#palera1n
1 messages · Page 37 of 1
alright, force restart your phone
and on palen1x, go to settings, make sure only DEBUG is selected
how so
what iphone u got
Iphone 8
press volume up, then press volume down, then hold power button for 10 seconds (until you see apple logo)
after that, in palen1x settings, make sure only DEBUG is selected (again), and then start the jailbreak process
Alr now i see the apple logo
release power button
yea
Hey
I was esting
I came back
I dont select fake fs either?
yup
Only DEBUG
Ok
Do i need to stay with my phone
Or can i just leave it be
@mellow mason
Its done somehow
I see plara1n on my phonr
yeah because you tried to make rootfs twice
Alr
Can i turn off my pc now
yea
Alr thanks
is there a way to stop the phone
i failed my thing and it stuck on booting
fixed
Anyone know how come when i try to jb on rootful it doesnt reboot my phone but on rootless it does after the pongoos is done
My iPhone 7 Plus on iOS 15.7.3 is not booting up and is stuck on apple logo after doing rootful palen1x
Cheklist fakefs
Mine does some similar and sometimes when it does boot up i dont have any new icon on some screen
Been trying non stop and same shit
Wait so you haven’t found a fix
nope when i try to re get fake fs i get an error its already on there and when i just jb withought it get stuck on pongo screen it wont boot up
restore fs and then jb with fake fs it boots up and seems like it worked but nothing in home screen
Then why would you tell me to do that
This
1.Palerain rootfull,create fake fs
2.palerain unchek fake fs..if boot home screen palerain app should have
yeah palrain rootful fake fs 1st time it boots up but nothing on home screen
then when i try with nothing checked get stuck on pongo checkmate screen
if i try rootless it works fine but thats pointless
1 more bro..if stuck ctrl +c type exit then klik palerain start again
yeah have done that followed the steps from the website it just gets stuck again
if fakefs isnt checked it dont pass the pongo screen
its like it freezes there
Intel or amd..try another pc
i tried it on linux machine and on pc with intel get errors would be nice if admin or someone else that knows what the problem is could help
Hello, how did you solve your problem? I have the same
I have ios 16.3 in Iphone 8 plus someone who can help me?
Any bypass tweak working on ios 16?
Hello. What passport ssh on rootless jailbreak palera1n? Alpine do not work.
The a is lowercase no capital letters in alpine
Unless u have previously been jail broken and changed the root password then need to remember whatever you put
Thank you
Np

just try:
palera1n --force-revert -f
palera1n -cf
palera1n -f
Hi all. Needing some assistance with troubleshooting. New to jailbreaking (as in my first time was yesterday). I followed the instructions on https://ios.cfw.guide/installing-palera1n/#running-palera1n-1 and it seemed to work as instructed, but I haven't been able to complete the last step "Once the device boots up, open the palera1n loader app and tap Install." I don't see a palera1n app on my iPad, but I can't really retry the process because there's definitely something taking up a "palera1n amount of data" on my iPad.
Details:
- iPad 12.9 (1st generation) ← I believe that means it's A9X
- iOS 16.3
- Originally had 10+ GB of space free
- Running macOS Monterey on a MBP 13", 2016 model
- I am using a USB-C/Lightning connector (but I didn't have problems getting into DFU mode — or at least terminal didn't note anything)
- I downloaded "palera1n-macos-universal" to my Downloads folder, so that's where I "cd" in terminal (oh and if someone here manages that page ... please add instructions for what/how to "cd" ... it took me a fair amount of googling to figure out what "cd" meant and how to "cd" to my downloads directory — simple in hindsight, very difficult for the "tech illiterate")
- I used "palera1n -c -f" as my argument
If you need any further details or information, I'm 100% happy to provide that. Also happy to hop on a call or whatever (I'll definitely pay for the time) if it would be easier to troubleshoot live.
For those that are going to suggest "just restore and try again" ... unfortunately, that would defeat the purpose of me jailbreaking — TLDR: there's an app "Albie" (the best reddit image browser IMHO) I've been carry over from iDevice to iDevice for years (shockingly still functional despite having been coded 9y ago). It's no longer in the app store and so I need to get the .ipa off my iPad so I can port it to my iPhone (and store it for future use).
Appreciate any help y'all lovely people can offer. Thanks in advance!
Guide to installing palera1n
Haha sorry.
That didn't work :/
It just opened the camera
ight 1 sec
quick question did you try rejailbreaking by ONLY using the -f argument after the -c -f argument?
Just to clarify. Do you mean going into terminal and only entering the -f argument?
wow
Yes. I have tried that. I'll try it again right now though
OMG!!!
The shortcut worked this time
You are amazing!!
The loader isn't on my device as a viewable app, but this worked .... Thanks so much!!!!!
OK now to figure out how to get this file off my iPad!
calm down man that shortcut literally just opens an app with nothing else i am no superman
just search up "palera1n" in the app library and add it to home screen
Okay I need some help if possible. I’m trying to run Palera1n on this i8 with 15.6.1 straight off a factory reset with passcodes all off is takes to the screen and looks like it’s doing it’s thing then the phone shuts down and turns on and nothing, no palera1n. Any suggestions
(gtg)
Not sure what you mean. I’m kinda new to this stuff sorry
Okay
what guide are you following
A complete iOS modding guide, from stock to jailbroken.
Originally tried bind but then realized I had over 15. G of storage so tried fake
whats cydia url source?
