#palera1n
1 messages · Page 87 of 1
more specifically the screen freezes
it's weird
hold on
ill pull up an example
hm you're right
usually this is what happens when the wrong arch is selected in my experience
(not my actual laptop, just something i found)
and by my experience i mean my experience of helping people
welp
(mainly)
no amd error spam?
Nope
was this an AMD laptop by chance
what the hell
did you use motherboard USB ports
cause yeah plugging directly into the motherboard can also workaround it
uhh
ill try and see if i can get the grub error when using the correct iso
because i dont think this is the root cause
Ryzen 7 5800X
Does anyone know what to do if palera1n leaves your phone on the restore screen?
Uhhh u did it wrong
what is the "restore screen"
can u take a photo maybe
type palera1n -n
`~$ palera1n -n
== palera1n-c ==
Made by: Nick Chan, Ploosh, Samara, Nebula, staturnz, kok3shidoll
Thanks to: pythonplayer123, llsc12, Mineek, tihmstar, nikias
(libimobiledevice), checkra1n team (Siguza, axi0mx, littlelailo
et al.), Procursus Team (Hayden Seay, Cameron Katri, Keto et.al)
- [12/09/24 18:03:55] <Info>: Waiting for devices
`
Still nothing
is it plugged in
Ofc
This will force reboot the device. For normal rebooting instructions, see the normalreboot tag.
iPhone 8 or newer (including all notched devices, iPhone SE 2020 and newer):
- Press and release volume up
- Press and release volume down
- Press and hold the side button for 10-20 seconds until the Apple logo appears
iPhone 7:
- Press and hold the volume down and power buttons for 10-20 seconds until the Apple logo appears
iPhone 6S/SE 2016/iPad 8th or older:
- Press and hold the home and power buttons for 10-20 seconds until the Apple logo appears
try this
Right back to the restore screen, but was worth a shot
try sudo palera1n -n
you didnt read the supported devices properly
Oh
Exited recovery mode, thanks!
sucks to suck
fml
If I run sudo palera1n -n again will that have a better chance of working?
Or does the -n flag specify to get it out of recovery mode or something?
did it get out of recovery
Yes!
Very happy about that
Didn't brick the device
I'm gonna try it and hope it works
it just gets it out of recovery
Ah
it does nothing special besides that
Alrighty, got palera1n working. Thanks!
amazing also do /solved in your genius bar post https://discord.com/channels/349243932447604736/1315812428986056797
Thanks
so i’m attempting to jailbreak my ipad pro 1st gen with palera1n and it does this
it doesn’t progress past this
!t palera1nfix
If you encounter issues while trying to jailbreak using palera1n, here's a troubleshooting guide:
Common Issues:
- Error: status_exploit_timeout_error or timed out waiting for download mode
- This typically occurs during the device’s transition into DFU mode.
- Fix: When you see “Checkmate!” in the terminal, unplug your device and plug it back in.
- Error: LIBUSB_ERROR_ACCESS
- This is a permissions issue, often related to not using sudo or lacking proper permissions for USB access.
- Fix: Always run the command with sudo. For example:
sudo palera1n
If this issue still persists, make sure you have the necessary permissions to run palera1n.
- Running palera1n on Debian-Based Distros (e.g., ubuntu)
- There has been users reporting issues specifically on debian-based systems where palera1n fails to jailbreak you.
- Fix: Switch to palen1x.
If palera1n continues to fail:
- Download palen1x.
- Create a bootable USB with palen1x using a tool like Balena Etcher, Rufus, or Ventoy.
- Boot into palen1x and retry the jailbreak process.
Thank you to @frosty leaf for writing this tag.
Try unplugging and plugging back in the device
don’t cancel it
hey that worked actually
nice
ty
Yea I am with diff account
yeah bro what is ur ios
literally what palera1nfix tag is 😩
it doesnt matter
it wouldve said incompatible and couldnt get to that screen if it wasnt the right ios or right chip
nuh uh
iphone X to ios, is it possible to jailbreak?
the same for iphone 11? thanks
iphone x: yes
iphone 11: not with palera1n and only on older versions
if your iphone 11 is between ios 15 and 16 you can jailbreak it with dopamine
15*
15 to 16.5.1
woopsie
does the restore system button on the app remove the jailbreak fully? i wanna remove it but don’t wanna mess anything up
Have some one a link for sileo
Why
u cant install sileo from a link
or with an ipa

You can it's just cursed
and nothing works
i'm not talking about the demo version also
but it does work 😳
assuming it's the xina sileo ipa that works with xina a15
Palera1n rootless still getting detected somehow
why "somehow"
rootful and rootless have nothing to do with jb detection
anyways try choicy/shadow
oh I was thinking of something else
didn't even know xina used a sileo ipa
Can anyone help me fix this? Im using palera1n v1.1.8
beo read my message for the sake of god😭
Connect with normal mode
= 
Palera1n on 18.2 ? Only ipad 7 I'm guessing
Is it works for iPhone 14 Pro Max with 18.1.1
No
ip16pm 18.2 ios is jb real?
no
palera1n on iOS 18 only works on the iPad 7
Can somebody here possibly help me out???
I’m news to iPhones and yes!!! Everything i!’nn
with?
dont ask to ask
I
Forget how to do palerayn any help
windows?
Guide to installing palera1n
wait so I had palera installed on my iphone and it just suddenly went away???
Did you restart your phone
Nah but it prob died or sum, but I reinstalled palera, I think, how do I know its jailbroken again for sure? (sorry if this is a dumb question I Just dont wanna get cheat detected on the games I play)
Sileo is there
I had 2 reinstall it
also palerain u need to run again whenever u reset ur phone
ah alr, so if the palera app is there an dI can download sileo its jailbroken?
?
