#palera1n
1 messages · Page 43 of 1
hmm, i think the culprit is substrate safe mode
installed it on ellekit and it threw me into safe mode
huh
not substrate safe mode
Hello
springboard crash logs should be in the same place
Is there any way to remount r/w and Do All settings? The new palera1n app is slightly different
check for any newer ones
remount shouldn't be needed anymore iirc but is an option
enable tweaks, launch daemons and then userspace reboot should be enough to "do all"
this is the latest, which is JETSAM again
But for the RocketBootstrap trick is needed the options I metion
are*
oh wait, remount r/w is "mount directories"
i don't recall it being needed anymore in safe mode but it's there in case it is
alexia
i resprung from the palera1n app
and then it looked normal
opened discord, and it crashed
now im in a respring loop
oof
hmm, jetsam again
RocketBootstrap and RocketBootstrapFix are both installed
i fixed it a week or so ago by downloading a different one, could you remind me how again please..?
will this work with ElleKit?
what ios version
16.1
I understand, I will try something. The option Userspace Reboot just reboots the phone? Cuz' I was messing around with these options and it rebooted into unjailbroken mode
i just tested and it seems like rocketbootstrap still doesn't work with ellekit currently, at least on palera1n
ok so what do i do now
im trying that guide u sent me a while ago
w/o installing Libhooker-shim
and it works!
the odyssey rocketbootstrap would be the correct one to install on ios 16 i believe, as lately i've seen ppl report rocketbootstrapfix not work even on 16.1.x
but with ellekit it will most likely not work correctly regardless, since i see sandbox deny errors in syslog
oop it crashed again after some time
@silent anchor so sorry for wasting all your time :P
I just realized that I added a repo of yours, hahaha, what a coincidence
another crash (unsure if this is the same, happened immediately)
@silent anchor
ellekit seems kinda unstable atm
it's probably a tweak incompatibility, not sure what it could be
maybe try removing them one by one to find out
Is there any way to get Watusi 3 to work on iOS 16.4.1?
Jut crashes, I think it's because of Rocketboostrap
Just*
nothing seems to stand out to me apart from rocketbootstrap, but even that isn't causing crashes for me, just doesn't work
odd
Hi, anyone know how to solve this.
I already try:
- Click Proceed, and the screen blank then back again, but still got the same messages like before
- Try to jailbreak again using -palerain, but always got the same problem like this
- Try to remove jailbreak using -palerain --forcerevert and the palerain still there with the same messages (tried more than 4-5 times)
i'm getting this error after entering DFU mode. does anyone know how to fix it?
have u try to unplug then plugin again directly?
yeah
what cable did u used?
brand new cable i just got because my old one broke
uh
oh
its a USB A to Lightning
it's still the same
i got it to boot to pongoOS earlier but i didn't notice the note to restart it when it freezes
i just don't know what i did earlier
Anyone knows how to fix when you get stuck in download mode device found error? palerain? Fullroot?? Please?
How bro?
How you fix it?
fixed a week ago
i was wondering could i downgrade my ipad to use palra1n?
no
how
how what?
like why wouldn't it work if i downgrade my ios version
- there is no way to downgrade 2. your iOS version isn't the problem - iPad 8th Gen uses the A12 chip (checkm8 only works on A8-A11)
oh okay so theres no official way to jailbreak the ipad i have currently
no - not on that iOS
hm?
no
would i just have to keep my version of ios till the future of a jailbreak for that version im assuming
yes
help me
I successfully cracked it, but when I add the source, it shows an error
pls help. Thanks
I keep getting this error how do I resolve it?
you have to remove vnodebypass
if you are not able to then :
- open filza and go to /var/lib/dpkg/info/
- search for vnodebypass in the searchbar and delete all the files that have vnodebypass in it
- next navigate to /var/cache/apt/archives/ and do the same thing (it is not a problem if there are no files of vnodebypass in here)
- last go to sileo and remove vnodebypass and respring
and if you are not able to and dont have filza:
- open terminal and type "su root" and put in your password, default is alpine
2 type in "cd /var/lib/dpkg/info/" - type "ls -l kr.xsf1re.vnodebypass
*" (name in the error)(you have to type the*) - type "rm kr.xsf1re.vnodebypass
*"(you have to type the*) - type "cd /var/cache/apt/archives/" and do the same 2 commands before (again its okay if no files come up)
- open sileo and remove vnodebypass
btw i came here to ask if anyone has found a good safe shutdown alternative for palera1n
hmm
use reverie
i'm using it in ios 15.7.5
how do I access the terminal normally?
any ideas?
I got the solution. To everyone who got the problem like this on 16.4.1 Iphone X. Just use the old method using command palera1n -c -f . Then after boot, palrea1n -c. Jailbreak & sileo works fine again 😁
Hi Guys, I have a problem with my Iphone 7 with 15.7.4, at the end of the procedure, where by running done , the phone resets but hasn't installed anything. There are no errors. Where am I wrong? Thanks for your help
How do I install IPA's using Palera1n? Either Zebra or Sileo
install trollstore helper
I want to install something like Dolphin-iOS but the package in the repo requires non-rootless jailbreak
thx that solved the issue
what to do with apps crashing on palera1n?
What apps?
tiktok (chinese version) and notes
Probably cause you installed some tweaks that are going in conflict whit these apps
but I don’t think that the cause can be is the jailbreak
yeah
have you tried to reinstalling these apps?
I tried
And?
Iphone 7
uhm
I tried now
but
Not crashing
And I got some tweaks too
so idk probably it’s just a bug whit the iOS version that you got
What version do you have?
weird
I don’t really know how can I help you whit these,I didn’t encountered any of these problem so I don’t know how to help you
sorry
Thank you
Just try to jailbreak another time but I don’t think that this can help
I'm getting "<Error>: Timed out waiting for download mode (error code: -status_exploit_timeout_error)" when running the palera1n command in Terminal now. Rejailbreaking it because it randomly shutdown and opened in recovery mode.
