#public-chat
1 messages · Page 1625 of 1
what infill pattern at what percent creates the stiffest prints?
i need my part to not bend
looking online says concentric at 100%
but idk
Bro gnu shred taking so long on entire /dev/nvme0n1
I wanna rma this dumb drive already 😠
And especially command gonna fail on first io error
Luckily its ssd so in theory... if i run in while true loop, it will corrupt different blocks due to wear levelling?
@vapid smelt ?
500MiB / 2TB
🔫
Is there a chance that 'twas I who fried it because i didnt properly secure thermals pad n sht when first installing it into notebook? Cause im seeing a pattern that might indicate thermal throttle
It only errors out after intensive use
What
Should i shred that teamgroup ssd before rma?
I mean i already barely wiped partition table and made a giant xfs over it
And let it do at least 1 pass of 'discarding block XXXX'
...whatever that was
I don't think they will take a shredded ssd for a rma
I mean gnu shred command :kekw:
Ah
It basically writes /dev/random into file, partition or disk
Why not
Its slow as bollochs
Just finished 1GiB
In theory 2GiB and 1/1000th of data approx corrupted idk
Ill just leave it alone for now (or until first io error)
LTT should be changed to LPT = Linus Pool Tips
And a spin off channel LDT = Linus Dad Tips
LHT = Linus House Tips
LCT = Linus Cooking Tips
LBT = Linus Badminton Tips
Or Linus how to use pool as cpu cooler Tips
Hey guys, how good is the Thermalright Frozen Infinity 360 all-in-one… wanna see is it is worth it… don’t wanna get in too deep into water cooling
It cools
how can you be so sure
Also, is it hard to use them and do you need to provide maintenance to them?
no
Technically they evaporate coolant over time so every 5 or 7+ years you could top them off
But not a real issue
Since they will die by then
Serious??? Should I go with an all-in-one or Air Cooling???
Getting a Ryzen 7 9800X3D
Metal tower coolers will last a lifetime only the easy to replace fans will die
https://pcpartpicker.com/product/CwGhP6/thermalright-phantom-spirit-120-se-6617-cfm-cpu-cooler-ps120se-black the perfect pairing
Most aio have a 3-7 year warranty and if the pump fails outside of that your shit out of luck
based
Mitsubishi is goated at rockets
This oughta be a fun project 
Why not cut the old case for a diy test bench?
?
angle grinder
Hack up the dell precision into a open test bench you paid $28 for
No that is a btx case I’m putting in a atx mobo in it I’m using the test bench to essentially adapt it. I’m just gonna have to do a lot of modifications in welding class.
Could've you just weld the mobo stand offs into a atx pattern?
Not it has a lip and it’s a non-standard power supply
And it’s btx
So pci and mobo is mirrored of ATX
Are you doing the spider man PC?
YES
Ok my 2 braincells were wondering why do all this work but then remember you talking about that case the other day
Yeah, I want the PC from in the game. Be able to run the game 
Wouldn't it be easier to JB weld the front panel onto a standard atx case?
Probably but I want it done as well as possible
thats a good deal
do people really pay this much for vodka
this gets a bit of a pass because its made from crops grown in the Chernobyl exclusion zone lol
Chernobyl vodka,let's get crazy
fun
Watch LIVE as Mitsubishi Heavy Industries launches HTV-X 1 to a Low Earth Orbit from LA-Y2, Tanegashima Space Centre in Japan. HTV-X 1 is designed to be more...
“why does it glow”
also you can just say potatoes instead of generic “crops”
distilling happens to be extremely good at removing heavy contaminates from liquid
one of the best methods
one of the highest thrust tio weight ratios ive ever seen lol
SHOOTS off the pad
we cant do any launches with clouds like that
nasa is boring
hi
Nice
No one cares but if I get fallout 4 and 76 I’ll own fo1 and fo2 on epic games fo3 and fonv on gog which I all got for free so I only need fo4 and fo76 on steam and ill have all the infinity stones
i literally just increased my gpu benchmark score by 50% by resetting my graphics settings
god knows what i did to those settings bruh
It was very much a joke, even if there was a high level of radiatioactive isotope contamination it wouldn't glow under normal light
LLT = Linus Laser Tips
LMT = Linus Musical Tips
LPT = Linus Paintball Tips
LST = Linus Skydiving Tips
LKT = Linus Karaoke Tips
LFFT = Linus Fast Food TIps
samsung weather says that lowest temps today will be 15 and highest will be 26
cool
Guys who’s excited for the White House ballroom
Use windows server
Exactly my thoughts about Windows and iOS
Ios is prob Unix based
Don't really matter though.
Hi
ios is too hard?
wdym ios is too hard?
Even Linus has shown how difficult it is to do things on iOS at times.
its not comparable to linux though
To you maybe
Android is built on the linux kernel
if anything is too hard I think its samsungs
then again last ios version I used daily was 13.3
Ballin
Im excited about gta6
I know that
at least iphone os i remember using one of geohotz's toys (yell0wp1ss or something) to jailbreak it on iphone 3g
lo and behold i finally got shell on my own device (wow!)
It was unixlike
Tbh i think it was deriv of some BSD just like macosea
So while not exactly gnu/linux its close enough
Weirdly they are extremely power user friendly
oh yeah I used checkra1n. before that I was using u0 whatever that one was called again back on ios 10. That was peak iOS to me
Not sure about modern ios tho
Yeah but then they hide settings for whatever reason and change the app drawer on you
Doesnt use ELF loader but prolly whatever tf macos does with its binaries. dylib n sht
They frustrate me compared to using pixels/grapheneos
literally .debs too.
Haven't had that issue. And for settings, the search functionality works good enough. I've stopped trying to manually navigate the settings on modern phones and custom Roms
I refuse to acknowledge GrapheneOS sorry
Ok? lmao
Well no .deb is packaging. But all linux even mutants like debian and ubuntu use elf header
The devs are jackasses and they are hypocrites.
And android tho it misuses a reserved byte to identify version
Youre really best off lookin at .so which are inside .deb file
Talk big about privacy and security, but then go on promoting the use of Google services. Yeah okay... You're really concerned about user privacy.
