palera1n

[silent anchor]

But of course they might have issues

[fossil ruin]

been doing that and have found a few issue ones. I have learned that if it requires rocketbootstrap (bootstrapbill as I like to call it) Don't even bother getting it.

[silent anchor]

If you manage to get a GamePegion tweak let me know if it works

[fossil ruin]

will have to rejailbreak my test ipad and look tomorrow.

[tender plaza]

Fugu15 vs palera1n ? 15.1 iphone 12pro

[solemn verge]

Fugu15 doesn’t have tweaks and isn’t a valid option
palera1n will never support your device

stay where you are and you have no jailbreak

[tender plaza]

What is point of fugu15?

[solemn verge]

it’s a jailbreak for developers

[fossil ruin]

hey @solemn verge do you think it will support iphone 11

[solemn verge]

iPhone 11 is A13 so never

[fossil ruin]

do you think there will ever be a jailbreak for a13 devices

[solemn verge]

potentially up to 15.4.1? Anything past that I don’t see and anything on or past 16.1 I’m just labeling as no

[fossil ruin]

so then my 15.6 11 is probably non jailbreakable and I could update to get the fancy new icons that ios has added 🙂

[warped horizon]

problem with dual booting is that we’re limited by SEP even while tethered

so the lowest you can go is 14.0-14.3 depending on device

[median veldt]

Is this an accurate tutorial and if it's not can someone sent me a accurate tutorial

https://youtu.be/QXsQq9cJE2E

[silent anchor]

I never trust YT tuts

But on the palera1n Github there’s a tutorial linked

[median veldt]

Like a how to vid

[silent anchor]

https://ios.cfw.guide/installing-palera1n/

[silent anchor]

As long as you know how to read properly you shouldn’t have any issues

[median veldt]

How do u put iphone 8 in to dfu mode

[silent anchor]

https://youtu.be/sEupXRQmw0Q

Match the timing

[neon nebula]

Yeah that makes sense though we do have a SEP exploit for pre a11 devices and even without that wouldn’t it work as long as a passcode/Touch ID isn’t enabled? And even then custom firmware could be used as a workaround. Particularly I’m hoping it’s possible to get iOS 10 working on A10 and A10X devices because you can run 32 bit apps on that and also iOS 10 runs so buttery smooth on those devices.

[warped horizon]

A10 doesnt have 32 bit support so the apps wouldnt run

and yes we do have a SEP exploit but nobody has utilized it

CFW is off the table too

[dire pumice]

Will ever palera1n support A15 device

[ruby agate]

Never

[dire pumice]

Why

[ruby agate]

palera1n only support checkm8 device

[dire pumice]

And cheyote?

[ruby agate]

cheyote idk

[dire pumice]

Ok,thank you

[silent anchor]

A12 doesn’t even have support yet

[proven heart]

That sucks 🙁

[solemn verge]

by yet I assume you mean never

[silent anchor]

Right 😭😭

[neon nebula]

Yes it does I used to have an iPhone 7 plus on iOS 10.1.1 and it ran 32 bit apps. It’s A11 that stopped supporting the architecture altogether but the A10 wikipedia page shows the architecture support is for ARMv8.1-A: A64, A32, T32

[raw yacht]

Is it possible to run palera1n Linux on a raspberry pi zero?

[autumn egret]

all linux binaries bundled with palera1n are for x86-64

and compiling on a pi? that'll take forever lol

[silent anchor]

are there any notification tweaks that are working on iOS 15

[fierce laurel]

still be encountering one error to another error using Linux bootable, would it be more convenient and easy if I use a Mac os? (Is there also a usb bootable mac os?)

[dusty crown]

Hello guys

Is it possible to jailbreak 15.6.1 on iPhone 11

[dusty crown]

?

[rare nimbus]

would trollstore work on palera1n?

[dense umbra]

Yes, it works

[silent anchor]

Its possible bypass palera1n?

[dense umbra]

I am jailbroken on palera1n, TrollStore and all my apps are working however tweaks won’t work, I have Sileo and substitute installed but they won’t open. Tips is saying needs to update. I have ran the jailbreak several times but the same happens, I have also deleted and recloned the repo. iPhone 7 Plus 15.7.1 - any suggestions?

[pulsar plank]

Hi! when i jailbreak my iphone with palera1n, when i restart my iphone makes a black screen can you help me please ?

[severe slate]

You ran palera1n as tethered

Plug in your device to the computer and rerun palera1n

[pulsar plank]

No semi

[severe slate]

Hm

That’s weird

[pulsar plank]

I searched and I didn't find anything, just the terminal tells me that the jailbreak is done

[severe slate]

Try making a genius bar post and see if someone can help you

[uncut lynx]

What should i do when ny device is in respring for a long time

[nova gate]

Hi Sedrick. Regarding "go to DFU from recovery" I failed at least 30 times achieving this by following script's counter. Is there any trick I am missing?

[iron stump]

is pale semi tethered

[patent vale]

use ./palera1n.sh dfuhelper before jailbreak

I use checkra1n to put the phone in recovery first

so for me I would checkra1n recovery > dfuhelper > jb

[nova gate]

Thank you. Will do. Just switching to an older Mac now to see if M1 is the problem.

[patent vale]

np gl

[nova gate]

Worked, thanks Sedrick.

Now looking for a way to access home without the home button 😂

[pulsar plank]

After jailbreak my iPhone 7 the home button does’t work, can you help me please ?

[frosty karma]

will palera1n work ok iphone 7 ios 15.7?

[pale hamlet]

New plan because my Mac is basically saying “fuck you”

Linux on a PC. My PC is saying this. Dell Inspiron 15 3552 Intel Celeron N3060 4GB of ram

[long mesa]

im unable to clone the repo, is anyone able to help?