Evidently a common error but unplugging/replugging after 'Checkmate!' isn't fixing it. Tried a bunch of different timings too.
maybe just the phone is the problem that go in conflict whit the jailbreak
iPhone X
Same as the iPad
seems like its common crashing with tiktok though
is there any fix to tiktok?
First
Have you tried the tiktok king tweak
Why it’s Chinese?
I usually watch the chinese app store verison
and all the english tweaks doesn't work with it
Than he can try to reinstall TikTok whit an ipa file
You tried to reinstall these apps whit ipa file?
yeah I did
palera1n conflict?
Yea
yes
No
No, you just need to use the Palera1n -f command as the FS is already in place
How do I access the terminal? do i have to plug my phone into computer?
[[newterm]]
i currently can’t download any new packages because of vnodebypass messsing it up, is there any other way?
for reference im trying to uninstall vnodebypass
if you're able to open vnodebypass try to disable it within the app, otherwise you may have to restore rootfs
the app crashes whenever i open it, i’ve never restored rootfs how do you do that?
Any help please? Stuck here
After attempting this multiple times my phone seems to have bricked. Not force restarting. Any idea where to go from here?
what type of computer?
you're not bricked, just take it out of dfu
I'm guessing you reset all content and settings
Could someone help me with accessing the terminal? I'm attempting to delete a package (vnodebypass) however I am unsure how to access it (would prefer if it can be done via computer)
!t checkra1namd
Hey @twin schooner, have a look at this!
If you’re on AMD/Ryzen, you may be encountering a few issues when using checkra1n or palera1n. This can vary between freezes and straight up crashes. It’s because of AMD’s weird drivers that cause it not to work that well with checkra1n’s/palera1n's exploit. If you’re lucky you can actually successfully manage to jailbreak using checkra1n/palera1n.
Tips to increase successrate:
- Plug your device into your computer's motherboard.
- Use a genuine Apple USB-A to lighting cable.
If you’re stuck on the apple logo please force reboot yourself (see: /tag reboot).
If these don’t work, try to get your hands on another computer (preferably intel), and try to use checkra1n again.
you'll need a tweak like NewTerm to access the terminal on device
whenever i attempt to queue a new tweak it doesn’t install because of the vnodebypass
this is the error causing the issues
Has been a bit of a problem recently, not entirely sure what the cause is. Try a reboot and rejailbreak first
Do i reboot by just restarting the phone? And is rejailbreaking just using the same command to get the jailbreak to apply?
Yes - power the phone off. And use palera1n -f (or just click start without selecting any options if you are using Palen1x)
Amd Athlon
Hello, do you know why in gettin stuck in this process? And how can i fix it?
!t checkra1namd
Hey @twin schooner, have a look at this!
If you’re on AMD/Ryzen, you may be encountering a few issues when using checkra1n or palera1n. This can vary between freezes and straight up crashes. It’s because of AMD’s weird drivers that cause it not to work that well with checkra1n’s/palera1n's exploit. If you’re lucky you can actually successfully manage to jailbreak using checkra1n/palera1n.
Tips to increase successrate:
- Plug your device into your computer's motherboard.
- Use a genuine Apple USB-A to lighting cable.
If you’re stuck on the apple logo please force reboot yourself (see: /tag reboot).
If these don’t work, try to get your hands on another computer (preferably intel), and try to use checkra1n again.
Ohh okay didnt know, so is getting a intel pc or just have a lot of luck and sucesfully jailbreak with my amd lol
But its weird bc when i do rootless i dont have to many errors
tried that and it still refuses to work
I saw something on reddit which states “1. Plug your device into your computer
2. cd into the palera1n directory if you haven’t already (cd palera1n)
3. 3. Run :binaries/$(uname)/iproxy 2222 22 &
4. Run: ssh root@localhost -p 2222 -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null" to connect to the device
5. run: sudo dpkg --remove --force-remove-reinstreq kr.xsf1re.vnodebypass
i did it with palera1n jailbreak and it worked”
i’m not sure how to cd into the directory
Pretty much. The checkra1n exploit has issues in AMD devices due to the drivers. Using a different PC is usually the better option
type cd palera1n into your pc terminal
Okay thank you im gonna ask my friend for his pc, meanwhile i will use rootless i guess, do you know if in rootless i can install something to be able to instal deb files that depend on mobilesubstrate?
Well in the 3rd run it advance to next step
this A9 device?
in cmd? or when loading into the palera1n software for SSH?
Did you use Palera1n or Palen1x to jailbreak?
I used Palen1x
You wouldn’t be able to use the method you found then as it requires palera1n. Are you using rootful or rootless?
I’m not sure why I thought palera1n and palen1x were the same thing but i’m using rootfull
Palera1n is a command line tool. Palen1x use the Palera1n OS - it might be possible to run those commands on palen1x but I’m not entirely aware of how to do that
palen1x is an OS just for running palera1n
@misty meteor Your best bet is restoring rootfs (check palen1x options). You’ll have to go through the process of creating Fake/BindFS and jailbreaking after
Any fix for TikTok keep crashing?
easy, uninstall
Someone knows what happened? it instal palerain but when i open the app looks like this, and sileo is missin but when y try to reinstall it says its already there, any fix?
Wish I could even get the PaleRa1n app..
Yes iphone 6splus
Actually im not stuck anymore but i dont know what happened o thought i was installing palenix 😂
I thought*
Is this version 1.0.9?
Yeap
I had the same error, nothing seemed to work i tried the whole process again with version 1.0.8 and it worked
Do you restore rootfs with 1.0.9 And then you jailbreak with 1.08?
and are you usingi windows
Fullroot?
I always assume new versions contains a lot of bugs, so I went for 1.0.8 instead of 1.0.9, and it all worked out fine.
