#public-chat
1 messages · Page 1270 of 1
so... you want to be turned into a ritual?
yes

Id just want to be gone and not deal with life anymore
sup
Per
lol
I got like 400 views on my second video, YouTooz when
ew supporting a company that still works in russia
hi
Ok?
Was playing star citizen and decided to overclock my ram.
probably the most satisfying overclock ever. i went from 30FPS or so to 90. Going from 3200mhz to 3533mhz
Nah put me in epoxy resin I’ll outlast everything
then your circuit is wrong, you need a pair of resistors added to it,
oh, okay
i thought the mosfet did the job
it does part of it, you need the resistor to control the current and voltage drop itself
this is the circuit you're doing for it
https://www.homemade-circuits.com/lm317-lm338-lm396-calculator-software/ for calculating what resistors you'd want
My internet is back after 30 hours
for example @pure knoll
oh okay thanks
i will adjust
im not very good at making circuits lol
depending on what kind of circuit you want to do, there are examples out there you can use and adapt to what you'd want to do
what's this for?
Just designing random stuff in kicad
Ok
fair enough
the circuit looked similar to a simple battery level tester
What on earth is going on here
Did you stability test it
Did you touch timings or voltage at all
Idk
Kinda just messing Round with an led array hooked to a ne555p
You've connected the first and last LEDs in parallel but have the middle connected in series with the first one?
It's supposed to be like a loop
I should probably take some more tutorials on PCB design to get a bit better
What does the schematic look like?
Hold up I'm eating lemme head upstairs

One sec it's just a route to the middle
Also
Work on cleaning up the schematic a bunch, it helps when making PCBs to have a clear schematic to look at
Yeah, I was just following a diagram without really understanding what it's about
It's not that it's complicated they just routed it horribly
Another also, each LED being hooked up in series like that with resistors to ground after each one, that essentially forms a voltage divider so each subsequent LED in series will be dimmer
Do not be afraid to place multiple grounds on the circuit so you don't have to do really long connections
so do i just split the ground source into multiple ones?
heres the website im copying off btw
https://circuitdigest.com/electronic-circuits/led-on-and-off-circuit-using-555-timer-ic-and-bc557-transistor
Oh I hate their schematic but it works lol
i see it's using a simple voltage divider from the discharge to threshold, you know how much voltage it will be?
You can if you'd like to clean up the schematic a bunch
I thought it was a 12v in
that's the main power, the simple voltage divider part goilng from dishcarge out to threshold is setting it to a lower voltage
for example if this was 10k on the top and 20k on the bottom and i was to run 5v into it at the top, then i'd get around 3.3-3.4v where it's in the middle
it's determining the voltage output when triggering to be at a lower voltage
Ah so it takes in large input and resists it into a low one for the ic to use? I'll make sure to consider than when routing
for when it triggers to pulse it looks like it, so you don't short out the led's
Also why are there 2 vin prongs and 2 vout? Why not just resist one and split it into two
Ah okay
I need to go back and actually read a bit more about what the circuit is doing haha before I start drawing it up
it's showing it as voltage in to voltage out, the lower side is normally the ground
Why do you need to resist ground? I thought it just ran with any tolerance for voltage back? Or are there also requirements for ground?
It's not 'resisting' anything
Would advise looking up what a voltage divider is to understand it better
Will do
... doing things without understanding is a terrible idea.
i am attempting to broaden my understanding by listening to these wise gentlemen
its not like its a production pcb anyways
13:37!
for anyone thats done an apple pre-order before, whats the earliest apple stores open for pre-order stuff? like usually mine opens at 10-11am but i got an 8:45 preorder
Bruhhh
Blud is preordering the iphone 16 lmao
people have already preordered the 16
bro thinks hes him
nayone know of any cases like the Cryorig Taku Case - The PC Monitor Stand that linus did a video on? i really want somthing like that for my media pc to go on the Home theature stand.
might have to build one. casue iv sreached for hours on google and cna t find one haha
eh might have to hit up Protocase and see if they can make me one
Hi everyone
Hi human
bogos binted 👽
🤯
dark viper
Hi
Linkin Park finally has something I like
does anyone know which apple watches have AOD? info seems a bit spotty
Is white titanium for iphone good?
hello guys
Yo
As opposed to what?
Natural
Hi
Series 5+ and Ultra
All SE models excluded
gotcha thanks!
so as long as it isnt SE and more than 4
As of 2025: supported non-SE models
(Well, my series 5 had a short support lifespan of ~5 years)
Meanwhile the SE1 lasted 4 and S4 lasted 6
What gives, Apple?
but what does it mean when it expires? just no more new features? or does it stop working ?
Do you remember Windows 8.1?
yeah
I can still technically use it
though shit stops working sometimes
so like that?
Software support is getting lesser and your hardware is getting less powerful
I have a broken dedicated GPU in my laptop. Is there a way to turn it off forever?
So, I was wondering, I'm from Belgium (in Europe) and if i were to catch a flight to Canada, what are my odds at getting a visit to the LMG office?
