#cars
1 messages · Page 113 of 1
I'd use a rotary generator if they existed
putting in a car would work just fine
man I just miss the Furai
ah no im not doubtful about rotaries
ev onwers already think their cars are 100% maintenance free
you really think those dumbass people will pre mix their fuel
im just doubtful of them bring another sports car in production today
I think anyone buying a rotary already knows what's up
CX series are shockingly decent
cause the economy is kinda shit and the market for sports cars is sorta saturated atm, no?
normies still buy fancy cars even when they dont know shit. thats why so many ruined rx-8s exist
"thats a cool looking mazda. ill buy it"
mazda no doubt would do rotary generators, don't they already have a car with one?
Midrange-high end sports cars yes, lower end cars where miata and sfr sit I'd say no
ye but this car would be a mid to high end ish one for sure
then again... if the RX7 made a return as a hybrid... yea it's gonna be considered mid-high
yeah which is why it'd be kinda a troll businesses decision for them imo
we live in a world where a fast yaris can cost up to 60k. its gonna be high end
I guess all we can hope is that Mazda perfects the rotary before then
which is why i doubt itd actually go in production
i really hope it does
i just doubt it will
sorry typing on mobile
me when pontiac was on the chopping block but they announced the g8 ute
that yaris is derived from the rally cars I don't think it's fair to compare it to say, a base model yaris
same way I wouldn't compare a base model corolla to the gr corolla
Toyota actually does stuff with the GR badge that's past aesthetics
cough literally ever german brand ever
i mean if you go back 16 years to 08 my car has a poopy eco version but mine uses alot of tech from time attack cars.
it still only cost 25k new
and you can get a K24a in the Honda odyssey
an engine that when built is capable of 1000+ hp
but a GR yaris is much closer to those rally cars than to a base model yaris
My point is that the Yaris is legit a street legal rally car
it makes sense it's gonna cost a lot
cobalt ss is a homologation car for SCCA its also the street legal version of its race car couterpart. and it was dirt cheap
it's also american
using mostly opel and saab parts
I mean with that argument you could also create a case for the Dodge Neon SRT4
MSRP of 20k
Because GM
i mean its almost the same argument. they were used in scca and other forms of racing and some teams had factory backing
Yea
Tech in that Yaris is far more advanced, though.
Like even the GR Corolla is what, 37k without dealership tax?
they are 50k used rn near me
well that's cause everyone is fighting for them
and paying that stupid markup
it's not supposed to be worth that much
one of the few cars that appreciated in the first year, somehow
it is but if you consider the era the cobalt ss was also very advanced for what it was. they came out of the box with launch control and boost by gear. and the syncros are specially made to handle flat foot shifting all in 08 for 25k
which... is perfectly in line with what it would be worth now
same as the GR Corolla, equally advanced tech for its time period
i forgot to mention im in canada so its cad
Ah
Well it's somewhat close
calculator wouldn't take exchange rates into consideration as well as other stuff
the one thing is though cobalts never ended up with a massive markup. dealers actually couldn't get rid of them even though they were setting records
2007-2008 had the Canadian Dollar actually matching or exceeding the value of the American dollar
same as 2010-2011
wtf happened to the world
then it's been downhill since
that as well yep.
Too many factors to list. It's all bad though
so your 25k CAD would've been = 25k USD
so it'd be 36.4k USD now, which is just under 50k CAD today
argument still holds true, Cobalt SS is like the GR Corolla and priced basically the same MSRP wise accounting for inflation
GR Yaris would've been one step above that, and demands a premium above that as well
but yea shortage and dealership markups suck
guys can someone help me i think i broke my car
So i was trying to change sun visors and i did this
now it will drain my battery whenever i touch it
you fucked with whatever detects the visor being open
Yeah
Its the cable yeah
i lost it
How can i take it back from there
now its turned on 24/7
pull the headiner
Is it a hard thing to do?
depends on the car
Volkswagen Golf / Tiquan Steps to Fix & Repair Sagging Roof Lining thats falling down & detached from the ceiling.
► First you need to remove the headliner (IN TODAYS VIDEO)
► Then recover in new foam & fabric https://youtu.be/kZ_bICRvh-Y
► Then reinstall (VW Jetta Clip) https://youtu.be/ytHSZO-4SEI
► VW Jetta Headliner Removal includes sun-vis...
you dont need to get the whole thing out
just the front so you can bend it down and find the wire
@
@violet meteor
ok thanks
Blowby, nah its a inbuilt steam cleaner
Testing out legal H4 retrofit LED
straight to hell
People just need to save up for retros 
the stock housing before mods:
it can be done on anything with wheels
you have to make them yourself
The Worlds Biggest Supplier of High-Performance Lighting Upgrades for Cars & Trucks |HID | LED |Bulbs & Complete Kits | Projector Headlights | Fog / Tail Lights | Halos
oh
yeah that's the kind of project that I'll start and never finish
https://www.theretrofitsource.com/bixenon-morimoto-mini-d2s-stage-3-crk-d2s?quantity=1
you can put bi xenon projectors in a geo metro if you wanted too
@dawn glade
yes
damn
well... I'll check that out once my heating system is done paying I guess
you can see like 600 feet down the road with retros
and because they use projectors they have a cutoff line so it never blinds anyone
oh nice
that was my concern
well the higher trim of my car comes with projector
sadly wiring and connectors are way different so it's not a direct fit
maybe there's adaptor tho
I should look for that
really nice defined line
love that
as long as there is the same ammount of wires you can just chop your connectors off and put the ones you need on.
im gonna be doing that with my volvo after i fix it
it has shitty plastic lights so im changing the wiring for the pre facelift lights made out of solid glass
yeah sadly there's not
I have h4 on which daylight are handled by the bulb
on the projector model, daylight are some led strip under the projector
maybe I should try to find the pinout for both and just yolo it
just wire them together and make them run at the same time
might try that
its the kind ofproject you can make yourself have no choice but to finish
you can buy a second set of lights to mod or use the ones alreadt in your car.
if you use the ones you have you cant drive a car with no lights thus you will finish it
a second set is definitely needed here for me
Got 2 new Hyundai’s within the past 3 months for my fiancée and myself. A 2024 Santa Fe Calligraphy and 2024 Kona Limited. Got them both fully wrapped to protect the paint. These were the original colors.
