#palera1n
1 messages · Page 31 of 1
How long did you hold the power button down for
Could you get out the entire time?
So it’s still stuck
it stays there if i jailbreak or restore root
And you can’t exit it? Or can you?
yes of course! I do forced reboot and manage to be in my IOS
Ok nice
I have a question can I restore from my IOS
Yea
Don’t do iTunes restore
Or it’ll update
Go into stock iOS, settings, general, and at the bottom it should say erase
Thanks my bro!
I wouldn’t recommend making a backup while you have jb files tho
Because apps can detect that
ok and it will be back to normal with full partitions
I’m quite sure, yes
It’s what I did and I still have 30gb left on my 64gb
But most of that is downloaded movies
Using the old palera1n.sh and iproxy goes through the process, but the respring process never happens and the app doesn't show up.
After jb, if you do upgrade all, there’s a risk that diskdev-cmds gets updated which messes up the jb.
Google it bruv. And use an intel based PC or a Mac.
yes
hey, is there a tweak for passcode on a11 devices or they have to be without passcode always
Fake passcode for checkra1n on A11 devices running iOS 14+
@strong ingot hey, remember me? All working fine! And i have a question, in future will be update for a passcode and touch ID on Iphone A1784 A10?
how to delete it?
It looks like the changes that were removed, from the Github repo, has fixed the issue.
in the future yes it's possible
Hey, I restored root fs and jailbroke again but the app is not there. I restored my iPhone in dfu mode and did the whole process again but the app isn’t there. I waited for more than 3 minutes and the app isn’t there. I feel hopeless. Anybody somebody help please
Same here, I am using IphoneX and 16.2 version, everything smooth but it does not respring, the app does not installed, even I tried shortcuts and tips.
P.S. it was mentioned that the tips does not work anymore
I thought it was just my device! I restored from IOS, and I'm still in 15.3.1 and nothing does not restoreroot does not jailbreak it always gets stuck in the middle of the process, there is no way to jailbreak again and try thousands of ways
same
please i need help
phase one done, phone does not boot
did some research
restored rootfs
stuck at waiting for device
mclovin
Back on da ground
Mclovin
holy shit how do you have that windows curved bar
that looks awesome
tell
Go the microsoft store
Go to the microsoft store
then
Enjoy
why is the command not running? I am new to Jailbreaking.
It did run
You got to to the second command to connect
sudo usbmuxd -f -p
Still no palera1n
So uh, my phone seems to be stuck in ramdisk mode
keeps saying no connected device found
New connection for 6413->22, fd = 5
waiting for connection
I quit and when I retry the command, it says :
[*] Waiting for devices
[*] Detected ramdisk mode device
[*] Rebooting device in SSH Ramdisk
Creating listening port 6413 for device port 22
kex_exchange_identification: read: Connection reset by peer
Connection reset by ::1 port 6413
[-] An error occurred
[*] A failure log has been
iPhone X with iOS 16.2, will need some help here🙏🙏
Hello, can I downgrade 16.2 to 15 for jb?
If I reset all settings will that delete Palerai1n jb??
I’m having an issue with my keyboard and it seems non-jb related
I have plenty of tweaks installed
And trollstore
Sorry if I'm being dumb, but does checkl0ck not allow passcode options other than the 6-digits one? I just can't press the "Passcode Options" button for some reason
neither can I press "Cancel" while changing the password, hmmm
Tried disabling GesturesXV, didn't work
Checkl0ck does work though, with Touch ID and everything, but I really want the custom password option lol
Oh, seems to be an issue with lockdown beta, too
So I guess there's a conflicting tweak or something
hello everyone
i just got a new iphone xr
but im wondoring can i jailbreak it
the ios version is 16.1.1
but i was also wondoring will i get anything banned
or any consequences
and can i jailbreak my decive with windows 10
No, no and no
why cant i jailbreak it
Because theres no jailbreak for it?
but it says this
this is palera1n
Thats for phones <A12
A11 and lower
Palerain only supports the checkmate exploit or whatever
so isnt there any other way i can jailbreak it
or get free games
thats all i want
bruh
my iPad on 15.7.2 jailbreaked with Palera1n but all what i Install from Sileo are not on Springboard.. and uICache dont work for me any ideas ?
How are the tweaks on palera1n? Can you use cylinder and can you use Appsync Unified?
Can this jailbreak bypass remote management
jailbroken with palera1n there is no palera1n app or package manager, i tried the thing where you would make a shortcut that would open it, but i still can't find the app sadly
anything i can do
i tried a respring and etc nothing worked, help
Palera1n supports A12 on 15.4.1?
No?
Was boutta be happy af
Its for checkm8 devices, so from A5-A11
dayum
But I got a A10 laying around
What do that mean again?
jailbreak every restart right?
Help please
you computer is needed everytime you reboot
Ooh shit that's even worse but it's alright if you charge before it hits 0%
I mean
There are tweaks that put it in fake shutdown mode when your battery goes at a certain percentage so you can plug it and then press the screen to re-open it, so that way it'll save as much battery until you can recharge it
Anyone?