Low
They don't let random ppl in
When I was in a vc with Elijah, he said they have ppl all the time try this and they try to make them leave
I understand that, but I was hoping to get a pass because I would've came a long way 🙂
That's not how that works
fair enough
You will need to wait for an event to do it
One day ... another one for the bucket list.
I don’t think so honestly it would be better to get your laptop repaired
What kind of laptop is it BTW?
Lenovo Legion i5, can't remember exact model
That is a great laptop
I would recommend calling Lenovo and have a technician repair your laptop they do have the best customer service overall
You can get that kind of thing repaired?
Yes you can
I no longer have warranty either
Oh
You can also try getting it repaired at Micro Center as well they do have people that can fix computers
I'm pretty sure it's only fixable by replacing the soldered GPU since there's pink dots all over my screen
I'm in Canada as well so less repair options and no Micro Center
If it’s soldered than the motherboard needs to be replaced
Yea, I just want to disable the iGPU. Is there a way?
Makes sense so you’re limited in Canada
I'm not planning to game or do anything intensive on this device. I'm not sure if it can run on just the CPU. No idea about graphic capabilities
There should be a way to turn it off you would have to check in Lenovo Advantage
Do you game?
Nope
Then it would be better for you save up money for a laptop that you can do productive things I would recommend the MacBook Pro since Apple makes really good computers and they’re capable for heavy workloads like video production or programming
I already do have other devices. I'm just trying to get this specific one to work
Alright I would say do research and check to see if you can disable the iGPU
Fair enough, tyvm
No problem
heyy so idk where to put this but does anyone knows the plex server? im kinda struggeling rn and dunno how to fix it
?
? do u know plex and wanna know what the prob is?
thats not how you ask for help
you put your question into chat, and anyone who knows, MAY answer the question...
im not even sure if tthis is the right server
but thx u ill try
???
plex have their own discord, and subreddit too
can u link it pls? i didnt find it?..
you typed more words asking me to do it for you, than you would have had to type if you typed "plex discord" into google
lmao no did this before
isnt my first language
What in Pete Sampras is going on in here
im looking for the plex server but im not able to find it TT
like fr whenever i google it there are no result s which are fitting
Its right here https://www.plex.tv/media-server-downloads
ah my mistake! but thank u anyways i do ve the plex server im looking for a disc server for plex.. cuz im struggeling with plex rn and am looking for help
What are you struggling with?
so i set up a Server and i can perfectly access it with the app or the Website but now i wanna upload Pictures on my devices and not the Server...this doesnt work at all, i cant even Access my explorer.. all what shows up is the explorer from the Server and not from the device
Ah ok, yeah I'm not going to touch that one. Thats not something I've ever tried lol
lmao okay but thank u anyways!!
@umbral wadi are you on the same network?
tried both
yes and not -but both doesnt work
Is there anything that could be blocking Plex from sending outbound? Firewall or smth?
Do you have a pic of your Plex server file config?
oh but i made access through other networks possible
and yeah i can access but not upload anything
What do you mean you can't upload anything?
yeah pls gimme a moment
Are you trying to upload from the personal device? @umbral wadi
Like the one not hosting the files?
like i want to upload more files (for example a foto) and i already upload one but this one i upload on the server-device. when i access the server with my laptop through the website i can see the foto i already uploaded but arent able to upload anything new
or can i upload things on the server only? and i am only able to have a look at them with my other devices?
Server only I believe
That's what I was trying to figure out by what you were saying.
ohh okay this would make sense
but i had the same thought
It's server only
@umbral wadi but that's just what's built in, since Plex just replicates the folders on your hosting device you could come up with some sort of retrofitted file sharing.
You'd have to connect to the actual server filesystem itself and upload that way
ahhh
okay okay than fist thank u to u both!!
that actually answered my question completly
thanks!
You might be able to work it out to where you can use one drive and sync the folder that Plex is connected to. @umbral wadi
Or Google drive as well. These are probably the easiest options.
yeah ill just try some other things out but now im sure that the way i planned it is not working..so i can try new things out!
Alright 👍
sup
anyone know of an existing eink phone with 5g support?
three requirements, eink, camera, and 5g
seems to be impossible to find
basically all I need is a phone with functioning android auto and a camera so I can use 2fa
Display: E INK Carta HD Screen Size: 6.7 Resolution: 900×1800 PPI: 300 WACOM Active Digitizer: No Front Light – Yes Color Temperature – No Processor:Unisoc Tiger T7510 RAM:6GB Internal Storage:128GB Physical Page Turn Buttons: No Micro SD: No WIFI: Yes Cellular: 5G Operating System: Android 10 Battery:4770 mAh Digital
I'll be honest I saw the A9 and my monkey brain assumed that was the new one
thanks coop
Today I had a customer come through at work that looked like a oblivion creation off youtube
Didn't know a person could look that weird
Is a router the best server choice for WireGuard ?
Horrible I have work in 30 mins
tech fail! point and laugh at this man!
I have a question, can a USB-C port charger even be sold at 12v 3a ?
