#palera1n
1 messages · Page 23 of 1
do you mean open the third terminal and run again?
close the old palera1n
let me try
I’ll wait for @strong ingot ‘s update. MAybe I’ll try it later. For the meantime i’m gonna use a bigger flash drive for it.
the problem still same🫂
let us wait together 🤣

can you run usbmuxd --version pls
Any way to remove a bad tweak that wont uninstall or reinstall, filza wont let me, tried remounting R/W, do i have to ssh? (A11 15.5b4)
but what error do you get when you try to remove it
1.1.1
does palera require computer
yes
trollstore isnt a jailbreak, taurine and palera1n cover completely different versions
oh
cause im gonna get
ipad 7th gen
and idk what update i want it on
should I get the update that supports palera1n
?
i mean taurine is easier to use
Is it fixed? Haha
not yet🫂
Live boot usbs don't save data right? because mint says I only have 2.3gb of space left, but last time i booted I had well over 10gb of space left
(They don’t)
Hmm, weird
is decrypting ipas with palera1n possible?
How do you install usbmuxd2
Hi im new to this discord, would this jailbreak work for ios 15.7.1 on an iphone SE 2nd gen (2019)
sadly no you can't jailbreak that device yet as it has the a13 bionic chip, and Palera1n only supports chem8 devices (A5 - A11)
yeah
pretty sure frida works fine
tethered right?
I gave up, linux is too hard for me to understand and to utilize properly.
Prepare to be bullied
It builds character
Linux has been bullying me all day and I gave up. 🥹
Yea its a pain sometimes
Apparently by default, linux doesn’t detect the iphone in recovery mode even after putting the commands in. I’ve been stumped on the installation of usbmuxd2 as recommended by the palera1n creator. Sadlife.
what you trying to do?
I didn’t installed usbmuxd2 and it worked
don't believe you 

same, palera1n works for me without any funny usbmuxd shenanigans on Linux Mint
linux mint doesn't have the thingy majob that causes linux to forget about your device
Trying to install usbmuxd2 on Linux so that Linux can see my iPad in DFU mode to jailbreak it
i guess this problem happen on some devices onni
is there any way to use passcode? maybe any tweak? it is really matter for me
no
you can use passcode but for A10 or A11 you cant use passcode nor faceID
how can i use passcode?
i have a11
you cant
you can only use the passcode/faceid when jailed (not jailbroken), when jailbroken you cant use passcode/faceid
well, there were a tweak lockdown
don't
ill wait to work it on palera1n
yes for now
yes
blocked
why
This Mf gets mad so easily
haha its okay
Anyways, since your on a11 you can’t use passcode, you’ll have to wait until someone creates tweak
yup this is what i was trying to say
Yeah
😭
alr can i put my 6s in dfu without itunes? ive been getting some conflicting info, some are saying that it will only go in dfu when connected to itunes and some say its only for detecting when its in dfu. so im not sure anymore.
u need itunes open to get into DFU mode, on the newer versions of macos where there isn't iTunes, u need finder to be open (always open lol)
ok and does running itunes on wine do the job?
i kinda only have linux devices available to me
this is false
you don't need itunes to enter dfu mode
or any application for that matter
yes u do
no you don't
please tell me you didn't use a usb type c cable
correlation doesn't equal causation
is it called usb a (the other side of a cable)
😭
no it's type a
yeah
you just need a usb voltage, which means connecting it to some device, that could be a raspberry pi, pc, whatever
that's ironic
a genius spreading false information
🤨
make sure you aren't using a type c cable
palera1n will give you steps for entering dfu
steps? you sure about that?
didn't give me any steps ngl
how does checkra1n do it then
because itunes isn’t on linux
but it obviously doesn’t need itunes yes

for A10 and A11 there aren't any steps
because on A10 and A11 you need to put your device into dfu mode first (I'm on A11 so I couldn't have known that there were steps
)
palera1n detects the device mode and will send you to recovery first
then it waits for input before giving you dfu instructions
nvm its not only for A10 or A11
Put your device in DFU mode before running.
says nothing about any steps
you run ./palera1n.sh —dfuhelper first
are you maybe on a virtual maschine?
doesn't say anything about --dfuhelper in the "powerpoint documentation"
just because it says it, it doesn't mean it's true
this is a strange hill to die on

the commit is right here
who actually reads the commits
well you're failing to understand that you don't actually have to be in dfu mode first because the script detects the mode already
no seriously would a normal person trying to just jailbreak their device actually read the commits?
you don't have to read the commits to know this
you'd know by just running the script
then they should probably change their powerpoint documentation
and do not tell me that i'm spreading false information when you've been doing the exact same
would someone who is new to jailbreaking and someone who doesn't want to mess anything up run the script without doing the clear instructions? probably not
i've had to correct you multiple times
I didn't even know it automatically detected that you weren't in dfu mode
🤦♂️ wth is going on in here
anyways can you stop continuing this drama
i'm not talking about this
checkra1n running on linux
palera1n running on linux
even now saying that dfu requires itunes
thank you
Is there a way to run palera1n from windows machine like checkra1n with odysseyn1x?
odysseyn1x is just a very slimmed down version of a linux distro
we don't have that yet so you have to boot a full one for now
Ok, thanks for info
the issue is palera1n need an internet connection to run so a portable installation like odysseyn1x would have to work around that somehow
I did not know that
How about tweaks updated for iOS 15? How many of them are working?
anything that depends on rocketbootstrap is broken
And how are tweaks installed?
