#public-chat
1 messages · Page 1335 of 1
I have 40fps on the lowest lol
Download it
10 fps difference and it became good from gross, god damn
Thing is I can't play cause I got very slight stick drift and they have no setting for that
You're an idiot. The little number isn't the only thing that comes into play when it comes to how it feels
well youre even more of an idiot to not mention 1% lows
130 with stuttering is uncomfortable
No, you're both idiots
only if you mentioned
Who cares about fps as long it's above 60 it's playable it's not like it's a online pvp game
Enjoy the game for the game
i do care
It's not 1 percent lows. It's the game being so poorly put together that it hitches, I've looked at stats while playing and on paper nothing should be happening.
The optimisation mod goes into details in the read me about what's actually happening there
below 80 is really unpleasant for me
You do you ig
Same
I'd say I'm fine at 60 but for an FPS game I like 80 at least
Says the guy making a sequel to super 8
Nobody liked the movie Bob, time to move on
It also fixes the issue where FPS will drop to 30 and textures start floating around
At fps anything over 72 is useless cause I got a 72 hz monitor lol
That's not true, higher FPS on a low refresh rate monitor still feels better.
Need me a oled panel not just cause of games but also movies
I think LTT have a whole video about this?
I never felt a difference
You sound like my wife
not on all games******
Lmao
atleast on cs2, its true
your inputs are based on your fps, but thats not same on all games
Given that we're discussing an FPS it's going to improve responsiveness on all of them.
I've tried csgo,minecraft and even half life 2 and all have high fps and none feel different
For the majority of major releases it'll matter
and linus did talk about this when he tested 240hz or so with shroud in a big gaming place
nope, not every game has input thing based off of fps
But you haven't felt a difference because you're always playing above 75
....ya, but the majority do.
some still take your input from their own limit and not fps
I mean most games I play I'm between 60-80
not sure, ive yet to see a test about it
You can just look up how they handle inputs. Christ it's like talking to captain pedantic.
Everyone in this server is always so desperate to be right and it's so abrasive
look up on where, their wiki? 💀
Download it, go to paks, make a ~mods folder, extract it there. You're done
Thx
No worries, use vortex if you really want, I like mod managers but some people don't.
All personal preference.
yea no im not gonna go down a rabbit hole of searching input mechanics of 100 games, thanks
Then don't?
youre the one suggesting like its a viable option lol
You asked how
I showed you how, whether you do anything with that or not is up to you
sure
I could care less what you do.
I only use mod managers if I use allot of mods but for few it shouldn't be needed
no need to mention the basics
Same, my cyberpunk more mod than vanilla at this point
You'd think, right?
I love on the wan that Luke and Linus basically said "ya we're not moderating the discord". Not you guys but it was so annoying to hear that they just don't care about this place when you see newbies come in and get torn to shreds constantly
I don't think my 1050ti can handle cyberpunk lol
Dude it's time for an upgrade. Get a 5700 xt
Similar performance to a 3060 ti? I think
I'll upgrade eventually step after step
Or no, just the 3060
Getting a free mobo and 16gb ram in January and for Christmas I'm getting a cpu for it aka a 12400f
For bday I'll get a rx6650xt or something like that
Oh man I feel for you. Let's hope we can put this behind us!
Oh man so they're abandoning us?
@dense quail I used to have a decent card aka rx590 but it died and pawn shop couldn't give me a similar gpu as a replacement so I took the 1050ti cause they either had super cheap cards or way too expensive ones
It's went from like a 1050ti which was 60 to a a4000 or something like that for 400
Better a 1050ti then no gpu
Also there's 1 pc I wanna own for fun and it's the apple trash can looking pc
Abandoning implies they were here at all
@dense quail does compiling shaders also take a while for you?
Damn
Idk how to load in the mod so I'll just press continue
Gonna take off my side panel lol too cause don't want anything to overheat
ddr4 right
cool
He's gonna upgrade cpu later on too
Also he wanted 4 slots and not 2 so yk another reason to upgrade
It does for everyone
They should really add a dead zone setting
Oh no, that's so horrifying. 😱
4 ddr5 dimms?
Ig so yeah
unless theyre gonna manually tune and get good binned ram etc thats only gonna run at jedec
He's scared to oc anything and tweak which pisses me so off
would strongly advise against 4 stick ddr5 unless they need above 96gb then
Took me a whole week to convince him to enable xmp on his laptop
2x48 is the highest capacity that can properly expo/xmp to 6000 cl30ish with little to no effort required
if you go any 4 stick it runs 2dpc which is a lot slower due to signal integrity
I see to him it doesn't matter nor he will be able to tell
He played on a laptop 18 fps and said It's playable
I'm happy cause I'm getting free ram and mobo
🤷♂️
By April ill have a pretty respectable build i5 12400f,16gb ddr4 ram and a rx6600 or rx6650xt
Something like that
Is this an AI?
Hi
hi
Hi, just joined!
Welcome
I'm surprised there isn't a "recent videos" channel.
hi guys
Dunno if any LTT staff might see this, but if Linus wants to make that 3D setup permanent, I may be able to help. I indeded to do that myself at some point in the future and have some gear in storage.
ask on the ltt forum
Someone said a 50hz tv is still capable of doing 60hz. is that true
hi everyone
They don't
Don't see this? Or don't want to make the setup permanent?
@nimble furnace you're not a passer by here?
hi
hi
This place was pretty much abandoned by LTT
hi
Hey everyone!!!
not abandoned, it's a community server for the viewers.
if it isnt software locked weirdly, sure ig
but it might die
print farms of prusas all look the same, it's not a big deal
Their system is as permanent as prusa farms get
Unlike most of their communities it's not actively moderated, at least to same extent
They said as much on the WAN.