Im just tyrna make sure its jailbroken
so I dont get banned from the games I play
what do I need to see to make sure its jailbroken?
the palera app?
just making sure some error didn't happen when I was installing
cuz i wasn't looking
if you can open the sileo app you are jailbroken
so i installed palera1n on an iPhone 8 running 16.7.10 a while back, It died and i haven’t been wanting to reinstall palera1n, when i tried to reinstall it now, it finds the device, then puts it into recovery mode, then disconnects it. Leaving me stuck in recovery mode, I already had to reset the phone because of this.
bet
palera1n -n let's you exit recovery mode
i have ran that multiple times
it just says waiting for devices
Try running it with sudo
Im assuming this is linux right?
no pogo hacks, uber driver bypasses, downgrading or ios 18 jailbreaks,
uh huh
So does sudo palera1n -n do anything
only other device i have is a 2008 macbook on 10.5
what
i factory resetted my phone for NOTHING?????
Did u have a passcode set before
It has been jailbroken before
i resetted it because it wouldnt leave recovery mode
!t reboot this can also sometimes work
This will force reboot the device. For normal rebooting instructions, see the normalreboot tag.
iPhone 8 or newer (including all notched devices, iPhone SE 2020 and newer):
- Press and release volume up
- Press and release volume down
- Press and hold the side button for 10-20 seconds until the Apple logo appears
iPhone 7:
- Press and hold the volume down and power buttons for 10-20 seconds until the Apple logo appears
iPhone 6S/SE 2016/iPad 8th or older:
- Press and hold the home and power buttons for 10-20 seconds until the Apple logo appears
Then yeah u probably resetted it for no reason 😭
Me when auto-boot=false
that's why I said sometimes
Yeah true
jailbreaking my phone just for osu
nvm
uh huh
It’s not a ubuntu only issue i experienced it on fedora as well fyi
guess I'm adding a note that Ubuntu is known to not work
I'm doing most evaluated
its not normal
in this case Ubuntu is evaluated to not work
Yeah I understand i was just saying
It says “Device should now reconnect in download mode, DFU mode device disconnected” then throws the error
i really dont want to flash a palen1x image rn
you can keep trying to unplug+replug and control+c and rerun
but it probably won't work
i swear if its because im loaded in the downloads folder
palen1x or Ubuntu?
wait nvm
It's a known Checkra1n bug with certain distros. Does not work with latest Ubuntus. Works with Mint or just use fkin palen1x.
does somebody have a working tutorial on how to install Sileo ?
I suppose you need to make some shortcut iirc
You need to wait for someone else
all i done in this moment is to jailbreak it with palera1n , i think
Idk how that shortcut is being made
how can i check if it is jailbreak?
ok ok i understand
You should have Sileo working
Better said there should be palera1n app on homescreen
oh ok
i dont think there is one
let me check
nope there is none
so my phone is not jailbroken?
Then try to jb again
ok
Yes
Can you screenshot the tool you used to jailbreak maybe
i think i just bricked my phone
i was jailbreaking and procces stuck on "Entered initial checkm8 state after 100 steps"
!t reboot
Hey @fathom scaffold, have a look at this!
This will force reboot the device. For normal rebooting instructions, see the normalreboot tag.
iPhone 8 or newer (including all notched devices, iPhone SE 2020 and newer):
- Press and release volume up
- Press and release volume down
- Press and hold the side button for 10-20 seconds until the Apple logo appears
iPhone 7:
- Press and hold the volume down and power buttons for 10-20 seconds until the Apple logo appears
iPhone 6S/SE 2016/iPad 8th or older:
- Press and hold the home and power buttons for 10-20 seconds until the Apple logo appears
!t checkra1namd
Hey @fathom scaffold, have a look at this!
If you’re on AMD/Ryzen, you may be encountering a few issues when using checkra1n or palera1n. This can vary between freezes and straight up crashes. It’s because of AMD’s weird drivers that cause it not to work that well with checkra1n’s/palera1n's exploit. If you’re lucky you can actually successfully manage to jailbreak using checkra1n/palera1n.
Tips to increase successrate:
- Plug your device into your computer's motherboard.
- Use a genuine Apple USB-A to lighting cable.
If you’re stuck on the apple logo please force reboot yourself (see: /tag reboot).
If these don’t work, try to get your hands on another computer (preferably intel), and try to use checkra1n again.
i need to ctrl + c for that?
event not found
for that 2
what
what
Fym event not found
Follow the instructions
In the message
yes
im trying for 4th time alreadt but after booting nothing apears idk what am i doing wrong
What device and ios is this
iPhone 8 ios 16.7
nope
nothing happens
did you ever set passcode before jailbreaking?
i removed passcode before jaibreaking
you need to factory reset
yes
aagain nothing
there isnt any error while jaibreaking idk whats wrong
mb i need some args for jailbreaking?
it was saying -f -f -v

Do you even know what any of those mean
its -l run palera1n -l
Dont run anything else
Plssssss HEEEEEEEELP
how to activate dfu mode on iphone x? I do the + then at the same time the - and power on it just turns on there is nothing that happens
!t dfu also what cable are you using
Hey @viscid basalt, have a look at this!
DFU (Device Firmware Upgrade) mode is a mode which allows a device in any condition to be restored to a fresh version of iOS (not to be confused with Recovery Mode). This can also be used to jailbreak using checkra1n and palera1n!
For how to restore in DFU mode, see /tag dfurestore
Câble Lightning for iPhone X
what type of cable
Ok
is it usb-c or usb-a
Are you sure you're following the steps right?