Oh
well as long as drivers work there could be a script to check for a connection and else run nmtui or something
From last night?
yea🥲
Well Nebula was trying to fix it who knows if they managed to
Try it out and see
I can try to help you if you’d like
Try changing ports
you mean change before start the palera1n or change when this error out
Yes before starting
alright let me try this
Alright
git pull it should be fixed
W
i rebooted, but it is still there
what is that error message? is there documentation for pogo?…
the usbmuxd problem still there after i change a port and git pull the palera1n.🥲
need help my iphone x stuck on dfu mode after i clean flash and try other version it gets dfu mode again
DispatchQueue.main.async {
if ret != 0 {
self.statusLabel?.text = "Failed to install packages \(ret)"
return
}```
so, anyone knows what error code 256 means?
🙂
palera1n/ramdisk/Linux/x86_64/img4: no such file after git pull wtf
palera1n support 15.7.1 latest if im not mistaken
do u try force restart?iphone x is press volume up then press volume down, and hold power botton to force restart
ipad mini won't go into dfu mode. When running dfuhelper I get the following message
Theresas-iMac:~ theresa$ cd palera1n
Theresas-iMac:palera1n theresa$ ./palera1n.sh dfuhelper
./palera1n.sh: line 802: syntax error near unexpected token `<<<'
Theresas-iMac:palera1n theresa$
i think you need to add — bfore dfuhelper
ok will try I didn't need it before
@solemn verge Basically, I successfully JB'ed last night. But it didnt install sileo whatsoever (even ssh'ed in to manually open it)
So restored my ipad (clean, rootfs) then tried to install Palera1n, but it wasnt work this morning, since it was apparnetly broken. Git pulled an older version as suggested and it successfully JB's but the ipad doesnt boot (black screen).
I dont know how to fix it from here haha. Apparently it COULD be because of procursus but not sure
well you could try to rootfs again and then git pull the latest commits and try again
kk gonna try
@solemn verge Yay it worked however...
how do i get sileo on here haha, can you help me sir
I thought it says sileo should be automatically installed
open the Tips app
I did, i installed everything on there
what exact iOS are you on
15.,2
do i have to manually install it or something? seems weird
ty
Yeah I JB'ed it last night and I thought i cloned the repo wrong or something
thats how i ran into the issues this morning, but now with the latest commits...still no sileo.
Pls tag me so i get a notification when u msg me!
@strong ingot could you help me help this person who somehow doesn't have Sileo after doing everything in Pogo because I'm infinitely confused what the issue would be.
on an ipad?
lol ipads have weird uicache issues
you can ssh them
then*
uiopen --path /Applications/Sileo.app
@fickle agate try that
would the loader app solve these issues or no
i did this earlier today but it just straight up said sileo wasnt there
i can try again tho
uiopen --path /Applications/Sileo-Nightly.app
we’ll probably not
because i had someone manually uicache
it didn’t show up
I love iPads 
you have to do whatever you have to do to ssh
could u help me ssh in, lol i forgot what i have to do 😦
what do i do after this lol
-.-
how do i correct this
holy shit i finally got it working..
is Sileo on the home screen
Nope ... lol
Is there a way for me to put it on the home screen so i dont have to ssh to open it
I ran uicache -all and sill doenst show anyhting
Gonna probably take the plunge on palera1n today, wish me luck
@strong ingot this is still confusing
did it open
install trollstore helper from havoc and refresh icon cache in the trollstore app
see if it appears
yes sir ty. It was the regular that worked can finally open sileo
but yeah really annoying to have to ssh to open the UI, will try trollstore helper
how come ipads function different than iphones
i have no idea
arent they just a big iphone
lmao
do you know off the top of ur head what repo i need to add to install the TrollStore
just havoc.app
Is it stuck in a loop? Iphone shows a disk icon
ugh since i have no homescreen icons
how do i open it to install trollstore lol
Ok so I ended up deleting all the palera1n folders on my mac. I recloned it and was able to get my ipad into dfu mode. Started jailbreak it was going along good had the little icon on my ipad then it was saying waiting for connection then my ipad restarted
holy shit it actually worked... @strong ingot . the installing trollstore reseting uicache
#ipadthings
ty guys
reclone the repo and retry
aight
Not sure Where to check, I know Its 2015 IPad 12.9 inch (Wifi) 1 generation
what is the difference with tether and semi tether,could someone please explain it,only know that semi tether will eat more space
!t jbtypes
Types of jailbreaks:
Tethered
The device must be booted using a computer every time, otherwise it won't boot at all. This type of jailbreak is uncommon. (e.g.: redsn0w, 4039, palera1n)
Semi-tethered
The device must be jailbroken using a computer every time it's rebooted, otherwise it will boot in unjailbroken state. (e.g.: checkra1n)
Semi-untethered
The device must be jailbroken using an app every time it's rebooted, otherwise it will boot in unjailbroken state. A computer is usually used for the initial installation, but it's not strictly necessary. (e.g.: unc0ver, Odyssey, Taurine)
Untethered
The device will stay jailbroken after a reboot, no additional action is required. This type of jailbreak is uncommon. (e.g.: Pangu9, Fugu14)
When I start Jailbreaking, It says Creating Ramdisk, and my Ipad starts booting, Is it normal?
mine also have problem auto quit dfu mode,i will just stop it and start again
i have this error it says me no such file after creating the custom kernelcache
how did you fix auto DFU quit issue?
keep starting again and again,stop the palera1n with ctrl+c and the usbmuxd as well,then boot again to DFU, after that run again the usbmuxd and palera1n tweak
🥲
sorry but what is usbmuxd?