.deb is just like an installer package
Well yea Im saying I literally used a .deb to install a tweak iirc.
Ah ok gotcha
It was in high school so I have no clue why or what I was installing lol. I was new to jailbreaking at the time
Did you ever install hybrid builds on Blackberries?
I never had one
Yeah I got started quite a bit late
Being a child and all I didnt have much access to new technology of the time lmao
I feel sorry for anyone that didn't get to experience Android in the eclair through lollipop days
Kitkat and marshmallow are my favorite versions.. I think Kitkat moreso
Jellybean was a huge leap!
Taking my Nexus 4 from Ice Cream Sandwich, to an unreleased early build of Jellybean was night and day. I compare that to jumping from a HDD to an SSD. Even showing my workmates they were in awe!
Everything was jittery and choppy animation and scrolling wise before project Jelly
Ive had a couple phones older than that that I rooted with chinese spyware
You should get the idea if you've used one from before Jellybean.
Jellybean was a massive leap unlike most since
There have been some enhancements performance wise, but that one stands out in my mind as the most substantial.
I just thought the UI design was pretty peak back then
Was definitely power user oriented
Picked up one of my old phones and yeah android was a lot clunkier before then
flashback to me hitting OK on every SSL cert popup, all 20 of them per link
Yeah using one from that age now is not enjoyable cert wise. I still have a Galaxy S1. Full of that
hate material 3 though like
why are the icons double width now, this is stupid, not functional
I agree. A16 is so childish looking
If nothing else theres at least the desktop mode to look forward to. If Graphene does even get that, AOSP builds arent being released like Google said they would be it seems surprise surprise
Yep. I'm almost at the point I'd saying screw Android. I'll carry a GPD Micro or similar if it has a Sim card slot.
Or I'll hope for a competitor
Just no alternatives rn.
Yeah not a fan whatsoever of the current ecosystem
For those that reguarly use TierMaker (Or used to) is there a way to increase the width of the tier names? Incase they're super long for whatever reason
really good game for 50 cents
sure
I usually do gyroid, I don't know why
@chrome yew Whenever ur available dms pls. Seems like whoever accused me just dipped without sending any proof so... yeah
Apparently i have 12,186 years latency
oh great
playing with a player from another galaxy
Help. I can't update Enhancer For YouTube. I dunno how to accept its new permissions
Um..
Try your browsers extensions menu
Guys I currently have a gtx 1660ti a 3600 i have 150€ to upgrade something what should I get
breathe manually
fuq u bro
Shit.
Jamaica going to take a direct landfall from a category 5 hurricane
40 inches of rain, 160 mph winds.
hru doing?
Blink manually
doesnt work
hi guys
It's kinda funny but persona made me reflect on what I do in my free time
After school I always improve social links or study to improve my stats
But I don't do that as nearly as much I should IRL
Uuuuuuuuuuuuugh
Welp, guess I gotta find an alternative to Enhancer For YouTube cuz the YouTube UI updated, broke the entire extension, & now he's only supporting it on the literal 2 worst browsers (Chrome & Edge)
What about degoogled chromium
I don't like using that. Yes, I know thats odd for me to say since I use Opera GX. Bite me
Idk tbh but I don't get the appeal of it
I use safari on my phone, and on my pc Firefox and Chrome for when I want to use cashback or watch yt
I use next dns so the ublock fiasco didn't really affect me
I’ve never actually used chrome
Was wary of it from the out
Have used exploder lots in the xp days, but my default is DuckDuckGo & safari
What is this extension even for?
Chrome and chrome but Microsoft flavor
I need a better mouse tbh, the one I have is falling apart
Am i allowed to pay ppl if they fix my issue on here or?
macbook
Entirely unnecessary
I just want a reward bc its a very niche hard problem xdd
WHY is this dog water rogers ignite hub still 5g antenna on with hidden SSID despite being pit in bridge mode
Bridge mode is a fkn unicorn
Cause it's a myth
Maybe gotta look for a dumb modem that might work. This is the real canadian grind.
I put up a bounty for my issue any steam game your choice if ur a god technitian have a crack ❤️
Meh I'm personally too unorganized and scatterbrain to tech support over chat :/
idm calling
Revive LCT (Linus Cat Tips
anyone love cat videos
???
https://youtu.be/4PTXSKdr40k?si=fRAfoPfJkJSTE96I found this cool video
What issue are you even having???
It cant be that weird
i got the 2 light towers for free from my work but it doesnt come with a cable to connect the 2 towers. are you able to find a replacement i cant seem to find one other than the universal connectors that dont work with this type of product
also ik corsair is terrible but it was going to the metal recycling or i could take it so i took it to see if i can make it work
i got one working but corsair is annoying and made a proprietary cable to connect the 2 together
(ping me)
everyone needs döner
Alright so apparently the iPhone 17 pro max is rated to 6 meters of water upto 30 minutes
That’s really good
I want this hat
The “waterproof” swimming earbuds that shoks sells is rated for less than 3 meters
😐
water
swimming
not diving
Guys wtf don't do the nonse I was doing yesterday shredding ssd as block device
Turns out ssd have inbuilt format/sanitize functions
You can initiate w nvme-cli commands
The more you know 💡
Oh chatgpt posting is back
hm?
Oh yeah, never do that. It wears out an SSD far more quickly than using built in SECURE ERASE commands.
overclock cat toys
water cooled Cat Water Fountain
cat toy wars
Oh yeah im sure, but thing is I believe it's already toasted and due for RMA :p
So no harm no foul
Oh you meant the yesterday method is worse
Makes sense
Judging by crawling speeds and pure random bytes written
marine products specifically are like that. Usually 2-10x the price of a non-marine version.
basically all laminating epoxies are marine
surely not
Because skeet sits here almost daily essentially schizoposting his way through tech
and it literally reads like ai
643
shitpost number idk
ill be back in another 8 months
set timer for 8 months
ill probably dismiss it let's be real
good
Yo!
yo
Making diy body armor?
