#palera1n
1 messages · Page 30 of 1
sudo ./palera1n.sh --tweaks 15.7.2 --semi-tethered
what should i put first
oh
i will try
i will be back
run this first
lets vc and i will screenshare
go into general
no
ill just screenshare
its easier
error
[-] Too many arguments. Use ./palera1n.sh --help for help.
[-] An error occurred
[*] A failure log has been made. If you're going ask for help, please attach the latest log.
wtf
Hold volume down + side button (0)
Release side button, but keep holding volume down (4)
[] Device entered DFU!
[] Creating ramdisk
Archive: gaster-Linux.zip
inflating: gaster
[*] Waiting for device in DFU mode
bro you have some goofy palera1n
just do thus
so
yeah
ok
14:43), port 22
New connection for 6413->22, fd = [*] Phase 1 done! Rebooting your device (if it doesn't reboot, you may force reboot)
is it rebooting
ye
okay goodo
_timeout: 5
[libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
Found the USB handle.
[*] Booting device
[==================================================] 100.0%
[==================================================] 100.0%
wtf
flashing some random ass letters
now a loading bar like updating shi
Done!
The device should now boot to iOS
When you unlock the device, it will respring about 30 seconds after
If this is your first time jailbreaking, open the new palera1n app, then press Install
Otherwise, press Do All in the settings section of the app
If you have any issues, please join the Discord server and ask for help: https://dsc.gg/palera1n
check if losder is there
yeah
yeah
ok
just don’t update shit in sileo
wdym
itll break ur jb
dont update them
cya
this still not work on m2 macs completely?
is there any possible way to do it without
i dont feel like setting up a linux installation
that has no USB support
its a glorified vm
why does my phone get out of dfu mode while creating the ramdisk
???
once it starts the process a few seconds later my phone exits dfu mode
somebody help me
known issue with substitute, you can only use imessage when not jailbroken
I can’t rejailbreak after reboot my iphone and the only way is restore ios via itunes is there a fix for that ?
i was jailbreaking and it put my phone in recovery mode then said "CANT CONNECT TO PHONE" or whatever
and now my device wont leave recovery mode
some1 help?
palera1n | Version 1.4.1-main-40b08c4
Written by Nebula and Mineek | Some code and ramdisk from Nathan
[*] Waiting for devices
[*] Detected recovery mode device
[*] Getting device info...
ERROR: Unable to connect to device
ERROR: Unable to connect to device
ERROR: Unable to connect to device
ERROR: Unable to connect to device
[-] An error occurred
[*] A failure log has been made. If you're going ask for help, please attach the latest log.```
THERES THE LOG
sorry caps
can I use skip-fakefs with semi-tether and is it dangerous to do that ?
i jailbreak iphone 7 ios 15.7.2 successfully, then i jailbreak another iphone with same configuration and version, i get success message, but the device doesn't boot.
I deleted and re-downloaded palera1n. now it works, so is there any way to not need delete and reload palera1n?
Thanks so much!!!
Should i use paleran1n jailbreak (ios 16.2 iphone x). It’s save and stable bcz now I’m on ios12.4 use uncover some tweaks not work for me
I would stay on unc0ver
is there a way to remove the "recently added" in the music section?
A11 on 16.1.2. Dev Mode Enabled
i make all process to jailbreak but on the final step when device it reboots not self reboot after 30 seconds
so i can't see palera1n app
which is the best ios 15 version for palera1n in terms of stability?
Same Herę
broken palera1n version
must tell to Devs. A11 broken on 16.1.2
just rejailbrake it
./palera1n clean maybe?
1.4.1 broken on A11 16.1.2
i succeeded jb by using the auto ota update using A10X (no passcode and login icloud FindMy: off) then used a shortcut to launch the loader
I succeeded to jailbreak and load tweaks. I installed A-bypass which should support ios 15, then got a black screen respring forever. Rejailbreaking works but then when I go to Palera1n and try to Load Tweak or Do All, or any of the options, I get the black screen respring forever
Can't jailbreak A13 using Palerain?
I tried it before and it didn't help.
uninstall it
lol
sileo will work with tweaks not loaded
its not there, shows clean sileo
did a restore rootfs and back to jailbroken now with tweaks loaded. Any failed tweak installed will need a restore rootfs afterwards and start from beginning
download succeeded
usb_timeout: 5
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8010
Found the USB handle.
Now you can boot untrusted images.
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
Found the USB handle.
[-] An error occurred
[-] An error occurred
[*] A failure log has been made. If you're going ask for help, please attach the latest log.
What is going on?
I’m going try recloning
I’m using terminal
It looks like I need to restore rootfs
Cuz I updated in Sileo
How do I restore rootfs
i had this problem with ipad air 2 , ios 15.4.1 , is there any solution ?
Same to me
I did dfu step and I still don’t know
Hi guys. Ipad pro 1st gen iOS 16.2. I'm getting error doing patch_rsa_check
Any ideas please?
Same to me it happened to me idk how I can fix it 
How come ldrestart in new term does nothing
Anyone please help:
Trying to Palera1n iOS 16.2 iPhoneX But it says this error:
[*] Command ran: ./palera1n.sh --tweaks 16.2 --semi-tethered
palera1n | Version 1.4.1-main-40b08c4
Written by Nebula and Mineek | Some code and ramdisk from Nathan
[] Waiting for devices
[] Detected normal mode device
Hello, iPhone10,6 on 16.2!
[] Switching device into recovery mode...
Telling device with udid 6b8fa42e52f62c036e6b3aee24650fb1c84163c2 to enter recovery mode.
Device is successfully switching to recovery mode.
[] Waiting for device in recovery mode
[] Getting device info...
[] Press any key when ready for DFU mode
Get ready (0)
Hold volume down + side button (0)
Release side button, but keep holding volume down (5)
[] Device entered DFU!
No matching processes belonging to you were found
[-] An error occurred
[] A failure log has been made. If you're going ask for help, please attach the latest log.
if you are using usbc, try usba
Palera1n iOS 16.2 iPhoneX, Got Success and Device booted too, But no Palera1n app on springboard. Can anyone help please?
How do I get my phone out of a recovery mode loop
Do I really have to reset it again
same thing with same device and ios version happened to me
Solution?