the linux will have weird usb issue when running palera1n,so have to run the usbmuxd command before run palera1n
this two line
execute and let the terminal run at background
Bruh, For some reason it still boots right after it gets on DFU mode
yes donno why,will boot into back normal system
So, If I choose to not run palera1n, than it stays DFU mode, As soon I start it it boots up
im not sure about this,cuz everytime the weird reboot from dfu is when im running palera1n
🥲
The only reason I want to jailbreak so hard, is to Delete the fck thermalmonitod

it reboots every 3 min cuz of Thermalmonitord
lol
and filzaescaped does not even work on Ios 15
Cant even access root files to delete it
that's not gonna solve the problem
if thermalmonitord is causing your phone to reboot then it's more than likely a hardware failure
It is hardware issue, Its because of the sensor, but, Apperantly it can be bypassed if you delete thermalmonitord
I did it once on ios 14
And than my stupid brother updated to ios 15
and guess what
Its back
thats why need to keep away your phone from your brothers,nephew and your dog🤣
I already lost I think 9 cables cuz of my dog
and your kids
My kids are adults and treat me like I'm a kid and do updates to my devices all the time at least my dogs don't update my devices
Hahaha, Like i do on my dads Phone
Can it be that my Ios 15 is on beta version??
Cuz, I cant even update to ios 15.7.1 cuz of the stupid reboots
I have an ipad mini 4 was on ios 14.6 my kids updated it and now it's ios 15.7.1 and when I try to install palera1n it doesn't work when I try again later I'm going to take pictures and show them on here
Ye looks like there is Issues jailbreaking 15.7.1
Thoe, There is no way to downgrade ios ios 14 ?
From ios 15
15.7.1 should work fine - only issue I'm aware of is setuid not working but that shouldn't impact jailbreaking
Have you ever tried jailbreaking Ios beta version? Is it possible does it work?
what are you having issues with
As soon as the proccess says: Creating Ramdisk, my Ipad exits DFU mode and just boots up to normal mode
are you doing palera1n through a VM?
No mac
Ok that was wrong. This is what is happening
Question with palera1n. Not sure it's a possibility, but if it can be updated to be untethered in future or another method comes out, can the jailbreak be updated easily or required to reset and re-jailbreak?
it can’t be made anything better except a semi-tether
because it uses checkm8 and checkm8 is a bootrom bug in the USB stack
Thanks for the info. Guess I'll go through with it at some point then. If another exploit comes out that makes untethered possible though, can it be easily switched over?
git pull and try again
Theresas-iMac:palera1n theresa$ git pull
hint: Pulling without specifying how to reconcile divergent branches is
hint: discouraged. You can squelch this message by running one of the following
hint: commands sometime before your next pull:
hint:
hint: git config pull.rebase false # merge (the default strategy)
hint: git config pull.rebase true # rebase
hint: git config pull.ff only # fast-forward only
hint:
hint: You can replace "git config" with "git config --global" to set a default
hint: preference for all repositories. You can also pass --rebase, --no-rebase,
hint: or --ff-only on the command line to override the configured default per
hint: invocation.
Already up to date.
Theresas-iMac:palera1n theresa$
it probably won’t be palera1n that uses it
(but don’t expect an untethered exploit for ios 15 to ever come out)
did we get ghost pinged
OK thanks, I don't use iPhone as my main device and only really for exclusive games/apps so honestly not a super big deal if I have to stay tethered/semi-tethered.
Last time I looked into ios/jailbreak stuff was around ipod touch 4 days ha
Does it support iPad 8?
no
@solemn vergedid you see my response as to what I see when I did the git pull
Bois, I have an iPad Air 2 on 14.8.1, would y’all say I should upgrade to 15.3.1 and use palerain? I have blobs.
personally i would stay on ios 14 until ios 15 situation is better, not all tweaks work on ios 15
since your device is max 15.7.1 there’s no rush to update imo
because many tweaks still aren’t working
and A8X palera1n is iffy at times
AIght thanks
dpkg -i
sorry for noob question, how do i actually get the file on the device lol
scp or wget
scp copies the file to it via ssh
wget downloads it via a link
scp -rp -P 2222 /directory/to/file.deb root@localhost:/directory/
wget link.com/to/file.deb
you run wget in ssh
got it ty
you don’t run scp in ssh
can i just upload the file to dropbox or something or is there a specific link i need to generate
for wget or scp?
wget
hmm i cant get it to work with dropbox for some reason
Just add ?dl=1 at the end of the link! For example: via https://superuser.com/questions/470664/how-to-download-dropbox-files-using-wget-command/486351#486351
apt install wget
ty
hmm this is werid
im trying to install a 100mb file
but its only downliading 1.55mb?
it’s downloading the url
Sen link
Its prob downloading the page
ya i did, think i messed up somethinng ty
or go to Dropbox press on the drop-down menu and right click on direct download and press copy link
hmm
if i download say
DOWNLOAD.deb
do i just do
dpkg -i DOWNLOAD.deb
or am i missing somethign
im just trying to install filza to test, but feel like im doing something wrong lol @thin notch
./filza.deb
run ls and see if u can see filza.deb
sorry wahts ls
shows all files in directory
How can i fix this issue? i try volume up and down and side button then dfu mode appears again. try other ios version then this happen again and again.
does it work on M1 mac guys?guyss
manually eject any mounted images with disk utility and try again
they'll appear on the side like this
is this normal -
Theresas-iMac:~ theresa$ cd palera1n
Theresas-iMac:palera1n theresa$ git pull
hint: Pulling without specifying how to reconcile divergent branches is
hint: discouraged. You can squelch this message by running one of the following
hint: commands sometime before your next pull:
hint:
hint: git config pull.rebase false # merge (the default strategy)
hint: git config pull.rebase true # rebase
hint: git config pull.ff only # fast-forward only
hint:
hint: You can replace "git config" with "git config --global" to set a default
hint: preference for all repositories. You can also pass --rebase, --no-rebase,
hint: or --ff-only on the command line to override the configured default per
hint: invocation.