I managed to enter the dfu 🥹🥳 but now there is another problem it asks me to press the + for a few seconds then release the bottom one for a few seconds it puts me in recovery
and now I can't get out of recovery anymore it asks to do the update and I don't want that
Do palera1n -n
it doesn't work and now when doing that it gives me errors
no but it's not possible I just removed the cable the phone turned back on thank you 🤣🤣🤣🤣
Can somebody tell me what I do after I unlock the contact on the checkra1n online jailbreak
It says protected contact unlocked
Boy doesn’t do anything
But
Whatever you're using is fake
Remove whatever profiles and stuff you used
What device and iOS version are you on
iPhone 12 running iOS 18.1
No shit’
Brother you literally just said "what I do after I unlock the contact on the checkra1n online jailbreak" we are just telling you because the message above implied that you did not know very much about jailbreaking (respectfully)
Literally
Ok
well on that device and version combo you cannot jailbreak
!t yt
YouTube is typically a very poor source of information and should be avoided. Many jailbreak YouTubers promote piracy, outdated tweaks, or just flat out fake jailbreaks. Reliable sources: iOS Guide, r/jailbreak Wiki, Apple Database and The Apple Wiki.
how can i cancel the update on my iphone 13?
go to ur storage and delete the update
it has an icloud
yeah so how can i stop
can u not access ur phone
i cannot
!t icloudbypass
Hey @idle nebula, have a look at this!
Discussion of iCloud/Activation Lock/passcode/MDM (Mobile Device Management) bypass, asking how to do it, or posting about it is not allowed. No, it doesn't matter if the phone is yours or not. We will not help you with it. If you do own it, it’s recommended to use the links below.
If you forgot your Apple ID - Apple Support
If you forgot your Apple ID password - Apple Support
How to remove Activation Lock - Apple Support
If you forgot the passcode on your iPhone, or your iPhone is disabled - Apple Support
i usec parla1n on ubuntu
from the tutorial on the official site
with sudo apt install etc all the stuff
i think about using palera1x
or factory reset it and after try again to jb
any advices on how should i action?
!t palera1nfix
Hey @gilded wasp, have a look at this!
If you encounter issues while trying to jailbreak using palera1n, here's a troubleshooting guide:
Common Issues:
- Error: status_exploit_timeout_error or timed out waiting for download mode
- This typically occurs during the device’s transition into DFU mode.
- Fix: When you see “Checkmate!” in the terminal, unplug your device and plug it back in.
- Error: LIBUSB_ERROR_ACCESS
- This is a permissions issue, often related to not using sudo or lacking proper permissions for USB access.
- Fix: Always run the command with sudo. For example:
sudo palera1n
If this issue still persists, make sure you have the necessary permissions to run palera1n.
- Running palera1n on Debian-Based Distros (e.g., ubuntu)
- There has been users reporting issues specifically on debian-based systems where palera1n fails to jailbreak you.
- Fix: Switch to palen1x.
If palera1n continues to fail:
- Download palen1x.
- Create a bootable USB with palen1x using a tool like Balena Etcher, Rufus, or Ventoy.
- Boot into palen1x and retry the jailbreak process.
Thank you to @frosty leaf for writing this tag.
-f = rootful, dont use
-l = rootless, what you should use
why?
!t whyrootless
Hey @gilded wasp, have a look at this!
Why rootless > rootful:
- There isn't any storage penalty (such as the 2-5 GB bindfs or 10GB+ fakefs storage penalty) compared to stock iOS
- Most future development of both tweaks and palera1n will primarily be rootless
- In general, rootful tends to have more and harder to troubleshoot issues in comparison to rootless
Yes, tweak compatibility for older tweaks may be better than rootless, but many older tweaks can be patched in various ways to work with a rootless setup.
ok i understnad thank u
palera1n work iphone 13 18.0.1?
no
no
Why was neccessary the same answer?
Why was neccessary the same answer?


bros acting as if he's never doing it
will palera1n ever work for iPad 8th iOS 18.1.1
never
Hello is palera1n work for ipad 7 ios 18.1.1 ?
Did any one try it
I have checked it on ios 18.1 it work fine but idk if it will work on ios 18.1.1
it should work also cause it works on 18.2 beta as I read from announcements

:palera1n: 
Hi, I have a question. I want to buy an iPad Pro 10.5 with version 17.7.3 from eBay
On cfwg they state, that this version is not supported
https://ios.cfw.guide/get-started/iPad-Pro-(10.5-inch).html
I understand checkmate, that it’s not patchable by the iOS version and the A10X shall be jailbrable either…
You know any details, if it’s safe for me to buy?
Thanks in advice
Find out what jailbreaks you can use on your iPad Pro (10.5-inch).
ipad 10 is not checkm8 vulnerable
only ipad that you can update to latest and still can jailbreak is ipad 7
ok, thanks. Means 17.7,3 is not working on iPad Pro 10.5 for jailbreak, correct?
palera1n wont work on 17.7.3 because of a kernel patch
since palera1n relies on the bootROM exploit called checkm8 to patch the kernel, some kernel patches released by apple can break the exploit
thank you for the explanation. Wasn’t aware of it before. 🙏
np :)
ipad pro 17.2 A12X can jailbreak
no
😭
huh!
Ipad 7 32gb or ipad pro 2nd gen 256gb and why
I wanna buy an iPad that I can jailbreak
$125 vs $160
pro as in 11 or 12 inch
also
what version is the 2nd gen on
let’s go to #general too
should i factory reset my iphone 8 with ios 16.7.10 to jailbreak with palera1n?
yes
ok i gonna do it
He said iPad pro 10.5, not iPad 10
The other user misread the message, the iPad Pro 10.5 is checkm8 vulnerable (he though you were you talking about the iPad 10), iOS 17.7.3 cannot be jailbroken atm, but palera1n should have an update pretty soon adding support.