I'm trying to remove A-bypass, but need read/write permission on rootfs. I ran the remount rootfs as read/write in palera1n but it resprings forever. Any idea what is going on
Unfortunately, I have not found any yet.
did you restore an iTunes backup? @patent elk
same here 😦
[==================================================] 100.0%
[==================================================] 100.0%
[==================================================] 100.0%
[==================================================] 100.0%
[==================================================] 100.0%
[==================================================] 100.0%
[==================================================] 100.0%
[] Removing Jailbreak
mv: /mnt6/8FCC82C75CB4286BB7729148E83F53B7487D780EF58A1B03B4D65FE4EDAD7D72A94E5653BD69004CDDDA3A6287BFE68F/System/Library/Caches/com.apple.kernelcaches/kernelcache.bak: No such file or directory
[] Done! Rebooting your device
Is bold line normal?
Not rebooting, I forced ReBoot but nothing happens, No Palaera1n App on SpringBoard... Stuck
@echo zodiac look private message
Can someone help me pls guys
I have Linux should I start terminal and paste this or I need to do something before do that
Hi i need help my iphone 8 is showing on screen the hdd icon and its frozen i try the jailbreak via ubuntu
i cannot get in to dfu mode
@silent anchor look private message pls
jw if there's any work being done on getting SEP working on A11 chips? Or is that not a thing thats going to happen
Im fairly new to the whole jailbreaking scene, I am more comfortable around android lol.
currently trying to get my a11 iphone ten into dfu with the instructions from palera1n, but it just seems to restart to home
most far we’ve got is the homebutton patch but that isnt rly sep
i doubt it really
dude i cant find the palerainapp
we went through the script
but the ipad never respringed
also i have an ipad 6th gen ios 16.2
the script didnt transfer
I tried to jailbreak an iPhone 8 64GB ios 16.2 via Palera1n, everything worked smoothly until the hard drive logo appeared on my mobile and nothing worked, then when the program crashed, I turned it on and it said that the mobile will go into recovery mode but since then nothing don't work
i even tried the shortcut trick
but it couldnt find the palerain app
the script was a success but the app was just not there and the ipad didnt respring
i cannot enter dfu mode for the life of me, ive tried like 5 diffrent times
ERROR: Could not connect to lockdownd: SSL error (-5)
ERROR: Could not connect to lockdownd: SSL error (-5)
```?
fedora linux
what device
iphone 7
looked it up online, apparently it is a pairing issue but idk how to untrust the computer then re-trust it back
idevicepair
i used idevicepair pair and still didn't work (tho the command did work, its just palera1n that still won't work)
after jailbreaking my phone app disappeared lmao
and it seems pulling up spotlight search triggers safe mode
my app store is gone too LMAO
no camera either
wtf is going on lmao
couldnt invoke power button so had to install powerapp
💀
I have tried Palera1n jailbreak but not work every time error I don’t no why
Is it possible to jailbreak from windows?
Hướng Dẫn Cài Đặt Palera1n Jailbreaki iOS 15 -16 Trên Windows
- Xin chào các bạn, trong video hôm nay mình xin chia sẽ đến các bạn cách "Hướng Dẫn Cài Đặt Palera1n Jailbreaki iOS 15 -16 Trên Windows"
Link Tải | https://tinesports.com/oto/huong-dan-cai-dat-palera1n-jailbreaki-ios-15-16-tren-windows.html
XEM THÊM |
Hướng Dẫn Jailbreak iOS 15 ...
I have tried like in this video
But not work I got error
You can downfalls Linux on usb and jailbreak than
Don’t need to install
Oh tru and then just boot from Linux?
Install Ubuntu on a 8gb usb stick or more than with rufus the iso file than boot and than try the Ubuntu don’t need install you can try also test and than load jailbreak
I have do it but do it like this video and not work I got error
Is this jailbreak windows supported
no its linux & macos
when i jailbroke with palera1n the app didnt show up but it said i was jailbroken

how the fuck do people believe videos that look like this shit?!
!t yt
YouTube is typically a very poor source of information and should be avoided. Many jailbreak YouTubers promote piracy, outdated tweaks, or just flat out fake jailbreaks. Reliable sources: iOS Guide, r/jailbreak Wiki, Apple Database and The iPhone Wiki.
make your iphone name not just one space, or one period, or whatever weird name it is
Meaning what sorry I don’t understand
Nothing came up bro lol
that's the point
you can make the name blank by putting in one space
Ok I’ll try that cheers
no but like
don't set it to some crap like that
because palera1n devs have a skill issue, and they don't escape device names
It was only what ever the script was when I copied it
In the device settings itself on ubuntu
don't make it something like this
no, not on the computer
on the phone itself
Like so
It wasn’t lol
oh
Fuck me really lol
yes
16.2.0 isn't correct because there was no 16.2.1 (iirc)
Nothing still stuck fml
are you on AMD?
Yeah
If you’re on AMD/Ryzen, you may be encountering a few issues when using checkra1n. This can vary between freezes and straight up crashes. It’s because of AMD’s weird drivers that cause it not to work that well with checkra1n’s exploit. If you’re lucky you can actually successfully manage to jailbreak using checkra1n.
Tips to increase successrate:
- Plug your device into your computer's motherboard.
- Use a genuine Apple USB-A to lighting cable.
If you’re stuck on the apple logo please force reboot yourself (see: /tag reboot).
If these don’t work, try to get your hands on another computer (preferably intel), and try to use checkra1n again.
Keep trying or leave it
Is check on 16.2
even if its a complete crap laptop or whatever
Now my phones stuck in dfu lol
Does anyone know how to get the phone out of dfu
what phone do you have?
!t reboot
Hey @tight thicket, have a look at this!
iPhone 8 or newer (including all notched devices, iPhone SE 2020 and newer):
- Press volume up
- Press volume down
- Press and hold the side button for 10-20 seconds until the Apple logo appears
iPhone 7:
- Press and hold the volume down and power buttons for 10-20 seconds until the Apple logo appears
iPhone 6S/SE 2016/iPad 8th or older:
- Press and hold the home and power buttons for 10-20 seconds until the Apple logo appears
Got it sorted
I need help plz I’m using iPhone 8 Plus iOS 15.7.1 Palera1n JB
Actually I have installed checkl0ck tweak but it caused me safe mode and when I removed it and did respring and went back to Home Screen my Palera1n loader disappeared
Now plz tell do in need disable checkl0ck tweak and passcode to rejailbreak or just do it like wise
how do i fix no such path as ./palera1n.sh on macos?
Should i stay on iOS 14.6 or update to 15.6 now that Palera1n exists
Also does the compactor tweak work on Palera1n because I don’t like the default font and i just wanna make sure if i update
running into an issue where it says "ERROR: Unable to connect to device" midway through the process
The screen on my iPhone 7 turns on then off before it says that
I'm running 15.4.1 on latest Mint Linux version
If I need to send a log please ask, but I don't see anything of note in it I don't think
I've tried with two different cables (usb3 to lightning) on two different ports and have gotten same result each time. (also tried restarting my machine)
Could it still be a problem with my device/linux machine?