Fiberglass
So I've heard
My original hope was for this plate to be able to stop the 9mm hand guns, I would've been happy if it succeeded in just that. But I was blown the heck away at the armor's ability to not get blown the heck away. by any of my shotgun rounds. Next step, 5.56 resistant plates maybe?
Music:
Intro song is "Angel Whisperer" by Rameses B, building musi...
are those good i was thinking about buying one
making a real bullet proof telsa
Good so far
Ayn Thor
That is cool
BOAT
that is the reason
all epoxy is expensive
thanks for the name, gonna go snag one of those.
do you need 200 gallons?
epoxy? like little less than water
explicitly THAT epoxy
find their sheet of specs
yeah
looks yummy
on alibaba they use KG and liters the same 1 liter= 1 kg
Sure, but the one you showed is around 2.5x the typical price of non-marine clear laminating epoxy resin. Because marine shit be like that
density is 0.9 kg per liter as ibc are 1000l
1.23g/ml
why do they say ibc contains 900kg when it could carry 1200kg
because thats how much they put inside?
like what lmao
they literally tell you the density we dont need to make a guess
no
im making nosecones
that epoxy aint even sold in america
im just wasitng my time looking at the mechanical properties lol
nope,
ok
appel
35 lbf on this pla hook I designed, do I just thicken that part?
significantly bent at 40, fractured like this at 55
Thank I might have been duped
more fillets less sharp angles ig
Yeah yeah
Guys wtf i finally gave up shredding (too many io errors, statting nvme logs showed no change to Sanitize PROG bytes)
...but i didnt remove heat spreader sticker so it had no contact w lappy thermal pad entire time
you're not supposed to remove the thermal sticker
Perhaps I was both the fryee and also the friar of the ssd
Unless you have third party cooler solution
you're.. still not supposed to
also why are you trying to sanitize your drives, just run a 5-pass random and call it good
Too slow and molti io errori
Thats what id been doing past two days
drill bit time
then i think the data's already corrupt and unreadable, them trying to get it to work would probably show no readable information
one way to confirm that’s the case, drill through the platters
drive inop, just get a new one and snap that one in half
drilling is easier and less messy than snapping in half
Its still warranty'd tho
then warranty it and let the manu destroy it
RMA not bad way to save 150cad+ on 2tb nvme :/
your information isn’t that interesting anyways
deadass
no one cares about individual consumer information
anything worth destroying shouldn’t be saved to your drive anyways, Ie passwords and the like
Yeah besides id changed passwords on crucial services many times since last using lappy
Should be fime, you guys are right
what is the new password?
ThisTimeImSecure123
hunter2 as usual, but of course, you just see a bunch of ******* characters. 
if that doesnt work Hunter2!should work
Hunter???


guys i bought a cat 8 ethernet cable and my plan is 300MB from ISP, good or nah?
CAT8.1/CAT8.2 are more than enough for 2400mbps. https://en.wikipedia.org/wiki/Twisted_pair#Building_infrastructure
Twisted pair cabling is a type of communications cable in which two conductors of a single circuit are twisted together for the purposes of improving electromagnetic compatibility. Compared to a single conductor or an untwisted balanced pair, a twisted pair reduces electromagnetic radiation from the pair and crosstalk between neighboring pairs a...
How can i turn off hyper v if it doesnt show up on programs but states its on
is it on here
because hyperv is also an instruction set that can be turned on/off by the bios
while there also being a software called hyperv
Just be wary of counterfeit cat8. 40GbE on RJ45 (the thing cat8 allows for over cat6a/cat6) doesn't really exist, so cat8 cable are frequently fake because there's no way for consumers to test it. You're much better off with cat6 or cat6a for 300MB internet or cat5e if you actually meant 300Mb.
where squidward
@merry shale bro
dude has never said a thing in this server
https://retrohandhelds.gg/retroid-pocket-6-and-pocket-g2-officially-unveiled/
Can someone help me understand?? This company launched 2 basically visually identical products at almost the exact same price?
you give company a little more money for a little more cheap storage and ram
like paying more for a medium coke over a small coke
from rainbow six siege??
no the OS dude
kali linux
lol i dont play much games other than nfs rivals and minecraft
Hey
Hey coochie eaters
<@&750150305383186585>
You use it? Whats your favorite tool
Why are all the LTX Expo videos locked in floatplane?
Because Ltx is a paid expo
Oh, so can people who went to LTX access them?
If they went to ltx why would they need to, they were at the expo
Well then how do you get access those videos?
Oh I think I misunderstood the question. I believe the ltx videos were ticketed the same as the expo itself
Ah I see, thanks!
However I am curious, looking at screenshots from reddit it looks like the plus plan used to include LTX digital pass. (I have the regular plan) But was that discontinued? Is there no way to access those anymore? https://www.reddit.com/r/LinusTechTips/comments/1iiey8j/why_does_this_page_in_the_floatplane_app_still/
Because when I subscribed LTX pass was not listed.
No eye deer, probably a better question for the floatplane chats since I’m a poor
Tbh, I can't figure out how to access the floatplane chats. I have the roll, but I don't have access to any exclusive channels.
Ah I figured it out
Why Kali exactly?
hi
kinda like wire shark, havent used it much tho
wbu
its very easy compared to windows
Fooor cybersecurity purposes?
yea its pretty good too compared to all OS
Have you seen parrot?
Kali is just Arch Debian with a bunch of preinstalled tools. So is parrot but at least there's HackTheBox on that end
So you can like.. Actually learn how to use them
hi
It's Ubuntu, with some extensions and loads of utilities you don't need. Install Linux mint. Much more light weight, also based on Ubuntu, less clutter that you don't need
Linux Mint Debian Edition is Debian as well
And Ubuntu is just built on Debian.. Which Linux mint also builds on
kali is garbage for daily use
i would use something like https://cachyos.org/ instead
THATS arch.
Sorry yeah, I thought the switch to Ubuntu was made. Still, Ubuntu is based on Debian, so anything you know from Kali is usable in any Debian based distro.
yep
is kali linus a distro of Linus Sebastian?
Wouldn’t that just make it one of his kids?
so would Linus Sebastian be the Linus kernel, with his kids being different distros?