It's actively moderated, it's not a place of community engagement
Not to the same extent
They literally said on the wan
The staff are free to talk in this server, but they aren't required to
lol
I don't want them to talk, It's more about actively picking weeds to keep your garden clean. It's not really done here
Moderators exist to moderate the server
Hi everyone. Would anyone here get a phone plan without network facts now that it is a requirement. In my mind if they are breaking the law before you pay them they will break the law afterwards. The subject of this is boost.
there's a team of them + warship
If it's a requirement by law then no
what you said is effectively the nicer words for "I want censorship"
Censorship isn't always bad.
Yeah depending on user base size last cut off was October 10th of this year
God I hate editing youtube videos
Free speech only matters with words you don't want to hear
This is a private discord server you moron. You don't have free speech here.
Privately owned, I should say.
It's owned by an entity of Canadians lmao
Before captain pedantic makes an appearance.
So? free speech doesn't extend to you not being banned or muted in a discord.
Understand rights before you try to use them to win an argument
oh you took it as an argument
that's crazy
Moderators only exist here to keep the peace
If someone is actively disobeying rules then there are consequences for such
if someone's just being annoying, the mods aren't gonna say anything
if someone says something you don't agree with, they are allowed to say that
You can't stop them
You face no legal repercussions by saying anything here.
Say anything bad about xi on WeChat and you bet you're being hunted down
See? free speech.
That's not true either. If you were inciting violence in a discord or doing something otherwise illegal you could face legal repercussion. When using services created by a private entity you don't have free speech.
hate speech is still free speech. You may get muted or banned but you will face no legal repercussions for it
You're an idiot. You can absolutely get in legal trouble for things you do on discord.
"Social media made y'all way too comfortable with disrespecting people and not getting punched in the face for it"
Mike wasn't wrong when he said that
You can't
Your data on discord can be used in the court of law against you, but nobody would incriminate you on discord chats alone
lmfao my guy
I'm done with this. I actually can't
Good, now go away
thanks for the selfie, I'll pass
The harder
I know times are hard feel free to project
in optimized titles
I always wanted the arc stuff to become popular
from what ive seen they have slowley been picking up speed
hell my setup isnt even optimal for the a580
running a r5 4500 with pci3 and from what ive seen arc gets held back alot by lower end CPUs and pcie3 holds it back more
so the fact im able to play most games at 1080p high and some at 1440p high is impressive
arc iirc just relies on rebar and dx12, PCIe gen 3 doesn't change that
ive seen a difference, game dependent though
for example ratchet and clank rift apart despises the card on pcie gen 3
youd be surprised
it's a 16 lane PCIe connection
yeah but it still prefers gen 4 for some titles, mainly ones with heavy texture and asset streaming from an SSD
a 4090 barely saturates a gen 3x16 connection
a580 is not swapping data in and out of vram faster than a 4090
like i said. its some games many just dont care, but some really do care for somereason
there's no reason
i dont know enough about graphics rendering to explain how it works beyond its just weird
unless the system tested with gen 3 doesn't support resizable bar
that's the part that actually matters
got full rebar on the gen3 system
Gen 3 vs 4 makes no difference
hey im not saying there is supossed to be difference, im just saying there is one weirdly enough
I'm saying that claim is false
sounds like mike ross to me
look im just spitting what ive found, it seems to be weird edge cases that could be solved through further optimization
McDonalds
mmm macas
AUSSIE DETECTED
eay! im not even aussie though ;-; my friends made me this way
hanging around em for so many, many years has led me to picking up a few words and phrases
maccas
Pardon, have we met somewhere before? I don't have a recollection of ever knowing you.
If somehow we have met in a different server, please forgive me; I forget everything once I leave that particular server.
yeesh... 2017
What? Why? How?
3 questions that I asked myself when I say that message
Idk I got bored so just tried to find one of the oldest messages.
how, well it's easy how.
That's lame and annoying
Valid
I just went on pinned messages and clicked on it.
And then scrolled a bit down
L
I dint think he cares how you did it if he calls it lam and annoying
AAAA tryna delete my binance account from back when i dabbled in crypto like a fool, never lost any money from it luckily but holy shit do they make it difficult to delete the account, ive been on chat with support for the past 2 HOURS?! outrageous.
lol
lol
yup lol indeed KEKW
fax
the fookin cs agent send a damn ❤️ emoji da fuk, bare unprofessional.
for contect she told me to wait 5 mins i replied ok and she sent a heart

its painful to watch, i have screenshots cause theyre bullshiting so hard saying i had some P2P something open, checked the account myself and there was nothing there so at that point i was like nope, screenshot everything.
theres a hot 1 penny in there, i was like KEEP IT i dont want the penny just close the damn account and delete the information
pay to pay or wot
honestly no idea KEKW
pay to win games extended real far
peer to peer
AAAA they dissconnected the 2nd agent and are connecting me to a third now FFS
Yep my pc is fucked
Been there
324
hot singles near your area
BROOOO i waited 2+ hours only for them to tell me the agents who can actually help with the problem are only working on weekdays. WTF
the dork coner
the lore is just so much cooler than the toys 😭
i guess the artworks raise the expectation a lot so the toy cant catch up to it
Joytoy, chinese company
Nah but you can strip them. The guy in the back was re painted by me a little
sick
oooo yeah daily redbull :p
finally got around to making an LTT forum post on the cloud gaming server
Never been to a microcenter I don't really need anything but since I'm in Dallas I might as well go. Anything I need to know before I go in?
their open box deals can be really good and the hardware bundles can be really good too
Gotta buy a Bawls, its tradition
I bought one when I went and it was so ass
Most tradition sucks
I didn't realize it was an energy drink
Welcome to it
The orange one isn't bad
i only drink monster ultra flavours for energy drinks
I thought it was a normal soda
I was expecting it to taste like it
I don't really drink energy drinks period I just drink coffee
You should like
Read the bottle lol
I'm already having an unhealthy amount of caffeine I don't need sugar in it too lmao
It was raining so I couldn't leave yet and I was thirsty
When I say raining I mean pouring and we had a bunch of hardware we had to take out of the building
Peer 2 Peer surely
Thermalright Pearless assassin ? 🍐
Why does my system run way hotter (+10-15C) when I turn on +200mHz with PBO?