Yeah sentinel or sth
exactly
palera1n works on AMD CPUs?
nope
Let me try
jbinit DIED!
Bruh somany packaging issues
I aint willing to put in effort to get all libraries on this live linux
F it
run ls and show me what it says
oh my bad xd
lowercase
try run sudo apt install curl
What is the difference between the rootfull with pongoOS and the current palera1n?
got this now
sudo apt install python3-pip
is that all good now?
try sudo apt update and then sudo apt install python3-pip again
same issue
hmmm idk then
@warped horizon know anything for this issue?
is it impossible to run palera1n on ryzen machines?
on most of them yeah
most processors dont
yes
I'm trying to follow the instructions in the pinned message, but I'm not finding the text from the screenshot
well i guess thats it
why does it say Package 'git' has no installation candidate?
Try sudo apt update
Got this
Now install git
can cydia be downloaded on Pale?
palera1n loader app can install cydia, but it's strongly recommended that you do not use cydia with palera1n because it's broken as hell
im new to jailbreaking what are some good apps i can get
what do i do here
u wait could take 10mins
ok thanks
how do i reboot it to normal mode from dfu
do the force reset button combination for your device (hopefully restoring the device won't be needed)
im in recovery now and it says press any key when ready for DFU mode. Do i put it in dfu mode first or press the key first?
Press key
Can someone please help me jailbreak this?
I don’t know what’s going on with my one
If you did “Upgrade All” within Sileo after jb, probably diskdev-cmds got updated, messing up your jb. But I’m just guessing here.
If palera1n and Sileo is launching without a problem, jb might be all good btw.
You can try “Do All” within palera1n app (available when you hit the gearbox icon) as well.
Hi guys so I was able to jailbreak fine last night but after hitting “restart springboard” on sileo, my phone just turned black and up til the next morning has zero response on anything I press ( tried force restart etc ). This is iOS 15.0.2 iPhone X
Do I just wait for it to die then recharge? Or is there something else?
Hi everyone, i'm attempting to jailbreak my ipad but for some reason it brings up an error message almost beffore it finishes. can anyone help me?
here is the log
why are my widgets like this? I’ve been jailbroken for a while
I would just reboot if I were u
Then re jailbreak
Coz it sounds like u buggered ur phone
Unfortunately I can’t
How come
It feels like device is just dead…
Add volume button down volume button then hold side button till ur phone gets apple logo
Buttons have no response, screen is black , tried force reboot etc all resulted negative
Doesn’t do anything
U have imazing
Or iTunes backup
Or ask on palera1n discord because I’m sure others have had the same issue
Actually u could try rejailbraiking with palera1n
Will try to poke around after I’m off work
K
Can you use palera1n on a Mac vm?
no
any help with iPhone X?
i do all the .sh process, everything is fine, but no final respring or palera1n icon on springboard
between stage1 and stage2 did it fail to enter DFU making you rerun the script?
Anybody had any luck trying the new checkra1n version? For me when the ramdisk is trying to boot it crashes (iPhone 7) and ends up in recovery so checkrain fails
Hello, how can i jailbrake my phone? iPhone 11
I jailbroke and installed tweaks however after a reboot and rejailbreak, all my tweaks work flawlessly but they don’t show as installed in sileo. Is this a known issue or is there a way to fix it? IphoneX ios 15.6 rc
no
Whenever I try to install a .deb file it stays this. Anyone know the solution?
What is there to be solved? It looks like the installation went through. Check on your package manager (Sileo) and see if your package installed.
Otherwise, try opening the .deb file into Sileo using a file manager (Filza). There could be some missing critical dependencies, but the terminal should’ve alerted you have that been the case.
I say there is an issue because every time I open an app with the deb file installed the app crashes (and yes the package was installed).
That sounds quite odd. What does the package exactly do?
It’s just a Deb file for a game.
But what is it supposed to do? And what’s the name of the game?
Dragon ball legends with mod menu
Interesting. Although I cannot seem to tell the root cause of this, my best bet would be that you backup your game into an ipa or find the ipa online somewhere, inject this deb into it using Sideloadly and then install it to your phone using Filza and AppSync Unified.
So that you can isolate the deb to the app only
how do you backup into a ipa
Or, you could use a tweak switcher like Choicy or Libhooker (if your jailbreak uses procursus bootstrap) and turn off the tweak globally but enable it only for your app
You could read this: https://www.reddit.com/r/jailbreak/comments/j7vjwb/tutorial_how_to_convert_appalready_installed_to/?utm_source=share&utm_medium=ios_app&utm_name=iossmf
295 votes and 60 comments so far on Reddit
ok thanks for the help
Why do I have to erase when using iOS 16?
Why did I only find out about this just now? This would have helped me out when I had 15.1
didn’t need that when i had to reboot my iPhone to have widgets look normal again, didn’t want a black bar at the bottom of widgets
To rejailbreak, is there a specific commend or do I do the same setups as jailbreaking for first time?