OK, had a closer look at the pins and there seems to be a fix so I'll update here if that works
Yes, it worked! Well thank you shouganai :)
are you in the directory where palera1n.sh is?
Is there any way to set a passcode (tweak or not) after jailbreaking with palera1n? I may back out for now simply because of that if not. But this was fun because it’s my first time messing around with a jailbreak
Checkl0ck should work
On Terminal on Mac:
[*] Booting device
[==================================================] 100.0%
[==================================================] 100.0%
Done!
The device should now boot to iOS
When you unlock the device, it will respring about 30 seconds after
If this is your first time jailbreaking, open the new palera1n app, then press Install
Otherwise, press Do All in the settings section of the app
If you have any issues, ....
**One Phone screen: **
Palera1n error charger.cpp 2266 Not Charging
After this line phone restarts, nothing happens, no Palera1n app is found on Phone.
I am stuck. Please help!
palera1n | Version 1.4.1-main-712d665
Written by Nebula and Mineek | Some code and ramdisk from Nathan
[] Waiting for devices
[] Detected DFU mode device
[] Getting device info...
[] Resetting DFU state
usb_timeout: 5
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
Found the USB handle.
[*] Booting device
[==================================================] 100.0%
[==================================================] 100.0%
Done!
The device should now boot to iOS
When you unlock the device, it will respring about 30 seconds after
If this is your first time jailbreaking, open the new palera1n app, then press Install
Otherwise, press Do All in the settings section of the app
If you have any issues, please join the Discord server and ask for help: https://dsc.gg/palera1n
Enjoy!
mine too with ios 15.7.2
fixed it
how do i fix [-] Device did not enter DFU mode, rerun the script and try again
[-] failed to enter DFU mode, run palera1n.sh again
[-] An error occurred
[*] A failure log has been made. If you're going ask for help, please attach the latest log.
and where is that log
r u using usb c
i switched to usb a
but now its stuck on waiting for devices
did you do the usbmuxd stuff
Dependency
I need to use usbmuxd or no
I have see YouTube tutorial they do a many sudo shitt before jailbreak
I need to do it or no
I need help
I encountered an issue on my attempt to jailbreak my iPhone 8 Plus thats on 15.3.1
Someone help please
What is the issue?
What is the issue?
Error log is above this message
Is anyone able to help me? This is the error log, error is in that .log file
totally new to this. i have iphone x 15.4, looking to use palera1n to jailbreak. is there any good tutorials on where to begin?
Need help someone k owns hot to restore rootfs
I've been stuck on iOS 13 on my iPhone X because i haven't wanted to lose my jailbreak, and the iOS 14 & 15 jailbreaks didn't come out until after those were done being signed.
So.. i'm debating jumping to 16.2 while it's still signed for Palera1n. The issue is that there is no SEP for my iPhone X. Is this something that is expected to change as development continues, or is this a permanent limitation for Palera1n?
If you're on 13 i suggest staying there. I regretted upgrading from 13 to 15
The old tweaks dont work anymore and not much alternatives
Sure, but developers will build forward, right? It's to the point now that a lot of regular apps don't work on devices below iOS 14.
Is anyone able to help me fix this error? The error is "Connection to localhost closed by remote host. lost connection". I've tried running the usbmuxd command as root and still no luck.
Someone please help so I can jailbreak my iPhone 8 Plus (iOS version: 15.3.1)
Hi, I have same issue like you. How do you solved it? restore rootfs and use palera!n 1.4.1 don´t work for me
I was able to but after restoring I am not able to .. Check above messages. You will understand. But what is your issue?
I find no palera!n app after succesful JB
Can someone help me jailbreak my iPhone 8 Plus which is on 15.3.1. The error is "Connection to localhost closed by remote host. lost connection". I've tried running the usbmuxd command as root and still no luck. I get the error after its inflating the rootfs and finish downloading all the stuff for it
Can someone solve our issue?
help
Found a free alternative, fakepass, on alexia’s repo
I’m going to take the shot here and test if you can set a Touch ID with fakepass on
Okay. Looks like you can’t
just saying:
- 15.6 RC is still signed
- you could still go to 15.7 or 15.7.1 using Dahlia
I have a IPhone 8 plus (A11) iOS 14.1 w/checkra1n . Should I update to 16.2 and use palera1n?
honestly no because the SEP limitations are much worse on 16.x
although as a sidenote: if you want to use SEP functionality while jailbroken you could use something like Taurine or u0
It's a unused phone which stays at home
no simcard, screen trashed lol
SEP is just for passcode lock, right?
PassCode n FaceId/TouchId
FakePass works smooth. 🙂
Can someone solve our issue?
Adding in shortcuts does not solved?
Sorry?
Just jailbreak my ipad and app did not show too
I added the app in shortcuts app
then, Sileo and Trollstore
im trying to use palera1n on iphone x running 16.2, but won't go into DFU per the instructions when running ./palera1n.sh. Any recommendations?
Wait, what? What is 15.6 RC? I don't even see that on ipsw.me. I was told that i couldn't use blobs to get to any 15.x on my X. I'll go google Dahlia!
You need to DFU manually
Awesome man you are saviour.
@patent elk https://www.reddit.com/r/jailbreak/comments/zm7z9c/help_no_palera1n_app_after_install/ Follow OP Post here....
i´ll try it right now, thk you xeieshan
@patent elk Thank @cerulean tiger ..
@cerulean tiger When I open Sileo Shortcut i just open a list of installed app and I cannot find Palera1n or Sileo here in list>
this is what happens if i put it in DFU mode first
I think you need to add Palera1n first then install Sileo through it
When I open any shortcut it bring list of all apps which dont have palera1n app. 😦
did you pass the ios version parameter? Run ./palera1n.sh --tweaks <iOS version you're on> --semi-tethered
yeah i tried ./palera1n.sh --tweaks 16.2 and gives me the same message as above
as for why you can’t see 15.6 being signed… it’s because it’s the release candidate is signed, not the final version
as for Dahlia… well here’s a guide https://ios.cfw.guide/updating-blobless
Guide on updating to unsigned firmwares without any blobs using Dallas profiles.
same for me
Great, thanks! Do i need to upgrade to 16.2, then downgrade to 15.6 RC, then use Dahlia to go to 15.7? Or can I go straight from 13.2 to 15.6RC since it's signed? I ask because what i've found so far is people downgrading from 16.x to 15.6 RC.
