#palera1n
1 messages · Page 42 of 1
do sudo idevicepair pair, trust computer on device, then do sudo idevicepair pair again
it says
when i try it
Is substitute no longer on pelara1n and if so what’s the alternative
my terminal isn't working
on palera1n
how do i re-bootstrap?
sileo/zebra wont install
or, is there a way to reinstall all procursus/strap packages?
and if that doesn’t work or can’t happen, how do i re bootstrap with palera1n
rootful, iOS 16.1
Hello, do you recommend updating 14.2 to 16.4.1 and use Palen1x?
Damn, how can I become a jailbreak developer? How do I start. I want to contribute to these magnificent tools
#1090168975251492996 message read all this
hey guys, it’s been a while since i’ve jailbroken my devices. is there currently any tweak or tweaked app to remove ads from hulu with palera1n
Ok so after many tries i eventually jailbreak my 6S ios 15.7.5. but its a rootless jb, how do i do the tethered jailbreak?
Every time I try jailbreaking in rootful my phone gets stuck like this until the battery dies
Palera1n is a semi-tethered jailbreak. I’m assuming you were meaning rootful?
You are trying to create fakeFS over an existing one. Drop the -c flag and just use -f
Take a look at this info in palera1n, and this jb is done with palerain-macos-universal.
And when i try to jb with palera1n 2.0.0 beta 6 on ip 6S ios 15.7.5? the jb goes as far as to the git clone but when i try to do the jb with tweak support i got an error ”zsh: no such file or directory: ./palerain.sh
Hi i have a iphone x running ios16 it is icloud locked can palera1n remove icloud lock?
v16.0
!t icloudbypass
Hey @cold gull, have a look at this!
Discussion of iCloud/Activation Lock/passcode/MDM (Mobile Device Management) bypass, asking how to do it, or posting about it is not allowed. No, it doesn't matter if the phone is yours or not. We will not help you with it. If you do own it, it’s recommended to use the links below.
If you forgot your Apple ID - Apple Support
If you forgot your Apple ID password - Apple Support
How to remove Activation Lock - Apple Support
If you forgot the passcode on your iPhone, or your iPhone is disabled - Apple Support
Use this guide https://ios.cfw.guide/installing-palera1n-rootful/
Guide to installing rootful palera1n
?
This answers your question. #palera1n message
Can i use this with palera1n v2.0.0 beta 6 on ip 6S ios 15.7.5?
sole tf does that mean g don’t forward me a link let me know if it is possible
Read the damn thing
It contains your possibilities
Yes
@silent anchor You will need to force revert first with Palera1n.sh let me see if I can find the command
sudo ./palera1n.sh --restorerootfs IOS_VERSION
At what point do i enter this command in terminal?
Before using that new guide
I did the jb but palera1n not installed
Hi, I have a Iphone X on ios 16. Is there any way to add the password back?
Checkl0ck or fakepass
Did the app install? It can take a few mins to appear
I’m re-jailbreaking and this is what is happening, going very slow
I have never saw that error before. Are you using the correct cable etc?
Yes i am, how can i stop this and try again?
Ok i restarted the phone and its fine but not jailbroken
It got stucked here everytime, i’ve to clear terminal and try again for it to continue
I am asking if palera1n can remove icloud lock like checkra1n does because i forgot password to my icloud account
Dawg, don't be dumb. If you would read the damn thing you would see this.
Discussion of iCloud/Activation Lock/passcode/MDM (Mobile Device Management) bypass, asking how to do it, or posting about it is not allowed.
ratchet bro just dm me if its against the rules the owner wont find out

I got past the screen
When I’m rejailbreaking my device do I just click start and let it do it’s thing ?
Yeah I wonder why you get a warning
fuck around and find out
Biggest brain

@cold gull politely shut up about slurs and iCloud bypasses before the bark turn into bite
On Palen1x? Yes
Thank you
W mans
I haven’t jailbroken a phone since iOS 11 days it’s so different to me
A lot has changed since then
Facts
Gotta usb to jailbreak now is insane
Told me “timed out waiting for download mode”
Did you put the phone into DFU?
Yes I did
Gonna try again tho
Let’s see
Okay it’s working I got scared ngl
It’s telling me to press enter to quit
I assume stage 1 is done ?
What will happen if i jailbreak iphone x with set passcode on palera1n
it won't work
I don’t know but basically you need to disable passcode to jailbreak it
it being the jailbreak
Do I have to wait 10-20 min for all the white codes to disappear then do stage 2?
Or part 2 of the jailbreak*
What does the white text say?
It can take up to 10 mins for the fake/Bind FS - after that your phone should boot and then a few secs later the palera1n app will appear
Okay 👍
You are trying to create fakeFS over an existing one again..
😳
Did you restorerootfs on palera1n.sh?
I have no idea what that means
But I hope so
I was just following the YouTube video guide
I guess it’ll reinstall the file system hopefully nothing goes wrong
Oh sorry, i'm was chatting to someone else about this earlier
You were jailbroken before, right?
And you are using Palen1x?
Was force closing filza etc
Yes
Did the ventoy stuff etc dfu mode and now white coding waiting for that to finish
Okay cool, so open the Plaen1x setting and make sure all option are unticked
Gotcha !
