#palera1n
1 messages · Page 88 of 1
@wind kayak is this rootful or rootless
Idk did "palera1n - l" from palen1x
Is the ipadOS 17.6.1 on palera1n still accurate, my ipad updated to 17.7.3 for some reason while it is a A10 chipset
whwn will palerain be available for windows
wdym by accurate
palera1n isn't available on Windows and probably never will be due to how it was made. But you can use palen1x to boot into an OS made for palera1n.
A complete iOS jailbreaking guide, from stock to jailbroken.
You'll just need a USB drive, you can setup palen1x in Windows
is palera1n supposed to uninstall itself/remove sileo and the palera1n app if the phone dies?
Types of jailbreaks:
Tethered
The device must be booted using a computer every time, otherwise it won't boot at all. This type of jailbreak is uncommon. (e.g.: redsn0w, 4039)
Semi-tethered
The device must be jailbroken using a computer every time it's rebooted, otherwise it will boot in unjailbroken state. (e.g.: checkra1n, palera1n)
Semi-untethered
The device must be jailbroken using an app every time it's rebooted, otherwise it will boot in unjailbroken state. A computer is usually used for the initial installation, but it's not strictly necessary. (e.g.: unc0ver, Odyssey, Taurine, Dopamine)
Untethered
The device will stay jailbroken after a reboot, no additional action is required. This type of jailbreak is uncommon. (e.g.: Pangu9, Fugu14)
It doesnât uninstall but it wonât persist anymore. Itâs intentional design with the stuff possible
It cannot be untethered
ah, rip
are there any untethered jailbreaks i could get for an iphone 8 with ios 16.7.10
Not untethered or semi-untethered
damn
wait, is it possible to downgrade ios versions?
maybe i could downgrade it to get dopamine
No
damn, really? there's absolutely no way?
i mean, surely there's a way to install an update file or something via DFU mode
Unless you have blobs for 15 and below thereâs no way
there is
the version just has to be signed
but can't futurerestore downgrade to unsigned versions?
If you saved blobs for iOS 16.6/16.6.1 when they were signed yes
But it's not very functional on A11
What's a blob?
They're like golden tickets, but instead a digital signature made by Apple that was saved at the time when the signing window was open. If you possess one (or many), keep them safe.
How do they work?
They can be used in a program called futurerestore to restore to a firmware in which the SEP/Baseband is compatible. To check SEP/Baseband compatibility, check /tag sepbb.
Make sure to not use misleading sites. Stick to reputable sites like ios.cfw.guide and AppleDB.
Regardless of SEP/Baseband compatibility, any/all blobs should be saved for future downgrading abilities.
Can I use other peopleâs blobs?
No. Blobs are a file containing a special key specifically for that one device to allow downgrading to a specific firmware. Due to the way they work, only Apple can create them for your own device.
Can I save them now?
In general, yes. Blobs can be saved at any time, but it is crucial to save them when Apple releases new firmware, because they can only be saved for versions that are currently signed. There is one exception to this: if you are jailbroken and Apple has unsigned the version you're currently on, you may save onboard blobs for that version.
it needs a specific key, yeah?
is the key the same for all blobs saved for your iphone? or does the key change each time a blob is saved?
if its the same for all blobs, wouldn't it be possible to find the key for my iphone and set the key in the blob to be my iphone's key?
They're device-specific
blobs are unique per version, per device
you canât edit a blob because it would invalidate it
lets go gambling!!!
Insane luck if that were to happen
there's also no way to make palera1n persist through the phone being restarted?
No
oh yeah, what's the difference between palera1n rootful and rootless?
ive seen both mentioned and idk the difference yet
!t whyrootless
Why rootless > rootful:
- There isn't any storage penalty (such as the 2-5 GB bindfs or 10GB+ fakefs storage penalty) compared to stock iOS
- Most future development of both tweaks and palera1n will primarily be rootless
- In general, rootful tends to have more and harder to troubleshoot issues in comparison to rootless
Yes, tweak compatibility for older tweaks may be better than rootless, but many older tweaks can be patched in various ways to work with a rootless setup.
this is about palera1n rootful which isn't real rootful
real rootful has access to all root and user files
palera1n rootful will create a fake "root" to store jailbreak stuff while not messing with your actual rootfs
and rootless only has access to /var and some other directory I forgot, which is all you really need for tweaks unless they mess with the boot process, this also makes a jailbreak easier to delete if needed
Is there an alternative to FancySelection tweaks ios 16.7.10
Hi all,
Sorry to bother you, but I have a quick question and I wasn't able to find an answer from my side,
I would like to upgrade my ios version from 14,8 to 16.7.10 on my i8+, currently and since a while, it has been jailbroken with checkrain, but now a lot of apprs are requiring ios 16 as minimun version and Im stuck
TLDR : is it possible to jb i8+ ios 16.7.10 ?
Thanks in advance for your help gus
Yes
Well the bot tuah helped me so , thanks to the dev đ
Jailbreaking is performed with Palera1n
thanks bro
Does the new pelara1n supports IOS17.6?
Ios 17.5.1 A13 supports?
@limber pagoda no
@wheat thunder what device
iPhone xs
no
Oh well thanks
Sorry guys, I have another question,
Will I loose my tweaks et tweaks data if I upgrade from ios 14.8 checkrain to 16.7.10 palerain ?
ftm, I did a full backup with itunes
ayo what is up with palera1n, i've read that it now supports iPadOS 17.7 ???
for the ipad 7 only
well ipad 6 too ig that got 17.7
!t palera1nupdate
palera1n has received updates to support both iPadOS 17 and 18, however this comes with some misconceptions. palera1n is different from app-based jailbreaks such as Taurine, unc0ver, Dopamine, etc, as it uses the checkm8 bootROM exploit. In simple terms, this means that the exploit targets the read-only low level hardware of the phone, meaning it is completely unfixable by Apple, and can only be fixed by releasing newer devices.
However, this also means palera1n will only ever support older devices on 17+, namely A10X iPads and older (as there are no checkm8-supported iPhones that received iOS 17 or newer). Compatibility for iPadOS 17+ is limited to the following devices:
- iPad 6th Gen
- iPad 7th Gen (17 & 18)
- iPad Pro 10.5 inch
- iPad Pro 12.9 inch 2nd Gen
Ip XR ios 16.5.1 A12 can jailbreak rootfull?
no
Can Cydia be downloaded on a rootless jailbreak?
no, is there a reason you want cydia
I want to install âanywhere!â in cydia
Derootifier is a tool that allows you to convert rootful (iphoneos-arm) debs to rootless (iphoneos-arm64). This is especially helpful for tweaks such as rootful themes or tweaks that don't touch the filesystem.
To obtain a rootful .deb, you can add a repository to PostBox by downloading the PostBox .ipa and adding a rootful repository. Once the repository is added and repositories are refreshed, search for the tweak and press 'Download .deb file'.
To use Derootifier, install the Derootifier .ipa WITH TROLLSTORE, open the .deb file downloaded from PostBox from the file picker, and press convert. If Filza (with a URL scheme) is installed, it will open Filza. If not, check /var/mobile/.Derootifier for the arm64 .deb. Share the .deb to your package manager and install.
Derootifier will not work without proper dependencies. The dependencies are as follows:
- file
- fakeroot
- odcctools
- ldid
These packages are all available through Procursus. If you cannot findldid, search with an L instead of an i.