Already up to date.
Theresas-iMac:palera1n theresa$
run git log -n1
Anyone have this problem?
ERROR: Could not install packages due to an EnvironmentError: [Errno 13] Permission denied: '/Library/Python'
Consider using the --user option or check the permissions.
WARNING: You are using pip version 19.2.3, however version 22.3.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
Theresas-iMac:palera1n theresa$ git log .-n1
fatal: ambiguous argument '.-n1': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
Theresas-iMac:palera1n theresa$
Sorry noticed I typed the command in wrong here is what it says with proper command -
Theresas-iMac:palera1n theresa$ git log -n1
commit a81f71438036087a16c846b2180fecae7714d92f (HEAD -> main)
Author: guacaplushy guacaplushy@users.noreply.github.com
Date: Sun Nov 27 19:30:02 2022 +0000
Update submodules
Theresas-iMac:palera1n theresa$
just
git pull --rebase
Theresas-iMac:palera1n theresa$ git pull --rebase
Successfully rebased and updated refs/heads/main.
Theresas-iMac:palera1n theresa$
alright, now git log -n1 again
Theresas-iMac:palera1n theresa$ git log -n1
commit 813ca1abda710e8090b29e7358e6c1d1ac5ecf0b (HEAD -> main, origin/main, origin/HEAD)
Author: Tom E guacaplushy@icloud.com
Date: Fri Nov 25 18:58:54 2022 -0500
fix "failed to read lastArgFile" (#262)
if the pwd had spaces, img4tool would fail. adding quotes fixes this.
Theresas-iMac:palera1n theresa$
Ok so It should keep freezing during install then
where does it freeze?
Right at tge point of the 2nd picture then it goes to the 3rd pucture and ipad restarts from DFU Mode
maybe just reclone
Now I can't use DFU helper LOL
wiat it's working 🙂
Ok its on my ipad I opened tips I did the install and it says uicache succesful, have fun! but there is no Sileo nightly
@strong ingot could i know what is happen here
For users on Ubuntu 22.04 Jammy Jellyfish or Linux Mint 21+
Ubuntu 22.04 (which Mint 21 is based on) removes libssl1.1 and replaces it with libssl3. ideviceinfo and ideviceenterrecovery bundled with palera1n were not compiled to support it. This causes the related error when attempting to jailbreak.
Your options to fix it are to obtain a statically linked version of both binaries, use an older release of your distro, or manually install libssl1.1 that was made for an older release of Ubuntu.
Link to deb file: http://archive.ubuntu.com/ubuntu/pool/main/o/openssl/libssl1.1_1.1.1f-1ubuntu2_amd64.deb
if you are running a live version of Linux, you will need to reinstall this every time you boot into it as changes do not persist.
i would try to install the libssl 1.1,thank you bro
thanks
Getting unable to connect to device on iphone 6s on ios 15.1.
Only fix for this is to modify the ram disk and palera1n.sh but i dont know how to do that.
Can some help me do it please
can you run git log -n1 please
I will after this. I ran the jailbreak from recovery mode then to dfu mode and now i see this
I heard this might fix it
@autumn egret im worried im doing something else than jailbreaking tho.
looks fine to me
Does it do this after connecting to the device? Did i bypass the bug?
the unable to connect to device error typically occurs when it's trying to boot (either ramdisk or jb) you only got as far as the ramdisk, so it's just waiting now
@autumn egret bruh,successful pass all state but when the last part booting device not working,my phone still into dfu mode,after force restart it, the tips app force close when i tried to open
Alright. Ig i can try to modify the ramdisk and palera1n.sh now @autumn egret
read the pinned message
you haven't run the git log command yet (this is to see what commit of palera1n you're using)
and you do not need to modify either script as booting did work
you've encountered an unrelated error just now
Does this create a log file?
no
okay, that's the latest version of palera1n at the time of this message
install the deb that's pinned and run palera1n again
I have never show this before when i didnt go into recovery mode before dfu mode btw
Alright
I installed the deb file through software install. Do i just try to jailbreak again like this in the photo and i shouldn’t get that error again?
OMG
No way!
yep
@autumn egret thank you very much man appreciate it.
I have been trying to jailbreak for the past two weeks with palera1n.
btw, palera1n can automatically detect the device mode and will send you to recovery if you're not there or in dfu already
You should also add that going to recovery mode then dfu mode while jailbreaking can solve the error connecting to device if you already haven’t.
I mean in pinned messages if its not already there. Mb
Again thank you very much couldn’t have done it without you.
Does anyone success using little12 on iphone 8 plus ios 15.5? This tweak keep throwing me into safemode
You can try to disable the option for iPhone X status bar in little12 settings
Imma try
/solved
Awesome
[[GesturesXV]]
This one is made for ios 15 its pretty good
Gotta try this later.
Wait, does this apply to first time jailbreakers? Or it only applies to those who have already jailbroken their devices?
Both
Nah, i haven’t jailbroken yet, i’m having problems after the usbmuxd command and connecting the iphone while in dfu mode, linux doesn”t detect it.
I’ll try again later this week, the paleRa1n dev recommended the usbmuxd2 installation, but I’m having a hard time installing it on ubuntu live.
I’m stuck here..
Sorry for the ping,
yo,reclone palera1n should fix it,it works for me, but still having problem won't auto boot to the jailbreak system
I’m using linux mint live. So technically, Imma have to redo the steps from square one.