Anyone else had issues re jailbreaking w palera1n
non existent
it doesnt exist anymore?
does palen1x work for the iphone SE 2nd edition
no
oh
What cable r u using
Lightning to usbc will not work
XD fixed dw
Can I run palera1n on a raspberry pi
yes
Awesome thank you
Also I think I read I wouldn’t be able to lock my phone, Is there a way I can still lock the phone
there's a tweak
checkl0ck
I'm not sure, I've never used apple pay, sorry
Okay thanks for the help I greatly appreciate it
I'm sure if you ask in #jailbreak someone will know
Alright
JB for 16.3.1 do no good for ipa part of it without appsync or trollstore and eighter work ?
neighter*
afaik no, trollstore doesn't work on 16
I didn't understand any of that sentence
appsync ony work up to 16.3 so you cant install ipa
same
only
does palerain even work on 16.3.1?
yepp i forgot to check if appsync did 😛 so i got a JB phone without any way to install apps 😛
if palerain works I don't see why appsync wouldn't
I'm boutta find out
lol
hope they fix appsync soon 😛
did you try if it works @winged storm
when you ty download it from repo it gets queued and error and it say it not comp with it
try
oh well
try altstore and find the IPA's
for raspberry pi do I follow the same guide? (Super new to this sorry about playing 20 questions I honestly don't know)
can someone help me? i got an error on iphone 8 plus, ios 16.3, in palen1x, "UaF race: heuristic strategy failed, setup packet was not accepted"
(sorry for the late reply) yeah, as long as your distro's repo has all the packages needed compiled for ARM, you should be all good
just make sure you use palera1n-linux-arm64
What do i do if i don't have Linux or Mac?
then you need to boot it from a usb stick
is there palera1n for windows?
A complete iOS modding guide, from stock to jailbroken.
ty
is there a way for me to backup my iPhone and reapply it after jailbreaking? I really don't want to wipe my data lol
Use iTunes
Help please
what tweaks did you install lately?
Thanks friend
Hey @pine swallow, have a look at this!
This link saves me
Solved

Hi, I'm installing palera1n-c (v2.0.0-beta4) on my iPad Pro 2nd gen (A10X) using my Macbook Air M1 and before I accidentally unplugged while it was setting up fakefs. Now I don't know if that broke anything at all, so I figured I'd try just redoing it from scratch, but even when I run palera1n --force-revert, let it reboot, then run palera1n -c -f I get the error message on the iPad
cannot create fakefs over an existing one without palerain_option_setup_rootful_forced.
What is the proper way to completely clean-slate the installation?
(Nothing is set up on the device yet so anything is game)
Edit: turns out I had to run palera1n --force-revert -f
yep
also for palera1n-c, accidental disconnects during fakefs creation actually don't interrupt anything
How do I install palera1n
Guide to installing palera1n
Hi, I received an error “Ignoring non-arm64 device.”
But my phone is A11 and the version is 15.3.1
I don’t know why I can not did it.
you sure? what's your device?
Iphone 11
version 15.3.1
...
0.0
check again if it's A11
there's your problem
the iPhone 11 uses an A13 SoC, which is arm64e
remember tho
Fugu15 exists
so you might get a jailbreak eventually
nice!! thanks for bringing a good news
(or end up like the A14 kids who stayed on 14.6-14.8)
sad 😢
lmao
Hi guys, when i try to jailbreak with palera1n, when i start the jailbreak i need to check the create fake fs, but when i press space, then enter and back to the options the create fake fs is not checked, can someone help me?
its normal
Hello dear, How can i resolve this problem? My device is iPhone SE, 1st gen.
Hi everyone, I can't build + attach debugger to any app I build with Xcode when Substitute's Enable Tweak Injection option is enabled. I get this error in the logs:
libc++abi: terminating with uncaught exception of type std::overflow_error: __next_prime overflow
terminating with uncaught exception of type std::overflow_error: __next_prime overflow
(lldb)
I've already uninstalled every dylib I could in /Library/MobileSubstrate/DynamicLibraries. The remaining ones I have no idea how to uninstall (or even if I should):
iPhone:/Library/MobileSubstrate/DynamicLibraries root# ls
MobileSafety.dylib* MobileSafety.plist mrybootstrap.dylib* mrybootstrap.plist*
Any ideas what could be the cause of this Xcode build + debug attach issue? I'm on iPhone X, iOS 16.3, palera1n jb.
hey there y’all, trying to jailbreak my old 7. it’s running the latest version of ios 15, but it’s hung here
any ideas on where to go from here?
you already have a fakefs and you're trying to create another one
Boot the phone with palera1n -f only (or if you're using palen1x, uncheck "Create fakefs" and "Create bindfs")
don't check any options, just do palera1n
all the same except not tick fakefs?
don't tick Create FakeFS
is it stuck on this screen?
apparently that would mean booted into fakefs without creating fakefs first, but the previous error just said that fakefs exists
that screen shouldn't ever take more than like 15 seconds so it's odd
how do i delete my current fs
check Restore RootFS in palen1x
i should also reboot iphone right
yeah
can i reboot my pc in the meantime
yes (but i imagine the phone is almost done by now)
and then you'll need to boot back into palen1x for second step
if the phone hasn't rebooted on its own, send another pic of the phone output
is some savemode on palera1n???
It's so dang unfortunate that there just isn't any way to downgrade some of these phones anymore thanks to Apple. All that time preparing all gone to waste...
Almost feels like 15.6RC was Apple’s final act of mercy before laying down the hammer
so did you create the fakefs and then rerun the jailbreak without creating the fakefs
hi, im trying to jailbreak my iphone 8 plus on ios 16.0.2 but every time it finishes it gets suck on a screen that ends with "booting" am i doing something wrong?
Need some advice guys. I have an iPhone 13 on 16.1.2 but desperately want a jailbreak. If you were in my shoes would you consider downgrading to an iPhone X to use the Palera1n jailbreak, or would you just hang on to the iPhone 13 in hopes that a 16.1.2 JB comes out!
Well there’s never a guarantee on if or when the jailbreak from 16.1 comes out but if you need to jailbreak desperately then downgrade (idk why but you probably have ur reasons)
I mean it’s moreso I just want one badly, it’s not necessary, I’d love to use all the tweaks and have full ownership of my device.