Also, i'm assuming that SEP won't work on my phone regardless of weather i'm on iOS 15.7 or iOS 16.2, right? You're just saying there will be more tweaks available if I do the extra work to get to 15.7?
you can go straight from 13.2 to 15.6 RC or 15.7/15.7.1
although actually let me ask… what jailbreak are you currently using now again
"a failure log has been made" how can i solve this? help;)
I'm on iPhone X, iOS 13.4 (sorry, i said 13.2 before), usually using checkra!n to jailbreak, but I can also use unc0ver in a pinch.
yeah unfortunately you don’t really have other options unless you manually saved blobs at some point
reason I asked is that Odysseyra1n and Odyssey both offer shshd which would automatically save blobs as long as you’re in a jailbroken state
Oh, i've been saving blobs forever. I have most versions available to me. But i was recently told that i can't do any kind of upgrade from my device / iOS using blobs.
I tried Odysseyra1n. That was a mistake. I used it for 3 weeks and had to get rid of it. It had too many problems, and a couple of my favorite tweaks didn't function on it.
what were your issues if you don’t mind me asking
Going to 14.3-14.8 will break Face ID until you go to 15.4+ and will also break a couple other things (though those are fixable)
Going to 15.0-15.3.1 will break Face ID until you go to 15.4+
Going to 15.4+ should be fine (as long as you use 15.6 RC SEP/Baseband)
One tweak that I like a lot is AnsweringMachine XS. On Odyssey no matter what i hit, or even if i didn't hit anything at all, it would just answer the phone heh. I tried a lot of things to make that work, including a complete reinstall of everything including the jailbreak. When i went back to checkra1n, it worked properly again.
I have to be honest I’ve never heard of that tweak
I was also getting a lot more crashes than i do on checkra1n. I could never figure out what tweak was causing it.
and to be honest about that I don’t know if it would work if you updated or not
Well, it's important enough that i get to a more modern iOS that i'm willing to live without whatever tweaks I can't get, and just be patient.
honestly if you have 15.4 or 15.4.1 blobs I would definitely consider using those
Checking, but i should
14.3 and 15.1 are also fine if you’re willing to live without ever being able to use Face ID until you restore to 15.4 or later
Well, it seems i missed 15.4. I do have 15.4.1 it though. I'd rather keep Face ID if I can. But wouldn't i lose Face ID and other SEP functions if I use palera1n on my X?
you could still re-enable/use them in stock iOS
just can’t have them enabled when in a jailbroken state
Got it. I'm jailbroken 100% of the time, so ya.. that's a tough call. No security at all. Maybe i could use a tweak to add passwords to important apps though.
I mean [[checkl0ck]] exists if you’re willing to spend money
that’s not a real passcode but it’s something
I don't mind paying the devs for their work.
That said, i guess if i'm going to break Face ID regardless, maybe i should go with 14.3. Or, when you said it breaks Face ID, does that mean all SEP stuff?
just Face ID
plus 14.3 still gives you a semi-untether option (u0 or Taurine)
although I guess I should mention the last bit - checkra1n/Odysseyra1n on 14.x also have the same SEP limitations as 15.x palera1n for A11
luckily though, CT bug exists on 14.3 so you’d be able to permasign u0 or Taurine
@patent elk Read my yesterday message: #palera1n message
Oh ok, that's good to know. Man, thanks for all the info. You're awesome. I think i can live without Face ID so long as I can still use a password.
@still meteor here https://gist.github.com/0xallie/aac55c97f7925cddcf5ec3167f85dfe8
@solemn verge any help?
when i try to enter dfu mode, i follow the steps for dfu on the palera1n console and it says dfu detected but then the apple logo shows up on the phone
anyone know what to do?
Im using a usb a to lightning cable but im using a usb a to usb c adapter
Thank you
i got it into dfu but it gets stuck at creating ramdisk and boots the phone
What is the issue actually? @agile fractal
at first i couldnt get the phone into dfu but now that I have, the phone just boots up like normal and palera1n gets stuck on creating ramdisk
Elizabeths-MBP:~ elizabeth$ cd palera1n
Elizabeths-MBP:palera1n elizabeth$ ./palera1n.sh --tweaks 16.2 --semi-tethered
[*] Command ran: ./palera1n.sh --tweaks 16.2 --semi-tethered
palera1n | Version 1.4.1-main-64644ad
Written by Nebula and Mineek | Some code and ramdisk from Nathan
[] Waiting for devices
[] Detected normal mode device
Hello, iPhone10,6 on 16.2!
[] Switching device into recovery mode...
Telling device with udid f941a6e5b9254a8b87f76eaf5ef1f1ee13ef67ab to enter recovery mode.
Device is successfully switching to recovery mode.
[] Waiting for device in recovery mode
[] Getting device info...
[] Press any key when ready for DFU mode
Get ready (0)
Hold volume down + side button (0)
Release side button, but keep holding volume down (6)
[] Device entered DFU!
[] Pwning device
usb_timeout: 5
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8015
Found the USB handle.
Stage: RESET
ret: true
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8015
Found the USB handle.
Stage: SPRAY
ret: true
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8015
Found the USB handle.
Stage: SETUP
ret: true
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8015
Found the USB handle.
Stage: PATCH
ret: true
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8015
Found the USB handle.
Now you can boot untrusted images.
[] Resetting DFU state
usb_timeout: 5
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
Found the USB handle.
[] Booting device
[==================================================] 100.0%
[==================================================] 100.0%
Done!
The device should now boot to iOS
When you unlock the device, it will respring about 30 seconds after
If this is your first time jailbreaking, open the new palera1n app, then press Install
Otherwise, press Do All in the settings section of the app
If you have any issues, ple...
i just tried to run palera1n again and it says creating ramdisk and just booted my phone like normal
What was the issue? Palera1n app not installed?
Yes, the app wasn't installed. Sorry
When I run ldrestart in NewTerm, I don’t get any error but nothing happens
Any thoughts
@maiden hedge what device by chance
oh I’m blind an iPhone
did you get the respring at all or no?
iPhone X on 16.2
it resprung but no Palera1n app on homescreen
I wiped the phone and set up as new, no passcode or apps on it yet
I wiped the phone and set up as new, no passcode or apps on it yet
Try this shortcut https://www.icloud.com/shortcuts/8cd5f489c8854ee0ab9ee38f2e62f87d
palera1n gets stuck at creating ramdisk and boots to normal OS
idk what to do ive tried different adapters and cables
Hi guys, i've a problem during use palera1n, anyone know how to resolve this issue?
waiting for connection
Requesting connecion to USB device handle 3 (serial: ramdisk tool Sep 18 2022 20:14:43), port scp: write remote "/mnt6/D63C8EEDC33270B5A22E8FC5B917B1D79FAC60C2/kpf": Failure
scp: failed to upload file binaries/Kernel15Patcher.ios to /mnt6/D63C8EEDC33270B5A22E8FC5B917B1D79FAC60C2/kpf
[-] An error occurred
[*] A failure log has been made. If you're going ask for help, please attach the latest log.