"xcrun: error: invalid active developer path (/Library/Developer/CommandLineTools), missing xcrun at: /Library/Developer/CommandLineTools/usr/bin/xcrun"

[pale hamlet]

install xcrun maybe? idk i forgot how to use a mac already sitting with linux for a few minutes

[long mesa]

tysm

[frosty karma]

i need help downloading palera1n i am on ubuntu 22.04 i want to jailbreak iphone 7 ios 15.7

[compact pier]

can't get gaster or ipwndfu to put my iPad 6 (A10) into pwndfu. tried on my macbook and my steam deck. is this just a scuffed cable, or user error?

ERROR: Exploit failed. Device did not enter pwned DFU Mode.```

either throws this or kicks me out of DFU mode.

[sour rapids]

ok so could i use a raspberry pi zero w connected to the phone with a micro usb to lightning adapter running the palera1n script be used to boot a phone

[primal orchid]

ive been jailbroken with palera1n on an ipad 6 15.0.2 for a couple days now, cant figure out why none of my apps including sileo arent showing up on my homescreen or search bar. Im able to access sileo through a short cut but other than that no other apps. Any tips?

[severe slate]

You using usb c?

[compact pier]

usb-a

with a samsung OTG adapter

farthest I got was with gaster on my mac and it started spamming status: PATCH

[gentle bone]

why cant i download filza via sileo, im on iphone 7 ios 15.7

[slow hawk]

download with trollstore

[gentle bone]

how

ehats trollstore

whats

[slow hawk]

#dopamine

it's basically a app that can permanently install ipas without revoke

[gentle bone]

ait thx

[primal orchid]

Installing troll store fixed my issue

Tried uicache and respringing before installing troll store but I guess it did something to force it

[warped horizon]

not on 15.7

the apps will only work while jailbroken

[warped horizon]

why would you ping us

you could've just joined their discord server

look at the github

are you wanting the script to be able to run on android or are you asking for sileo to run on android

[pure mist]

very urgent

[warped horizon]

thats not happening

palera1n is for ios devices

not android

[autumn egret]

pls tell me this isn’t serious

[muted glacier]

nah bruh you must be trolling 😭

ofc u got a fortnite pfp

[severe slate]

Rooting exists.

[silent anchor]

?????what should i do to solve this problem

in i6s ios15.7.1

[mint heath]

I think I'm stuck with this, what should I do?
iPhone SE 1st gen, iOS 15.7.1 in DFU mode

[cunning fossil]

use dfu helper

[mint heath]

I just realized that the site says not to use Ryzen cpus because I'll likely run into problems

But this is the only pc I've got

[cunning fossil]

try again in dfu mode

cd into palera1n

enter recovery

then type

[mint heath]

is it a problem if I'm running on a vm?

[cunning fossil]

./palera1n.sh dfuhelper

[cunning fossil]

don’t know

just do what i said

[mint heath]

oh ok

[severe slate]

Yes

[mint heath]

F

[severe slate]

Palera1n doesn’t work on vm

Live boot Linux or something

[mint heath]

k

what's the best linux version for palera1n

[stiff tree]

CIMB Bank PH

You can use A-Bypass!

Powered by ios.cfw.guide • Bypass 1 of 1

[frosty karma]

i have a question

i use palera1n and my phone shuts down cause of battery now do i need to do the thingy in terminal again to make it work cause it now on recovery mode

[stiff tree]

Alipay

You can use A-Bypass!

Powered by ios.cfw.guide • Bypass 1 of 1

[fierce laurel]

Connecting to usbmuxd failed, terminating.

[fierce laurel]

should I still wait if this displays?

[late mason]

How to jail break with palera1n

Do I need a computer

[static sage]

yes

[static sage]

follow this https://ios.cfw.guide/installing-palera1n/

[silent anchor]

I heard lockdown beta works with palera1n, is that true?

[silent anchor]

Try it

[silent anchor]

i don't want to use palera1n if i don't have any passcode or "passcode" protection

[silent anchor]

🤷‍♂️ If that’s the only jb available idk what to tell you

[fervent heart]

hello. 6s, 15.6. failed to install packages 256. what i need to do?

[coral crane]

I forgot to add the -semi-tethered flag

Now how do I boot it again?

[silent anchor]

put your device into DFU, then rerun the command you ran before to jailbreak it

(and add the semi tethered flag after the version)

[coral crane]

It is only rebooting to recovery mode

How do I make sure it’s not a bootloop?

I force restarted and it still goes to recovery

Okay got it

Wasn’t a bootloop

[silent anchor]

wait

ignore me

check pinned

[coral crane]

Yes

On it already

[silent anchor]

(restore rootfs, then rejailbreak)

[fervent heart]

do i need to rejailbreak too?

[tough thunder]

hey i got into respring loop and when i did badtweak scripts my device got into safe mode. i deleted affected tweak but still stuck in safe mode. what should i do?

[fossil ruin]

did you respring?

[tough thunder]

yeah

[tough thunder]

any help?

[fossil ruin]

no sorry I just know that when that happened to me I needed to respring

[autumn egret]

cc @strong ingot @silent anchor

[strong ingot]

i’ll make the sleeps a bit higher too

in the code

i guess older devices need more time?

although no issue with my 6s

[autumn egret]

i've seen people still have issues on a11 even

[strong ingot]

that’s weird

no issues with my A11 nor A9

[autumn egret]

i mean, if the first img4 sends, then it can only be a timing issue

(if the device doesn't do anything unexpected, that is)

[autumn egret]

better idea: check exit code of irecovery and retry on failure

it returns 255 on failure

[fierce laurel]

?

[fervent heart]

enable automount in linux settings

[autumn egret]

the commands are being run on an ios device using a ssh ramdisk, this has nothing to do with automounting in linux

[fervent heart]

it helped me though…

[tough thunder]

how to restorerootfs

i got this error

IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
Found the USB handle.
[-] An error occurred

[autumn egret]

can you try again with --debug pls

[tough thunder]

./palera1n.sh --debug ??