Cowabunga / Macdirtycow is nice and all but not the same
In your shoes, desperately needing a jailbreak, downgrade your daily driver phone to an older one like you said. iPhone X requires getting rid of the passcode to use palera1n, so I'd even go a generation older and use an iPhone 7 if the passcode is a big deal
I have a question for ssh, how enable/what is password of root
i installed palera1n jailbreak on 15.7 ipad 2019. Installation completed, but palera1n application did not appear on ipad
open the shortcut on your ipad
should open the loader
if it didnt, respring your device manually
rejailbreak
Okay
ONLY BY USING -f ARGUMENT
^
sudo ./palera1n.sh --f 15.7 --semi-tethered?
Okay
if that doesnt work, do sudo ./palera1n.sh --tweaks 15.7 --semi-tethered
I used it originally
ok then use that
the reason i said "only -f" is because i thought you were using palera1n C
does not work
Is there any way to spoof location in iOS 16?
Alpine by default is password for both [root] and [mobile]. You can, and DEFINITELY SHOULD, change it to something else, using the command passwd.
I try alpine/root with user root but not work. I'll try later thanks.
Are you using ssh? If you are, just type “root” when it asks you for user, and when it asks password, type “alpine”. When you write the password, it won’t show that it is being typed.
anyone know why dodo lockscreen tweak does nothing on 15.4 ipx
even when i disable every tweak but dodo
and the preferences load fine
but no changes are made by the tweak
ETA for palera1n rootless?
i installed BindFS on a 15.7.1 ipad and when i ran --force-remove it booted into what appeared to be rootless mode
and then i ran remove from the app which says rootless only and did it successfully
wdym eta its out
Does Trollstore work on palera1n?
when jailbroken yes
oh how do i use it in rootless mode
without doing --force-revert
do i just not create fakefs/bindfs?
oh -l
i keep having issues with every source i try
it says can't find release file for ...
Can anyone help me
My device stays on found pongoosusb device
I also See The checkra1n screen but it stays
which ones do? i tried HYI, bigboss, sparkdev, etc
none of the major ones do
mostly just repo.palera.in and nebula’s repo
linux CLI in a nutshell
wait
i think there has to be one more arg.
let me check rq
no
dont do that
you're mixing C with .sh
are you jailbroken using rootful
nah they just dont specify it, and they dont have the guide for removing C version of palera1n
sudo palera1n --force-revert -f
icons will stay on homescreen by the way
but they arent usable, so just hide them or put them in a folder
oh ok
#==========================
- [03/09/23 01:02:45] <Verbose>: Starting thread for Apple TV 4K Advanced board
- [03/09/23 01:02:45] <Info>: Waiting for DFU mode devices
- [03/09/23 01:02:45] <Error>: Unable to create a plug-in (e00002be) (error code: -status_create_plugin_error_1)
- [03/09/23 01:02:45] <Verbose>: DFU mode device disconnected
- [03/09/23 01:02:45] <Verbose>: DFU mode device found
- [03/09/23 01:02:45] <Info>: Checking if device is ready
- [03/09/23 01:02:45] <Verbose>: Attempting to perform checkm8 on 8015 11
- [03/09/23 01:02:45] <Info>: Setting up the exploit
- [03/09/23 01:02:45] <Verbose>: == checkm8 setup stage ==
- [03/09/23 01:02:45] <Verbose>: Entered initial checkm8 state after 1 steps
- [03/09/23 01:02:45] <Verbose>: Stalled input endpoint after 8 steps
- [03/09/23 01:02:45] <Verbose>: DFU mode device disconnected
- [03/09/23 01:02:45] <Error>: Unable to create a plug-in (e00002be) (error code: -status_create_plugin_error_1)
- [03/09/23 01:02:45] <Verbose>: DFU mode device disconnected
- [03/09/23 01:02:55] <Error>: Timed out waiting for exploit trigger stage (error code: -status_exploit_timeout_error)
I get such a mistake?
Need use user mobile for ssh
Then just type mobile instead of root
How add a repo to Sileo?
I got "Error: Didn't find architectures "iphoneos-arm64""
Bump.
Is Substitute supposed to work with iOS 16.3, iPhone X, palera1n?
it resprings after a certain time to make it appear
yes, but it’s a little buggy due to sandbox restrictions
if I were to jailbreak with palen1x, do I need to boot into the Linux environment every time I rejailbreak?
I have this error can someone help me?
<Error>: Timed out waiting for exploit trigger stage (error code: -status_exploit_timeout_error)
you have to boot into palen1x every time yes
Is it easy to download and does anyone have good tutorials?
Guide to installing palera1n
it’s easy if you make sure to follow the guide
While using palera1n on iPad 6th gen, should I factory reset before doing it?
- [03/09/23 21:21:35] <Info>: Waiting for DFU mode devices
- [03/09/23 21:21:35] <Verbose>: DFU mode device found
- [03/09/23 21:21:35] <Info>: Checking if device is ready
- [03/09/23 21:21:35] <Verbose>: Attempting to perform checkm8 on 8010 11
- [03/09/23 21:21:35] <Info>: Setting up the exploit
- [03/09/23 21:21:35] <Verbose>: == checkm8 setup stage ==
- [03/09/23 21:21:35] <Verbose>: UaF race: setup packet was accepted, attempting heuristic strategy
- [03/09/23 21:21:35] <Verbose>: UaF race: heuristic strategy was successful
- [03/09/23 21:21:35] <Verbose>: Entered initial checkm8 state after 1 steps
- [03/09/23 21:21:35] <Verbose>: Stalled input endpoint after 1 steps
- [03/09/23 21:21:35] <Verbose>: DFU mode device disconnected
- [03/09/23 21:21:36] <Verbose>: DFU mode device found
- [03/09/23 21:21:36] <Verbose>: == checkm8 trigger stage ==
- [03/09/23 21:21:37] <Info>: Checkmate!