I used 1.0.8 but i was getting stuck on download device found all the time process
hello guys, someone can help me to install palera1n on mac. i'm tired of following the script installation procedure, it doesn't work...
the downloaded files is instantly deleted when i'm running this command
sudo mv ./palera1n-macos-universal /usr/local/bin/palera1n
!t yt
Hey @dawn ginkgo, have a look at this!
YouTube is typically a very poor source of information and should be avoided. Many jailbreak YouTubers promote piracy, outdated tweaks, or just flat out fake jailbreaks. Reliable sources: iOS Guide, r/jailbreak Wiki, Apple Database and The Apple Wiki.
Guide to installing rootful palera1n
Finally some good stuff, apart from yt lmao
Ty
ignore my use of the r slur i get a bit political when the dislike button isnkentioned
hi, i hope today’s been kind to you all so far!
may i please know if via jailbreak, if i am able to downgrade from ios 15.7.5 to ios 15.4.1 on my iphone 7 plus, so i may use appstore++?
if i checked the sep/bb chart correctly, it states legacy device, iphone 7, a10, from 14.0-15.7.3 is compatible, correct?
• http://tiny.cc/sep-bb-compatibility
• https://gist.github.com/0xallie/aac55c97f7925cddcf5ec3167f85dfe8
& thank you for your time, i appreciate it!
(edit: answered! | as an update, i only have windows, so i cannot downgrade via this method, though, i’ll leave this up in case anyone else has a similar question!)
as a follow-up question, may i please ask if anyone used appadmin & or adownloader with palera1n, successfully?
i’ve seen that an appstore++ alternative may be difficult to find on ios 15, though, i wanted to double-check!
& thanks again, please take care!
if you want to downgrade to use the trollstore version of appstore++, there's no need, you can still install trollstore helper from sileo, it will just only work in jailbroken state
The tag says
A11 devices cannot use a passcode, Touch ID, Face ID, or Apple Pay in a jailbroken state, and must have never had a password after restoring on iOS 16.
so does this mean A10X is fine?
yes
thanks
what phone is that
iphone 10?
iphone x
shit
ig ill just buy a android then
Wait will it work on a12 devices?
Hi, I got this error when trying to Jb with palera1n on my iPhone 6s 15.7.5 : <Error>: Unable to perform softboot: e0004051 (error code: -status_enter_softboot)
any solutions for this problem?
Ok. First you should read the instructions carefully. If your app desapear just after you have entered the command, it's normal because the "mv" command mean "mouve". So if the app disappear from your folder it to magically appears in another. But if really like it in this folder, change the "mv" to "cp" so the app will be copied instead of moved. 😉. Also try to erase everything/restore with the tool inside ...General/Erase your iPhone. Also off any virus program as it may interfere with the jb. Good luck.
nevermind, tried 20 times but not successfull, after asked here then try again and it worked loll
thanks all
Works on iOS 16.5 RC
you guys probably get this a lot but im guessing i cant JB on windows?
iphone 7 ios 15.7.5 which palra1n should use ?
Not on windows but you can USB live boot
!t palen1x
palen1x allows you to use palera1n-c on Windows computers via live-booting. You will need a USB flash drive or SD card for this.
can you link how to do that?
oh
nvm
ty
The latest version?
Just depends what pc you have
first thing i read was AMD and Problems lmao GG
!t checkra1namd
Hey @knotty furnace, have a look at this!
If you’re on AMD/Ryzen, you may be encountering a few issues when using checkra1n or palera1n. This can vary between freezes and straight up crashes. It’s because of AMD’s weird drivers that cause it not to work that well with checkra1n’s/palera1n's exploit. If you’re lucky you can actually successfully manage to jailbreak using checkra1n/palera1n.
Tips to increase successrate:
- Plug your device into your computer's motherboard.
- Use a genuine Apple USB-A to lighting cable.
If you’re stuck on the apple logo please force reboot yourself (see: /tag reboot).
If these don’t work, try to get your hands on another computer (preferably intel), and try to use checkra1n again.
ty
iphone 7 ios 15.7.5 which palra1n should use ? and how do i remove the old one
Hello, im new here. There is a jailbreak for iphone 11 at 16.0?
no
iOS 15.0-16.4.1 semi-tethered checkm8 jailbreak
palera1n is an iOS/iPadOS 15.0-15.3.1 semi tethered jailbreak based on the checkm8 exploit.
palera1n is able to jailbreak the device in fakefs-rootful ...
iOS 15.0-16.4.1 semi-tethered checkm8 jailbreak
palera1n is an iOS/iPadOS 15.0-15.3.1 semi tethered jailbreak based on the checkm8 exploit.
palera1n is able to jailbreak the device in fakefs-rootful ...
If only I could get it working on my iPhone X
i cant get the palera1n app to load on my phone
Wouldn't force restart but letting the battery die got it back out of dfu
it also hurts your batteries health. what device is it?
It's a 10
That's what I was trying but wasn't responding—it's all good now though
you have to hold it for 20 seconds
Could have been the case I wasn't holding it long enough, I'll keep that in mind
Any suggestions on alternative ways to bypass the 'Timed out waiting for download mode (error code: -status_exploit_timeout_error)' error?
Tried the unplug/replug tip but still doesn't seem to work
Alternatively—anyone know a way to update without using iTunes? Said fuck it to get out of recovery mode but now I'm stuck in " 'iTunes is downloading the software for this iPhone' limbo
So it can or cannot do 16.4.1?
thats not the palera1n download
idk what that is tbh
Gentlemen i have a problem
I keep getting walls and walls of write reset on my iPhone's screen
Send a pic if you can
Have you been jailbroken before or is this the first time?
I've jailbroken before
Checkra1n back in 2018 and tried doing palera1n with no avail
I was meaning, has that device been jail broken before
Okay. Your follow up message was a tad confusing.