Shoukd I do that after the white coding is done and goes back to the Home Screen
You can just force reboot
It won’t create any problems will it
No
Okay so ima force reboot and this time untik all the options and then start
Is that correct
That is
My bad about that - got you confused with someone else with a similar problem earlier
!t reboot
Hey @frigid sierra, have a look at this!
iPhone 8 or newer (including all notched devices, iPhone SE 2020 and newer):
- Press volume up
- Press volume down
- Press and hold the side button for 10-20 seconds until the Apple logo appears
iPhone 7:
- Press and hold the volume down and power buttons for 10-20 seconds until the Apple logo appears
iPhone 6S/SE 2016/iPad 8th or older:
- Press and hold the home and power buttons for 10-20 seconds until the Apple logo appears
very unlikely
does jailbreak bypass activation lock ?
!t icloudbypass
Discussion of iCloud/Activation Lock/passcode/MDM (Mobile Device Management) bypass, asking how to do it, or posting about it is not allowed. No, it doesn't matter if the phone is yours or not. We will not help you with it. If you do own it, it’s recommended to use the links below.
If you forgot your Apple ID - Apple Support
If you forgot your Apple ID password - Apple Support
How to remove Activation Lock - Apple Support
If you forgot the passcode on your iPhone, or your iPhone is disabled - Apple Support
ohk no worries i have proof of purchase but yeah can’t seem to get past it unfortunately i’ll keep searching lol
you can just contact apple then
they will unlock it for you
Learn what to do if you see the Activation Lock screen on your device, or if you're asked to remove Activation Lock on a device that's offline and not in your possession.
yeah i have emailed
Hey guys can any one tell me why my iphone x cant enter to DFU mode while im jailbreaking
I did the jailbreak but getting this error when installing sileo
Ah, this is due to a few issues with the latest update
!t palera1n256
Status 256 in palera1n loader
palera1n beta 6 has introduced many changes that include a bunch of loader related updates, this error may be related to not being able to force install package managers over existing ones.
Additionally, this error will occur if attempting to initially jailbreak using rootful palera1n
Most users should just use rootless palera1n instead (as it offers many benefits compared to rootful palera1n, and tweak compatibility for it has become very decent). If you do need rootful palera1n, however, you can use palera1n beta 5 and wait for the team to fix the issues in the next beta, though beta 5 does not support iOS 16.4 or newer
So i need to re jb with beta 5?
Yeah.. the joys of modern day jailbreaking lol
One other thing do i need to run restorerootfs first?
Uhm, I don't believe so. You should be okay to just run palera1n as the FakeFS already exists
Any idea why do NewTerm and MTerminal break when installed?
After re-jailbreaking with beta 5 Trying to install sileo
Got palera1n back , thanks for all the helps
Could be a Wifi issue
Any tweaks that actually work on iOS 16?
@prisma swift can you change the channel topic to say 15.0 - 16.4.1

i don’t think i can
on the new UI
just disable it 
looks like you can go to the channel list and long press it there and edit channel
but where tf does it show the topic now outside editing lol
So i restore and re-jb my phone with palera1n beta 6 but still getting the ”status 256” error
!t palera1n256
Hey @silent anchor, have a look at this!
Status 256 in palera1n loader
palera1n beta 6 has introduced many changes that include a bunch of loader related updates, this error may be related to not being able to force install package managers over existing ones.
Additionally, this error will occur if attempting to initially jailbreak using rootful palera1n
Most users should just use rootless palera1n instead (as it offers many benefits compared to rootful palera1n, and tweak compatibility for it has become very decent). If you do need rootful palera1n, however, you can use palera1n beta 5 and wait for the team to fix the issues in the next beta, though beta 5 does not support iOS 16.4 or newer
Are you using the rootless jb?
Not currently
I just dont know much about the rootless jb an if i really wanna go with it, i mistakenly installed it and sileo installed on the phone without a problem but my sources wont load in sileo, not sure if it was because of the rootless
The simplest explanation of rootless is this - you cannot read/write to the root file system. Due to this many tweaks aren't compatible as the file directory is completely different and will need to be updated in order to support rootless. Sileo will only display tweaks which have been updated to support - this should explain why your repos won't load.
I went with rootful, seemed like the right choice at the time, won't change it though, only if and when it breaks lol
how do i remove the palera1n jailbreak ? i followed multiple videos to do this but it doesnt work
nvm i finally got hte revert install to work
Hey guys can any one tell me why my iphone x cant enter to DFU mode while im jailbreaking
are you using a usbc cable
iam using a usbc cable and it works
99% of usbc cables dont work to enter dfu
mine is successfull tho
i can jailbreak my phone again
to show you
ok i just jailbroke it again
with a apple usbc cable
perhaps my cable is the 1% lol
my iphone is stuck in dfu mode and i get error code 2005 is there a solution?
Does anyone know how to get the palera1n app icon to show up after re-jailbreak? I disappeared and I don’t get to make it appear even if I re-jailbreak again
Don’t use that tool...
How are you rejailbreaking?
@still idol
@delicate veldt try a force reboot to get out of DFU
From a terminal using my mac
Using the -f option.
how?
!t reboot
Hey @delicate veldt, have a look at this!
iPhone 8 or newer (including all notched devices, iPhone SE 2020 and newer):
- Press volume up
- Press volume down
- Press and hold the side button for 10-20 seconds until the Apple logo appears
iPhone 7:
- Press and hold the volume down and power buttons for 10-20 seconds until the Apple logo appears
iPhone 6S/SE 2016/iPad 8th or older:
- Press and hold the home and power buttons for 10-20 seconds until the Apple logo appears
Hmm, try rebooting and running palera1n -f again
Ok will do
iphone 8 ios 16.2
So I did the jailbreak, and it says there should be a palera1n app but I don’t see it
Im using paler4in jb, one app is crashing. I have tried hestia, shadow, choicy, unsub. It just crashes the app. When i un jailbreak(restart) it works. This app is usefull for me so to use it i restart my phone. I need help i can share the log too.