Hi all can anyone help me with jailbreak. im on iphone X using ios 16.7.10 im trying to use palera1n but on install i get to when i see Palera1n flash up but the device boots with no app
why not 😭
they have to release it for ipad 8th gen ios 18.1.1
omfgg
no they don't
- you're not entitled
- checkm8 was basically patched in A12
Alguien que pueda hacer paso a paso la instalación
- Este es un Discord solo en inglés. (This is an English only Discord)
- https://ios.cfw.guide/installing-palera1n/
Guide to installing palera1n
Random question does anyone know what type of exploit palerain uses to jailbreak and how it works and why it only works on ipads?
palera1n uses the checkm8 exploit, it's a hardware exploit that takes advantage of DFU mode on iDevices. checkm8 was patched on A12+ CPU's, but some newish iPads (2018) are still using the A10 chip, hence why they can be jailbroken on the latest versions of iOS.
alright thank you
no problem
would you happen to know what coding launguages palerain was made with?
c
Oh okay thanks
bro is making checkm8 2.0 
possibly
I have some ideas
But idk
!t pacppl
PAC/PPL bypasses
Back in iOS 14 and below, you could jailbreak with just a kernel exploit. However, in iOS 15, Apple introduced new mitigations that meant for A12+ devices, you need more than one exploit for a jailbreak.
Kernel exploit
A kernel exploit allows you to read and write to kernel memory. On A11 and below, this is enough to become root, unsandbox yourself, and have a full jailbreak. On A12+ (for reasons mentioned further down) since iOS 15, a kernel exploit only gives you limited abilities. Examples include temporarily overwriting system files and partially unsandboxing yourself (e.g. for installing TrollStore).
PPL bypass
PPL (page protection layer) is a system that ensures that you can’t write to important data structures with just kernel memory read and write. In iOS 15.2, Apple put the ucred structure behind PPL, which stores information about a process’s privilege level, sandbox and entitlements. Thus, you need a PPL bypass in order to have a jailbreak, as you need to be able to unsandbox yourself and gain root privileges.
PAC bypass
PAC (pointer authentication code) is a system in which pointers (which are ‘addresses’ to areas of memory) are cryptographically signed, meaning that you can’t manually overwrite pointer values because the system can tell if a pointer has been tampered with. Its job is to ensure that everything is executed in the order that it was intended to be, and that an attacker can’t arbitrarily call a function in the kernel for their advantage. With a PAC bypass, you can get around this requirement, and can (for example) call an arbitrary kernel function (also known as the ability to kcall). While a PAC bypass is not required, a lot of PPL bypasses require kcall to be exploited, and thus need a PAC bypass.
SPTM/TXM
With the release of iOS 17, PPL was completely replaced on A15+ devices, as well as on M4 iPads. SPTM (secure page table monitor) and TXM (trusted execution monitor) are two new components which, together, provide a stronger replacement for PPL. SPTM will most likely require a bypass for jailbreaks, and for TXM it’s currently unclear as to whether this needs a bypass. It’s important to note that A12-A14 and M1/M2 devices still have PPL in iOS 17, however, M2 has SPTM in iOS 18.
It’s important to note that both PAC and PPL were introduced in A12, hence why A11 and below require just a kernel exploit to jailbreak.
there's what you need to exploit
thanks
im on ipados 18, if they patched it in 17 then how does it work on ipad 7 on ipados 18
17.7.3 is newer than 18.0
the major version releases are separate branches so fixes can be back ported to older phones that don't run the latest branch
thank you for the correction. I was wondering, as I knew checkm8 not patchable, but the iOS 17.7.3 stated as N/A. so waiting for the next update 🙏
just downgrade to 17.7.2
can you please guide, how to downgrade? I don’t have a backup but don’t mind to loose previous data on the device
- download 17.7.2 ipsw https://ipsw.me
- click shift + restore in itunes
- select ipsw
- downgrade
im stuck at booting kernal. I checked reddit they said something about rootless/rootful?
Is there some solution to that by changing root mode? if so then how
Are you using rootless or rootful
im unaware how do i check
im doing rootless
I tried the rootful one it didn’t work
im still stuck on booting kernal
device and ios
Isnt booting kernel the stage where it ends even with successful jb?
hi guys i’m new to palera1n
will iphone 13 ios 16.6 work?
When i start the jailbreak i have the error message : heuristic strategy failed, setup packet was not accepted. Can semeone help ?
(iPad Air 2 IOS 15.8.3)
use dopamine
just follow https://ios.cfw.guide/installing-dopamine-trollrestore or https://ios.cfw.guide/installing-dopamine-sideloadly instead
Guide to installing Dopamine by installing TrollStore via TrollRestore
Guide to installing Dopamine using Sideloadly
Hello! I recently got an iPad pro gen 2 (on 17.7.2), and have been thinking about jailbreaking it. I have jailbroken other devices before, but I was wondering if there are any precautions I have to take before jumping in
which chip does this use
oh A10x
yea u can jailbreak @prime marten
no hassle
ok legit, what about linked wallets and passwords and stuff like that?
that’s only for A11 chips
if ur curious
!t nosep
When using checkra1n/palera1n on the iPhone 8/X running iOS 14 or later, you will not be able to use any of the following SEP features in a jailbroken state:
- Passcode
- Touch ID/Face ID
- Apple Pay
Additionally, if you’ve ever enabled a Passcode on iOS 16 on the iPhone 8/X, you’ll need to erase all content and settings in order to successfully jailbreak with palera1n.
oh u mean if something happens with ur data
Ah ok gotcha!
I have a password manager installed on my iPad currently, is that something I should remove before jailbreaking?
no
as i said that’s for A11 chips, you’re on A10.
so u dont have to worry about anything, you’re fully compatible
Ok solid, thank you!
np
And I'm assuming there's not much of a difference between palera1n and palen1x other than OS
palen1x = the os that’s recommended to run palera1n (the jailbreak itself)
palera1n = is the jailbreak
Ohhhhh ok sorry I was a little confused
no worries
(I know I'm asking a bunch of maybe dumb questions but) would you recommend finding a Mac or a Linux machine to apply the jailbreak or is it just as easy on a Windows machine
you can’t run palera1n on a windows machine at all
I'm having some issues putting the iPad into DFU mode
I am holding power and home, and then home
i dont think its that
Jk I got it
is it not volume down + power (4) then volume down (10)
ok well if that worked then uh
good job 👍
Hmmm but now I'm at another error
which
"Timed out waiting for download mode"
screenshot?