When attempting to jailbreak my iPhone 8 Plus which is on 15.3.1. I encounter this error "Connection to localhost closed by remote host. lost connection"
Any idea on how to fix it? I've tried running the usbmuxd commands from root and still no luck
This shortcut is not helping me and @patent elk
Anybody know how to get TikTok working on iOS 15.7.2? It keeps crashing within seconds of opening it
I've tried hestia and choicy neither seem to circumvent any protections that may be causing it
Jailbreaking my iPad Air 2 gives the following output:
[*] Command ran: sudo ./palera1n.sh 15.7.2
palera1n | Version 1.4.1-main-40b08c4
Written by Nebula and Mineek | Some code and ramdisk from Nathan
[] Waiting for devices
[] Detected DFU mode device
[] Getting device info...
cat: .fs-iPad5,4: Datei oder Verzeichnis nicht gefunden
[-] An error occurred
[] A failure log has been made. If you're going ask for help, please attach the latest log.
According to the palera1n.sh script, the file ".fs-Ipad5,4" gets created with the command echo"$disk" > .fs-"$deviceid" during the Jailbreaking phase. For some reason it doesnt. Anyone had the same error or has a clue?
I also deleted and recloned the whole palera1n directory, always get the same error
https://www.reddit.com/r/jailbreak/comments/zm7z9c/help_no_palera1n_app_after_install/ Follow OP Post here....
People claiming that it helped them but in my case it wasn’t. I was not able to see palera1n app on spring board.
I'm not jailbroken already- it seems like you need to be jailbroken already to use the shortcut. is that true/
when i install it on my iphone 7 plus i get "ERROR: Unable to connect to device"
are you using a usb c cable
no
ok i have a question
i want to set up palera1n on my ipad but i need a mac or linux to do so
someone told me there was a way to get a fake linux on my computer or something
does anyone know what that is?
/canijailbreak device:iPad (6th generation) version:iPadOS 15.1
Can I download it on Windows
to jailbreak a 6th gen
'.' is not recognized as an internal or external command,
Does palera1n work with Virtual Box?
what lock tweak do i use after installing the jailbreak the one that's recommended?
and which respring tweak works with the power down menu?
it does not
what's virtual box
any idea if A-Font works on ios 15.7 ?
Doesn
Virtual machine program
Are there clock widgets i can use on 16.2
is it possible to use Apple pay on a iPhone X with a palera1n jailbreak?
no
I understand, I got Success logs, and success on terminal too. What this means. Palera1n might have this bug which couple of people seeing here and this will be solved I hope.
Referring to my last post, i got it working by running sudo ./palera1n.sh 15.7.2 --tweaks. Obviously the fs-iPad5,4 file only gets created when running with --tweaks.
running without —tweaks means rootless which is broken mostly
I couldnt run it with --tweaks --semi-tethered because the pad has only 16GB, and with --tweaks only it gave me a warning
What does 'rootless' mean exactly? Is there a glossary for alle the terms somewhere around?
Would activation lock stop the jailbreak?
I'd say it is the other way around - with the jailbreak its possible to circumvent the activation lock
Tried Linux Intel and Mac but always seen to run into the inflating gaster
iPad pro 15.4.1
My device respring after phase 1 but after it’s done no respring and no any apps
Use tethered
So on my last try to jailbreak last night I decided to not mess with my phone other than doing DFU no matter how long things take. This is because I saw somewhere that someone asked how long it took for palera1n to reboot on the last respiring and the response was a while because of adding blobs or something like that. Well, that plan worked and I’m now jailbroken. The solution was to just not worry about how long it took to respring and let it do it’s thing.
For me no respring
I have nothing 8 times tried
This jailbreak is shitt
I have installed Ubuntu now my windows not work to and I have no jailbreak wow
Did you JB before using palera1n?
My iPad went from stuck on recovery mode to now boot looping and idk how to fix it can someone help me?
hahaha dont try the jb anymore its dont work it will only shitt on your phone
i have tried with 3 devices not work
9 times on iphone x not work
It’s not a bad jailbreak If it was bad there would be a lot more hate than love to the devs
for many people not work now
I just did something wrong
they need to fix it
They’re most likely working on it if a lot of people are having issues
Still doesn’t mean the jb is bad
And nobody said that the jb is bad
You must do something wrong. It's a very good jailbreak
Which device? What iOS? Linux / Mac?
iphone X ios 16.2 ubuntu
You get the successful message in the end? What command do you use?
Did you try using the shortcuts to install them? After jailbreak, use the 3 shortcuts https://www.reddit.com/r/jailbreak/comments/zm7z9c/help_no_palera1n_app_after_install/?utm_source=share&utm_medium=ios_app&utm_name=iossmf
Oh
But on my screen no Palera1n loader
And device not respring you think works than
Dm me pls private
would anyone be willing to help me install palera1n on my ipad?
i'm having some issues with the linux terminal
some screen shots will help
@crude vortex It does not help. Atleast me. Tried alott, tried restorerootfs too, tried on new computer,
All logs are successfull, at the end the iPhone restart wtih no new apps,
Shortcut dont work either.
check palera1n discord channel, you might find the solution there
is there like an instructions list of what commands to use
or is anyone willing to help me out
i have this so far
but it's being weird about the pip thing
sudo apt install python
ok so i jailbroke my ipad but there's no palera1n app
A lot of people having this issue.
Shortcut trick wont work either
ok so what should i do
can someone help me please
so for some reason whenever i'm in tweaks mode and try opening a folder it just keeps respring-ing my phone and i dont know how to get into my app to remove the issue but keeps liking to respring
and ive tried to also remove and re-install palera1n but still has my tweaks installed and still likes to respring the device when trying to open the folder
it doesn't allow me to do anything
not even the substitute app
maybe re-install my tweaks and then remove them all no?
well if the tweaks still installed then you ain’t reinstalling
🤷♂️
go to palera1n discord and ask how to restore root fs
i did and i have a text document on how to do everything but still no way of actually removing it
go to terminal plug in your device run ./palera1n.sh with the options restorerootfs tweaks and if you were semi tethered then also put semi tethered
is doing the jailbreak better in tethered or in semi-tethered?
i know its going to be a preference but in the long run what will be better for me?