Which takes up less storage space on a device? Fake fs or partial fake fs?
Please help 🙏
@hard berry If you still don’t see it go into Shortcuts and create one to open an app and you may see the palera1n app in that list! And then run the shortcut and then after that the app should show up on your HS
Anybody got a good collection of tweaks
Or is there a good repo with a bunch of good tweaks
rootless (~200mb) < bindfs (2-3gb) < fakefs (10-15gb)
I need to be able to install 3rd party apps on iOS 16.5
That’s not possible - The package would fail to install
rootless tweaks have the iphoneos-arm64 architecture while rootful has iphoneos-arm
Haven't looked back since
!t rootless
Rootless means you cannot write to the root filesystem, only leaving /var and /private/preboot being writable. Semi-untethered jailbreaks such as Fugu15/Dopamine must be rootless while semi-tethered jailbreaks can simulate a rootful installation by creating a clone of the existing root filesystem. Current semi-tethered jailbreaks such as palera1n have the option to be rootless anyway.
What does this mean for the average user?
Tweaks would need to be updated to support iOS 15, check if the tweak you’re installing works on 15. Not all tweaks will work out of the box for iOS 15.
XinaA15 is currently an exception as it has a compatibility layer for non-rootless tweaks. Some tweaks need to be updated specifically for this jailbreak.
Does palera1n work on an iPad 5th gen running iOS 15.6.1
Fakefs
yeah
Thats what i just said
They asked which one uses more storage
Oh I see why you said FakeFS. They said less storage though
🤣
can someone tell me why on the official guide they dont talk about the FakeFS ?
ok now i got it
but i didnt really understood the difference between rootless and fake fs
I have ssh server error
like if I just want to use tweaked IPA's, do I need fakeFS or rootless is enough?
With ui cache loader shortcut
SSH error please help
Palera1n beta 6 come an error wile I will install sileo or zebra any solution?
Only on A11 devices
!t reboot
Hey @silent anchor, have a look at this!
iPhone 8 or newer (including all notched devices, iPhone SE 2020 and newer):
- Press volume up
- Press volume down
- Press and hold the side button for 10-20 seconds until the Apple logo appears
iPhone 7:
- Press and hold the volume down and power buttons for 10-20 seconds until the Apple logo appears
iPhone 6S/SE 2016/iPad 8th or older:
- Press and hold the home and power buttons for 10-20 seconds until the Apple logo appears
Palera1n beta 6 come an error wile I will install sileo or zebra any solution?
Yeah, the guide now prefers rootless over rootful. There is a rootful guide but tbh, rootless is the way to do
256?
Yess
Yes
!t palera1n256
Hey @silent anchor, have a look at this!
Status 256 in palera1n loader
palera1n beta 6 has introduced many changes that include a bunch of loader related updates, this error may be related to not being able to force install package managers over existing ones.
Additionally, this error will occur if attempting to initially jailbreak using rootful palera1n
Most users should just use rootless palera1n instead (as it offers many benefits compared to rootful palera1n, and tweak compatibility for it has become very decent). If you do need rootful palera1n, however, you can use palera1n beta 5 and wait for the team to fix the issues in the next beta, though beta 5 does not support iOS 16.4 or newer
Creat FS It does not complete downloading all files?
My phone is doing a reboot in the middle of downloading
In terms of tweak compatibility rootful is better but that shouldn’t sway your decision. Rootless support is coming along quite nicely and imo it is much more user friendly
Have you ever had a passcode set?
So you haven’t ever set a passcode on your device?
I don't put any password
No Face ID either?
no
Ok, did you set fakeFS?
Yes
Soo you used palera1n -c -f ?
Are you able to take a picture of the text on your phone and send it here?
Same problem but my device is iphone x ios 16.4.1
,
Which guide are you using?
windows

What are you using to tell you what to use?
@silent anchor
Is it a video or a written guide?
,
@silent anchor okay, don’t do videos. They aren’t ever very useful. Use this guide
!t palen1x
palen1x allows you to use palera1n-c on Windows computers via live-booting. You will need a USB flash drive or SD card for this.
ok i will try thank you
Np
'
he said it few times before
@silent anchor
ok tnkx
I have done the steps but the plalar1n app is not showing up
🥲
What now
It’s Palera1n - if you don’t see it then it probably hasn’t installed. Are you certain you haven’t ever had a passcode set?
All you can do is try again then
with new downloads, are they set to be added to the home screen or to the library?
I didn't understand
What is yours set to?
ah ok cool, how many times have you tried doing it?
?
rejailbreaking
im attempting to jailbreak my iphone SE (2016) with palera1n and its been on the pongoOS boot screen for almost 15 minutes now, this has been attempted 3 times now
iirc the iphone is on ios 15.2 beta 3
Oh oops 😭
I just re read their message
can someone help me with the install of this on my ipad 7 16.3
cuz its stuck at booting messeg in the therminal on the ipad
Did you follow the steps for A9 devices?
Send a pic if you can
Of the text on screen
.
skill issue
Palar1n not work on iOS 16.4.1
The only possible explanation is that your device had a passcode set at some point in time
it works
I have removed all passcode
And did you factory reset the device? (You can restore from a back up after)
I downgraded to version 16.4.1 to do the jailbreak
today
But it doesn't work😭🥲
?
Should I do a factory reset again?
@silent anchor could you send the latest panic log the device has by chance
Whare
I didn't understand
What is panic log
?