Not PD
always at that power
Cause I just fried a device by pluging it in
It let of the "magical smoke"
I was smart enough to plug it in to a device that didn't work correctly already, because it looked sketchy, and I just wanted to see if it charged, but apparently you can just have straight 12v 3a usb ?
Kind of ridiculous tbh
Is this shit even legal ?
Technically yes
Honestly if you want a good charger I would rather get the official ones like I would buy the official charger for my iPhone at Apple since it works well and doesn’t fry the phone
Nah, that is just devious
you can't sell it but you can certainly put a usb port on anything
There’s Anker too
Yeah IK, I was just testing it, I myself have a Ugreen 100W
overpriced
not really
with the exception of Chinese brands that do their own charging standards like Xiaomi or Oneplus
Luckily the new iPhones from Apple have USB-C so you can use other cables and chargers
the charging standards are well, standardized
Oh I see
Excpept when they aren't
I had to buy a new charger for my dad especially that it’s his birthday and I end up paying $40 for the charger at Apple
and then magical smoke 
Show a picture of the 12v thing?
It might explain why it doesn't charge, but aparently it worked for a while
I just don't think this is the original one
that type C port was soldered on after the fact
But if it's dead the fault is from the store who did this shit
I can guarantee that wall wart came with a barrel plug
what in the god damn am I looking at
let me take of the tape and see the model and search
someone who soldered on a USB C port just to use as a reversible port in replacement of a barrel plug
that looks like a normal PD charger
It seems that it worked for a while
and then it died (doesn't charge was the issue)
so what they figured out was the device it charges uses 12v PD
so they decided to take a 12v wall wart which is plentiful and solder a type C connector onto it
the PD controller hated it but it worked
Well, it probably fried the port then, cause it's set to charge on my ugreen and nothing
until it didn't
I have one too, it gets really hot and then de-rates itself down to 65w after like half an hour
then the PD controller probably died because it couldn't communicate to turn down the voltage
oh, mine does the same, it's the bigger one
The poor thing gets so hot it's starts to stop charging and back
this on the legion 5
100W is like barely enough to get some work done
But it works for word and stuff so yeah
I just want one of these guys to release a god damned 240 watt charger
12v isn't a required part of PD compliance, only 5,9,15, and 20v
Ello
Yeah but my ugreen has 12V
The highest I've seen is 180w from framework
correction, I want one that does multiple ports and has a dedicated 180w port
Sadly lenovo decided to do 140W type c but is not PD it's proprietery so the most I can get is 100W out of a normal charger
140W is at 20V 7A
which is not a standard
at least it works with 20V 5A
Are the 5v pins on a type c reversible ?
like do they stay in the same place ?
or does the device detect and flip acordingly the conections ?
240w is possible through 1 USB c port, no one has a commercial product available though
I just want to have usb c charging my 3080 laptop
Now I'm even more scared
This is not soldered, WUT ?!?!?!?!?
Thank god it's not available
maybe just something died, never heard of insys, they a house brand of some sort?
nope
or a clevo rebadger
just rebranded stuff
Like the worst laptops known to mankind
And of course the schools decided those are the ones students should get
Did you go to LTX?
looking at the video again, this looks like one my work also sold at one point, really terrible clevo model
I think I rode to BC with you and another guy
sounds familiar? my memory of LTX is a blur
254
mark rosewater?
Dell does too no?
yes my child, I am the lead designer of mtg
We met at a house in southern Washington I think
From what I understand the normal charger is 20V (rectangle one lenovo uses for almost everything) , so it's easier for them to do that way instead of having more circutry to bring the voltage down
That would be me
I think I grabbed someone else's whale lan shirt I wear XL and the one I have is Large, never figured out who's it was
If you ever want to get hideously technical, this guy does really scientific reviews of USB chargers, he's basically the project farm of USB chargers
Baseus 240W Charger with DC Port Reviewed and Tested
Subscribe to the channel: https://www.youtube.com/channel/UCNt-VKnOf-6-vVYqdiI_K8g?sub_confirmation=1
Support this channel via Patreon: https://www.patreon.com/allthingsoneplace
Baseus made a 240W adapter, it has some unique features.
Paid affiliate links to help the channel I earn a ...
Prediction (It can't)
I actually bought the Short circuit hoodie because of one of the guys at the condo
I actually want to go to LTX
I hope I can do it next year
Can an extender kill an psu???
A wifi extender?
I think so it would be best to be careful
Or an extension cord
yes
Use a thick one rated to work with as much power as your PSU does if you do, but not recommended
26 minutes, not amazed
My fucking psu is dead
they lied
They gave me 850 w only when there were like parts that needed over 750 w
Other things could kill it. Bad capacitor, overdraw, short circuit..
What parts need more than 850w
Unless you have a 14900K unlocked PL1 & PL2 & a 4090, I doubt you have anything that uses more than 850W (consumer wise)
there was my gpu that souces say, needed 750 w
Yeah no lmao.
Drop the specs
Unless you are running on HEDT (enterprise hardware) but even then do they get that powerful?