Yes
It’ll be faster when rejailbreaking because it’s only re-enabling tweaks.
how
works just fine for me, disabled every tweak except for tweaks just for YouTube and it allowed YouTube to open just fine
how, are you using sileo or cydia?
really?
Sileo
It installs fine for me but doesn't work on any app
can you possibly screenshot your list of packages in sileo
Is it because you're using a 4s that it works for you? or not related
that’s just old, I want to change it, but I don’t have nitro anymore. I changed it to say that back when I was using an iPhone 4S somehow. I’m using an iPhone 7 now.
Ok i'm on 7+. Not sure why choicy or A-bypass doesn't work. They install fine
What does Libhooker-shim do
idk
okay choicy works for palera1n
it installs fine for me but doesnt work on any app they all still crash
any idea what might be causing this
3d touch and press “launch without tweaks”
Okay so after rejailbreaking, I can’t do “do all” but can launch Sileo…
When I say I can’t do, I mean it’s on respring loop
restore rootfs. probably installed a broken tweak
it's for tweaks that require libhooker but you have substrate or substitute
mostly just a few cs tweaks
ios 16 introduced a bit more security which doesn't let us boot jailbroken if a passcode was ever set while on 16
app loads and immediately crashes
Libhooker configurator when I was on Ios 13.5 used to work flawlessly
you asked what libhooker-shim was
Yes. I was hoping it would allow libhooker configuration type settings
Am I facing an issue with tweaks because my old JB used Libhooker rather than Substitute? Thats not related right
After pulling latest from palera1n repo,
I am getting this error:
[] Booting ramdisk
usb_timeout: 5
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8015
Found the USB handle.
Now you can boot untrusted images.
usb_timeout: 5
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
Found the USB handle.
[==================================================] 100.0%
[==================================================] 100.0%
[==================================================] 100.0%
[==================================================] 100.0%
[==================================================] 100.0%
[==================================================] 100.0%
[==================================================] 100.0%
[] Testing for baseband presence
Connection to localhost closed by remote host.
kex_exchange_identification: read: Connection reset by peer
Connection to localhost closed by remote host.
[-] An error occurred
[] A failure log has been made. If you're going ask for help, please attach the latest log.*
My iPhone showing Palera1n Disk. Nothing else.
Guys what must have tweaks to install and from which repo?
iphone 8 ios 16.2 i just finished the process of the palera1n jailbreak but nothing happened to my phone when it rebooted what do i do?
Finished phase 1?
yeah @wispy shell
Put your device in dfu and run the commend again
okay thanks @wispy shell
Hell guys i need some help with palera1n when i put my device in dfu mode the program starts creating a ram disk it takes a long time and then it responds with an error occurred this is the log (sorry for the low quality )
[] Testing for baseband presence
Connection to localhost closed by remote host.
kex_exchange_identification: read: Connection reset by peer
Connection to localhost closed by remote host.
[-] An error occurred
[] A failure log has been made. If you're going ask for help, please attach the latest log.*
Is there a separate thread for checkra1n version of palera1n?
hi, i jailbroke my iphone x on ios 16.0.3, it says it’s successfully jailbroken but i cant see the palera1n app
anyone has a fix??
How I can get rid of this I’m using palera1n JB
did anyone else face this issue? i made sure developer mode is on too!
Hi guys, i would to ask if someone else get this problem or know how to fix. I tried to reconnect the device but nothing changes
try brew update
then try again
seems that resolved the issue, atm i'm waiting for finishing jb process
Thank you
Any solution? Not re- jailbreak and nor restorerootfs! both options are like this, phone enters ios after hard reset
If you're trying to restore rootfs, just do ./palera1n.sh --restorerootfs
without the other args
it doesn't matter if it's semitreated
Not working! 🤬I have tried it in thousands of ways!
Pleasure to help
Someone advice to install permanent version intead of session version?
That is the jb
Incredible, I restored my iPhone X, it was clean! I tried to do the palera1n and nothing at all! I do not know what to do!
Put your device into dfu mode first with ./palera1n.sh —dfuhelper then jailbreak
Rebooted 3 times no luck
could one of you hop on and explain to me what im doing wrong please
How many people here are s****d
Mojave is too old, not gonna work
which one do i get then
😂🤣, I already tried anyway!
catalina ?
Que da alli!
Big Sur and up I believe
stay there
will it work if i set up a kvm of bigsur ?
Probably not because usb pass through is weird and doesn’t work most of the time
I would just throw Linux on a non-Mac device if you can
would a live usb be fine ?
Live usb should be fine, but for low ram devices you will need to install most likely
Try live booting first though
i have 16gb in my pc so im good on that
just wait until it frees itself
Like when
kvm should be fine if you pass through a usb controller but idk why one would go through all that trouble
now im stuck on another thing
i need help
can i jailbreak my iphone 8 15.1 without a usb?
nope
Really I need to get 1 then
What can I do here?