Go to Settings -> Privacy -> Analytics and Improvements -> Analytics Data
when do I have to restore the backup on my phone?
I think i have to do it before the jailbreak but the restore will bring back my passcode no?
I can’t send file here?
you should be able to
no it won't, just make sure to not set a passcode during setup if it asks you
Yes
yea this is a passcode issue
you can never set a passcode at any point after erasing, not even during setup
Do I have to do a format?
what tweaks are best recommended for pokemongo on palera1n?
?
?
Does it have to be formatted so that I can remove the file passcode?
you have to remove the passcode, format, rejailbreak, DO NOT add a password.
Ok thank you❤️
I wasn't replying to you, but ig ill reply to help you too
you have to restore before you can jailbreak
That was there panic log - the other person added .txt to it and reposted it
Can I format from here
no
Computer
you need to restore from itunes iirc
Ok
but
also
iirc, you cannot use a backup
so you'll have to redownload everything
and also, it wouldn't be a terrible idea to remove your phone from your icloud account before you restore, so that you don't have to worry about remembering your icloud creds
ok thanks but will I be able to set a passcode after the jailbreak?
only with [[fakepass]]
@silent anchor you can just erase all content and settings
no need to do another complete restore
wdym?
it's a tweak
you can have a "passcode" set with it, but it will go away if the phone is rebooted to unjailbroken state
that's the best you can have on iphone 8/x with checkra1n/palera1n (except ios 13 and below)
How from iPhone settings or computer
oh so i can still use third party apps to set a passcode on lockscreen
iphone settings
oh, that does work?
okay
Yes
this is why I personally picked up a 7+
doing it from a computer also works but is slower and forces an update
ok nice
I forgot, can they use a backup? I assume no
yes
they can
they can (as long as it doesn't somehow re-add a passcode)
There is fakepass (which i think is free?) or Checkl0ck which is paid
@silent anchor
the backup itself won't re-add a passcode, it will prompt you if you want to set one
oh okay
at most it might ask for your old passcode to decrypt stuff from the backup but won't force it on
and these tweaks are compatible with rootless jailbreak?
fakepass is free
Thank you❤️
yeah but apparently with rootless jailbreak method, some tweaks dont work so I asked so maybe ill switch to rootfull
FakePass is afaik
ok so let me be clear on this:
- all tweaks do need to be updated
but - many tweaks (that work on 15/16) are already updated
ok so it depends on like the ip4st0r3 i use
what
sorry idk why the 1PA ST0RE word is banned
dumbass
filter bypassing is worse than getting filtered, just saying
also it's filtered cause it's piracy
yeah, why?
^
but tweaks are not piracy?
what
read the piracy rule please
ok
you aren't making any sense
Depends on the tweak
on this subject why is the jb beginning with 'F' is filtered?
U mean the one for iOS 11/12?
yeah
oh ok and all of the [filtered] are piracy? it does not depend of which [filtered] it is?
it's a copy pasted jailbreak
Well piracy either counts as a paid tweak that is free on another repo, a tool to download paid tweaks for free, tweaks that unlock premium/paid features for free and everything iCloud bypass related
From u0 or chimera?
the more you know aye
Cuz I tried it once on my old phone and it ran much more stable and better than all the other available jailbreaks did
ok thanks
does anyone know if it is normal my backup restoration takes 7 hours? (i located my backup on an external usb drive so maybe that's why it is slow)
Now it’s done?
is this right?
@silent anchor you erased settings? Now try jailbreaking
ok
Its stuck here and doesn't do anything
After restarting the ipad then i can't find the app
I already tried like 7 times again
Can anyone help?
idk when but i know that there is a moment when the code seems to stop but actually you have to wait 10-20minutes because it's still working
maybe it's here
which jailbreak method do you use?
oh so you waited and it worked?
i was talking about this problem
Yes i left it like that and it started the ipad but i cant find the app
ok nice and now you just have to wait and it will appear
try finding it with shortcuts
Which guide are you using ?
❤️ Subscribe to my Call Of Duty Mobile channel: http://youtube.com/c/Saundery
😃 Help support me, by clicking my Amazon Affiliate Link before shopping: http://saunders.gg/amazon
🙌 Connect With Me:
- Help Me Reach 50K Followers on Twitter! http://twitter.com/SaundersTech
- Join My Discord Server (NO RULES): http://saunders.gg/discord
- iMessag...
This one lol
.
that did the trick, i failed to read that box. another issue im having now is whenever i click "sileo" to install, the palera1n app crashes each time, same with "zebra"
!t palera1n
nvm please disregard my message, i was offline. this phone has no sim card
Ii have palerian installed on my flash drive and booted in to that and then followed all the tings it said i had to do
Guide to installing palera1n
@daring terrace so the video you are watching is focusing on Rootful, whereas the guide prefers rootless. Which would you rather use?
(Rootful or Rootless)
you can either date the mum or the daughter lol that's a joke about the differences 😂
!t rootless
Rootless means you cannot write to the root filesystem, only leaving /var and /private/preboot being writable. Semi-untethered jailbreaks such as Fugu15/Dopamine must be rootless while semi-tethered jailbreaks can simulate a rootful installation by creating a clone of the existing root filesystem. Current semi-tethered jailbreaks such as palera1n have the option to be rootless anyway.
What does this mean for the average user?
Tweaks would need to be updated to support iOS 15, check if the tweak you’re installing works on 15. Not all tweaks will work out of the box for iOS 15.
XinaA15 is currently an exception as it has a compatibility layer for non-rootless tweaks. Some tweaks need to be updated specifically for this jailbreak.