AMD RYZEN 9 7900
16GB RX 7900GRE
32GB RAM DDR5
2TB NVMe SSD
MSI PRO B650-S WIFI
850W Corsair RM850e 80+Gold ATX 3.0 - PCIE 5
No shot, you not drawing over 600W
Yeah nah
THEN HOW DID MY PSU DIE
Thats like 750w peak
1º Bad quality
What is your PSU
What is your PSU, that first
AFTER I SENT IT TO THEM WHAT THE HELL
Ahh, I wasn't here
The same message as all the other specs..
its new

That means nothing. A new gigabyte PSU in 2022 would explode (specific models)
Do you have another PC to test that PSU ? Or other PSU to test ?
If its brand new, RMA it. Idk what to tell you
What are the symptoms ?
we testet an old psu on the new one and it worked
Wait, first of all, what are the symptoms, like it turns of under load ?
This is HIGHLY unlikely
Just sounds like you got a DOA part. It happens.
Couldnt start no matter what. We sent it to them and they said it worked, but back here it didnt
DOA???
You try another wall outlet? Other breaker?
Does the PSU fan spin at all ? (If it has some kind of hybrid mode button, turn it off)
Dead on arrival
It started once and crashed, but the second time i couldnt start
That can happen yeah
That, I dont remember
so it couldnt have be DOA
The computer doesn't turn on any more ?
At all ?
We tested an old PSU and were able to turn it on
Try shorting the PSU TURN ON pin and the GND and see if it spins at all the fan and turns on (outside of the case unplugged of everything)
Or if it died totally
Regardless, try to RMA. After trying other outlets on separate breakers.
?? Dont tell them to do that lmao
RMA?
Why, if you do it correctly it should work ?
I've done it
look sources say gpu needs 750 w
Dude doesnt know the wattage of his parts, they could die
That rating is already counting with a CPU
What are you saying ?
Why?
try at least turning on the PSU outside of the case, just search on youtube (if you feel confortable, that or just RMA it again)
Yeah try other plug
Make sure its not your house power being too dirty to work
I've seen similar issues and it worked on other plug
Go figure
we tested an old psu and it worked
Just test it, it takes almost no effort
Spikes to up to 412w, and thats not gonna happen usually
I knew you would send that, but there are still sources that say otherwise
Like what, userbenchmark? What are your sources?
Also all this wouldnt explain the crashes
Many things could cause crashes
I like mine
Dirty wall power could. And you didnt mention crashes aside from that first one you couldnt recover from
Absolutely, I have a 3900x and 3090 running absolutely fine on a 650w PSU
Meanwhile me on a 5900X (UV and Eco mode) and a RX 6600 with a GX 850 Gold 
Should I just resend the whole thing?
5800X, 6700, RM850 
Still the 6700 can draw up to 180W ? (depending on model) I don't draw over 200W at all 
Hi
Thats what Im trying to tell you yeah. Unless you bought that PSU separately
But why the whole thing and not replace the psu???
5700X3D
Did you buy the entire PC as a unit?
Reason?
W pfp
Better performance and power usage
hi
Yes, but this whole situation is pretty weird. It doesnt work for me, but at their workshop it works. WHY
5700X3D by a long shot
Significantly better performance in games
Well, across the board
Good for VR?
57000X3D is better than a 10900K - 11900K maby even better, so for sure even better than a 9900K (not even speaking about power here)
9th gen was like.. 2017 lmao
Yes
2018
Any chance you have an osscilliscope to check and see the waveform of your power?
I highly doubt it
More like 2019 but okay
If he had, we wouldn't be asking help here
Fuck if I know, its OLD
2017 was like 7700K
and 80Ti
5700x3d can compete with modern CPUs in games
5700x3d and it's not even close
Power is not even a problem. We like changed the psu and it worked, but because its an old one, we decided to only power the motherboard
On a 5800X which is technically worse for gaming and its been fantastic.
Try to power only the motherboard with the corsair psu as well then
Wait, so you telling me you didn't power the GPU with that PSU ?
I have a i9 currently but was thinking must i stay or upgrade to amd becouse
I am struggling lately
I have i9900k
3070
16 ddr 4 2666
And keep struggling with vr and games
I was told that my i9 is not allowing my full gpu usage
Its not, the RAM doesnt help either really
Stockholm syndrome
no it was for testing only, to make sure that its the psu thats causing the problem
This is a long shot, but your GPU could be frying PSU's
I can't imagine the 8gb vram gpu is great for vr
Its.. ok. Its not great. I ran on a 1660 before and it wasnt the best.
I had better performance with my 1660 super 6 gig than my 8 gig for some odd reason
1660 super 3 gig ? thats new
Even my base 1660 was 6gb
@strange elk Bro please be my saviour
RMA.
Sorry 6gb
welp ive cut my desk
Typo
RMA the whole thing
why not replace the psu???
Ikea cardboard desk?
You can but youd be spending more money.
The thing with vram amount is it doesn't matter at all until it matters A LOT
You might have other thing frying your PSU's thats why.