[autumn egret]

the same command you ran before but add --debug to the end

[tough thunder]

alr wait

[tough thunder]

[-] An error occurred

• _exit_handler
• '[' Darwin = Darwin ']'
• defaults write -g ignore-devices -bool false
• defaults write com.apple.AMPDevicesAgent dontAutomaticallySyncIPods -bool false
• killall Finder
• '[' 0 -eq 0 ']'
• exit

[autumn egret]

is that all that shows?

[tough thunder]

no

its long

download succeeded
usb_timeout: 5
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8015
Found the USB handle.
Now you can boot untrusted images.
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
Found the USB handle.
[-] An error occurred

• _exit_handler
• '[' Darwin = Darwin ']'
• defaults write -g ignore-devices -bool false
• defaults write com.apple.AMPDevicesAgent dontAutomaticallySyncIPods -bool false
• killall Finder
• '[' 0 -eq 0 ']'
• exit

[autumn egret]

okay, place your device in dfu if it isn't already
run binaries/Darwin/gaster reset then binaries/Darwin/gaster pwn

[tough thunder]

wait

done

[autumn egret]

what did gaster pwn output?

[tough thunder]

usb_timeout: 5
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
Found the USB handle.

sec output

usb_timeout: 5
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8015
Found the USB handle.
Now you can boot untrusted images.

[silent anchor]

404 not found

[autumn egret]

the alternative is manually installing a libssl1.1 deb

[silent anchor]

the link is dead

[stiff tree]

libimobiledevice

Up to date libimobiledevice builds:

• Windows: https://github.com/libimobiledevice-win32/imobiledevice-net/releases
• macOS: brew install libimobiledevice libirecovery
• Linux: https://cadoth.net/~nyuszika7h/ios-builds/libimobiledevice-static-linux.tar.gz

Added by nyuszika7h#0001 | Used 258 times · Apr 6, 2021, 11:27 PM

[silent anchor]

why manual? there's a command to install debs

[autumn egret]

oh ye it's dead

[autumn egret]

manual as in not using apt

lol

[silent anchor]

oh

what command is it then

I remember there was one that installed debs

[autumn egret]

well apt can install deb files from input as well

kinda forgot

[silent anchor]

oh for fuck sake

that linux link is also dead

[silent anchor]

yeah, both are dead

[west lichen]

Anyone know how to fix the home button not working after jailbreaking? I'm on iPhone7

[autumn egret]

there is no fix

read pins

[west lichen]

Ack. Ty

[fierce laurel]

yall know how to fix some apps crashing after jailbreak?

[coral nest]

do i have to remove my password on iPhone 7 Plus?

[solemn verge]

yes (and it’s also not recommended to use semi-tethered on the 7+)

[elder plume]

never use it i cryed when i do it my home button was undetected

[silent anchor]

You shouldn’t have your password on

[pulsar plank]

After jailbroke my iPhone 7 , the home button doesn’t work please help me

[silent anchor]

You used the --semi-tethered in the command I’m assuming by what was just said

[silent anchor]

Reboot your phone

[pulsar plank]

Yes , after reboot my home button work but i lost the jailbreak

[silent anchor]

Right, what iPhone are you on?

[pulsar plank]

7

[silent anchor]

Linux?

[pulsar plank]

Yes

[silent anchor]

Okay make sure your password is disabled and run sudo ./palera1n.sh --tweaks <iOS version you're on>

[pulsar plank]

Yes i do that

[silent anchor]

Without the semi-tethered command?

[pulsar plank]

No

I want stay to semi, it’s not good ?

[silent anchor]

“If you have an iPhone 7 or iPhone 8, don't include --semi-tethered in the command, even if you meet the aforementioned criteria to use the flag.”

[mint heath]

Is it possible to run palera1n on a vm?

[silent anchor]

💀 Probably not

[mint heath]

well f!ck

[silent anchor]

You can’t

[pulsar plank]

What’s different of tethered and semi tethered

[mint heath]

On the site it says that Ryzen cpus can and will cause issues, does this mean that using palera1n on an AMD cpu is impossible?

Or that there is a very little chance of it working

[silent anchor]

Semi-tethered you just lose jailbreak if your phone turns off/reboots and tethered you require your computer to boot

[silent anchor]

Yes

There have been multiple issues with AMD cpus

You can try to “force” it tho

[mint heath]

How?

[silent anchor]

10/10 don’t recommend

[pulsar plank]

So if i’ m not next to computer, i can’t use my phone

?

[silent anchor]

Just keep trying and see if you get lucky

[mint heath]

Ok

[silent anchor]

If it turns off or reboots pretty much

[mint heath]

I already tried three times, but it was on a vm so... 😐

I should try to boot ubuntu or smth from a USB drive

[silent anchor]

Here’s a comment from the jailbreak reddit “Untethered: Can boot normally - Boots jailbroken
Semi-untethered: Can boot jailed - can jailbreak without PC
Semi-tethered: Can boot jailed - can jailbreak with PC
Tethered: Can not even boot without connecting to PC and using JB tools”

[silent anchor]

Using a VM probably caused an issue

[silent anchor]

Try live boot Ubuntu

[mint heath]

k, I was positive because vmware recognized the iphone in dfu mode

There was written apple device (dfu mode)

I'll try disabling secure boot and hope it doesn't cause issues

[silent anchor]

And if you do have an AMD CPU don’t waste your time

[mint heath]

You're right

I'll try with a mac asap

but I don't have one

[silent anchor]

Oh

Lol

@pulsar plank all good?

[mint heath]

my dad has one, when I go to his place I'll try with his

[pulsar plank]

Yeah

[silent anchor]

Still gonna jb?

[pulsar plank]

No

[silent anchor]

W dad

I wish you luck

[mint heath]

Thanks

[silent anchor]

Why not?

[pulsar plank]

Because i didn’t want tethered jb

[mint heath]

palera1n works semi-untethered right?