Does it work on my phone? I got a iPhone 12 Pro Max running 16.3.1
Rootful has more tweak support rn but rootless is catching up. It is also more user friendly imo
No way to downgrade
umm both? XD
rootless
what someone earlier said that rootless was more user friendly
okayyy<3
I was also saying rootless was more user friendly?
no you said rootful
Any jailbreak available for iPhone 12 Pro Max?
you said rootful was more user friendly so why you guys are saying different opinions?
because someone else said that rootless was more "user friendly"
When did I say that?
Oh shit, my bad. Only realised that I messed my message up! I was meaning rootless - let me correct that
np
i think he meant:
Rootful has more tweak support rn but rootless is catching up. It is also more user friendly imo
okok thanks
Exactly what I was meaning. Have corrected those messages
thanks
what do I have to do after the whole jailbreak process is completed? like i cannot set a passcode, i think that i have to re-jailbreak every time i restart my phone (im not sure of this) and is there any other rules?
yeah palera1n is semi-tethered, meaning you need to re-jb on every reboot
You can’t set a passcode but there are tweaks to enable a passcode (will disappear on reboot). And yes, if you reboot you will need to use a computer to rejailbreak
okok
very basic question but when I downloaded a tweak in sileo, where do i open it
dumb question maybe but it doesnt show on home screen
depends
some have an app, some only show in settings and some don't show anywhere at all
i don't really know what tweaks work with rootless that have an app
but probably snowboard?
[[snowboard]]
snowboard??
[[snowboard]]
Canister has been been dead for a little bit
do /package
whatever i’m going to sleep
oh
well that would explain it then ig
so what is snowboard
okok maybe it wasnt compatible with rootless
that is possible
Are there any special-case issues going from 14.3 unc0ver jailbreak to 16.4.1 palera1n? Would a factory reset and update, clear unc0ver and cydia data?
what device?
iPhone X global
so
password needs to be disabled
permanently
rootfs on unc0ver
upgrade to 16.4.1
and follow this guide: https://ios.cfw.guide/installing-palera1n
Guide to installing palera1n
rootless is also an option but rootful has better compatibility
BindFS is also an option
Just to let you know, this guide is for rootless. There is a different guide for rootful
oh really? i thought installing-palera1n-rootless was for rootless
could you provide a palen1x link and a rootful link please, thanks
Oh wait, mb that link is correct 🤦🏻♂️ I’m far to tired for this
Hang on. I was correct the first time - god damn my brain is not working right.
This is rootless - https://ios.cfw.guide/installing-palera1n/
Guide to installing palera1n
This is rootful - https://ios.cfw.guide/installing-palera1n-rootful/
Guide to installing rootful palera1n
rootless is now prioritized over rootful, so the guide put rootful in a separate page
ah
i’m thinking of switching to rootless
i’ve asked this about 10 times and no answer
how can i fix this
how do i re bootstrap, as that may fix it
@warped horizon would you happen to know?
to switch to rootless and delete the fakefs/bindfs just do --force-revert
!t rootfs
To revert the jailbreak on your device, follow the steps below.
unc0ver
Reboot the device then open unc0ver. Tap the gear icon and enable the "Restore RootFS" toggle, then tap "Restore RootFS" at the main screen.
Chimera / Odyssey/ Taurine
Reboot, open Chimera/Odyssey/Taurine, toggle on "Restore RootFS", then tap "Jailbreak".
checkra1n / Odysseyra1n
Open the checkra1n app on your home screen and tap "Restore System". If the icon has disappeared or you get "Restore Error: General", reboot and re-jailbreak.
palera1n
Go to your palera1n folder and type ./palera1n.sh --restorerootfs, then do ./palera1n.sh clean.
palera1n-c
Rootful (default): palera1n --force-revert -f
Rootless: palera1n --force-revert
If the above methods didn't work, see /tag rootfscli for more options.
yeah but i’m trying to figure out
how to fix that error
almost all my tweaks are updated
not all tho
so how do i re bootstrap
with palera1n rootful
or any way to fix that error?
Hi sorry guys a bit confused about the steps when jailbreaking on windows since i see the links mention linux or mac, saw a video but it was for rootful i think and wanted to ask what are the differences when doing rootless do you still create fakeFS or?
Also -palera1n
how do you remove palera1n 2.0.0 b6? is it the same way as removing the old tethered version. ping me if anyone responds
Add Repository: Sileo • iOS Repo Updates
i have an ipad 5th gen that has like, 14gb free on it, and everytime i try to install pailra1n with pailn1x rootful, it always just stops loading and freezes up with no error codes. am i doing something wrong? I wait like 20 min each time between each one
If you're unable to restore rootfs the normal way, you can do it from a terminal (e.g. NewTerm or SSH).
If your device terminal prompts you a password, its gonna be alpine
unc0ver
Install Snappy from your package manager, then open a terminal and type su root -c 'snappy -o', then reboot.
Odyssey / Taurine
Open a terminal and type these commands:
sudo snaputil -n orig-fs $(snaputil -o) /
checkra1n / odysseyra1n
Open a terminal and type su root -c '/binpack/usr/bin/snappy -o', then reboot.
With checkra1n 0.12.3 or above, you can also restore rootfs from your computer:
- macOS:
/Applications/checkra1n.app/Contents/MacOS/checkra1n --force-revert - Linux:
sudo checkra1n --force-revert - Odysseyn1x: Go to Shell and type
checkra1n --force-revert
hey giys how do i go about starting this?
hey guys basic question but what is the utility of signing apps?
i see everyone doing it but if i my tweaks are installing normally, do i need it?