Possibly
Why are the skids popping up lately
Thats the third person Ive seen that said they "use kali" this month and I havent seen it in years
people that use weird distros of linux have to let everyone know that they use it
I get wanting to use a cool distro I guess but if you dont know what 90% of the tools even are it makes no sense to use
Like "its the hacker OS" without knowing why or whats actually different other than cool dragon logo
or why your networking is fucked
Connected to the internet just fine when I last tried it.. 7 years ago
644
I'm guessing a YouTuber mentioned it at some point recently
kali is just... Debian? what are we doing here chat
I forgor, shh
I use arch because it's convenient
I haven't thought about that OS in years
oi 2 kali linus in one day
It very much depends on the game
20 series has the benefit of DLSS support which will be very helpful as the cards age
It’s plenty for hades 2 which is all you need :)
Amazon such a scam... Ordered a MV6 Shure Mic, same day delivery. ordered it at 2am in the morning. said to arrive between 6 and 10 pm. Nope. just got the email that there are problems with shipping. its now 9pm... lets see if its still coming today, cuz its so dammn close to being on delivery status
I hear fiberglass is a bitch to work with
Nose cones aren’t that bad
The plan is to make the like positive of the empty space of the nose cone
Print it, then use fiberglass sleeve to wrap around the mandrel
Fiberglass sleeve gets narrower as you stretch it so it’s perfect for making tapers like that
Then an aluminum tip
Thanks to @PCBWay for sponsoring this video! Use Coupon code: PCBWay-BPS.space for $10 off any order over $30 https://www.pcbway.com/?from=BPS.space Code is valid for 6 months and expires 3 months after redemption.
Help support BPS.space: https://www.patreon.com/bps_space
Second channel, mostly for KSP: https://www.youtube.com/user/musicmakr
...
Fantastic video
I’d be doing basically the exact same thing except my rocket diameter is 3”
Except I won’t fail the first time because I’m built different
Idk how much epoxy to buy
I assume 1/2gal would be more than enough
1/2 gal epoxy and an additional 1/3rd worth of hardener
Rest of my rocket is fiberglass, time to upgrade the nose cone so literally everything in the rocket is fiberglsss or Kevlar
(The hardware is metal)
Fiber glass is thirsty for epoxy
Title: "https://youtu.be/jRbXzujI6ho?si=967Mye_qh4gc_fJY" (shut up Warship)
Intro: "Using Rocket Nosecone to cook meat"
Me when I hit the blunt at a fancy restaurant
He sent the beef to like 40km or something
Idk Amazon is batting like 9/10 with me, every now and then they screw me but it’s definitely not the norm
Yeah. Usually they are kinda good. Well not the drivers. They suck ass here in Germany, but the company itself? Yeah it’s fine
seeing him tip over the infill.. oooof lmao
I don’t think Amazon is known for hiring people with a good work ethic anywhere in the world
Amazon employees not having good work ethic is definitely the employees faults
I'll be posting in the build-a-pc section shortly and I was wondering if it is ok to share a link in the post? The link will be to an Amazon listing of a recommended mini PC.
Guys guys, just took apart my laptop, wanna know how the hinges were fixed to the frame?
It's an HP laptop btw
They were likely screwed into metal nut inserts melted into the plastic chassis. (Unless it's a business grade laptop from very specific model series, this is usually how most manufacturers do it because you get what you pay for.)
Exactly
Lots of broken plastic inside the laptop, now it's held on by ca glue
@alpine gale More expensive computers almost always get better things than this?
No, not "almost always", but in order to have better manufacturing, you usually need to pay for it. Cost aside, one should always do their research prior to spending money. Spending $6000 does not guarantee you'll get a properly designed well-built product, but it is more common when you go up in price.
I see
Because right now I am not sure if I want to buy another hp in the future, but if I know that spending more on a higher end lineup and get more durability, I'll take that for sure in the future
Before purchase, check the Service Manual for the model of laptop you plan to buy. The Service Manual will usually provide signs / clues about how the device was assembled, which will help you make an informed decision.
Too bad I didn't think about that when I bought this computer. I guess also teardown of the model on youtube, right?
Teardowns on YouTube or iFixit are also good, yes.
Also, do you know personally of any brands that you had better or worse luck in durabily of laptops?
Don't buy based on brand. Buy based on model / series. For example, Lenovo's Thinkpad T series are built like tanks, but Lenovo also makes cheap garbage, just like everyone else.
I see
That said, I tend to stick to Dell, Lenovo, and HP's business laptops these days because they're built well enough for their price, and those manufacturers are the only 3 who almost always publish the Service Manuals for their laptops. (Though ASUS has been getting better lately - I see they publish lots of Service Manuals now.) But again, even Dell, Lenovo, and HP make poorly designed business grade laptop models too. Nobody's perfect.
What about business vs consumer lineup?
No idea. I don't purchase Consumer laptops anymore, I don't recommend them to friends / family / IT clients, and I most definitely don't repair them anymore. The headaches they cause are almost never worth my time.
As a future laptop of mine I was eyeing either a framework or an asus laptop, flow x13 or g14
You never need a laptop when you are on the go?
That's... the primary reason I have a laptop. It gets used maybe once a week, usually at my favorite cafe.
Sorry if I am bugging you with too many questions, let me know
But business laptops, right?
Like you only purchase the business lineup because of the better quality and expectations that comes with a business product
Generally, yes. Either the business lineup, OR higher-end consumer models. Right now I'm rocking a Lenovo Yoga 7i (16") 82UF0015US (i7-12700H, 16GB/2TB RAM/SSD, A370M GPU) as an upgrade from the 2017 Dell XPS 15 9560 I had. Technically, the Yoga series is consumer, but their mid-to-higher tiered models are built acceptably for the price. The Dell XPS was their "consumer" lineup, but really, it was exactly the same as their Latitude business models... just with a different model number.
Can I ask how the dell was and how many years you had it?
I had a very low end lenovo in the past, as my first computer, this was 9-10 years ago
and a tad fancier on the xps.....QC yea we don't go there lol I can go on about it
the haunting nightmare with their trackpads prior to switching to haptic ones.