If a repository gives an error about not being logged in, ensure you are logged in to the corresponding repositories login page. If the repository gives an error saying unsupported browser / package manager, you may need to spoof the user agent to be that of a package manager.
yes
Thx for your help,
Oh đŠ thatâs a bad new for me ..
Is there a way to avoid loosing the tweaks etc.. ?
make screenshot of them and then reinstall them on palera1n but take in mind most of tweaks from iOS 14 will not work on iOS 16 due to iOS 16 needs rootless
palera1n does not working for ios 16.7.10 (iphone x)
anyone else faced issue ? The exploit completes successfully but when mobile boots its not jailbroken
because you have a passcode set / only removed it and didn't erase the device as you were told
hmm. I had removed the password already but let me try by erasing the device
yeah it worked
Thanks
I'm new to jailbreak
Using palera1n on iphone X with 16.7 ios version.
After jailbroke is it way to install unsupported apps? For example: netflix
Someone can tell me pls
you can download older version
Unsupported as in requires newer iOS or newer device?
I think so because netflix requires iOS 17
Well I guess older app version
yes but they have to download latest version on other device
to be able to download older version on iOS 16 device
and it still might not work
if the app says it need to be updated even after downloading older version
so then I would use [[3dappversionspoofer]]
How
@vital apex @oak escarp Substitute on palera1n đ
What guide did you follow
It does not work like that
You cannot use substitute
also you should not be using rootful
!t whyrootless
Why rootless > rootful:
- There isn't any storage penalty (such as the 2-5 GB bindfs or 10GB+ fakefs storage penalty) compared to stock iOS
- Most future development of both tweaks and palera1n will primarily be rootless
- In general, rootful tends to have more and harder to troubleshoot issues in comparison to rootless
Yes, tweak compatibility for older tweaks may be better than rootless, but many older tweaks can be patched in various ways to work with a rootless setup.
I know
But had to test something
So now to remove rootful first add force revert then clean fake fs?
Guide to removing palera1n
Got it thanks
<@&355174844205367317>
So this is like a new kernel exploit or what? How did they get iPad is 17.7.3?
Or has it always been like that
There are a few checkm8 iPads that support iOS 17
so they get palera1n support
!t palera1nupdate
Hey @fervent galleon, have a look at this!
palera1n has received updates to support both iPadOS 17 and 18, however this comes with some misconceptions. palera1n is different from app-based jailbreaks such as Taurine, unc0ver, Dopamine, etc, as it uses the checkm8 bootROM exploit. In simple terms, this means that the exploit targets the read-only low level hardware of the phone, meaning it is completely unfixable by Apple, and can only be fixed by releasing newer devices.
However, this also means palera1n will only ever support older devices on 17+, namely A10X iPads and older (as there are no checkm8-supported iPhones that received iOS 17 or newer). Compatibility for iPadOS 17+ is limited to the following devices:
- iPad 6th Gen
- iPad 7th Gen (17 & 18)
- iPad Pro 10.5 inch
- iPad Pro 12.9 inch 2nd Gen
palen1x allows you to use palera1n-c on Windows computers via live-booting. You will need a USB flash drive or SD card for this.
Is the ipadOS 17.6.1 on palera1n still accurate, my ipad updated to 17.7.3 for some reason while it is a A10 chipset
Like would the jailbreak work or not
it'll still work if u use the latest version of palera1n
So if my ipad is up to date with ios palera1n still works?
palera1n has received updates to support both iPadOS 17 and 18, however this comes with some misconceptions. palera1n is different from app-based jailbreaks such as Taurine, unc0ver, Dopamine, etc, as it uses the checkm8 bootROM exploit. In simple terms, this means that the exploit targets the read-only low level hardware of the phone, meaning it is completely unfixable by Apple, and can only be fixed by releasing newer devices.
However, this also means palera1n will only ever support older devices on 17+, namely A10X iPads and older (as there are no checkm8-supported iPhones that received iOS 17 or newer). Compatibility for iPadOS 17+ is limited to the following devices:
- iPad 6th Gen
- iPad 7th Gen (17 & 18)
- iPad Pro 10.5 inch
- iPad Pro 12.9 inch 2nd Gen
Ipad pro 2017 10.5 inch
it'll still work
Yea thatâs good right
just update palera1n to the latest
Alright thanks man
then jb
np
Ye um sorry for shitty comment but Iâm not sure on who to trust since people have very different opinions.
So can palera1n jailbreak an XR running 18.2
No
đŠ
palera1n will never work on any device newer than the iphone x or ipad 7
Ye jailbreak for 18.2 on my iPhone will come after my phone has deteriorated by time
A8 - A11 I believe
Latest iPhone is X
For palera1n
Why can we use this on the iPad for iOS 17-18 but it doesnât work on the iPhone
iPhone 15 pro max 17.1.1
because it uses an unpatchable exploit only available on certain devices
The checkm8 exploit is a BootROM exploit with a CVE ID of CVE-2019-8900 used to run unsigned code on iOS, iPadOS, tvOS, watchOS, bridgeOS, audioOS, and Haywire devices with processors between an A5 and an A11, a S1P and a S3, a S5L8747, and a T2 (and thereby jailbreak it). Jailbreaks based on checkm8 are semi-tethered jailbreaks as the exploit w...
Because the exploit palera1n uses only works on A11 and below and there are no A11 and below iphones that support 17 but there are A10/A10X ipads that support 17
Awesome TYYYY
Quick question, so once I've jailbroken my iPhone X using Palera1n and have anything, will I be able to then add a passcode, as I couldn't before doing it because it wouldn't work
(i think i put this in the right spot)
The password has to be kept off due to SEP
you can use Checkl0ck to get around it though, just be aware that checkl0ck only works while jailbroken. So if someone reboots your phone they have full access to it.
No problem, if you have any more questions feel free to ask.
@delicate notch or if you dont want to pay for checkl0ck just use fakepass, itâs pretty much the same thing as checkl0ck without biometric auth
it should be in the palera1n repo by default i thimk
Hello guys I have a question about the -d flag. When used it hangs at Skipping demoted... also shown in the picture.
why are you using the -d flag
"Set the effective production fuse to 0, so as to enable hardware debugging features."
yes wanted to try some apple internal ,,featuresâ/bootarguments
70% sure it doesn't work like that, regardless, do you have two or more devices plugged in?
Had to do more unplugging and ctrl câs this time. Weird.
Only had to do it once with last version of palerain
itâs random for me
a usb stick, shouldnât interfere with it ig
does it work on SE 2020?
no
Hi! I used palera1n to jailbreak my device (iPhone 8, A11, iOS 16.7.10) and the first and only app i'm interested crashes instantly when I open it (I downloaded it from the App Store). At first I thought it was due to jailbreak detection, but the behavior doesn't change even using choicy, shadow, etc. Does anyone have any idea what might be causing this?
extremely strong jb detection, choicy and shadow dont always work
dont think there's anything you can do
hey all - wondering if anyone has looked into artifacts left behind by palera1n on force revert?
i'm testing an application with jailbreak detection and have noticed it continues to crash after revert
using idevicebackup2 afterwards shows Sileo and com.samiiau.loader references in few files, I'm assuming applicationState.db is the one triggering the jailbreak detection:
Library/Databases/CellularUsage.db
Library/UserNotifications/Library.plist
Library/FrontBoard/applicationState.db
Library/Preferences/com.apple.dasd.dock.persistence.plist
Library/SpringBoard/DesiredIconState.plist
Dopamine and palera1n are the only way possible?
what ios is ur se 2020 on
Yo guys which iPhone and version is best for mobile app pentest. I want setup my lab but iPhone 7 is most app dosnt work because of version is last 15.8
frida works on ios 15 rootless
that's still probably gonna be your best bet especially with an iphone 7
an iphone x on ios 16 might be fine but you're limited to palera1n and no SEP features if you're on the latest ios 16
So what about sll pinning
U could inject frida into sideloaded apps directly too tough right?
works great on ipad7 with ios18
Hey, I stuck on screen after I boot to palen1x, same thing happens each mode. x64 version iso, what can I do?