[silent anchor]

Not on A10-A11

[mint heath]

oh so iPhone 7 and 8 right?

[silent anchor]

Which is iPhone 7 and above

[silent anchor]

Yup

You just have to run the command normally without the --semi-tethered flag

[mint heath]

So it doesn't work on iPhone X

or does it?

[silent anchor]

Nope

iPhone X is A12

A12 doesn’t have jb

[mint heath]

But doesn't checkm8 support a12 as well?

[silent anchor]

Oh wait

It’s A11

[mint heath]

oh ok

[silent anchor]

Does palera1n requires internet connection while writing commands or something

No

[silent anchor]

I thought it would be an A12 chip 😭

Ok thanks

[mint heath]

that's iPhone XS and XR

[silent anchor]

No problem

[silent anchor]

Just realized that 😂

[mint heath]

not a problem, I haven't got either of those lol

[thin notch]

it does work on a10-a11

i don’t know where you getting your info

it works on all a10 and a11 devices

just iph 7/8 don’t have a working home button

[thin notch]

it does

it downloads files from ipsw

[thin notch]

checkm8 doesn’t work in any vms whatsoever

[thin notch]

you can enable assistive touch

[ruby sand]

The middle button does not work in semi-tethered jailbreak on iphone 7. Appstore disappears. Settings disappear.

Help me please

15.6 palera1n

[elder plume]

💀 just remove the jailbreak, and bro next time read the guide, DONT USE SEMI-TETHERED ON IPHONE7/8

[glacial mica]

yo tf nebula just banned me from palera1n discord

@strong ingot wth man

[silent anchor]

Who said anything about it NOT working?

[silent anchor]

The home button isn’t the only issue with that

[silent anchor]

Thank you 🤌

[thin notch]

you did

#palera1n message

[silent anchor]

Bro seriously 😭 semi-tethered isn’t recommend on those chipsets

[thin notch]

from where drop the links to the docs where it says that

[silent anchor]

Sure it’ll work but it’ll come with problems

[thin notch]

I’m running semi tethered on multiple a10 and a11 devices

[silent anchor]

“If you have an iPhone 7 or iPhone 8, don't include --semi-tethered in the command, even if you meet the aforementioned criteria to use the flag.”

https://ios.cfw.guide/installing-palera1n/linux/

You do you 🤣

But don’t go telling people to follow your footsteps I’m simply giving them the information within the guide

[thin notch]

say don’t use semi tether on iPhone 7/8

not on a10/a11

there are several iPads on a10 and iPhone X that work just fine

[silent anchor]

The only other phones with that chipset is iPhone X

[silent anchor]

If I remember correctly they didn’t mention an iPad

[thin notch]

who mentioned?

[silent anchor]

I believe

[silent anchor]

The person with who I was speaking with

[thin notch]

on a11 that’s true but a10 has several ipads

[silent anchor]

Noted and thank you

[severe slate]

Why’d you ping them?

[glacial mica]

idk

[silent anchor]

💀

[glacial mica]

oh yeah she(or somone else) banned me from her server

[silent anchor]

L

[waxen trail]

Is this for iPad ios 15.1? Or no?

[severe slate]

What generation?

[waxen trail]

4th iPad Pro

[severe slate]

No

[waxen trail]

Ok thanks

[severe slate]

You can get troll store on it though

[waxen trail]

Yea thanks

[strong ingot]

why did i ban you i dont remember

no bro you just left

unless you have an alt that was banned lmao

[smoky wren]

yo, i just got palera1n on my iphone 7 but now its stuck on a blank screen. what do i do?

@severe slate ?

[silent anchor]

keep getting this error that cant connect to device ... whats happening here??

[autumn egret]

what device are you trying to jailbreak?

[silent anchor]

iphone 8

[autumn egret]

run binaries/Darwin/irecovery -s

just testing to see if that works

[glacial mica]

yeah i do

[strong ingot]

[silent anchor]

if i just enter that command says no such directtory

[strong ingot]

whats your alt

[glacial mica]

i dont have any alt

but y i cant join back

da hell

[autumn egret]

cd binaries/Darwin then irecovery -s

[autumn egret]

it doesn't exist because it's in the palera1n folder

cd there first

[glacial mica]

cd palera1n

[glacial mica]

i cant join back

tf

[strong ingot]

my brother in Christ whats your alt

[glacial mica]

i dont have any

[strong ingot]

you JUST said you did

[glacial mica]

lol i dont

actually

[strong ingot]

anyway you're not banned so you have an alt thats banned

[glacial mica]

how dh

it says the link is broken or sth

[rigid pike]

what software do i need for palera1n

“things” shall i say

[shadow flame]

For palera1n what does semi untethereted mean

[stiff tree]

a7moment

Checkra1n issues for A7 Devices on Linux Hosts
Checkra1n won’t really work for a7 devices on a Linux Host. You will need to do a replug trick and may even need to use an older version of Checkra1n.

Added by Cryptic#6293 | Used 180 times · Nov 6, 2021, 2:35 AM

[severe slate]

semi-tethered means that you can restart your phone but your jailbreak will be gone

while tethered means that you have to boot from a computer every time you restart your iPhone

[silent anchor]

?

[zinc sapphire]

Need help

File firmware/.trustcache does not exist, or is a directory
[ - ] An error occured

[silent anchor]

Reinstall?

@zinc sapphire

[proud birch]

I jailbroke my iPad (fully tethered) and my iPad restarted, so I'm just wondering what I need t odo on my computer to be able to access it as it's stuck in DFU mode right now

does it just need to be connected to the computer to exit DFU mode?

[zinc sapphire]

How, i use linux 1st day🤷‍♂️

[silent anchor]

What are you running on?