Bought it in Summer 2017, used it for 6 years (until I bought my Lenovo in Spring 2023), sold the Dell laptop in Fall 2024 for $500 to some kid who wanted their own first computer for Minecraft and Roblox.
What problms did they have with trackspads?
I like my Lenovo legion 5pro and I usually hear good things from other people who get Lenovo legion and LOQ laptops, but they’ve had a few hiccups as well
Yas. That, and QC was definitely lacking in the Thermal Paste department for the first batch of XPS 15 9560 models. Easily fixed by re-pasting the laptop yourself, but still kind of dumb. Dell's not the only one who's experienced this though - HP, Lenovo, Acer, ASUS, MSI, and Gigabyte have all been there, too.
trackpad wobble https://www.reddit.com/r/Dell/comments/gum7rk/psa_regarding_xps_15_9500s_wobbly_trackpad/
I had to get it replaced twice and it still didn't fix the problem so I just shelved my xps 15 9500 after 2 years so it lives on a desk connected to a docking station.
You can't trust any laptop manufacturer these days, all of these problems, and the other day learning on the wan show about asus's g14 and all the other laptops from asus having problems with the firmware
Wait what, you had your trackpad replaced twice in 2 years?
within a year.
Yee, I think a big part of this was caused when they switched to massive Trackpad sizes without redesigning how they were supported. Don't get me wrong; it's absolutely great that "premium" Windows devices started using Trackpads as good as those found on MacBooks (around 2016/2017 ish?), but some of the design implementations were... questionable, at best. Happy my XPS 15 9560 from 2017 didn't have this problem.
Asus laptops I’ve been saying for years have had overheating and clock speed issues, glad to know I wasn’t fucking insane
the issue happened again after the warranty period ended.
That's crazy
You can't trust any
laptop manufacturerthese days ...
Fixed that for you. Most for-profit companies on this planet have little incentive to ensure what they sell actually works as advertised after they've collected your money. Nobody's perfect (we're only human), but we wouldn't have nearly the number of problems we do if a company's profits were properly allocated to R&D and QA processes.
Other than that it still works great docked lol.
👋
The messiah
Why do you have to say such truth bombs

lol can't beat that the artic white version was 
Because I don't sugarcoat things. It's literally against my nature. 🤣
CW should start making laptops, and then move onto phones 
I like people who are direct, just sometimes it's better to be ignorant
I also don't know if it's worth it for my next laptop to go snapdragon
I don't use many applications that aren't arm native, but also don't know if the battery life improvements are worth the compatibility costs, especially with the newer snapdragons that are coming
So long as all the apps you run are supported on Snapdragon, sure. ARM based devices get hella good battery life. However, if you need to run anything that isn't natively supported, IMO it's not worth it yet. I considered buying an ARM / Snapdragon laptop when looking for replacement devices in 2023, but the compatibility issues put me off.
That's what I thought, especially with university, the only things I use right now are obsidian and chrome, so that might be useful for the next 2-3 years for me
At home I use everything, but I am always plugged in
You have 0 experience with arm laptops right?
0 personal experience, but knowing how to Google / Reddit search can get you a LOT of useful information.
100% agree
I have done lots of research and have seen mixed opinions on them
There is usually two kinds of people, the first one that only uses arm native says that it's amazing, everything runs smoothly, no problems, amazing battery life.
Then the second one that uses a bit of obscure x86 software has issues with programs, can't edit videos because of the translation layer, ecc...
Obviously, that's generalizing a lot, but usually they fall pretty well in these two buckets
I think I remember this being flagged by Alex on an LTT video, don't remember which one, it was a long time ago
Maybe I can still find it....
Or... the way I like to describe it... there are 2 kinds of people: those who perform their tasks within a vacuum, and those who understand that vacuum's don't really exist in the real world and thus actually ask enough questions to understand every scenario, including scenarios that aren't relevant to them. 😄 Neither is right or wrong, btw.
TL;DR: whatever device you buy, ensure it let's you get the shit done that you need to do. If it does (and you don't spend more time fighting it than you deem worth it) then it's the "correct" device for you.
He did uhh it was one of those reviews. Forgot when but def a while back.
Protect yourself today by checking out Bitdefender's 120-day trial: https://lmg.gg/Bitdefender
It's time to retire the Dell XPS 15....... and replacing it with the NEW Dell XPS 15!
Check out the laptops at https://lmg.gg/LdTqx
Purchases made through some store links may provide some compensation to Linus Media Group.
►GET MERCH: http://www...
Seems to be the same issue to me, I remember watching this long time ago
But but, papa Linus taught me to enjoy fighting with my devices....

Hey it's the guy from ZTT
ikr
ZTT? That's Zuchini Taco Tuesday, right?
Also I 100% agree with what you said here
Zuckerberg technology transgression
Zoidberg Tornado Tomatoes
A bit of a Weird question but does anyone know how to brick and iPhone 15 pro max?
There are many ways to turn a device into a brick... why do you ask? For what purpose?
Microwaving it
No, that won't brick it - that's how you recharge it to 100% in under 1 minute. 
/s
Opening it up and removing or damaging the storage module
Without voiding the warranty I mean… only via software shenanigans
Oh, no, Apple has their iOS pretty locked down. You'd have to find a bootloader exploit, then attempt to flash a modified OS image onto the phone that can't be recovered from.
Once again, why do you want to brick a relatively new iPhone 15 Pro Max @tidal mulch?
I thought so! I am relatively new to iPhones and recently came across a bricked iPhone 15 pro max and was wondering how would it have gotten to that state.
Could it be refusing to boot because of incompatible parts?
Like as if it was repaired with non official apple parts...
Worked for a while at Apple as a Genius, thers plenty of ways to brick an iPhone. 1st reason: iCloud Lock, 2nd: replacement Part from an iCloud locked Phone, 3rd reason: someone fucked Up an repair
If it was an iCloud Lock, wouldn't it show that it is lcoked on the lock screen?