Nvm, previous version works just fine
factory reset
you can restore a backup of your data afterwards, just dont set up with a passcode
does WSL work as linux here (unfortunately i do not have any macs)
Hi guys, is removal of passcode needed on iPad Pro 10.5 with A10X chip?
No
no, it's only needed on A11 devices (iPhone 8/Plus/iPhone X)
I was wondering. I was trying to install using sideloadly few apps, every time I tried the app just crashes on startup. Looked through countless threads on this and no simple fix.
Does this also happen on jailbroken os?
Also after installing an app while in jailbroken state, will those apps work when it reboots to the unjailbroken state?
What are your experiences on this
are you on 17.0.1/16.7+?
17.7.X (I think 17.7.3 or 17.7.4)
it depends how you install those apps, if you install them with trollstore lite or appsync they wont work unjailbroken, if you install them with something like sideloadly/with a cert they'll work both in a jailbroken state and in a normal state
I see, should sideloadly with apple id sign be enough? I was already using this method but found no app that has been sideloaded to actually work, only when I enabled spoof in advanced settings it worked for a few seconds and again crashed. Is that common?
i've never ever heard of that issue happening but yes an appleid would be enough BUT the issue with sideloadly is that you need to refresh apps every 7 days, you're limited to 10 app ids, and you can only have 3 sideloaded apps, with trollstore lite they're permasigned and you dont have those restrictions + you have arbitrary entitlements but it doesnt work unjailbroken so
you could try out ts lite and see if those apps you're talking about work or not
I see, TS Lite? Never heard of that. And so with palera1n, you'd need commonly to jailbreak your iPad each reboot right using a computer.
yup
And what's TS Lite? Couldn't find it on the web.
oh, trollstore, I get it now
yup, but doesnt work unjailbroken
thats pretty much what it is
Oh, I've looked at compatibility and it goes only up to 17.6.1 (I'm on 17.7.X), would that be a problem?
no
it works on 17.7.x as well the havoc page just hasn't been updated
Hi guys, I'm currently doing the install of palera1n. I'm experiencing problems as the device doesn't go automatically into download mode after DFU. what could I be doing wrong?
@silent anchor
try plugging and unplugging it when you see checkmate
and for how long should I be holding the home button? when I get DFU connected can I stop holding the home button?
yes
okay I see. I'll try.
Nope, still got the same output, timed out. the iPad shows apple logo after DFU mode disconnected (after I unplugged it and plugged back in) and restarts.
Am I doing something wrong?
This is the setup.
maybe its the usb hub
I'll try some more. Don't know the reason.
Strange even after unplugging and plugging in still proceeds to do this.
I think I need to get USB-C to USB-A adapter and not use the hub. I'll try again after that.
USB-c cables wonât let the device go into download mode it just restarts the device. Need to use usb-a cable. At least for me that worked.
I see, I have USB-A to Lightning Cable.
The problem is my Mac only has USB-C connectors.
So I wanted to use an adapter for the USB-A cable.
Thus USB-A to USB-C adapter
Like this one
What do you think of this approach? Or should I use a Linux computer that has USB-A ports
WORKED!
Where is the page that i can look its my phone comfortobale?
A complete iOS modding guide, from stock to jailbroken.
But i want know pelarain or dopamine
it depends on device
and iOS/iPadOS version
Than you
ye in your iOS 16 you probably can use at least one of the tools
your usb doesnt show up in windows?
I have palera1n on my device
I used to enable jailbreak via linux
After some my laptop got fried ( literally burnt to dust )
So i put a passcode on my phone thinking i wont get the chance again to enable it
Here i am now
can i re enable jailbreak without factory resting my phone ?
Or using another kind of jailbreak
what ios version are you on
more like i dont get how that relates to ventoy, nor do i undedrstnad where such "install" button is
what in the world have you downloaded
i have no idea how you got there, the guide links the ventoy zip file you have to download
16.3
Just use Dopamine instead?
Guide to installing Dopamine using TrollStore
Anyone know good ipa apps like fb+ or where I can download ipas
!t piracy
Hey @blissful nimbus, have a look at this!
What is piracy?
Piracy is a form of unauthorized redistribution such as getting apps, in-app purchases, tweaks or themes without paying for them. This is often also unsafe as you are not getting things from the official source and pirated versions could have malware. This includes getting IPA files for free apps.
How do I know if I have piracy?
If you are not sure if a repo is piracy or not, you can send the name of the repo in to a genius, mod or admin in a DM and ask for further information. If you send a piracy link in a channel you will be filtered and informed further via DM. Doing so may also result in a warning from a member of staff. Use DMs to avoid the possibility.
Do note however that sharing piracy in DMs for any other purpose than asking if it's safe is still a violation of the rules and is warnable.
I have piracy repos and/or pirated tweaks, what should I do?
The standard procedure here is to remove jailbreak (also known as "restore rootfs" on older jailbreaks). To learn more, type /tag rootfs (or /tag legacyrootfs for older jailbreaks).
tweaked app is different tho

no itâs not
This discord does not support or tolerate any form of piracy. If you discuss, support, link, post screenshots, or talk in voice chats about piracy, you will be warned and eventually banned.
We consider the following as piracy.
âą Piracy repos
âą Programs that are used for pirating tweaks
âą Sharing of .deb files
âą Getting anything that costs money for free (in-app purchases, apps, tweaks, etc.)
âą Media Downloading\Streaming (music, movies, etc.)
âą Installing re-distributed free, paid, removed, and banned apps
âą Mirror links, unless the mirror is provided by the original developer
âą Cases of fraud, such as tools or instructions for obtaining real-life paid objects for free
âą Posting or advertising products or services that are in violation of the trademarks of others
If you have questions, feel free to ask a moderator
The latest palera1n or palen1x version seems to have issues with my iPad Air 2. Im getting a lot of errors about packets before one gets accepted. When booting PongoOS, it crashes. The iPad Air 2 is on iPadOS 15.8.3 and only seems to have this issue with the latest build. Trying an older build worked.
I cannot say for certain if this is a me issue or not cause my flash drive is about to die (thanks Intenso, thats the second one that died in less than a year). Would love if someone can confirm this or proof that my flash drive is just broken
However, jailbreaking my iPad Pro 12.9-inch 2nd Gen worked first try with the same flash drive
why are you not using dopamine
!t guide
I prefer palera1n as it works way more stable for me
I use rootless
Types of jailbreaks:
Tethered
The device must be booted using a computer every time, otherwise it won't boot at all. This type of jailbreak is uncommon. (e.g.: redsn0w, 4039)
Semi-tethered
The device must be jailbroken using a computer every time it's rebooted, otherwise it will boot in unjailbroken state. (e.g.: checkra1n, palera1n)
Semi-untethered
The device must be jailbroken using an app every time it's rebooted, otherwise it will boot in unjailbroken state. A computer is usually used for the initial installation, but it's not strictly necessary. (e.g.: unc0ver, Odyssey, Taurine, Dopamine)
Untethered
The device will stay jailbroken after a reboot, no additional action is required. This type of jailbreak is uncommon. (e.g.: Pangu9, Fugu14)
just saying
I know about that. I honestly dont care that I have to boot into recovery and use a PC. I prefer having one JB method for multiple of my devices than having different one for each devices. That way I can quickly swap the device that I want to JB
Palera1n allows me to JB 7 of my iDevices (5 iPads, 2 iPhones)
whats stopping u from just using the older version that worked fine for u?
