#palera1n
1 messages · Page 100 of 1
Sadly
But it’s whatever
I just restarted it
Like it said and it was fine
I now have palera1n
Possible to run palera1n on m series or intel only?
both
@celest holly
Can I jailbreak 18.5 ?
Palera1n guide ?
you can't
highest is 18.3.2
we need a palerain update for that
Wait let me check I think I might have 18.3
One sec
I have that version @warm tapir
then yeah if you have a A11 or lower device, you can do it
iPhone 11 works ?
Fuck
or ipad 7 or lower
best phone you can jailbreak is 14 pro max
Will be any jailbreak iOS 18.5 iPhone 13?
Soon?
No
Why not
Because no public exploits
Will be soon
Yeah for sure
Ye
no
Yes it will
misinfo
Why it will not
because
there are 0 exploits for 17.0+ which released in september 2023
what makes you think 18.5 will receive any?
It will
ok
Then how iOS 16 and 15 sas jailbroke
because they got an exploit
Only need to wait
Yes
more like 5 at this rate
they think 18.5 was released earlier than 17.0
No
okay but is there anyway i can find a solution where i can make do jailbreak on it or do i have to wait until its out for the ios 18.2?
no u cant
No
!t eta
We have no way of knowing. When there is news, it will be in #announcements
you have to wait, probably for a very long time
"wolves"
written by elijah golden & jonnie jupiter
produced by arbora
bro
ohhhhhh mbbb
@verbal galleon bro is THE aaron
Yo it’s the weekend
How do I get Ubuntu to work for this dual boot
It always get stuck in install at the curtin step
Or is it not on the list
@warm wadi
What step
I’m at the last part where you install it onto your system
At the installing system part of the Ubuntu stalled
It breaks midway and stops
I always see it stop at a particular step
Where it tries to install curtin
Whatever that is
But it breaks
idk honestly
I just read the guide again
Why are you trying ubuntu or debian
It quite literally says they will not work without a custom kernel
How does custom kernel work
U there?
How does custom kernel work
Nothing you want to deal with
Just use one of the distros that is in the list
except fedora and arch since those didn't work
Ima do pop
Guys
Someone can help me my iPad can’t install palera1n but it error failed to prepare bootstrap?.
it's /serverinfo
!t question give any info
Hey @gusty ermine, have a look at this!
Please include the following when asking for help:
- Device
(e.g. iPhone 12) - iOS version
(e.g. iOS 14.3) - Current jailbreak (if any)
- Solutions attempted
- Any relevant details
Please provide full error logs when asking a question related to any. Asking for help without providing them makes us unable to help you.
Thanks frnd
What jailbreak bypass can i use for pokemon go?
does choicy work?
is there a build of palera1n for 18.5? I don't care if I have to do like 100 things I just need to know
@shut stone
idk
not recommended to be used because uicache might be broken
But you can compile the iOS 18.4 branch from source
and then it'll "work"
that's what I was gonna say
what is the 18.4 branch btw
its the ios18.4 branch
only part 1 tough :(
just wondering, what was patched in 18.4 that even caused it to be broken?
what is it called I can't seem to find it
wtv I guess ill wait the year for it to release
it's not there 😭
I think it's private can you make it public when you can
dyld
received a patch that broke palera1n
Commands directly related to Modmail functionality.
[1] !selfcontact - Creates a thread with yourself
?help
what are you trying to do
@cosmic niche
!t guide
Hey @vapid crystal, have a look at this!
why are you pinging me out of the blue
1
good accident
@shut stone sent you a dm. Ty
hello
Can I jailbreak iPad mini 5 with iOS 17.5.1 with this?
no
Can I jailbreak my iPhone 12 mini with iOS 18,5
very famous
@shut stone sent you a DM
why do people keep spamming fake mrbeast promos?
hacked
hello, idk if this is the right place to ask this, but whenever i try jailbreaking with palerain rootful, i only get to the pongoos booting screen, then nothing more, ive left it there for like half a hour and nothing progressed, and if i try to redo it, it just boots to ios, can anyone help me?
Try unplugging and plugging back in when stuck on pongoOS booting
I’m trying to use palen1x jailbreak
I’ve got it on the USB but when I boot it up
The only thing that appears on my screen is
Palen1x v1.1.1
And nothing else does anyone have any advice?
does anyone know why like no tweaks work on palera1n rootful?
when opening substitute it says I'm using a jailbreak that is not fully functional
what tool did you use to get the iso onto your USB?
balena etcher
try ventoy
don't use palera1n rootful
Hello, I have a question. I’m quite new so I don’t really now everything about jailbreaking. I have successfully installed palera1n on my iOS 16.7 iPhone 8, then I have launched sileo, but here starts the problem. Some repos juste don’t want to install. I could install bigboss Chariz Havoc, limneos and miro92 (and also ellekit), but for others, I have an error message like this :
youre trying to adda. rootful repo on a rootless jailbreak
Hooo okay ! And can I like re jailbreak in rootfull ?