You can try rebooting and jailbreaking again
I'll change devices and cable
If that doesn’t work you might need to restore rootfs/force revert (depending if you are rootful or rootless)
I did it
@silent anchor again
its been 15 minutes
it’s a re-jailbreak and it worked everytime so far with a intel processor (i think that’s why) and now I try on my pc (amd ryzen processor) it doesnt work
yea amd has a low success rate
So I have an iphone 8, I cant use applepay with jailbreak , but with iphone 7 I can ?
Yes
ok I need to buy an iphone 7
so what do I do?
!t checkra1namd
Hey @austere jacinth, have a look at this!
If you’re on AMD/Ryzen, you may be encountering a few issues when using checkra1n or palera1n. This can vary between freezes and straight up crashes. It’s because of AMD’s weird drivers that cause it not to work that well with checkra1n’s/palera1n's exploit. If you’re lucky you can actually successfully manage to jailbreak using checkra1n/palera1n.
Tips to increase successrate:
- Plug your device into your computer's motherboard.
- Use a genuine Apple USB-A to lighting cable.
If you’re stuck on the apple logo please force reboot yourself (see: /tag reboot).
If these don’t work, try to get your hands on another computer (preferably intel), and try to use checkra1n again.
what do i do if palera1n is stuck on booting pongos
What device ?
ipad air 2
Ctrl+C, Type Exit, re run Palera1n command
iPhone 6s, 15.7.5, no passcode. Run palera1n -B -f and stuck at this screen
Lowkey might make this my main phone
palera1n wont appear on the homescreen after jailbreaking. i tried 2 times
When jailbroken, apps can detect if your device has been jailbroken or jailbroken in the past, making you not able to open / not even use the application.
You can use certain bypasses to get passed these restrictions and use the app normally.
Submit a new bypass here or open a GitHub issue.
Use Apps Manager to reset the app before testing a new bypass tweak.
anyone can help me with this error pls
My guy got the hidden widgets
whats the tweak to customize settings app?
Yeah
Thanks for asking
Restore
No
Palera1n settings
You go to options
And Restore RootFS
I don't have a mac so i wouldn't know how
Windows PC
You flash it on a USB stick
Yup, make sure to disable secure boot in BIOS tho...
Github
It's out there
Glad i could help
Please help me. I have been stuck on this page for over an hour now. This is an iPhone 7+ running on ios 15.7.5. Thank you
A tweak called settingrevamp
Yeah 👍🏾
hmm, not working for me on ios 16
centered labels are working but not the organization
I have been able to jailbreak rootful but now sileo and Zebra isn't installing...I am getting "Install failed. status: 256"
Hello, trying to jailbreak iphone X 15.0.2 not working on mac or bootable usb following this guide : https://ios.cfw.guide/using-palen1x/ however am always receiving timeout error even if i unplug and plug again
A complete iOS modding guide, from stock to jailbroken.
I was not able to fix it trying several methods
Im using mac
with intel
Dopamine however works for A12 not A11
I tried it
It's frustrating how it get stuck on timeout always
is there an openssh i can download on sileo?
Can u tell me were is this text located on the channel ? thanks
i cant go to dfu mode on my iphone it restarts why
iphone x
windows
using palen1x
Thanks
are you using the correct cable?
i tried 2 cables
the 16.5 work on iphone 13 pro?
no
type a or c?
a
hmm, are you following the on screen instructions?
when i'm holding power + down it goes for the second step when i should keep holding the vol down
and here is the problem cuz the full 10 seconds go by and the apple logo shows on my phone and it says phone is disconnected and it all restarts
i changed the pc
i changed the cable
i searched every where it says the cable ..
kind of sounds like you are maybe doing something wrong. have you entered recovery mode first and then DFU?
yes it do that by it self once i connect the phone to the pc
but i will make sure how to do it right online
ty for your help
someone help me? I went to jaibreak palera1n but I didn't activate the fakefs option, after it ended I activated it and did, but it loads fast and when it ends palera1n doesn't appear
can palerain work for a13?
no
then anyway to jailbreak iphone 11 pro max with ios 16.4.1
Any ideas?
How do you guys install things on your jailbroken iphone because nothing is installing for me
what do you mean? tweaks show a red text or what?
wait hol up you can do that?
no, they were asking if they could
aw 😦 i have pretty much the sane but stock Iphone11
Is there a tweak I can use to downgrade my App Store apps?
Can I download trollstore and install AppStore++ with palera1n jailbreak?
do I have to erase all data and settings to jailbreak my iPhone SE 1st gen on iOS 15.7.5 with palera1n?
because when i try to do that it just stops on loading pengu OS
it loads and pc says that it detected pengu OS USB device but then nothing more happens
the guide says that only the devices with A11 and iOS 16 has to reset the device first, i have A9 with iOS 15
press ctrl+c and start again
I'm using Intel windows pc with ventoy usb
yeah do what i sent
Yeah I got it now, thanks
Is there a way to sideload apps without the 3 app and 7 days limitations on my setup?
sideload no, but you can install ipas that only work while jailbroken with appsync
Where can I get appsync tho, when I try to add the repo for it in sileo it throws an errer
what does the error say
This ^
you're on rootless, appsync doesnt support that yet
Oh
I suppose I cannot go to rootful yet right?
I'm sorry for the noob question but, what are the differences between rootless and rootful? Any major risks or disadvantages?
rootful either needs 10-15gb or 2-3 gb but supports more tweaks
Now I don't have sileo installed and when I try to re-install it says install failed status:2
But it says it's installed
is there an option to uicache
Restore and rejailbreak
You mean restore rootFS?
not more than a minute
does this work with iphone 13 ios 16.4
No
Every time I jailbreak with palen1x , and I go to install sileo or zebra, it gives me this error. I had just previously rootfs from rootless and then did fakefs and did rootful
I am trying to install a command prompt so I can use locsim but jailbreak doesn't allow me install anything on rootful or rootless because there will be a package that is only available to rootless or rootful. Please help me guys
What about iPhone xs max ?