- [03/09/23 21:21:37] <Verbose>: Device should now reconnect in download mode
- [03/09/23 21:21:37] <Verbose>: DFU mode device disconnected
- [03/09/23 21:21:57] <Error>: Timed out waiting for download mode (error code: -status_exploit_timeout_error)
😦 I'm using palera1n -B -f because I didn't have 10-15 gigs of free space
anyone else still using tethered in 2023?
How do I cleanup the FakeFS? I just read the note which says you have to clean up 10-15 gigs for iOS 16
...free up space
Settings > General > iPhone Storage
see what takes up the most space
and start clearing out bits of it until you have around 10 GB free
palera1n -B -f was successful and I'm pretty sure it took up about 3-4 gigs. I currently have 10.9 GB of "System Data". I'm fairly certain this wasn't the case before
note that -B is not supported with iOS 16
Dude... "How do I cleanup the FakeFS?" Am I using the wrong terminology or something. It's the FakeFS that takes up the space you have to clear up right?
Yeah but it worked?! and now I have less space than I started with
Of course the second half of the process palera1n -f does not work
ohhh
uhh
think it's --force-revert or smth
Yup. Just came across that in the --help. Wanted a confirmation if that's the correct option
Yo
I jailbreaked
Then factory reset cuz I didn’t like it
Did I remove it the right way
Or did I fuck up
-sent from the same iPhone
You should remove jailbreaks by doing a restore rootfs, which can be accomplished with palera1n-c using --force-revert -f (so you didn't have to wipe the phone)
It likely didn't damage anything to reset the phone, but you should still use that command to make sure it's fully removed
Eh
Too lazy
But wait
If I do the jailbreak again
Without create fakefs
Will it work?
Or do I have to start from square zero
Hey guys if I…
1: Disable passcode on A11 ios16
2: Make a backup on iTunes
3: Restore phone
4: Jailbreak
5: Upload backup to iPhone
will it work?
You have to upload Back-Up fırst than jailbreak
ty
This jailbreak sucks
Even the windows version doesn’t work
Jbinit died
💀
Holyyy shittt finallyyyyy!!
fyi for anyone else, palera1n-c worked for my iPhone X 16.3.1 👍
Hey guys so once i go to boot pongo OS on my iphone se i get stuck at patching recfg Seqeuence
Bro I wanna jailbreak but the only thing holding me back is the fact that I can’t use Face ID
Other than checkl0ck, is there any method?

Guys guys guys, i did restore revert autofs(or smth like that) to unjailbreak, is that the right way to do it?💀💀💀
does it work with a iphone 13 pro max
no
Hi guys, I want to compile some cmake project on a jailbroken ios device. does anyone know how to install toolchain?
Hi! can someone pls help me with this issue, I've been searching a lot, but nothing seems to fit ( Error doing patch_rsa_check()!) that's at the end of the jailbreak process
Any jailbreaks for the iPhone 14 pro max
any tweaks for 15.6 lockscreen
btw Kalm is broken, it got stuck after respring and couldn't boot without restarting, re-jailbreaking and removing tweak after launch daemons and remounting r/w
no
waiting for iphone 13 pro jailbreak
I just installed Xina15 with Troll Store but it won’t launch. I did everything correctly.
Any help would be greatly appreciated
Why r u in paler1n channel
Ask ur questions in #xinaa15
Oops that’s what I meant to do
Jellyfish and complications. Maybe lastlook too
heartlines, dress, nexus(icraze, incoming), aim, dodo etc
don't use sh version use palera1n-c
Can i install palera1n without computer?
no
Is palen1x support semi-tethered?
yes (for the 5th time)
Trying to get back in the scene have an iPhone 7 sitting on 15.7.3 from what I was ready palera1n is the best option. Question i have is does palera1n break passcode?
palera1n is the only option, correct
if you’re using palera1n-c (which is what the guide here, https://ios.cfw.guide/installing-palera1n, is based on) it doesn’t, but if for some reason you choose to use palera1n.sh you’ll need to disable your passcode
Is palera1n compatible with iPhone 12 Pro Max?
Know of any jb with iOS 16 with A14?
Not any that I’m aware of. Palera1n is the only ios16 JB so far
and there is literally no chance in this world to downgrade down to ios 15 on an iphone 11
except u have those blobs
Bummer
or whatever its called
Yes. No way to downgrade. But if you don’t know what blobs are you don’t have them saved
If Apple doesn’t have a signed version of the OS then you can’t downgrade to it
damn what
cann u look in ur dms rq
anyone know if palera1n would work on an ip7+ on 16.3.1?
?
can u read?
yes
iPhone 7 uses A10 chip
Looks like the latest version apple provides for an ip7+ is ios 15.7.3. I guess it will work on this version too?
It should
Does palera1n work on iPhone 13 Pro 15.4 ?
?
why am i a dumbass now
u dumb huh
i can tell yeah
i have 5
nope
i can change if u want
nah thanks
xD
im not even listening to music rn
its a app for dc
for my profile
nope
im in a comp game
never will
What’s a good way to use palera1n without having to install linux on a mane drive
install linux on USB drive, or buy a macbook
Any specific type of Linux good for this?
A complete iOS modding guide, from stock to jailbroken.

Stuck on rooting
Just been sitting there
@west egret would it be a issue if I did bindfs instead of fakefs?
send pic
Sitting like this for like 10 mins
I meant to select fakeFS but I selected bindFS
@west egret
iPhone 6S?
8+
What's showing on the computer
run it
Ok
Says waiting for devices
The device isn’t recognized
It’s in the state where the phone is slightly lit up but not off
Checkmate. thank you!