Anyone know and alternative to this SSD tray? I broke my brand new SSD while trying to put it in.
iCloud Lock does not hard brick the device, which is what the term Brick on it's own originally meant. It's still functional - just needs the lock removed through legit methods. (If the word "soft" were put before "brick" then yes, iCloud Lock is a soft-brick.)
https://en.wikipedia.org/w/index.php?title=Brick_(electronics)&diff=511031424&oldid=509819568
A brick (or bricked device) is an electronic device, specially consumer electronics (such as a mobile device, game console, computer, etc.) that is no longer functional. It could be due to corrupted firmware, a hardware problem, or other damage. The term analogizes the device to a brick's modern technological usefulness. "Brick" is also used as ...
Was that part of your laptop?
Seems like a very custom part
Yeah
And you are trying to find a replacement one because you broke the one that came with the laptop, correct?
However, the laptop is a thinkpad and those SSD trays are sold sperately.
OHhhhhh
Well its bricked Till you unlock it, If you cant get the original owner to unlock it, its bricked
I'm looking for a replacement one that is more accessible. I broke my SSD when trying to put it in the tray.
Damn tray ripped whatever those small pieces are off the SSD.
I don't think you are can find one that's easier to mount, as that looks like a very custom part
Yeah 
Well $h!t
You broke parts off the ssd?
That takes skill
The only thing I can think of is to saw the tray in half.
But the tray is made for that laptop, it should be reasonably easy to mount
$60 down the drain. 🥲
Which Thinkpad model exactly?
Lenovo Thinkpad P50
Can I have it? 
I might be able to fix it if the pads are still there
Only if you live in Canada.
And steal the data
Ohhhhhh, give it to Linus, so he can do another repair video 
I said it's a brand new one. 💀
I live in europe, so not worth it for 256GB
Oh missed that
Page 70/118 of the service manual has steps for this. Obviously, not helpful after the fact, but in case you need it. https://download.lenovo.com/pccbbs/mobiles_pdf/p50_hmm_en_sp40j71944.pdf
These trays are weird though... I've never seen a laptop that uses anything like them. Looks like the trays are supposed to sit in the laptop's housing, and then you place the NVMe SSD on top of the tray during install.
Thanks, I was looking for this. Stupid AI taking up all the search results.
Do you know where the SSD lost components? Cause it might still work if they are not important components
Like I have his phone number or something.
How the fuck is a 256gb drive $60 cad
Linus scam tips
Welcome to inflation hell.
Also US tariffs.
LST
All of them gone. 😭
Bruh... I followed the steps correctly... 🗿 Yeah I'm sawing the tray in half.
https://ca.pcpartpicker.com/product/WcJgXL/teamgroup-mp44l-500-gb-m2-2280-pcie-40-x4-nvme-solid-state-drive-tm8fpk500g0c101 $55 cad 500gb
Like I mean, the design is clearly ass.
This one died in year 1
I switched to the lexus NM790
Cat


I have found another rainworld poster
windows 11 works fine on this laptop apparently.
Weird to see a debloated Windows 11, it's TinyOS?
no iot
it's like a light version or something?
i got a legit copy from my old job so yeah i use it.
its a debloated version basically.
how would I go about force updating an older computer to 11? like ideally without resetting everything
i mean you can update it via the windows update, or download windows 11 from microsoft and install it. if windows update doesnt work you may have to reset it. unsure.
aight I'll look it up then
I want to update my mom's laptop which doesn't officially support 11
i mean this laptop doesnt either, i ran it and it worked, but base 11 was too much for that cpu. so i grabbed my iot copy and installed that. worked just fine there.
Rufus with bypass -> usb -> boot -> keep all settings and files
hers is a very similar CPU (i7-5500U, also only 4 threads) but I didn't think it would be too slow for 11
Hmmmm...
windows 11 isnt the issue, its the garbage thats in the background.
tHe sImUuuuLaaaaTiOooon iSssss CrUuuuMmmbLing. s333NnnnD h3333lPppp. eRrror erRrrOr.
all good
i would've paid the few sheckles more for a 512
Don't need it.
the 512 is also more performant iirc
im glad my furiphone arrives soon when i read about all that android stuff
Furi phone? What you mean by that
a debian based phone with a neat android emu.
looking at the past things i read on android removing sideloading this was the way to go for me.
cant wait for the new version to arrive mid november
yooo
Can anyone help me find some websites or something to advertise me wanting to build pcs for people
I need extra cash
Facebook marketplace, Craigslist..
Craigslist is dead where I live
Uber eats
My friend once Uber eat'sd a PS5
It was doordash or Uber eats or something like that
https://youtube.com/shorts/56AUQmxdpUI?si=U6D14LyzURmkdBYS door dash a meal in a parking lot while you wait for door dash orders
Ohhhh the drama is spicy af with bbno$... we go into full details in todays post show... this is absolutely crazy and has never been done in Financial Audit history... Watch here: ➡️ https://bit.ly/chpostshow
⚡️ Download the DollarWise Budgeting App today:➡️ https://bit.ly/dollarwiseapp
⚡️ Get your FREE Hammer Financial Score:...
Aside from the usual (Craigslist, eBay, FB Marketplace, etc.), only you know what may or may not be available / regularly utilized by people who live in your jurisdiction.
Saw this lol
Guys real talk are the current consumer grade of CPUs gonna reach 7GHz
highest clocked cpu rn runs at 6.2ghz
as technology advances we’re gonna hit 7ghz some day
Yeah that’s what I was referring to like not overclocks and stuff just out of box performance
yea the 14900KS does 6.2
they're talking about stock speeds
not world record overclockers
i remember being happy to see 1 ghz... lol.
lets get you back to bed grandpa
im not THAT old. i think
i was YOUNG. but i do remember the first 1ghz pentium because me father HAD to have it. then i inherited it when it was deemed im worthy enough to have my own pc.
i have returned
This was hundreds of companies when AWS Crashed a couple of weeks ago
Welcome back...
thanks
God I need to do that right now. I keep checking all of the discord chat spaces instead of doing my assignments
but now i have gotten into networking and homelab so i need a place to be a nerd again
Exactly.. Discord is where I feel safe ! The world is scary and full of normies who would probably think I'm odd 😅
Yes but I don’t count that as you’ll have to RMA any 14900k that runs at 6.2 eventually.