After the wrap, they are space blue and paprika orange.
hey you here?
Will taking off the headliner affect sound isolation of the car?
not unless you plan on driving with it fully removed from the car which i said you didnt need to do
Yeah its not fully removed but i can tell its not 100% glued
nah I hate these even properly installed
they work under the presumption roads are made level but constant elevation changes here mean you do get blinded by them and it is like a flashbang
its fine
honestly thats just the people who put the lights in not wanting to make sacrifices
i sacrificed almost 1/3 of the range on mine so that the only way they blind you is if im coming over the crest towards a 15% downhill grade
I like soft cutoff lights as its less like there is crazy people behind you every speedbump
i bet all of those were bmws 
I see it alot from VAG cars and mercs.
the VAG stuff the auto levelling seems to go to piss on turning their dipped beams into high beams
how headlights should look
@misty mantle

Damn i just found a sad fucking picture from when i was in Detroit
I was inside an abandoned gm factory
@misty mantle
Cobalt SS?
yup 05 or 06
i think it was a 0 mile unreged car
Still sad to see it like this.
no
Maybe if there is a light on the dash and from stuff like dimmer circuitry, but it should be extremely small amounts if it's even measurable.
Depends on the lights that're on that circuit. if it's just that dome light, then no, it won't
If it's the dome light and backlighting on the radio, HVAC controls, and cluster, then yes
A couple of guys in a different server I'm in were just arguing about trucks
💀
⬛️ Black 4.0 (Use Code DYCBLACK for 10% OFF) - https://culturehustle.com/products/black-4-0
🚗 Shop Our DIY Kits - https://www.dipyourcar.com/pages/main-category
❤️ Please Subscribe to DYC!- https://www.youtube.com/dipyourcar?sub_confirmation=1
👍 Join our FB Group - https://www.facebook.com/groups/DipYourCarCommunity/
So apparently there is a n...
This is the hottest shit I've ever seen
So unfortunate this doesn't last longer than a day
1986 Oldsmobile Incas Concept
engine: Quad Turbo Inline-4
power: 171.5 kw / 230.0 bhp @ 5600 rpm
driven wheels: Transverse Mid Engine / 4WD
oof why can't we live in a future where all the cars looked like this
Look like a weird DeLorean kinda
Isn't any picture of Detroit sad?
no lol
Detroit is full of cool cars
@bitter compass
corvette inside a mcdonalds built from an old car dealership
Cool cars doesn't mean it isnt a sad looking city
im guessing youve never been then
detroit being a dying shithole is something said by people who have never been there
detroit is nicer than Montreal
Tbf i think every American city is ugly
A brand new nuggggg
takes like 8 coats to get this effect though
Mirage GT with big blue flakes
120€, Osram ones
Nightbreaker LED H4 (retrofit for reflector)
can a broken brake booster cause the engine to run lean?
Hey @misty mantle @hexed kayak I ran it for 10 minutes on the hose, then changed the oil again and ran it for another 10 mins and it sounded smoother BUT
Near the end it started making this kinda high pitched noise as can be heard in the video
Could it just be something to do with the jet because it’s not fully submerged in water? Or something more serious inside the engine
scary noise . could be something minor like a pulley. could be real bad like a crank or cam bearing
I don't think these have belt drives on them
everything should be gear driven
🥺
I would get it out on the water and see if the noise continues
This is what it sounded like just a minute before, that squealing noise kinda slowly got louder
Can be if vacuum operated
Yeah that’s a good idea
if it does its time to pull the oil pan and valve covers
check for scoring on the cam and crank
tf kind of rotax motor is that
Honestly, I'm not suprised.
All the rotax engines I've seen are 2-strokes
@wraith rivet
Dudee those jet boats are so sick
Idk 😭
Speaking of, this one a 3-cyl efi?
all I can tell you is it’s a 2018 seadoo GTI SE 130 with a 3 cylinder NA rotax
It’s direct injection
Ok, so it is EFI
di just means it puts fuel in the cylinders instead of the intake ports
I'm tryin to save up for a jet ski, gonna be working 5 days a week once I get out of school
What does EFI stand for?