@silent anchor Where should the tweak settings for April appear, in settings?
you can throw linux on a mac device too 💀
i have a problem so my iphone 7 exits dfu mode under a minute and its annoying
someone please help
u usin a usb c cable
No
anyone know how to use passcode with jailbreak
if you have an A10 device, use the checkra1n branch
no
anyone know how to fix this
i think it's a wrong command
it should be like this
./palera1n.sh --tweaks <iOS version you're on> --semi-tethered
and in your case it is
./palera1n.sh --tweaks 16.1.2 --semi-tethered
im trying to remove palera1n
oh
ok
wrong comannd @elfin iron
./palera1n.sh --restorerootfs 16.1.2
you didn't write the t at the end of root
oh thank you
ah ok
Did restorerootfs but still seeing palera1n icon
So I’m having trouble putting my iPhone X on 15.1 in to DFU mode. The troubleshooting guide on cfw mentions that you need iTunes of some sort for it to work. I remember checkra1n being able to do it without iTunes though. Is there a way I can put my device in to DFU mode without leaving ubuntu or can I somehow use the DFU mode enabled in windows in ubuntu?
there should be a dfu helper built into palera1n
The guide says to put the device in to dfu before running so I didn’t even try running it yet because I haven’t managed to get dfu working
with the other tweaks
under TV Provider
or under gamecenter
Can you see the list of tweaks? If so, you can’t find the April tweak?
wait a minute
ill install it again
what do u do
the tweak settings appear
If you can see a list of configurable tweaks, then the preferenceloader package should be installed. Consequently, April should appear in your settings. If not, there might be a root cause deep below the hood that may require restoring rootfs
it does not work
it just installed as a tweak
no work
Have you checked if the tweak has palera1n support?
there are tweaks that work without typed on it palera1n support
bun no problem
any alternative ?
how long can i typically expect it to stay on inflating: gaster during the install process?
it hasn't gone away for the past 10 minutes
are you using an amd pc
I’m afraid not. I hardly use theme-related tweaks. Also, I shouldn’t really be helping you since I don’t use palera1n, but I try to be as helpful as possible with what I learned with the current jailbreak scene.
Also, I saw that you were using Cydia. I think you were hostilely Sileosplained, and although it’s for the better of your device, I’ll give you a more sober take on it:
Cydia has not been actively maintained and paid tweaks are no longer purchasable there. You can use it, but it’s more appropriate for older, legacy devices like an iPhone 4 or iPad 2.
That is why you are encouraged to use more recent package managers like Sileo and Zebra, to ensure proper jailbreak functionality and avoid breakage.
Does it work for IPhone X GSM IOS 16.0 which is ”locked for owner”
I tried it but got this error:
Have I missed something??
If I were you, I’d have Zebra installed alongside Sileo in case either one of those package managers are not working properly for whatever reason
thank u anyway
Sure do!
r u using usb-c ?
No but using USB-hub
yes, but checkra1n used to work fine for me despite working for literally nobody else so I assumed it wouldn't be an issue in this case either
run the command again but dont use any external things
just connect the phone with pc dirctly
I got this error. The phone is connected to pc directly.
i cant help
i dont know how to use it in linux
Thanks anyway💐
I’m new here. If you know someone who can help, tag him
i cant tag anyone
just send ur probelm here #jailbreak and they may help u
Thanks 😊
u r welcome
This doesnt work for most of us.
Is jailbreak possible on iPhone 11 15.6.1
no
does jailbreak work on my iphone x ios 16.2 that currently has a password or would i have to remove it?
u need to reset ur phone or program it using itunes and don’t use a passcode on ios 16
The last jailbreakable version of ios 15 was ios 15.1 (correct me if i'm wrong)
On the iphone 11
main: Writing out patched file to work/kcache.patched...
main: Quitting...
krnl
dtre
rtsc
rdsk
/dev/disk4 /private/tmp/SSHRD
"disk4" ejected.
Reading work/ramdisk.dmg...
IM4P outputted to: work/ramdisk.im4p
Reading work/ramdisk.im4p...
Reading work/IM4M...
Creating Image4...
Image4 file outputted to: sshramdisk/ramdisk.img4
none
[*] Booting ramdisk
usb_timeout: 5
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8015
Found the USB handle.
Now you can boot untrusted images.
usb_timeout: 5
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
Found the USB handle.
[==================================================] 100.0%
ERROR: Unable to connect to device
[-] An error occurred
[-] An error occurred
[*] A failure log has been made. If you're going ask for help, please attach the latest log.
~/palera1n
So no passcode means ever ? Meaning a factory reset ?
yes, if on A11
and on ios 16
Go in #bot-commands and use /canijailbreak
guys will palera1n work on ios 16.2 on a iphone 13 mini?