Everyone facing this issue when wanna jb just keep following the google and youtube will solve it for you
Yeah, I’m actually learning bit by bit. 🥹
Sorry if reading my post gets on your nerves bro, in the end I just want to jailbreak the phone 😇
Lol,you kinda misunderstanding.nvm feel free to ask anything
Advanced Tweak Configuration!
for cydia
Try broadening your search query.
[[libhooker-configurator]]
Hi, i'm trying to jailbreak with palera1n on my intel mac the version is os x 13 ventura and my two 2 device, iphone 8 with 15.6 RC and iphone X 15.6.1. But i'm always fail in picture status. I'm also trying change cable or searching resource or issue but i don't know why. Does anyone know about this issue?
they said ios 15 lol
no released jb has libhooker rn
and neither are actually detection bypasses
read pinned messages
also can you run git log -n1
oh thx. i'll try that.
@autumn egret hi,could i ask why my phone won't auto boot after last step,it keep black screen and need to force boot and it will enter normal ios system.
run ./palera1n.sh clean and try again
thanks!let me try see
I have ran everything and now my tips is showing the pogo install and tools I've clicked install and see the following installing bootstrap preparing bootstrap installing packages then uicache successful, have fun! I then close out and go to look for Sileo but it isn't there
I’m missing avahi-client 0.7 for usbmuxd2. Can anyone help?
bro it still won't auto boot🥲
According to my experience - no. Lost about a week until I realize M1 was the issue. On a late 2015 macbook pro it works.
Are you on M1?
F…. This worked.
I was able to jailbreak it. 🥹🥹🥹🥹
getting unable to connect to device error
after usind this one: ./palera1n.sh --tweaks 15.4.1
ipad air 2 is in recovery mode and connected
You on linux?
Sooo.. I’m using an iphone 6s plus with - -semi-tethered command, what do i do when the iphone reboots?
thanks
how long should it take for getting device info...
?
Do i still need to connect it to a computer?
Yeah every time you restart
can i bypass icloud lock by this?
Idk
it is doing something but now it shpws new connection for 2222... and waiting for connection
Just wait
I downgraded to ios 16.5 and still not working u-u
Am i doing something wrong ?
can you run sw_vers && git log -n1 in the palera1n folder?
it's not a fix, i just need some info first
Of course no problem ^^
@autumn egret just wanted to tell you. You are like the only helpful person in this server lol
Good thing I always have my Win Max 2 with me. Lol.
!t icloudbypass
Hey @warped coral, have a look at this!
Discussion of iCloud/Activation Lock/passcode/MDM (Mobile Device Management) bypass, asking how to do it, or posting about it is not allowed. No, it doesn't matter if the phone is yours or not. We will not help you with it. If you do own it, it’s recommended to use the links below.
If you forgot your Apple ID - Apple Support
If you forgot your Apple ID password - Apple Support
How to remove Activation Lock - Apple Support
If you forgot the passcode on your iPhone, or your iPhone is disabled - Apple Support
ok sorry
the second command was git log -n1 (number one)
What is the difference in rc and normal
Oh ok
not much, just that 15.6 RC is a beta firmware that's still signed
(rc means release candidate)
alright, run bash -x palera1n.sh --semi-tethered 15.6 --tweaks
don't use sudo
was just checking your macOS and palera1n version
Ok
Let me try ^^
I got that
I don’t understand
On YouTube the guy who make the tuto for him is working working
from what it looks like, the script is attempting to download gaster
curl -smakes the output of curl silent
so, you should manually run curl -LO https://nightly.link/palera1n/gaster/workflows/makefile/main/gaster-Darwin.zip
@strong ingot maybe shouldn't silently curl in case it fails
English is not my first language
cause it seems like that's what's happening here
So i dont get all of what u say
oh that was meant for someone else, don't worry
@strong ingot bro do you know what is problem the phone won't autoboot after this?
Thanks for all your help
But it won’t work

Yes
lol my bad, but what i said is still true about -s lol
what is it doing now?
Omg, you saved my Time. Aight Ill use my ubuntu than
can anyone help me please
Iphone 7plus ios 15.7.1 Installed palera1n with Mac computer. Ran Install from TIPS but I have no Sileo. I have found things that say put into SSH mode but I am unable to do this as it doesn't work. (the directions I follow)
Can somebody help
And now this
Well mine says
My 2 terminals trying to put into ssh mode to get sileo
Here is the whole Console output :
sudo ./palera1n.sh --tweaks 15.4
[*] Command ran: sudo ./palera1n.sh --tweaks 15.4
palera1n | Version 1.3.0-main-813ca1a
Written by Nebula and Mineek | Some code and ramdisk from Nathan | Loader app by Amy
!!! WARNING WARNING WARNING !!!
This flag will add tweak support BUT WILL BE TETHERED.
THIS ALSO MEANS THAT YOU'LL NEED A PC EVERY TIME TO BOOT.
THIS ONLY WORKS ON 15.0-15.7.1
DO NOT GET ANGRY AT US IF UR DEVICE IS BORKED, IT'S YOUR OWN FAULT AND WE WARNED YOU
DO YOU UNDERSTAND? TYPE 'Yes, do as I say' TO CONTINUE
Yes, do as I say
Are you REALLY sure? WE WARNED YOU!
Type 'Yes, I am sure' to continue
Yes, I am sure
[] Enabling tweaks
[] Waiting for devices
[] Detected normal mode device
Hello, iPad6,7 on 15.4!
[] Switching device into recovery mode...