[silent anchor]

When you’re tethered you need to be connected to your computer to but

[proud birch]

okay thanks

Im going to try semi-tethered

I tried earlier, and i was getting errors, so i just decided to try tethered and that worked odly. I have 128gb of storage so that's not the problem

[zinc sapphire]

Ubuntu 20.04

[silent anchor]

I wish you luck

[silent anchor]

Go to your palera1n folder, delete it and then reinstall palera1n

[proud birch]

Thank you 🫡

[zinc sapphire]

Ok

[silent anchor]

getting this error on iphone 8 15.3.1

[proud birch]

Managed to get semi-tethered working! :D

[silent anchor]

Nice!

[silent anchor]

What command are you running to jb?

[silent anchor]

./palera1n.sh --tweaks 15.3.1

I’m not sure about Mac

[proud birch]

Try use: sudo ./palera1n.sh —tweaks 15.3.1

It worked once I used sudo

[elder plume]

is on Linux for that command

i think

am on linux and u use sudo

[silent anchor]

yeah so you are gonna need to ssh into ur device

and then run a couple commands

What commands

1 sec

You got a guide

!t newterm3

aa

[newterm3]]

[[newterm3]]

comeonn

?

@silent anchor

!t newterm

[severe slate]

💀

[teal valve]

Hello, Anyone that can help me here regarding Jailbreaking My old Ipad Pro 12.9 inch 1 generation running IOS 15.4

For Some reason it stucks on Inflating Gaster

[silent anchor]

💀

[digital garnet]

Use vm linux? Linux usb or mac os?

[teal valve]

Mac

[digital garnet]

Cannot help inot mac user T_T

[silent anchor]

What chipset is the iPad pro?

[floral cargo]

Can you even use the jailbreaking tools of palerain on a windows O.S?

I mean, it requires a mac and linux

But I only have a windows based pc

[gaunt cipher]

You can if you make a VM or boot off a usb

[floral cargo]

Yeah i guess that’s the only option

[silent anchor]

VMs don’t work

@floral cargo live boot Ubuntu

Grab a USB and flash 20.04LTS iso

And before you do make sure you don’t have an AMD CPU

https://ios.cfw.guide/installing-palera1n/linux/

Guide provided on the palera1n GitHub

[floral cargo]

Virtual box?

[silent anchor]

^ @floral cargo

To my knowledge VMs do not work with palera1n

[floral cargo]

Sad…. Thanks man!

[silent anchor]

No problem, I wish you luck 😁

[compact seal]

So does Palera1n have root?

Tried installing a deb and it got an error that said “are you root”

iPhone 7, 15.5 btw

[silent anchor]

Question is does palera1n require root

[autumn egret]

palera1n has 3 modes

• rootless (default)
• tethered (--tweaks <ios version>)
• semi-tethered (--semi-tethered <ios version> --tweaks)

[compact seal]

Yeah I just did --tweaks

So then I should have root

access

[autumn egret]

20.04 is too old though

the glibc issue

[silent anchor]

Do I keep giving the wrong version? 💀

[autumn egret]

impish is the best one

[silent anchor]

I should’ve specified that it was Ubuntu

Oops

[autumn egret]

though that's EOL, but jammy dropped libssl1.1 so jammy works too but you'd have to fix that issue manually

[silent anchor]

I meant 22.04LTS 😭

[autumn egret]

yeah but what were you installing

[compact seal]

tetherme

[silent anchor]

Apps don’t usually require root right?

[compact seal]

Instlaling it from Sileo causes Sileo to semi crash

Something about dkpg

Installing it from Terminal sends back the "Are you root" thing

[autumn egret]

you need to be root to install a deb with dpkg

lol

by default you're mobile

the command is sudo dpkg -i deb or sudo apt install /path/to/deb

[compact seal]

Oh I got it right here

could not open lock file /var/lib/dpkg/lock-frontend - open (Permission denied)

E: Unable to acquire the dpkg frontend lock

[autumn egret]

so, you ran it with sudo?

[compact seal]

ah

IS password still alipe

[silent anchor]

Default password

[autumn egret]

alpine yes

[placid merlin]

does palera1n work with 15.4.1 b4?

[solemn verge]

I don’t think there was a 15.4.1 beta 4

there is a 15.5 beta 4

[placid merlin]

what

[compact seal]

wtf

[solemn verge]

what

[compact seal]

error processing archive

[silent anchor]

I don’t think that matters tbh

[silent anchor]

What phone are you on?

[solemn verge]

true but I wonder if they’re on 15.5b4 or 15.4.1

though true device matters quite a lot more

[silent anchor]

Most likely 15.5

[placid merlin]

trollstore

[solemn verge]

that’s not an answer

[placid merlin]

what

[solemn verge]

TrollStore works on both 15.5b4 and 15.4.1

[silent anchor]

@placid merlin your answer is yes

[compact seal]

Is there a file explorer working

[silent anchor]

Palera1n does working that iOS version

[compact seal]

?

[placid merlin]

bro i mean to say 15.5 b4

im stupid

[silent anchor]

No idea check the GitHub for working iOS 15 tweaks

[silent anchor]

You’re good

[placid merlin]

when doing the run command

would i do

[silent anchor]

?

[placid merlin]

./palera1n.sh --tweaks 15.5 b4 --semi-tethered

[silent anchor]

That depends on your phone

Which you haven’t said

[placid merlin]

iphone 6

[silent anchor]

Linux?