PBO runs great when just set to Enabled, and my CPU has overkill cooling.
For like a 5% improvement the temps shouldn't be rising by this much right
depends what your motherboard does when you turn it on, some motherboards automatically set insane power limits that are not needed
are you sure its on a stable mhz without pbo?
saying +200 wont do the justice if its not stable before pbo
Yeah, constantly runs at the max boost under load
It's a 5600 and I have a Phantom Spirit for reference
also, i would say to go to #overclocking as they will know what questions to ask and will have much better insight
what are yer normal temps
Yeah I think that might be it, I have a B450 mobo that already runs an unnecessary power limit
5600 should generally be FANTASTIC at overclocking too. its one of the best 5000 cpus for it
40 idle, 70 load
yummy
+200 shouldnt add that much more to that
Yeah exactly 🥲
yea thats why he should overclock it manually and watch the voltages
not at all, pbo is a far better system for zen3
manual OC generally cant get anywhere close to it without bigger voltages and more amps
its generally accepted by overclocking people, to be somewhat magic
i remember it to be opposite somehow lol
Marketing reasons mainly
marketing makes the feature magical? sheesh
no wonder nvidia has lots of weird naming for marketing
its an algorithm that takes into account, a lot more than you would think, and will boost as high as it can, up to the various limits
1660 ti was something
cool
ask in #overclocking for confirmation that pbo is magic
i got 1660 super and no, its not ✨ something ✨
deal
Hey can someone help me, my phone's screen is somehow f'd up all the black colour turned to greyish(its an iphone 13) i didn't even drop it or nothing
Its like all washed up
its universe's way of telling you to get a non-apple phone
I have an android too lmao
have you accidentally turned any of the display accommodation features in accessibility?
No everything is off auto brightness low contrast everything is off
im out of ideas then 😄 thats the usual culprit 😄
is auto brightness turned on/
I don't think its a screen issue for sure
or greyscale mode?
Tried it withboth on amd off
it will be one of the display or accessibility settings somewhere, its just figuring out which it is
Everything is off in accessibility
On the apple support page many people had this issue and said it was due to proximity sensor due to calls
And they fixed it by viewing hdr picture in photos
But its not working for me
there is likely a sensor test app on the app store somewhere, i would suggest running that to check that the proximity sensor hasnt failed
Um let me check
voltage increases heat
🤷♂️
pbo generally does not increase voltage
thats usually the reason for higher temps
if you undervolt + oc frequency it usually stays cooler
Couldn't find a sensor testing app
and thats what pbo is supposed to do
he mustve done something wrong then
what wonderful insight
im betting he used ryzen master and that messed something up
never oc with software
firmware is still software, you are allways OC'ing with software
i meant like always do it through the bios
what you shouldnt do is use software that claims to automatically figure out what the best oc is and automatically do the OC
^ true
but changing your settings via UEFI bios or Ryzen Master, is doing the exact same thing via different routes
ryzen master is kinda fucky and can set some weird settings
only if you set them yourself... it does what you tell it to do
pretty sure it has an auto oc mode
in bios you just tweak it and set and forget it
you also forgot for zen2 upwards there's no 'safe' voltages for manual OC dude
ryzen master also has that 'fun' advantage of, randomly increasing voltage to suddenly nuking the cpu, which in of itself is a large reason to not use it, and to do the OC in the bios directly
ryzen master is the tool that AMD produce
What're ya sayin' to me? ya walkin' Calzone
is it appropriate to buy the i7 14700 now?
Are you upgrading?
no im building a new one
I mean sure
warhammer goy spotted
Not really? I mean they are both good but the amd has a 3d vcache
wdym?
But honestly 14600k would even be great
is PRIME H310M-E R2.0 compatible with Ryzen 5 5600G
im trying
but i cant find anything
you think so?
Are you just gaming?
was just about to say the same.. its an intel board... 😒
ye
Literally the first thing that pops up, could also just look at the socket. What the fuck is this place.
was thinking to pair it with a 4070 super or ti
its not even a hard search to make too https://www.google.com/search?q=prime+h310m+cpu+support
Yeah 13600k or 14600k is plenty. 7800x3d is good but not necessary
I run 13600k with 4070. Its solid
but the new gpus are coming ... idk if i should wait or not
scalpers gonna be selling those for 1000 plus
if u dont have a pc and ur waiting for a 5090, u can wait
if you NEED it now... buy it now... if you dont NEED it now... then why waste your money on something you dont need
god shaders compiling is so fucking annoying. I hate it so much
Christ why would you be using a hdd
cus i got it for free
If someone handed me human fecal matter for free I wouldn't eat it, ya get what I'm sayin'?
especially when a cheapo SATA SSD, costs about the same as a pair of socks now
i have 2tb hdd so its pretty okay tbh
Yup, even mid range ones are cheap as chips
i think i have seagate
What do you use it for
i dont have a reason to not make use of a free hdd lol
socks are quite expensive there lol
not really, just that SSDs are very cheap
SSDs are cheap and easy to find
Heck you could just salvage old SSDs from e waste at this point
Laptop ssds work with desktops? I think some do for sure.