Why rootless > rootful:
- There isn't any storage penalty (such as the 2-5 GB bindfs or 10GB+ fakefs storage penalty) compared to stock iOS
- Most future development of both tweaks and palera1n will primarily be rootless
- In general, rootful tends to have more and harder to troubleshoot issues in comparison to rootless
Yes, tweak compatibility for older tweaks may be better than rootless, but many older tweaks can be patched in various ways to work with a rootless setup.
-# This tag does not apply to iOS 14 or earlier
Okayyy thank you so mush I understand better ! And also, how can I know which repo are rootfull and which are rootless ?
if you get architecture error
its not for your jb type
why not
.
i see
@solemn verge this should be edited btw now that rootless patcher exists
is there any way to get rootful to work?
we dont help with it
feel free to figure it out yourself
dont do rootful
Is someone having solutions for not being able to logging into apps while jailbroken with latest palera1n?
كحبا
if my ios device is jailbroken but sileo app is missing is there a way i can get it?
!t hiddenapps
Hey @distant garden, have a look at this!
When jailbroken there can be an issue where the package managers or jailbroken apps can disappear. This is due to an iOS/iPadOS bug that exists when there is at least one homescreen page hidden. If you are on Dopamine, you can open the app, press settings, and tap "Refresh jailbreak apps." Alternatively, you can tap the buttons below to open your package manager or create a new shortcut with the "Open App" action to open the app you would like.
i figured it out
ok
What’s the command
For what
does restarting my iphone x palera1n jailbreak ios 16 is okay? or it will lose my jailbreak?
if you restart or the phone dies you need to jailbreak again
It’s same process too, right?
Yes
All your tweaks stay
You don't have to reset again though as long as you never set a passcode, just re-run the jailbreak
I don’t have a passcode now in the iPhone X, but if ever I accidentally restart it, how can I re run the jailbreak?
Up to which version can Palera1n be installed on an iPhone X?
I don't have a computer😞😭😭😭😭😭😭😭
the same palera1n -l command that you ran earlier
i have a dm
what guide did you follow originally to jailbreak
yeah
it's the same as before
every reboot follow the guide
thankyou thankyou, ill try restarting my device later to test it
why would you purposely want to restart your device to test it i'm confused ?
to test if it would work 🥲
its literally my first time doing it so im scared
there's no reason it wouldn't work - it's the same as the first time you did it.
just leave it jailbroken right now and you can re do it later once it dies because it just gives you more hassle to restart purposely and do it for no reason
okay okay, thank you so much again! im sorry for having too many questions
it's all good
What version does palera1n support up to?
18.3.2 on checkm8 devices
Damn, I’m guessing I’ve got to wait awhile for 18.5 :/
Thanks
Do onboard blobs have cryptex1 embedded in them?
Are there any guides to save them?
After jailbreaking with palera1n, my iphone X on IOS 16.7.11 will randomly reset and I'd lose my jailbreak. Is there a fix to this?
Put your apticket, generator, cryptexticket and cryptexseed in this format
Your apticket and generator is available in a regular blob
The cryptexticket is in /private/preboot/cryptex1/deviceinfostuff.im4m
And get your cryptex seed via x8a4
(The cryptexticket needs to be converted into a readable shsh format via img4tool/something similar)
Thanks!
Got the cryptex seed already, so I think I’m good in terms of that!
Are cryptex1 tickets unique to each version number? Saw some tweets saying that some cryptex1 tickets may work with similar version numbers
Could I tether downgrade terdus medula to iOS 18, then delayOTA to 18.3.2, 18.4 and 18.4.1 and save the onboard blobs and cryptex1 tickets?
The tickets are device and version specific like regular blobs
It just comes down to wether that cryptex version is compatible with said similar version or not
Thanks for the explanation
Well yeah but iirc you need to change a specific hash in order for it to work
@shut stone probably knows more
Are there any ways to save beta blobs with tss terminal command?
I’m getting an error “checking tss status failed”
Weird thing is that BlobSaver also doesn’t automatically save 16.8b1 when I select beta blobs. I have to manually specify the url from ipsw dev
Problem with blibsaver is that you can’t specify cryptex1 :/
I read that tss could use the build manifest file to save blobs; however, I’m exactly going to download a 8gb ipsw just for the build manifest file
I found a terminal script called partialzipbrowser (GitHub page is down, had to download through way back machine). This script can get the build manifest from the ipsw link. However, apple has changed their url for their ipsw and the partialzipbrowser script throws an error when I use the new ipsw url
Works fine when I test an old iOS 11 url, strange…
I’m hoping to delayOTA to 18.3.2 and save onboard blobs and cryptex1 in the next couple of days as the delayOTA window is expiring in less than 2 days time
Greatly appreciate all the help I got and any help I can get!
using pzb on a url provided by appledb fails?
(i'm assuming you meant 18.6b1 and not 16.8b1 since the latter doesn't exist)
Specify the buildmanifest for the beta
The arg is -m i think
Also
Don’t download the whole thing
Wow, that worked! Thanks bro!