[solemn verge]

I don’t think you would type b4 at the end with a space

[placid merlin]

mac os

[silent anchor]

Also it should be sudo ./palera1n.sh --tweaks 15.5 b4 --semi-tethered

[silent anchor]

Or not

One sec

https://ios.cfw.guide/installing-palera1n/macos/

Guide^

[autumn egret]

filza

[autumn egret]

that's not the full error

[solemn verge]

you do not include the b4

you just type 15.5

[silent anchor]

I didn’t see that

I didn’t mean to either lol

[autumn egret]

you only need sudo for linux

[silent anchor]

Plus that command is for Linux

[silent anchor]

I’m aware

That’s why I said “Or not”

hey I need some help

?

so I'm trying to do pale rain on my 7, I didn't type in semi untethered

Reboot

did it correctly, and I'm suck on "new connection for 2222-> fd=5

and no connection

and it tries endlessly

do I unplug my phone?

my phone is showing the palerain icon

so...

yeah

[silent anchor]

If you’re on an iPhone 7 you can’t semi-tether

I didn't type in semi tether

Good

I followed ioscfwguide

You shouldn’t

why

[solemn verge]

what

[silent anchor]

It’ll break your phone

[solemn verge]

@strong ingot please help this before I bleed brain cells

[silent anchor]

cfw guide is giving me good info I think

oh you mean the command

yeah no they told me not to so

I'm not

[silent anchor]

Lol what 😭

the official GitHub documentation doesn't say anything about that

[silent anchor]

Exactly

[strong ingot]

whar

[silent anchor]

They linked the guide for a reason

[solemn verge]

every sentence I read in this channel I lose more brain cells

[silent anchor]

Thankfully you followed it

[silent anchor]

You’re literally a troll

You bot

also uh do I unplug my phone.... or...

[strong ingot]

semi tether cannot break your phone, semi tether wont have home button while in jailbroken state on iphone 7-8

[strong ingot]

did you do the usbmuxd step

[silent anchor]

I'm jailbreaking to get gestures because I broke my home button in a repair : 😂

[silent anchor]

Someone said they had problems with apps when they ran the command with the semi-tether flag I consider that breaking your phone

[strong ingot]

lol

[strong ingot]

[solemn verge]

oh then you can use —semi-tethered it doesn’t even matter

[silent anchor]

yessir

[strong ingot]

i hate linux

[silent anchor]

real

[solemn verge]

I do too

[silent anchor]

😭

[strong ingot]

replug your device maybe

[silent anchor]

but it's showing the pale rain logo

will i fuck it up

[strong ingot]

replug it

[silent anchor]

ok

[strong ingot]

unplug plug back in

[compact seal]

Help me 🥺

[strong ingot]

you need to sign the deb

well the contents

[silent anchor]

I'm using udid registrations on my main iPhone because I'm a pussy LOL

[silent anchor]

did that, same result as before

what now

🗿

[solemn verge]

@silent mantle since you’re around could you update the channel description to be… you know… up to date

[silent anchor]

Is he on?

did I bork my 7

sadge

[strong ingot]

click ctrl c on the usbmuxd window then try to run sudo usbmuxd -f -p again

[solemn verge]

no you did not

[silent anchor]

It showed a grey icon 😭

[strong ingot]

no

[silent anchor]

Now she’s on DND

L

[strong ingot]

so hard to read that you cant see her pronouns are she/it

[compact seal]

The deb came straight from the repo tho

[silent anchor]

"could not open lockfile"

oh whoops I forgot sudo

[silent anchor]

Oh oops

🤦‍♂️

[strong ingot]

yeah you need to sign the binaries in it

[silent anchor]

ok restarted usbmuxd

...

no new connection still

what now? reboot PC? reboot phone?

[strong ingot]

switch ports maybe

[silent anchor]

ok

[compact seal]

Had the same problem… ended up using usbmuxd2

[silent anchor]

?

how

[strong ingot]

yea you might need to compile usbmuxd2

[compact seal]

Yeah it was a b**** to do

[silent anchor]

also usbmuxd isn't doing shit, still looping

so uh what now

compile um2

urgh how do I go about doing that

[strong ingot]

https://github.com/tihmstar/usbmuxd2

oops

there

[silent anchor]

ok so what's the steps to actually get it to run properaly

compile it, then do I still do sudo systemctl stop usbmxld

It says it in the readme btw

Bruh autocorrect

[severe slate]

[strong ingot]

you just ctrl c the current usbmuxd instance then sudo usbmuxd iirc

after compiling

[silent anchor]

😭 cow

@strong ingot how long have you been a dev?

[strong ingot]

for what

jb stuff?

[silent anchor]

Yes

[strong ingot]

not too long

[silent anchor]

I’m assuming you’re familiar with multiple coding languages

How’d you get good at identifying problems so quickly? 😭

[strong ingot]

by doing stuff over and over

[silent anchor]

W dev

"no targets specified and no makefile found. stop"

What command did you run?

Linux is ass I hate this lol

[silent anchor]

😭

[silent anchor]

./autogen.sh
make

Cow is the average spectator

ok you know what this isn't worth the fucking effort

I wish I could just checkrain this bitch

how do I quit out of this

[silent anchor]

You’re not in the flooded

Foler*

Folder*

in the folder? what folder?

😭

do I have to download something?

WAIT WTF

You’re Linux

yeah...

you didn't know that?!

I... sent Linux screenshots?

But yeah you do need a folder

where

ok you know what, how do I quit

And need to download all the requirements 😅

no

nope

fuck that

how do I abort

phone's showing the palerain logo

can I DFU restore it?

@strong ingot

[strong ingot]

!t reboot

[stiff tree]

reboot

iPhone 8 or newer (including all notched devices, iPhone SE 2020 and newer):

• Press volume up
• Press volume down
• Press and hold the side button for 10-20 seconds until the Apple logo appears

iPhone 7:

• Press and hold the volume down and power buttons for 10-20 seconds until the Apple logo appears

iPhone 6S/SE 2016/iPad 8th or older:

• Press and hold the home and power buttons for 10-20 seconds until the Apple logo appears

Added by JTV#5846 | Used 1,155 times · Mar 14, 2021, 7:51 PM

[strong ingot]

and you're done

[silent anchor]

oh that's it?