!t palera1nfix
Hey @prime marten, have a look at this!
If you encounter issues while trying to jailbreak using palera1n, here's a troubleshooting guide:
Common Issues:
- Error: status_exploit_timeout_error or timed out waiting for download mode
- This typically occurs during the device’s transition into DFU mode.
- Fix: When you see “Checkmate!” in the terminal, unplug your device and plug it back in.
- Error: LIBUSB_ERROR_ACCESS
- This is a permissions issue, often related to not using sudo or lacking proper permissions for USB access.
- Fix: Always run the command with sudo. For example:
sudo palera1n
If this issue still persists, make sure you have the necessary permissions to run palera1n.
- Running palera1n on Debian-Based Distros (e.g., ubuntu)
- There has been users reporting issues specifically on debian-based systems where palera1n fails to jailbreak you.
- Fix: Switch to palen1x.
If palera1n continues to fail:
- Download palen1x.
- Create a bootable USB with palen1x using a tool like Balena Etcher, Rufus, or Ventoy.
- Boot into palen1x and retry the jailbreak process.
Thank you to @frosty leaf for writing this tag.
basically when it says checkmate just unplug ur device and plug it back im
Ok phew
That worked
I always forget how stressful jailbreaking a device is for the first time
lmao
Anybody know how to fix this?it just keeps trying to go into DFU mode
you’re supposed to press the buttons urself
😭
I did but it keeps telling me to hold them
Okay let try again
DFU (Device Firmware Upgrade) mode is a mode which allows a device in any condition to be restored to a fresh version of iOS (not to be confused with Recovery Mode). This can also be used to jailbreak using checkra1n and palera1n!
For how to restore in DFU mode, see /tag dfurestore
ok that didnt help
Oh
ur screen wont display anything while in dfu mode @strong flume
this is recovery mode
!t palera1nfix
Hey @strong flume, have a look at this!
If you encounter issues while trying to jailbreak using palera1n, here's a troubleshooting guide:
Common Issues:
- Error: status_exploit_timeout_error or timed out waiting for download mode
- This typically occurs during the device’s transition into DFU mode.
- Fix: When you see “Checkmate!” in the terminal, unplug your device and plug it back in.
- Error: LIBUSB_ERROR_ACCESS
- This is a permissions issue, often related to not using sudo or lacking proper permissions for USB access.
- Fix: Always run the command with sudo. For example:
sudo palera1n
If this issue still persists, make sure you have the necessary permissions to run palera1n.
- Running palera1n on Debian-Based Distros (e.g., ubuntu)
- There has been users reporting issues specifically on debian-based systems where palera1n fails to jailbreak you.
- Fix: Switch to palen1x.
If palera1n continues to fail:
- Download palen1x.
- Create a bootable USB with palen1x using a tool like Balena Etcher, Rufus, or Ventoy.
- Boot into palen1x and retry the jailbreak process.
Thank you to @frosty leaf for writing this tag.
tldr: unplug and replug when you see “Checkmate!”
@solemn verge is this already mentioned in ios.cfw.guide
like if u get the timed out error
and macos
yea
no
bootra1n is a
completely different thing
you boot… into bootra1n
not windows related at all
I was just trying to follow this
I might be making a new tutorial on how to jailbreak iphone X to Iphone 14 Pro Max!
So make sure to follow!
In this video, I'll show you how to jailbreak your iPhone and how to undo it, all explained step by step. I've made sure to keep the instructions easy to follow.
I used bootra1n with checkra1n 0.10.2 in it, it supports A5-A11 devices inc...
!t yt
Hey @sharp pond, have a look at this!
YouTube is typically a very poor source of information and should be avoided. Many jailbreak YouTubers promote piracy, outdated tweaks, or just flat out fake jailbreaks. Reliable sources: iOS Guide, r/jailbreak Wiki, Apple Database and The Apple Wiki.
Oh my bad thnx
Just replug the phone
idk why but when i try to jailbreak (rootify) my ipad mini 4 (A8; ipados 15.8.3) after rebooting the app doesn't show up. I've jailbroken it before with dopamine but removed the jailbreak, after that I jailbroken it (non rootify) with palera1n, the app showed up and everything worked.
When i tried to rootify jailbreak, I used "sudo palera1n -B -f" first and "sudo palera1n -f" after it was done. Someone knows why I can't rootify jailbreak my ipad?
I even removed the passcode (even tho it isn't required to be removed in this case)
because rootful poopoo
use rootless
its abandoned by everyone
why do you need it
for things which shall not be mentioned here
L
more like F
Well, we can't help you if it breaks our rules
Why rootless > rootful:
- There isn't any storage penalty (such as the 2-5 GB bindfs or 10GB+ fakefs storage penalty) compared to stock iOS
- Most future development of both tweaks and palera1n will primarily be rootless
- In general, rootful tends to have more and harder to troubleshoot issues in comparison to rootless
Yes, tweak compatibility for older tweaks may be better than rootless, but many older tweaks can be patched in various ways to work with a rootless setup.
well the tweaks I'd like to use need rootful
which ones
idk if that matters
yes it does, because if I know what it is I can see if there is a rootless alternative
sadly there isn't, but like I said I can't mention that here
Bro really said frpiracy
this is a joke ^
all piracy tweaks exist for rootless anyway
he probs cheating in a game or som
i game god
probs
so you are pirating
dude idk that tweak I'd like to use needs rootful afaik
and if it is you shouldn't be playing the game
mcdonalds application
yeah 229$ expensive
it most likely doesnt even work on 15+
stop playing that game then
it doesn't need your money
or your piracy
if an iap is 229 then be assured they have protection
it's not a game tbh
against piracy stuff
no it hasn't because it works on android

this aint no android
🔥
anyway
good luck
rootful on A8 will never work probs
because A8 is ass
sad
yeah ik
but still works
I just thought there is some kind of exploit which helps getting rootful jailbreak with a8 devices
no
I got the trollstore installed and dopamine (jailbreak removed), those apps don't interfere when I try to execute the palera1n jailbreak correct?
wait, so iap piracy works rootless? Can you pm me that tweak you are referring to?