Yeah, strangely enough, it didn’t work. Luckily xrt sent me a direct link to the build manifest. Thanks for your help anyways!
Works for every ipsw, just remove the ipsw name and add BuildManifest.plist
can someone help me with downgrading palra1n from this version palera1n: v2.1-beta.2 to palra1n 8?
macOs with terminal
doesn't exist dawg
i got it solved, i grab the install.sh file from the wikow curl url and edited the version to target the one I needed.
it. was beta 8 I needed version 2
v2.0.0 beta 8: Dusk this one
I needed the roll the loader back
pokemon go?
yup
i need sme blobs from ios 18.5 down on iphone
!t blobsfaq
Hey @mellow island, have a look at this!
What's a blob?
They're like golden tickets, but instead a digital signature made by Apple that was saved at the time when the signing window was open. If you possess one (or many), keep them safe.
How do they work?
They can be used in a program called futurerestore to restore to a firmware in which the SEP/Baseband is compatible. To check SEP/Baseband compatibility, check /tag sepbb.
Make sure to not use misleading sites. Stick to reputable sites like ios.cfw.guide and AppleDB.
Regardless of SEP/Baseband compatibility, any/all blobs should be saved for future downgrading abilities.
Can I use other people’s blobs?
No. Blobs are a file containing a special key specifically for that one device to allow downgrading to a specific firmware. Due to the way they work, only Apple can create them for your own device.
Can I save them now?
It depends. Blobs can be saved at any time while they are signed, and it is crucial to save them when Apple releases new firmware, because they can only be saved for versions that are currently signed. There is one exception to this: if you are jailbroken and Apple has unsigned the version you're currently on, you may save onboard blobs for that version. If you are not jailbroken you cannot save blobs for an unsigned version.
who on earth is recommending this
there is absolutely zero relevant difference for pogo stuff between 2.0.0b8 and 2.1b2
So any update on whether delayOTA works with terdus medula?
I think the 18.3 delayOTA window will be closing within the next couple of hours" :/
pretty sure it doesnt
@shut stone
Hi
Hi
It works, just need to do manual steps not documented anywhere online
I'm not sure if I can say those steps in detail
But it does work, that's how I got my iOS 18.3.2 blobs
Hi, is it possible to share general steps? Thanks
<@&355174844205367317>
hello guys, i am trying to jailbreak my old iphone as i got locked out of everything completely. I can get in dfu mode at times and sometimes not! can you help with a better guide ?
shit cable
Is there any way to spoof IMEI
no
Not even for specific apps?

to remove jb palera1n, i can just hit restore system on my phone right guyss?
yes
im rootless, anyway remove it without restoring the phone?
!t rootfs
To revert the jailbreak installation on your device, follow the steps below.
palera1n
Rootful: palera1n --force-revert -f
Rootless(default): palera1n --force-revert -l
If the above methods didn't work, see /tag rootfscli for more options.
Dopamine
Reboot, open Dopamine, open the Settings page, then press "Remove Jailbreak"
If you would like to further remove any remnants left after removing the jailbreak, you can install varClean15
Note: Since the rootfs is sealed on iOS 15+, it remains the same across all devices. Thus, "Restore rootfs" means practically the same thing as "Remove Jailbreak"
If you're unable to restore rootfs the normal way, you can do it from a terminal (e.g. NewTerm or SSH).
If your device terminal prompts you a password, its gonna be alpine
unc0ver
Install Snappy from your package manager, then open a terminal and type su root -c 'snappy -o', then reboot.
Odyssey / Taurine
Open a terminal and type these commands:
sudo snaputil -n orig-fs $(snaputil -o) /
checkra1n / odysseyra1n
Open a terminal and type su root -c '/binpack/usr/bin/snappy -o', then reboot.
With checkra1n 0.12.3 or above, you can also restore rootfs from your computer:
- macOS:
/Applications/checkra1n.app/Contents/MacOS/checkra1n --force-revert - Linux:
sudo checkra1n --force-revert - Odysseyn1x: Go to Shell and type
checkra1n --force-revert
Still no word on tvOS 18.5 support for palera1n?
Yo
we don't even have normal 18.5 support
is that enough or do ineed more steps
are you using rootful or rootless
Rootfull but I am restoring throug iTunes now
Factory reset or like restoring the whole device
RIP palera1n. Probably done with updates.
Palera1n 18.4-18.6 works but you need to do some things to make it work.
How so?
Gatta compiled the beta version on Linux or Mac for starters
Not sure why the devs aren’t making a guide how to do it. Took me weeks of asking but finally works for me
Cause it's not meant for release yet
It’s better then nothing
Yeah but it's basically a developer build
Take it for example when fugu 15 was released
Could it have been installed and have a guide written? Yes. Should it be recommended to the everyday user? Probably not
As far as I know the only issue with the latest palera1n for 18.4+ is that it’s harder to find the palera1n app as you need to do it via shortcuts app
It's always been like that
iOS bug
Is there even a prebuilt version
Not as far as I know. Had to built it and attach files to get it to work.