Do you still have that issue? I just solved it
Im having trouble, im stuck with inflating: gaster in terminal im trying to jailbreak an ipad 6 mini with iOS 15.6
Trying to jailbreak an iphone 7 plus on iOS 15.4.1 using palera1n. Following instructions on ios cfw guide website.
Instructions are telling me to use git hub repo, but i'm on an old mac that doesn't have access to those dev tools within terminal. Anywork around?
Any videos on how to use palera1n for dummy’s lol
Update your MacOS
Or run Ubuntu from USB
does your mac not have xcode-select ?
Does home button works on iphone 7
Do u guys also have this issue where the time and date are wrong
When i click customize it corrects it, but when i hit done it gets reverted
16.2
yes
That fixed? Nice
Iphone x
Ios 16.2
Jailbreak palera1n
any tweak for password and face id?
Fake passcode for checkra1n on A11 devices running iOS 14+
OMG!
Envy that you can Palera1n while some of us cannot see Palera1n app on Springboard even after success.. @loud tide
Does palera1n work on iPhone SE 2020?
Hello! Same error here, the palera1n app not showing. What is it about the shorcut?
The thing is my phone didn't respring, btw its on 16.2 iPhone 8
I tried to install Palera1n but its giving me the following error: "[e] cannot write 'work/kcache.raw'"
Im on iOS 16.1.1 with iPhone 8
It doesnt work.
can anyone else not download apps from the appstore on ios 16 palera1n?
Thank you for this jailbreak. It worked like a charm on Arch Linux and iPhone SE 2016 with ios 15.7.2. I had issues with the serial connection (Connecting to usbmuxd failed, terminating.) even though I stopped usbmuxd service and started with sudo /usr/sbin/usbmuxd -f -p in a separate terminal before starting palera1n. But restarting usbmuxd fixed the issue and the jailbreak finished successfully, so I think this should be added to the FAQ.
I can’t install PIP from python. Did it on my amd system buy forgot how to on my intel
open Substitue, disable tweak injection, Open AppStore, Download,Update and then after done, re enable Tweak Injection.
thank you
Did shortcut work?
that's actualy a text file
I have tried everthing
actually*
sorry so what shall I do?
hmm, i really dont know, I still cant get the palerain app
It could be the Tips application once you jailbreak
palerain will be in tips
does anyone know how to fix this?
no, that's not vulnerable to checkm8
Thanks
I used another mac to clone palera1n repo and installing via script. But my jb aint successful. After success springboard don’t show palra1n app.
Where exactly?
ok i need your guys's help because i can't manage to get it to download the palera1n app
I tried to jailbreak my iPhone 8, it stayed at 0.4 for 20min and now its just spamming this text. Does anyone know how I can fix that?
im stuck here now
it takes a while
let it finish
over an hour?
its macos
u usin a usb c cable?
no usb a to lightning
what macos version
13.1 (22C65)
i have absolutely no clue then
maybe
could be "usb_timeout: 5" the problem?
Hi the palera1n app is not appearing after jailbreak
i7 ios 15.6
did it respring
is palera1n working with an mbp 2011 on macos high sierra?
Didnt respring
pretty sure it needs catalina or later
your macbook is patchable up to monterey though so its fine
Also the safari background turned purple
lmao
helo am imtriyn to instrall palera1n on my iphone 6s (15.3.1) but it tells me pip cant access ssl and i have no clue how to fix it (linux)
Idk for sure but get brew first and then install python and curl form brew if you want to give it a try.
So I would get stuck on requesting connection to usb device handle
And the device reboots when I try to restore rootfs
How do I even know what state im in
Palera1n really really sucks
is anyone else getting the delay with the "waiting for device to reboot into normal mode" after the 2nd time jailbreaking too? and then it just goes to a grey screen for awhile
im going toc see how this plays out becvause it usually never had done this before when i jailbroken it before with palera1n
I am sorry that my iphone X ios 16.2 did not respring and install any app after palera1n script completed, I had already enabled the DEV mode, did anyone have this problem before and have idea how to cover it?
Neither shortcut, nor tips, helped me
See if they help you!
are you using tethered or semi tethered JB?
semi-tethered
well, i tried both, also no install process, which isn't same as others
for tips, it shows collection instead of install, and for shortcuts, i cannot find the application when i create the shortcut
TIPS IS NOT USED FOR POGO INJECTION ANYMORE
okay, thank you for reminding.
but how do i get install the palera1n app?
it is successfully run the script, but it is not respring or installing any app
and that make me confused... sorry
Alot of users of Palera1n experiencing these issues.
@left tree
Nobody has a solution to that so far 😦
But we will have soon!
oh, happy to hear that!!!
hope it will be very soon😀
Constantly checking this channel for updates on our issue. Palera1n app not showing on springboard after successfull script run. No Respring either. Tried Shortcuts too.
No Luck! 🍀
me too
You should try with tethered, I only got palerain to work on tethered.
If it doesn’t work, try also to restore rootfs
Banking apps not working after restorefs help 🥲
Any alternative for Choicy for ios 15. SuperCell games crash upon loading
[[hestia]]
I hadn't tested just was suggesting a potential alternative
Looking into using palera1n to JB my iPad Air 2. its running iPadOS 15.7.2, will i need to downgrade first?
no
Guys I tried tethered and palera1n appeared
I guess for now we have to be tethered
but is everything works after palera1n install?
idk about roor
i just think if the problem only happened on ios 16 only, then i can try to downgrade it and palera1n it
yeah i have root
since what i need to do is to put the burp cert into my iphone, if it does not own the root privilege, it may not work
good
i can access it in filza
cool!!!!!
so right now, we need to switch the script from --semi-tethered to --tethered?
just delete this part
i rootfs before
ugh didnt realize that you need to have access both to the device while plugged in AND the computer running the script.
I have a ubuntu server in separate room that i am remoting into and now im sprinting across my house to enter dfu in the 3 seconds i have
i wonder if i jb with semi tether again, would it stay
i saw someone mentioned that it is working by restoring rootfs and re-jb again
but i am not sure how to restoring rootfs, as it does not mentioned on the ios.cfw.guide
i hope i found it correctly, but there is no palera1n on that page
oh, thank you,,, i get into /restoring-rootfs/
Palern1n or checkra1n for ipad
i got it to work palera1n app
I erase any jailbreak files, then made a backup with icloud, then put the phone in dfu mode and restore with iTunes, use the backup, and then palera1n
where are the jailbreak files located? did you got first a tethered jailbreak in order to delete the jailbreak files?
supposedly all the process is oks until the respring part, where it never respring
So I erase jailbreak, then backup with icloud
put the phone in dfu and restore with itunes
enable Developer mode (just in case)
run the palera1n in linux
and it finally respring
I'm testing tweaks haha
For anyone that has the following issue when trying to re-jailbreak after an iTunes iPhone restore:
Found the USB handle.