I think you're odd

crap.. nowhere is safe. I'm outta here
New micro code doesn’t hit 6.2
So it’s effectively not stock
It’s been reigned back because the chip dies early
So it’s also basically an overclock as it damages the chip
Idk. it would be weird if it didn't
Knowing Apple, I would've thought they would have you install some sort of driver or third party app to read off or write to.
You know?
To be honest I don't mess around with apple when it comes to PCs .
I run a hybrid workflow.
i want to look more into macos
i am increasingly dissatisfied with windows and i havent quite found a linux distro i like yet
Oh yea?? like on a VM or does mac have a subsystem equivalent..
I never heard of such a thing
I have both Macs and Windows machines.
Oh I see lol.. Big pockets huh
I've always been a fan of how efficient Apple Silicon is.
the silicon is quite impressive
i have an M1 macbook air that i can unlock with some effort
I still use my Windows machines as time goes by, but I use my MacBooks, minis and Studio more than my Windows counterparts now.
its in a company's MDM program right now but their IT department is willing to part with it
I'm partial to AMD, but for simple tasks Apple silicon would help keep my energy bill low
why run multiple mini pc's? are you running them as compute units for server applications?
forget the energy bill imagine having a laptop you have to charge once a week
Print Stations
Yea I don't leave the house and laptops are uncomfortable to operate imo
but that is cool
I have a bunch of photo printers and it's part of my business.
ah gotcha
speaking of mac
do any of you know of a working windows emulator for mac that is free? i’d be fine with crossover and the $60/year or whatever but i just want to make sure if there are any alternatives
Parallels?
Yeah, all my Windows mini PCs are still online but no longer connected with my printers. They still work as a backup, but my M4 Mac minis became the primary computer for my print workflow.
i’ll look into it, thanks
Old micro code does hit 6.2
So it’s effectively stock
It shipped like this
So basically not an overclock as it does it out of box

The main point is that it still runs 6.2 out of box making it the fastest consumer chip currently in terms of Ghz
Even if it self destructs you cant deny the fact that even if for only 1 second it still reaches its advertised speed of 6.2ghz
therefore making it “the fastest consumer cpu in terms of Ghz”
such a useless title though
since it's not the fastest consumer CPU in terms of actual performance
Nice hampteer pfp
yea its marketing so intel can say they have the fastest consumer cpu
just like amd did with the FX-9590
2013 am3+ with a clock speed of 5ghz
did it clock high? yea
was it faster than what intel had at the time? no
What flavor
honestly them large lollipops taste pretty bad 😔 😔
makes your mouth all grey with the colouring
Like concrete
Meanwhile steam losing 3/4 billion dollars in CoinMarketCap by their own fault
(Around 30/35% of their market cap)
Who's fault? Lol. The people going off platform or using CS knives as a stable currency for your life savings
I'mHi everyone,
I’m Elizabeth. I’m originally from South Africa and I’ve been living in Florida for a while now.
I really enjoy cooking, hiking, learning about different cultures, and watching K-dramas in my downtime. I also run a small online store on the side — it started as a passion project and has slowly grown into something I’m proud of. Most days, it’s just me packing orders, testing new ideas, and trying to stay curious.
I tend to be a bit chatty once I get comfortable, so if you ever want to talk travel, food, or just life in general, I’m always up for a conversation.
Happy to be here and looking forward to getting to know you all.
you new to this whole “internet” thing or are you selling something
bad rocket nosecones go into the noscone stretcher
this is what im gonna have to do for mine
Guys I need a funny SSID for my network any ideas?
hacker-0F1B
or a empty letter
empty letter seems like a cool idea
I ate a cookie and im pretty sure it went bad
Empty letter doesn't work
Any TV experts here rn? In the market for a new TV, someone's selling a used LG B6 OLED for $300. Price seems a little steep based on how old it is, but idk what the secondhand market for OLEDs is like
rocket to banana island
Cleaning out the attic and I found this gem. Anyone guess as to what’s it is?
a pc case
all the tech or just the tips
Damn nice. Yea think that's before I started watching
Wait.. After? I don't know when I saw the Intel box be opened but thought I started watching them in 2017
The good ol days
On an infinite time scale? Sure
internet being weird
Do you use a bike?
I think this is impossible...
Ye no add is impossible
rate
MSI MAG A850GL PCIE5, 850W
ASUS B650E MAX GAMING WIFI
Kingston NV3 2TB
Kingston Fury Beast RGB 32GB 6000
CM ML240L C
AMD Ryzen 7 7800X3D Tray
Phanteks XT Pro Ultra Mid Tower
ASRock AMD Radeon RX 9070 XT Taichi OC
paid 2k usd
Looks like 2k
rate? ummm 60,000 usd/hour.
Obligatory hello there
?
Love you dbrand
this is cringe
lets literally donate money to the overpriced sticker company 🥀
Sarcasm does not compute 🤣
While, I doubt it would go through. I’m not gonna try.
Yes I’m being sarcastic about living dbrand should be very obvious lol
I dont know you
rpm right?
It seems like you don’t know people in general lol
bless your heart
Thanks to our LMG clips sponsors dbrand, Dell, and Secretlab. You can check them out at the links below:
dbrand: https://dbrand.com/pcb
Dell: https://lmg.gg/dellprowanclips
Secretlab: https://lmg.gg/secretlablmgclips
Linus and Luke discuss Samsung’s new Galaxy XR headset and whether smart glasses could ever replace our current methods of int...
did he just fart at 0:14
its blue man
We kinda have I’m pretty sure most computers are not desktops. And even laptops have been eating desktops lunch for like decades now
Pretty sure no? Linus seems to be kinda rocking on his chair rest
i was about to call him "linus gas slips"
No bless yours. You’re so innocent not to understand humans it’s quant
💀
sigh
very cool bro
What did I wake up to
This has full on “hey fellow kids” energy lol
are you doing a bit
the words "very cool bro" are full of ""hey fellow kids energy?""
is this reddit mod persona a joke or are you actually being this cringe
you’re using such old and cringe sayings it reminded me of a boomer trying to be cool lol.