But I can confirm it does work as intended
And if you have had palera1n previously on 18.3 or lower then the icon does show up and you don’t need to use shortcuts app to get to it
Exactly. I saw someone today delete windows trying to liveboot linux (no offense to the person)
Haha
Well that could happen even with an official release
But it’s not too complex and a simple guide would get 99% of users thru within a few mjnutes
Even though it may not seem that hard to you to build it, for a lot users they can't figure out how to open terminal.
Damn that message took a long time to send
Sure. But they could always just Google or ask here. I’m pretty good at figuring these things out and until I was told how to do it I wasn’t able to as there wasn’t any public docs on what to do.
Also a quick YouTube video guide would help
they're not
last i heard if you're jailbreaking for the first time on 18.4 it's broken
even with the compiled version
Nope
I did it
If it’s not first time then app shows up fine. If first time then need to find it in shortcuts and same for silio / zebra
well that's just a normal palera1n (and dopamine) bug
Not from my experience. Always shows the palera1n icon normally for 18.3.2 and under
it's a bug where if you have multiple home screen pages
same thing happens with dopamine where sileo/zebra don't appear
Gotcha. I’m not so familiar with that. Just posting my experience with palera1n and getting iOS 18.4+ to work with it
@warped horizon no
it's an actual 18.4+ issue
uicache is just straight up broken on 18.4+
but the same issue happens on lower versions no?
They’re not what, updating it anymore?
not done with updates
Ohh gotcha
Is it hidden on tvOS or just iOS? I’ll learn to compile it. Haven’t jailbroken my Apple TV in a hot minute.
Never used tvOS
How’d you compile it exactly?
generally no but even if it does usually it's just one time
this is different
it happens to me on 16.5 dopamine every other day though
idk
Klk
hi
Im running into issue when im trying to jailbreak using thr palera1n script for macOS. It goes upto booting kernel then stops
My phone is an iphone 8 and ios 16.7.11
Unplug and replug usb from phone and it should move on
Also make sure you are using a usb type A not C
Once you have sileo does that mean that your phone is done jailbreak?
And I can go back to normal windows and unplug my phone ?
yes
once it says it's finished you can go back to windows and unplug
does palera1n or checkra1n work on macos tahoe beta
don't see why not
i can get the device into dfu mode but checkrain fails with error -12 and palera1n fails to boot into pongoos
im using type a cable
uhh
oh and the phone is like
ok well it's not a macos tahoe issue
forcibly stuck in recovery mode
cause i've seen this before
i can not get it out in any possible way
do palera1n -n
dont use that
i know, couldnt be arsed to find a replacement
ok
!t utilities has some ig
Hey @merry crystal, have a look at this!
- iMazing - macOS and Windows - Not open source
- iFunBox - macOS and Windows - Not open source
- iExplorer - macOS and Windows - Not open source
- Legacy iOS Kit - macOS, Linux, and Windows (however windows is not recommended and a linux liveboot should be used instead) - Open source
im also not sure what ios version it is
i got it from a local market the phone
it has the itunes icon on recovery scren
do palera1n -I
might be ios 12..?
ok
ok well see what palera1n says
just tells me its an iphone 8
no ios?
no
im in class gimme a few mins
ye'
so then it's ios 10-12
is the fw corrupted
probably
fuck
palera1n -n didn't work?
no
kk....
wait does it show a link at the top of the screen
ye
finder
or are you on linux
macos
yeah just finder
ok

me and a friend tried on two different devices
dunno what do
do u know this error
ok hold
??
That iphone 8
how would you know
Its my phone
no it's not
thats my friend trying to help me
@merry crystal is this true
idk i think so
and how would you know if it's locked
he gave it to me
it's not booted
i have no idea
there is no way to know
hes telling me this now
bc its my phone i got?
i got it from the market
yeah and apparently you got it like this in recovery
it got given to me in recovery
oh
No, i got it with the lock screen and pin, then put it in recovery
and then i couldnt get it out
so i gave it to him'
lol
how did you manage to do that 😭
wdym?
i got it at a market
i read the imei and its icloud locked anyway
I mean how did you manage to get it stuck in recovery
Its corrupted pretty sure
o
well
ok makes sense now
ye
no, but its corrupted anyway
i dont think it would
u can restore it to the setup
you can't use the phone when it turns on
IF it turns on to setup
yes
nope
and now i cant even restore it to ios 16
i'd just give up on it
yeah
ts is so buns
ive got an x we can try it on too
even if you did manage to get it to boot up it's a brick
you could have @merry crystal plug it into his mac and run palera1n -n
to try to kick it out of recovery
ill try again
i think
@warm wadi doesnt work
straight back into recovery
this is what it shows with -I
this is similar to the problem i had at home
oh
ill try tmr
ok so that's not that bad
I go to the markets to buy and collect iphones
Yeah me aswell
I got 53 phones in a lot last week
nice
48 apple devices and counting
awesome, whats some of ur coolest stuff?