What?
ios 15.7.3 ip7+
hmmm maybe try force reboot
How do I do that
!t reboot
iPhone 8 or newer (including all notched devices, iPhone SE 2020 and newer):
- Press volume up
- Press volume down
- Press and hold the side button for 10-20 seconds until the Apple logo appears
iPhone 7:
- Press and hold the volume down and power buttons for 10-20 seconds until the Apple logo appears
iPhone 6S/SE 2016/iPad 8th or older:
- Press and hold the home and power buttons for 10-20 seconds until the Apple logo appears
You did it?
if it doesn't recognize the phone but it's in DFU then idk
yes
Nice. How was it
Exciting! Anyone happen to know package for installing .ipa files?
How to get appsync?
[[AppSync Unified]]
Enables the ability to install unsigned/fakesigned iOS applications.
Karen/あけみ, Linus Yang
108.0
Free
ai.akemi.appsyncunified
Huh palera1n didn’t install
8+ with over 16+ gigs of space should have create fakeFS
not sure if related but I had to run through palera1n twice to get it to show
I’ll try that
Palera1n is so complicated 😭
Ok should I remake fakeFS?
?
force reboot and do the same thing, I can't see any relevant logs because of this debug
Should I remake faleFS
Fake*
not yet
I think so, when you start the program make sure -f is listed in the arguments
All I have is -f and -V
ok
Another side note, I ran palera1n in recovery mode
try recreating fakefs, if it fails and the screen says fakefs is created then idk how to fix
Ok
I need to force reboot after I create fakefs
If that might fuck things up tell me
idk then, force rebooting is OK since even if it's goofed you can toggle "Restore Rootfs" to undo everything
Ok
what guy do I follow to jailbreak my iPhone X on iOS 1 5.5 with 300 so gigabytes on mac
I jb my ip 7 plus on ubuntu for linux
I done all the step but
The last step i cant down palera1n
i found enjoy word
I've been trying to do a rootful jailbreak my ip 6s plus with palera1n for the past two weeks and everything goes well up until the exiting and re-starting part.
When I exit and re-install the jailbreak, after less than 5 seconds it all stops and doesnt move.
It pauses halfway through typing a word but everytime I restart my phone and do the whole thing again, it ends on a different word everytime.
I can tell its not frozen because it responds to me unplugging and replugging my phone.
I have no clue how to fix this and no one on google does either.
If anyone has had the same situation happen or know any way to fix this that would be appreciated.
Feel free to ping me if you are able to help me.
After installing a tweak or uninstalling one, Sileo does not prompt to respring, instead it just says “done” at the bottom.
Any fix?
when im using palen1x and my phone dies i need to re-jailbreak it but it keeps getting stuck on the apple logo
when booting
Why do I click continue or install after installation, it comes out
Where did you install this
that's fake
and where to download a normal one so that everything would work normally
You can give a link
Guide to installing palera1n
Can you explain what you did right before that happened

Hi,
I recently ran palera1n on my computer (using the create bindFS setting) and the process went smoothly on my Iphone 7, but the palera1n app didn't show up.
So I tried again, this time selecting the restoreFS option, and while the app did appear, I got an error and could not install it from the app loader.
Then, I tried a third time (choosing the bindfs setting again) but I just got the same problem as the first time.
What do I do?
To install, you're running palera1n twice to complete both steps of the process, right?
Basically, what I did was I ran palera1n once (to create the bindFS)
and then when I didn't see the apploader on my home screen I ran it again (restoreFS)
and then I got this message
Run palera1n once with create bindfs, then run it again without create bindfs
So I don't select restorefs the second time?
correct
alright
I'll try that
The first time you run it and create bindfs, the app doesn't appear because it only creates bindfs and doesn't jailbreak
it worked, thanks
Hi
I have a problem palera1n app didn’t showing on homescreen plz help iPhone 7 IOS 15.7.3
read the last 10 messages in this channel and see if that helps
after i installed palera1n without any issues, i cant open tweak apps like Batterylife ... cant find any solution :x
??? 8+
install [[autosigner]]
perfect ! ty ❤️
So, after various tests I came to the conclusion that my palera1n jb is broken. I could tell you all the problems but it would take too much time.
I’m using palen1x to jb my phone, btw
I tried many times to restore the rootfs and re-jb with no luck.
Do I need to completely restore my phone and re-jb or is this an issue related to palera1n?
iPhone X - 16.1.1
did you restore rootfs with --force-revert -f
Hello everyone. I created fakeFS on my ipad pro 9.7 but now i can't do the next step. Help me
if you've created the fakefs make sure you rejailbreak with palera1n -f (assuming you're using palera1n-c)
What's the different?
I've jailbreak with window
hello, when i try to jailbreak my iphone 7, 15.7.3, palera1n errors out and i dont know what to do, can anyone help? my logs are https://pastebin.com/157h8MwF and the phone just stays on a white screen
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
hello is there a way to get cydia on palera1n
unplug your phone and plug it back in while the program is running
basically, when you get that "Timed out"
if it's still like that, unplug it and plug it back in now

I have a few questions:
-
Anything that's jailbroken on my phone (tweaks and apps from Sileo/etc.) will be disabled if I reboot my phone normally, right? (The reason why I want to reboot is because the jailbreak bypasses I've tried aren't working right for the app I want to use.)
-
After the reboot would apps still be able to detect I've jailbroken my phone? Or will I be able to use said apps normally?
-
After a normal reboot, how would I go about setting the jailbroken state back up?
1- yes.
2- you can use thm normally.
3- if you use palera1n C version, do palera1n -f, if you use .sh, do ./palera1n.sh --tweaks (iOS version you're on) --semi-tethered
(if linux with sh, add sudo before ./palera1n.sh)
got it, thanks
Help please
After a reboot I did palera1n -f and now it’s stuck on booting pongoOS
I’m on a iPhone X running 6.02
16.02
?
Woah, palerain-C supports passcodes on A10?!?!?
How come I never heard of this?? 