I believe not, cos palera1n runs on A8-11 (https://github.com/palera1n/palera1n) and the 13s are A15 (https://www.apple.com/au/iphone-13/specs/)
forgot how slow catalina is on 4gb ram
is it worth factory reset? hows tweak compat looking on 16?
its decent, a lot of stuff works but of course not everything does
also its worth mentioning palera1n kinda has issues on 16.2 so if you do update you should probably go to 16.1.2
I’m on 15.5 beta 4 what would the version be in the command?
when i reboot my device i've to reinstall just palera1n from application or i've to connect to my pc and send the command again? (semi-tethered)
you have to use the pc
Any solution?
Any jailbrek detection bypasser for palera1n that works as well as vnodebypass
do I need to remove the icloud stuff from my device to be able to jailbreak
I've been messing around for maybe a day trying to get palera1n working without asking dumb questions. I'm new to the jb world, so be gentle 😂
I've finally got the jb running (sooooo many attempts 🤦🏼♂️), and have got Sileo installed. I've got around the issue of the app icons using the shortcut method @silent anchor posted earlier (thanks mate!) and that's ok for running palera1n and Sileo, but when I went to run Filza (again, through shortcuts) it'll flash up a white screen and then go back to the homescreen immediately.
Have I missed something obvious?
Running iPad mini 4, on iOS 15.7.1
Help please
please type it exactly if yoy'd like to proceed Otherwise remove -- tweaks or add -- semi-tethered
Palera1n
load preferences in style
Hello!
So the iPhone 7 jailbreak is palera1n?
for ios 15 yes
for ios 14 and lower use something else
iOS 15, on windows how I do it?
Hi are Ubuntu live USBs supported? I'm trying to use a 22.10 live USB but encounter all sorts of errors regarding pip when I try to run palera1n
How do I fix this? I have reconnected the device multiple times and ran the pair commands but it doesn’t go further than this!
your typing a wrong command
./palera1n.sh --tweaks 15.7.2 --semi-tethered
@lime oyster
use this
how much space do you have on you device @lime oyster ?
No because my iPhone has only 16 GB storage so I’m using the other command
Well that’s what I’m using already
Still the same error
I'm getting this same error now, did you find a solution? I'm using an iPhone 8 on iOS 15.0.2 with Ubuntu 20.04
How can i git clone pongos palera1n
Is IOS 16.2 recommended or is there a better version to downgrade to?
this jailbreak really have issues with AMD cpu pc?
I am getting this error: "parse error: Invalid numeric literal at line 1, column 10 " when jailbreaking on mac with iphone 8 on ios 15.1
palera1n.sh seems to fail. You need to debug the bash script. It might be due to curl or stg else. You might try installing brew then python3 and curl
Yes
Trustcache error while creating ramdisk iPhone 7 Plus 15.7.1 any suggestions?
??
having a small issue currently , i have attached the log
does palera1n really not work on a VMachine?
it didnt do it fully -_-
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
Found the USB handle.
[-] An error occurred
[-] An error occurred
it came up with this
Try to use an other cable in a other port of your computer for me this method works
i only have 2 ports 😦 macbook pro late 2017
Ive bought an adaptor for it comes tomorrow
Will give that a try
Oh sorry forgot the device ,
Iphone 7 15.7.2
it doesnt
Does it work with M1 devices?
I do have the same question I get the same invalid numeral in line 10
When I debug it it says that buildid =null
This here is the part of the debug that seems to fail
The debug I get is
- [[ iPhone10,6 == \i\P\a\d ]]
- [[ iPhone10,6 == \i\P\o\d ]]
- device_os=iOS
- device=iPhone
++ curl -sL https://api.ipsw.me/v4/ipsw/6.2
++ /Users/panagiotisnanousis/palera1n/binaries/Darwin/jq '[.[] | select(.identifier | startswith("iPhone")) | .buildid][0]' --raw-output - buildid=null
- '[' null == 19B75 ']'
++ curl -sL 'https://api.appledb.dev/ios/iOS;null.json'
++ /Users/panagiotisnanousis/palera1n/binaries/Darwin/jq -r '.devices["iPhone10,6"].ipsw'
parse error: Invalid numeric literal at line 1, column 10 - ipswurl=
- _exit_handler
- '[' 4 -eq 0 ']'
- echo '[-] An error occurred'
[-] An error occurred - '[' -d logs ']'
it cannot jailbreak m1 devices but you can use m1 to jailbreak other devices
Any idea on my problem? 😅 currently installing it on my Linux machine to test it as well
Any fix found for the app icon / app not installing ? iPhone X 15.4.1?
Already tried the shortcut thing aswell
So I got it to work with my Ubuntu machine. Are we sure M1 Mac’s are supported?
so I guess I have to download linux and revert back to windows
they should be, but M1 has weird usb stack issues so it may not really work (it has similar issues with checkra1n as well)
or live boot
me too
hey, i get this message when trying to do a git pull for my stuff. how do i correct it?
Guys is there any way on windows?
no
15.6 RC is still signed
ye
i do i enter jailbroken mode without tweaks enabled/safe mode
i installed a bad tweak which caused respring loop
how*
How do I use Linux with palera1n?