I need help! anyone get an error: timed out waiting for device for download mode -Status_exploit_timeout_error
Or the error:
libirecovery error -3
Iphone X 15.0.1 - Palera1n universal
No
iphone 7 plus 15.7.3 jailbroken with palera1n
Suddenly rebooted and got stuck on iTunes Restore screen
Tried Force Restart, Reiboot, even rejailbreaking in safe mode but nothing worked
The phone won't boot into stock mode
Any suggestions?
Which jailbreak support iphone xs max ?
What iOS
No jailbreak
Which version does jailbreak support?
And which jailbreak does support xs max?
Sorry soo many questions
The latest jailbreak for A12+ is dopamine which supports 15.0-15.4.1
You aren’t able to downgrade though if that is what you are asking
hello, i try on two iphone x, one have ios 16.4 and second have ios 16.4.1, on 16.4 works palera1n ok, -c -f copy some files and working obout 5 min, on 16.4.1 no copy any files, working obout 30sec, after boot, -f booting about 5min and no palera1n app found..working on 16.4.1?
Have you ever had a passcode set? If yes, did you factory reset the phone?
what’s wrong here? how can I solved?
Yes
ok i try thanks
What version of Palera1n are you using?
the last
Try beta 5
The guide now prefers rootless, there is a rootful guide available
working, thanks, but i have problem, after jailbreak i cant activate phone, on wifi not working, over mac not working, how skip activate?
iCloud?
palera1n --force-revert -f not working
icloud remove before factory reset
I’m not entirely sure what you mean by “I can’t activate”
@elfin walrus can you send pic of the phone?
yes
Possibly a WiFi connection issue
no, working, on mac too working
i downloading original ipsw, i try restore, activate and again palera1n
not working :/
on mac say: iPhone "iPhone" cannot be synchronized. Received unexpected response from the device.
omg, working, sim inside, and lock, after reject sim out activate ok
Anyone having or use to have troubles with palera1n? waiting for device for download mode
Please send it
You’ll need to force-revert first https://ios.cfw.guide/installing-palera1n-rootful/
Guide to installing rootful palera1n
iPadOS 15.4.1 and ran palera1n -c -f as I’ve got 110gb free storage
Now it’s done but no palera1n app
Any ideas ?
Also, the shortcut didn’t work
hi guys, my iPhone SE 1st gen is respringing infinitely, is it because its just slow hardware and i might have installed too many tweaks?
i have the 16GB version
I have to re-jailbreak when it happens
Finally 🙌 using amd windows , after a lot of headaches
Ok will do
Just reboot and run process until you get palerain app, everytime you get stuck, just hardreset the device and run palerain again, before that i reset all settings
Yeah thats a bug of 1.0.9, and you cant fix it
hey
i’m getting a windows laptop for palera1n
do i need a 64 bit or it doesn’t matter
preferably 64 bit intel
no
And palera1n for iOS 16.4 A9
yeah but it gets stuck in PongoOS and it will never get out until I restart the device
idk whats happening

just keep trying
do u have face id/ touch id or passcode set
nope
no, but you can use MacDirtyCow
!t Cowabunga
What is Cowabunga
Cowabunga is an app that abuses CVE-2022-46689
Cowabunga IS NOT a jailbreak but allows you to use some jailbreak like features which includes but is not limited to: Springboard tweaks, custom lockscreen passcodes, themes without shortcuts, hiding dock, home bar, dynamic island, supervision etc.
Full feature list can be found on github
iOS versions it supports?
iOS 14.0-15.7.1 and 16.0-16.1.2
Warning: Some changes are permanent on iOS 14.0-14.8.1
Cowabunga is not a jailbreak, it does not include a package manager, it will not enable you to use any tweak
You can use Altstore, Esign, ipasigner, sideloadly, trollstore to install
Their discord server can be found at the bottom of the github page for support.
Yeah but I Need trollstore
You need to re run Palera1n when it gets stuck on PongoOS - known issue in Palera1n for A9 devices. Ctrl+C, type exit, re run the Palera1n command
is my iphone 12 ios 13.. jailbreakable?
the iphone 12 did not get ios 13
Hi. This is not my first time running a jailbreak but its my first time using palera1n and jailbreaking iOS 15. Currently after running the jailbreak for the first time my iPhone 7 plus is stuck on the boot screen. How do I fix this?
you dont need ts for mdc...
what's the best five icon dock tweak for palera1n 2.0.0
My iphone 13 on ios 12 how to crack
How to install kali linux
Can i jailbreak ios 15.6.1 ?
I’ve got a iPhone 11 would this work with 16.1.1
piss
what
And after rebooting the iPhone, palerain disappears?
the parela1n app itself has been deleted
do anyone mind helping me
help
i think i’ve screwed my jailbreak
i installed a package called libhooker-oss
and kernel panicked
now when i boot with palera1n safe mode, sileo says DPKG interrupted
the proceeds to kernel panick
can i fix it without starting over?
@silent anchor
that's weird, it panics in safe mode?
yeah
when i was installing libhooker-oss, it crashed during install
and now says dpkg interrupted
and then kernel panics
not sure, you could try switching to 2.0.0b5 to see if that works
Sileo and zebra
on my ipad in the palera1n app when i try to jb it has said downloaded sileo.deb for a good 10 minutes, what should i do
?
after doing a fresh run of palera1n to try to switch to rootless when i try to install sileo i get error status 512?
iphone se i did a fresh install of ios 15.7.5 still getting same error
xd, trying to run 1.0.8 version and see what happens 🙂
Soo, yea try it @steel spear
seems to be stuck at downloaded bootstrap.tar
been here for like 5 minutes already
oh okay, thanks!