(when i say signing i mean like e-sign..)
or maybe it is only useful for non-jailbreak users
Hey everyone, how to fix this?
How to delete sileo
!t palera1n256
Hey @wispy hemlock, have a look at this!
Status 256 in palera1n loader
palera1n beta 6 has introduced many changes that include a bunch of loader related updates, this error may be related to not being able to force install package managers over existing ones.
Additionally, this error will occur if attempting to initially jailbreak using rootful palera1n
Most users should just use rootless palera1n instead (as it offers many benefits compared to rootful palera1n, and tweak compatibility for it has become very decent). If you do need rootful palera1n, however, you can use palera1n beta 5 and wait for the team to fix the issues in the next beta, though beta 5 does not support iOS 16.4 or newer
!t guide
Hey @fallow prairie, have a look at this!
Hi everyone, i jailbroke my ipad pro 2017 16.4.1 yesterday everything worked fine. But after installing choicy the device resprung and rebooted now i cant seem to get the palera1n app back
I tried the shortcuts method with no results
Palera1n is a semi-tethered jailbreak so when the device reboots you will need to reconnect to a computer and rejailbreak
Sorry forgot to mention that tried that as well multiple times
What process did you use to rejailbreak?
I followed Saunder’s guide, and just booted from usb and hit start with out checking any options.
@still idol
I still have the same issue
well it says "booting", so it should be booting just fine.
i dont see anything above it that's causin an issue
Can’t open normal games/apps
How to open them on jailbroken 15.7.5 iPhone 7 rootless
Dm me if u can help
Did you jailbreak with Palen1x the first time?
Were you jailbroken before or is this the first time?
Tried many times but on android so its my first time on ios
I did: (sudo palera1n -f -c) that kinda worked but its stuck on the ipad the terminal thingy
anyone knows a good free tweak to change your location (vpn, fakegps..)
Use this guide https://ios.cfw.guide/installing-palera1n-rootful/
Guide to installing rootful palera1n
The command should be -c -f
okii i will try that out ,thanks<3
iPhone 7 on 15.7.3, lost my legacy Palera1n JB, installed beta 6 on my 1st attempt, updated Sileo, which forced a reboot (similar to F4i54l ^), and now I can't get past "Booting Kernel." No matter what I try. Any ideas?
Which method are you using?
Hey Danny. I'm unsure what you mean by method...terminal through cd~downloads?
This is my approach.
https://ios.cfw.guide/installing-palera1n/
Guide to installing palera1n
Trying to go rootless to get carbridge working but get this message. How do I fix it?
Did you use the same guide when you initially jailbroke? There is two guides now - one for rootless (the one you shared) and another for rootful
Yes, same one - so 'rootless', it seems...
I noticed the first time around (successful), as soon as DFU was recognized, the script immediately said 'disconnected', but it still installed the JB. The next 100 failed attempts, it does the same thing, saying DFU disconnected, but gets past Bongo, then stalls at 'booting.'
When im installing palera1n rootful theres a step that says run palera1n <insert argument here>
What does that mean
It will be either -c -f or -B -f just depends on your situation - the guide has the details
If possible could you send a picture of the on screen text?
iPhone while frozen at 'booting'?
Force reboot and then run the code again. Send a pic of the text if you can - might give some indication of what the issue is
Palera1n - rootless - fails at
Device should now reconnect in download mode
Dfu mode device disconnected
Error timed out code: -status_exploit_timeout_error
Can someone help?
do you have any passcodes enabled on your device?
Yes but it’s an iphone 7 so i should be good i think
Also is fakeFS needed for rootless
tbf i've got a iphone 7+, it didn't like it when i had a passcode enabled initially, once you're actually jb, it's all good, but during the setup for me anyway, it didn't like it
yeah all of it
Delete the fingerprints in memory?
yeah
does anyone know a fix?
Also fakeFS yes or no when doing rootless?
hmm this is rootless
I am retodd. Please bear with me.
boot with palera1n -s and then downgrade ellekit to 0.5.3
Is there something im doing wrong? Won’t go into dfu mode
Thanks. I love you!
!t usbcmoment
Hey @lost fiber, have a look at this!
palera1n doens't support 2020 se?
nope
Yes Danny with palera1nx
Why terminal not work
yo smart phone mfs is it possible to bypass icloud lock
Can someone help with bindfs it keeps telling me to enable rootful mode when i already have?
Has any had this kind of error?
Same here
Hard reset your device and try again it would work 2nd or 3rd time
Will do, thanks
Does this work on 16.4.1?
Did it work? Also what is a hard reset
You're on iphone 7? Use Palen1x 1.08 (not 1.09). Use rootful install with FakeFS. After install in Sileo add repo : https://havoc.app and install Trollstore Helper. Done. Just saved you like 20 hours of screwing shit up.
you need to use dd mode in rufus, or use ventoy instead
so no rootless for iphone 7? kinda need it for pokemon go things unless it's near impossible ig
actually, typo, meant to type Palen1x, not checkn1x
didn't work good for me. I'd say use rootful right now at this point
but ymmv
also, appsync is gonna fail to work and you'll need this
aah, okay thanks for the info, I'll consult with the guy making the pokemon go cheat to see if it will be available on rootfull
some major landmines in upgrading on iphone 7 too
daaamn so not looking too great
And my iphone 7 is already ILL with how fast the battery gets drained at times
then mysteriously 6s battery life goes up
Incredible lol
since it's battery life is better than ever on 6s, I'm guessing they choked performance on it on purpose to make people want a new phone maybe, with a side effect of better battery life
while on the 7's they can just give you the old switcharoo and erronously run all threads on the performance cores killing your battery lol
wrong architecture most likely, download amd64 (even if you have intel)
@sleek sequoia Unplug and replug your device when you got the error
how to install palera1n
.