Just let them have the whole thing, easier and less trouble, they can just test it as a unit and send it working
Nobody touches anything more
Tell them to do it, its free
And they can find other stuff anyway if there are more issues
I have like my data there still. Should I be worried?
Nah
Ok so amd 5700x3d it is then any recommendation for a decent mbo for it?
Ah yeah, they would wipe it
Could clone the drive, or ask them to give it to you before repairs, but idk
Any cheap B550
i got the tomahawk max wifi from msi it is nice
ROG B550-A Strix, but i'm biased since I have one, mine was quite cheap tho (110€)
B550 oke wam support 3200 ?
I have the MSI B550-A Pro. Hasnt failed me, but like Coop said, most B550 boards are fine
wouldnt they just replace the psu for free?
3200 is fine, X3D doesn't need as fast of memory anyway
Ok thank u @strange elk @ivory pond
I would personally go am5 R5 7600 32gb ddr5 6000mhz cl30 and a b650 mbo
It will be more expensive
I would think so yeah. Unless they want to do their own diagnostics as well. Idk who you got it from or what their policies are (nor will I research that for you).
https://pcpartpicker.com/products/motherboard/#s=33&c=145&sort=price&f=2
Any of these is probably fine
Choose A Motherboard
B550 and DDR4 is cheaper than the counterparts
He didn't state a budget tho
So who knows
In my currency uts double the price than rhe 5700 setup if i have to go 7600 ddr5
AM5 is meh anyway rn, always has been
5700X3D is still faster than a 7600 if i'm not mistaken
What country?
If I was to upgrade, I'd probably just upgrade to a 5800x3d or 5950x because I have 64 gigs of ddr4 already
They did. I'll still ask. Thank you so much. You too @ivory pond
Gl
For example its 550$ for the 5700x3d and $790 for the 7600kit
What about the misterous 5900XT 16 core that nobody even knows of 
i should sell 2 ram sticks. i realy dont need 128GB of ram
Includes ram and mbo and cooler on both
What motherboards tho ?
South Africa
Unless you want the upgrade path, personally I think 5800x3d is just fine and will be for years to come I expect.
Uhhm let me check
Ok, I got a question, how old is your current computer if you have one
Their specs.
yeah, but I want to know for how long he kept it
Sure 7600 might have a upgrade path, but if he only swaps computers every 4 - 5 years who cares
fair
Bought it in 2019
I9 9900k
H310
16 gig ddr4 2666
750psu
Ssd 512gb
Rtx3070
7600 does have a better upgrade path (depends on how much you skimped on the motherboard, but might be worth it)
Is your memory EXPO ?
Make sure it's EXPO and not XMP
Expo ?
Yes EXPO is the new "XMP" for AMD
before XMP would work just fine on AM4, but AM5 is more picky, a friend of mine got a XMP kit and dear god it wouldn't work at rated XMP, only XMP2 I think (which was slower)
All I know is I had to bump down the speed
Ohh oke ill check can i stop the link here of the specs?
You mean the memory they are looking at for the bundle?
yeah
ahh, it's a bundle ?
Hmm, throw here a link then
What they said (I feel like Ive mentioned older messages a lot..)
Releasing a new 16 core CPU that's almost the exact same as a 5950x but has the name of the 12 core CPU
#marketing
Don't forget that is more expensive than a 5950X, at least where I am 
What even…
For the 7600
Same,
5900xt is $349 and 5950x is $351 on Amazon
Memory and cooler isnt in my market so cant vouch for those, memory is a little on the slower side and Im not seeing timings here
Well, not where I'm from, here is just plain more expensive
Me when my marketing is for generational performance inherent with the generation of product
Can't you get it cheaper by parting it out ?
Meaning?
South Africa is .za?
Use something like pcpartpicker
For example, you don't need a water cooler, all you need is a decent aircooler for a 5700X3D
Yes
Its a free gift u get when buying it
Nothing is free, it's included in the price, thats what it is
Reason why liquid cooling i prefer is where i stay it gets up to 120 degrees F
Valid reason
I wonder if that actually matters though
It might, I would have to search a bit
I had a fan on my i9 was always overheating so i went liquid and it stopped and it was a big as cooler
But if it gets 70C under load (usualy tests are done at 21C) imagine at 48C it would be at 97C
Also space in my case is also an issue
But you can fit an water cooler on it ?
Just don't mount it on the bottom, because it won't survive for long
Or if you do flip the case 
Mine at the top heheh
I mean overhead space is something to consider with large tower coolers. With a water cooler you just need fan mount area with good enough clearence for your GPU if put in the front, and motherboard clearance on top.
Best position to mount an AIO, yes
@ivory pond sent u a dm space is limmited
Are you planning on selling your old stuff ?
On the other hand, liquid cooling is still air cooling with an extra step
and more failure points
If not you could just re use your cooler (if you go AM4 route, or even AM5 if your cooler doesn't come with a custom backplate (the clamp type) )
Yeah, but more surface area and thermal mass
Yes i am
The cooler i dont have the spare am4 socker stuff anymore i lost them during my move
Yep, unless you literally saw the top of your heat pipes off, an air cooler essentially can't fail
Thank tou 2 for rhe advice and help u 2 are super
If you are really tight on budget go AM4 route, if the difference isn't that big, go 7600 since it will give you a decent upgrade path (they commited up to 2027 so take that as you will), if that matters to you
hi everyone
or you over heat it, and the heat pipes run dry because theres too much heat for them to allow the fluid to re-condence
that x3d will last a long while though.