[*] Booting device
[==================================================] 100.0%
[==================================================] 100.0%
Done!
The device should now boot to iOS
When you unlock the device, it will respring about 30 seconds after
If this is your first time jailbreaking, open the new palera1n app, then press Install
Otherwise, press Do All in the settings section of the app
If you have any issues, please join the Discord server and ask for help: https://dsc.gg/palera1n
Enjoy!
For some reason it stops here after about 10 seconds and the phone won't boot at all. I had to run sudo ./palera1n.sh --restorerootfs 15.7.2
It restored the original system.
Then I had to run sudo ./palera1n.sh --tweaks 15.7.2 and it did a successful jailbreak then.
Is restore rootfs working?
All the jb stuff remained after i did it
but i cant open it
When I do Restore Root Fs. It doesnot clear fakefs as my phone showing memory filled.
Guess restore rootfs is not working
can someone help me out with this? It says it was unable to connect to my device
on linux you have to add sudo at the start of the command, otherwise it won't be able to connect in recovery.
can you try to disable semi tethered mode (semi tethered is really broken on palera1n, i never got it to run)
@sleek plaza I'll give it a try
all right
@sleek plaza it got stuck on 'Now you can boot untrusted images.' and my phone rebooted
ios
oh. normally that's the part where it boots to the ramdisk
i don't know if 16.2 really is spported by palera1n, the only thing i can recommand you is retrying
otherwise go ask inside #support of the official palera1n discord, some geniuses out there might help you out
Hey guys. I know when I reboot my ipad I'll lose jailbreak, but if I rejailbreak, will my tweaks still be there?
thanks for the help @sleek plaza
oh also you should try to install the latest version of palera1n
(git pull the repo)
maybe they applied a new fix that you didn't got on your palera1n install
1.4.1 is the latest?
do a git pull to be sure, if it dosent work reinstall the palera1n repo
i don't know sry
from my experience with semi-tethered jbs, yes they will keep your tweaks
tho i never tried with palera1n 15.0 since i'm just too scared of my jailbreak not working again lol
Brilliant, thank you. I haven't had jailbreak since iOS 7 as that was the last time I had an iOS device 😂😂
no problem mate, have fun jailbreaking your device 😄
Definitely 😂😂
Yes.
No recent commits by the team, Last commit was on 25 December 2022 at 4:26:42 PM GMT
hi
hi
still no jjailbreak for ios 16 iphone 13 ?
you can jailbreak iOS 16 using palera1n
not available on iphone 13
yeah kinda sad
i'm sure they'll add support soon, i hope so
personally i'm waiting a bit before upgrading to iOS 16 on my iPad
ahahaah yeah yeah sure
hope is all we have
but i think its gonna be long , very long
yeah it prob will bruh
also i'm kinda sad cause palera1n is glitched out in semi tethered
thats crazy how jailed ios is
yeah for sure
but i guess the only solution is patience and don't upgrade to latest iOS
yeah yeah .... lets kill myself
Bruh 
i tough we were friend
i never said the opposite 💀
ahahah
rocketboostrap crash somehow
it does
but irs broken
u gotta update it from my@repo
palera1n will never support any device newer than the iphone x/8
Guys.. I've just done a reboot so I can activate appsync and I'm trying to rejailbreak my ipad, 15.6, and in the script on Linux terminal, it's pwning device then resetting dfu and it errors out with unbable to connect to device
Tiktok seems to be crashing after palera1n
@fiery steppe do you maybe have an idea? I've been having this problem for a long time
Anyone know how to solve the issue where apps from the AppStore aren’t downloading when jailbroken
what do i do now
You have to wait
just jalibroke with palera1n and idk why there is no package manager showing up?
Do you have purchases enabled?
Goto Substite, Disable Tweak Injection, Open AppStore, Download, Update, After done, Re Enable Tweak Injection.
Is palera1n more stable on iPhone 8 running ios 15 or ios 16
Alright
15
Yes
Thx
intel based PC, linux mint 21.1
no
ohhh
what phone model
iPhone SE 1st gen
ok
you need to go from recovery to dfu
boot your phone
connect to pc
./palera1n.sh —dfuhelper
cd to palera1n first
and after that re-run the script?
ok
guys how do you install palera1n through windows?
with a booteable usb with linux
palera1n | Version 1.4.1-main-40b08c4
Written by Nebula and Mineek | Some code and ramdisk from Nathan
[*] Waiting for devices
[*] Detected normal mode device
ERROR: No device found!
ERROR: No device found!
Hello, on 15.7.2!
[*] Switching device into recovery mode...
ERROR: No device found!
ERROR: No UDID specified
Usage: ideviceenterrecovery [OPTIONS] UDID
Any idea what is causing this?
can tou like use this to bounce to dfu with a busted home button
Nvm, seems that another round of update and upgrade was required
no
it needs to be entered physically
witj buttons
you need the home button
I keep getting a parse error. Ive done multiple reboots of the Linux server and multiple hard resets of the iPad but nothing has worked for me. Any suggetions
[*] Command ran: sudo ./palera1n.sh --tweaks 15.2.7 --semi-tethered
palera1n | Version 1.4.1-main-0b53c98
Written by Nebula and Mineek | Some code and ramdisk from Nathan
[*] Waiting for devices
[*] Detected normal mode device
Hello, iPad5,4 on 15.2.7!
[*] Switching device into recovery mode...
Telling device with udid eddd7efd7401152c5b1ee0746818d873a8033a99 to enter recovery mode.
Device is successfully switching to recovery mode.
[*] Waiting for device in recovery mode
[*] Getting device info...
parse error: Invalid numeric literal at line 1, column 10
[-] An error occurred
[*] A failure log has been made. If you're going ask for help, please attach the latest log.```
if someone can help me, in constantly run into the "no connected device founded" even if i try the "sudo systemctl stop usbmuxd, sudo usbmuxd -f -p" command. its on the iphone 6s, ios 15.7.2
are you using a virtual machine
Nope ubuntu on a usb stick that i boot
So one thing you can do to force it to see the connected device is make sure you have the libimobiledevice-utils package installed then run the command idevicepair pair @floral raven
Thnx i will try
Whoever made pissra1n was is on crack 🤔
Its been a frustrating experience to say the least. I get the feeling that it says it supports iPadOS 15.7.2, but it doesn't actually due to the amount of issues ive had
Still doesnt work….🥲
As for just getting it connected make sure you are:
Shutting down usbmuxd with sudo systemctl stop usbmuxd
Then i would run a apt-get update and upgrade to make sure they are good.