Hm
I've got a iphone 5C on 7.1.2
theoretically what if i requested a bypass for activation lock 🤖
!t icloudbypass
Hey @merry crystal, have a look at this!
Discussion of iCloud/Activation Lock/passcode/MDM (Mobile Device Management) bypass, asking how to do it, or posting about it is not allowed. No, it doesn't matter if the phone is yours or not. We will not help you with it. If you do own it, it’s recommended to use the links below.
If you forgot your Apple ID - Apple Support
If you forgot your Apple ID password - Apple Support
How to remove Activation Lock - Apple Support
If you forgot the passcode on your iPhone, or your iPhone is disabled - Apple Support
Oh awesome, on wednesday i got a 5 on ios 7.4 or smthing
it's late at night rn so I can't think of some other cool devices I have but they are there
ok gn
I also got a dead se 2 😦
<@&355174844205367317>
hey, trying to put the iphone into DFU mode. but everytime it goes into recovery it IS in DFU mode. but it asks me to press enter when ready for DFU mode
recovery is not DFU
what type of cable are you using
i just realized only usb a is supported
Is the device jb rootless but not using it (not in jb mode) causing battery drain?
no
I’ve tried different ports, different cables nothing. It worked 4 times after multiple reboots but now it won’t budge I’ve tried replugging the lightning cable too in pongoOS
Proof that it HAS been jailbroke
iPhone 8 Plus.
jalbrak
What operating system is this ? Ubuntu ?
Correct
I had same issue. Let me find the command that fixed it. One min
sudo systemctl stop fwupd
Then try again
That temp fixed it for me. And if wanted to perm fix it then did this.
echo -e "[fwupd]\nDisabledPlugins=dfu" | sudo tee /etc/fwupd/fwupd.conf
sudo systemctl reload fwupd
Is there a way to unlock icloud bypass? on iphone 11
!t icloudbypass
Hey @hollow orbit, have a look at this!
Discussion of iCloud/Activation Lock/passcode/MDM (Mobile Device Management) bypass, asking how to do it, or posting about it is not allowed. No, it doesn't matter if the phone is yours or not. We will not help you with it. If you do own it, it’s recommended to use the links below.
If you forgot your Apple ID - Apple Support
If you forgot your Apple ID password - Apple Support
How to remove Activation Lock - Apple Support
If you forgot the passcode on your iPhone, or your iPhone is disabled - Apple Support
Thank you for your input however it didn’t work.
Gotcha. That’s what worked for me. Also make sure usb type A cable and try a diff usb port
I did forget I’m running this install on AMD chips. I tried it on my main PC and that did not work however with my laptop running an A6 chip it DID work the first couple of times. So I’m doing a fresh install with a different hard drive
How to jb ipad 7th
!t guide
Hey @onyx vortex, have a look at this!
press control + c and re run the command
HomePod 💀
What broke palerain for Apple TV after tvOS 18.2
Is it just not updated yet?
SSV was implemented in 18.3 iirc
before that palera1n for apple tv was realfs rootful
What’s SSV
I have an Apple TV with tvOS 15
I wanted to update but I guess I will not be lol
!t rootless
Rootless means you cannot write to the root filesystem, only leaving /var and /private/preboot being writable. Semi-untethered jailbreaks such as Fugu15/Dopamine must be rootless while semi-tethered jailbreaks can simulate a rootful installation by creating a clone of the existing root filesystem. Current semi-tethered jailbreaks such as palera1n have the option to be rootless anyway.
What does this mean for the average user?
Tweaks would need to be updated to support iOS 15, check if the tweak you’re installing works on 15. Not all tweaks will work out of the box for iOS 15.
SSV prevents writing files to the root filesystem
What would be impacted
So would I be able to install it on 18.5 or is it like broken?
no, the jailbreak needs to be updated
Alright
is there even any reason to have a jailbroken apple tv 💀
theres like no apps for this thing
that i can see atleast
!t whyjbtv
Why jailbreak an Apple TV?
Tweaks and features such as:
AirMagic - Control your Apple TV via any web browser.
DalesDeadBug - Spoof your firmware version.
AppStore++ - Downgrade Apple TV apps from the AppStore.
nControl - Use other controllers for your Apple TV.
TVControlCenter - Install control center tweaks for ease of access. (13+ only)
Breezy - AirDrop files to and from your Apple TV from any device.
SnowBoardTV - Decorate your Apple TV homescreen with awesome themes!
Doom & Quake - Play the classics from your childhood right on the big screen!
emulators, multimedia, code execution, custom respring animations/wallpapers/ screensavers and so much more!
Show the BundleID of an App inside the AppStore
it was implemented in tvOS 18.2b1
the only platform without SSV now I believe is watchOS... which is interesting
what about bridgeOS?
oh right bridgeOS
or has it not been looked into
What is bridgeOS?