Yeah it will
is there someone here who has alot of experience in recovery of data ?
Depends on what you did/what happened
^
@golden oyster hi bro
I'll save you time
If you have an SSD and it has TRIM enabled, you can forget it
Dm
if theres stuff you have lost that you cant afford to lose, go and pay an expert, dont try and DIY it because you can make it worse
What was the drive ?
I can tell you how to recover partitions with testdisk if you accidentally deleted one but thats really about it.
long story maby someone can talk? in channel?
you still havnt said what the problem is
is it a HDD or SSD ?
hdd
nobody can help you if we dont know what we are trying to help with
Theres no VC here if thats what you are asking to do
the files are all with $in front of them
i recovered all but with $ sorry for my typing im dutch
go, to, a, professional
Yeah no one’s helping with my form post since it’s dead don’t know why I’m still here tbh
what do you mean a $ ?
file names
nobody here is obligated to help anyone, if you post something we can help with, and feel like helping with, we might do... but... feeling entitled to help, and commanding help from people, isnt going to get you anywhere
Dont see your name in the #1027757333117415424 channel
I think I know what happened, you recovered your files, but you don't have a journal, I doubt you will ever get those names back tho
$test1.doc $test2.doc
Is it a random naming ?
no just an example
No no I get that I was just saying after that died that idk why I’m still in the server
How did you lose them in the first place ?
Lets start there
If is not a random naming, can't you just remove $ from all files ?
long story short my uncle did not a great job with his NAS server no recycle bin but deleted a map full of information and 100's of files. now Im so far i got back the deleted files but the files are all named the way they did but with an $ in front of them
just use a software to rename them
I had one that did that, you could even do regex
Dont even know if the NAS runs windows
for all we know this could be the home folder in terminal
well, just ask chat gpt for a script then (test it elsewhere first tho, never trust AI scripts without testing)
honestly, with how many files there are, just leave it... the $ being at the start, wont change the sort order of the existing files
hey can someone help me fix my game i get 5o fps in minecraft with a good pc and the rest of my games dont havethis problem can anyone join avc w me if they can fix this?
There is no VC
i mean on a call
KRename for example, I dunno just search for bulk rename utilites
for respective OS
thanks for the tip powerrename
I use file renamer, or the cat command in a situation like this (linux)
i think i speak for everyone when i say... thats gonna be a "no"
just make sure to test only on some files first, because you can do more harm than good if you mess it up, and make it worse
how can u speak for everyone
post your settings in #tech-chat-1 or #1027757333117415424 with the problem you are having... someone may or may not try and give you an answer, but nobody is gonna jump on a call with you
Because they have been here a long time :>
im the oldest here, so that means im in charge 🙂
oh nice
because every single time someone requests for VC help they become just a nuisance
Settings, log file, what launcher, what mc version, all that good stuff
As much detail as possible
i genuinely need help
everyone else says that too
So did they
i really want to play minecraft
So did they
then play it at 50fps
how old are you?
15
lmao
hbu?
good, time to start learning on your own and not being spoonfed everything in life
tf u guys violating me for i only needed help with fixing a game
i joined a server called tech tips
you're not a child anymore you're a teen, perfect time to learn problem solving
We are telling you the process you need to go through to get help
you need to learn what "violating" means
tech tips isn't game tips issit
If you dont want to follow the process, we dont want to help
bro do u
...
we are being dicks, that doesnt mean we are violating you in any way... and, if you cant understand that, i would say you were closer to 12 than 15
"bro" xd
Actually it's 🍞 tips
Yeast tips
"xd" 🤓
couldnt you say you dont know how to fix my problem instead of telling me to find a way to fix it myself even though ive been trying for the past hour
we don't know your problem
is it wrong to asdk for help
We dont even know what the problem is to begin with lmfao
this my problem
Sure you are getting 50 FPS, but for all I know you are running bedrock on an android device
no, but you were trying to force us to VC with you, we said no, and you spat your dummy out about it... we told you how to get help, and you ignored us
I'll get you stated, drop the specs first of all, then drop the minecraft version (idealy F3 screenshot)
forced!!??
50fps could be perfectly normal for all we know
4060 ti 13600k specs
^yeah on RL Craft 
Could even be the max refresh of your monitor
what the sigma is this public chat drama going on?
1080 monitor
drop a F3 screenshot
Scroll up a little, itll make sense
We don't need more brainrot in this chat

btw this only happens in singleplayer
Thats the first thing that makes sense
You have some kind of mob farm ?
Because you are running the server and client on the same core
Show F3 screenshot to see how many entities you have and better view of specs
what is your render distance, what chunk settings have you got set?