!t piracy
Hey @signal bronze, have a look at this!
What is piracy?
Piracy is a form of unauthorized redistribution such as getting apps, in-app purchases, tweaks or themes without paying for them. This is often also unsafe as you are not getting things from the official source and pirated versions could have malware. This includes getting IPA files for free apps.
How do I know if I have piracy?
If you are not sure if a repo is piracy or not, you can send the name of the repo in to a genius, mod or admin in a DM and ask for further information. If you send a piracy link in a channel you will be filtered and informed further via DM. Doing so may also result in a warning from a member of staff. Use DMs to avoid the possibility.
Do note however that sharing piracy in DMs for any other purpose than asking if it's safe is still a violation of the rules and is warnable.
I have piracy repos and/or pirated tweaks, what should I do?
The standard procedure here is to remove jailbreak (also known as "restore rootfs" on older jailbreaks). To learn more, type /tag rootfs (or /tag legacyrootfs for older jailbreaks).
they dont matter at all
no
I only found one tweak and I read somewhere it only works with rootful jailbreaks (it doesn't work when I try to activate it rootless)
you mean no to rootless or no to pm me the tweak?
no to the later
i do not endorse piracy
if you cant pirate on ur own
then its a skill issue
Enjoy piracy
SOMEONE HERE who can help me ?
well, i have an ipad ,17.4.1 and followed the steps with the terminal (read macbook pro), but it has usb c - ports only.
Adapters work
so i've bought myself a USB hub station, with an usb - port
but it doesn't find my ipad.
Can u see it in finder
nope
it's charging up my ipad but that's it
normally pictures will show up etc. if i connect my iphone straight in to it .. BUt even with my iphone it does nothing.?
Any recs on installing a signed .ipa file? I tried appsync unified but the repo is down, and I have too high of a version for Trollstore
then its a power only usb hub
no data transfer = no palera1n
sorry
!t tsjb
Hey @prime marten, have a look at this!
If you have a device on iOS 16.7.x or iOS 17.0.1+ and it is jailbroken, you can use TrollStore Lite as an alternative to the regular TrollStore. TrollStore Lite is recommended if your device does not support TrollStore, otherwise you should just use that.
You can install TrollStore Lite from Havoc by clicking the link below.
Oh sweet, thank you!
Hmm, getting errors when I try to install it
what errors
https://procurs.us add this repo
i think this is it
no thats the mastodon instance
uhhhhhh
brb
Haha no worries, thank you for the help
this should be it
add this as a repo
and install ldid
it starts with a lowercase L
not capital i
Ok it looks like procursus is down
All of the apps from the repo are showing as greyed out
And when I try to add it in Zebra, it doesn't work
Oh well
Oh shoot now everything is greyed out
what ios even is this
17.7.2
odd
Yeah it's weird since I was able to install stuff like 30 minutes ago
And now the "get" button for every app on Sileo is greyed out
Ok very weird, I restarted Sileo and now it's showing up
I had tried to install appsync and it looks like it was messing with other stuff, so as soon as I removed it, it worked
And I was able to install my .ipa file!
Hey guys, I am tryna open the terminal app but it just quits itself
Could one of u help pls
uhh
is your device managed by a district or organization
Best way to block updates? The notification badge on the settings app is annoying 😅
!t blockota
Hey @prime marten, have a look at this!
To block OTA updates, you can install a modified tvOS beta profile. This works even without a jailbreak. Note that the profile expires and will stop blocking updates on <t:1769770800:D> (<t:1769770800:R>).
You can re-enable updates by uninstalling this profile in Settings -> General -> Profiles & Device Management.
If you're jailbroken, you can also install the OTADisabler tweak instead, but note that it is harder to remove while unjailbroken.
Yes
hello jailbreak iphone 13 ios 17.5.1 ?
you cant
Do you happen to know when? thank you
!t eta
Hey @slim hinge, have a look at this!
We have no way of knowing. When there is news, it will be in #announcements
Most probably the mangement software is blocking the app
Nothing you can do unless you have a device that's yours
i wonder how the software is blocking it
like could u just change the app id or something and it would count as a different app or does it like do some stuff like checking the executable hash or something?
you should have reset the jaibroke with palera1n
it's an issue with never removing checkra1n sounds like
what do you mean by it doesn't seem to work, can you show a picture of an error or anything?
it's normal for it to get stuck at booting kernel
you have to press control+c then re run palera1n --force-revert -f
and to ssh on dopamine this is what I run
(new window, keep iproxy running)
ssh mobile@localhost -p 2222 ```
dopamine and palera1n should be the same though
When it says Booting Kernel, in terminal press control+c then run the command again
Make a thread on #969343289641828382
it does all dis nd after doing all the text after pongoOS it flashes red and boots
nd doesnt work :<
Are you having the same issue as @tardy bolt?
mayb,,
doing anything will do da red flash
cant rly take it but, itl go to pongo os, say booting kernel and do alot of text, followed by a full screen solid red flash
go to black, apple logo, and boot non jb-d
the text is normal during unjailbreak, solid red I have never seen. hm
yea
trying to do chimera crashes trying to do step 1/3, and unc0ver says its unsupported when its not
wait you said non jb-d, you realize that the --force-revert -f tag is for removing rootful right?