Technically nothing. Just have to reboot to the newer one if I wanna JB my 2017 iPad Pro on 17.7.3. Just a minor inconvenience
maybe try the older again just to rule out the flash drive thing then
For the Air 2 Im assuming
yeah
Managed to boot into the new one (oopsies) and this time it worked. However I still got some errors regarding packets
Kinda weird since it failed 2 times in a row on the Air 2 but worked perfectly first try on my 2017 Pro
And the packets error only show up on the new build and on the Air 2
the A8X chip has troubles with palera1n
nothing you can do
I mean, it works now I guess. I should use a different flash drive at some point
I have about 8GB unallocated storage on my laptop ssd. I wish I could install ventoy there but it wants to wipe the entire drive
Also, just read your bio and wanted to ask what is Fugu18?
Yeah, kinda figured after reading the Github
so regram and tweak like facebook no ads and stuff is bad :(?
tweaks are fine
prepatched ipas are not
Wrong channel
my fault
Download mode timeout might need timing
no but itâs rootful so idk what to do
Why rootless > rootful:
- There isn't any storage penalty (such as the 2-5 GB bindfs or 10GB+ fakefs storage penalty) compared to stock iOS
- Most future development of both tweaks and palera1n will primarily be rootless
- In general, rootful tends to have more and harder to troubleshoot issues in comparison to rootless
Yes, tweak compatibility for older tweaks may be better than rootless, but many older tweaks can be patched in various ways to work with a rootless setup.
rootless support all modern tweaks anyways
Rootless didnot work with brqramdsk
!t icloudbypass
Hey @errant heath, have a look at this!
Discussion of iCloud/Activation Lock/passcode/MDM (Mobile Device Management) bypass, asking how to do it, or posting about it is not allowed. No, it doesn't matter if the phone is yours or not. We will not help you with it. If you do own it, itâs recommended to use the links below.
If you forgot your Apple ID - Apple Support
If you forgot your Apple ID password - Apple Support
How to remove Activation Lock - Apple Support
If you forgot the passcode on your iPhone, or your iPhone is disabled - Apple Support
Ok
thatâs also an ancient version of palera1n in newer version rootful donât get stuck like that without the fakefs
bro is helping someone that wants to icloud bypass 
crazy
no thatâs just rootful in general
eyesore to see ancient palera1n versions
yeah
they probably got it from a shady site or old youtube guide too
i just reinstalled my jakbreak n its giving subtrate errors b4 i could install any tweaks again
assistance please
how to use palerain
Guide to installing palera1n
Is there a way to keep the palera1n JB after rebooting device? I've JB the phone successfully but its a pain having to redo the JB after a reboot. Ios 16.7.10 on windows?
Have iPad a9 16.7.7, got the download and check mate and booting pongoOS but when iPad reboots no app any suggestions?
no
which iPad is it
I got it figured out I just re ran it a couple times then it worked
The palerain screen wasn't popping up
Are there any good in-app purchase by passes that are working still?
!t piracy
Hey @shut depot, have a look at this!
What is piracy?
Piracy is a form of unauthorized redistribution such as getting apps, in-app purchases, tweaks or themes without paying for them. This is often also unsafe as you are not getting things from the official source and pirated versions could have malware. This includes getting IPA files for free apps.
How do I know if I have piracy?
If you are not sure if a repo is piracy or not, you can send the name of the repo in to a genius, mod or admin in a DM and ask for further information. If you send a piracy link in a channel you will be filtered and informed further via DM. Doing so may also result in a warning from a member of staff. Use DMs to avoid the possibility.
Do note however that sharing piracy in DMs for any other purpose than asking if it's safe is still a violation of the rules and is warnable.
I have piracy repos and/or pirated tweaks, what should I do?
The standard procedure here is to remove jailbreak (also known as "restore rootfs" on older jailbreaks). To learn more, type /tag rootfs (or /tag legacyrootfs for older jailbreaks).
why can't people read server rules đ
Hello
can someone please help with Filza file transfers from PC to iPad?
spit ur shit king
Use LocalSend app
Will booting from Ventoy make it boot from there all the time or just the once then I can restart laptop as normal?
Just once unless you modify the boot order
And even if you modify it you can just set it back to normal
Ah okay thank you đ
so I just got an iPad 7, and i'm looking through the list of tweaks that i usually use but they're either not updated or the repo can't connect for whatever reason on sileo
and for some reason snowboard forces safe mode when it tries to render the clock app icon on every rootless version available
and i sadly don't have a choice when it comes to trollstore because it came loaded with iPadOS 18.0.1
TrollStore Lite exist!
Is it a cellular ipad 7 by any chance
Hey I have a question, Iâm using an iPhone X with palera1n, and Iâm wondering since we canât use a passcode is there some sort of alternate way to locking your device?
Sorry if thatâs like a dumb question, Iâm kinda new to iOS jailbreaking⊠đ
There is a free option and a paid option, paid is called checkl0ck and allows for biometrics, the free one is called fakepass and only allows for passcode locking
I can install it with Sileo?
Yes, you just need to login to havoc/chariz if you want to use them on any device
Hmm alr, is havoc and chariz the only repo with oaid apps?
Also it only works while jailbroken
idk
If you reboot you lose the passcode until you jailbreak again
checkl0ck mfs when i volume up volume down power button their phone:
yea
Anyways thanks guys đđ
no, it's wifi only
@trim monolith is there any chance that if i boot palera1n in a vm ill not get UaF race?
Or if it happens ones that means no hope?
Cuz I tested it in the past and it give me a UaF race
If I tested it in another laptop it might work?
VM's (under Windows) generally won't work
another laptop should work though
I have 2 windows laptops
you can try palen1x on both
I tested a vm in a one and it didnât work
Do i have a hope in the another laptop?
palen1x allows you to use palera1n-c on Windows computers via live-booting. You will need a USB flash drive or SD card for this.
=/
No
I would have one either way in case Windows collapses on itself
(have had happen to me once, thank you Windows Update)
Idk
Like does it deserve a try
probably not
- this isn't the right channel
- any reason you aren't using Chimera by chance
Guide to installing Chimera
!t antivirus
- is your device trusted with the computer
- is Windows Security/Antivirus disabled (if it isn't, disable and redownload)
Hey @upper acorn, have a look at this!
Modern antiviruses will detect applications like TrollInstallerX or Dopamine as viruses/malware. They are only flagged due to the exploits used to install TrollStore or jailbreak.
Temporarily disable your antivirus if it is flagging the files needed for installing TrollStore and/or jailbreaking. It may also intervene with the sideloading process.
For Windows Defender, disabling real-time protection should be sufficient.
You should re-enable it after you jailbreak your phone.
!t delayota
DelayOTA is a process of upgrading to versions for up to 90 days after a new version is released. With Dahlia you can extend this period for a few more days.