32
...
minecraft version ? are you running mods ?
joining a server forces their settings, single player, forces yours
i did to 25 before still the same
4060ti ain't doing that
16
I only can run 32 using sodium lithum & phospor on a 5900X with decent framerate (with mods even worse)
32 chunks is HARD to run
nope
5 fps while stacionary ?
render distance, and simulation distance, on a stock client, 16, max
Especially for a single core
yes
not chunks then
You are not generating chunks
Once again, throw F3 screenshot, so I can help you
Or any sort of log ffs
tech chat
I dont think they can post images actually
imgur link I dunno
1
just testing your settings now on my 5950x and 6750xt... 32 render distance, 32 sim distance... im JUST getting 124fps...
if i start moving erraticly... that drops to 70
im stationary
on your setup, im surprised you are getting as high as 50
yes
Really?
Try fabric with sodium lithium and phospor
If you know how to
That seems decent enough but
Still weird tho
whats bad abt my setup?
with 32/32 on a stock client... on their cpu/gpu, 50 feels high
nothing, but mine is more powerful than yours, and im struggling to get decent performance on mine at those settings
I don't think so, but let me test then
Same
24 does genuinely seem too low, but like.. I also dont use Intel
Is it 32 sim distance as well ?
on servers, you get their settings enforced.. so even if you have 32 set locally.. if the server says 10, you get dragged down to 10
sim is 10
oh k
I only get like 40 flying
Press F3 + 2 and send a screenshot (and F3 + 1 as well pls )
move a bit before doing so
Gui scale I think
minecraft??? 😄
Well actually idk
yep, i play on it with my kids
Switching to 16 definitely helps a lot though
https://fabricmc.net/
https://modrinth.com/mod/sodium
https://modrinth.com/mod/lithium
https://modrinth.com/mod/phosphor (This one atually not needed 1.20 and above !) Mine basicly did the performance fix
https://modrinth.com/mod/nvidium
Here you go
Well one thing with minecraft, singleplayer will definitely be harder to run regardless. But try those mods
Use that and enjoy 200FPS + with 100 chunk view distance (this on a 1660 Super) i've tested
i have the periodic table inmy chem book what is this
They will work in vanilla servers as well
If you arent using it already, I recommend PrismLauncher
i use feather
never heard of that
feather client?
Oh I use PrismLauncher as well
Very good
Ah its a cheat client lmao
But you are fine by using those mods, they even allow them in speedruning

That might explain some bad performance, those usually have a bunch of calculations in the back 
Well, that really explains it
Not a red flag at all
That will kill some performance
That is for sure
It says its made to boost it but Im at least slightly skeptical. Prefer to do that stuff myself
I used Lunar client because I played on hypixel
and was a safe one
Showed like everything I needed
hypixel has data leaks alot of the time
Well yeah, and that is why you use multiple passwords
i only play on private servers with me and my friends 
What are you trying to show me?
Wait why was that automodded lmao
I would just use KronHud with fabric then
#Fabricontop tbh, so smooth
All those clients can give, you can just add individually
Be it hud displays, minimaps, remove effects
We have 5 modloaders now oh god
I only really know 2 tho
Fabric & Forge, the rest doesn't really have the same mod support (heck even fabric is lacking sometimes, especially older mods that sadly don't get updated)
Quilt is a fork of fabric (didnt work with the 4 fabric mods I just tried though so idk)
Liteloader has been around a long time but isnt very popular
NeoForge is new
i downloaded prism but its not running
Whats not running
when i try to setup files it doesnt run prism
You try the portable? Itll store all of your minecraft stuff in the same folder
Im on linux so I cant help too much on the windows side anymore
Did you ignore this?
alr thanks
Ubiquiti sucks
liteloader is effectively dead for newer versions as far as I know, and neoforge completely replaced lexforge (the original forge) after 1.20.1
so it's basically just quilt, fabric and neoforge
more so that all the other devs dipped and moved to neoforge
I'm pretty sure that it's literally only lex left on lexforge
Heard a lot of drama about that a couple years back, I kinda stopped playing back in 2020 though, been off and on sometimes
Bro just dropped this and left
What are you on about
I don't think Jake would agree tho 
Dudes got too many access points
Yapping to each other too much
I wouldn't personally buy ubiquity if only for the fact I want full control of my hardware and software
I call Ubiquity the Apple of networking
At least their software, does really remember apple, can't really tell what tho
They are expensive too so I mean I'd be inclined to agree
Yeah
Not really if you take in consideration is more for small business, and enterprise hardware is really expensive
Just check the price like on any cisco stuff
I'd imagine they have a more compatible ecosystem though but no clue
I mean when you put it that way sure
You are paying for the support as well, which isn't something I care much about if I have full access to the software
Yeah, I get what you mean.