Electronic fuel injection
Ohh I thought it meant external fuel injection for some reason 😭😭
non direct injection
Direct injection also means that a lot of carbon can build up in the intake ports
its more commonly called tuned port injection since it injects fuel into the intake
Ah I see
true plain old "efi" is just a carburetor shaped object with a couple fuel injectors instead of jets
And then there's port injection with the injectors on the intake manifold angled at the intake ports
Though I just realized Bob already mentioned that
So you guys just say I should take it to the lake and see what happens
Yeah
If the squeaking stops, it was just the jet drive. If it continues, the engine is probably fucked
Hopefully it's option A
If The noise is cam related that woukd be the best of the bad things
True
Cause that can all be fixed without tearing down the block
god I hope it’s not the engine
If anything, a new engine is about 2.5k
that actually isnt too bad
This unit is going for around 8-9k used
So not a bad price for a engine
Def cheaper than a reman engine for the RMK-800 I used to have
if its a common rotax a used one may be cheaper too
interesting interesting
Welp, I just found out why the blower I was working on was bogging past half throttle. The carb was on backwards so the engine couldn't run the diaphragm pump in the carb
And i though the carb was on right since it was like that when I got the damn thing
ah yes the joy of owning used gas stuff
30 min repair starts with 5 hours of undoing the previous owners work
Had to help my old man friend lift his harley he dropped it in his drive way hes 72 told him he is going to need a lighter bike
Not even mine, it belongs to a friend
I'm like the 3rd person who has worked on it
he went all boomer on you didnt hee
thats 2 too many
No kidding
I was wondering why the carb adjustment was facing the back of the fan housing
Average Australia Ute in Australia
Unlikely Facebook W
Sell it before it rusts and loses even more value.
Or maybe use it for parts.
Sell the rest for scrap.
i have that same bob ross bobble head on the dash of my volvo 

Naaa
All clean
Mazda Savanna RX-7 GT Limited
Production Years: 1986 – 1988
Engine: 13B 2-Rotar
Aspiration: Turbocharger
Power: 138 kw / 185 bhp @ 6500 rpm
Driven Wheels: RWD
Curb Weight: 1280 kg / 2822.3999 lbs
Nice cars
Sign up to the product newsletter to have your say with product development:
https://www.lonerider-motorcycle.com/pages/signup
Abonnez-vous à la chaîne youtube Lone Rider France: https://www.youtube.com/channel/UCABg1BBHTAqRrjnOzz64uLQ
So can preemptively answer your questions:
When can I buy it? The target is to ship end of 2022
How much...
Nah
Has anyone heard much about the Vauxhall Ampera/Chevrolet Volt? I’m looking at buying one and I’m wanting to know what people have heard about them?
(They’re the same car, I’m in the UK so the Vauxhall Ampera is more readily available)
Gotta love GM and their very inbred brands
Another Toyota model I’ve never heard of
THe issue with the cybertruck is that... if you crash it, you die.
That's what happens when you have a car that doesn't crumple
The issue with the cybertruck is that it even exists to begin with
And everyone else dies too
Battering ram
no
Cybertruck is an alright concept
But if you give it a car wash without pressing a button you can kill it completely so that makes up for it lmao
It's a inbred Pontiac Aztec
it's just a really poorly executed final product
Pontiac Aztec was just ugly
had it been styled better it would've been so ahead of its time
Still looks better than the cybertruck
bascally crossover SUVs before crossover suvs were a thing
I don't think so.
It really does. The cybertruck is the ugly one here
I also don’t think it looks that bad and kind of like it so what do I know
an opinion on the internet. Kinda scary isn’t it
Yeah, scary shit
I'm not saying the cybertruck is good, I just don't think it's worse than the Aztek
Tesla won't go bankrupt because of the cybertruck... guess what killed pontiac
Neither car is any good, though.
GM being GM is what killed pontiac.
That is true
They killed off the Firebird/Trans Am for the Aztek
then garbage after garbage made GM almost go under
GM is just a bunch of severely inbred brands now
not my problem
I'll keep buying either Japanese or German
Japanese because reliable
Same. Only GM shit I deal with is pre-2000
I deal with GM products from back when Pontiac still existed
ahhh
Mainly this
Got the parts I needed from upullit and also free keys
I do not own a Toyota nor an old car lol
Go steal a toyota with 'em 
holy shit a real aztake
Its a Mazda it would do that in the sahara desert
Lol
Luckily my rx7 isn't anywhere near that rusty 😬
And it's.... 20 years older lol
Oh wait nevermind
The chassis isn't rusty.... The coolant passages and o ring grooves are
The fuck were you running? Straight hose water?
My best guess is that's 20 years in a field with straight water
Needless to say, those housings are fucked
I daily drove it with coolant for a year and change, I was like "huh my coolant temps are high ill flush the radiator" and it flushed the coolant seals out
Oh yeah
It's getting a 4.3 V6 with a nitrous plate and a manual valve body 4l60 right now but I have a 13b I'm building to go back in it
oh damn!
And it's 12a so I can't find housings for cheap 😭
I love the 12a but I just can't afford it I'll have to go 13b
At least it's even GETTING a rotary put back in it
Eventually. I'm not doing anything to the car that can't be reversed.
You say that, then have to break out the cutoff wheels and sawzall
The V6 will keep the balance and let me keep building the chassis until I have my semi-pp 13b
Already have the mockup block in it, not happening lol
Good lol
That's the main reason I didn't go with the 350, it's a little longer so I'd have to modify the firewall
4.3 is 1 bore spacing shorter
The 4.3 is the S10 V6, right?