Mantap
on a10 and below, you can just do it normally
on a11, use [[fakepass]]
Help
After rejailbreaking and palerain isn’t on my Home Screen?
I’ve done this before on the same device and it worked first try but I’m doing it again and palerain isn’t appearing
Despite everything else suggesting the jb was successful
Checked the pinned message about it and I can’t seem to add a shortcut to the loader, also it isn’t even my first time using palera1n so it’s strange that it’s not working now
I’m pretty sure it is a panic tho as when my device boots it takes a while on the Apple logo, then goes black, then Apple logo appears again so it must be that
And as pinned says there’s no know solution
bruh
What device are u using
Ipad 6th gen 15.6.1
is it possible for you to send the panic log?
How do I find that?
its on privacy then analytics
send one of them
try booting in safe mode (-s), might be a bad tweak
Hey just booted with fakefs and opened the palera1n app it says:
No secure connection could be made
I still can't boot if i use: sudo palera1n -f -c -s it works and then i use : sudo palera1n -f -s and then its stuck at the PongOs on my i pad i still says booting
I alr tried with out the -s but still
It worked a few days ago and i try to download a few app via the Sileo but it restarted tried again: sudo palera1n -f but that didn't work cuz its suck at the booting thing on my ipad
hey everyone am interested in learning how i can jailbreak with palera1n
Can you jailbreak my iPad
does anyone know why my iPhone 8 on 16.3.1 with the rootful jailbreak is randomly stuck in a recovery loop after I accidentally let it die?
seems like i can’t even restore the thing
update: i managed to restore it, its on 16.4.1 now, but now it gets stuck on booting pongos
Is there Gilbraik version 16.4.1
how do i pick my usb boot
im alr on the bios screen
same issue, this needs attention
Hi guys, anyone stuck on booting screen with checkrain logo when trying to re-jailbreak? The only way to fix is, boot the device normaly then factory reset, then do the fresh jailbreak again. Any ideas ?
how long have you waited
what device
what ios
i’m having a similar issue where i’ve just factory restored my phone, and when trying to install the jailbreak again i get stuck on booting pongos for about ten minutes, until i reboot without sileo installed
I've wait almost 7-10 minutes after that the device reboot normaly (without jailbreak access) Ios 16.4.1 Iphone X
ah yeah we’re in the same boat then.
yeah that happened to me on palera1n once
@balmy harbor @summer locust if your on rootless, run palera1n --force-revert a few times (i did 5), and if your on rootful then run palera1n --force-revert -f a few times, then run palera1n --force-revert 2 times
another possible reason is perhaps your trying to boot the fakefs but u havent made one?
ooh, i’ll look into these things, thanks!
for rootful, make sure to run palera1n -fc first, then next run palera1n -f
Yes just did it, and finally i can boot with palerain inside
which command did you run?
and what commands had you run previously?
palerain --force-revert
but i got more problem like attached
click proceed
when i click, the screen blank then reboot without jb
the ventoy.zip and palera1n file just merged when i sent both of thrm and extracted the both of them to usb hardrive
is that meant to happen
run the palera1n --force-revert cmd 3 times, then run palera1n like normal @balmy harbor
All right I'll try, thankyou
is this meant to happen?
ok
palen1x allows you to use palera1n-c on Windows computers via live-booting. You will need a USB flash drive or SD card for this.
im using that
then just follow the tutorial and see what happens
oh nvm i read it wrong lol i do it to one file not the both files
after clearing my usb using the .exe file my laptop doesnt read my usb now
no
a lot of times
the USB can be formatted in a way
where windows doesnt recognize it
oh
check Disk Management and look for your USB
and if it is there, try booting off of it via your computer BIOS
i have windows, macOS high sierra, and macOS Monterey installed on my 2010 iMac right here, and windows only recognizes the windows ntfs partition
it only shows a setting called “create and format hard disk patitions” i’ve heard of something like that with formatting sd cards etc etc do i click that
yes im on it
disk 1 or something like that should be your USB
yes
thats what you want
enter BIOS and try and boot off your USB
sozzz
depends on your laptop / pc brands, something like F1-F10 right after you power on ur pc
sorry mate your gonna have to figure that out yourself
search up "how to enter BIOS on [PC/laptop model]"
im on a aser laptop
^^
try to google it
ahh okay thanks
sorry for me not understanding:P
apparently its f2 and delete
im assuming i click on the disk one then press f2 and delete.
no
shutdown your computer
NOT REBOOT <<
shutdown and wait 1 minute
click power button, and immediately press f2 and delete
and it should enter the BIOS
then boot to your usb
oh ok so i dont do it on disk management
but when i immediately power off for a minute then come back on
Bruh, i still got the same message when try to install sileo
Your jb-XxXXXXXX folder is still intact while /var/jb isn't, this will re-symlink / var/ib back to it's original folder. You may need to run uicache in utilities after proceeding
its not working
IM IN BIOS :D
WOOPIE 
wow this stuff looks so cool ;_;
now, uhm where should i go
@nimble river
send pic
here
it says windows boot manager
ok bye
i’ve looked up how to boot and did the steps if it doesn’t show up on the bootmenu and still doesn’t work
how do I ssh?