Telling device with udid 2461b7a88c980ec191baf64550539d6601b1c4a8 to enter recovery mode.
Device is successfully switching to recovery mode.
[] Waiting for device in recovery mode
[] Getting device info...
[] Press any key when ready for DFU mode
Get ready (0)
Hold home + power button (0)
Keep holding (0)
Release power button, but keep holding home button (0)
[] Device entered DFU!
[*] Creating ramdisk
usb_timeout: 5
[libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8001
Found the USB handle.
Stage: RESET
ret: true
[libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8001
Found the USB handle.
Stage: SPRAY
ret: true
[libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8001
Found the USB handle.
Stage: SETUP
ret: true
[libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8001
Found the USB handle.
Stage: PATCH
ret: true
[libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8001
Found the USB handle.
Now you can boot untrusted images.
img4tool version: 0.197-aca6cf005c94caf135023263cbb5c61a0081804f-RELEASE
Compiled with plist: YES
img4tool: failed with exception:
[exception]:
what=Failed to read shshFile
code=19529736
line=298
file=main.cpp
commit count=197
commit sha =aca6cf005c94caf135023263cbb5c61a0081804f
[-] An error occurred
you might want it to dump your blob again
so, delete the one in the blobs folder
The blob file is empty
yeah, you should delete it then
I did, It creates new one and comes with same error
what device are you trying to jb?
Ipad 12.9 1.generaition (wifi)
Might be a stupid question but on the GitHub page it mentions blackbird for A10 devices, what is this and how can I implement it?
blackbird is a SEP exploit that allows for passcode functionality on A10 devices when using checkm8 based jailbreaks
it's not really something the user can implement themselves
Ok, thank you. So this could potentially be implemented in palera1n
By the devs
I hope they do, seems to be a bit a resurge in interest of the older devices since palera1n, the second hand prices have gone up
Guide to installing palera1n on macOS
it says that I should not use semi-tethered on iphone 7 or 8
does it mean I cannot get a normal jailbreak on these devices?
Meaning if the battery goes out - I will need a laptop to boot up the phone?
yes
going to try again. I've installed palera1n I've pushed install on TIPS but I have no Sileo
Is there a palera1n injector for windows?
no, you need to boot linux or use a mac
So should i install linux?
if you must
on iphone x with ios 15.4.1, if i use palera1n to jailbreak is there any way i can get my password and face id back?
At the moment, no
I need help
you need to remove /var/containers/Bundle/Application/<UUID of com.apple.tips> via Filza and then reload icon cache
hello
Hello, I downloaded filza from sileo and when I open it, does someone help me?
It closes alone
How do I refresh icon cache
ues TrollStore
Ok thank you
Is it a good idea to use palera1n to jailbreak my main?
i'd say no
if you mean crostini (the container) then that's a no
password, yes. but it will only work in a jailbroken state as you can't jb with a password enabled (called fakepass for a reason)
will palera1n work with Banner Sounds 13?
Linux Beta Feature
Adds Google Play Store
yeah that's the container
And Linux Terminal
Oh
So how else can I jailbreak
Without Computer
palera1n needs a computer
no
Waiting palerain on windows
99% chance that never happens
How to Jaibreak ios 15.6 RC? I used IPhone 11
you don’t
@strong ingot thanks, your commands worked and i re-jbed and didn't get stuck on a black screen!
:)
any help for Sileo not showing after doing install from tips
Does jb detection tweaks work?
hi guys i got a native linux installation and done all the steps correctly the sistem says that the installation of the jailbreak il succesful but nothing happened in the phone, i have a feeling that it cant work because in this device mdm was bypassed is it that that causes problems ? (iphone 6s 32gb ios 15.7)
hi we don’t assist with stolen devices thank you have a nice day
it’s not stolen lol
it was given to my dad by the place where he works
I don't understand why you speak without first knowing or asking
then ask your father to have that device removed from the mdm
!t icloudbypass
Discussion of iCloud/Activation Lock/passcode/MDM (Mobile Device Management) bypass, asking how to do it, or posting about it is not allowed. No, it doesn't matter if the phone is yours or not. We will not help you with it. If you do own it, it’s recommended to use the links below.
If you forgot your Apple ID - Apple Support
If you forgot your Apple ID password - Apple Support
How to remove Activation Lock - Apple Support
If you forgot the passcode on your iPhone, or your iPhone is disabled - Apple Support
I’m having this problem with Sileo on 15.1 where I have tweaks installed but Sileo doesn’t know that I have them installed so it shows that it’s not installed can somebody help?
And yes I obviously repringed after installing.
ok
help im on jailbreak palera1n then i restore my device without unjailbreak then this is result now stuck on dfu mode
.
Im using windows on this pic
try 15.6, 16.1 and 16.1.1
I dont have any solution for you but try again and again
nahh im tired i think possible cost of this is motherboard
On aliexpress you can buy new but it cost +100€
guys i installed pyimg4 via pip install,but still get error
@dusk adder my dear friend as me you have to wait ckrain i think
close some apps you don’t have enough ram
help me pls
Are you jailbroken when u take that video?
thanks 
update macos
reboot and retry
Any suggestion?
Damn respring not working after installing app plist and rocket bootsrap
Any ideas? @strong ingot sorry for the ping.
ldid -s /usr/libexec/rocketd
Is this for me?
What happened, it’s like it’s stuck
click remount rw in tips
Then?
Oh.
Effin fixed it.
Thanks man hahaha
I almost had a heart attack because of it.
I’m not gonna install banner sounds 13 anymore. I say F it.
how do you guys run terminal commands like sudo apt?
my 7+ 15.7.1 got palera1n'ed but neither ssh port is open nor I can install openssh-server package or newterm 2 etc.