buying hdd was stupid idea lmao, im so fucking dumb
even if you have to have new... the no-name china SSDs are fine too
2.5" SATA SSDs are the same, laptop or desktop
but for backup its kinda good
I have a stack of free hdd. I dont use them. I collect them, wipe them, and then stack them so no one can ever use them until i shred them
i have this in my son's PC as a cheapo SSD for his games... and ive spent more than this on a single tshirt in the past: https://www.amazon.co.uk/Kingston-A400-Solid-State-Drive/dp/B079XC5PVV
Kingston’s A400 solid-state drive dramatically improves the responsiveness of your existing system with incredible boot, loading and transfer times compared to mechanical hard drives. Powered by a latest-gen controller for read and write speeds of up to 500MB/s and 450MB/s¹, this SSD is 10x faste...
I wont stop until all the hdd are gone
theres an IT shop near me that "buys" all the cheap HDDs from facebook marketplace... runs a forensic analysis software over it, and reports people to the police when they find images on the drives that shouldnt be on there
exactly, always gotta do it in bios
pay me 300$ so ill ship my hdd to you and buy another 1tb storage unit of ssd instead, deal
Thats a bit excessive
thats expensive for a new SSD
shipping included™️
Could buy a lot of ssd for 300
but cant ship the hdd half way across the world
Wait,how much 300$ will get you SSDs?
Imagine
depends
I mean,this is more question maximum number than anything else
if you want just ssd and nothing else, u could fit 15 ssds into that
USB flash doesn't count
ofc lmao
3x good 1tb SSDs would be easily done with $300
Oh,20$ dream alive
https://pcpartpicker.com/product/DZkj4D/silicon-power-a55-2-tb-25-solid-state-drive-sp002tbss3a55s25 cheapest ssd per gb
Oh,6tb is viable on 300
easily
i'm checking ebay to see if you could do used enterprise drives to get even more
so far with just what's on ebay you're able to get better quality drives in the same price but not more capacity
What is the difference beteeen led and qled? And is it a big difference and better upgrade
Qled has better colors (gamut and accuracy) and higher peak brightness
Bog standard LEDs are cheaper and draw less power
Qled is better between the two if it's in the budget
Ok thanks
on average, not always
you can have inaccurate qled
usually they’re over saturated
which is not necessarily a bad thing but it can be annoying when it comes to skin tones
Does the nvida app not have an fps counter?
For lack of a better server at my disposal to ask this in, anyone else's Quest 3 no longer showing an option to shut itself down after a period of inactivity? For probably the past week my headset only goes to sleep but doesn't shut down, and I just went into power settings and now there's no longer a setting for how long it will stay in sleep mode before shutting down
Does Elijah actually buy Bell Delphine stuff?
Huh???
as far as I know, yes yes he does
there was too much of it in his upgrade for him not to
its his life, its his money, he can do whatever he wants...
my point being it's not really something to gawk over; just observe and move on
yeah, you are free to judge him as much as you want, but it doesnt change anything at all
what you should be judging, is david's hair style
I hate Outlook
#rant #outlook #microsoft #windows #mail #email #angry
y'know i am honestly impressed at microsoft's dedication to shit like this
especially with how rapidly this situation seems to have degraded in just under the two years since i switched to a mac
like, this is levels of consumer railroading and spite i never even thought possible
at this point how much is windows really "yours" anymore?
Yeah, I've been trying out Manjaro on my laptop recently and it's kinda crazy how much it doesn't get in my face wanting every byte of my personal data lmao
i will say tho i understand people who don't wanna drop money on a separate mac and then still have to fall back on windows because macs can't do everything
Anyone watch anime? Got a 60 day Crunchyroll code I can’t use it’s for new members only
but good god if i was still dailying windows i think my blood pressure would be like 20% higher than it is now
I used Manjaro Gnome cause it gave a big MacOS feel, but I love the overall look of KDE Plasma more tbh
KDE 6 is awesome
Yep, love the feel of it so far, and its honestly made this laptop feel a little overall faster haha
it def does that and i have it overly customized
Haven't got that far yet, just installed so it's very much bare bones
im gonna make a script that gives the mac os open and close animations because i might need it on my other system
I got an other 15in laptop that's a little newer hardware wise. Prolly gonna keep that Windows for the friends and family that want to do something quickly. Don't want to go through the process of teaching them how to use the OS that's foreign to them
If I like it enough though, on my desktop that I'm building I may go the dual boot route and use this as a daily and Windows for the few online games that don't support Linux yet
I still play games like Battlefield and CoD, which explicitly don't support linux thanks to anti cheat, so while I still play those I'm stuck with Windows lol
which battlefield?
Mainly 4 & 1, but I did get into a 2042 kick recently
4 and 1 work without issue
i run 4 on my system
although you need to install the windows version of punkbuster via wine
also check protonDB and search your games
Battlefield 1942: Secret Weapons of WWII Demo 
Which Proton? I tried all the ones including experimental and I'd get the start up splash screen then crash
protondb is a website
to check game compatability
try using protonplus and installing protonGE 9-20
is there even jetpack in those Battlefields? 