I think I’m going to update my Apple TV to tvOS 18.5
I can’t install half the apps I need and want on this old version and the jailbreaks aren’t really that enticing for a streaming box lol
Literally I can’t install anything except for YouTube 💀
AppStore++ was not working
Anyone know how to jailbreak Netflix to get a free account i did It a while ago i forgot
!t piracy
Hey @solid hollow, have a look at this!
WE WILL NOT ASSIST WITH PIRACY
What is piracy?
Piracy is a form of unauthorized redistribution such as getting apps, in-app purchases, tweaks or themes without paying for them. This is often also unsafe as you are not getting things from the official source and pirated versions could have malware. This includes getting IPA files for free apps.
How do I know if I have piracy?
If you are not sure if a repo is piracy or not, you can send the name of the repo in to a genius, mod or admin in a DM and ask for further information. If you send a piracy link in a channel you will be filtered and informed further via DM. Doing so may also result in a warning from a member of staff. Use DMs to avoid the possibility.
Do note however that sharing piracy in DMs for any other purpose than asking if it's safe is still a violation of the rules and is warnable.
I have piracy repos and/or pirated tweaks, what should I do?
The standard procedure here is to remove jailbreak (also known as "restore rootfs" on older jailbreaks). To learn more, type /tag rootfs (or /tag legacyrootfs for older jailbreaks).
Aint the point of this server to jailbreak stuff so its not piracy
Piracy is those websited
No
Jailbreak ≠ piracy
Ohhh ok no problem
Try broadening your search query.
Looking for some help jailbreaking iPad 17.7.8 using palera1n, no errors it seems but when done no app showing.
Did you try doing it again ?
im on mac. if that helps
Seems fine. On your iPad does it show palera1n grey/pink loading screen after it jailbroke ?
Or did it just show Apple logo and move on ?
Also was passcode disabled on iPad ?
Just logo and yea I’ve reset and erased it
Is this the latest version of palera1n ?
I think this is not ? Maybe go to palera1n site and make a fresh one from the latest ?
Yes latest version for pc from there website
Can you send screenshot of screen before the one you sent ? Should say what version of palera1n etc
Take a video of the screen while you’re running palera1n
Doesn’t matter
!t guide
Can someone please help me rank up
it's the same thing
be active
2.0.2
ok cool. and you deff see the purple palera1n splash screen when booting up?
on the ipad
No just apple logo
ya then its not working. u sure this is ios 17 your ipad is on? can you double check and send screenshot?
and your using the usb flash drive method for palera1n? or running on ubuntu/mac?
I would suggest to try redoing everything.
- remake the palera1nX flash drive. make sure get latest iso etc and load it properly using etcher or similar.
https://docs.website-msw.pages.dev/docs/get-started/installing-palen1x-windows/
- do a full factory reset on the ipad. Maybe even do a DFU itunes restore. you would have to put your device in DFU mode then connect to computer and open itunes. it will mention device is in dfu mode and ask if you want to do a restore. This would be a better restore then a normal one.
lmk how that goes
ok
you have iphone xs on ios 16.3??
yes
good luck
there is no 16.7.11 for Xs
i have x not xs
Then fine
😢
Yea ive used ventoy, etcher , Rufus , I’ll have to try the iTunes dfu
USB and windows
ya try etcher and make sur you have the latest palera1nX iso fromt he official palera1n site
@vernal jay here's your issue
you're not using the latest version of palera1n
https://github.com/palera1n/palera1n/releases/tag/v2.1-beta.2
Files
palen1x-${version}-x86_64.iso: for 64-bit computers
palen1x-${version}-x86.iso: for 32-bit computers
I see now thank you
good pfp
You’re using some unofficial thing I have never heard of and it also uses an ancient palera1n version that does not work with 17.7.8
Follow https://ios.cfw.guide/using-palen1x/ and get v1.1.9 beta
Also whenever you see the word panic on your iPad screen automatically assume something went wrong
A complete iOS jailbreaking guide, from stock to jailbroken.
im homosexual but nobody will know because nobody checks this channel
congratulations to your sexual orienation
Now i know that ur homosexual
nuh uh i lied
how can i chekc if this works for me
<@&355174844205367317> random ipa
What phone and Ios version
ipad air 4 and ios 17.6.1
cant
aigh
hi
hi
um im kinda new but how do i flash unsigned ipsw to my old ipad air 2
you dont
you cannot flash unsigned ipsw
thats all
I dont know what filter are you talking about regarding this issue
Couldn’t you do that if you saved blobs or whatever?
If your kinda new as he put it…more then likely he didn’t save blobs nor even knows that blobs are
yup 😭
Yoru is so good
Yoru is so good
Yoru is so
Yoru is so good
help
your so good
*Yoru is so good
my ip is dirty now what should i do
clean it
pour water on ur router to clean ur ip
how is it palera1n related
are you even trying to charge it
Nothing that a paper tower and isopropyl alcohol cant fix
How
Ooo
soap and towel
Can someone give me official palera1n website?