Then try sudo usbmuxd -f -p
Plug device in, run idevicepair pair and it should register as connected. Switch terminals and run the install. Thats as far as ive gotten and its failing on me, so maybe im doing it wrong anyway.
As i hear you have troubles to lol
i was stuck on the lock screen with the passcode screen not showing up and i had the ios 6 lock screen, so i had to shut the phone off, and either my mac was just on my side, the ssd i installed a few days ago did something, or palera1n fixed the “unable to connect to device” error that killed my ios 15.1 install and forced me to update my iphone, and my iphone booted up just fine with palera1n
I have fakepass to have a passcode without paying for checklock on my iPhone 7
Hip hop hurray All this for a 7
Hi there, I need some help, my jailbreak is success with palera1n, but palera1n apps is not showing on my homescreen.
it also doesn't respring automaticly
Can someone tell me how to fix this
how?
using the canijailbreak command says i can only use fugu
wait nvm
bruhhh everyone is having the same issue xD
it got just a little bit further @cunning fossil and now it's stuck again
that's what usbmuxd log says
this... did not really do the trick
but not closing the usbmuxd window and running palera1n installer as root did
are all tweaks in palera1n repo works on ios15 ?
Guys does anyone know a solution for this, ipad air 2 ios 15.4 .1
or is there any other jailbreaks that can work
How to rejailbreak
I was jailbroken but had to reboot
I reran palera1n and didn’t get any error
But my iPad didn’t seem to respring
you will always need a pc to start the jailbreak
you run the same command you use to jailbreak
I reran commands and no errors but I can’t get palera1n to open
Do I need to delete the old icon first
No need mac or Linux
Jailbroken phone ran fine for a day (I installed DVirtualHome [without home button configured, it keeps respringing the device], CCSupport, CCModules and Hestia). Then I put it to charger (it did charge yesterday just fine) and now support.apple.com/iphone/restore screen appears, it won't even boot, even if I do a force restart with home + power button. This is not good. I had to restore my phone 2 times in a row in the last 2 days. A rebooting phone to unjailbroken state is one thing, but a temporarily unusable phone is a more serious one. By the way I always used the tethered mode (without --semi-tethered flag), because I hardly have 10 GB free space on the phone. Could this be the issue why it won't even boot after a crash?
yes, if your device is tethered it will not boot until you run palera1n
Oh, ok. It's my bad then. I though it only meant that it won't boot to jailbroken state on its own not that it won't boot at all.
that is semi-tethered
It is clear now, thanks!
whats the latest ios it csn jailbreak again?
palera1n works on every version
ok thx
From 15.0
yes
??
don't run it on AMD
yes
you cannot do it with AMD
because of some drivers thing
Fck
you need a macbook or an intel machine
you can make an ubuntu usb installer, and use the live install environment to jailbreak
Whats That?
I ınstall ubuntu on the complete pc?
you don't need to install ubuntu
if you make an ubuntu installer USB, you can boot into the USB (without installing it to the system) and use that environment to jailbreak
Idk how to do that
yes
ok thanks
Hey, can anyone help me with this problem? Trying to jailbreak iPhone 7 with palera1n but the phone is stuck on this logo alongside the progress bar in terminal.
ah gotcha
Should I try to unplug it and restart?
or is there some sort of command I need to input first before doing anything
No I have not
Oh sorry man forgot to clarify this is on Mac OS
Haha it’s all good I’ll try running it over again by restarting. I was just scared of bricking the phone on that
So far no luck
I tried the tether option as well to see if it would work but I get stuck at Unable to connect to device after Found USB Handle
guys when i try to make a bootable usb the device thing doesnt show up
I'm wondering if it has to do with the new Finder script that was added a few days ago?
Does anyone have a solution for this yet
it appears that iproxy is missing from the github repo.
I can confirm that adding iproxy and swapping the palera1n.sh file for the 1.4.1 one seems to be working.
is the jailbreak really 20gb? im tryiing to do the repo clone on my mac
a couple hundred mb.
can anyone help me?
try formating the usb with HPUSBDISK(you can find it on google v1.0) if that doesnt work clean up the partitions of the usb using EASEUS PARTITION MASTER(can be found cracked in getintopc.com)
guys, is there a list of supported tweaks on ios 16.1.2?
What am I doing wrong
I jailbroke successfully with palera1n once but had to reboot
Now I can’t seem to get back into jail real
I use same commands and don’t get errors in terminal
I'm using vmware running mac os to jailbreak iphoneX ios15.6 but it stucks at this section for a long time what's wrong with it?
virtual machines will not work
does DLGMemor Injected work on ios 15?
thanks 👍🏼
the same happens to me! I have tried to restore rootfs but it stays there!
some help?
there a guied for this ?
I tried installing a tweak to hide jailbreak files to make some of my apps and games containing a "jailbreak protection" run
now I'm stuck with a not working app icon and this error opening at startup each time
I cannot reinstall neither uninstall it
Remove bad tweak:
ssh root@phone ip
Put password “alpine”
dpkg -r com..... (this in your case is vnodebypass)
killall springboard (restart springboard)
Same case.
Got success but iPhone didn’t re spring
Nor does it have palerain app on springboard
Can someone help me. I jailbroke my iPhone last night and powered it down. So today I install everything and got in to the palera1n app. I click do all to re-jailbreak and it gets stuck on a Respring loop
Did you install tweaks?
does touchid work with palerain ios 15.1 a8x?
Yes
Most likely a bad tweak
Which tweaks did you install?
Palera1n is still a dev jb so a lot of tweaks just bootloop it
bad tweak indeed
Help!
Ask alpha
stays there palera1n is not installed does not restore rootfs
Im on vacation and I haven’t updated palera1n after it got it’s own app
I’m quite sure you can force restart if you did semitethered
And after that restorerootfs
if I have done it, it is still there
Try to do ** Vol up, Vol down, hold power button and wait to the screen closes.**
Don’t let go of power or you’ll have to do it again
stays with the palera1n logo for a long time! I do the forced reboot and nothing! and tried to jailbreak and still the same