You’re using cringe in such a well cringe way. And saying “Reddit mod persona” unironically you have me 💀
it was the chair i think
chair
If you say so but I doubt it you don’t seem to understand humans

we can use our listening ears and close our mouth
hmmm
12 MacBook Pro
132 MacBook Air
no chargers
Hey compsci nerds I need y'all's opinion on a shitty joke I wrote for extra credit on my operating systems exam:
Why couldn't Tux cross the road? ||because rm -rf road||
sup
whats the point with all the laptops
guessing they are either broken, or icloud locked
i'd be shocked if they were even 80% usable
do you have a need for 8 pallets worth of APs
honestly, that wouldnt be bad for a school or something, i could definitely go get that no problem, like a 4 hour drive :P
Guys, what is "headers and masked link markdown"?
cause i sent a message that got blocked here that included stuff like
this
But I had no links anywhere
headers are the big text
I didn't have headers in there either
screenshot what you were trying to send
Look carefully at the codeblocks
One of them is very much formatted like a masked link
Ah, I see it
the exports line
I'll try that with a changed look
That worked. Ty for pointing it out
So nothing with [] next to ()
I could string them along my work commute so I never need to use my phones data plan
I’m just imagining a line of APs being dropped out the back of a car like depth charges
Fast as fuck lmao
when the servers decide to function lmao
ive only really gotten ~ 3gbps max from steam
no cpu unpack bottleneck
no ssd bottleneck
OK OK
Riley just made the single best ad ever made, I skip EVERY ad EVERYWHERE
I watched both ads multiple times in the last video
My peak got me at 3.6 my network can handle 5gb
ive been just swapping servers to see which one gets me the fastest download speed
the philippines has pretty good results
And I know my bottle neck my m.2
im assuming cuz no1 has a fast enough network to stress the servers
what ssd r u on?
That’s hilarious I’m on the Seattle severs
That one is a 1tb Samsung evo
ive been swapping through all the southeast asian servers ngl
O im on a PM9A1A
I got fiber optic like a year ago and it’s probably the best thing ever
imo >1gbps is overkill for home networking
didnt really feel a diff transitioning from 1gbps > 10gbps
If I ever get serious on making a nas I might do an overhaul on my storage in my pc. But as of rn I have all of my storage drive since my first build I’m 2015
For me the price is negligible between the 1gb and 5gb and I was paying more for my coax internet and it’s dumb with camcost
Hi, how long should i expect a new gaming laptop to last before i need to get a new one?
I dont have too much things to store 2tb local storage is enough for me
Dependes on specs of the la top
the 1gbps plan was like $50 back in 2015 for me
now the 10gbps one is $30
What specs do you get for like 1500-2000€?
I get that
That a great budget id say 5plus
Ok thanks!
You want it for gaming?
yea it gets messy
Yeah luckily I have the space for it all in my tower
But I have 4 large moving boxes of DVDs I’d like to throw on a nas one day
Yea, and a little game development
That’s out of my scope maybe invest in a tower depending on how much rendering you have to do
No, its like REALLY light game development, so like only for gaming
But symmetrical 10gbps is only $140 a month
Oh then yeah
45€ / month for 100Mbit/10Mbit Coax 
so many 1TB's
How much less performance for the same price do you get out of a laptop instead of a pc?
The desktop RTX 4060 is roughly 15% to 35% more powerful than the mobile RTX 4060 in most applications
as an example
Access your devices securely from anywhere with TwinGate: https://ntck.co/ai_terminal
Still using AI in the browser? You’re doing it the slow way. In this video, I BREAK OUT of the GUI and show you how AI in the terminal (Gemini CLI, Claude Code, Codex and OpenCode) makes me 10x faster. We’ll install the tools (Mac/Windows/Linux), spin up...
what
he inhaled to much coffee again
That is including the fact that mobile 4060 will get hotter faster than desktop 4060?
Becouse of the worse cooling on laptops
well yes
its smaller so ye more heat
Ok thanks
discord isn't even capable of showing embeds from the discord gif menu anymore
but honestly ai in the terminal is all fun and games until it decides to give up and delete everything
thats really expensive
mines $30 im pretty sure thats average pricing for developed countries

1gbps is overkill for the vast majority of homes
i got 100mbit/10mbit at home but 2gbit/2gbit at my vacation home
vacation home / datacentre
Where TF are you getting 10gig symmetrical for $30????
What?
austria is 170€ / month for 1gbit, 50mbit upload via coax. and around 80€ / month for symmetrical 1gbit where fiber is availible.
croatia has 1gbit / 500mbit for 23€/month or 2gbit symmetrical for 35€ / month
none of this is 10gig
hiii
hello?
What's the point of a self cleaning station that you'll need to clean
I finally got the system up. Any luck on the CPU?
If it's not plumbed I'm not interested
add a integrated pressure washer and you got me
Unleashing DJI roomba on my driveway
Because it can clean itself multiple times before you have to
Those water tanks look suspiciously tiny ngl
And I'd assume you can clean the station while the robot is still doing it's job
Still multiple times bigger than the ones onboard
No it's tiny
you can't actually
The one my mum has has like 5 litre tanks for both sides
at least not fully
that's about normal
Yeah, that's why I'm saying the ones in that base station look 
most of these won't let you start the base station cleaning program while the claymore roomba is cleaning your home
Why is there a cleaning program for the base station
Kill it with fire
flush out the dirty water from the hoses that usually collect the dirty water
Call me simple but all I expect a base station to do is hold water tanks, a dustbin, and charge the thing
if you don't do that it starts to smell real nice
but it's something you do every ~3months and it takes like 5 mins
Just clean the floor ur self or get a maid, lol
Child labor is always the answer
jump?
Vault?
Mountain
If i download windows 11 on an unsupported pc, using Rufus for eg, will it still be able to get updates and support?
yes
erm who here has been building pcs for a while
One is an external
Maybe
u will but constant cat n moues between micrsoft and the bypasses
Support, no. Updates, maybe.