My router is on OpenWRT, and I replaced my modem / router combo (was in bridge mode) with a thingy magicy that can emulate devices so the OLT thinks it's the original ONT
Openwrt is sick
Indeed it is, I have a cloudflare dns that works as a ddns due a openwrt package
Asuswrt was good but openwrt is so much more configurable, can do way more with it
that and my openvpn
It can do 100Mbit
which is quite a lot tbh from a router CPU
My router is quite good tho
https://openwrt.org/toh/xiaomi/ax3600
I got a fairly decent router, it just didnt actually have openwrt support (or again, their documentation is super outdated and shit)
It has like half a gig of ram and 6 core (4 core actually)
RT-AX1800S. It reboots daily so its memory doesnt fill because of my adblocker but thats really the only caveat
I had to find this to realize my router actually had openwrt support https://firmware-selector.openwrt.org/?version=23.05.3&target=ramips%2Fmt7621&id=asus_rt-ax54
The site itself didnt help at all
Yeah, mediatek stuf usually has openwrt
Including with installation, literally needed an old user forum to do that
Documentation is atrocious but good software for sure
Qualcom is more hit or miss, for example my router has a NSS processor (ah yeah that is why it's "6" core")
This SOC has two NSS processors. This NSS processors are able to handle some network / cryptographic functions and offload the main processors of the SOC. Currently, the Qualcomm NSS hardware acceleration is not officially supported in OpenWrt and maybe never will be. The code needed for that is not in the kernel of Linux and the patches provided by Qualcomm are only for very old versions of the kernel, so they can't be imported directly into OpenWrt and adding them require a lot of work and maintenance.
But no drivers really
there is a beta version tho
but I'm good, i'm not really pushing that much thru it
I got the thing cheap at micro center too. Mostly to run airlink with my quest, which unsurprisingly has been great
How much ?
I actually got 3 AX3600 for 140€
So like less than 50€ for each !
An awesome deal for 3 Wifi & routers
They were new
like even had plastics still
i cant add sodium
why ?
Did you install the Fabric loader first?
yes i cant add it to prism
You can
And then select add mods and modrinth it's all there
done
Yeah I mean aside from some curseforge packs (rare) you wont really need to visit external sources again. Does most of the stuff on its own
i was on add new instance by accident
It works there too
didnt for me
Don't even need loader
just do change version
and pick from right bottom fabric
phosphor only has 1.19 update do i still add
no
Not needed in 1.20+
Minecraft ouverhaulled their light system in 1.20 so not needed
go and add iris shaders
while you're at it
Won't work with nvidium tho, when you enable shaders, nvidium gets disabled automaticly
Can do almost everything in the launcher, it does automatic version checks, itll give you links if you need to open them in most cases if you do need to open it to download smth.
from modrinth?
yeah
looks good
If your game crashes, your java version might be wrong. Thats one thing it doesnt check
I think it works for fabric right ?
if you are asking me about the hud, no idea
Might not have for latest version, I didn't use it in a while
im getting 60fps and i checked my cpu activity and its at 3 % whereas my gpu usage is at 100
i think that is a problem
Should never peg your GPU like that in light modded. I ran MC Eternal In VR and thats a HEAVY pack
task manager gpu usage is showing what ?
intel performance telementry app
hmm ?
idk lemme send ss
You are on the IGPU ?
Huh, not possible F3 says RTX, wut
Hey 👋
oh no im on my gpu
not integrated
is that bad?
Very, but Im not ruling that in rn
are you plugged into what port ?
gpu 1
you have the nvidia drivers installed ?
yep up to date
open up geforce experience and update them ?
Up to date ?
Hmm, open the nvidia overlay
Alt + Z
i dont have that
and pop up the statistics
it doesnt let me
you got geforce experience ?
yes
idek how to see gpu usage on linux lmao
yes now what
i sent it in tech chat btw
where ?
tech 1
copy link and send here
You can also use nvtop
Go here enable advanced mode and go in game
You should see fps and other things
then send screenshot
I didn't know about that one I will check it out
I only knew about htop and nvtop
even the game menu is laggy
I kinda like it look ancient
No frills data only
even in full screen ?
amd
yes
You got me there
enable it out of the game and then go in game ?
i'm just fazed, don't understand why you lagging
You could try running DDU and reinstall drivers ?
this is only a problem in minecraft
not any other games
in games like fortnite iget 600+
do you have some kind of program maby doing this ?
What about in control panel of nvidia, did you mess with anything ?
I have had issues where my GPU being out of date has given minecraft issues
my gpu is a 4060 ti i think its not outdated
Granted I was using shaders in modded but
And mine is an RX6700
Who cares if your drivers are out of date
u siad outdated gpu gives minecraft issues
I would like to run Windows 7 from a USB to just take me back to that time
It is using the APU, it says intel UHD in the F3 menu there.
my gpu is fairly new as a 2023 one
Where ?
Which means your drivers could be a whole year out of date yes,
Disable your IGPU if you don't use it
for rendering or encoding
My friend with a 7600 had a similar issue where minecraft ran on IGPU
but the rest did not
Even plugged to the main gpu
how
i use intel arc
intel drivers
You don't have arc you have uhd 770 and an Nvidia gpu, right?
intel drivers for what ?

Disable the igpu in the bios kek
You can disable your IGPU no problem
it's a setting
Oh god dont make me walk them through the bios