Yeah, I had a crate 99 S10 vortec engine sitting around
Except for long enough that it needed some work so it's at the machine shop getting a hone cam bearings and a few other things
I have a 304, it's in a jeep tho
AMC is kind of ford
i had a 302 when i had a bronco
AMC is parts from the Big 3 that they stopped using 5 years ago crammed into a AMC shape
350s are so much cooler though
Rip 😢
Idk man the AMC 304 is a sweet engine, I believe it's the only V8 the CJ series jeeps ever got
350s are cool and all, but I wanna keep a Ford powerplant in my Bronco II when I get around to dumping that 2.9 V6
Hence the 302
Here's a ford for ya
my 302 made a whopping 129 horsepower
This is a Bronco II we're talking about. The small guy
A 302/old 5.0 is a common swap for these trucks
5.0 is also a great platform they just snap in half at like 450 torque
You have to brace the block
Anything above that and I'm gonna have to start upgrading suspension components
If it's a crawler anyways the gearing will help with torque so you really don't need it
one of my friends has an international scout 800 with a 350 in it lol
Which I'll probably have to swap the transmission and transfer case
This is my daily
Ah
Yeah the 5.0 would be a great choice. You could probably salvage one out of a town car ECU and all and swap the cam with the mustang cam
I've got plans to eventually turn it into a crawler, but that'll be after I have my own place and more reliable truck
I plan on getting a wrecked '90s areonose F-150 from copart and robbing it for parts for the swap
Cool
There are a lot of people that do the 5.0 swap in the RX7 chassis but the company that used to make the kit for it doesn't make them anymore
Guy that lives up the road from me bought the last swap kit that they ever made
isnt the whole point of an rx7 the engine though
dont really see why you would want to swap it
The first generation chassis with the 12a barely made 100hp and no mechanic would touch them because they were the first major car in America with a rotary, so they got swapped a lot
It's less common now but a lot of them ended up with Datsun 4 cylinders and L block straight 6 and gm/ford small block v8s
gotcha
Big Holley highrise setup
It has a single carb and a turbo now, I'll see if I can find pics I saw him at a show recently.
unless you run it rich af at lower psi
This is his current setup
damn
Boost prepped carb and a boost referenced fuel pressure regulator
I think you can get special carbs for turbos
oh interesting
thats cool af
These are from right before I put a 12a in it. It ran like ass in this state because it had compression problems
This engine came from Mazdas race program with those filters on them and like 15 spares
So I kept running them lol
The seat make it look like shit ngl
When you get the 13b in it, I would run a Wix or K&N
When I first started working on this car for a friend of a friend before I owned it he got it from a Mazda dealership that raced it through Mazda, it came with three engines and a bunch of turbos and stacks of wheels and tires and spare shocks and suspension and all kinds of stuff but that guy went to prison and then the car disappeared and popped back up for sale later with nothing but a single engine and a few of the spare filters and stuff so I bought it cheap
I've already told him I'm not a fan lmao
Please buy him a new seat or sum cause that color is fucking awfull
Lol not my car not my problem
I bet everything else was sold off
Look like the typa seat you'd give to a baby to sit in or sum lol
Guy prob got a shitton of money out of it
It all was, I've seen bits and pieces in rotary groups. The worst part is most of it was scrapped. Like the 20+ old school custom panasports built for that car
I have 4 of the wheels left, 1 of the exhausts, the original transmission, and a few other parts left from the original race stuff
Yeah I was battling the town crackhead for it he wanted to make it a farm cruiser, glad I managed to grab it before he did
Hopefully it'll make it another 40 years, I'll electric swap it if I have to
I aint putting any EV componetry within a mile of my Bronco
I'll diesel swap it and use cooking oil to run it if I have to
I helped EV swap a little MG and they might not be the same experience but God damn are they fun
Just all the torque all the time
We set it up with a clutch and the factory transmission too so you can drive it manual if you want to or you can just leave it in 3rd and drive it like an electric
1980 - Aston Martin Bulldog
Engine: Twin Turbo V8
Power: 447.4 kw / 600.0 bhp @ 6200 rpm
Driven Wheels: Mid Engine / RWD
Weight: 1727 kg / 3807 lbs
0 – 60 mph: 5.1 seconds
@misty mantle @hexed kayak we took the jetskis to the lake today and the problem one wouldn't crank at all, the other one was fine. when we got home we opened up the trouble one and somehow the muffler/exhaust system was full of water again??? we then opened up the good jetski (that we used all day) and there was also water in that one's muffler but not as much? like wtf
i have no clue what is going on with these things
Who’s is that
Wish it was mine
I’m sure we all would 😭
If it's set up like a inboard/V-drive boat, the water going through the engine should exit through th exhaust
i belive they have heat exchangers because there's a coolant tank in them, the exhaust cooling is probably just straight up lake water but still idk why it's getting stuck in there
Has the problem unit been over heated at all?
Also, where does the exhaust come out in relation to the waterline?
Not that I know of
I'm pretty sure it comes out where the jet is, so below the waterline
That would probably explain the standing water in the exhaust
As for the engine being flooded again, does it seem like it's lost any coolant?
I'll have to go check but I don't think so
if you're talkin about the head gasket being blown i kinda doubt it the water being pumped out is either perfectly clear or kinda yellow ish (oil)
plus the coolant is bright pink lol
ah
Was the engine free?
not 100% sure i think it might be hydrolocked again
it just wouldn't turn over it'd try but wouldn't spin
and that's what happened before we found the water in everything
(the first time 😭 )
If it is hydrolocked again, something is fucky with the exhaust
yeahh that's for sure
Called a Durango a grand chareoke 😭
we’re going on a trip in our favourite 1.0!
What gen, the older you go the less itll be since old cars need maintenance and its easier to start with say, an NC miata, since its newer and wont need as much to keep it running in the longer run+ na prices are stupid and its affecting nb prices sometimes. Nc still has its value being newer and more tuning potential
Miata is always the answer.
But really. They are fine as a first car. Just a bit expensive to purchase at this point.
But maintaining should be fairly affordable.
Then there is no need to worry about it just yet
And license for a 'normal car'?
That sounds like Australia or something.
Ahh.
Fine. I'll do it myself.
I mean. That's Europe for you.
Well aware. As someone with a CE license.
Honestly. There's really no need to look at cars yet.
You're what? 14 years old?
So another two years until you're 18 and can get your license then.
No real need to sweat about it.