Yeah, I know what DB is. Its what got me to try it in the first place lol its figuring out which version of proton that I can't really figure out. I've gone as far as to install ver 8 of proton and nothing works 
try proton plus its an app to download protonGE versions
which arent on steams downloads
I am mad at asus rn
I'll give it a shot when I have the Desktop built. Man why can't companies play nice with linux lol
why
Did they find a blemish on your device and refuse to fix whatever is wrong with it?
easier to just keep doing shit for windows
Fair and linux still barely makes a mark on overall OS usage after steam deck compared to Windows
I have multiple devices of a lot of OSes except mac because fuck mac
Honestly MacOS isn't too bad as of late
Still wouldn't choose it over Linux and Windows but it works well on a laptop
MacOS is great for a daily driver/student OS. It can do more intensive work, but I would still go Windows for something like solid works or any kind of dev work
If your workload supports it MacOS is great.
If your workload supports it [operating_system] is great.
If you are used to running software that doesn't really support it though, and aren't willing to use alternatives, it isn't.
gotta love it when you download a game and then try and run it and this happens
dev work
i refuse to do software dev on windows
Redis?
i genuinely don't understand how people can stand windows for software dev (aside from games and the like)
i have no idea why it does this
visual studio... thats why
visual studio is a steaming pile of shit lmao
visual studio is literally on everything
its windows only
no, vscode is on everything.. visual studio is windows only
am i stupid
Proton, redis... etc
the discontinued macos version of VS was basically a xamarian editor
ah fair i guess i can just wait until its done
no, its just not something you like to use... its objective very good and very powerful
oh so it’s Stupid
You might not like it, but it works for a lot of others. Espically with WSL, use the power of linux and still leverage the insane compatibility of Windows without needing to run a dual boot setup.
Floatplane editor when
looks useless to me
lol aight
VSCode is a great editor. Highly extensible and low barrier of entry.
ideworld
i have no beef with vscode to be honest
made my own scripts for the first time
what about it
i just hate kwin
You can always use something else if you want but I find VSCode easy to recommend to people that just want an editor that works. People that want to tinker will find the Vim and Emacs all by themselves :p
i think using another wm over kwin when using kde is always a better option
🤷🏻 oh well
yeah vsc is hard to fuck up
havent had any issues so
it also likes to hog ram like a bitch lmao
what about neovim
vsc plugins be like: mm yes ram
window swallowing for awesomewm
It's Vim just a different scripting language. Another valid choice
wow thanks bling
no it’s vim with a cleaned code base and lua expandability/config file
you can get tons of extensions for it
Yeah, vim with a different scripting language.
I used vsc a little for learning a bit of coding (just thought it'd be fun to do) and honestly wouldn't blame people to stick with it. Simple and straight to the point
Lua is a hell of a lot better than Vimscript that's for sure
guys, how to enable secure boot on bios? I have a MSI mpg gaming plus z490
you look at the manual
Figure out which button to spam when its turning on and its ez from there
vim sucks ass, nano ftw
which button is it usually
tbh the only decent rust experience is still on vscode for some reason
rustrover is... ok i guess
its in the manual
also google
which will likely find it in the PDF of the manual 😄
Or a handy dandy AI overview that totally won't be wrong
also on google and in the manual
update to windows 11 ohhh yess stop forcing me microsoft when im not even supported
guys I can’t get into bios, I spammed delete key bro 😭
spam f1
I restarted my pc, do I shut it down completely and then turn it on
you can still use win11
but yeah i havent updated either
Why do that when they can just force it down your throat and make you want it. Maybe even get you to buy a Surface if they're annoying enough
i hate w11 performance
shutdown would be better gives u more time on the boot screen
waiting w12 
surface my a$$ i paid for this pc back in 2018 or 19 and im using every single bit of it till its dead
can I spam both f1 and delete key at the same time
yea
Win 11 actually performed better for me
Not if MS can help it!
i have no choice but to use win11 cause i have the latest hardware
Waiting W13. They're making Cortana into a waifu that version
it’s not working 💀
im seeing is latency delay, probably its my shit cpu
7 years already wait i got this back at 2017 time flies huh
better switch from windows sooner or later then
nope didn’t work, what’s the button bruh
i personally almost have a 1% pc, not quite yet tho
A little cousin of mine updated my system thinking it would help run Minecraft better. Stuck with it cause I haven't cared to go through the setup process lol
9950x, 64gb of ram, 7800xt
i would have been so angry bruh
i got linux running on my t460 thinkpad and im liking it a bit i can even use spss and some sht i use at uni and work
oh hey i bought a t460, arriving in 3 days
£30 btw
who let him touch
I was a little, but they were like 6 at the time and didn't understand what graphic settings were so I got over it quick
I needed them to stfu while I was building a PC for his dad lmao
niceee dam u got a baragain bought mine for 120 bucks usd shame i wish i had a good bargain like urs
to be fair i spent like 4 days stalking ebay for dat lol
I’m on my bios, how to turn on secure boot
also it’s missing an nvme, but i have spares so it’s fine
what mobo u have
MSI mpg z490 gaming plus
it uses brick type sata not m.2
google it
converters
although i can just buy a sata if i need to
iirc i have one
sent ya a link in ur dms
a What
we sending kinks now?
what the flip
❓
Really in the future, we can download kinks
yeah but wouldnt it just cap the read and write speed or nahh??
the spare nvme i have is a 256gb intel tragedy so it shouldn’t be much of a loss if it does
fair enough
might look for those converters
ma only downside for the t460 is that it only has one slot for storage
i see i see
catalytic converters?
sata to nvme
but if its just for paperwork and light photo editing the i5 6th gen can do well enogh
that doesnt exist?
at least i dont think it does
but it can
paperwork does not exist
chances are i’ll use it as a server lol
i have another thinkpad (and more to come) to use as actual thinkpads
for 40bucks thats a cheap way
thing i love on he t460 is that it has a swappable battery when i go to my grand parents no internet and power i bring 3 big chungus and itl last me a a day or two
erm what da sigmo
ermmmmmmmmmm what the flip
I think google Gemini has been training on Reddit and X too much
it already has been
glue on pizza was enough and that was months ago
but u/spez is making bank off of this
obligatory fuck u/spez
Reminds me of Bing AI/Copilot trying to make you have a parasocial relationship with it 
Anyone have any ideas why a laptop would just stop charging work a perfectly good charger? My main laptop stopped charging a few weeks ago and now my gaming laptop just shut off mid game and won't charge.