I was literally thinking to myself “I’d like to jailbreak again; but only if they found a way around passcodes”
That’s awesome. Love everyone working on this, wow 😁
yes
pongopongo
dont
it’s outdated and old
I don’t know a single end user who still would use Cydia after trying other package managers
One message removed from a suspended account.
Do someone here sucessfuly run palera1n ios 16.3 on SE (2020)
It can’t and never will be supported.
palera1n: uses checkm8 exploit
checkm8 exploit: Only works on devices with bionic chips ranging from A7-A11
iPhone SE 2020: Uses an A13 bionic chip. (palera1n not possible)
go away
Not at the moment, given your iOS version. (16.3)
Or some older? like just 16
16.3 IS jailbreakable, but only with palera1n.
Oh Sh*t
what chip does iPhone 11 have
Thanks you @vital marten for help
A13
Just to make sure
Yeah not jailbreakable
Hi, im currently trying to jb my iphone6s 15.7.3 through palen1x. Does it normally take long (abt 3 hrs now and still counting) for the whole process?
I am using a ryzen7 laptop currently, but there are no error or anything like that showing up. But it always looks as if the text on the boot screen gets stucked, and then it suddenly continues..
can u show ?
amd processors hv a rly low success rate in palera1n
supposedly laptops hv a better chance but idk by how much
Show my iphone screen u mean?
u did fakefs ?
Yes!
-f -c -v
Because mine is the 64g version, so i assumed that should be the best for me
Ok lemme try that
/forcereboot
Is it safe for me to just remove the cable?
yea the scripts done atp
yes
Perfect, will try that as well
I changed port, typed -exit but it seems that it cannot detect my phone. Should I restart the phone by holding power and home button again?
Will see what I can do about this haha
Not anymore
lockscreen ?
oh
did u use the -c flag twice ?
he can just jailbreak now ?
Wait what does that mean?
Ive been holding for a while now nothing is happening 😂
Is it the volume down button or the home button
Ahhhh no wonder 😂
means hopefully u jst need to uncheck create fakefs nd ull boot jailbroken
I see!
reboot
iPhone 8 or newer (including all notched devices and iPhone SE 2020 and newer):
- Press volume up
- Press volume down
- Press and hold the side button for 10-20 seconds until the Apple logo appears
iPhone 7:
- Press and hold the volume down and power buttons for 10-20 seconds until the Apple logo appears
iPhone 6S/SE 2016/iPad 8th or older:
- Press and hold the home and power buttons for 10-20 seconds until the Apple logo appears
So the command should be -f -v now right?
correct
Awesome, i’ll give that a go 🤞🏼
Thanks guys for the help so far!
Oops not going that easy ig 😂
Should i try force rebooting again?
try this
dnt force reboot
if it still doesnt work after a couple tries its probably an amd issue
Quick question, if i were to try to do it on an intel laptop instead, is there anything i have to remove first or can i just do the whole jb process as it is?
i wld recommend restoring rootfs in case fakefs werent created rightbut u cld maybe jst do -f -v on it
Awesome, i do have an old intel laptop lying around. Imma try it on that instead
no but yes
Hmm i see a couple of “Failed to find” stuffs when doing -f -v now
Can I do a clean re-jb if I just ran the -f -c -v command again?
It got stucked on that screen, so i did another force reboot
But the palera1n app is not there
Right now im running the -f -c -v again
And this time it looks like its working much smoother on my older intel laptop 😂
Will see how this one goes
🙏
It works now! Goddamn amd was the problem all along haha
Thank you sm guys @blazing gulch @silent anchor
no prob njoy it
You can use None!
If you're not willing to use a kernel bypass, try spamming the home bar like in this video
I'm using Paleraln C on a iPhone X on 16.0.2 and tweaks are not showing up I tried downloading cylinder rebound and it didn't work all tweaks won't show up in settings and are not working. Also I already tried enabling tweaks thru the paleran app.
You can ask in palera1n own discord server. Google it
hm, why did they setup a separate server instead of staying here?
Does anyone know to change from sileo to cydia in palera1n I usually find comfort in cydia (Ios 16.3 iphone 8 plus)
what is jailbreak
cant, cydia is broken
are any of you guys familiar with palen1x
lol
write “ls” command
and share out
lol you boot partition is panic 😱
So what's wrong with ls command
I was already told devices uncompatiable so it is what it is
you boot part is gpt, disk writed ad msdos(legacy)
enable legacy support on bios/uefi and try again
don’t argue, but rather try what I said, I think that in a percentage of 99% what I said will work for you
Hi all. I'm on A9X and 14.3 is ios 16 JB with Pale worth it?
Is it stable enough to warrant JB from 14.3 and taurine?
stay
stay
stay
stay
stay at all costs
ALL COST!
palera1n is semitethered (or tethered if 16gb)
taurine is semi-untethered
so its ur choice
either use a pc to rejailbreak
or use an app on ur phone to do it
Upgraded. Tbh it was easy
Not sure. Cant tell a difference between it and taurine. Taurine was always annoying. I'm okay with senitether
Much rather have latest OS while I can.
Ios 14 is oof. Def prefer 16 so far. Thank you though
I just let palen1x do that
will it ever be possible for palera1n to support passcodes on a11?
On iPhone X you can install checkl0ck
I’m using it and I can have passcode and Face ID
ty, but i mean is it/will it ever be possible for support of normal passcodes in the future?
One message removed from a suspended account.
fakepass better
bc free
- checkl0ck is made by a transphobe
aint no way in hell im supporting a transphobe
Too late 🥲
the only way ill get checkl0ck is if someone gifts me it
its anyone can help me install palera1n in my device plz?
what is the filename of the version you downloaded
i was doing the steps with the beta, I'm now using the lagacy steps but also geeting stuck after it going into DFU mode for the first time
error patch_rsa_check
Anyone?
looks like a common ipad bug? Error doing patch_rsa_check()!) how to fix it tho ???