Hopefully the car market will have gone down by the time you are actually buying a car.
The issue we have right now is that value of older cars are through the roof, since people like to keep their older cars in favor of new fancy cars.
I've had my BMW E46 for over 8 years now.
Not really sure if I am going to replace it anytime soon.
Pretty much.
Would be nice with more power. But I'm not too picky.
170* hp is plenty.

I'm spoilt with the built quality.
One of the cars I've looked at to replace my 3 series is just a 1 series.
MAYBE a 4 Series Gran Coupe.
Sweden
USA doesn't get the 1 series. 
At least not the hatchback.
I care about the interior quality, I guess.
If I could, then I would love the 440i, 6 cylinder.
Or hell, even the 140i
But I understand how another person feels, and how they pick cars.
They have a bunch of cars, most of them older with a manual.
But all of them have short gearing.
Yeah
It's true.
But really. Lighter weight in general is where it's at.
Power makes you faster on the straights.
Less weight makes you faster everywhere.
Bmw is so atrociously awful with build quality and reliability
Bmw is the single worst luxury brand that's not land rover or Maserati
Tesla is probably worse.
Squeaky dashes and body gaps that belong under a birthing gown galore
Really the only build quality issues are the quality of the interior plastics they’re pretty well put together the interior just breaks after some time, that and the sticky E9X interior door handles
And then there’s the whole cupholders thing but I’m pretty sure someone at bmw said that was intentional to discourage having drinks in the car because it was a car meant to be driven or something like that
And they aren’t as bad with reliability as people say they are either imo, I see more BMW’s over 200k than any other car brand 🤷🏼♂️ with the exception of Volvo
Heavy and most old models having engines issues after 2 miles ?
Also pretty pricey + meh reputation of bmw drivers
I don't like German cars either
Yea I wasn't talking about interior their drive trains are dogshit and made of glass
Not in my experience with them 🤷🏼♂️
Btw Which E46 is it?
320i
Happy 20th K*lldozer anniversary!!! Unfortunately the FBI forgot to destroy this one piece of the bulldozer in their mission to keep people from idolizing it. We doubted its authenticity until we found these photos in the public records search, I guess they just forgot to pick it up… Absolutely wild. The finder will be kept anonymous. Part of it...
175426
@hexed kayak
Yeah. First year of the LCI.
I guess build year 2001, model year 2002?
🔥 🔥
Bought it like 9 years ago now.
€5,000 with 70,000 km's on it.
Closing in on 200,000 km now
Around 120000 miles, DAMN
One of the few reliable BMW’s lol
The rims on it are Style 304's from the X3 
Bought the rims cheap, for like €200. And then threw on some Pilot Sport 5 for another €500
Oh sick
And slightly lowered with the Bilstein/Eibach B12 kit.
take it from a toyota fanboy: the chevy volt had only one refresh, also chips not (even wires), in new cars post 2015 are probably good for about a decade: then dead https://youtu.be/_QCSNwBtoI0?t=90 . Buy a car on its second or third refresh
Do you ever wonder why some cars are reliable and some are not? Some cars are fun and some are not? Some cars have a lot of technology and some don't?
In this video we break down car manufacturer visions into 4 categories for you to know why things are the way they are with cars.
TCCN Automotive Inc.
Toyota and Lexus Specialist Repair
Visit ww...
Maserati Merak SS
Production Years: 1975 – 1983
Production: 1000
Engine: 90° V6
Price: $ 27,620
Power: 164.1 kw / 220 bhp @ 6500 rpm
0 – 60 mph: 9.1 seconds
Top Speed: ~244.57 kph / 152 mph
Shoutout harbor freight for the $90 30 inch roll cart
And it's fuckin purple :)
Fair enough
Depend on the models lol, older German car though, I feel like they are as reliable as a frog doing weather prediction
Personally I just want an old 205 gti for a car lol
Yep
Peugeot 205 GTI
Oh the rs model ?
I have a rare Renault. I have the laguna GT
That's a nice one, I just like Peugeot more for it's looks and design, also their history
Coupe version with the high tax and a 7 second 0-60
3.5 turbo
Chassis started life as a 2.0 diesel write off
Some of them have all wheel steering, Renault 4control
Ohh I like that one
Interestingly, it's on the same platform as the Nissan Qashqai
Why get a 205 gti when you can get a BX : )
my project in life is to turn a 205 gti into a rally car, thats why lol
it do look nice tho
its heavier than a 205 and bigger too
i like how compact a 205 is
you would be suprised BX's are pretty much the same weight
BX's are extremely flimsy cars
plastic bonnet and boot
Renault and Nissan are surprisingly similar. The Renault M9R engine is common in Nissans
The Citroen CX 25 GTI is a cool car, somewhat forgotten high tech car for it's time
wait holy shit youre actually right
another car to the list of dream garage then
it look really food ngl
i wish i could find a baghera tho
Hey look a prelude without pop ups but it's also a crz
In the service we call this a doorstrike
It's a matter of life and death so you just ram down the whole garage port?
ahhhh man i forget wheel pants. I miss them. In an era where everyone basically has wheel covers for aerodynamics anyway, we really should bring them back
itll break the truck cos ours are made of fibreglass
I don't know why but i like the vw polo pickups i see in south America
@misty mantle i think im getting fucking old
i used to be able to rip around in my ss ALL day.
i just went out for 4 hours and now my back hurts, im tired and im legit 4 pounds lighter from all the sweat
racecars and montreal roads 
tbf its also the first time ive driven it more than 15 mins this year
My goofy ah two cylinder making funny sounds
wtf is that
a rat in the form of a car
im not even trying to bully that car rn but i just got ptsd flash backs from driving my gfs fiat 500l
that was the only reliable chrysler ive ever seen and i was afraid to step on the gas cause its little weenie motor sounded like it was going to pop if you wanted to get to the speed limit anytime soon
@dusk ocean of all the things to see I didn't expect to see two, yes two in two days Eneos Grenadiers in my area
two days in a row, two different ones
if you don't know what that is i'm not surprised
installed remote start on my car
1988 Renault Mégane Concept
Type: Concept / Prototype Car
Released: 1988 Paris Motor Show
Engine: V6
Aspiration: Turbocharged
Power: 186.4 kw / 250 bhp
that thing looks sick
looks more like a 90s car than a 80s concept car.