That explains a lot.
same problem fml
palera1n static and strap are currently down, you may have issues jailbreaking or installing/updating packages. Please try again later.
yeah i screwed up, my jb was working just fine but i wanted to transfer to rootless bc the tweaks i use finally got updated to work on rootless. so to gain some useless features in palera1n. now i cant rejailbreak bc the website is down 😵💫
btw updating to beta 6 will cause a new error 256 dont try that
I’m getting error 512
still ^
is there anywhere i can get notified when they come back up? a twitter account or anything?
you can join the discord server from https://palera.in
twitter also exists (https://twitter.com/palera1n), not sure if they'll tweet about it there
is there any youtube video tutorial for installing palen1x to jailbreak an ios 16 device?
should probably remove the vx, this just redirects to the github
pfft imagine error 256
you could downgrade to 14 if you have blobs
installed beta 5 on 15.7.5 rootful, but no can't find substitute, any ideas?
same here, palera1n repo is down and it’s the one hosting substitute
installed ellekit in the meanwhile
oh thanks for the suggestion , I thought that it was for rootless, Im on rootfull 16.3.1, Ill give it a try .
Edit: yep that fixed the problem for me.
does palera1n strap fixed ?
update: cant install debs from filza , you'll get " Not running in Sileo. Trigger UICache bash-" all we can do is wait for palera1n repo to fixed , I tried finding substitute deb file but i failed
i was able to install debs from filza
do an uicache from palera1n app
see if it helps
I did that and I tried to rejailbreak, this is nightmare, I chose the wrong day to do a restore rootfs
apparently it installed fine but still showed that for some reason lol
does palera1n strap fixed ?
yes, but repo.palera.in still down, check pins
isn't this the second time the repo has died
I was sent here been trying to jailbreak my phone for hours but I was told I might have a fake jail break. I installed Painra1n through Peng8 store and ran it. But I can't ever get havoc repos to work with cydia and other apps.
I just want to watch netflix in the damn car haha
that is fake
@silent anchor
Your message contained the link to a fake jailbreak (pangu8.com).
If you installed this jailbreak, remove it from your device immediately and try to get a refund if you paid for it. Jailbreaks never cost money and will not ask for any form of payment or survey to install them.
see
It's a noob question but "after palera1n installation" what should I do next to get the tweaks(likes Apstore++, Filza, etc...) work?
- since palera1n repo is currently down, add https://mirror.palera.in/repo for now
- if on rootful, install substitute and preferenceloader
- if on rootless, install ellekit and preferenceloader
- make sure sileo is up to date, add https://repo.getsileo.app
- just search for the tweaks you want in sileo, many known repos will be offered to be added automatically
- for appstore++ specifically, use this one for now: https://github.com/CokePokes/AppStorePlus-TrollStore
btw people..... any chance to boot into jailbroken state after setting a passcode by mistake? or full wipe is the only option? (damn)
(iphone 8 / ios 16)
if you did it while in jailbroken state, it should be possible to rejb since it wouldn't have actually set it
yep, i did it in jailbroken state. once i set the passcode, the phone cold-booted (you know when there's pixels and artifacts on the screen as if you short-circuited it) .....
after that i tried >10 times to rejb it the usual way '-f'
but no chance
what should i do?
How hard is it to jailbreak iPhone 8 with 16.4.1 os
not hard but prepare to fail 2-3 times before you master the skill :)
check panic logs to confirm if passcode is the issue
hi
so
i cant say the modified version of youtube
in here
but basically checkl0ck crashes qnblackcats version of youtube
and choicy w substitute could stop checkl0ck injecting into youtube
i started over with my jailbreak
w ellekit
but now choicy cant stop checkl0ck from injecting into youtube
any way to stop ellekit from injecting?
@silent anchor
idk choicy should work, but you could try installing normal youtube from app store and uyou in tweak form instead of app
(uyou itself is allowed to be mentioned here just not the ipa form)
oh, how come?
the ipa is technically piracy under a strict definition bc it's redistributing the youtube app
oh true
this server has to be careful with discord tos especially since it's large and partnered
aight ill try the tweak, hopefully this works
can i suggest smth for the bot
i had typed out a huge message, and it just deleted it and didnt tell me my message
so i would have to completely re type it out
maybe add the flagged message to the bot's DMs
yeah @silent anchor choicy just doesnt work, i disabled tweak injection which should have also disabled uyou, but it still crashes
weird
does this mean anything?
actually choicy does fail on substitute as well
@nimble river i just tested myself, "launch without tweaks" and "disable tweak injection" on a per-app basis seem to be broken on palera1n rootless for me too, but if you blacklist/whitelist individual tweaks it seems to work
hmm, interesting
im trying to figure out which part of checkl0ck injects into youtube
and disable that
i dont want to completely disable checkl0ck however
how would you blacklist/whitelist individual tweaks? global tweak config?
either that, or under process configuration -> applications -> youtube
global would just disable a tweak everywhere
where is process configuration?
it's below global tweak configuration
the process configuration part is just heading text
below that there should be springboard, applications, daemons, etc
yeah thats what i tried
this doesn’t work
disable tweak injection also doesnt work
hmm
the crash log doesn't even seem to mention checkl0ck
if i turn off checkl0ck and respring youtube launches fine
it might be some hook causing an indirect crash, idk
yeah its odd cuz it worked last time i had jailbroken
wait holdup
now uyou is getting another crash
seemingly unrelted to checkl0ck
but the app form of uyou worked fine w checkl0ck disabled
lmao so i had to disable checkl0ck for every single youtube app extension
but then uyou itself crashes
💀
i wont use uyou rn then
this is the crash log with the app version, all tweaks disabled
@silent anchor
launch without tweaks on springboard works
but choicy doesnt
hmm
does the crash log say anything
not seeing anything obvious
hmm
Does anyone have Saunders tech in-depth tutorial on palen1x jailbreak? I can’t find it on YouTube
all palera1n servers back up
@silent anchor uyou launches with palera1n safe mode in app form
yeah its checkl0ck
i enabled disable tweak injection on youtube w choicy
and if i disable checkl0ck as well, it launches
how to fix the failed with status 403 ?