Seems like an easy fix, just do chmod +x palera1n. Can’t help further than this sorry-
Where's the genius in charge of palera1n package repository ? Does said genius know they've broken the repo?
it's not likely because palera1n only supports passcode on A10(X) because of blackbird, a publicly available SEP exploit. there's no such public exploit for A11, so without an exploit, this won't be added
how is it broken
can someone point me to the most uptodate guide on jailbreaking a iphone 7 plus with palerain
Jailbreaking my 6s and 7s (both 15.4) with palera1n on Windows following this https://ios.cfw.guide/using-palen1x/ All very easy and straightforward. Both phones seemingly get jailbroken but no palen1x app pops up after reboot (nor can I find it by searching). Is this a known issue? I've reset both phones, removed passcode locks etc. Currently restoring their backups and going to attempt one more time.
I did the first time. It hung at "booting pang os" for about 10 minutes before I did what it said to do, which was ctrl+c and re do. They both seem to get stuck at different parts and I'm pretty sure I've never even made it to that second time. It will say it's finished and/or the phone just boots to the home screen
Done it 3 times on each phone, usually slightly different behaviour each time. But pretty sure it's never taken me to that step before "finishing"
Booting to the home screen means first part is successful. It's normal behavior for it to finish creating fakefs/bindfs and then boot to iOS unjailbroken
Is there any way to manually trigger the second part? I'm guessing that's where it loads the app I'm suppose to see
Run it without ticking the create fakefs/bindfs box
If the fakefs/bindfs is already created, it'll jailbreak
If you reverted palera1n (restore rootfs) ever, that undid everything, so you'd need to start over
Yeah I'm starting fresh with the 7s currently. Doing first enter DFU step
Seems like it's getting angry I'm using a different lightning cable
Computer now sitting here. Phone seems to have halted.
7+
I'll assume it didn't like the generic cable. I'll do a different port and authentic cable this time. Last attempt
Like 8th times the charm. No idea why it worked that time except that I just kept rage running it
i think i'm on the same step
i can't get into dfu mode
used a different cord, seems to be doing its thing now
i am on a 7+ on 15.7.2, i ran through the whoel process but it jist seems to load the regular home screen. i see on storage i have way less space though
(I don't see sileo)
nvm i seeit now!
!t palen1x
palen1x allows you to use palera1n-c on Windows computers via live-booting. You will need a USB flash drive or SD card for this.
Did you find a solution? because I also have the same problem...
I saw you where having the same problem using the search function. Unfortunately I don't have a solution. Are you also using a iPad and M1 Mac ?
nope
Ipad yes...but i'm using ubuntu, and several times I always end up with --kpp function. maybe jailbreaking first will help the downgrade issue.
I'm not downgrading, I want to directly jailbreak IOS 16.3
That part wans't a problem...I don't know in Mac but in Windows or Linux it goes smooth.
I use a USB to USB C dongle to connect to my mac, are you also using a USB C connection ?
Have you solved it? I also encountered this problem in windows. I tried to unplug the usb and plug it in again. The software will read it, but the installation of palera1n was unsuccessful.
Once you create the fakeFS, you don't need to tick that option again, start the process one more time and it will work
Does VM work?

what tutorial you followed for the Windows version ?
Hi, what’s the best jailbreak for iPad IOS 15.3.1
there isn’t a “best jailbreak” there’s either one or none yet - what iPad
Ok, I’m new in the jailbreak stuff. I have a iPad mini 6th generation
no jailbreak
Ok, thanks
how long should it be stuck on "Entered initial checkm8 stage after 65 attempts" <.< been there for 10mins
Ipad 7th gen 15.5 with create fakefs ticked, windows laptop
Help nothing happens after it saids Found PongoOS USB Device
solved. retry again.
I have also tried the laz method and solved it.
So my iphone 6s (ios 15.5) got past the "Booting Kernel..." phase but now it's been stuck on the same black screen with white for 20 minutes.
any fixes?
unplugging and replugging the lightning cable
rebooting and restarting still leads to getting stuck
Ok so I’m trying to install palera1n on my ubuntu computer but it keeps not working can someone help me here?
I have an iPhone 8 Plus running iOS 16.0.2
Yo is trollstore compatible with jailbroken iOS 16.1.1?
no
are you running in windows?
I try to restart the iphone and reactivate it with Palera1x, and it keeps looping in this interface, how to solve this problem
Yep windows with a ryzen cpu, going to try with intel rn
Hi,
What can I do if my iPhone 6s is stuck by ,,Booting Kernel‘‘ in the paler1n jailbreak?
Hi guys, is there any jailbreak for iphone 14 pro max with ios 16.3.1?
damn 😦 got banned twice already
Okay thanks
What do I do it’s been like this for 30 minutes
what iphone do you have
IPhone 6s
press ctrl and c and start again
Is this supposed to happen
does someone know a good bypass for revolut app (ios 15.7.3)?
windows will never work, get palenix or Ubuntu
Ya was running palenix on the usb my bad lel, but worked fine with an old intel laptop so ryzen was the problem i guess
Ty for the help
my phone is stuck booting pongo os and when i ctrl c it goes back to waiting for device
looks like erase all contents and settings fixed my problem for now
ok now im getting an new error in sileo
sudo apt update
Ign:1 https://repo.chariz.com ./ InRelease
Hit:2 https://repo.chariz.com ./ Release
Get:3 https://repo.palera.in ./ InRelease [4228 B]
Ign:4 https://havoc.app ./ InRelease
Hit:5 https://havoc.app ./ Release
Get:6 https://strap.palera.in iphoneos-arm64/1800 InRelease [8193 B]
Err:3 https://repo.palera.in ./ InRelease
The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 3D1B28A5FACCB53B
Err:6 https://strap.palera.in iphoneos-arm64/1800 InRelease
The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 3D1B28A5FACCB53B
Reading package lists... Error!