Restarted the mac and it worked
still have an issue?
can help you if you want
That’s be great
fixed
Oof
Root@localhost permmison denied (publickey/password)
@lean acorn
ye
How?
No such file or directory
just follow these simple steps bruv
Guide to installing palera1n
lmk if you need any help
but it's pretty forward
Got it
Got it running after a couple of tries
Using a 3080 with Linux? Seems fine lol
Stop downloading guis from twitter ffs
That particular one was made by very sketchy people who stole code
Do not download the jailbreak from anywhere else, ever
If you need a guide, follow https://ios.cfw.guide/installing-palera1n
Guide to installing palera1n
I would follow the guide a posted above, you downloaded an old version
Did you put your device into dfu first manually?
Yup
Then try running the script in normal mode
What device?
iPad 6th gen 16.2
Oof
Wat
You’ll need to disable passcode and touchid, then wipe the device
Neither 1 are active
Have you enabled either since wiping the device?
Nope
What does the terminal say?
Try running sudo ./palera1n.sh clean then rejailbreak
You shouldn’t need to wipe the device again
Note that lots of stuff is broken on 16.2 though
iMessage for example does not work on 16.2
Then just do sudo ./palera1n.sh clean then try jailbreaking again
has anyone face this problem its not letting me install anything from app store
Are you on iOS 16.2
yes
You’ll need to restore to 15.6rc
i noticed also when u said that imessage its not working
16.2 is very broken atm
i can already see
Most Apple services don’t work at all
only ios 16.2 is signed
15.6rc is still signed
Is it signed?
Yes
Can’t find it
Select betas
Scroll down to 15.6rc1
It’s quite far down
Press the download button and choose your device
Right click restore in iTunes and select the downloaded ipsw
This will wipe ur device
And restore it to 15.6rc
i can see it says 15.7.2 is signed
You have enable betas
Click the beta thing at the top
Wait nvm iPadOS 15.6rc isn’t signed
Ah
Oof
does ios 15.7.2 work
15.7.2 is not signed
Try deleting the entire palera1n folder then recloneing the repo
Trying now
15.6 rc 1 or rc 2 was signed?
For iPadOS?
I’m asking for iPad lmao
Hi, Im trying to JB a 7plus running 15.7.2 using Palera1n.
Ran the first step in DFU mode and device reboots to normal state after creating ramdisk. Could anyone help?
Only 16.2 is signed for iPads
Are you on amd by chance?
You should be good there
Maybe try downloading an older version from GitHub releases this time
Device isn’t booting?
Did the device respring?
Open the log
It’s open
What’s does it say?
Where?
Is there stuff about sep?
Where do I see that?
Can you just send a picture of the log?
I would just restorerootfs and try again
How do I do that
You can find instructions for that by running !t restorerootfs in the palera1n server
After this process just try to jailbreak again
Repeat the whole thing a few times, if it still doesn’t work, maybe wipe the device
For restoring?
Also make sure you use a usb a cable, not a usb c cable
Let’s try this again
Gonna skip everything and hope the best
Wait, do I have to manually put it in dfu mode before hand?
@uneven rover
yes
I am lol
Just recorded this
It restoring but no palera1n app
Resprung
No panic tho
ok so whats the issue
Did you try using Shortcuts app to Open App > Palera1n? That worked for me when no app icon
yes use the shortcut app, you can google that, you will find it in some reddit post
or you can just make one yourself in the shortcuts app
Wut
So all this time it could’ve worked
But I didn’t know
I’m downgrading to 15.6rc
anyone know why I get stuck when trying to sign into apple id?
There is no official gui
Stop downloading weird stuff from twitter
That’s the only official source for palera1n
Wat
Did you follow https://ios.cfw.guide/installing-palera1n
Guide to installing palera1n
Did you do the usbmuxd stuff
Just recorded a whole 5 minute video
Honestly wait a few months for the jailbreak to be more stable
Try putting your device in dfu mode first then running the script
just wait until it finishes
It might be my cable causing connection to go out
Cable is broken
And it not fully working
Put the device in dfu mode first then jailbreak
Also make sure to use a usb a cable, not a usb c cable
You can use an adapter if you need to
Amd CPU’s also have issues
Is it normal for no icons to appear, and for apps not to show when you double-tap home button (on older ipads)?
hi everyone. I uses ipad pro 10.5 (A1701). I am try jailbreak from yesterday but still my hand empty. Today I try again, everything is done, device make re-spring but there is not palera1n app 😦 My version is still 16.2. Can anyone help me ?
Hey, how do i refresh uicache after a rootrestorefs? i still have Substitue Zebra etc. on my homescreen..