unsure
diff between fakefs and bindFs? Jail breaking 16.4.1 and confused
im on rootful and im using ellekit, having substitute causes random reboots every few days, a stuck apple when jailbreaking unless I pick "safe mode" while jailbreaking and click "do all" in palera1n to enable jailbreak, I did restore rootfs yesterday in attempt to fix it but it didnt.
rootful (fakefs): uses ~10-15 GB storage, maximum tweak compatibility
rootful (bindfs): uses ~2-4 GB storage, near maximum tweak compatibility, may break files app
rootless: uses ~100-200 MB storage, lower but slowly increasing tweak compatibility
BindFS = ~3-5GB, for 16GB devices or if u dont have a lot of space
FakeFS = ~10GB
oh nvm
alexia beat me to it
random reboots are usually a palera1n launchd hook issue and may happen with both substitute and ellekit
the safe mode thing not sure, i think latest ellekit is supposed to be fine but if not try downgrading it to 0.5.3
question
is autosign mandatory
i used to use it and it sucked
so slow
and now i dont use it
and nothing has changed
whats the point of AutoSign?
ah I see, the safe mode problem only with substitute tho, prolly I have a tweak that causing problem but im too lazy to do another restore rootfs
it's only needed for a few old tweaks that didn't update for the ios 15 signature format but otherwise don't need changes to work on ios 15
aight so i shouldnt need to use it?
shouldn't be needed unless you get killed 9 errors, even then you can just manually resign the problematic files with ldid in a terminal
!t reboot
iPhone 8 or newer (including all notched devices, iPhone SE 2020 and newer):
- Press volume up
- Press volume down
- Press and hold the side button for 10-20 seconds until the Apple logo appears
iPhone 7:
- Press and hold the volume down and power buttons for 10-20 seconds until the Apple logo appears
iPhone 6S/SE 2016/iPad 8th or older:
- Press and hold the home and power buttons for 10-20 seconds until the Apple logo appears
iPad 2018 iOS 14.4.1 ? Palera1n ?
checkra1n
Sorry 16.4.1
appsync was the problem
outdated version, get palen1x 1.0.9
error code -status_exploit_timeout_error
thx will try tomorrow.
hi there, i hope today's been kind to you!
please note that i have an iphone 7 plus, a10, on 15.7.5!
& i successfully did a rootless jailbreak via palera1n, then restored rootfs to revert, before trying a rootful jailbreak,
afterward, with enough storage, i tried a rootful with fakefs repeatedly via palen1x,
though, my iphone seems to boot normally without sileo or zebra installing,
even when trying to run on the latest palen1x, 1.0.9 & trying on 1.0.8,
may i please ask for any advice? & thank you for all your help, i appreciate it!
× update: solved, due to a misclick in palen1x options!
does palera1n support XS?
no
no, only A11-
Okay thanks
guysss
I cant jb with palen1x
I did same as the guide
but not work
both rootful with bindfs and rootless
ip6s 16gb bypas ios 15.6
15.6
I used palen1x 1.0.9, should I try 1.0.8??
thank you so much, please know i appreciate the information of not needing to downgrade & i was able to get appstore++ running today!
jailbroken but I don't see palera1n and sileo
palera1n only works on windows with palen1x
no, palera1n on iphong
iphone
even though my ip6s jailbroke, there isn’t palerain on it
Rejailbreak?
will palera1n work on ios 16.5 later this week (iphone 8)?
I did it 5 times
Palera1n works on 16.5
Then idk
If you used this tool to jailbreak then I can’t say I’m surprised Palera1n isn’t showing up. Use this guide: https://ios.cfw.guide/installing-palera1n/
Guide to installing palera1n
is little12 compatible with rootful jb?
I’m on IPhone 6S on MacBook Terminal..what I have to do now?
@timid pollen if you are on Windows use this guide https://ios.cfw.guide/using-palen1x/
A complete iOS modding guide, from stock to jailbroken.
Yes
Thanks
like i said earlier - if you are using that tool to jailbreak then I'm not surprised it doesn't work. Use Palen1x.
What is your device details ?
ip6s ios 15.6 16gb
both rootful with bindfs and rootles worked, but no palera1n icon in the phone’s home screen
@timid pollen did you restore rootfs at any point?
no
that could be your issue. open palen1x, set to rootful then select the restore rootfs option
idk what is it but I hadn’t do anything like that
after that switch to rootless, select force revert option
I’ll try
need to debug?
no. just select the restore rootfs option then click start
once it completes force revert on rootless as well
I will try
thanks for your help
wait a sec
that is rootless right?
how about rootful with bindfs?
rootful = restore rootfs
rootless = force revert
(iirc - haven't used palera1n rootless myself)
After jailbreak the iPhone 6s continue to restart and palera and sileo disappared…wifi don’t work too
How can I solve??
no - you are currently restoring the file system to it's previous state. You will have to jailbreak again after using either rootless or rootful
Is there any way to get Cydia on the 15.7.x Pailra1n exploit? Sileo kinda sucks.
how does it suck
is their openSSH in sileo ?
iPhone 7, iOS 15.7.5, palera1n on a hackintosh. Timed out 4 times in a row at the download stage, tried 2 USB-A cables
What now ?
unplug and replug when that happens (you can actually do that as soon as the apple logo shows up, no need to wait for the timeout)
oh, that actually fixed it. Thanks
its on procursus yes
hello, can somebody help me how i can restore my iphone? I accidentally want to put palera1n into iphone 11 but later on I found that it not support. now my phone is in DFU mode and I have no idea what I can do. thank you so much
you most likely won't have to restore it, just reboot
is it in recovery (showing support.apple.com/iphone/restore) or dfu (black screen)?