Two laptops both with working chargers tested with multimeter not charging or lighting up charger LED indicator
Are you trying to use the same charger between both?
What laptops, what chargers, what plugs, what voltage
Or discord
and what caliber
No they're two separate laptops both with chargers reading fine on multimeter
..... What is fine
Ones a asus vivobook one Asus A15
You can't just say "fine"
The chargers output
They're all funtional
Tried 3 different charges on the asus vivobook
.45 ACP of course
I mean this all said, I literally only have USB C charging in my house.
All reading good on multimeter
The numbers Mason
wat do they meaaaaaaaaannn
Sounds like user error
That makes no sense lol
Not a whole lot of potential user error plugging in a charger.
You'd be surprised lmao
Plus the A15 shut down mid game full charge then wouldn't charge after that
Or a charger problem that killed the power circuit in both laptops
Because the correlation is odd. It would seem unlikely that there is no causation link
Sounds like its time to break out the iFixit kit and do some probing tbh
Yeah right
something surged or whatever
They're both using different chargers too
then the problem might be before the chargers
And have home surge prot and the power strip surge prot
how old is that power strip
Just a quick question, when plugging in the chargers, did you smell the magic smoke?
unplug the power strip, unscrew it and see if the MOV's inside it are expired
And opened them up nothing obviously fried
by expired I mean bulging and burnt up
Then yeah, its probably something outside of the laptop
Which would be impressive tbh, you have to try pretty hard.
Old surge protectors with damaged MOVs
sometimes I forget Discord is on the AI game too
does the 5 dollar fp supporter thing support 1440p streaming? or do u need supporter plus for that
Wait, Discord has AI now?
no, your messages are sold to be data farmed
Over time they start to look like this. Maybe not as bad but they crack from taking so many surges
Good to know
.... If your power is garbage
to whoever reacted to my msg, what is the qwuestion abtout
They are in the power strip usually across every piece
Lighting Strikes in the area charging the lines in your walls can cause this.
thats what happened to my pool controller
My surge counter caught it on one side of the circut but not the other
which told me it came externally
Yeah, but that's extremely either uncommon or area specific
That's somehow worse
idk ive cracked open quite a few yellowed up surge protectors that have had cracking movs
Yeah but I think part of that is just simply age
even the turning on and off of things slams them
If your powerboard/surge protector has yellowed, maybe time to get a new one
Also the standard for wiring in the US is horrific.
This is what happens when MOVs begin to die. you see that spike
that will destroy things
the mov acts as a shunt
This all said, none of that should make it through a switched mode power supply
this is the part that gets me
I can explain up to this point but not how it fudged a power supply like that
I have no doubt that it did though
Inb4 he also coincidentally poured salt water on them both
Occams razor suggests unreliable narrator and/or information that is not known
I have a bunch of these, I wish it was in code to attach them to the side of gang boxes and have them wired up
They are only meant for things like alarm systems
lmao i love modding this game
so brutal when the LTT vids got the dead camera sensor pixels on em lol
you know I bet it is within code... I need to check
no its not, it would be inaccesible
Ofc someone makes one of these.... time to add it to my alarm
show?
I highly doubt it's dead pixels but rather either A) Dust on the sensor or B) hot pixel from pushing iso
What vid, I can pass it onto camera team and find out more
Oh this is an old one and has been solved
And no one's going to save you from the beast about to strike
https://youtu.be/DNfj2BxGIxA?t=300 top left of the screen
F
Back to Paint 2D
been solved
ah the incest sticks have been solved good to know
I thought you were talking about the board Elijah fried
This is actually going to be odd to wire up 😐
I just realized this is for 38VDC/30VAC
Is resin 3d printing mainly for like models and stuff? Or is it strong enough to be used to replace production parts? Like gears or rockers for electrical switches or just stuff you’d actually use
you'd need a UV protective coat and even then it appears that ABS and ASA just do the job bettter
which holy fuck what a time to ask
Q1 Pro is only $350 USD
mhm, it's a very solid deal rn
Would anyone please be able to help me in my thread? Please and thank you.
https://discordapp.com/channels/375436620578684930/1310441540602171463/1310441540602171463
You'd want ASA not ABS, but yes ASA would probably be better than reesin. However generally 3d printed parts are much weaker than injection molded parts so working as a replacement can be iffy
imagine ASA if that patent troll didn't get approved
Yea only issue with a standard 3d printer is some of the parts I would be making I feel the layers would be a weak point and also most of it would be tiny tiny. For reference I was looking at resin 3d printers with a 14k resolution just to hope to get the tolerances
Honestly ideally I’d like a Makera carvera but just throwing $5k out there on something is a tough pill to swallow
Yea that is true, but some stuff would have to hold a vacuum, others would need need to hold a +/- 0.005” most would need to at least hold a 0.01” tolerance
I'm going to be honest, you are probably better off just buying a part for that, at best you DIY injection mold it
There was actually a kickstarter edition micromolder on marketplace the other day for like 2k, and the production one on their website is about $12k or something like that
Almost snagged it up but then I’d need to get the molds made and I’d be back to square 1
Boco bola
I do have a "new" filament that would be interesting to see in terms of strength, but would probably be hard to get the dimensional accuracy
Some of the parts I’d like to make, the gears would obviously have to be metal hence me wanting a cnc mill
Yeah you won't get those teeth at a good strength with 3d printing
It the housing I’ve thought about making out of plastic
Only issue is the o-ring groove on the top measures out at .01” thick
That's fine with some fine tuning
Manufacturer charges $2000 for one of those side plates
Yea I’ve been trying to get around to modeling one. I’ll be the first to admit I’m pretty novice when it comes to modeling software so I’ve thought about just having an actual CNC shop model it and paying them to do it
Yeah you'd probably be better off with a 3d scanner or paying a pro locally to do it
But yea, either 3d printed. Or CNC machined out I could make my own, then sell them to the company to make a nice profit and it would still be way less than $2000
Let me show you the LED boards they charge $250 for 💀 you’ll get a kick out of this
How much stress is put on the casing?