DelayOTA is mainly used for companies to upgrade to versions more later than usual, these guides just help normal users achieve the same thing.
Note
- You cannot downgrade using DelayOTA
- You can find what DelayOTA versions are available here
- This won't work if you futurerestored with a SEP that's newer than the version you're trying to go to.
- This wonât work for betas!
just checking something
#bot-commands exists
Hey, I installed zebra and decided I donât want to use it, how can I remove it?
I have a usb c dongle to usb-b to connect my iPad with the old usb cable to my new MacBook Pro, but the terminal doesnât find my iPad.. can you help me ?
go to the packages tab, find zebra, then swipe left on the package and hit remove
in my testing vbox doesn't work at all on any usb controller, and vmware only works with usb 3.1 controllers (thank you @versed geyser for telling me this
)
you should definitely use palen1x on a usb over this if you can, palen1x is not designed to run in a vm.
if this doesn't work then you'll have to use palen1x
- Install vmware
-direct link (taken from update server)
-official download page (requires broadcom account) - open vmware workstation 17 player
- create a new virtual machine
- use the latest palen1x-x86_64 iso
- set the guest operating system to Linux -> Debian 12.x 64-bit
- the name and storage size don't matter
- before clicking finish, select customize hardware -> usb controller -> set it to 3.1 then click finish
(actually using the vm)
8. put device into dfu and unplug it
9. start vm
10. from the palen1x menu, choose shell
11. type palera1n -l and press enter
12. when you see "Waiting for devices", plug in the device
13. a pop up like the one below will appear, choose "Connect to a virtual machine", and optionally "Remember my choice" (so you wont have to repeat it in the future)
14. you will have to replug and repeat step 13 at "DFU mode device disconnected" and at "Booting PongoOS"
15. profit 
(also if there is no pop up at 13 ((and the vm doesnât detect the device after replug)) go to Player -> Removable Devices -> Apple Mobile Device/PongoOS USB Device -> Forget connection rules)
by "vbox doesn't work at all" i mean i also got the UaF race message repeating, i have tested both vbox and vmware with all usb controllers (10 times each) and only the above worked
I tried to download palera1n on an old mac and it wouldn't download. does it need to be on a certain OS to jailbreak my phone?
What version of macOS is your Mac running?
El Capitan 10.11.6 lol
That might be too old
So GitHub doesn't work?
just tried the website
download it from GitHub
thanks I'll try that
That worked thanks, so I downloaded and entered the sudo command into the terminal. How can I tell if it installed?
Thx ill try it now
Is it palera1n -L ?
yes but lowercase
Should i hit âshow all usb devicesâ
In the usb controller
pretty sure i didnât, you can change it after if it doesnât work
Ok. And should i put my device into dfu mode before starting the vm ?
yes
o7
skull
if you get that libusb error the first time you try either restart vm or ctrl + c, replug ipad, run palera1n -l again
Its even worse
@trim monolith
UaF race again đ
Can u Let me die @trim monolith
Even i cant enable jit too
C:\Windows\system32>SideJITServer
Traceback (most recent call last):
File "<frozen runpy>", line 198, in run_module_as_main
File "<frozen runpy>", line 88, in run_code
File "C:\Users\LENOVO\AppData\Local\Programs\Python\Python313\Scripts\SideJITServer.exe_main.py", line 4, in <module>
from SideJITServer.main import start_server
File "C:\Users\LENOVO\AppData\Local\Programs\Python\Python313\Lib\site-packages\SideJITServer_init.py", line 22, in <module>
from pymobiledevice3.tunneld import get_tunneld_devices, TUNNELD_DEFAULT_ADDRESS, TunneldRunner
ImportError: cannot import name 'get_tunneld_devices' from 'pymobiledevice3.tunneld' (C:\Users\LENOVO\AppData\Local\Programs\Python\Python313\Lib\site-packages\pymobiledevice3\tunneld_init_.py)
C:\Windows\system32>
This the error when installing was running SideJITServer
Then..
I uninstalled it
Then..
When im trying to install it againâŠ.
This happens
This the error
I NEED HELP OR ILL DIE
VMware sets the operating system automatically, you donât have to set it urself
.
but u have to do it for both DFU and PongoOS
for me it happens very randomly and it happened like weeks ago. I just unplug my device and restart the vm multiple times and it works
yeah you might have to do that
Also set USB Controllers to USB 3.1
I did and it still give me uaf race
Whatâs ur cpu
Intel shit
Hm, maybe you set up ur vm incorrectly anyway
just try to set it up again but donât select Debian, itâll select everything automatically
And then in settings do the usb controller things
I select debian when ot goves me uaf race
If I installed linux on a vm then i run palera1n from the linux terminal will it work?
no
? just redo the VM
iirc yes it gets stuck
It works for u or what?
palen1x works, but palera1n doesnât
On a vm?
yes
amd
Thats why it works fine to u
and on Linux it gives me uaf race
Idk bro
I donât see how it would if it doesnât work on Linux distros
Idk
Just can u send me a vid how exactly u setup the vm and the idevice?
Video or steps
If youâre on AMD/Ryzen, you may be encountering a few issues when using checkra1n or palera1n. This can vary between freezes and straight up crashes. Itâs because of AMDâs weird drivers that cause it not to work that well with checkra1nâs/palera1n's exploit. If youâre lucky you can actually successfully manage to jailbreak using checkra1n/palera1n.
Tips to increase successrate:
- Plug your device into your computer's motherboard.
- Use a genuine Apple USB-A to lighting cable.
If youâre stuck on the Apple logo please force reboot yourself (see: /tag reboot).
If these donât work, try to get your hands on another computer (preferably intel), and try to use checkra1n again.
u make a VM, u put palen1x iso there, then u just see continue continue whatever, then when it adds the VM, go into itâs settings, then go to USB controllers and put USB 3.1 and show all devices
then launch it
Ok
But it might be giving uaf race cuz of my charger or what
what do you use
If you use USBC to lightning then yeah
No
Its syncing cable so
Its usb A to lightning
I think Iâll search for usb drives
Cuz no hope
And i need to enable jit
Sidejitserver broke for no reason
This the error
C:\Windows\system32>SideJITServer
Traceback (most recent call last):
File "<frozen runpy>", line 198, in run_module_as_main
File "<frozen runpy>", line 88, in run_code
File "C:\Users\LENOVO\AppData\Local\Programs\Python\Python313\Scripts\SideJITServer.exe_main.py", line 4, in <module>
from SideJITServer.main import start_server
File "C:\Users\LENOVO\AppData\Local\Programs\Python\Python313\Lib\site-packages\SideJITServer_init.py", line 22, in <module>
from pymobiledevice3.tunneld import get_tunneld_devices, TUNNELD_DEFAULT_ADDRESS, TunneldRunner
ImportError: cannot import name 'get_tunneld_devices' from 'pymobiledevice3.tunneld' (C:\Users\LENOVO\AppData\Local\Programs\Python\Python313\Lib\site-packages\pymobiledevice3\tunneld_init_.py)
C:\Windows\system32>
Summon fix this please
@trim monolith im done im going to buy a 512mb usb drive is it okay
It need 4 days to arrive
Is 512mb usb drive can be bootable?