The only info i could find was 3.0-litre turbocharged V6 engine developing 250 bhp
This results in a diagnostic nightmare in 10 years
Towed in because of a no start
Cranks when it gets there
Won't crank the next day
Good fuel pressure
but you see, it'll be a future owner's problem, not theirs
Well it's my problem when I have to fix it
I'm the one getting paid to repair it
And jeeps are usually fairly cheap to fix
Parts wise
No
Mopar refuses to use new technology
Not german anymore
Daimler didn't follow chrysler into fca/stellantis
I just use chrysler as a blanket term
Because fca stood for fiat-chrysler automobiles
They still use the 3.6 pentastar
In pretty much everything
i like fiat 500, they are cute car but god they are loud asf
i meant loud when youre inside one lol, outside its pretty silent but inside dear lord the engine feel like its about to blow everytime you accelerate
they look like they are fun to drive
I would still own one if i could 🙂
lol won’t be my problem in 10 years though 😂
YYYYYYOOOOOOOO
I think you may be the first person in here with a Hummer
W
inline 5 engine?
Yeah
W
TIL the H3 had an I5
I thought the smaller engines were a V6 and the larger 5.3 was the V8
Cool
My apologies still getting used to the info cause i just got it and was looking into H3's as well but my H2 is a 6.0 V8 the I-5's were only H3's
sorry for the mixup
This car belongs to a man who takes it up the ass
watch out or he will call his friend who post pictures of skeleton with fire on facebook
Only issue on this car is the clutch, I don’t trust it. It’s a little.. sus. But a new clutch ain’t too bad if you install it urself so if it goes, it goes
- alfa romeo. alfa romeo has their own lineup of cars with the twin air engine (two cyl turbo + fiat multi air tech)
Search alpha romeo twin air
It’s the same engine as the Fiat 500 twin air
More or less identical to the 500 twin air
It is?
Lol
Punto 5 door tho the alpha 3
I rate the twin air engine. No tax, no ULEZ and I get 57mpg mixed driving with mine
That’s imperial in America it would be 68mpg
Idk why we used imperial mpg it’s fuckin dumb 💀
Using Imperial is dumb anyway
Mito is one the same but shortened platform as the (Grande) Punto (Evo)
Actually, Opel Corsa D/E is also on the same platform as the Punto
And the Adam, which is a shortened Corsa E... Is the same as a MiTo 😛
best fuel ever https://youtu.be/w8r2xnITnqA
Support the channel by shopping through this link: https://amzn.to/3RIqU0u
Patreon: https://www.patreon.com/d4a
Become a member: https://www.youtube.com/channel/UCwosUnVH6AINmxtqkNJ3Fbg/join
Motivation: https://www.youtube.com/channel/UCt3YSIPcvJsYbwGCDLNiIKA
Sources:
https://www.transportenvironment.org/uploads/files/2017_09_Diesel_report_fina...
its funny looking back on stuff like this, wonder what it will be 10-20 years down the line
I still own a euro 5 turbo disel and a euro 5 turbo petrol. After euro 6, they got so shit lol so I am not gonna buy any newer than that.
Also got an electric which is the best in terms of these eco nuggets but I can’t afford 3 electric cars. Maybe in 10 or so years.
Had my car re-inspected today after I failed last month.
They just looked at the replaced shocks, and more or less just went "yupp. That's good"
we arent really meant to paint the parts we weld for a retest but usually gets covered in seam sealer and underseal anyway and they are fine with it
They make no money off the retest so incentivized to speed it along.
For me it was 250 SEK, and I was in/out in like 3 minutes.
If its within 10 working days here its a free retest otherwise its a full retest you will have to pay for
Ahh. Here you have a month to recheck whatever you failed on.
I pay £45 - £54 for MOT's, there is cheaper places but I like not getting messed about with
If we took one of our cars to kwikfit for an MOT we would get a bible as advisories
Prices here vary as well. Depending on time of month and everything.
There is some places here that offer "free" MOTs but ofcourse they are just looking for things to fix and charge you loads for.
Last week of the months are usually higher. Since people are lazy, and always do the inspections last second.
Now that's a proper scam.
Because here it gets reported to the government.
At least here it does.
Its not a scam but it is heh
The dates are pretty messed up here because of cobid the government moved peoples test dates like 6 months so twice as much ended up needing done at once.
Some kids commented on my car today. So that happened.
"You think it's lowered?"
I didn't really hear much else of their conversation.
i went out in my cobalt yesterday and the reactions were weird
im used to getting a couple people a day interested in it when im driving but yesterday you would think i was driving a limited production run lambo with all the attention i was getting
i hate getting attention. cops usually arent far away when you get it
My car isn't very attention-grabbing. It's just a reasonably looking E46.
Lowered maybe an inch.
tbf my car is bright purple
I drive slightly distinct cars, I never really get any police attention. passing them going the other direction at 90 in a 60, not bothered.