Not much, it holds a tiny camera module that just pans up and down, hence the gears
They could probably get this made for like $5/e or less if they did a large amount
Yea I already have a full quote for manufacturing and assembly, $200 for 20 boards on PCBway
Sell them to the company for $100 a board call it a day
They save money, I make money. Everybody happy
My whole "business" is basically finding a company that needs something, 3d print it, sell it like 5x cheaper than other alternatives
I was initially surprised how much they are paying for things, I've gotten used to it now though
actually?
Yea that’s kinda what I wanna start doing with where I work. Just sucks because a lot of the stuff more or less needs to be aluminum, and what isn’t aluminum is already being 3d printed on site for the most part
MHM, started off with a recomendation from my dad, now I've got a solid amount of people that purchase things from me
For context it needs to be aluminum because it goes in gross nasty corrosive sewer water and such
Let me introduce you to this interesting filament called Tullomer 
thats neat. never thought about that
I will say, 100% would not have been possible without my dads recommendation
where do you do this?
Local companies in North Carolina (US), mostly labs/pharmaceutical companies atm
nice! surprising labs dont have their own 3d printers to me kinda
Could someone have a look at my support thread in tech support? #1310444372818399242 message
See... I convinced my moms work they needed one... now I use theres for some fun prints cause they have a much better one than I could ever get lol
https://youtu.be/g6HYrNzOqTY 10 secs in
De-google your inbox for only $1 with Proton Unlimited! http://proton.me/linustechtips
What do you do after you sell your entire collection but still want to game? Use the money to build the ULTIMATE GAMING ROOM! Part Gamer Cave, Part Scifi Nerd Dream, Part Nightmare Project - watch Linus and David finish turning a garage into the most excellen...
Felt that, I have access to some pretty kick ass ones through my work or another company we work with. And at my work we have a manual lathe and mill so I’ve done side projects with those for some cash
damn you're not going to link it with a timestamp
It's nice to have access to a good high temp printer, cause my printers def aren't getting to 600c hotend, 200c bed, and 180c chamber
I’ve been trying to convince my work we need a tormach cnc mill to bring a lot of the parts manufacturing in house and it’ll save money but spending $40k on something like that is a bit hard to do for them
That's my work rn (nothing to do with manufacturing/this convo)
They'll spend 15-20k a year patching something but won't spend 100k one year to just make it a non-issue ever again for atleast 20 years
Though I did get told we are next in line for a renovation
Yep, I know the issue all too well. Literally every single day I place an order on McMaster Carr for $100 minimum. Or I’ll replace parts that are $5000 and they don’t blink an eye. But the second I bring up that we could spend $40k one time and have the machine pay for itself in 6 months by manufacturing some of those $5000 parts we use everybody closes up their wallets
My main problem is just local government bureaucracy
https://youtu.be/g6HYrNzOqTY?t=213 another one (3:34)
De-google your inbox for only $1 with Proton Unlimited! http://proton.me/linustechtips
What do you do after you sell your entire collection but still want to game? Use the money to build the ULTIMATE GAMING ROOM! Part Gamer Cave, Part Scifi Nerd Dream, Part Nightmare Project - watch Linus and David finish turning a garage into the most excellen...
idk
im tired eepy okk im hiding now
How in the world are you seeing these lol
vizio tv
my screen is dirty enough, i probably just subconsciously assumed it was a piece of dust on my screen 😄
hi
nope
did it in bios
yo yo, pops up a few times, most noticable when the editor crops in. average viewer wouldn't notice but I have spidey sense for watching out for that with my own work lol
just needs pixel mapping if it's a sony FX camera, mine does it when sensor gets hot after long shoot and I'm at a higher ISO than normal
If I enable the clips feature in the nvidia app, is it constantly writing to my SSD? I assumed that it stores the last 5-10 mins in RAM and only writes them to disk when I press the clip hotkey. Is that not the case?
Also is it similar for Steam's new clipping feature?
How much would you expect this to sell for used?
Dell PowerEdge R710 Server
Includes:
Dual Intel Xeon X5650 (24 cores total)
128gb Ram
6x 1TB HDD’s
12 Gigabit NICs
Dual redundant hot-swappable power supplies
iDrac port
Cable management arm
Faceplate
Rack Rails
$50+ shipping
Really? I feel like that is pretty cheap for 128gb ram even if it is ddr3
And a 6drives
HDD are quite cheap
It's just a waste of energy
you can try and sell the ram separately
or get a DDR3 capable X99 and sell it as a system with a E5-2696V3

hello?
Hi?
wild
the x5650 is 6 cores so 12 cores total 24 threads* in the phot above is a single xeon vs a chad 4 core 8 thread i3 12100f
how much trouble could a game get into if they used the goodyear and continetal tire brands logo and campbells soup logos in their game witout permission with a few others wich are also in question
Wild
Or just... Not?