You also want to make sure secure boot is disabled too
i have
What sort of jb did you want to do, rootful or rootless?
idk sorry
im on the start of the usb and something happend to it
could someone help me
What stage are you at?
at the preparing bit when you boot the usb
ive been on it for over an hour (lmfao.)
I DID THE USB I NEEDED TO CONVERT IT LMFAO
WOOPIE AGAIN
im literally smiling right now cause this was tireing for something so simple
i just booted it now what ;-;
so my usb is fat32
nvm guys
how do i load palen1x
Once you have the appropriate file installed on your USB. With the USB connected, shutdown your pc, whilst it's boot, press a relavant key to open up your boot manager and select your usb
in order to use passcodes/touchid could you need to use a tweak like checkl0ck or can palera1n natively use passcodes/touchid? I remember reading that it can natively use them but idk
If you are A11 you cannot use or have used a passcode in the past (reset required). You can use Checkl0ck (paid) or FakePass (Free) to add a passcode - these will be removed on reboot
TouchID isn’t possible
Neither is ApplePay
How to fix it?
Sorry, should have specified - on a10
what do i do now that i have sileo and zebra installed im confused
Hey guys, how do I get a terminal after I do palera1n?
What source does it come from?
make sure https://repo.chariz.com is added, then install NewTerm
It says session ended as soon as I open it. Do you have any recommendation?
I cannot type
i’m getting a similar error
you are now the 3rd person i know of to have an error like this
In that case you have nothing to worry about. All SEP functionally will work
I’ve seen quite a few people with this issue but I’m not sure what the cause/fix is rn
yeah, i do recall emmakit saying dodo was messing up jailbreaks
i wonder if it could be that
@slender spindle have you installed dodo?
if you execute bash directly from Filza, and run su mobile, it returns a PAM error
try to reinstall the system-cmds package in your package manage
Yeah it did, I am trying to find where icloud user info is kept.
oh also @still idol is there a fix for the palera1n app randomly disappearing
do you need to run a userspace reboot after or no
Like disappearing while jailbroken? I haven’t heard of that one yet 🤔
Do you know where the icloud user info is kept?
hey guys is it possible to get Libhooker or Substitute with this jailbreak
substitute is already the default on rootful
libhooker-oss is technically possible to use on both rootful and rootless, but it doesn't currently work on the latest version (2.0.0b6), and not sure how well it works
i’m craving the days of using libhooker w taurine on my 8
substitute seems so slow with palera1n atm
ellekit is better, it's the default on rootless but can be installed from https://ellekit.space on rootful too
though there may be a few tweaks that don't currently work with ellekit
i’m talking about rootful
can be installed from https://ellekit.space/ on rootful too
it's for both
is libhooker > ellekit atm?
or has ellekit taken the throne
and please tell me ellekit has safe mode…?
@silent anchor
tbh i have not tried libhooker myself on palera1n, last time i tried with ellekit ipc stuff like cephei/rocketbootstrap didn't work properly (maybe it was fixed, i need to test again) but aside from that ellekit is the best/cleanest imo
and yes it does have safe mode
Is there a way to download normal apps through palera1n jailbreak if no access to icloud?
holding volume up button while respringing should trigger safe mode in ellekit if it doesn't normally
or as a last resort, touch /var/mobile/.eksafemode from ssh
!t icloudbypass
Hey @flat glen, have a look at this!
Discussion of iCloud/Activation Lock/passcode/MDM (Mobile Device Management) bypass, asking how to do it, or posting about it is not allowed. No, it doesn't matter if the phone is yours or not. We will not help you with it. If you do own it, it’s recommended to use the links below.
If you forgot your Apple ID - Apple Support
If you forgot your Apple ID password - Apple Support
How to remove Activation Lock - Apple Support
If you forgot the passcode on your iPhone, or your iPhone is disabled - Apple Support
Sorry, my whole story was posted in genius bar but marked as closed. was not trying to do anything against rules.
@silent anchor crap im in a safe mode loop now
and launching an app while in safe mode crashes it
Question. Should I install palera1n on my iphone 7, which has 66% battery health? Is it even worth it since it will probably make my battery life 2x worse
oof
if you want to save battery life i would just use rootless (which comes with ellekit), fewer tweaks work with that currently but it should be easier on the battery than substitute
and now my phone crashed
i had libhooker-shim and RocketBootstrap installed from the odyssey thingy
Compatible with 15.7?
yes
Nice
would that have caused the safe mode loop
hmm, haven't tried that with ellekit yet, let me see
okay
i think ellekit will probably have removed libhooker-shim upon installation bc it provides libhooker compatibility itself
it did
i’m just trying to figure out the reason of the respring loop
it was so bad my phone crashed
try looking for springboard crash logs in settings > privacy > analytics & improvements > analytics data
will that work in an unjailbroken state
yes
hmm, seems like something caused it to just hang
yea these all seem the same
remind me how do i boot with palera1n safe mode
palera1n -f -s
Could you direct me toward a link possibly? I dont wanna get the wrong shit.
https://ios.cfw.guide/installing-palera1n/ default guide already suggests rootless
Guide to installing palera1n
hmm trying to think what the bad tweak is
thank u sm
can one of yall help me? i have a problem with downloading an app. Ive asked in general and #jailbreak but i just dont get an answer
send a tweak list from sileo
once i reboot and remove ellekit
Is rootless the same as a root jb, but you cant modify system files which makes some tweaks impossible to use, or are there other caveats?
o yea theres the passcode thing too ig
rootful and rootless have the same general caveats (semi-tethered, can't have real passcode on a11) but rootless writes jailbreak files to /var/jb which saves storage on ios 15+ as it doesn't have to copy the whole rootfs