- all repos I add give
didn't find architectureserror
@strong ingot hi,sry to tag you again
,the the jailbreak process is smooth now, the phone finally can boot after jailbreak success,but when the phone boot,it came out apple logo,then the phone turn off, after that it show apple logo again and go into normal ios.Do you know what happened?looks like it can't enter the jailbreak os and reboot back to normal os
were you ever jailbroken with palera1n
show
did you update stuff in sileo
nope,i haven't successful jailbreak,last time it can't boot into jailbreak os
tethered?
semi tethered
what device
latest commit?
can you git pull && git checkout ios16
then retry but make sure to add --skip-fakefs
./palera1n.sh clean before
ios16 branch might fix it
@strong ingot is it correct?
yes now rejailbreak with --skip-fakefs
alright!let me try it thanks man
./palera1n.sh --semi-tethered --tweaks 15.7.1
@strong ingot after i force reboot,it pop error
or should i wait longer time to let it reboot
retry
thats weird its using rootless
should I go tethered in order to get ssh?
iirc palera1n doesn't have a ssh server/bootstrap by default like checkra1n does with dropbear
as nebula said you have rootless installed for some reason which causes the error with not finding architectures (most repos do not support rootless)
@strong ingot the phone boot up successful,but the tips app still force closing,or should i open pogo apps?what is pogo app?
if it worked the palera1n app should appear
should i reclone all and run skip fs again?
Hi is the jailbreak for ios 15.3.1 out ?
For A11 and older processors, yes, you actually sent the message in the channel of this jailbreak
you just add --semi-tethered to the command
Thank you
Now I just have to remember how to do dfu mode from recovery via a sketchy software because my phone booploops if I do it manually
I DID IT
AFTER 11 minutes isnt too bad
i forgot to remove password
ffs
@strong ingot i successful run the fake fs the phone boot up,but the apple logo still appear disappear and boot in normal system
im also at creating fakefs
but mine seems to work
i couldnt do the dfu thing because i was unable to read the text since the errors came to fast :(
the --semi-tethered doesn't work
hey, iphone 7 ios 15.7 here.. i keep getting equesting connecion to USB device handle [*] Patching the kernel
mv: /mnt6/EE10547140F43EF3A6CA9456F73D923D805DCCE1CE9A9337C8E07B3D8F7F839D35D338C96B77F15635D7A1CE302B37FE/System/Library/Caches/com.apple.kernelcaches/kernelcache: No such file or directory and eveything stops after that
restore rootfs
will do, thanks
after many many attempts and searches I actually was able to get my Sileo app to finally show up on my jb device
@strong ingot
use system_profiler SPUSBDataType 2> /dev/null
all the IOCreatePluginInterfaceForService errors are on stderr and not stdout so it still works (stderr is file descriptor 2, so 2 is sent to /dev/null)
much cleaner 
(not pinning this one since it's just a qol thing but yeah)
you can silence the errors by replacing system_profiler SPUSBDataType with system_profiler SPUSBDataType 2> /dev/null in palera1n.sh
run git pull to make sure you're on the latest version, errors have been silenced
can you pr it please
it's a two line change pr, but alright
its fine, my local copies are weird so id have to use the web editor lol
ill do it on the ios16 branch
done lol
huh, palera1n uses checkra1n kpf?
i am contributor now
if palera1n for ios 16 comes out (a13 hopefully) im updating no questions asked

i want jelbrek bruh
it wont come out for A13 cause its a checkm8 based jailbreak
and somehow you are member plus
💀
yah. but when terminal say Done, it put my phone in recovery mode instead of ios and I hold power bottom to boot to ios, Tips app has no change
What version
Installing pogo using trollstore worked for me once
Also the loader app will fix it
Coming soon ™️
7+ 15.2
Install trollstore
i have already installed trollstore
bro they not in a jailbroken state
Yeah ik
thanks. let me try
But the tips app ain’t working
because they’re not in a jailbroken state
@lusty stone are you using tethered or semi
Make sure to jailbreak with computer first
I’m using semi
restore rootfs
Isn’t semi really jank?
Can you give more specific instructions
i don't know how to do 😦
What kind of jailbreak is this
Hi
So
I updated to macos monterey
To use palera1n bcs on el capitan its not working :’(
And now i got this error
Everything work fine until this last line i dont understand why
I got the same one :))

Reboot and retry bro
Yes
No bro
It doesn’t
It will soon
1 thing though, since you have an 8+, you’ll have to restore/reset your phone in order to jailbreak (if you’ve ever set a password)
is this jailbreak easy?
sudo apt install python3-pip
has anyone successfully run this on an iphone 6s running 15.7.1?
It didn't work for me lol
Yep, took me 2 whole effin’ days to do it though.
It depends, if you’re a linux user, might be, but if you’re learning linux for the first time, then no, but you can learn though, I’m a full time windows user, I had to learn linux bit by bit before I got to jailbreak my phone.
was there anything special you had to do or just try over and over and over
Sorry to ask, but do you know how to use linux or linux commands specifically?
Because using linux was the special thing that I had to do in my part, but all of the steps are listed in ios cfw guide, just ignore the part where you need to put the device into DFU mode prior to doing the command line to install palera1n., just connect your cellphone (powered on) to the computer and the jailbreak will tell you what to do.
Oh and this step helped me immensely, because on the first day, the phone wasn’t being detected by the jailbreak. I tried this on the 2nd day and boom!
Credits to this guy right here.
Dose Checkl0ck work on palera1n?