recovery
just do palera1n -n
if you're on palen1x, go to shell first and then type that
if on linux, might have to use sudo
wow you are amazing i was looking for that abour 3hrs
what do you want explained
no, the closest thing is blobs but those have restrictions
How the SSV seal breaks usually
Well, I keep trying to install packages, but the 'download' button just doesn't show up. I've followed the jailbreak using the rootless method, and this has happened 4 times now, so i'd rather just stick with what I know.
well when you mess with the snapshot there's a chance it won't be reverted properly and will get your device stuck in recovery
does the package say "Add Source"?
so you find a package, tap "Get", and it doesnt do anything?
i wrote in terminal palera1n -n but my iphone restarted and its still in recovery
oof, that's weird, looks like you're gonna have to update it from itunes/finder then
not sure how that happened to you, palera1n shouldn't have caused that by just entering recovery on an unsupported device
it literally didn't even try to send any exploit payload or anything at that stage yet, not that it would do anything on a13
well, normally it shouldn't happen unless the rootfs snapshot is explicitly modified by something, but there is some unknown thing causing it to break randomly on palera1n sometimes - all we know so far is that the rootfs snapshot disappears and some files from the rootfs also disappear, but no common cause found so far, it just happens sometime while the device is booted and then triggers a recovery loop once it's rebooted for whatever reason
I see thank you !
And is it possible to backup an image of an IOS ?
does it happen with every package or just specific ones
seems i can't jailbreak with palera1n in iOS 15.7.5 . . . and i don't want revert to ios 14
any suggest?
blobsaver has reportedly gotten people stuck in recovery, so it could be similar to that
stuck as in they tried exiting recovery too?
you can backup a full disk image if jailbroken but you can't exactly restore it as-is bc of sep anti-replay token and such
and a disk image of /var (user data) would probably be useless bc encrypted by sep, you're better off doing a file-level backup of that while unlocked
So i can backup but can't restore ?
Ohh
Forgot what i said
And is thsir any tool to do a full disk image backup ?
Or how do it ?
there isn't really a dedicated tool for ios since it's not terribly useful, but you could do it manually using dd or something
Dd ?
something like ssh root@IP "dd if=/dev/disk0s1s1" > rootfs.img may work to back up the root filesystem for example (on ios 16, that would be disk1s1)
That is usefull thanks !
And when i restore it let's say someday
How do i do it via itunes ?
If i broke something
i just told you that you can't exactly restore such disk images because of the anti-replay token... so it's only really useful for research, you'd still have to either restore to a signed version normally or use futurerestore if you have blobs and the sep/bb/etc is compatible
Futurerestore solve the issue somehow but with compatibility
Thanks for your help
And explanations
is there a guide to jailbreak iphone 8 ios 16.4.1 with windows?
!t palen1x
Hey @strong pond, have a look at this!
palen1x allows you to use palera1n-c on Windows computers via live-booting. You will need a USB flash drive or SD card for this.
Help ! Lol ......I get this error message , trying to jailbreak using the above methods with palera1n, anyone any idea why , and how to fix it please 🤔🙏🏻🙏🏻
!t checkra1namd
Hey @untold dawn, have a look at this!
If you’re on AMD/Ryzen, you may be encountering a few issues when using checkra1n or palera1n. This can vary between freezes and straight up crashes. It’s because of AMD’s weird drivers that cause it not to work that well with checkra1n’s/palera1n's exploit. If you’re lucky you can actually successfully manage to jailbreak using checkra1n/palera1n.
Tips to increase successrate:
- Plug your device into your computer's motherboard.
- Use a genuine Apple USB-A to lighting cable.
If you’re stuck on the apple logo please force reboot yourself (see: /tag reboot).
If these don’t work, try to get your hands on another computer (preferably intel), and try to use checkra1n again.
Holy shit thanks , i pluged direct into motherboard instead of via usb port and it worked straight away thankyou 👌😁
i had to stop running it after leaving it running for half an hour lol
Uh is this bad?
can u share the default repo pls?
Wdym?
go to sileo
Sources
there find Palera1n rootless repo
hold on it and copy
paste here
it’s like default repo
What’s that ?
tweak
No I don’t think
@silent anchor i just randomly started getting respring loops, which crash log would the crash be in?
look for springboard or backboardd
will do
here it is
latest i believe
@silent anchor anything standing out? only tweaks i installed today (from what i recall) is OTAEnabler, and cask 3
crash happened during youtube
but it gave me a respring loop
and eventually crashed my phone
oh and AppIndex as well
it sounds like something is causing springboard to hang, not sure what though
hmm
youtube issue?
honestly i think i give up with uyou
oh wow another crash
i wonder if its AwesomePageDots interfering with Atria
nope
i think i found it
i install shuffle instead of settingsrevamp earlier
because settingsrevamp wasnt working
i think shuffle is crashing it
could also be violet
Tried multiple cables all usb A even different usb ports lmao. Went as far as to completely reset the device and still nothing get it past those errors
what device
only ever seen that error on devices not supported by palera1n
iPad mini 4 iOS 15.7.5
Amd64
Should be all the right stuff? Definitely disabled secure boot as well
I discover system exploits for company’s for a living you’d think I’d be able to jail break this old iPad 😂😂😭😭
could maybe try entering dfu mode manually (plug it in, hold both home button and sleep button for 10 seconds, then let go of sleep button and keep holding home button for 10 more seconds)
then maybe it'll pick it up
the first steps that palera1n and palen1x do are guiding you to enter DFU mode by telling which buttons to press at which times, so if you enter DFU manually without the instructions then it'll just pick up at the next step
Hello, can anyone help on to connect SSH using filezilla to the iphone (Sileo)
sftp
im getting UNIX authentication refused
on cmd
unix user 
is there a youtube tutorial for palera1x with ventoy? couldnt find any
how long should the kernel boot for?
mines been booting for 4 minutes
nvm it works
but where is the palera1n loader app?
Any idea ?
login as mobile
It works thanks,