[strong ingot]

yea it didnt start yet lol

[silent anchor]

I thought I had to dfu restore

o

[strong ingot]

usbmuxd cant find the device

[silent anchor]

thanks palerain for scaring the shit out of me when it failed after making me agree to your contract twice

👍

[strong ingot]

see its just supposed to continue

[silent anchor]

o

yeah the phone isnt coming back

[strong ingot]

it will

[silent anchor]

ok

[strong ingot]

if its still at the same screen you did it wrong

[silent anchor]

it's black now

y

yipee

I have my 2016 smartphone with a broken home button back

[floral cargo]

can i just try ubuntu without installing it?

[silent anchor]

so I do want to try it again

but

I meant 22.04LTS btw

what happened there

[silent anchor]

Yes, like I said live boot

the USB thing couldn't find my phone

is it my fault?

did I do something wrong?

[silent anchor]

Check your cord

[silent anchor]

No

Cant blame yourself man

cord's fine, plugged into a USB 2.0 slot on my high end desktop

[floral cargo]

1. Download Ubuntu
2. Flash to usb via rufus
3. Shift + restart then select ubuntu?

[silent anchor]

Try a different port

ok..

USB 2.0 gave me issues

Probably because mine is…

[silent anchor]

Don’t do rufus

[floral cargo]

what

how am I supposted to boot ubuntu lol

[silent anchor]

Well actually it’s my preference

Never mind

You got it correct

[floral cargo]

do you use other flashing software?

[silent anchor]

Yes

[strong ingot]

rufus is fine

[floral cargo]

I believe I've read another flashing tool in the GPD Win Max 2 community. I can't recall what it is exactly though. I've always used rufus for my PC and Win max 2

[silent anchor]

here we go again, re trying the plainrain check whatever

[silent anchor]

Rufus works

No need to change

ok I got the icon back

[silent anchor]

what iOS version are you using for real though?

15.5

how is it

Horrible

do you miss the 16 features?

I regret upgrading

From iOS 14.0.1

oh FUCK

fuck this stupid fucking Linux

Damn 😭

connection to usbmuxd failed again

guess that's the end of my iPhone 7 jailbreak adventures for a while

why did I ever update to 15

checkrain was so easy...

[distant panther]

14.2 ftw

[silent anchor]

Same thoughts here man

at least I still have a 6 I can use for tweaks

W

Trust me if I knew more I would try and help

nah it's fine

i use android myself and wanted to get some use out my old 7

android and iPhone 8 plus

I don't even really jailbreak on my iPhones anyways, udid registrations is all I need

shut the fuck up gir

Lol

I had an 8 it was also on 14.0.1

[silent anchor]

my 8+ is on 16.2

😭

That hurts

why

that phone is as old as dirt and I can use it for iMessage with my family

I carry it with my android for iOS features

the world if apple enabled sideloading and OS modifications for people who wanted it

[floral cargo]

is there like a mod for tap - to wake for iphone 6s plus

[compact seal]

can I run succession with Palera1n

Realized a good bulk of my problems are coming from having leftover Jailbreak files

From doing a dirty update sometime ago

[floral cargo]

Wait, there's no option for jaibreaking 6s plus on the IOS CFW GUIDE

only 6 and 6s

[strong ingot]

thats where you need to restart usbmuxd

[strong ingot]

bad idea

[strong ingot]

@solemn verge ?

[silent anchor]

i did

no dice

[strong ingot]

linux moment

[solemn verge]

what

cc @strong ingot reading is hard

[strong ingot]

oh lol

[floral cargo]

I’m getting this error…. Help?

[silent anchor]

Download git

[floral cargo]

From the pailrain github?

[silent anchor]

No

😅

[silent anchor]

Run apt-get install git

[severe slate]

Rub

[glacial mica]

Rub

[silent anchor]

Oops

[glacial mica]

odysseyra1n trash

zzzzz

[silent anchor]

Pissra1n better

[floral cargo]

I hate my life. Lol

[silent anchor]

?

[floral cargo]

How about this? 🥹

[silent anchor]

@floral cargo ping next time btw

I don’t mind

Btw just in case what phone are you on?

[silent anchor]

sudo apt-get install curl

[floral cargo]

6s plus

[silent anchor]

Ok you’re good

[floral cargo]

Now it’s looking for pyimg4

[floral cargo]

Pyimg4 Not installed

Then when i press any key.

“No module named pip”

Damn

Is that pythin for linux

[strong ingot]

python3 -m ensurepip

[silent anchor]

I was gonna check if python3 was installed by default but I’m pretty sure it is

[floral cargo]

No module for pip

[strong ingot]

it is

[silent anchor]

Download it

[silent anchor]

Thank you

[silent anchor]

sudo apt install python3-pip

[floral cargo]

Python3-pip has no installation candidate.

Package may be missing but is referred to by another package.

[silent anchor]

sudo apt update

[silent anchor]

Then run the command again

[floral cargo]

Ran the update still has no installation candidate

[silent anchor]

Okay

[floral cargo]

Damn Am I screwed? 🥹

[silent anchor]

sudo add-apt-repository universe

sudo apt get-install python3-pip

[silent anchor]

Then check this

[silent anchor]

Anything?

[floral cargo]

Yep

Gotta root the ubuntu first

It’s installing right now.

[silent anchor]

Hm

[floral cargo]

The palera1n command ran.

[silent anchor]

Great

[floral cargo]

Invalid value: failed to parse image4 file

[silent anchor]

Now that’s something that I cannot help with

But hopefully they’re still online

@strong ingot

Sorry for pinging 😅

[strong ingot]

git pull and try again

[floral cargo]

I just enter the command?

[strong ingot]

yes

[floral cargo]

Running.

[floral cargo]

@strong ingot it’s still not finished.

[strong ingot]

i see

[floral cargo]

Does installing the jailbreak cost space on the disk?

[silent anchor]

On your phone?

[floral cargo]

On the usb disk.

[silent anchor]

No I don’t think

[floral cargo]

Man the phone just got recently reset so it has 20gb free space left

[silent anchor]

That’s enough

[strong ingot]

can you git pull and try again

[floral cargo]

Same error as this @strong ingot

[strong ingot]

you just did it again?