No. Lockdown beta does, but only on the older versions of iOS 15, like 15.1
it’s --tweaks 15.6, not --tweaks -15.6
Hey anybody know what social tweaks are currently working with the jb? Rocket just crashes for me currently
If you don’t mind me asking, what’s rocket?
Rocket for instagram
It’sa tweak
Rocket crashes, Plus crashes, not sure about Rhino
🚀
Oh… thanks man, 😅
If u uninstalled it make sure u deleted rocketbootstrap too because it was sending me to a respring loop
nerd
The most powerful thing in linux just terminal command stuff,once you learn that gonna be so easy for you just go with some easy linux distro like ubuntu,pop os,linux mint
Somewhat yes
Then it’ll be easy for you, just follow the steps in order to jb.
Yeah, it was really a pain to learn at first. Good thing I know how to use windows cmd a little.
I get a bunch of errors
were they bad errors or just some you can ignore?
ones you can ignore
++ still cant get --restorerootfs --semi-tethered to work
it just says something like rootless is already semi tethered
add --tweaks
i did
something along the lines of ./palera1n.sh --tweaks 15.3.1 --restorerootfs --semi-tethered
i used the cfu web guide
i did the command to create a fakefs, the errors made me unable the go back to dfu.
then i tried to restorerootfs because i had to go in like 10 minutes, so i didnt have time to try it again
i did the command ./palera1n.sh --restorerootfs 15.3.1 --semi-tethered
and it said something about rootless is already semi tethered
https://ios.cfw.guide/removing-palera1n/ from this site
the previous command was correct
without --tweaks, it assumes rootless
oh
so the site has a spelling mistake?
ill try once more, but if it doesnt work after that, then I'm out until palera1n is like the new checkra1n
I don’t know Linux
I'm on M2 Mac, jailbroke tethered and rebooted, phone went into recovery and then I tried to rejailbreak but I get this error. Any idea what I did wrong? The phone is stuck on the disk logo picture and won't get out of recovery...
img4tool version: 0.197-aca6cf005c94caf135023263cbb5c61a0081804f
Compiled with plist: YES
Found IM4R extracting generator: ok
Saved IM4M to blobs/iPhone10,6-15.7.1.shsh2
[*] Patching the kernel
mv: /mnt6/FB2C1D62820E2C38091B12E104FF9DEADC29231CFD2FBB8AA510E1F0307962D45462723D88F8028301B0A29F799B672C/System/Library/Caches/com.apple.kernelcaches/kernelcache: No such file or directory
No such file or directory
Just —restorerootfs no need to append another option
i did semi-tethered
Restorerootfs
if i do normal it wouldnt remove the fakefs
No need to append
atleast im quite sure it wouldnt
I ady face this with semi tethered.thats why i change to tethered option
Just restoreroot fs and jb again
ady?
doesn't work
Already
Give up and wait for stable version 😭
im stuck on restore cant get out of it atleast tell me how to boot to os 😂
In the Binaries folder go to linux or darwin, in this folder has irecovery.just type irecoverydevice or irecovery the terminal will askk you to isntall irecovery,after install run irecoverny -n
Does this work for iPads as well?
Idk 😭
Wdym restore? Recovery state?
Is this the only jailbreak for iOS 15?
essentially
can't get out of recovery at all, only dfu while in terminal and right before the phone boots to start it gives that error no such file about the kernel
how do i interact with the options in the recovery file? I'm in the darwin folder and it says process completed when i double click recovery
Irecovery -n
Double click recovery???????
So i did that the apple logo came twice and its back to recovery
Am i in a recovery loop
Ok letsmove to restorerootfs
First ./palera1n.sh clean
Second ./palera1n.sh —restorerootfs
[] Waiting for devices
[] Detected recovery mode device
[*] Getting device info...
parse error: Invalid numeric literal at line 1, column 10
followed the instructions
No solution
Never face this before
no
Can you try dfu ?
when i tried to rejb, I was on recovery and the terminal said go to dfu and it went..now when i manually try it doesnt go..apple logo shows then recovery again
what options do i have now
I'm on M2 mac if it makes any difference
Not linux?
no
Then you can restore it using future restore
If i at you place,i choose to try again and again
Save blobs somewhere
Reclone the repo and doit again
Or you can go to palerain discord
Bro I think this is the bane of my current setup, glad I wasn’t being paranoid. Uninstalling
Anytime you try to remove a tweak after installing it, it sends the phone into a black screen loop
Sucks with how much that tweaks needed for other things too.
Yes that’s because of rocketbootstrap
rbs is working for me 💀
What device/os
I have an iphone 7plus with IOS 15.7.1 jb with palera1n and I can't get RBS to work. It puts my device in a black screen loop so now I won't download any tweak that needs RBS to work
Same on X 15.3.1
Think I’ll try libMRYIPC as a replacement for RBS..
Oh and I forget who was asking the other day, but this is one of my fave tweaks lately..
Violet
how can i jailbreak when i have a windows computer?
boot linux
dualboot linux (i prefer ubuntu)
okay
No problem. Can now confirm I was wrong about Plus though.
Plus for Instagram does in-fact work, I accidentally installed the Legacy version the first time
Checkn1x on a usb or just try out a void install (my preferred distro)
Anyone know a toturial how to install this jailbreak
Does this work for iPhone 12, 15.5? Can I jailbreak
- this is the palera1n channel
- checkn1x is outdated
Oh mb
Loads of people still try to use bootra1n so I always recommend checkn1x
Anything smaller and more up to date?
odysseyn1x
it's not smaller
but not much bigger anyway
No, and never will
How is it that 50mb is still too big for you
Nah it's not 💀