I am going to flash palera1n jalbreak on my windows PC, but it says ISO to be flash using balena and I am finding the right ISO file to be downloaded to be use on an windows device (Intel) since they said can have issues using AMD CPU, Can someone help out pls
x64_84
Mac OS or Linux?
bro
ur on windows
did ur ead
wait
im dumb
lmao
A complete iOS jailbreaking guide, from stock to jailbroken.
Any has a hide Jailbreak detection tweak that works.. tried Shadow, don’t work on mine.
Palera1n rootless jailbroken, 16.7.10
Don’t want to install paleh1de as I’d have to convert tweaks to arm64e
[[choicy]]
Advanced Tweak Configuration!
with what
i have an iphone 8 on 16.7.11. i want rootless, do i use palen1x?
and do you really have to erase all content? wtf
and my pc is amd ryzen so that's also great
nothing i can do now i suppose
it may still be worth trying (especially if it’s a laptop with Ryzen)
if you only currently have Windows yeah sure
!t nosep If you’ve ever set a passcode before, yes, thank Apple for that
Hey @mighty basalt, have a look at this!
When using checkra1n/palera1n on the iPhone 8/X running iOS 14 or later, you will not be able to use any of the following SEP features in a jailbroken state:
- Passcode
- Touch ID/Face ID
- Apple Pay
Additionally, if you’ve ever enabled a Passcode on iOS 16 on the iPhone 8/X, you’ll need to erase all content and settings in order to successfully jailbreak with palera1n.
can you restore after erasing?
what are you asking
you can restore a backup that doesn’t have a passcode set if that’s what you’re asking
reseting device without erasing doesn't fix the issue?
i didn't think passcodes was included in backups, reason i asked.. that's stupid
if i erase i can't get any of the data i had restored
all because there was a passcode previously.
who wouldn't have ever had a passcode, need to restart entirely with a new phone to palera1n
well there is no way to reset the device except either:
- erasing all content and settings (through Settings)
- restoring with iTunes/Finder
there's a way to reset device settings / etc without erasing content
my recovery mode just ain't working with palera1n. I’m pressing all the right buttons, but it keeps shutting off too early
but thanks for the help. i gotta get rid of this phone
with shell
what cable are you using first of all
second of all the screen will go black while entering into DFU
if you’re doing it correctly when it’s done entering DFU it should stay black
I’m confused what exactly is happening here
if possible (understandable if it’s not) could you show a video of what happens
sileo
Is there any way to use SIM codes in messages with palera1n?
they sain to use my apple ID for use messages app
is possible to log into iCloud on a jailbroken ? i really lost
Ya only if you know the credentials
!t icloudbypass
Hey @valid grove, have a look at this!
Discussion of iCloud/Activation Lock/passcode/MDM (Mobile Device Management) bypass, asking how to do it, or posting about it is not allowed. No, it doesn't matter if the phone is yours or not. We will not help you with it. If you do own it, it’s recommended to use the links below.
If you forgot your Apple ID - Apple Support
If you forgot your Apple ID password - Apple Support
How to remove Activation Lock - Apple Support
If you forgot the passcode on your iPhone, or your iPhone is disabled - Apple Support
Will lose something?
How to get filza
[[libsparkcolourpicker]]
Simple to implement, simple to use colour picker library. Built by SparkDev.
@valid grove add https://havoc.app or press the add repo to zebra button above
You have sent a link to a repo, you can use the buttons below to open it directly in your preferred package manager.
I add for zebra
But keeping in the same error
:((
Idk what is wrong
[[libsparkcolourpicker]]
Simple to implement, simple to use colour picker library. Built by SparkDev.
you did this?
once it is added then you can install aim
it should automatically add to your package list
if not go to search and install it
Yes I dit it
hi
use choicy
then you either did not do it correctly or zebra is not working
what jailbreak and ios is this
also search for "libsparkcolourpicker" and install it
ios 16.7.11 Palera1n
aim does not support your ios
ah :((
thats okay
i just need bypass 1 app
how i can found choicy ?
in settings
i now but where
did you install it
zebra
Advanced Tweak Configuration!
hi, i have iphone 7 plus, can i jailbreak with palera1n in windows?
Choicy work in banks apps ?
Try it and see
what ios
also if you have windows you should use palen1x
I try but the location don’t work
what banking app
PicPay and infinitepay
I think vnodebypass working only in 16.6.1
1.15.8 , but someone recommend me dopamine, its ok?
do you mean 15.8.1 ?
does it let you remove libkrw0-dopamine or no
No if I remove
Remove all
I’m really sad cause I think I need gonna remove palera1n for use banking apps :((
sorry yes
Dry
yes you should be using dopamine
Guide to installing Dopamine using TrollStore
Help jailbroke phone with checkrain but I don’t know how to delete the iCloud lock thingy do u know how to I have a max of that helps
!t icloudbypass
Hey @silent anchor, have a look at this!