Either through TrollStore (Rebuild Icon Cache and then Respring) or changing language in the settings
thanks
Connect to Internet
I have a question will this jailbrake work with the IP 13 pro Max or IP se 2020 ?
considering updating to latest update on A9 device (15.7.2)
how is palera1n im currently using uncover on 11
not great
tweak compatibility (rootful, iOS 15) is... you know, i'd say around 4% of tweaks work with palera1n
around 15% if you resign the binaries in said tweaks before installing them
with 16 it's worse
and with rootless... i'd say there are like 20 tweaks working over there
anyone know what is the cause for having iphone stuck at black screen after palera1n saying the device should now boot to IOS ?
with autopatch/dirtypatch it gets slightly better, but those are still experimental and will likely bootloop you if you use them incorrectly
restorerootfs
clean
and try again
that happens when the downloading process is interrupted
wdym
Guys i need help with my palera1n log
Maybe send the log
Nvm didn't read the pins, thanks a lot. was stuck in recovery mode apparently
@gloomy bramble
you ran out of RAM
How to fix it ?
Damn
I used a lightening to usb c cable
It took a few tries but it worked in the end
Try setting it to one version lower
Eg. If youre on 15.7.2
Set it to 15.7.1 , run it then let it do its thing
It will fail then reboot the device , dfu mode it again
Then run it on your actual version , it should complete
No. Only iphone 6s to X
Mhm
hi guys I'm on an iPhone 7 plus running iOS 15.7.1 I successfully installed palera1n but the app is nowhere to be seen what should I do
restart your phone
When I boot with palera1n, the screen stay black… what should I do ?
Anybody know where to find info on what to put into terminal for palera1n virtual
Install these shortcuts:
Palera1n shortcut (https://www.icloud.com/shortcuts/8cd5f489c8854ee0ab9ee38f2e62f87d)
Sileo shortcut (https://www.icloud.com/shortcuts/d675bc66fe5342fdaa1c1c9a0150b9cc)
Troll Helper shortcut (https://www.icloud.com/shortcuts/bd50bf9c8b714cd79e49bd8e2e0972e4)
Then
-
Open the Palera1n Loader shortcut and run Install then Respring
-
Open the Sileo shortcut and do all updates and restart Sileo
-
Open Sileo shortcut again and install TrollStore Helper
-
Open the Troll Helper shortcut
-
Install TrollStore
Icons have all reappeared !!!
from reddit
is thetering
i do i completely remove the jb? when i remove it , my apps still tell me that i cant use them because device is jailbroken when its not anymore
I dont find a good tutorial how to make my phone
great server
Any idea where to find terminal commands for iOS 16 iPhone 13 for virtual?
you have a fake jailbreak
it's been saying this for a few minutes now, what do i do?
what happens if my phone is locked
like i havent used it in years
and i lost my icloud acc
can i jb
not with palera1n
ok
My phone isn’t detected on ubuntu
I press trust and enter my pin but nothing happens
My phone is charging and I am using original apple cable
This keeps happening when I try to use palera1n anyone know how to fix?
And the phone just has the palera1n logo thing with a black screen
run the first two commads in another terminal window to make a connection with your iphone
then on a different terminal tab run the jb command
waiting for a fix for my device to jailbreak
im sorry this is OTP, does anyone know why it can’t initialize wifi adapter or is it because of rootless jailbreak of palera1n?!
Hey guys, so does anyone know whether tetherme works on palerain?
My iPhone 7+ goes into recovery mode, but when I try to go to DFU mode it just keeps getting back to recovery mode how to fix? I'm trying to jailbreak btw
Is your lightning cable USB-C or USB-A?
USB-C To Lightning Cable
That's the problem, unfortunately the USB-C to lightning cables can't put the phone in DFU mode, You need a USB-A to lightning (with an adapter if needed)
Alright I see now
thanks
Is it possible to jailbreak using windows? since my mac doesn't have USB-A
You would need to live boot Linux
You could also use an adapter
Usb c to a adapter, usb a to lightning cable
no you can’t, you need to live boot linux off of a usb, which is not using windows
mb
all good
Anyone removed palera1n using windows?
Weird people saying that you cant dfu with a type C to lightening cable
So what did i do because i managed to dfu and jailbreak successfully with that cable
must have been blessed by the heavens
Possibly 😅
It did take a few tries to get palerain installed tho
was it an apple cable
It wasnt , it is a 3m third party cable
yeah thats why
some 3rd party cables like anker ones can enter dfu properly
but official ones will not
Eww apple tryna mess people about 😅
I try to go on dfu mode on ubuntu
I cant
After 4hours of tryng no chanse
My iphone dont want to stay on dfu after 1-2 min come apple logo
Need to be quicker
any idea how to fix this?
hey i got "main: Error doing patch_rsa_check()!" while trying to jb my ipad 5 on ipados 16.1.1 do you have any idea on how to fix this ?