[floral cargo]

Yep

When i ran git pull

It said “up to date”

[strong ingot]

try again maybe because its not

[floral cargo]

So is there a way to undo this if it doesn’t do anything? Hahaha

[strong ingot]

what

[silent anchor]

It’s just live boot

I mean I never asked but

Can live boot cause problems? @strong ingot

[floral cargo]

I mean.

[strong ingot]

no

the person who contributed didnt test their changes lol

[silent anchor]

Okay good

[floral cargo]

I mean, can I run my phone normally after failing the installation?

[strong ingot]

@floral cargo think i fixed it, git pull and retry

[silent anchor]

W

[silent anchor]

Yes ofc

[floral cargo]

Man, I’ve jailbroken my ps4, switch v2, vita, psp 3000, 3ds ps2… never had any kind of difficulties like this one

Linux is a completely new language for me.

[strong ingot]

yea

[strong ingot]

.

[silent anchor]

I don’t think it’s Linux this time haha

[strong ingot]

git pull and try again

it really should be fixed now

lol

[floral cargo]

I’m still stuck

[silent anchor]

Where

[strong ingot]

probably bootlogo something

[floral cargo]

Here

Running again,

Wait I’m getting a different code / screen apart from earlier.

Oh hot dang

What is bootlogo.im4p anyway?

Failed to parse Image4 payload file

[strong ingot]

git pull and try again

[silent anchor]

I’m assuming you’re tweaking the GitHub

[strong ingot]

yea

[silent anchor]

W dev

[floral cargo]

Wait. I think the iphone just up and showed a disk

I might have to repeat the steps

[dusk adder]

hi guys,i have i problem while jb, it pop out error ./sshrd.sh:150:pyimg 4 :not found,i tried to install pyimg4 - sudo python3 -m pip install pying4, the error still same,sry for my bad english🥲

[floral cargo]

F it won’t go into dfu mode

[silent anchor]

You have to 😭

@strong ingot another pyimg issue

[strong ingot]

you’re not on the latest commit

git pull then try again

[dusk adder]

now is running well,thank you 🙏

[fossil ruin]

Just out of curiosity when there is an update to palera1n are we to do a restore root fs before installing it or do we just go overtop

[silent anchor]

W

[silent anchor]

I don’t think you would restore

That would just delete all your tweaks

But I don’t now much about that

[silent anchor]

You can ask them^

[floral cargo]

I think the failed jailbreak broke the iphone

I can’t enter dfu mode now.

[dusk adder]

having another issue

[dense shell]

same lmao

[dusk adder]

hahahahaa

[dense shell]

legit rn

[floral cargo]

Yup thAt appeared earlier

[silent anchor]

@strong ingot 😭 I apologize for pinging you constantly but it seems that your jb is having some sort of aneurism

[fossil ruin]

seeing all the problems ppl are having right now I'm not sure if I want to jailbreak my test ipad LOL

[dense shell]

yeah dont

[silent anchor]

This wasn’t happening earlier

[dense shell]

just lost my rose gold ip7

[silent anchor]

Don’t be over dramatic

[dense shell]

any help then?

[silent anchor]

What’s wrong with your phone atm?

[dusk adder]

same here✋

[floral cargo]

I was doing dfu mode wrong

[floral cargo]

The F.

[silent anchor]

LOL

[floral cargo]

Yep that appeared eearlier and i panicked.

[silent anchor]

Can you teach them how to get out of that state

[dense shell]

My console keeps trying over and over

[dusk adder]

how u solve that at the time

[silent anchor]

I’m not sure how DFU works on older phones?

[floral cargo]

Pulled it from the pc immediately.

Checked to see if it boots

Plugged into the wall charger.

[silent anchor]

If it’s the same as iPhone XR it should be volume up, volume down hold power button until your phone restarts

[floral cargo]

The. Turned off the iphone

Held the power button and home for ten secs like you would.

[dense shell]

iPhone 7???

[floral cargo]

Then I left holding the home button for another 5 seconds

Nah 6s plus

,

I ran it again. Getting the same screen.

[silent anchor]

Anyways I’ll be going

Hopefully you guys figure something out

[fossil ruin]

sorry I don't want to read back my eyes are hurting what are you trying to do with a iphone 7 I have a 7plus

[dusk adder]

hmmm seem everyone stuck here

[fossil ruin]

ok you are in Recovery mode and you trying to get into DFU mode or restore

[dense shell]

DFU, trying to palera1n

[floral cargo]

Yup also stuck

[fossil ruin]

what system are you trying with. Linux or mac

[dusk adder]

linux here

[dense shell]

Ubuntu Server 22.04

[floral cargo]

Linux also.

[floral cargo]

Same but i’m only using the “try option”

[dense shell]

Mines a bare box

dedicated

im just ssh'd in

[dusk adder]

at palera1n github also mention this and recommend to install usbmuxd2, but im not sure how to do that

[dense shell]

one sec

ill try that

[fossil ruin]

shoot guys I'm sorry I'm not able to help with linux but I do know that with a mac if I just restart my terminal then type in the following I can usually get my phone into DFU mode -
cd palera1n
Git pull
then with phone in Recover mode I type in this -
./palera1n.sh dfuhelper then folllow the dirrections thats How i do it

[dense shell]

Ima try this github https://github.com/tihmstar/usbmuxd2

@dusk adder try this before

[dusk adder]

ya i open this before running palara1n

let me try again

[dense shell]

@dusk adder like this

leave the scond one open

fml

[dusk adder]

hahaha

mine only run until initialize complete

[dense shell]

leave on that

[dusk adder]

but the palera1n still stuck there

[dense shell]

then open another

[dusk adder]

🥲

[dense shell]

alt - t

run palera1n

[dusk adder]

the old palera1n terminal need to close or just keep there