Or i need over 1gb
Too small I think
Its okay for palera1n booting
Also drives can be 32-64gb for cheap this is a scam
The iso file is jsut 20mb
Its 512mb
For 1.5$
On temu
Yeah usually itâs a minimum of 16gb
And itâd be around the same price
And ill pay cash so no worries
Idk i just wanna boot palera1n
I dont need alot of space
Can I see the listing?
khi nĂ o cĂł jailbreak ios 16.7.10 khĂŽng pc váșy
!t guide
Hey @random lichen, have a look at this!
!t nosep
When using checkra1n/palera1n on the iPhone 8/X running iOS 14 or later, you will not be able to use any of the following SEP features in a jailbroken state:
- Passcode
- Touch ID/Face ID
- Apple Pay
Additionally, if youâve ever enabled a Passcode on iOS 16 on the iPhone 8/X, youâll need to erase all content and settings in order to successfully jailbreak with palera1n.
can you check whatâs in task manager -> performance
I cant use my laptop rn what should be there
oh itâs a laptop
Yeah
Nah
yea wait for the usb
Okay =/
I might get one today or ill have to wait 4 or 5 day till the usb arrives
Is there a jailbreak for ipad 7 gen without a pc?
not on 16.7 and newer
Oh
Dudedude my palera1n uninstalled from my ipad whar happened
My sileo crashes on boot aswell
your device may have rebooted
you need to run palera1n again from a pc
what do you mean by that specificall
same as stock ios i guess?
On iOS you need to be an important person to be attacked with zero click exploit chains
Even if on old firmware
can you jailbreak iphone X ios 18,2?
no
what ios can you jailbreak on iphone x?
!t latest
Hey @primal thicket, have a look at this!
Latest released iOS versions that are able to be jailbroken
If your device is older than the ones listed here, it's jailbreakable on the newest version.
If your device is newer, it is unable to be jailbroken at all.
iPhones / iPods
iPhone 13 Series - 14 Series (A15 - A16) 16.5
iPhone SE 3 (A15) 16.5
iPhone XS/XR Series - 12 Series (A12 - A14) 16.5.1
iPhone SE 2 (A13) 16.5.1
iPhone 8(+), X (A11) 16.7.10
iPhone 6s(+), SE 1, 7(+) / iPod 7 (A9 - A10) 15.8.3
iPads
iPad Pro 6 / iPad Mini 6 (A15 / M2) 16.5
iPad 8 - 10 / iPad Pro 3 - 5 / iPad Air 3 - 5 / iPad Mini 5 (A12 - A14 / M1) 16.5.1
iPad 7 (A10) 18.2
iPad 6 / iPad Pro 2 (A10(X)) 17.7.3
iPad 5 / iPad Pro 1 (A9(X)) 16.7.10
iPad Air 2 / iPad Mini 4 (A8(X)) 15.8.3
Use the /canijailbreak command or the buttons below for more information.
no
How did you get an iPhone X to iOS 18?
Tethered downgrade :
If it's on iOS 18 it's not an X
It's an XS or XR
mb its an xs
Yeah no jailbreak or downgrade
ggwp
shut up
Why
because
Oh its xs
i'd like to know how on iphone 8 16.7.10
seprmvd64 by mineek
k
YOLO
JB ios 18.2
Jailbreak with palera1n and use trollstore lite
Guide to installing palera1n
iOS 18.3
no
Which palera1n version should I use on a quad core intel i7 iMac??
The latest version
Universal or 86_64?
Either one
Whatâs the difference?
Palera1n work on 9gen 17.2?
No
No
website isnt working
Jesus christ what version of macOS is that
đ
You cannot run palera1n on that version
You could probably use palen1x or some other modern Linux distro though
macos X lion
Yeah that is old as hell you're not gonna be able to run palera1n on that
shit
sorry i ate it
what MacBook Air even is this
I canât jailbreak on ipadOS 18.2 iPad 7th gen keeps restarting after all the coding appears when it tryâs to jailbreak
what palera1n version are you using (can check through palera1n --version
shit old as fuck
ye
!t palen1x
palen1x allows you to use palera1n-c on Windows computers via live-booting. You will need a USB flash drive or SD card for this.
@glad stone use this
Please get that off the internet before it gets a virus omg
Someone know tweek which alow me remote iphone from pc ?
screen view + control
I have an iPhone X 16.7.1 with Rootless Palera1n
I am using Shadow but I keep getting Jailbreak detection on some apps including Snapchat (which locks the account). I am not tweaking it either. My friend has Dopamine 2 (Roothide) he is fine. Any ideas what I can do?
Don't inject anything into snapchat, even shadow.
Nothing you can do. Snapchat has crazy good jailbreak detection
Can anyone confirm if palera1n jailbreak works on ios18.0.1
are you on an iPad 7
iPhone 12
no you can't jailbreak, or downgrade to an older version
Ahh ok. The wait goes on. Thank you
Anyone that has a similar situation, I have a iPad (6th Gen) according to my understanding it has been jailbroken with palera1n and I then installed Pokémon GO but it crashes like everytime I click on it and this is without SpooferPro tweak. Anyone that can help with any solution?
disable tweak injection into the app
you need palera1n(roothide)
How do I do that? Would appreciate it
you install something like choicy
and toggle "turn off all tweaks"
Thanks!
How to get Roothide on Palera1n. I am already using rootless.
in dev 
đ
I shall wait @urban kindle
Thank you for your work.
in testing
Someone know Ghost/Universal spoofer ?
what
@quiet sedge 
whats your question about it
The day has come
I along with others don't know what that is
Haha
Installed it worked just curious if that does anything with the jailbreak? Like ipad should still stay jailbroken Right?
yes
Awesome thanks for the help!
Hi everyone, one question. I --force-revert my iPhone 8 with iOS 15.3.1, I'm updating to 16.7.10 via System Setting OTA and then rejailbreak using pelara1n v2.1-beta.1. Never set a passcode. Do you see any problem? đŹ
I mean I'd dump blobs, and I don't get why you're updating to 16.7.10 to begin with, but what you're asking about should be fine
Do you mean blobs for getting a newer version?
Settings said latest available version is 16.7.10, so for me itâs ok
no I mean blobs for 15.3.1
If you want to downgrade
You will need the blobs
So get them
!t blobs
Hey @sand fox, have a look at this!
How to use blobs (aka how to Future Restore)
If you're using a Procursus jailbreak your blobs are automatically saved weekly and can be found here or by running sudo shshd in a terminal.
Im trying to run palen1x on an iphone 8 ios 16.7.1
I get the palerain bootscreen but stuff like sileo etc dont appear after boot is there something im doing wrong? (Rootless jb chosen flags: -l)
do you have a passcode set
!t nosep
Hey @obsidian wadi, have a look at this!
When using checkra1n/palera1n on the iPhone 8/X running iOS 14 or later, you will not be able to use any of the following SEP features in a jailbroken state:
- Passcode
- Touch ID/Face ID
- Apple Pay
Additionally, if youâve ever enabled a Passcode on iOS 16 on the iPhone 8/X, youâll need to erase all content and settings in order to successfully jailbreak with palera1n.
read last sentence
On setup it forced me to set a pin tho
no it doesnt
guys is there any fix for my phone? its stuck in springboard for 4 houres now
!t reboot
Hey @finite pendant, have a look at this!