For jailbreak I need to disable find my iPhone and logout form Apple ID or no need?
i hope this is the right place to ask
so i realized the exploit needed to JB my phone is palera1n, only problem is that idk how to dual boot linux from windows 10 (so clients like ubuntu and all of that)
i've tried using stuff like booting off of USB and just clicking the "try ubuntu" thing
but it just gave me a mess of random colors and a few errors
i'm running an intel CPU, if that helps
I’m now installing Ubuntu but decided to disconnect all disk from laptop and connect other clear where will install Linux it’s fastest way I think
oh, thanks for the info
install [[autosign]] then reinstall newterm
you should also install filzafixer and palera1n strap from that repo if you haven’t already
filzafixer is deprecated heavily
I can go my phone to dfu mode
I try all
Dont want
Ios 15.7.2
I can’t go to dfu mode
Over 100 time intry
Dfu
!dfu
Hey there. I've faced this problem;
download succeeded
../Linux/PlistBuddy: /lib/x86_64-linux-gnu/libstdc++.so.6: version GLIBCXX_3.4.29' not found (required by ../Linux/PlistBuddy) ../Linux/PlistBuddy: /lib/x86_64-linux-gnu/libc.so.6: version GLIBC_2.33' not found (required by ../Linux/PlistBuddy)
../Linux/PlistBuddy: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.34' not found (required by ../Linux/PlistBuddy)
Version: 3fc8c093f4660f6c6e07c0c9214618733da01ffc - 36
libfragmentzip version: 0.60-120447d0f410dffb49948fa155467fc5d91ca3c8
init pzb: https://updates.cdn-apple.com/2022SummerFCS/fullrestores/012-41753/03DF14B7-8351-497E-B02E-188251541117/iPhone_4.0_64bit_15.6_19G71_Restore.ipsw
init done
Error: file Firmware/.trustcache does not exist, or is a directory
[-] An error occurred
[-] An error occurred
[*] A failure log has been made. If you're going ask for help, please attach the latest log.
I'm running ZorinOS 16.2 as my main OS, there are no other Windows or whatever. I'm trying to run Palera1n on iPhone SE 1st Gen running iOS 15.0.2.
I’ve been stuck here, need help
When I tried jailbreaking my iphone 7 with Palera1n, I saw that I needed to stop the usbmuxd and then start it again. Sadly, I didnt see at the beginning that I needed to do the command again if the device was disconnecting. So now the phone wont boot and I am stuck
do you have an amd cpu
just force reboot
!t reoot
!t reboot
iPhone 8 or newer (including all notched devices, iPhone SE 2020 and newer):
- Press volume up
- Press volume down
- Press and hold the side button for 10-20 seconds until the Apple logo appears
iPhone 7:
- Press and hold the volume down and power buttons for 10-20 seconds until the Apple logo appears
iPhone 6S/SE 2016/iPad 8th or older:
- Press and hold the home and power buttons for 10-20 seconds until the Apple logo appears
hi,
Currently on Win 11 22H2, using PowerShell _7.3.1 or a lower and i might have misunderstood few things but after entering "sudo...." i always get this error"sudo: The term 'sudo' is not recognized as a name of a cmdlet, function, script file, or executable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again"\
for the Palera1n JB of course
Use xubuntu OS
It will solve that error
Reclone palera1n or just Restart your iDevice, then try again.
Ok, i l try now. Thanks.
how i can unlock iphone se 1st gen with palera1n on windows?
So strange. Apps dont show 😐
you should join their discord. they have a nice support if you provide them enough information
did i violate somthing?
check rule 5
I have an iPhone X running 16.2 laying around I want to jailbreak that device is it possible to do it with windows 11?
You’ll have to boot the computer into Linux, but it’s possible
Is ROCKETBOOTSTRAP okay with Palera1n? If it’s not, why?
how can i jailbreak
it is but you need to have either autosign installed or the knowledge to resign everything rocketbootstrap yourself
Help pls
sudo apt install git-all
Why is it not working ??
Does it work on an AMD FX PC?
if its a laptop; maybe, if its a desktop; probably not
Why getting error straight away
What went wrong trying check ra1n branch of palera1n
How do I fix my iPad booting up when creating ramdisk shows?
+1
Me to
stop using that fuckin gui
I have not used gui I hv used official palera1n page checkra1n branch .
Getting error straight away
Yo should I update my phone to iOS 15.7.2??
should i upgrade to ios 16 with iphone x jbroken on ios 13
depends what your reason for jailbreak is
youtube whatsapp and some homescreen mods
what tweaks are you using for yt and wa
Im jailbreaking my IPAD 5th generation with palera1n and it gets stuck at inflating gaster
how do I get out with this
Now its stuck in creating ramdisk
what
what
what
I just ran palera1n and it says it shld respring after 30 seconds and it hasn’t and then also the palera1n app isn’t there
Any tips?
Can I run this JB on windows?
no
the device did not boot with palera1n
retry
I did it twice, I’ll try again later
getting this problem right off the bat
what should i do
i'm running xubuntu off a USB stick
I’m using palera1n checkra1n branch and then this happened, What should i do??
Anyone have rocketbootstrap workaround working? After remount and do all, phone goes black and have to force restart
Rocketbootstrap will make your device respring loop
And i dont think any of the dev are working on it
false, you have no idea what you're talking about - you are extremely delusional
So you have it working?
could you not obviously infer that in what i said?
Hah wow
No palera1n program, but jailbreak has something to do