Discussion of iCloud/Activation Lock/passcode/MDM (Mobile Device Management) bypass, asking how to do it, or posting about it is not allowed. No, it doesn't matter if the phone is yours or not. We will not help you with it. If you do own it, it’s recommended to use the links below.
If you forgot your Apple ID - Apple Support
If you forgot your Apple ID password - Apple Support
How to remove Activation Lock - Apple Support
If you forgot the passcode on your iPhone, or your iPhone is disabled - Apple Support
Modulators
Modulators
He crime
Please stop criminal
Illegal
Odulator
If u bought why it has Mdm
🇹🇨
Its ur schools property? The ipa
Why they mdm?
Its illegal To put mdm on someone else Property No?
Yes its illegal for them to put mdm on ur device no consent
ohh
your fault for giving it to them
oh also @valid grove the aim issue was partially my fault because I didn't realize that libsparkcolourpicker on havoc does not support your ios but libsparkcolourpicker on the developers repo does. I know I said AIM doesn't support your iOS but you can try adding https://sparkdev.me/
You have sent a link to a repo, you can use the buttons below to open it directly in your preferred package manager.
ok don't worry i will test it now 
I have Linux booting on my iPhone 8, What partitions are okay to edit? I have a few available that I can modify to get a "root filesystem" on, but idk which ones are safe to edit since I still want the ability to be able to restore to an iOS version.
/mnt # ls -l /dev/nvme*
crw-rw---- 1 0 0 249, 0 Jan 1 1970 /dev/nvme0
brw-rw---- 1 0 0 259, 0 Jan 1 1970 /dev/nvme0n1
brw-rw---- 1 0 0 259, 1 Jul 5 15:18 /dev/nvme0n1p1
brw-rw---- 1 0 0 259, 2 Jul 5 15:18 /dev/nvme0n2
brw-rw---- 1 0 0 259, 3 Jul 5 15:18 /dev/nvme0n3
brw-rw---- 1 0 0 259, 4 Jul 5 15:18 /dev/nvme0n4
brw-rw---- 1 0 0 259, 5 Jul 5 15:18 /dev/nvme0n5
brw-rw---- 1 0 0 259, 6 Jul 5 15:18 /dev/nvme0n6
brw-rw---- 1 0 0 259, 7 Jul 5 15:18 /dev/nvme0n7
/dev/nvme0n1p1 seems to be an apfs partition, no clue what's on it other than some core iOS files. (Posterboard.app, SOSHelper.app, etc.)
figured this would be the best place to ask

Tyy
Working
🔥

🥺
nvme0n1p1 is "sealed" whatever that means
what ios are you on
16.6.10 i think
Likely the SSV seal if you're on iOS 15+
latest - 1 revision
what maxine said
it prompted me to update to ios 16.x.11 which fixes some icloud "advanced data protection" bug thingie
wot is ssv
Signed System Volume
aha
and what does sealing do
tldr any tampering with system shit that isn't in /private/var and your device is no longer bootable
aha
are there any of the nvme* devices that are writable and recoverable though?
or isn't that known
yeah
Probably not any worth reading/writing to
wdym by worth
i need somewhere to store a rootfs for postmarketos lol
since a ramdisk is too small for the poor poor 2gb ram
i honestly have no clue where you can store that
I don't think so
😔
But I may be wrong
since i do have the linux kernel booting and an initramfs loading,but i just have nowhere to actually store an installation of postmarketos
and i have gotten DRM working, just kinda useless with <2GB of space to work with 😔
there are all the block devices 😔
no clue what nbd is
me neither
"network block device" apparantly
🙏
what i could try, but would be incredibly jank and non-ideal is have a lightning->usb adapter and have the rootfs on a usb stick 💀

Sealed *
/private/preboot
Yeah he left
do i have to use... REDDIT? 🤮
Wsg
and by recoverable i only mean that I can restore with idevicerestore, idc if ios doesn't boot until i do
Choicy is bettee bypass ?
which one is for windows to older ios
https://github.com/asdfugil/ipad6-ipados18 yk how this exists, would it be possible to do this for ios 26 on an ipad 7th gen?
anyone here with a ryzen cpu? I've JB my device many times (Iphone x 16.7) without issues but this one time im just on a constant fail heuristic strategy loop when I try to do it... does it just mean i gotta retry and retry till it goes thru (since its AMD ryzen) or what? ( it was 100% success rate for me weirdly before even tho I always used AMD pc)
no
that only exists because the ipad 7 and 6 are essentially the same device
and the former got ios 18 so most drivers and such already exist
oh
is the ipad 8 close at all?
6? 7?
ipads
6 7! 😂😂
You can jailbreak 18.5 on iPad 6th and 7th gen.
not officially
It's not released officially and I (respectfully based on past messages with this user) do not think they would be able to build it
Fair enough
6 7!
mustaaarrrddddddd
Would it be theoretically possible to do it on the iPad pro a10x? From my understanding, the a10x only has a couple more cores and is basically the same as the a10
A10(X) is the same as A10 basically
no its not