This will force reboot the device. For normal rebooting instructions, see the normalreboot tag.
iPhone 8 or newer (including all notched devices, iPhone SE 2020 and newer):
- Press and release volume up
- Press and release volume down
- Press and hold the side button for 10-20 seconds until the Apple logo appears
iPhone 7:
- Press and hold the volume down and power buttons for 10-20 seconds until the Apple logo appears
iPhone 6S/SE 2016/iPad 8th or older:
- Press and hold the home and power buttons for 10-20 seconds until the Apple logo appears
tried not work
display is not responding?
but can you go to settings to turn off device?
i cant it suck in loob in springboard
idk how to reboot other way when volume button is not working
hmmmmmm ty for replay. i will try let the bettrey dry
That is a solution too
Hey does anyone know how I can find a tweak that is making most of my apps crash or why would that be? Iâm on a iPhone 7 15.8.3 palera1n root.
dont use rootful
just use dopamine
Why dopamine and root doesnât work?
Dopamine is not a rootful jailbreak
a rootful jailbreak is not needed and is not recommended on iOS 15 and later
I know
Itâs rootless
ok Iâm confused
My first question was why are my apps crashing on palera1n root then @cosmic niche said use dopamine instead then I asked why dopamine and then in the same sentence I asked does root not work not tryna be a asshole explaining lol but yeah
Elaborate
!t rootlogin if thatâs what youâre trying to do
PSA: Logging in as root
Logging in as root is no longer supported. Nor is it recommended. Instead you can use the mobile user and run commands with sudo which will run them as root. You should have set your sudo password when jailbreak for the first time. If you do not remember setting a password, default passwords may be alpine or 0000.
Sudo is a better practice than root login.
if you desperately need root shell because you cope hard, sudo -i -u root
I just did
^
Rootless means you cannot write to the root filesystem, only leaving /var and /private/preboot being writable. Semi-untethered jailbreaks such as Fugu15/Dopamine must be rootless while semi-tethered jailbreaks can simulate a rootful installation by creating a clone of the existing root filesystem. Current semi-tethered jailbreaks such as palera1n have the option to be rootless anyway.
What does this mean for the average user?
Tweaks would need to be updated to support iOS 15, check if the tweak youâre installing works on 15. Not all tweaks will work out of the box for iOS 15.
Might help a bit
What is the best way to install TrollStore on a jailbroken iPad Mini 4 running iOS 15.8.3 with Palera1n environment?
Install TrollStore Helper from Havoc
Thankyou!
Hi guys, Iâve been stuck on this since last night, could someone help me with commands plz, Iâm so sorry for noob question đ thank you guys
Is it an Apple TV or an iPhone/ipad
Their issue was resolved in #jailbreak
did you previously have a passcode set?
No bro
ever?
I deactivated it before JB process
thatâs not enough
Oh yes
When using checkra1n/palera1n on the iPhone 8/X running iOS 14 or later, you will not be able to use any of the following SEP features in a jailbroken state:
- Passcode
- Touch ID/Face ID
- Apple Pay
Additionally, if youâve ever enabled a Passcode on iOS 16 on the iPhone 8/X, youâll need to erase all content and settings in order to successfully jailbreak with palera1n.
yes
yes
I got you bro, thank you to all that gave there time to me I appreciate yous all much luv, be safe
Probably see yous soon đ
@solemn verge do I jailbreak straight away when factory reset is done bro?
go through setup first
donât set a passcode
Oh yes that was my next question Ty bro đŻ
keep in mind that if you ever set a passcode again, you have to erase again
I gotchu bro đđŻ
@solemn verge done thank you bro đŻđ
might be a faulty USB stick?
Isnât it better to simply boot off of a partition
maybe a partition on the usb
I keep getting Whoops, device did not enter DFU mode, anyway what I do, I have already reset iphone, IOS 16.7.10
Are you using a USB-C to lightning cable
!t usbcmoment
Hey @fallow oar, have a look at this!
Can 17.3.1 jailbreak?
palera1n has received updates to support both iPadOS 17 and 18, however this comes with some misconceptions. palera1n is different from app-based jailbreaks such as Taurine, unc0ver, Dopamine, etc, as it uses the checkm8 bootROM exploit. In simple terms, this means that the exploit targets the read-only low level hardware of the phone, meaning it is completely unfixable by Apple, and can only be fixed by releasing newer devices.
However, this also means palera1n will only ever support older devices on 17+, namely A10X iPads and older (as there are no checkm8-supported iPhones that received iOS 17 or newer). Compatibility for iPadOS 17+ is limited to the following devices:
- iPad 6th Gen
- iPad 7th Gen (17 & 18)
- iPad Pro 10.5 inch
- iPad Pro 12.9 inch 2nd Gen
most of apps dosnt work under 16 version how we can solve the issue?
by grooming the under 16 apps
jailbreaking with palera1n, rootless, iphone 8 on 16.7 i get this at the first step
<Error>: Device is not in normal mode: -21 (Invalid HostID)
This will force reboot the device. For normal rebooting instructions, see the normalreboot tag.
iPhone 8 or newer (including all notched devices, iPhone SE 2020 and newer):
- Press and release volume up
- Press and release volume down
- Press and hold the side button for 10-20 seconds until the Apple logo appears
iPhone 7:
- Press and hold the volume down and power buttons for 10-20 seconds until the Apple logo appears
iPhone 6S/SE 2016/iPad 8th or older:
- Press and hold the home and power buttons for 10-20 seconds until the Apple logo appears
Follow the steps for your device except hold the power button until the recovery menu shows up
ok
With what
i had palera1n on iphone 7plus and i forgot to put the phone on charge so i losst the jailbreak. now i tried to rejailbreke it and my phone is stucked with the palera1n logo
This will force reboot the device. For normal rebooting instructions, see the normalreboot tag.
iPhone 8 or newer (including all notched devices, iPhone SE 2020 and newer):
- Press and release volume up
- Press and release volume down
- Press and hold the side button for 10-20 seconds until the Apple logo appears
iPhone 7:
- Press and hold the volume down and power buttons for 10-20 seconds until the Apple logo appears
iPhone 6S/SE 2016/iPad 8th or older:
- Press and hold the home and power buttons for 10-20 seconds until the Apple logo appears
thanks
@vital apex so i am still stuck on palera1n, at the same step. if i run the palera1n -l command with my phone connected, i get that error i wrote earlier. "device is not in normal mode -21 (invalid hostid)" then if i try to put iphone in DFU mode, the palera1n process gives me the instructions to put it in DFU mode. and subsequently kicks the phone out of DFU mode into normal mode. i even tried putting it in DFU mode before running the command but same thing kicked into normal nonDFU mode
if it's not staying in DFU mode you aren't holding the buttons for the right amount of time
it stays in DFU mode if i put it in and im not running the palera1n command
so i'm doing it right afaik
yes
i did. one is a syncwire (a better branded nonapple one) and one is an official apple lightning cable
the thing is on the palera1n website instructions, it says to follow the instructions which will put the phone into DFU mode
but i just get that error instead of being asked to put in to DFU
i have to get to bed, ill check back for replies in the morning
What device and ios
Nvm
Try reinstalling palera1n maybe, thatâs all i can think of
boot to recovery first then enter DFU mode
don't instantly go to DFU mode
how do you reinstall
or uninstall
i just re-used the original code which installed it in the first place
ok ok ok i found the problem. apparently i needed to have the phone unlocked and on the home screen for it to start. worked first time, i am now jailbroken again for the first time in over two years
great
also
!t nosep
Hey @violet crane, have a look at this!