that cmd and palera1n -f does the exact same thing
no palera1n app, and sileo is here but crashes on opening
have you tried chimera patch
?
air 2
wh
you mean air 1?
unc0ver max is 12.5.5
mini 1
???
oke ya
its worked b4 on .sh, but sh its busted
it fact the sileo installed is from sh
do you mean checkra1n?
nop
5,4 is air 2
Feb 2023 palera1n 😭
and has it installed
!t chimerapatch
Chimera's success rate can be greatly improved on some devices by injecting the chimera_patch dylib. The easiest way to install this is to sideload a pre-patched version of Chimera from jailbreaks.app. You can do so by visiting https://jailbreaks.app/ and navigating to the "Apps" tab on the bottom, expanding the "Jailbreaks" category, and finally choosing the "Chimera (Patched)" app. You can also sideload Chimera-patch using Sideloadly. A prebuilt ipa can be found on jailbreaks.app at https://jailbreaks.app/cdn/ipas/ChimeraPatch-resigned.ipa. You can also patch a Chimera IPA manually.
To patch Chimera manually, start by downloading the compiled .dylib file from this GitHub repo, and injecting it into the Chimera .ipa with Sideloadly by expanding the "Advanced Options" window and enabling the "Inject dylibs/frameworks" option. Then, proceed like normal.
Please note that, while chimera_patch is open source, it does modify the .ipa and thus can be considered an unofficial patch. If you are not comfortable with doing this, refer to the stability improvement suggestions on the chimeramoment tag.
i have a air 1, air 2, pro 10.4
oke
this time it asks to reboot, does smth, and crashes i think, boots, and now cydia is gone
was there for giggles
but is gone
and sileo crashes still
opening the patch app again, and hitting the button waits a bit, then crashes the app and puts me back at the home scr
you might wanna reset the device?
there's probably a ton of leftover files
or try restore rootfs in chimera
ill jus reset
same thing :3
you reset the ipad that fast?
idk what's going on, make a genius bar post?
wha
o
when i try to jailbreak iphone x with palerain, it goes into dfu mode, does the whole process of booting up, but when it boots up the phone, it's like no jailbreak was done? what am i doing wrong?
let me guess
you have a passcode set
No. i don't, i removed passccode because that's what the instructions say.
no the instructions say to erase all data and content
and not to just remove it
https://www.reddit.com/r/jailbreak/comments/1ejdwe2/i_cant_jailbreak_my_iphone_x_palera1n/ I'm getting the same thing as this guy posts on reddit.
so you mean I need to factory reset the phone before attempting the jailbreak?
that's what the guide says
that makes sense now
for palerain on windows, do u rly need the usb and ventoy stuff?
what is ventoy
is the iphone x jailbreak with palerain only temporary? so it becomes non jailbroken everytime you reboot?
yes
so there is no work around for it i guess then?
Yes
yeah
u need the usb
Hey doubt, i’m with a iphone X 16.7 i want to do jailbreak by palerain.. but i dont have mac or linux is it possible with windows?
!t palen1x
Hey @worn breach, have a look at this!
palen1x allows you to use palera1n-c on Windows computers via live-booting. You will need a USB flash drive or SD card for this.
yes its the same thing i posted
on an iphone x, i used palerain to do the jailbreak, got it done successfully once, but then the device rebooted and jailbreak is gone again, but when i try to jailbreak again in the dfu mode, it is not showing me the palerain app anymore?
Someone mentioned i need to erase all content to do the jailbreak, do i need to erase all content each time?
prob, and if so, thts booty
bc im in the same boat, about to jb it rn
(first time)
depending on what you want to do with the device with the jailbreak, it is a lot of hassle.
yeah agreed, did it die, or did it reboot bc of some other reason
do you also have icloud / find my turned off when doing jailbreak?
it crashed.
im only using it for one tweak, so i dont think it would crash
what caused it to crash so i can avoid it
no idea, it just restarted.
what tweaks u had
tweaks? what do you mean
i dont really want to download any tweaks, trying to simulate location for an app that it won't do it without jailbreak
ur gonna have to download a tweak to do tht
but if u downloaded nothing, and it rebooted, thts super unlucky
oh yeah, maybe, i haven't gotten to that part of the steps yet
im bout to jb mine, i have all locations and stuff off to answer your question
im bout to make a brand new icloud aswell
not sure about this, but did you also have to sign out of icloud?
i just got the phone bro, i havent done anything to it but hit skip on everything it asked (even logging into icloud), and downloaded the files needed to jb on my usb
you only have to erase after setting a passcode
do you know if signing out icloud / turning off find my is required before redoing the jailbreak?
it’s not
how can i remove icloud from iphone xr someone help
how can i remove icloud lock from iphone xr someone help
and i dont have apple id and pass
is palerain for windows, iphone x 16.7.10 rootless or rootfull? @warped horizon
impossible
if you mean palen1x you can choose
at what point in the process do u get to choose, bc i wanna do rootless
the initial command
wait whats the command or is it something thts gonna pop up while doing it as an option?
if you just type palera1n by itself it defaults to rootless
that is rootless
it’s the letter L not 1
you dont have to erase each time
When i check on website i cant find iphone 8 + its the same for iphone 8?
What
If you mean support by palera1n then it is the same
Here for example i didnt see iphone 8plus so I assume that is the same support as 8normal
i'm using the palerain jailbreak for iphone x and it says i need to disable pin on the device.
but once the jailbreak is done, is it still not possible to add a pin on the device? (I tried to add a pin once successfully done the jailbreak and it just rebooted the device and jailbreak is gone)
no, on iphone x and 8 series u cant have a passcode set if u want to jailbreak
not 100% sure what exactly was but i assume some kind of security chip or something gets disabled, correct me if im wrong
got it, and if you set a pin and the remove it afterwards, can you rejailbreak without erasing all content of the iphone?
if ur on 16.0 or higher u will have to reset ur phone to be able to jailbreak
i think on 15 u just have to have it disabled
so then you gotta back up phone to the computer and restore it after jailbreaking? i'm not sure if restoring from computer back up will reboot the device itself?