W: GPG error: https://repo.palera.in ./ InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 3D1B28A5FACCB53B
E: The repository 'https://repo.palera.in ./ InRelease' is not signed.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.
W: GPG error: https://strap.palera.in iphoneos-arm64/1800 InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 3D1B28A5FACCB53B
E: The repository 'https://strap.palera.in iphoneos-arm64/1800 InRelease' is not signed.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.
E: flAbsPath on /var/lib/dpkg/status failed - realpath (2: No such file or directory)
E: Could not open file - open (2: No such file or directory)
E: Problem opening
E: The package lists or status file could not be parsed or opened.
I can't install anything
Where do i find a video on how to jailbreak 13pm I’m on 15.5
nowhere because:
- YouTube is terrible
- you can’t jailbreak
I am looking to Jailbreak an iPhone 8 Plus that is on iOS 15.1 but I see that A11 devices need to have passcodes disabled while jailbroken. Does that mean I can't have a passcode at all?
Wait nvm reading the guide it does say I can't use any Passcode so i am going to have to pass.
I need help it’s been like this 30 minutes do I need to just wait longer or am I doing something wrong
on ios 15
is there a tweak
for older devices (like SE 1st gen)
where i can get iphone X dock
floatydock is infinite respring
Help my phone is stuck on this
iPhone 8 (CDMA) (iPhone10,1)
iPhone 8 Plus (CDMA) (iPhone10,2)
iPhone 8 (GSM) (iPhone10,4)
iPhone 8 Plus (GSM) (iPhone10,5)
A1863, A1864, A1897, A1898, A1899, A1905, A1906, A1907
16.4 beta 4 (20E5239b)
A11 chip (arm64)
How do I unjailbreak (rootfull)?
palera1n --force-revert -f
Which works best with palera1n...Sileo or Zebra?
Last time I used Sileo, it never gave me the option to respring/reboot after a tweak was installed. (I think it started to happen after I updated Sileo?)
Hey guys, is the new palerain untethered? Will it stay jailbroken even when the phone restarts?
No
Oh man, at least you can jailbreak using windows now. 😅😅
stop the command and restart the script
rootful and rootless
rootful requires fakefs/bindfs
rootless doesn't
make sure your using the rootless version of filza if you installed palera1n rootless
that can never happen
install [[autosigner]]
my iPhone SE 1st gen on 15.1 keeps crashing while jailbroken and reboots to normal mode. Good thing i ran it semi tethered so it will boot and not bootloop and kill the battery
is this a known issue on palera1n or just an issue with my device?
Is this normal
does anyone have an opinion on sticking with 15.6.1 or updating to 16.3.1? just about to jb a new iphone8
?
i suppose the only real question is tweaks available and compatible for IOS 15 vs 16
googles
i did hear that ios 16 currently is VERY BUGGY so i suggest to keep 15 for now
sounds solid to me
so weird planning a potential update on a JB
ive been on IOS10 for like 6+ years and it's totally F'd at the moment
kinda used to never being able to update this late in the game especially with so few JB's coming out anymore
would be nice to have apps that work again so i hope IOS15 stays mainstream supported for at least a few years
is anyone aware of a tweak similar to activator for IOS15?
what is activator?
Ryan Petrich created it long long long ago to change or create system wide actions
like sleep button also puts you in low power mode
or volume up + down = toggle flashlight
or double tap status bar to turn on x
oh
etc etc
this will be my first jailbreak with out it so far
super cool / useful stuff
long hold volume up/down to skip or pause music
just useful ass stuff
atleast the shortcuts app can do some of that but its still very limited
interesting
will have to check it out and thanks ... been using IOS10 for the last 6+ years so no idea what all's new
atleast shortcuts allows you to have low power mode turned on automatically at a specific battery %
i'll take what i can get 🙂
just miss it always being in low power when it's asleep
super battery saver
that does sound very useful
i rarely had to charge my 6s+
not even finding a tweak to let me customize home screen / icon sizes / amount per page etc..
do you know of anything?
no i barely have any tweaks on my iphone
not seeing any system wide adblock tweaks either
can i get the palera1n link
i saw it was udpated again 4 days ago do i have to do anything
never
Hi, when I try to run Palera1n with /palera1n.sh --tweaks 16.3.1 --semi-tethered, it says that this file is missing. I've never had this problem before.
any particular reason you’re using legacy palera1n and not palera1n-c
no, how can I change to paleran1n-c ?
Guide to installing palera1n
to convert your command from /palera1n.sh --tweaks 16.3.1 --semi-tethered, you will want to run palera1n -fc
or if your on a 16gb device: palera1n -Bf
and after it has created the fakefs, run palera1n -f
or if you want rootless simply do palera1n or palera1n -l
but before this i need to uninstall old palera1n ?
no you dont have to, it's optional
assuming you mean to remove palera1n from your computer
When selecting an option, select it with the space bar, then press Enter.
iPad Pro 11-inch (3rd generation) Wi-Fi (iPad13,4)
iPad Pro 11-inch (3rd generation) Wi-Fi + Cellular with mmWave (iPad13,5)
iPad Pro 11-inch (3rd generation) Wi-Fi + Cellular (iPad13,6)
iPad Pro 11-inch (3rd generation) Wi-Fi + Cellular (China mainland) (iPad13,7)
A2301, A2377, A2459, A2460
16.4 beta 4 (20E5239b)
M1 chip (arm64e)
iPhone 8 (CDMA) (iPhone10,1)
iPhone 8 Plus (CDMA) (iPhone10,2)
iPhone 8 (GSM) (iPhone10,4)
iPhone 8 Plus (GSM) (iPhone10,5)
A1863, A1864, A1897, A1898, A1899, A1905, A1906, A1907
16.4 beta 4 (20E5239b)
A11 chip (arm64)
will pale work on a iphone xr