When using checkra1n/palera1n on the iPhone 8/X running iOS 14 or later, you will not be able to use any of the following SEP features in a jailbroken state:
- Passcode
- Touch ID/Face ID
- Apple Pay
Additionally, if youâve ever enabled a Passcode on iOS 16 on the iPhone 8/X, youâll need to erase all content and settings in order to successfully jailbreak with palera1n.
thanks good to know, as i did not know any of that
!t help
Can I jailbreak iPhone XS with Pelar1n on IOS 17.5 ?
no
yes X but no XS
oh
đ
I forgot bc the iPad pro 10.5 inch is a10x and has 17+
how do i add it to my ipad, ive downloaded via terminal
!t guide
Hey @verbal quiver, have a look at this!
my ipad is going in and out of restore and i cant restore it 
hey, is it possible to jailbreak without a mac?
depends on device and iOS version
ip8 ios version: 16.7.2
you can use linux too
i can install on virtual machine?
not likely to work properly
hello, my old iphone8 was successfully jailbroken and working fine for some time, however i left it for a while and the battery completely died, as well as it fell off a table. and now its mad at me adn stuck in recovery mode. i tried palera1n to exit recovery but it just reboots back into recovery. is there a way to use the mac finder "restore" option without it upgrading the os on me?
it says it doesn't work properly in vms iirc
A complete iOS modding guide, from stock to jailbroken.
I may be wrong
if you have a usb, use a usb
wym
she's saying that if you have a USB you should use that over dealing with the VM
why is rootless the recommended?
!t whyrootless
Hey @steel cedar, have a look at this!
Why rootless > rootful:
- There isn't any storage penalty (such as the 2-5 GB bindfs or 10GB+ fakefs storage penalty) compared to stock iOS
- Most future development of both tweaks and palera1n will primarily be rootless
- In general, rootful tends to have more and harder to troubleshoot issues in comparison to rootless
Yes, tweak compatibility for older tweaks may be better than rootless, but many older tweaks can be patched in various ways to work with a rootless setup.
Basically it comes down to it isn't a pain to setup, less issues to deal with, no storage penalty, and most tweaks support rootless
dont you need root for accessing the whole filesystem? im new to iOS
Yes, rootless can only access /var/ and a folder I forgot
all user files (and a lot of system ones) are in /var/
yeah, the root folder is mostly for boot files and a few other system components
good to know ty
no problem
Iâm having a issue with jailbreak on my iPhone 8 Plus on ios 16.7.10 using win it does the jailbreak successfully but I donât see the loader for Sileo or zebra
Iâve tried to respring but no palerain loader
First, don't use that unofficial palera1n for Windows, it's filtered for a reason (use palen1x).
That sometimes happens, you can use this shortcut to open palera1n loader: https://www.icloud.com/shortcuts/8cd5f489c8854ee0ab9ee38f2e62f87d
Okay so Iâve seen videos about palen1x I just donât understand stand the whole booting into the bios in some cases they are saying to unlock the bitlocker for it to boot into a different bios and some videos donât say I have too lol and Iâve tried using a micro mad card with 16g to copy the iso to the sd card but then my laptop starts saying it canât read the sd card anymore so im like wtf đ
Most computers don't support booting off a SD card
Idk if after I flash the iso to sd card the computer isnât technically suppose to read the sd card anymore from there on I process with the boot?
I used a Samsung laptop
doesn't really matter, usb booting is widely supported and is the most reliable
Okay Iâll def give it another shot thx đ
No problem
Actually thatâs not even an advantage as you still canât access the rootfs even with rootful, palera1nâs rootful just creates a fake rootfs in order to run rootful tweaks
Rootless exists because you canât modify the roofs no matter what you do
It probably might work
I donât see why your laptop wonât read the sd card during boot, of course Iâve never seen anyone boot of an sd card and it might probably have some issues with a normal Linux distro but if it works with palen1x it will probably be fine
Ipad OS seems to keep supporting palera1n, nice! I hope it stays like this for a while
Its a pretty nice jailbreak lol
will always remain that way for the ipad 7 since it has an unpatchable hardware exploit
Roothide doesnt support palera1n rootless?
Is there any jb bypass recommended for palera1n rn?
vnodebypas, choicy, shadow
vnodebypass not supported for 16.7.10, since dopamine cant be used there
anyone had a problem with payment providers not coming up in sileo? kind of urgent ngl
pay over the site
buy like that
problem solved
ok, but when coming to downloading even free packages it wont let me :/
.
did you log into your account
in sileo
top right corner should be the option
yeah it actually doesnt give me the option to do so which is really weird. it worked fine in rootless but i need crane :/
crane works on rootless brother
no clue what you mean
said crane is no longer supported on rootless as it's "outdated"
i'll try to restore iphone and use rootless
What
Take a screenshot and send it here
will do
Of whatever is saying that
so this was done through rootful, couldnt access a single package
im just reverting now
yeah I mean I bought crane through rootless first but then the app didnt download onto the phone
Did you know the guy who created crane also created dopamine?
Why would he make a tweak rootful when his own jailbreak is rootless
ok so ive now installed crane but the app button isnt showing up
i did not...
downloaded crane, icon is not showing up on phone after restarting springboard. is there a tweak i need to know?
there's no app
for crane
you're confusing something
it's going to appear in settings
ah i seeeeeeeeeee
check settings and scroll down
yupppp i found it
youre a legend đ
is it safe to add my own icloud to add instagram and stuff yeah?
is there a guide you follow to using crane btw?
no
Does this include the 10.5 inch ipad pro as well? I see that one keeps getting supported
I donât think that supports iOS 18
But palera1n should work with it on 17
What do you mean?
17.7.3 seems to be the latest for iPad OS
hey guys, can put JB in a iphone 11 with ios version 17.6.1?
no
unplug and replug it after you get that
try again
ok
and make sure the device is unlocked when you plug it in
as in for the first time when you start it first
now its stuck here
and the screen i off
ok
30 mins done still same, does it usually take this much time?
what is latest iphone that i can jb or ios?
!t latest
Hey @lilac blade, have a look at this!
Latest released iOS versions that are able to be jailbroken
If your device is older than the ones listed here, it's jailbreakable on the newest version.
If your device is newer, it is unable to be jailbroken at all.
iPhones / iPods
iPhone 13 Series - 14 Series (A15 - A16) 16.5
iPhone SE 3 (A15) 16.5
iPhone XS/XR Series - 12 Series (A12 - A14) 16.5.1
iPhone SE 2 (A13) 16.5.1
iPhone 8(+), X (A11) 16.7.10
iPhone 6s(+), SE 1, 7(+) / iPod 7 (A9 - A10) 15.8.3
iPads
iPad Pro 6 / iPad Mini 6 (A15 / M2) 16.5
iPad 8 - 10 / iPad Pro 3 - 5 / iPad Air 3 - 5 / iPad Mini 5 (A12 - A14 / M1) 16.5.1
iPad 7 (A10) 18.2
iPad 6 / iPad Pro 2 (A10(X)) 17.7.3
iPad 5 / iPad Pro 1 (A9(X)) 16.7.10
iPad Air 2 / iPad Mini 4 (A8(X)) 15.8.3
Use the /canijailbreak command or the buttons below for more information.
mine is iphone 7 15.7.9
should i do again, no mine doesnt appeared like that my phone is off still
and the terminal says
about to execute chechkra1n
i unplugged it its not turning on now
if it's on black screen, then it's still on DFU mode likely
what to do now should i plug in back
ya
yes