Some cars I drive you get people laughing at you
I once had a flashy merc cut me off then at the next set of lights he laughed at my car.
i passed a cop at 170kph in a 100 in my volvo and the fucker didnt even react. i was doing 125kph in my cobalt ss and a cop blinked his light bar at me
lol
nothing beats the sound of this car man, I originally bought it 50% considering flipping it after getting it sorted, but now that it's sorted I don't think I can part with it 😅
I need to get a gopro though so I can actually do a POV drive with it where I push it properly at a track day. It doesn't even reach peak power in this clip (mainly because I don't want it to break traction while I'm holding my phone in one hand lol)
you should sell it and buy something that isnt a timebomb for your wallet
I had to scroll up too far to see something french, y'all are slacking
I have money set aside in-case anything goes wrong with it
including money to buy an entire new engine if it comes to it
I'm currently $20,000 below budget on this car
keep it up, no slacking
if your ready for it then keep it
but there is nothing more expensive than a sorted bmw suddenly becoming not that
This is my 7th BMW
not new to owning them
I wouldn't keep buying them if money was the concern haha
you know what you should do if you have the space
I have a Tesla as my daily, this is just a weekend toy
whats that
buy a couple big heavy duty shelves and then 1 or 2 wrecked v10 cars and just build an invetory of parts for yours car so no matter how rare the parts get your always good
I've thought about it tbh
If any other really cheap M5s/M6s pop up I'm probably just going to buy them so I have extra parts
because this M6 is in wildly good condition all things considered
especially for the price I paid
dont let it sit and rot though. actually break it apart and store everything
i still dont know how to feel about the back of these cars
The front bumper needs work but I already have a quote for that and I'm getting it fully restored
I personally like them, I think these cars have overall fairly "sleeper" understated, but still aggressive styling
sounds so good
It really does
lemme grab a pciture of my F10
Tasteful exhaust + NA V10 can't be beat
i never thought it looked bad but since getting a p2 volvo ive started to think it looks like a melted S60
I love F10s
The E63's most attractive angle is from the side imo
it has proper "don't race me" lines LMAO
yeah the little whoopty curve near the back
+hoovie had/has one
This vs the Gallardo?
I'd probably take the Gallardo for its handling and styling
...But not by much
I know of someone that had one of these, they deliberately hydrolocked as if it had been driven through water for insurance after it got rodknock.
yeah
And also the Gallardo is more expensive and doesn't sound as good
i want to defile a gallardo with an iron block truck motor
two track machines
one of my headlights has a broken seal but
I thought about it a bit more. I've been saving for a Gallardo for a while and I was just like "why would I want that, the M6 has more top end, sounds better, is easier to maintain"
they are tempting
for sure
Everyone knows you dont buy a E60 M5, you get a 530D and stick M badges on.
Murcielago was the poster car for me as a kid
LMAO
🤑
cheeky remap to go along with it
It's wild how many people don't know about the V10 M5/M6
When I take the M6 to meets I get so many confused reactions
too scared of the V10
"what BMW is that???"
"They made a V10????"
"Is that the S65 V8?"
every time its driven i hope the clutch doesnt explode
it's a car you need to buy with money in reserves incase stuff goes wrong
Can always just commit insurance fraud
yea
I bought my M6 for $9,000
WHAT
I have $20,000 set aside for repairs rn
yeah
- Clean Title
- new engine 10,000km ago
- No major damage
- No major claims
- 100% west coast car
- ENTIRELY RUST FREE (I have pictures of the undercarriage if you want to see them 👀)
- Came with a $3,000 eisenmann exhaust
- Passed a full mechanical inspection with the only bad point being the air filters
There's one of these near my house for $2,500 currently
I've been thinking of buying it
Old high spec 7 series used to be like a grand here, I always thought of buying one to see how long I could keep it going on a shoestring budget.
Sadly insurance wanted like £5k/y at the time.
These guys are so cute btw
early 2000s porsches are underappreciated for being "ugly"
but like
happy bug car
I just don't agree
I don't think they're ugly LOL
then again I like the E63 M6's styling a lot so
take my opinion with a grain of salt
little guy...
sorry i just still think its hilarious you saw my reel this morning LMAO
I'm really happy with how it's been performing. I was worried people would think I was trying to flex or something
the entire video is just meant to be engagement bait
so I can make more content dunking on haters
GOOD choice
£9k car : |
cantankerous nugget
Its a little special
Saab B204 swapped in making over 300hp in a Lada its a proper deathtrap.
i dont see too much of your content but once in a while i see you cover a species or whatever
Yeah most of my shorts are educational stuff intended for newer people in the fandom
I've been trying to make more "entertaining" stuff recently though
e.g. I made a short with one of LMG's "old" RED Cameras of me recording fursuiters
i didnt know you had worked for LMG
thats neat
yeah I was one of the writers
back in 2021
I realized they still had the RED cameras because of one of Gerald Undone's videos
so I messaged one of the guys and then bought the RED Weapon they used in the "watercooling my camera" series
I'm currently re-rigging it atm actually, I have a picture hold on
what do the fans cool?
The entire camera
Sensor, onboard computers, PMS
neat
These cameras use A LOT of power
99Wh battery
can you hotswap
for context, my A7S III could be powered for 9 hours off of them
I can with an extension plate but I don't need to shoot that long
if I'm doing livestreams I can just power the batteries via USB-C
yeahyeah
they support two-way 65W PD
which is just barely enough
the camera draws like 62W peak lol
which is a ridiculously high amount of power
yeah for a camera
anyway back on topic to the car thing
this is the current project that has my attention
going to etch and paint this frame for it since the current one is shot
how many projects do you have?
