleaning process right
I was thinking going with the asus one, because I have the psu asus too, i dont want all the part be different
The only thing is different is the b850 gigabyte
Can I fit Arctic LFIII 360 to H9 Flow?
yes but why would you buy an h9 flow
what would you buy
a view 270
then at least i'm not spending crazy ass money and still getting a nice looking case
Why not? It was cheap
how cheap
100 USD
still wouldnt
What to buy then
i mean do you already have it?
No
it's a fine case it's just too much money and too much space for most
Oh
this is the view 270
Would it look empty you mean?
$70-90
unless you spent hella money on a ton of rgb fans
I dont have RGB fans
I dont plan to have
(7 bucks each)
which
Hello :3