I also read that the palerain jailbreak does not like usb c to lighting cables, you have to use usb a to lightning, is this actually true?
sometimes it might not like the cable yeah, its not really a 100% tough. if that wont work try with a usb a
restore it after jailbreaking?
idk what i was thinking, so instead of setting up the way i want my apps and organization of the icons, i can restore it from back up and keep the jailbreak. but if restoring from computer back up results in the phone restarting, then it will obviously not work.
on what ios version are u exactly?
the latest iphone x update, ios 16.7.10
a lot of work to use some tweaks, but at least it is do-able.
but yeah u will have to erase the phone if u ever set the passcode to jailbreak again
You can use [[checkl0ck]] to enable passcode and face ID but it only works in jailbroken state, after reboot there is no security for your device anymore
[[checkl0ck]]
Wtf
i think it might still be broken
Bot?
if im not wrong i think the canister api or something
at least thats what i heard while back
Ok
not sure if its still the same problem
Borked Canister API
ís there a way to mount bindfs on palera1n
!t whyrootless
Hey @mint jetty, have a look at this!
Why rootless > rootful:
- There isn't any storage penalty (such as the 2-5 GB bindfs or 10GB+ fakefs storage penalty) compared to stock iOS
- Most future development of both tweaks and palera1n will primarily be rootless
- In general, rootful tends to have more and harder to troubleshoot issues in comparison to rootless
Yes, tweak compatibility for older tweaks may be better than rootless, but many older tweaks can be patched in various ways to work with a rootless setup.
Hello!! I need healp pleas. How to disable passcode for the iPhone 8 iOS 16.7 ?
Factory reset in Settings
Settings -> General -> Transfer or Reset iPhone -> Erase All Content and Settings
When setting it up, do not set a passcode
You cannot have a passcode set at any time
Thank you
i want to mount bindfs like dopamine mod mount , i am using rootless
you cannot bindfs on dopamine
rootful dopamine does not exist*
Hello friends,
Iam new to jailbreak
Some one tell me which is the best iphone model to buy for jailbreak (i use it for app testing) Frida etc
I heard gpay doesn't support on certain lower versions ios
!t latest
Hey @daring crater, have a look at this!
Latest released iOS versions that are able to be jailbroken
If your device is older than the ones listed here, it's jailbreakable on the newest version.
If your device is newer, it is unable to be jailbroken at all.
iPhones / iPods
iPhone 13 Series - 14 Series (A15 - A16) 16.5
iPhone SE 3 (A15) 16.5
iPhone XS/XR Series - 12 Series (A12 - A14) 16.5.1
iPhone SE 2 (A13) 16.5.1
iPhone 8(+), X (A11) 16.7.10
iPhone 6s(+), SE 1, 7(+) / iPod 7 (A9 - A10) 15.8.3
iPads
iPad Pro 6 / iPad Mini 6 (A15 / M2) 16.5
iPad 8 - 10 / iPad Pro 3 - 5 / iPad Air 3 - 5 / iPad Mini 5 (A12 - A14 / M1) 16.5.1
iPad 7 (A10) 18.2
iPad 6 / iPad Pro 2 (A10(X)) 17.7.2
iPad 5 / iPad Pro 1 (A9(X)) 16.7.10
iPad Air 2 / iPad Mini 4 (A8(X)) 15.8.3
Use the /canijailbreak command or the buttons below for more information.
of course you can
So did hhls
but that isnt really bindfs
that more like
/dev/disk1s8 on / from userspace
cant u appreciate one moment when you’re getting praised upon
dopamine rootful confirmed
rootful virtual cydia 2024 SpongeBob edition unthetered
guess what, dopamine already uses bindfs mounts
/usr/lib is a bind mount to /var/jb/basebin/.fakelib
Will palera1n will be an ipa app like dopamine
No
Ever?
No, palera1n is a bootrom exploit based app, it doesn’t use anything like dopamine
Damn
Or will dopamine support ios 18.x
No
Damn
We have no way of knowing. When there is news, it will be in #announcements
Cool =/
Does this jailbreak work on iOS 15.3.1 / iPhone 12 Pro Max
nope
Guide to installing palera1n
ok so
lets talk here instead https://discord.com/channels/349243932447604736/1318714322658005082
i have an iphone x on ios 16.7.10, can i install palera1n without formatting after i removed passcode
can i backup now and restore to it?
is there a way without formatting?
no
No
I'm using palen1x and it keeps booting me into "grub" am I doing something wrong?
choose grub2 mode instead of normal mode
what iso file did you download
grub2 worked
oh
[[fakepass]]
Awesomesauce thanks gir
fakepass from https://repo.alexia.lol/ lets you set a passcode but no face ID/touch ID
is her repo back up
Alexia repo doesn't work?
What error
Get libsandy from https://opa334.github.io/
You have sent a link to a repo, you can use the buttons below to open it directly in your preferred package manager.
Fake pass gives this
Make sure you have ElleKit installed
Where do I get ellekit
Should be in the palera1n repo
What's the palera1n repo 😭
You have sent a link to a repo, you can use the buttons below to open it directly in your preferred package manager.
When I try to download fake pass, zebra either crashes or says "finished" even though when I go back to check it didn't
What should I do?
I just tried to "upgrade all" and it did the same thing
Said finished but didnt
And then when I tried again it just crashed
Try using Sileo
After a few tries it worked, but prob switching to sileo
Is this normal?
"libidn2" conflicts with libidn2-0
"ntph" conflicts with libnpth0
No but I think that’s just a zebra skill issue
Try upgrading through sileo