Framed vehicles suck :^)
I love this car
£5k car, im always amazed how much unibody cars can be rusted and still be structurally sound. wont take much welding.
very false
That one look nice too
frame when not cracking into two pieces
like every pickup after 10 years here triangles itself
you can take a 1950s truck and instead of modernizing it you buy a 00s cown vic pull the body off and then dropp the truck cab and bed on it
do body swaps with unibody cars too
The Dakota, a 325xi wagon, a VW Vanagon, a 300ZX SMZ, a 944 turbo S and a showroom stock 300zx race car
takes more than 8 bolts to swap a body with a unibody
git gud at weldening, I wouldnt do such a thing yet as insurance is aids.
thats what i do as a job
sad for you
Alot of my friends used to be welders but quit as its a quick path to death
you wear all the ventilation equipment but at the end of the day still end up with 100 tonnes of grinder dust up your nose
thats why im being a cheap mf. so i can rake in the loot and quit before im too far gone
its going well 
Made the mistake of thinking id get away with welding zinc a few times then ending up with the super flu
im not 30 yet and ive got more than my grandparents retired with at 70
ive welded zinc many times and not gotten sick
well they got to enjoy stuff costing £2 heh
tf did you do
inside a car
yeah but ive had a few decent strokes of luck
got a job in the acrtic that gave me enough for a downpayment on a house in undr 2 years and then in 5 years that house more than doubled in value and i sold it
seems like luck is the only way to make it these days 
Friend was a coded welded for submarines and nuclear stuff, we often joke about that when he does welding for cars as a hobby.
"put that on a welding facebook page and say it was done by a coded welder"
your friend must be rich 
they will pay 450$/hr+ for welding on submarines here
doesent work anymore just fucks about with old cars and raffles them
sounds like the pay over there is similar lol
wasnt that great, does suprisingly well raffling shit old cars though
How much daylight should I be able to see through my throttle body
Coz I see maybe a mm on the both top and bottom
hope its not another crossover eclipse
ev lancer looks like 🤮
im amazed at how Mitsubishi is still a thing here in NA
because poor people would rather buy one as the cheapest new car over learning an ounce about good used cars
Even tho Mirage isn't even the cheapest car somehow in spite of being BY FAR the worst 
(in US at least)
NGL it hadn't occured to me that they still were. I thought they went away.. but it was just the Evo that went away.
They closed tons of dealerships. But that next gen Evo pic is fake
I looked them up and realized that yeah, I see brand new Outlanders out and about, must me the only thing they're selling in any volume anymore
xD
annnd my point exactly
oh how they have fallen
i expected it.
mitsubishi was never a true car company
just a company that made cars
cars are one of their smallest buisness ventures
1987 Lamborghini Portofino Concept
Engine: V8
Displacement: 3485 cc
Compression: 9.2:1
Power: 225 bhp @ 7000 rpm
Driven Wheels: Mid Engine / RWD
Transmission: 5-Speed Manual
Is the idler pulley easy to replace on a audi a4 8ed?
This video literally looks like it hasn't finished rendering at times
it's WEIRD
hey yall, I watched Linus hot takes video and got a couple questions, some rando on twitter made a good point and I was like why didnt i think of that...
well he said get an ipad for your car since the infotainment system,
How easy would this be to set up to existing speakers in an older Porsche? I don't want to pay the Porsche tax for the "classic radio" apple car play setup that Porsche offers. And these crap cheap options aren't appealing.
I would love to get an iPad and just use it as my naviation + youtube music.
THANK YOU if you have any ideas or thoughts where to start.
Over the last 75,000 km's or so, I have used around $11,000 worth of fuel. 🙃
I think these two?
Can't find the charging points, tho.
There's a high and low pressure side. Look for two caps, usually different sizes to them.
The black ribbon cap @violet meteor
jusdt google ipad dash install. like 1000 people have done it before
stimming in traffic goes crazy
Thats a funny looking radiator
Jank oe intercooler is jank
Doing some tree work with a Hyundai excavator until it caught on fire.
Don't buy Hyundai, kids
All excavators are more or less the same these days.
I wonder what actually set it on fire.
He thinks it was either oily leaves or shit thrown into the area that the boom mounts to by his muchler since he had ran it the day before
Sounds plausible.
He didn't have a extinguisher on it, and the one he ran and grabbed of one of his other excavators lost it's charge from just sitting
Yeah. Some places require you to check up on them, or replace them every so often.
It's like $40 for an insurance.
A normal 6 kg ABC extinguisher is about that price.
They're supposed to be inspected by the fire department I think every 6 months or yearly
Depends.
I've got several decade old extinguishers that are still charged, I def haven't discharged some of them for fun
I try to keep some of them around when I'm working on stuff
A good habit to have is also to turn around/shake a normal powder extinguisher
At least once a year.
I have three extinguishers in the truck.
We have 1 in the basket on my dads quad when we're out cutting or splitting wood, I should probably get one for my bronco
I have two 6 kg extinguishers, and one 2 kg.
Should think about getting one for my car.
Powder is crap.
Foam is much better
I still need to buy one for in my car. It isn’t required
Depends on the situation.
In my position, then I can't really use foam.
If I remember right, then foam are used for class A and B fires. I require ABC.
Just watched that lol
very unfortunate
I’ve had a fire extinguisher in my pantry for at least 10 years and the dial still reads green 🤷♂️
idk how they work exactly
Pull pin.
Aim towards the base of fire.
Squeeze handle.
yall ain't seein' me no more 💀
my dad is gonna make me try a 911 on the nuburgring on his racing sim, how cooked am i ?