LMAO a modern i3 is heaps faster
and the i3 12100f is like 3 generations old now
hi
is it worth spending an extra 120 usd for a 4060 TUF A14 over the 4050?
How to link floatplane to LTT store
I have a GPU that requires an 8-pin power connection. My cables are a 6+2 config, does it matter how I connect it? Like does the 2 pin have to be in a particular place?
Why?
they only fit in one direction
just look at the latch and the key'ing
i love twitter idiots
he's only half wrong
Bf early access
The waste heat and sound that ICE makes is why it's so inefficient compared to electric
The radiator is a condenser for air conditioning
I just figured it out before I was just a blind ass mofo
Lol happens to me all the time
Good morning
Good thing Twitter is dead and x is dying
yeah and battiers dont get hot or cold so no need for rads 
yeah nothing in a tesla needs cooling
Heyloo
thats the point i was making
Ur pfp looks like an ecosystem ✨️
It is 😄 it runs on RGB
I doubt anything would launch without it tbh. I'd be staring at it like a fly omw to the zapper.
PCIE power cables are mostly like that, just put them together.
The brakes are also cooled, just not watercooled
So is power steering
The computer would also be cooled, just not watercooled
Almost like thermodynamics is a thing
tesla also warms the batteries in the cooling system afaik
So r y'all Americans here r there any Canadians?
Canada doesn't exist.
.... There are dozens of people not in north America
Key word dozens
Lmao
Sry to break it u, but we exist. & We do ride moose to school.
You've been brainwashed by big maple trying to sell more maple syrup
Snet example in #tech-chat-1
Maybe ur onto smth ngl
Minimalism is just something made up by Big Small™ to sell more less
OK that flew past me, what?
Big Small™️ wants to sell you less in the name of minimalism.
Maximalism is just something made up by Big Big™ to sell more more
Minimalism is actually bullshit flexing by rich people. The only people who can afford to have less is people who can afford more.
real
Biggie small died the 9 mars of 1997 
When it's trashy for the poor, it's classy for the rich
i’m going to India and I’m afraid the bar is not gonna be as clean as it is in America, anyone have any cheap solution to help me power, my laptop and other things maybe, the main thing I’m worried about is power surgeing because I know my things can handle the voltage change
maybe something like a travel adaptor with a built-in surge protector
https://www.amazon.com/Philips-2-Outlet-Protector-SPP2111WA-37/dp/B0B5VV1GW7 oh they seem to be a real thing
Your power does more with the Philips 2-Outlet, 2-USB Travel Surge Protector. The ultra-convenient compact design of the surge protector includes a grounded outlet on the front and back of the device. Additionally, there is one USB-A port and one USB-C port on the front of the device that has 3.4...
Cheap solution is come to Canada instead of flying to india. The US dollar is worth like 1.4 CAD
he is in canada
Canada is in North America.
I thought they meant the United States of America and not the continent though as people usually shorten it down.
i refer to American because some of the american minds can’t comprehend another country in NA
damn they get cheap
Minimalism: I don't need a kitchen because I order in all my meals, I don't need a car because I get driven everywhere, I don't need spare parts because I have other people fix it/get new stuff
yea but was looking for something like this (minus the USB ports) with a surge protector built in i can do some simple research but was curious if there was a well known solution
If you're powering a switched mode power supply into a laptop it really doesn't matter that much
Also if you use USB C for all the things it makes it trivial to have multiple chargers, easy to have an extra battery, and easy to replace.
It's a total cheat code.
true i have USB PD 100W on my laptop
lol same I replaced the original charger that came with my mac to the ugreen uno 100w one recently also.
Albeit I still carry around the first part charger for those random needs if I need it.
Wait there are countries other than the united states of america?????!!???
There you go. Grab a 100W PD battery bank, a multi output gan charger (however much you need) and a bunch of C to C cables.
My laptop, keyboard, mouse, external monitor, battery bank, is all USB C
I often just use my laptop as a massive power bank
lol, i’m not replacing my original because I have a Asus M16 (4070 + 13900H) which eats power like nothing
Cute👀
Kek, my personal laptop is an XPS13
yea i’ll check that out i have a gan brick and cables from ugreen already
oh yea I get you when I had my xps 15 it would bicker if I had anything under 130w regardless.
lol, yea they eat power up
They said they were in America and I assumed the country rather than the continent ofc
... No it doesn't. It has a 45W charger
i thought it was the XPS with the gpu…
My phone has a 30w charger tho, 45 is not a lot of power.
just the 15 and up
XPS13 is 13" and is ultralight
well now there is no more xps15 haha
oh nvm, my b
Wait what
Dell replaced it with the xps 16s now
with the new redesign of the keyboard and haptic trackpad
Very much doing an Apple
curse the touchbar type f row
trackpad wise it has my stamp of approval.
minus the weak haptic feedback imo.
I’ve been considering getting one of those since I got the iPhone 16 pro i could use that to charge my phone and my steam deck all with one charger which would be nice
Funny enough you cant actually surge protect these things
When you pick MOV's for a surge protector, you know what your target voltage is and your breakdown (protect @) voltage.
Lets say I used a 150V MOV with a 240V breakdown because I need to be tight on protecting whatever equipment.
I plug that thing into a 240V outlet across the world and suddenly that MOV thinks its a surge
additionally, if I used a 150V MOV with a 500V breakdown, a 240V load will overload it
If I used a 240V MOV with 500V breakdown, it wouldnt sufficiently protect 120V loads
Because it doesnt breakdown fast enough

i refuse to do software dev on windows